Elements Massage Locations Jobs in Usa

• 
  
• You will inspects completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.
  
• You will train and mentor less skilled employees. Demonstrate proper work methods and discuss viable alternatives, considerations, etc.
  
• You will perform research to continually improve trade processes and keeps shop personnel apprised of new technologies, procedures, best practices, and tooling improvements.
  
• You will assure safety and housekeeping rules are followed.
  
• You will plan, operate, and troubleshoot various types of equipment utilized to manufacture and overhaul marine components from start to post-work review.
  
• You will pass instructions received from supervisors and provides overview of tasks to be performed to other workers.
  
• You will serve as an Expert Machinist leading a group to ensure work assignments are completed.
  

• 
  
• Must be a US Citizen.
  
• Must be determined suitable for federal employment.
  
• Must participate in the direct deposit pay program.
  
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit
  
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  
• Males born after 12-31-59 must be registered for Selective Service.
  
• This is a bargaining unit position.
  
• You will be required to successfully complete a pre-appointment physical examination and complete annual physicals.
  
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  
• You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.
  
• You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
  
• Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
  
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  
• This is a Mission Essential position. You will be required to ensure organization or facility continuity of operations and/or completion of tasks that are considered essential to the mission designated by a local or command decision.
  
• Work is performed in shops and aboard ships and submarines which requires working from uncomfortable and cramped positions which involve stooping, bending, kneeling, reaching and climbing ladders.
  
• This position requires the ability to lift and carry items weighing up to 60 pounds.
  
• This position is subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
  
• This position requires rotating shift work.
  
• This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.
  
• A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.
  

• 
  
• You will be assisting journeyman Riggers in rigging up hoisting and pulling gear for lifting, moving, and positioning heavy loads.
  
• You will be assisting in fabricating, installing, and repairing standing and running rigging, wire and fiber rope items such as slings, towing bridles, nets, and other ship and boat rigging and handling of test weights.
  
• You will be operating an electric, gasoline, or diesel powered fork lift trucks which are capable of lifting loads weighing 10,000 pounds or more.
  
• You will be driving fork lift trucks over rough and sometimes muddy terrain through narrow aisles in outside storage areas.
  

• 
  
• Must be a US Citizen.
  
• Must be determined suitable for federal employment.
  
• Must participate in the direct deposit pay program.
  
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit
  
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  
• Males born after 12-31-59 must be registered for Selective Service.
  
• This may be a bargaining unit position.
  
• You may be required to successfully complete a pre-appointment physical examination.
  
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  
• This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.
  
• A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.
  
• You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
  
• Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.
  
• This position may require exposure to high noise levels.
  
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  
• This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
  
• A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
  
• You may be required to lift 100 pounds and occasionally carry equipment that weighs up to 60 pounds.
  
• Work may be performed in shops and aboard ships and submarines, which requires working from uncomfortable and cramped positions which involve stooping, bending, kneeling, reaching, and climbing.
  
• You may be required to climb vertical ladders and occasionally perform work from ladders and platforms.
  

• 
  
• You will set up and operate most types of conventional and computer numerical control machine tools such as lathes, vertical and horizontal boring mills; bench, milling machines; shapers; planers; grinders; thread cutters and drills.
  
• You will utilize many types of precision instruments and equipment such as vernier calipers, squares, protractors, micrometers, vee blocks, parallel bars, dial indicators, comparators, different gauges for accurate dimensions and tolerances.
  
• You will plan and lay out work from blueprints, work sheets, and drawings that may have missing or incorrect information.
  
• You will use shop mathematics and handbook formulas in computing and verifying dimensions in the planning, laying out, and final dimensional checking processes.
  
• You will produce desired cuts and finishes on various metals and other materials such as aluminum, brass, bronze, high carbon and alloy steels, chrome, nickel, titanium, molybdenum, super alloys, nylon, rubber, plastics, teflon, etc.
  

• 
  
• Must be a US Citizen.
  
• Must be determined suitable for federal employment.
  
• Must participate in the direct deposit pay program.
  
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit
  
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  
• Males born after 12-31-59 must be registered for Selective Service.
  
• This may be a bargaining unit position.
  
• You may be required to successfully complete a pre-appointment physical examination.
  
