Electro Mechanical Engineering Jobs in Usa

Open date: August 20, 2025

Most recent review date: Thursday, Sep 4, 2025 at 11:59pm (Pacific Time)

Applications received after this date will be reviewed by the search committee if the position has not yet been filled.

Final date: Thursday, Aug 20, 2026 at 11:59pm (Pacific Time)

Applications will continue to be accepted until this date, but those received after the review date will only be considered if the position has not yet been filled.

The Department of Nuclear Engineering at the University of California, Berkeley is generating an applicant pool of qualified temporary instructors to teach regular and Summer Session courses, should an opening arise. In addition to classroom/laboratory teaching and preparation, general duties may include (but are not limited to) managing and mentoring graders and/or graduate student instructors (teaching assistants), holding office hours, assigning grades, advising students, preparing course materials (e.g., syllabus), and maintaining a course website.

We are also seeking applicants for hourly Teacher Special Programs (TSP), should an opening arise. The TSP instructor's principal responsibility will be overseeing capstone projects in the Master of Engineering (MEng) program of the Nuclear Engineering Department. This will include the following tasks: Designing and proposing capstone projects. Helping match students into suitable projects. Meeting with each capstone project team on a regular basis to review results, manage interpersonal aspects, and maintain efficient progress. Provide critical, constructive feedback on students' written reports and oral presentations. Coordinating and participating in the MS Plan II exam of each student at the end of the capstone project period.

Department:

Master's degree or equivalent international degree at the time of application.

For Lecturers: Five years of experience in industry or a

research institute, or a Ph.D. or equivalent international degree by the start of the appointment.

For TSPs: Two years of experience in industry or a research

institute, or a Ph.D. or equivalent international degree by the start of the appointment.

Lecturer Positions:

Demonstrated excellence in teaching

Experience teaching college-level courses

A higher-level degree and/or prior teaching experience is preferred in one of the following specializations.

Specializations include, but are not limited to:

Nuclear Engineering

Nuclear Physics, Nuclear Reactions, Nuclear Detection

Radioactive Waste Management

Nuclear Fuel Cycle

Radiation Biological Effects, Dosimetry, Radiation Protection

Radiation Transport, Reactor Physics

Engineering Thermodynamics

TSP Positions: Mentoring experience in one or more of the related engineering fields/specializations or comparable experience/training.

Nuclear

Mechanical

Chemistry

Physics, etc.

Experience in supervising teams of researchers at the graduate level and experience working in industry and/or a research institute.

• Curriculum Vitae - Your most recently updated C.V.

  
  

• Cover Letter - Please discuss prior teaching experience, teaching approach, and future teaching interests. This can include, for example, specific efforts, accomplishments, and future plans to support the success of all students through inclusive curriculum, classroom environment, and pedagogy.

  
  

• Statement of Teaching - Summary of Teaching experience/philosophy for lecturer positions or Mentoring/teaching statement for TSP positions.

  
  

• 2 required (contact information only)

Help contact:

UC Berkeley is committed to diversity, equity, inclusion, and belonging in our public mission of research, teaching, and service, consistent with UC Regents Policy 4400 and University of California Academic Personnel policy (APM 210 1-d). These values are embedded in our Principles of Community, which reflect our passion for critical inquiry, debate, discovery and innovation, and our deep commitment to contributing to a better world. Every member of the UC Berkeley community has a role in sustaining a safe, caring and humane environment in which these values can thrive.

The University of California, Berkeley is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or protected veteran status.

For more information, please refer to the University of California's Affirmative Action and Nondiscrimination in Employment Policy and the University of California's Anti-Discrimination Policy.

In searches when letters of reference are required all letters will be treated as confidential per University of California policy and California state law. Please refer potential referees, including when letters are provided via a third party (i.e., dossier service or career center), to the UC Berkeley statement of confidentiality prior to submitting their letter.

As a University employee, you will be required to comply with all applicable University policies and/or collective bargaining agreements, as may be amended from time to time. Federal, state, or local government directives may impose additional requirements.

Unless stated otherwise, unambiguously, in the position description, this position does not include sponsorship of a new consular H-1B visa petition that would require payment of the $100,000 supplemental fee.

As a condition of employment, the finalist will be required to disclose if they are subject to any final administrative or judicial decisions within the last seven years determining that they committed any misconduct.

