Electronic Components Explained Jobs in Usa
4,919 positions found — Page 8
C
Electronics Assembler - Molding
✦ New
Salary not disclosed
Position Summary: This position is responsible for the assembly of electronic components including hand soldering, basic assembly using hand tools, labeling, and packaging. The position requires visual inspection and, at times, functional testing to ensure quality workmanship, use of product drawings and work instructions, and accurate record keeping within our computer software program.
*Level I - Entry Level, Completed Curbell training and demonstrate the ability to apply training to technical tasks. Previous soldering experience preferred. Computer experience.
*Opportunity to advance into Level II and Level III.
Essential Functions:
Core Competencies
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
*Level I - Entry Level, Completed Curbell training and demonstrate the ability to apply training to technical tasks. Previous soldering experience preferred. Computer experience.
*Opportunity to advance into Level II and Level III.
Essential Functions:
- Proficiently use detailed drawings to perform product-processing functions such as assembly, soldering and labeling, following IPC standards and techniques and accurately verifying BOL's in job packets. Meet or exceed individual rework goals that are set based on yearly team averages
- Understands daily outputs with a goal of performing at or above average minutes per piece of Team
- Understand and follow the organizations Quality Management System. Keeps work area organized following 5-s work standards diligently. Participate with all sustainability efforts including waste reduction and recycling.
- Work productively and cooperatively in a team environment. Maintain strong lines of communication with your supervisor and all team members to collectively work towards team goals. Be proficient in all areas within your responsibility and offer and promote changes for improvement.
- Perform production order confirmations accurately recording Yield, Labor, Reworks and Final confirmations. Total number of individual errors must not exceed the yearly team average. Keep your Supervisor aware of any needed changes and or reasons for missing standard. Participate with any additional reporting methods used to assist the groups in the production process.
- Performs other duties as assigned
Core Competencies
- Multi-Tasking
- Sense of Urgency & Work Ethic
- Approachability & Perceptiveness
- Adaptability & Flexibility
- Setting Priorities & Time Management
- Relationships, Influence & Problem Resolution
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
Not Specified
Senior Specialist, Program Finance
✦ New
Salary not disclosed
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.
L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Job Title: Senior Specialist, Program Finance
Job Number: 34279
Job Location: Yorba Linda, CA
Schedule: 4/10: Employees work 10 hour days, 4 days a week
L3Harris' Advanced Effects (AE), provides precision electronic components, subsystems, and systems for the DOD and international allies. L3Harris' AE specializes in the design and manufacture of fuses, ignition safety devices, proximity sensors, GPS navigation systems, aerospace status indicators, and range and test solutions.
The L3Harris Interstate Electronics Corporation business was founded in 1956 and for over 65 years IEC has played a key role in the most successful defense system of modern history. With sites in Yorba Linda, CA, Cape Canaveral, FL, and Crystal City, VA, IEC is a recognized industry leader in defense and security solutions, providing critical technology advancements in the areas of GPS/Position Navigation and Timing, and Range and Test Solutions. We offer competitive benefits, an alternative 4/10 work schedule, and the opportunity to work with a talented and diverse group of professionals.
Job Description:
The Senior Specialist, Program Financial Analyst will support the project team members in the planning, tracking, analysis, and reporting of projects of varying contract type, size and complexity. The analyst will assist in generating monthly Integrated Program Management Reports (IPMR and/or IPMDAR), Quarterly Estimate at Completions (EACs), Earned Value Management and preparation of monthly forecasts outlooks for Orders, Sales, EBIT, Cash and Working Capital.
We are seeking a proactive, self-starter with the ability to work effectively in a team environment. Must possess excellent communication and interpersonal skills to be able to collaborate with key functional stakeholders. Ideal candidate must be detail oriented with good organizational skills and capable of multi-tasking and the ability to work with minimal day-to-day supervision.
Essential Functions:
- Responsible for Earned Value Management, baseline planning/execution, and estimate to complete changes
- Monitor weekly, monthly, and quarterly cost forecasts against actuals
- Perform variance analysis and support internal / external reporting requirements.
- Interface with cross-functional departments to support assigned projects and ad hoc business area requests.
- Support Integrated Baseline Reviews and close out of action items
- Support internal/external EVMS Surveillance Audits
- Detail oriented with ability to multi-task and prioritize competing demands in a fast-paced environment.
- Experience with contracts such as CPAF, CPIF, CPFF, T&M, FFP, etc.
- Makes moderate to substantial improvements to systems and processes.
- Provide guidance, coaching and training to other employees.
- Ability to work independently with minimal supervision.
- Responsible for knowing/following L3Harris policies and procedures.
Qualifications:
- Requires Bachelor's Degree and minimum 6 years of prior relevant experience. Graduate Degree and a minimum of 4 years of prior related experience. In lieu of a degree, minimum of 10 years of prior related experience.