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  
• This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.
  
• A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.
  
• You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
  
• Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.
  
• This position may require exposure to high noise levels.
  
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  
• This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
  

• 
  
• You will perform reviews of documents associated with completed work and trade processes.
  
• You will keep shop personnel apprised of new technologies, procedures, and tooling improvements associated, approved, and adopted for welding work.
  
• You will provide process improvements and work with engineering to reduce cost and improve the overall efficiency of the welding and non-destructive test program.
  
• You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.
  
• You will train and mentor less skilled employees, demonstrate proper work methods, and discuss viable alternatives and considerations.
  
• You will serve as an Expert Welder leading a group to ensure work assignments are completed.
  

• 
  
• Must be a US Citizen.
  
• Must be determined suitable for federal employment.
  
• Must participate in the direct deposit pay program.
  
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit
  
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  
• Males born after 12-31-59 must be registered for Selective Service.
  
• This is a bargaining unit position.
  
• You will be required to successfully complete a pre-appointment physical examination.
  
• This position requires the ability to lift and carry items weighing 50 pounds.
  
• Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.
  
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  
• You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
  
• Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
  
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  
• This position requires the ability to climb vertical ladders when working aboard ships and submarines, and occasional work from ladders, platforms and staging areas.
  
• This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
  
• This position requires rotating shift work.
  
• Must hold two common welding qualifications in either SMAW, GTAW, GMAW, Flame Spray, Sub Arc, Hull Cuts, Robotic, etc.
  
• Must maintain visual inspection qualifications per VT-271.
  

• 
  
• You will install and fit parts on ships and locate positions of pieces by reference to water line, center lines, frame lines and other reference points.
  
• You will install packing, gaskets, liners and similar items where necessary.
  
• You will remove and repair or replace damaged parts of doors, hatches, and ship structures
  
• You will lay out shell, deck and bulkhead plates, I-beams, channel bar, angle bar, and other structural shapes, gun rings, struts, framing, and foundation structures and other parts from blueprints and mold loft templates.
  

• 
  
• Must be a US Citizen.
  
• Must be determined suitable for federal employment.
  
• Must participate in the direct deposit pay program.
  
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit
  
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  
• Males born after 12-31-59 must be registered for Selective Service.
  
• This may be a bargaining unit position.
  
• You may be required to successfully complete a pre-appointment physical examination.
  
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  
• A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.
  
• You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
  
• Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.
  
• This position may require exposure to high noise levels.
  
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  
• This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
  

• 
  
• You will lay out shell, deck and bulkhead plates, I-beams, channels, angles, pipe and round bar and various other structural shapes, gun rings, struts, framing and various foundation structures and other parts from blueprints and templates.
  
• You will cut and shape plates, beams and other heavy metal structural shapes, using various shop machinery.
  
• You will use precision tooling such as micrometers, feeler gauges and torque wrenches for meeting required tolerances per technical work documents when required.
  
• You will report to supervisors on the status and progress of work, nature of work delays and answer questions on overall work operations and problems.
  
• You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.
  

• 
  
• Must be a US Citizen.
  
• Must be determined suitable for federal employment.
  
• Must participate in the direct deposit pay program.
  
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit
  
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  
• Males born after 12-31-59 must be registered for Selective Service.
  
• This is a bargaining unit position.
  
• You will be required to obtain and maintain a current valid United States driver's license.
  
• You may be required to successfully complete a pre-appointment physical examination and undergo recurring physical examinations.
  
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  
• You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.
  
• You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
  
• Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
  
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  
• You will be required to obtain and maintain a U.S. Passport.
  
• This is a Mission Essential position. You will be required to ensure organization or facility continuity of operations and/or completion of tasks that are considered essential to the mission designated by a local or command decision.
  
• This position requires the ability to lift and/or carry loads or items up to 50 pounds in weight.
  
• This position may require rotating shift work.
  
• This position requires the ability to climb vertical ladders and work in awkward positions and confined spaces.
  
• This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
  

• 
  
• You will provide guidance and direction to Shipfitter shop personnel.
  
• You will provide instruction for nuclear or non-nuclear work of the Structural Group personnel in the skills of the trade.
  
• You will prepare analysis of trade requirements through the use of audits, surveillance, and/or incident reports.
  