• 
  
• "Misconduct" means any violation of the policies or laws governing conduct at the applicant's previous place of employment, including, but not limited to, violations of policies or laws prohibiting sexual harassment, sexual assault, or other forms of harassment or discrimination, as defined by the employer.
  
• UC Sexual Violence and Sexual Harassment Policy
  
• UC Anti-Discrimination Policy
  
• APM - 035: Affirmative Action and Nondiscrimination in Employment
  

Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers.

About Georgia Tech
Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school.

Georgia Tech's Mission and Values
Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do:
1. Students are our top priority.
2. We strive for excellence.
3. We thrive on diversity.
4. We celebrate collaboration.
5. We champion innovation.
6. We safeguard freedom of inquiry and expression.
7. We nurture the wellbeing of our community.
8. We act ethically.
9. We are responsible stewards.

Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact.

Provide engineering services in support of systems and equipment associated with research efforts within an academic or research unit or laboratory. Specific duties will be determined based on assignment and unit needs. This position will interact on a consistent basis with: unit management and staffThis position typically will advise and counsel: unit management and staffThis position will supervise: NA

• Assist engineers and technicians with mechanical/electrical testing
• Assist engineers and technicians with data analysis and reporting
• Operate testing and machine equipment
• Perform basic laboratory maintenance

Job Duty 1 -
Participate in the design, installation and testing of systems and components.

Job Duty 2 -
Develop engineering project schedules, plans, and specifications for systems and components.

Job Duty 3 -
Conduct analyses of system performance; prescribe corrective action where required.

Job Duty 4 -
Troubleshoot systems; may involve calibration and repair work.

Job Duty 5 -
Prepare drawings, schematic diagrams and other documentation associated with components and systems.

Job Duty 6 -
Provide input to and administer project engineering budgets.

Job Duty 7 -
Interact with vendors regarding procurement and delivery issues.

Job Duty 8 -
Participate in project reviews for conformance to quality standards and compliance with applicable codes and regulations.

Job Duty 9 -
Perform other duties as assigned

Educational Requirements
Bachelor's Degree in Engineering field, or equivalent combination of education and experience

Other Required Qualifications
Valid Driver's license This is a temporary position, limited to 1300 hours or 12 consecutive months, and subject to ACA and GT guidelines for temporary employment.

Required Experience
Up to two years of job related experience

Additional Preferred Qualifications
Professional Engineer (PE)

Demonstrated hands-on experience through internships or similar experiences

SKILLS
This job requires application of engineering principles, processes and practices; application of regulations, codes and safety practices; utilization of basic and advanced computer applications including those specific to areas of responsibility; communication skills.

The University System of Georgia is comprised of our 26 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at policymanual/section8/C224/#p8.2.18_personnel_conduct.

Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at policymanual/section6/C2653.

The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The Institute is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and Institute policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities.

Equal opportunity and decisions based on merit are fundamental values of the University System of Georgia (USG) and Georgia Tech. Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of an individuals race, ethnicity, ancestry, color, religion, sex (including pregnancy), national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract.

This is not a supervisory position.
This position does not have any financial responsibilities.
This position will be required to drive.
This role is not considered a position of trust.
This position does not require a purchasing card (P-Card).
This position will not travel
This position does not require security clearance.

Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.

We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.Boeing Commercial Airplanes (BCA) has an exciting opportunity for a Senior Engineering Manager, Avionics Safety Team to lead the System Safety Team on commercial programs.

This role reports to the office of the Integrated Modular Avionics Chief Engineer and is the focal for all safety related activities.

This position is set to join the team in Everett, WA .Position Overview:This role will be responsible for leading the system safety efforts for Avionics systems throughout the lifecycle of the program, ensuring compliance with safety standards, integration of safety designs and analysis throughout the Avionics platform, and promoting a culture of safety within the organization.

The successful candidate will provide mentoring and coaching to all levels of engineers providing knowledge transfer to aid in growing our next generation of leaders and engineers.

Management responsibilities include managing resources for the daily engineering assignments.Primary responsibilities:Lead, embody, and foster the safety culture throughout the Avionics functions and product designs.Collaborate with Avionics functional teams to oversee and maintain the safety analysis activities consistent with applicable industry standards (e.g.

