Electronic Components Explained Pdf Jobs in Usa
5,145 positions found — Page 9
About American Meat Companies:
American Meat Companies was founded by Ron and Mariellen Day in a small meat locker in Anaheim, California. From our very modest beginnings in 1975, American Meat Companies has grown to become one of the largest meat purveyors in Southern California and has expanded to a brand new state-of-the-art facility in Dallas, Texas.We produce a full line of steaks, hamburger patties, pork chops, and poultry items, and we make them to your specifications.
We know meat. And it’s all we do. We are passionate about quality and we are extremely proud of the reputation we have earned over the past 46 years.
2nd Shift Industrial Maintenance Tech Job Summary:
Under the supervision of the Facilities & Maintenance Manager, you will be responsible for setting up, installing, repairing, and maintaining production/manufacturing equipment and machinery for a new start-up facility. Inspects equipment for proper functioning and performs preventative maintenance duties per manufacturer's specifications. Diagnosis equipment malfunctions and makes repairs or adjustments as needed. Responsible for assuring all work performed meets Product Safety and Quality, Employee Safety, and Legality of Policies and Procedures.
Essential Duties and Responsibilities:
1. Follow specifications of blueprints, manuals, and schematic drawings; install, maintain and repair
equipment, machinery, physical structures, and plumbing/electrical systems.
2. Inspect, measure, and test equipment while in operation visually (using electrical and electronic equipment) and auditory (listening for unusual sounds from machines or equipment) to detect malfunction, wear, misalignment, or other problems. Inspect used parts to determine changes in dimensional requirements.
3. Discuss/diagnose machine problems with the Maintenance Supervisor, Production Supervisor, Production Superintendent, Plant Manager, or other maintenance workers. Inform appropriate management personnel of equipment and parts needs.
4. Dismantle defective machines and equipment and install new or repaired parts. Reassemble and test machines.
5. Clean and lubricate shaft, bearings, gears, and other parts of machinery.
6. Install and repair electrical apparatus, such as transformers, wiring, and electrical and electronic components of machinery and equipment.
7. Layout, assemble, install and maintain pipe systems and related hydraulic and pneumatic equipment. Repair and replace gauges, valves, pressure regulators, and related equipment.
8. Install, program, and repair automated machinery and equipment, such as robots or programmable controllers.
9. Set up and operate machine tools, such as lathe, grinder, drill, and milling machine, to repair or fabricate machine parts.
Other Duties and Responsibilities:
1. Repair and maintain the physical structure of the establishment and perform preventative maintenance functions.
2. Assist production personnel in change-over and set-up procedures.
3. Attend safety classes/seminars as periodically scheduled.
Decision Making & Problem Solving: Responsible for troubleshooting, diagnosing, and repairing production equipment, including but not limited to industrial blenders, industrial mixers, automated packaging equipment, robotic equipment, pumps, valves, and pressure vessels.
Good Manufacturing Practices: Interprets GMP and HACCP regulations into Company and product-specific practices.
Production Support: Accountable for the efficient installation, maintenance, and repair of Electrical Controls and Mechanical machinery. Equipment includes but is not limited to Hydraulics Combo Dumpers, Meat Blenders, Grinders, Freezers, Scales, Labelers, Case Sealer, Baggers, Seasoning equipment, etc.
Project Management: Engages in cross-functional activities and collaborates across boundaries to ensure successful project implementation. Gathers information to interpret needs, assess requirements, and take the initiative to identify sound solutions through the application of expertise and knowledge. Must have a very strong customer service orientation with a high sense of urgency.
Quality System Compliance: Ensures the requirements of the Quality System, the Quality System Regulation (USDA, FDA), and other relevant standards are fulfilled.
Safety: Enforces Company safety policies and procedures. Responsible for the safe operation and performance of Maintenance and Facility.
Technical Documentation/Communication/Processes: Knowledge of preventive maintenance procedures / Total Productive Maintenance. Prior experience in Computerized Maintenance Management Systems.