• You will provide interpretations and problem resolution for shop employees.
  

• 
  
• Must be a US Citizen.
  
• Must be determined suitable for federal employment.
  
• Must participate in the direct deposit pay program.
  
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit
  
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  
• Males born after 12-31-59 must be registered for Selective Service.
  
• This may be a bargaining unit position.
  
• You may be required to successfully complete a pre-appointment physical examination.
  
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  
• A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.
  
• You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
  
• Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.
  
• This position may require exposure to high noise levels.
  
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  
• This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
  

Open date: October 4, 2025

Next review date: Wednesday, Mar 18, 2026 at 11:59pm (Pacific Time)

Apply by this date to ensure full consideration by the committee.

Final date: Wednesday, Mar 18, 2026 at 11:59pm (Pacific Time)

Applications will continue to be accepted until this date.

The He lab is in the Molecular and Cell Biology department at UC-Berkeley, which encompasses a breadth of disciplines spanning all levels of organization and encompassing diverse organisms. The breath of training, combined with the unique location of Berkeley in the center of biomedical research, offer a nurturing environment for the next-generation scientist to launch on a successful career in biomedical research in academia and industry. The Principal Investigator, Dr. Lin He, was awarded the MacArthur Fellowship (the genius award), the Searle Scholar, a HHMI Faculty Scholar, and is currently a Thomas and Stacey Siebel distinguished chair professor at UC-Berkeley, and a biohub investigator with the Chan-Zuckerberg Initiative (CZI).

The developmental and physiological complexity of a given organism is not governed by the sheer number of protein-coding genes. In mammals, the numerous functional non-coding elements greatly expand gene regulatory modality and diversify functional reservoir. Using human genetics/genomics, mouse genetics/genomics, cell and molecular biology approaches, the He lab at UC-Berkeley has identified a variety of functional non-coding elements, including transposons and non-coding RNAs. Not only do non-coding elements offer important developmental/physiological functions, they also provide us with a unique angle to discover new biological/cellular processes in development and disease. Combining sophisticated genome engineering and innovative live cell imaging, we have pioneered in vivo studies to elucidate the new cellular functions and molecular mechanisms in development and aging. The discoveries of the He lab have been well recognized by publications in prestigious journals, including Nature, Science and Cell. Currently, there are postdoc openings in two projects.

Transposons in mammalian preimplantation development ~40% of mammalian genome originates from transposons, whose abundance greatly exceeds that of protein genes. While historically viewed as degenerated "parasitic" DNAs, transposons yield numerous functional elements for the host genome. These sequences resulted from ancient invasion confer new mechanisms of gene regulation, generate Neogene/ncRNA functions, and provide raw material for genome innovation. Mammalian preimplantation embryos constitute one of the best systems to study transposon-host interactions, as ~20% of their transcriptome results from transposon induction. We aim to characterize the role of specific transposons in preimplantation embryos.

Transposons in aging and disease While specific transposons are integral components of host biology, most mammalian transposons are potentially detrimental to the host genomes, thus inactivated via degenerative mutations and/or transcriptional/post-transcriptional silencing. Interestingly, aberrant transposon induction has been observed in a variety of pathological conditions, including aging, cancer and infection. We aim to investigate the mechanisms underlying transposon dysregulation during reproductive aging and cancer, and to elucidate the effects of transposon-host interactions that accelerate aging and promote cancer.

Postdoc responsibilities:

1) The postdoc will work with the PI to develop a project in one of the two research directions, to comprehensively read literature, to establish appropriate experimental systems, to learn important technologies, and to execute experiments to advance the project and perform data analyses.

2) The postdoc will meet with the PI on a weekly basis to discuss results, to development experimental plans.

2) The postdoc will work with junior lab members to mentor them on specific experimental techniques .

3) The postdoc will contribute to lab duties, which is evenly distributed among all lab members.

Lab:

PhD (or equivalent international degree) or enrolled in a PhD degree program (or equivalent international degree)

Ph.D. (or equivalent international degree) required by the appointment start date. No more than three years of post-degree research experience by the start date.

Ph.D. in developmental biology, Genetics, Genomics, Cell Biology, Molecular Biology, Biochemistry or related field are all welcome to apply. Prior research experiences in mammalian development and disease are preferred.