ARP4754, ARP4761)Develop, implement, and maintain an Avionics System Safety Program Plan in alignment with BCA Program and industry standards.Collaborate with cross-functional teams, including engineering, operations, and quality assurance, to ensure safety considerations are integrated and embedded into all phases of the Avionics product lifecycle.Foster a culture of transparency, collaboration, and inclusion within the team.Establish strong relationships with program customers, Avionics functional leaders and external stakeholdersSupport the development of Safety critical Avionics systems throughout the product lifecycle.Stay current with industry trends, best practices, and regulatory changes related to system safety.Develop and implement an Avionics SMS process and embed within the organizational operating rhythm.Work Authorization:This position is expected to be 100% onsite.

The selected candidate will be required to work onsite at Everett, WA.Basic Qualifications (Required Skills/Experience):Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement.5+ years of experience in BCA engineering.3+ years of experience leading and managing teams as a first line (Level K) engineering manager.

2+ years of experience leading Systems Safety Analysis projects.Preferred Qualifications (Desired Skills/Experience)Proven ability to lead with the Boeing ValuesStrong analytical and problem-solving skills, with a track record of innovative solutions in engineering challenges.Demonstrated ability in team building, coaching, and employee development to enhance team performance and engagement.Excellent oral and written communication skills, with the ability to effectively convey complex technical information to all stakeholders.

Solid technical background with the ability to guide and mentor the team.Conflict of Interest:Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation:This is not a union represented position.Pay and Benefits:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Summary Pay Range:$182,000
- $246,000Applications for this position will be accepted until Mar.

21, 2026Export Control Requirements:This position must meet U.

S.

export control compliance requirements.

To meet U.

S.

export control compliance requirements, a "U.

S.

Person" as defined by 22 C.

F.

R.

§120.62 is required.

"U.

S.

Person" includes U.

S.

Citizen, U.

S.

National, lawful permanent resident, refugee, or asylee.Export Control Details:US based job, US Person requiredEducationBachelor's Degree or Equivalent RequiredRelocationThis position offers relocation based on candidate eligibility.Visa SponsorshipEmployer will not sponsor applicants for employment visa status.ShiftThis position is for 1st shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

We're seeking a knowledgeable and detail-oriented Heat Treat Process Engineering Supervisor to lead and support all aspects of the heat treatment operations with a focus on quality, compliance, and continuous improvement.

POSITION SUMMARY:

The Heat Treat Process Engineering Supervisor serves as a technical expert responsible for ensuring the proper thermal processing of materials to meet metallurgical and production requirements meeting all CQI-9 requirements. This role includes overseeing furnace operations, audits, documentation, process control, equipment maintenance, and continuous improvement initiatives.

The ideal candidate will have strong metallurgical knowledge, heat treat process experience, the ability to troubleshoot equipment and process issues, and the ability to manage compliance in a dynamic manufacturing environment. This role has direct supervisory responsibility for Lab Technicians, including scheduling, performance management, training, and ensuring compliance with laboratory testing standards and metallurgical validation requirements.

ESSENTIAL DUTIES (Complete):

• Oversee and manage daily heat treat operations including carburizing, hardening, tempering, and stress relieving
• Ensure compliance with AIAG CQI-9: Heat Treat System Assessment (HTSA) and other applicable standards
• Implement and maintain heat treat process control plans per AIAG guidelines
• Conduct and lead CQI-9 self-assessments, audits, and ensure closure of gaps and non-conformances
• Ensure proper setup, calibration, and operation of furnaces and quench systems
• Monitor thermal cycles and maintain control charts, pyrometry data, and process records per CQI-9
• Support system accuracy tests (SAT), temperature uniformity surveys (TUS), and instrumentation calibration activities
• Ensure all documentation meets internal and customer-specific AIAG compliance requirements
• Collaborate with Engineering, Maintenance, and Quality to address process improvements and problem-solving
• Perform metallurgical inspections including hardness testing and microstructure verification
• Provide technical guidance to operators and maintenance personnel on best practices
• Develop and optimize heat treat process parameters including atmosphere control, quench severity, and thermal cycle design to meet metallurgical and dimensional requirements
• Atmosphere verification (Carbon Potential, Dew Point, etc.)
• Distortion Mitigation Strategy
• Develop, implement, and maintain training programs to ensure team competency on heat treat systems and compliance
• Lead root cause analysis and corrective action efforts for heat treat-related non-conformities
• Utilize Lean Six Sigma principles to drive cost reduction, efficiency, and quality improvements
• Maintain proper traceability and process documentation for internal and external audits
• Provide technical direction for furnace troubleshooting, repair validation, and upgrade initiatives in coordination with Maintenance
• Perform other duties as assigned or required in support of production and quality goals
• Directly supervise Lab Technicians, including daily work assignments and workload balancing
• Approve timecards, PTO, and manage attendance
• Perform other duties as assigned or required in support of production and quality goals