Training & Development: Complete training and documentation thereof, in line with Company policies and procedures.
Other Compliance: Works to ensure compliance with all applicable laws and regulations issued by OSHA, EPA, Labor & Employment Law, and other federal, state, and local regulations, including Lock-out/Tag-out, confined spaces, and personal protection regulations.
Job Requirements (Education, Work Experience, Certifications, Skills)
Education: High school or equivalent (Required), Technical Degree (Preferred), technical training, or equivalent years' experience acceptable in place of formal education. Must be computer literate with proficiency in using CMMS systems.
Work Experience: Minimum five (5) years of industrial maintenance experience in manufacturing (Food Preferred); strong in precision maintenance, electro-mechanical troubleshooting, and other industrial skills to include pneumatic and hydraulic system knowledge with; experience with mechanical systems (e.g., gear boxes, chains, sprockets, motors, seals, bearings), product manuals (e.g., reading and applying knowledge to make repairs), troubleshooting mechanical breakdowns (pinpointing and fixing breakdowns), and reading mechanical drawings (e.g., hydraulics, pneumatics); Experience with electrical systems to include low voltage control circuits, motor circuit controls, VFD s, PLC troubleshooting knowledge (Rockwell PLC/HMI knowledge), and electrical safety systems required.
Certifications: OSHA 40 (Preferred)
Skills:
Ability to communicate effectively with a variety of individuals.
Ability to work in a fast-paced environment.
Ability to reason, negotiate, instruct, persuade, or speak with others.
Ability to pay close attention to detail.
Strong interpersonal skills and judgment in communicating with staff.
Receptive to management development suggestions and willing to seek additional knowledge to facilitate job growth.
Excellent written and oral communication skills.
Proven ability to juggle multiple tasks simultaneously.
Ability to interpret HR regulations, safety rules, operating and maintenance instructions, and procedures manuals.
Ability to solve complex problems.
Fully competent to a high degree in mechanical knowledge.
Ability to troubleshoot electrical controls.
Ability to follow verbal and written instructions, as well as interpret pencil sketches and diagrams.
Ability to read ladder logic and use it to troubleshoot systems.
Other Duties and Responsibilities:
May be required to work overtime, evenings, or weekends to complete work. May be required to work flexible shifts, including on-call.
Other duties and tasks as assigned.
Job Type: Full-time
Benefits:
- 401(k)
- 401(k) matching
- Dental insurance
- Health insurance
- Life insurance
- Paid time off
- Vision insurance
Schedule:
- 2nd Shift
- Holidays
- Possible Overtime
- Weekends as needed
Work Location: In person
Job Description:
Position Details:- $30.00-$35.00 per hour, depending on experience.
- Sunday - Thursday 3rd shift hours starting around 6:00 pm: Flexible on starting time
- Benefits Day 1 of Employment. Free Uniforms and Safety Boots
- Competitive pay and benefits, including Day 1 Health & Wellness Benefits, Employee Stock Purchase Plan, 401K Employer Matching, Education Assistance, Paid Time Off, and much more
- Growth opportunities performing essential work to support America’s food distribution system
- Safe and inclusive working environment, including culture of rewards, recognition, and respect
Perform preventative maintenance of medium to heavy-duty trucks, trailers, reefer units, converter dolly under minimal supervision. Ensure compliance with all State and Federal trucking regulations. Communicates and interacts with co-workers professionally ensuring questions are answered accurately and in a timely manner. Technicians are responsible for the documentation, completion, and to keep current on Work Orders for all repairs and parts used daily. The position will be required to perform road call services as needed.
Primary Responsibilities:
- Complete and perform preventative maintenance on minor repairs and standard component inspections/ repairs of fleet diesel equipment (tractors, trailers, refrigeration units) as well as identifying root causes of basic failures/conditions and perform repairs as required.
- Ensure equipment has required licensing and registration prior to being deemed as “roadworthy”.