Preferred Additional Skills:
- Experience with Deltek Cobra, Deltek Costpoint, Empower and Cognos
- Advanced Excel Skills (Macro's, Arrays, SUMIF's formulas
- Demonstrated strong working knowledge of EVMS Tools such as Cobra, Empower or wInsight and Microsoft Office applications specifically Excel and PowerPoint
- Experience with EVMS reporting including Monthly EV Processing, generating CDRLs and supporting IBRs and Surveillance reviews with DCMA Audits
In compliance with pay transparency requirements, the salary range for this role is $88,000.00 MIN - $164,000.00 MAX. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.
L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
Not Specified
S
On-Road Field Diesel Mechanic
Salary not disclosed
On-Road Field Diesel Mechanic
SNI has an immediate need for an On-Road Field Diesel Mechanic to join a well-established and successful residential and commercial site developer!
The successful On-Road Field Diesel Mechanic will have experience maintaining, repairing, and troubleshooting heavy diesel-powered equipment at various job sites throughout the Baltimore, Maryland area.
You will be provided with a company truck and will be tasked with working on heavy equipment and diesel engine mechanics, excellent troubleshooting skills, and the ability to work independently in a field environment.
RESPONSIBILITES:
- Perform on-site maintenance and repairs of heavy diesel-powered equipment, including excavators, bulldozers, loaders, and other construction machinery.
- Travel to various job sites to diagnose and resolve mechanical and diesel engine issues.
- Conduct routine maintenance services, including oil changes, filter replacements, and inspections of diesel engines and associated systems.
- Troubleshoot and repair hydraulic, electrical, and diesel engine systems.
- Maintain accurate records of maintenance and repair activities.
- Drive and maintain the company-provided service truck.
- Perform maintenance and repairs to light trucks as needed.
- Ensure all work is performed safely and efficiently.
QUALIFICATIONS:
- Minimum of 3-5 years of experience in heavy equipment and diesel engine maintenance and repair.
- Strong mechanical and technical skills, with a focus on diesel engines.
- Excellent troubleshooting and diagnostic abilities, especially with diesel systems.
- Familiarity with hydraulic and electrical systems.
- Light truck maintenance and repair experience is preferred.
- Ability to work independently and manage time effectively.
- Valid driver’s license and a clean driving record.
- Post-secondary degree or certification in heavy equipment/diesel mechanics is preferred but not required.
- Experience with diagnostic tools.
- Familiarity with parts and electronic components of complex machinery and engines.
Benefits
- Health Insurance
- Dental and Vision Insurance
- Life Insurance
- Paid Holidays
- Paid Vacation
- Year End Bonus
- 401K/Profit Sharing
- Short Term Disability
- Safety Training
Not Specified
P
Truss Plant Manager
Salary not disclosed
Patriot Truss & Components is looking for an experienced Truss Manager. This role is responsible for helping oversee daily plant operations. This includes managing staff, production goals, quality control, and safety procedures.
Responsibilities
- Monitor quality, safety, and efficiency on the production floor
- Troubleshoot production issues and ensure deadlines are met
- Maintain accurate records of inventory and communicate daily with management
- Foster a culture of accountability, teamwork, and safety
- Able to stand for long periods of time
- Able to lift 50 pounds daily
Requirements
- The minimum work week to consist of Monday-Friday (normal hours 7:00AM-4:00PM)
- Additional hours may be required at times to meet deadlines
- Knowledge of basic building concepts and math calculations
- Be tentative via phone on vacation in case of an emergency
- Attending weekly meetings as needed. If a meeting cannot be made a 24-hour notice will be needed
Benefits
- Medical/Dental/Vision/Life Insurance
- Vacation, Sick, and Personal time
- Paid Holidays
Not Specified
Electrical CAD Project Lead – Data Center Systems (WASHINGTON)
Salary not disclosed
Job Title: Lead Electrical CAD Designer
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
temporary
Lead Electrical CAD Designer – Data Center Infrastructure (REMOTE) - Flexible Remote Work with Occasional Travel (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Lead Electrical CAD Designer
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
temporary
Senior CAD Electrical Designer – Digital Infrastructure (REMOTE) (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Lead Electrical CAD Designer
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
temporary
Lead Electrical CAD Designer – Data Center Infrastructure (REMOTE) (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Lead Electrical CAD Designer
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
temporary
Lead Electrical CAD Designer – Data Center Infrastructure (REMOTE) - Flexible Work Location with Minimal Travel (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Lead Electrical CAD Designer
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
temporary
Remote Principal Electrical Design Specialist – Data Center (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Lead Electrical CAD Designer
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
temporary
jobs by
✓ All jobs loaded