CORE COMPETENCIES:

• Action oriented: Demonstrates ownership in solving process and compliance issues
• Self-Motivated: Demonstrates ability to take initiative and drive to achieve results. Proactively drives conformance with CQI-9 requirements and continuous improvement
• Accountability: Demonstrates ability to take responsibility and maintains sense of ownership and follow through on commitments. Sets high standards of performance.
• Communication: Demonstrates ability to convey and distribute information effectively and encompass strong speaking, presentation, written and listening skills. Ability to create an environment for open communication, and communicates clearly across departments regarding heat treat and compliance status
• Teamwork: Demonstrates ability to work well with others to accomplish common goals and build a positive climate and trusting relationships within teams.
• Leadership: Demonstrates ability to give direction, motivate, manage and reward performance, provide constructive feedback and foster individual professional development. Trains and guides operators to follow standard operating procedures and compliance guidelines
• Reliability: Demonstrates dependability, accountability and trust. Follows processes and meets commitments. Delivers consistent process performance and regulatory documentation
• Decision-making: Demonstrates ability to discover opportunities in challenges, seek profit and sustainable growth, make courageous while sound decisions and demonstrate a good business understanding. Applies analytical skills and CQI-9 knowledge to make data-driven decisions

KNOWLEDGE, SKILLS & ABILITIES:

• Thorough understanding of heat treatment principles, metallurgy, and thermal processing equipment
• Working knowledge of CQI-9 audits, checklists, gap closures, and AIAG documentation practices
• Familiarity with control system troubleshooting, PLCs, HMIs, and data logging
• Ability to supervise, mentor, and train heat treat personnel on compliance, safety, and process controls
• Skilled in conducting microstructure analysis and hardness testing to validate process results
• Strong organizational and record-keeping skills for always maintaining audit-readiness
• Proficiency in Lean Manufacturing, 5S, and Continuous Improvement
• Physically capable of working in a high-temperature, industrial environment
• Commitment to upholding process integrity and product conformance to specification

WORKING ENVIRONMENTAL CONDITIONS:

• Work involves exposure to high-temperature equipment, hot surfaces, and industrial environments. May encounter fumes, noise, and moving machinery. Personal protective equipment (PPE), including heat-resistant gloves, face protection, and hearing protection, is required. Occasional exposure to quenchants, chemicals, and elevated platforms is expected. Safety training and environmental awareness are critical components of the role.

SUPERVISORY RESPONSIBILITY:

• This role has direct supervisory responsibilities.

The demands described here represent those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions.

QUALIFICATIONS:

• Bachelors degree in Mechanical, Materials, Metallurgical, or Manufacturing Engineering required.
• Materials Science or Metallurgical Engineering preferred
• 7+ years of hands-on heat treat or metallurgical experience, preferably in automotive or aerospace manufacturing
• Demonstrated knowledge and application of CQI-9 Heat Treat System Assessment requirements
• Familiarity with AIAG standards and automotive core tools (APQP, PPAP, FMEA, SPC, MSA)
• Experience conducting and documenting SAT, TUS, and other pyrometry-related activities
• Experience operating batch and continuous furnaces, quench systems, and thermal processing equipment
• Demonstrates ability to directly supervise lab personnel including assigning work, evaluating performance, managing corrective actions, and developing team capabilities.
• Creates accountability, enforces standards, and drives measurable performance improvements.
• Proficient in hardness testing, blueprint reading, GD&T, and metallurgical inspection techniques
• Strong computer skills including Microsoft Office and plant data collection systems
• Excellent troubleshooting, documentation, and analytical skills
• Commitment to safety, quality, and environmental standards
• Ability to lead and train team members on technical and compliance-related topics
• Ability to work independently, manage multiple tasks, and prioritize effectively

Compensation details: 96 Yearly Salary

PI34bc9acf25ca-26289-39818891

Job Title: Engineering - Airframe Stress Analysis Engineer

Location: Fort Worth, Texas 76119

Duration: 12 months contract on W2 (possible extension)

1st (07:00 AM - 03:30 PM)

Onsite Opportunity

Position Responsibilities:

∙ Support airframe structural designs based on trade studies, research, and analysis.