- Complete thorough documentation for work orders of repairs and preventative maintenance through the online Enterprise Asset Management system.
- Install, replace, and repair onboard computers.
- Inspect brake systems, steering mechanisms, wheel bearings, and other important parts to ensure that they are in proper operating condition which may require replacement of parts.
- Perform routine maintenance such as changing oil, checking batteries and lubricating equipment and machinery requiring the use of hand tools such as screwdrivers, pliers, wrenches, pressure gauges, and precision instruments, as well as power tools such as pneumatic wrenches, welding equipment, and jacks and hoists.
- Performs other related duties as assigned.
Qualifications:
Required Education: High School Diploma/GED or Equivalent ExperienceRequired Experience: 2+ years of proven medium to heavy-duty vehicle repair including PM's, tire & wheel, air & air disc brakes, diagnosis, computerized diagnostics, electrical troubleshooting, electronic component repair and experience in A/C refrigeration
Company description
Performance Foodservice, PFG’s broadline distributor, maintains a unique relationship with a variety of local customers, including independent restaurants and hotels, healthcare facilities, schools, and quick-service eateries. A team of sales reps, chefs, consultants, and other experts builds close relationships with customers — providing advice on improving operations, menu development, product selection, and operational strategies. The Performance team delivers delicious food but also goes above and beyond to help independent restaurant owners achieve their dreams.
Awards and Accolades
Performance Food Group and/or its subsidiaries (individually or collectively, the "Company") provides equal employment opportunity (EEO) to all applicants and employees, regardless of race, color, national origin, sex, marital status, pregnancy, sexual orientation, gender identity, religion, age, disability, genetic information, veteran status, and any other characteristic protected by applicable local, state and federal laws and regulations. Please click on the following links to review: (1) our EEO Policy; (2) the "EEO is the Law" poster and supplement; and (3) the Pay Transparency Policy Statement.Job Responsibilities:
- Use soldering irons to attach electronic components with SMT and Thru hole technologies.
- Interpreting job routers, written instructions, wiring diagrams and schematic drawings for assembly of electronics
- Performing a variety of inspections to ensure assemblies meet/exceed IPC standards
- Performing pass downs with outgoing/incoming shifts
- Modifying, soldering, reworking, repairing assemblies and subassemblies according to specifications, drawings, and work instructions
- Other duties as assigned by Lead or Supervisor
Required Qualifications:
- Will require an onsite soldering assessment to J-STD001 standards during the interview
- Must have meticulous hand-eye coordination and manual dexterity
- Must be able to work 2nd Shift hours, 2:30pm to 12:00am
- Typically requires 5+ years of electronics assembly and inspection experience with in-process soldering (both through hole and surface mount)
- Must be able to work for extended hours utilizing a microscope to perform inspection and solder touch-ups
- Hand soldering experience is required
- Knowledge of ESD (Electrostatic discharge) procedures
- High School Diploma or GED
Preferred Qualifications:
- Rework/repair, wire attach, and mechanical assembly
- Must be detail oriented and able to multitask
- IPC-610, J-STD-001 and 7711/7721 certification preferred
- Good written and verbal communication skills
- Must be able to work a flexible schedule in order to meet production and customer needs
- 10 plus years related experience preferred
\"This position requires you to access information that is subject to U.S. export regulations. You may only access such information if you are a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. government.\"
Why should you join Mercury Systems?
Mercury Systems is a technology company that makes the world a safer, more secure place. We push processing power to the tactical edge, making the latest commercial technologies profoundly more accessible for today's most challenging aerospace and defense missions. From silicon to system scale, Mercury enables customers to accelerate innovation and turn data into decision superiority. Headquartered in Andover, Massachusetts, Mercury employs more than 2,300 people in 24 locations worldwide. To learn more, visit
Our Culture
We are committed to making Mercury a great place to work, no matter where our employees are located. We offer a casual and enjoyable atmosphere that allows employees to learn and grow. We help and care for one another and work as one to achieve results for us and for our customers. We value communication and transparency, and strive to foster two-way dialogue at all levels of the organization. We are committed to lifelong learning, offering comprehensive skills training and tuition reimbursement. Whether you're just starting out on your career journey or you are an experienced professional, it's important to us that you feel recognized and rewarded for your contributions.
