Difference Between Engineering And Engineering Technology Jobs Remote Jobs in Usa
754 positions found — Page 6
Location: Plymouth MN 55441
Duration: 12 months
As a member of the Acute Therapies Verification and Validation engineering team, you would be responsible for supporting product verification, validation, and compliance test activities on electrical and mechanical medical device components/systems.
Your expertise will be applied to all levels of product development from component prototypes to final system design.
This will include developing, executing, and validating test methods/creating associated documentation. Interface with/support different groups, e.g., R&D, Project Management, Quality, and manufacturing.
Responsibilities include but not limited to:
* Under supervision, Develop/execute verification test methods, protocols, and reports for verification of requirements on components and systems
* Drive quality into product development through analysis, test, and timely feedback of test results back to team
* Under supervision, Design test cases to include test methodology, test setups, materials, equipment, procedure, and acceptance criteria based on requirement and standard
* Execute functional testing of mechanical assemblies, electrical circuits, and systems
* Support hardware team in product development, concept feasibility, pre compliance and change activities by developing test, collecting, and providing test data
* Under supervision, design hardware and/or software tools and fixtures used to execute test methods and analyze data
* Review, understand and characterize electrical/mechanical designs to develop test methods and ensure coverage of requirements
* Read/understand medical compliance standards and requirements, evaluate risk, and develop test procedures to ensure requirements are met
* Perform hands on test execution in the lab and at third party medical device test labs, communicate all defects/issues/failures during the test execution.
* Under supervision, develop and implement feasibility and characterization testing on designs
* Analyze test data for conformance to pre-determined acceptance criteria and record clearly results in testing platforms like ALM.
* Collaborate with System team to better understand requirements and improve test effectiveness.
* Actively participate in improving existing testing scenarios and test cases.
* Maintain laboratory equipment and inventory levels for laboratory supplies
* Perform troubleshooting, hands on rework and calibration of electromechanical Systems
What you'll bring
* Bachelor's degree in Engineering with 1+ years of experience
* Experience with system and component level electromechanical V&V testing, plans/procedures/reports, equipment, and test methods preferred
* Demonstrated results in both Troubleshooting/resourcefulness.
Use own expertise/guidance from others to identify/resolve critical issues.
Understanding/application of root cause analysis methods.
* Knowledge of electrical/mechanical engineering disciplines with ability to read, understand and analyze electrical schematics/ mechanical drawings.
* Experience using electrical/mechanical lab equipment. e.g., oscilloscope, DMM, power supply, force/pressure gauge, caliper, thermometer, flow meter and scales
* Takes a hands-on approach to testing, fault diagnosis and isolation
* Experience creating detailed, clear, and complete documentation and records
* Demonstrated experience collaboratively and effectively across disciplines/project teams
* Comfortable/effective in a fast-paced environment, where small teams share a broad variety of duties
At MVP Health Care, our commitment to meeting the needs of our customers goes beyond our health plans. We're shaping the future of health care-and as an intern, you'll be part of it! Dive into a world of innovation, working alongside experienced professionals who are passionate about making a difference.
This is more than an internship; it's an opportunity to build skills, gain confidence, and make a meaningful impact while discovering what a career in a transforming industry can look like.
What's in it for you:
Our internship program is designed to provide a comprehensive learning experience.
- Build Real Skills: Gain hands‑on experience, practical skills, and industry knowledge through meaningful work and targeted learning opportunities.
- Work on Impactful Projects: Contribute to real projects that support business priorities and address real‑world health care challenges.
- Grow Your Network: Connect with leaders, mentors, and fellow interns through networking events and everyday collaboration.
- Learn from Mentors: Receive guidance and feedback from experienced professionals who are invested in your growth.
- Give Back: Participate in community service initiatives and be part of an organization committed to making a difference.
- Support Your Well‑Being: Experience a supportive culture with programs that promote balance and well‑being.
- Launch Your Career: Join an award‑winning, inclusive workplace and explore a future in a growing, evolving industry.
Qualifications you'll bring:
- Pursuing a degree in Information Technology field; Security or Computer Science a plus. Must be in good academic standing. Minimum GPA of 3.0 on a 4.0 scale.