∙ Responsible for performing detailed analysis of advanced composite and metallic structure using classical hand calculations and FE tools to develop high performance airframe structures.

∙ Perform static analysis using industry standard calculations methods (i.e. Bruhn, Roark Flabel, and O.E.M. structures manuals).

∙ Coordinate with other engineering, manufacturing, or specialty personnel to resolve problems.

∙ Apply scientific analysis and mathematical models to predict and measure the outcome and consequence of design, in terms of stress, strength, life, stiffness, and weight, providing alternatives as needed.

∙ Oversee and monitor product acceptance procedures and parameters to achieve product reliability and safety standards (e.g. failure analysis).

∙ Contribute to the completion milestones associated with specific projects (e.g. create functional diagrams and system layouts; review detailed drawings and schematics; define data structure, interfaces and analyze material requirements).

∙ Execute Tasks to Cost and Schedule Requirements.

∙ Support supplier / teammate design activity.

∙ Support test activity, including test plan development, execution, and reports.

∙ Create and present design plans and analysis to leadership with supporting recommendation(s).

∙ Excellent writing, presentation, and communication skills.

Education Requirements:

∙ Bachelor's Degree in Engineering required. Major in Aerospace or Mechanical with focus on structural analysis is preferred. Other degrees may be considered.

Position Requirements:

∙ Multiple levels of experience will be considered with at least 5 years experience in structural analysis. Aerospace industry is preferred but other relevant experience may be considered.

∙ Experience in helicopter or tiltrotor structural design is preferred, including composites.

∙ Must have the ability to communicate efficiently and effectively to coordinate design and analysis activities, prioritize tasks, and report status to design leads.

∙ Must be able to build and maintain effective relationships with customers, internal and external suppliers, as well as horizontal integrations across the other teams to complete design tasks.

∙ Proficiency in Microsoft Word, Excel, PowerPoint, and Outlook is required.

∙ Proficiency in Finite Element Analysis using MSC.NASTRAN and Altair Hypermesh

∙ Must have the ability to work effectively within a team.

∙ Must have the ability to prioritize a variety of assignments.

∙ Good interpersonal and organizational skills are required.

We are seeking a talented individual to support new product development for high current and voltage power conversion and Motor Control Center products. This role offers an opportunity to work in the vibrant city of Milwaukee, WI, known for its rich history, cultural attractions, and thriving industrial sector.

The successful candidate will be responsible for creating and updating CAD drawings from engineering sketches or notes, suggesting design improvements for manufacturability, ensuring drawings meet project standards, and maintaining ECN/ECR documentation following established procedures. This position involves working closely with engineers and peers to exchange and present information, while reporting to the local Development Engineering Manager. The role also includes overseeing the application, conception, creation, release, and support for industrial power control products, ensuring they meet company and industry standards for quality, safety, and reliability, all while optimizing cost and manufacturability.

Key Responsibilities:

• Develop CAD drawings and collaborate with a team on design activities.
• Participate in new product development for high current and voltage power conversion and Motor Control Center products.
• Ensure all drawings meet project standards and maintain ECN/ECR documentation.
• Work with engineers and project managers to present and exchange information.

Qualifications:

• Minimum of 3 years of relevant mechanical CAD software (CREO, Pro/E, AutoCAD) design experience.
• Proficient in manipulating large assemblies (>200 components).
• Ability to read and interpret engineering drawings and documentation.
• Experience with power distribution equipment for 240-690V AC systems.
• Pro-E CAD modeling experience.
• SAP software experience.
• A working knowledge of production part processes: sheet-metal, plastic forming, and machining manufacturing methods.

Experience: 4–6+ Years 

Compensation: $90,000 – $100,000 annually 

Company Description:

120 Degreez MEP is a multidisciplinary Mechanical, Electrical, and Plumbing engineering firm delivering high-performance building systems for commercial, mixed-use, and institutional projects throughout California.

We operate on a structured, performance-based career roadmap from Designer through Principal. Advancement is earned through technical excellence, licensure achievement, leadership development, accountability, and measurable contribution to project profitability.