To find out more about Why Mercury?, or visit the Mercury Community or find answers to general questions at Mercury FAQs
Mercury Systems is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex (including pregnancy), sexual orientation, gender identity, national origin, genetic information, creed, citizenship, disability, protected veteran or marital status.
As an equal opportunity employer, Mercury Systems is committed to a diverse workforce. In order to ensure reasonable accommodation for individuals protected by Section 503 of the Rehabilitation Act of 1973, the Vietnam Veterans' Readjustment Act of 1974, and Title I of the Americans with Disabilities Act of 1990, applicants that require accommodation in the job application process may contact the number below for assistance
(978) 256-1300
Click here read about our recent press release.
Job Responsibilities:
- Use soldering irons to attach electronic components with SMT and Thru hole technologies.
- Interpreting job routers, written instructions, wiring diagrams and schematic drawings for assembly of electronics
- Performing a variety of inspections to ensure assemblies meet/exceed IPC standards
- Performing pass downs with outgoing/incoming shifts
- Modifying, soldering, reworking, repairing assemblies and subassemblies according to specifications, drawings, and work instructions
- Other duties as assigned by Lead or Supervisor
Required Qualifications:
- Will require an onsite soldering assessment to J-STD-001 standards during the interview
- Must have meticulous hand-eye coordination and manual dexterity
- Must be able to work 2nd Shift hours, 2:30pm to 12:00am
- Typically requires 5+ years of electronics assembly and inspection experience with in-process soldering (both through hole and surface mount)
- Must be able to work for extended hours utilizing a microscope to perform inspection and solder touch-ups
- Hand soldering experience is required
- Knowledge of ESD (Electrostatic discharge) procedures
- High School Diploma or GED
Preferred Qualifications:
- Rework/repair, wire attach, and mechanical assembly
- Must be detail oriented and able to multitask
- IPC-610, J-STD-001 and 7711/7721 certification preferred
- Good written and verbal communication skills
- Must be able to work a flexible schedule in order to meet production and customer needs
- 10 plus years related experience preferred
\"This position requires you to access information that is subject to U.S. export regulations. You may only access such information if you are a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. government.\"
Why should you join Mercury Systems?
Mercury Systems is a technology company that makes the world a safer, more secure place. We push processing power to the tactical edge, making the latest commercial technologies profoundly more accessible for today's most challenging aerospace and defense missions. From silicon to system scale, Mercury enables customers to accelerate innovation and turn data into decision superiority. Headquartered in Andover, Massachusetts, Mercury employs more than 2,300 people in 24 locations worldwide. To learn more, visit
Our Culture
We are committed to making Mercury a great place to work, no matter where our employees are located. We offer a casual and enjoyable atmosphere that allows employees to learn and grow. We help and care for one another and work as one to achieve results for us and for our customers. We value communication and transparency, and strive to foster two-way dialogue at all levels of the organization. We are committed to lifelong learning, offering comprehensive skills training and tuition reimbursement. Whether you're just starting out on your career journey or you are an experienced professional, it's important to us that you feel recognized and rewarded for your contributions.
To find out more about Why Mercury?, or visit the Mercury Community or find answers to general questions at Mercury FAQs
Mercury Systems is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex (including pregnancy), sexual orientation, gender identity, national origin, genetic information, creed, citizenship, disability, protected veteran or marital status.
As an equal opportunity employer, Mercury Systems is committed to a diverse workforce. In order to ensure reasonable accommodation for individuals protected by Section 503 of the Rehabilitation Act of 1973, the Vietnam Veterans' Readjustment Act of 1974, and Title I of the Americans with Disabilities Act of 1990, applicants that require accommodation in the job application process may contact the number below for assistance.