• Curriculum Vitae - Your most recently updated C.V.

  
  

• Cover Letter

  
  

• Research Statement - Please discuss research accomplishments and proposed plans. This can include, for example, your publication record, awards, presentations, inclusive research practices that promote the excellence of your research, and areas for future research.
  
  (Optional)

  
  

• 3-5 required (contact information only)

Help contact:

UC Berkeley is committed to diversity, equity, inclusion, and belonging in our public mission of research, teaching, and service, consistent with UC Regents Policy 4400 and University of California Academic Personnel policy (APM 210 1-d). These values are embedded in our Principles of Community, which reflect our passion for critical inquiry, debate, discovery and innovation, and our deep commitment to contributing to a better world. Every member of the UC Berkeley community has a role in sustaining a safe, caring and humane environment in which these values can thrive.

The University of California, Berkeley is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or protected veteran status.

For more information, please refer to the University of California's Affirmative Action and Nondiscrimination in Employment Policy and the University of California's Anti-Discrimination Policy.

In searches when letters of reference are required all letters will be treated as confidential per University of California policy and California state law. Please refer potential referees, including when letters are provided via a third party (i.e., dossier service or career center), to the UC Berkeley statement of confidentiality prior to submitting their letter.

As a University employee, you will be required to comply with all applicable University policies and/or collective bargaining agreements, as may be amended from time to time. Federal, state, or local government directives may impose additional requirements.

Unless stated otherwise, unambiguously, in the position description, this position does not include sponsorship of a new consular H-1B visa petition that would require payment of the $100,000 supplemental fee.

As a condition of employment, the finalist will be required to disclose if they are subject to any final administrative or judicial decisions within the last seven years determining that they committed any misconduct.

• 
  
• "Misconduct" means any violation of the policies or laws governing conduct at the applicant's previous place of employment, including, but not limited to, violations of policies or laws prohibiting sexual harassment, sexual assault, or other forms of harassment or discrimination, as defined by the employer.
  
• UC Sexual Violence and Sexual Harassment Policy
  
• UC Anti-Discrimination Policy
  
• APM - 035: Affirmative Action and Nondiscrimination in Employment
  

Project Engineer - Fluid Power Hydraulics

We're seeking a skilled Project Engineer with expertise in fluid power hydraulics to join our team. In this role, you'll complete engineering projects by organizing and controlling project elements, with a strong focus on designing fluid power systems from cradle to grave. This includes starting with initial concepts, collaborating with cross-functional teams through development, building, and shipping the final product. Approximately 80% of the work involves hydraulics (pumping oil), with 20% focused on water or lubrication systems. You'll also improve engineering drawings and ensure that all components and systems sent to the shop floor are fully engineered for form, fit, and function.

Objective:

Complete engineering projects by organizing and controlling elements, emphasizing fluid power hydraulics design and system integration.

Essential Functions:

• Assist with preparation of proposals for fluid power systems, as directed by the Project Manager.
• Conduct engineering reviews of jobs, ensuring form, fit, and function of components in fluid power applications.
• Write change orders as required.
• Answer questions for manufacturing personnel during the build process.
• Develop project objectives by reviewing proposals and plans, conferring with management.
• Determine project responsibilities by identifying phases and elements, assigning personnel, and reviewing bids from contractors.
• Determine project specifications by studying product design, customer requirements, and performance standards; complete technical studies and prepare cost estimates.
• Confirm product performance by designing and conducting tests on fluid power systems.
• Determine project schedule by studying plans and specifications, calculating time requirements, and sequencing elements.
• Maintain project schedule by monitoring progress, coordinating activities, and resolving problems.
• Design fluid power systems from concept to completion, including simple circuitry integration.
• Improve engineering drawings and verify that all designs for the shop floor are thoroughly engineered.

Competencies:

• Program/Project Management
• Professional Knowledge in Fluid Power Hydraulics
• Engineering Design/Analysis (with emphasis on fluid power systems)

Required Education & Experience:

• Degree not required but is a plus.
• Knowledge of AutoCAD.
• Prior engineering experience, including hands-on design of fluid power systems.
• Experience designing fluid power hydraulics systems, including simple circuitry.

Preferred Experience:

• SolidWorks