We value:

• Ownership mentality
• Technical precision
• Deadline reliability
• Leadership maturity
• Revenue awareness
• Long-term professional growth

Core Responsibilities:

• Lead HVAC system design for commercial projects 

• Perform independent load calculations and ventilation analysis 

• Design duct and hydronic systems 

• Coordinate utilities and equipment requirements 

• Lead coordination meetings and resolve design conflicts 

• Respond to plan check comments and CA issues 

• Mentor junior designers and review work for quality 

Comprehensive Employee Benefits Program:

At 120 Degreez, we believe great work comes from well-supported people. Our benefits package is designed to support your health, financial future, professional growth, and work-life balance.

• Paid Time Off (PTO): 80 hours (2 weeks) of paid time off per year, accrued each pay period.
• Paid Sick Leave: 40 hours of paid sick leave provided annually as a lump-sum at the beginning of each calendar year
• Health Insurance: Comprehensive medical, dental, and vision coverage, including 70% employer-paid medical insurance, and 100% employer-paid dental and vision insurances.
• Paid Company Holidays: New Year’s Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, Day After Thanksgiving, and Christmas Day.
• Retirement Plan (401k): Eligibility to participate in the company’s 401(k) retirement savings plan with an employer match up to 3% of salary.
• Life Insurance: 100% employer-paid basic life insurance coverage for eligible employees.
• Career Advancement: Clear technical and leadership career pathways with opportunities for advancement.
• Professional Development: $1,500 annual education, training, and certification allowance to support continued professional growth and licensure advancement.
• Work Environment: Collaborative, non-toxic workplace culture with leadership accessibility, professional growth opportunities, and a strong emphasis on workload balance and career advancement.

Mandatory Skills:

• Mechanical/Thermal Design Verification Testing
• Telecom & Networking product experience
• Excellent written and verbal communication skills

JD:

• Experience working as a Mechanical, or Validation Engineer for electromechanical products
• Degree in Mechanical with Experience 3-5 years
• Telecom equipment product testing knowledge/experience is an added advantage
• Good knowledge about telecom test standards GR, NEBS etc.
• Setting up prototypes in the lab for various MDVT tests (Thermocouple installation, vibration bench set up, wind tunnel operations etc)
• Good communication skills and experience with Microsoft products for generating reports and other functional aspects

Demonstrated knowledge and skills required to interact with other design disciplines, Hardware, Safety, EMC/EMI, SI and Manufacturing Engineers during the product testing

Mechanical Assembler – Structural Enclosures

Pay: up to $30/hr

Shift: 1st Shift | Start as early as 6:00 AM

Type: Ongoing Contract (Strong potential for long-term or direct hire)

We are seeking a hands-on Mechanical Assembler to support the structural build of large industrial enclosure units. This is not a light assembly role—this position focuses on the full structural build process, starting with steel framework and finishing with the installation of exterior components such as siding, doors, and windows.

Candidates with structural assembly, construction, carpentry, or metal fabrication backgrounds are highly encouraged to apply. If you take pride in building things that are square, level, and built to last, this is a great opportunity to put your skills to work in a manufacturing environment.

Key Responsibilities

• Structural Assembly: Build large industrial enclosure units using heavy steel weldments and framework.
• Exterior Installation: Install siding, commercial doors, and windows using proper construction and sealing techniques.
• Blueprint Interpretation: Read and interpret mechanical drawings and blueprints to ensure proper assembly and tolerances.
• Precision Layout: Use measuring tools and leveling techniques to ensure enclosures are square, aligned, and weather-tight.
• Material Handling: Assist with positioning heavy steel frames and moving completed units within the facility.
• Quality & Efficiency: Maintain a strong sense of urgency while ensuring high-quality workmanship.

What We’re Looking For

• Experience in structural assembly, fabrication, construction, or carpentry
• Strong ability to read and interpret blueprints or fabrication drawings
• Experience installing siding, windows, doors, or structural components
• Familiarity with industrial fasteners, sealants, and installation techniques
• Must have a basic personal tool set (impact driver, tape measure, levels, wrenches, etc.)
• Strong communication and organization skills
• Basic electrical experience is a plus, but not required

Why This Role?

• Opportunity to work on large, custom-built industrial units
• Hands-on role where craftsmanship and precision matter
• Stable first shift schedule
• Potential to transition into a long-term or permanent position

If you enjoy building and assembling large structural systems and want to be part of a team that creates complex industrial equipment, we’d like to connect with you.

Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or genetic information.