(978) 256-1300
Click here read about our recent press release.
Job Title: Manufacturing Technician (Onsite role)
Location: Medina, NY 14103
Duration: 12-24 months contract
Timing: 05:30AM to 04:00 PM (Monday to Thursday) and Mandatory OT on Fridays occasionally
Pay rate: $22.65/- hourly on W2 with 5 PTO.
Job Description:
- An environment that is temperature and humidity controlled.
Essential Functions:
- Follows procedures and performs the various steps contained within the procedure in order to return the pump to its original state and to assure a quality end product.
- Troubleshooting various components of the pump.
- Able to work with various hand tools
- Perform limited technical aspects of the repair, production and/or restock process
- Complete all documentation needed for quality compliance
Qualifications:
- Must be able to identify small electronic components and be able to differentiate using their markings.
- Ability to handle often stressful production demands, demonstrates teamwork and cooperation.
- Read and follow written work instructions with deviation. Manipulate small piece parts with both hands and assemble or disassemble a medical device using small hand tools.
- Perform assigned tasks with minimal supervision, including required documentation needed for compliance.
- Good Judgment, positive attitude and a high level of initiative
- Willingness and ability to learn production/repair assembly procedures and drawings.
- Basic computer skills
- Ability to work in fast-paced work environment to meet daily targets
- Ability to manually perform basic mathematical calculations
- Ability to transcribe data accurately
- Ability to read and write English proficiently
- Ability to visually inspect and identify particulate/foreign matter and distinguish between colors as required by FDA Current Good Manufacturing Practices
Education/Experience:
- High School diploma or GED
- Preferred experience in mechanical or electrical repair in a Manufacturing setting
Physical Demands:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee:
- Must be able to sit or stand for most of the workday.
- Must have good hand to eye coordination and dexterity
- Physical Requirements: Dynamic Lifting capability: Must have the ability to lift and carry 15 pounds from floor to shoulder and lift 2 pounds from shoulder to overhead. Must also have the capability to push and pull a maximum force of 6 pounds.
Best regards,
Rachit Rastogi (Rick)
Senior Talent Acquisition Specilaist
LinkedIn: /in/rachit-rastogi-a6497827
Email:
An Associate Product Line Manager (PLM) is responsible for engaging with PLM's for the success of our principals’ product line, from development to sales in an electronic components industry. PLM's work to increase profitability and market share by analyzing the market, competitors, and customers, and then help the sales team develop strategies to achieve their goals.
Associate role to include involvement in, but are not limited to:
- Enter/Update New Business Opportunities in Dynamics 365 (CRM) and the principal’s system in a timely manner that mirror each other
- Research to identify opportunities for growth and anticipate trends
- Work internally and with the principals to design and develop marketing and sales strategies to drive growth
- Action/Follow-up on leads from our principals
- Be an advocate for the product lines and promote new product offerings and solutions to the team
- Consistent review of up trending/down trending accounts to determine how best to recapture business or further engage on new or up trending accounts
- Fully knowledgeable of escalation paths within the principals to elevate issues as necessary
- On-time reporting to the principals per their scheduled requests for updates
- Understanding of the principal’s supplier portal and working knowledge to utilize the available resources
- Final review of monthly reports prior to sending to the Regional Sales Managers
- Review and submit split reports timely and accurately to capture Won business moving outside of the territory
- Weekly POS review to identify trends and emerging accounts to review with the sales team
- Quote follow up on all opportunities of significant value with the Field Sales Engineers (FSE) and distributor partners
- Monitor the performance of the line and identify new and lost business and a strategy to protect and grow
- Responsible for planning and documenting the travel and customer visit schedule of principals when in the territory
We are seeking applicants with an energetic, aggressive personality, strong work ethic, and excellent communication skills. MUST be computer literate and able to handle multiple tasks to support the sales team.
The Buyer/Planner coordinates activities involved with planning and procuring goods and services for multiple product lines. They are responsible for planning and purchasing items such as electromechanical assemblies, fabricated parts, and electronics. They understand different manufacturing processes and have a willingness to travel both domestically and internationally. Work closely with Engineering, Accounting, Scheduling, Receiving and Production personnel to ensure timely delivery of materials while following appropriate policies and procedures. This is a hybrid role requiring at least three days in our office in Eagleville, PA.
Essential Duties and Responsibilities:
- Issue requests for quotes (RFQ) and select the best source consistent with cost, quality and delivery requirements. Negotiate and manage long-term pricing agreements on critical commodities.
- Complete purchase requests with domestic and international suppliers by inputting purchase orders, expediting deliveries, and verifying all transactions.
- Handle correspondence concerning over-shipments, delivery shortages, changes in quantity, delivery dates, and prices and report such changes to the interested parties in a timely manner as required.
- Act as a liaison between suppliers and involved departments to resolve procurement-related problems.
- Source new products to meet new product launch timelines.
- Authorize payment for purchases by reviewing invoices and related documentation.
- Maintain appropriate inventory levels consistent with inventory goals and as set by management.
- Maintain accuracy of system information, including lead-time, pricing, current supplier information, current purchase order data, etc.
- Monitor supplier performance by ensuring that product is delivered as scheduled and meets specifications; maintaining appropriate files and records of meetings with suppliers to ensure company requirements are met and that the supplier is aware of their performance.
- Contribute to team effort by accomplishing other job-related tasks as needed, enabling other workers to achieve their job objectives.
- Source new suppliers as required and determine the best source of supply by evaluating price, quality, manufacturing capabilities, lead time, service support, and financial stability.
- Participates effectively as a member of a team promoting the exchange of ideas, information, and feedback in all directions.
- May work directly in support of line operations and in collaboration with department managers, engineers, or operations staff.
- Demonstrate leadership and expertise in Lean Manufacturing.
Knowledge, Skills, Experience and Education requirements:
- Professional purchasing in manufacturing or related industry.
- Bachelor’s degree (BS/BA) and 5 years’ experience.
- Must understand an MRP software system.
- Knowledge of the electronic component industry.
- Working knowledge of Excel, Word, and PowerPoint.
- Experience in negotiation.
- Ability to perform in a fast-paced, deadline-oriented work environment.
- Ability to work well with others in a team environment.
- Excellent organizational, written, and verbal communication skills.
- Preferred to have experience with international travel.
**This is a hybrid role - qualified candidates must be available to come in to our office in Eagleville, PA at least three days per week.
L3Harris' Advanced Effects (AE), provides precision electronic components, subsystems, and systems for the DOD and international allies.
L3Harris' AE specializes in the design and manufacture of fuses, ignition safety devices, proximity sensors, GPS navigation systems, aerospace status indicators, and range and test solutions. The L3Harris Interstate Electronics Corporation business was founded in 1956 and for over 65 years IEC has played a key role in the most successful defense system of modern history. With sites in Yorba Linda, CA, Cape Canaveral, FL, and Crystal City, VA, IEC is a recognized industry leader in defense and security solutions, providing critical technology advancements in the areas of GPS/Position Navigation and Timing, and Range and Test Solutions. We offer competitive benefits, an alternative 4/10 work schedule, and the opportunity to work with a talented and diverse group of professionals. Job Description:
The Senior Manager FP&A and Operational Finance will be responsible for all aspects of FP&A and Operational Finance and will lead a team of 3-4 program finance analysts.
The Senior Finance Manager will be responsible for development and distribution of financial reports to stakeholders. The Senior Finance Manager must understand the requirements of both their internal and external customers and provide useful, timely data to assist in the reporting and decision-making process.
The Senior Manager will lead preparation of monthly forecasts outlooks for Orders, Sales, EBIT, Cash and Working Capital.
This role requires quick and detailed thinking as well as a willingness to teach and grow.We are seeking a proactive, self-starter with the ability to work effectively in a team environment.
Must possess excellent communication and interpersonal skills to be able to collaborate with key functional stakeholders. Ideal candidate must be detail oriented with good organizational skills and capable of multi-tasking and the ability to work with minimal day-to-day supervision. Successful candidates will demonstrate an aptitude for efficiency, problem-solving, and resourcefulness, with a commitment to quality while developing their leadership skills as a key business partner. This role will partner with the IEC Finance Lead to ensure forecasting accuracy and solid finance/accounting rigor are applied across the IEC portfolio of programs. Essential Functions: Prepare financial summary for and ensure financials for Monthly Business Review, Monthly Financial Review (MFR), Management Rate Review (MRR) Annual Operating Plan (AOP), Joint Strategic Plan (JSP), and any other financial reviews are accurate and complete.Support month end and week soft closing activities including validating actuals, revenue recognition, cost and fee ceilings, and profit bookings.Analyze Estimate at Completion (EAC) and for impact to financials.Analyze Strategic Growth Plan (SGP) program forecasts and ensure business area outlook aligns with the long-term growth strategy.Analyze Contract Terms and Conditions for impact to revenue recognition and ability to execute within financial processes.Monitor overhead budgets and analyze labor utilization.Prepare monthly forecasts outlooks for Orders, Sales, EBIT, Cash, Working Capital and Discretionary Spending.Participate in customer meetings as required.Lead special projects as required.Responsible for consolidating and analyzing program forecasts to develop the short-term forecast (STF).Prepare meaningful variance analysis of actual versus forecast financial performance and trend analysis.Load and maintain programmatic forecast utilizing FCSTGov or similar tools.Lead the development, maintenance, and analysis of labor, material, department expense, and burden rates.Perform rate modeling and rate variance analysis.Assist government compliance with incurred cost submission.Manage Pools in CostPointFlexibility to work in a fast-paced dynamic organizationFrequently responsible for managing large, complex project initiatives of strategic importance to the organization, involving large cross-functional teamsSupports significant improvements of processes, systems, solutions, or products to enhance performance of job area. May develop new concepts or standardsInterfaces with Program Managers, Accounting, Functional Leads, and customers as the primary source of all financial information for the portfolio they supportInterfaces with internal and external auditors in support of revenue recognition, accounting, EVMS, rate and other operational audits.Experience with contracts such as CPAF, CPIF, CPFF, T&M, FFP, etc.Serve as a hands-on manager who actively participates in day-to-day work, stepping in to execute tasks alongside the teamEffective interpersonal and communication skills and ability to work independently with minimal supervision.Responsible for knowing/following L3Harris policies and procedures.Ability to obtain a US Secret Security clearance.
Qualifications:
Bachelor’s degree in accounting or finance and 12 years of related experience. Graduate Degree and a minimum of 10 years of related experience.
In lieu of a degree, minimum of 16 years of prior related experience.10+ years of experience in Finance6+ years of experience DoD programs (all services and agencies) and International programs (DCS and FMS) and Federal Acquisition Regulations (FAR)4+ years’ experience with FP&A financial analysis, forecasting and reporting including variance explanations Preferred Additional Skills: Demonstrated strong working knowledge of and Microsoft Office applications specifically Excel and PowerPoint.Advanced proficiency with MS Office (Word, Excel, PowerPoint, and Outlook), especially with Excel.Demonstrated Process improvement mindsetExposure to Hyperion/HFM desiredExperience with Integrated Baseline Reviews and EVMS Surveillance ReviewsExperience with PropricerObjective thinker, problem solver with ability to execute challenging tasks to completionAbility to influence cooperation and develop relationships with various people in different functional areasKnowledge of Federal Acquisition Regulations (FAR), Cost Accounting Standards (CAS), and Generally Accepted Accounting Principles (GAAP).Knowledge of cost/schedule development, budgeting, financial analysis and reporting, financial modeling, corporate forecasting, and/or business acquisitions.Experience with Deltek Cobra, Empower, Deltek CostPoint (ERP) Hyperion/Smartview, Oracle, and FCSTGov.
In compliance with pay transparency requirements, the salary range for this role is $126,000.00 MIN - $234,000.00 MAX. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
Seeking a Buyer responsible for sourcing parts, equipment, and materials by developing supplier relationships and monitoring supplier performance; obtaining required items, verifying receipt, authorizing payment, and managing inventory.
Key Responsibilities
- Process domestic and international purchase orders, expedite deliveries, and verify all transactions.
- Handle correspondence related to shipment discrepancies, delivery shortages, quantity changes, delivery dates, and pricing; report changes to relevant parties in a timely manner.
- Collaborate with the Purchasing Manager on RFQ/RFP issuance.
- Serve as liaison between suppliers and internal departments to resolve procurement-related issues.
- Process non-conforming material and RMA requests with supply chain partners.
- Maintain inventory levels consistent with management-defined targets and goals.
- Ensure accuracy of commodity code data within the ERP system, including lead times, pricing, supplier information, and purchase order data.
- Monitor and maintain ERP inventory parameters (minimum, maximum, safety stock levels) and recommend adjustments as needed.
- Track supplier performance against delivery schedules and specifications; maintain records of supplier communications and performance.
- Support team objectives by completing additional job-related tasks as needed.
- Apply strong problem-solving and analytical skills to make timely, effective decisions.
Knowledge, Skills & Abilities
- CPM or APICS certification desirable.
- 5+ years of procurement experience including purchasing, inventory control, and supplier relationship management.
- Knowledge of MRP processes; ERP system experience a plus.
- Contract manufacturing experience beneficial.
- Knowledge of import freight and logistics.
- Strong experience procuring electronic components, reading technical specifications, and collaborating with Engineering, Quality, and Production teams.
- High attention to detail.
- ERP system experience (e.g., Epicor or equivalent).
- Manufacturing background.
Position: Business Administrator
Role: Full Time in Person
Location: 1800 N American St, Philadelphia, PA
Compensation: $50k-70k per year, 15 days PTO, shares in equity plan and benefits
About US
FlashPCB is a US-based rapid PCB prototyping service. We are using AI and smart software to eliminate the traditional setup time and costs in the PCB manufacturing process. We give our customers the power to create, innovate, and experiment with their PCBA designs. We provide instant checkout of assembled PCBs with very short lead time.
What You’ll Do
The business administrator will possess strong organizational skills and a passion for providing exceptional support in a fast-paced environment. The role includes managing vendor communications via email and phone, printing packing slips and shipping labels using our logistics software, organizing production files and electronic components for assembly, processing invoices and payments, and providing administrative support to the executive team, including scheduling, correspondence, and document preparation.
Responsibilities:
- Communicate with vendors
- Prep and organize documents
- Create purchase orders
- Bill Customers
- Pay Invoices
- Manage Calanders
Qualifications Skills and Experience:
- Strong organizational skills with attention to detail.
- Proven work ethic with a get the job done mentality
- Computer literacy skills with proficiency in Microsoft Office Suite (Word, Excel, PowerPoint), Google GSuite (Gmail, Docs, Slides, Sheets) and QuickBooks.
- Ability to communicate effectively both verbally and in writing.
- A proactive attitude with strong problem-solving abilities is essential for success in this role.
- Ability to indipendantly manage projects
Why Join Us
At FlashPCB, you’ll be part of a small, fast-growing business with a flat structure where your voice matters and your work directly shapes our future. We’re transforming the PCB assembly industry, and every team member plays a key role in that mission. Our hands-on, collaborative environment offers the chance to expand your skills, take on new challenges, and grow alongside the company.