- The availability to work full-time, 37.5 hours (Monday- Friday 8:30am - 5:00pm)
- The IAM Engineer Intern would support our Identity Management team responsible for architecting, implementing, and supporting Identity Management solutions that provide confidentiality, integrity, and accountability of our systems and data to our employees and constituents.
- Help support an Identity and Access Management program that modernizes the user experience and provides zero-trust security.
- Be instrumental in creating, evolving, and supporting Identity Management governance, processes, best practices, guidelines, and standards.
- Build relationships with various IT teams and the business to translate requirements into technical projects. Provide tier 1 support to our internal clients.
- Curiosity to foster innovation and pave the way for growth
- Humility to play as a team
- Commitment to being the difference for our customers in every interaction
Your key responsibilities:
- Collaborate with and across Agile Scrum teams to design, develop, test, implement, and support technical solutions in full-stack development tools and technologies
- Engage with business and technology partners in designing and delivering scalable software solutions
- Share your passion for staying on top of tech trends, experimenting with, and learning new technologies, participating in internal technology communities, mentoring and being mentored by other members of the engineering team
- Collaborate with digital product managers and deliver robust cloud-based solutions that drive powerful experiences to help our members, grow our business and transform our organization
- Serve as a technical contributor on an Agile Scrum team, promoting quality and completion of sprint goals, while actively participating in Scrum team ceremonies: sprint planning, standups, demos, and retrospectives
- Utilize software engineering technologies like JavaScript, C#, .Net, HTML/CSS, React, NPM, TypeScript, SQL, SSIS, and Git, and a variety of Azure platform tools, frameworks and services
- Be a respectful, communicative team player with a desire to work hard and collaborate with other team members
- Hone your skills by working on creative internal applications
- Work in a collaborative environment, whether you're working onsite or remotely
- Contribute to our humble pursuit of excellence by performing various responsibilities that may arise, reflecting our collective goal of enhancing healthcare delivery and being the difference for the customer.
Where you'll be:
Hybrid (Schenectady, NY office)
Pay Transparency
MVP Health Care is committed to providing competitive employee compensation and benefits packages. The base pay range provided for this role reflects our good faith compensation estimate at the time of posting. MVP adheres to pay transparency nondiscrimination principles. Specific employment offers and associated compensation will be extended individually based on several factors, including but not limited to geographic location; relevant experience, education, and training; and the nature of and demand for the role.
We do not request current or historical salary information from candidates.
Pay Rate: $18 - $25 per hour
MVP's Inclusion Statement
At MVP Health Care, we believe creating healthier communities begins with nurturing a healthy workplace. As an organization, we strive to create space for individuals from diverse backgrounds and all walks of life to have a voice and thrive. Our shared curiosity and connectedness make us stronger, and our unique perspectives are catalysts for creativity and collaboration.
MVP is an equal opportunity employer and recruits, employs, trains, compensates, and promotes without discrimination based on race, color, creed, national origin, citizenship, ethnicity, ancestry, sex, gender identity, gender expression, religion, age, marital status, personal appearance, sexual orientation, family responsibilities, familial status, physical or mental disability, handicapping condition, medical condition, pregnancy status, predisposing genetic characteristics or information, domestic violence victim status, political affiliation, military or veteran status, Vietnam-era or special disabled Veteran or other legally protected classifications.
To support a safe, drug-free workplace, pre-employment criminal background checks and drug testing are part of our hiring process. If you require accommodations during the application process due to a disability, please contact our Talent team at .
Belong. Connect. Grow. with KBR! KBR's National Security Solutions team provides high-end engineering and advanced technology solutions to our customers in the intelligence and national security communities. In this position, your work will have a profound impact on the country's most critical role protecting our national security.
Why Join Us?
- Innovative Projects: KBR's work is at the forefront of engineering, logistics, operations, science, program management, mission IT and cybersecurity solutions.
- Collaborative Environment: Be part of a dynamic team that thrives on collaboration and innovation, fostering a supportive and intellectually stimulating workplace.
- Impactful Work: Your contributions will be pivotal in designing and optimizing defense systems that ensure national security and shape the future of space defense.
Key Responsibilities:
- Acquisition Experience: Provide Acquisition Program Management support designed to assist various product teams in developing and drafting acquisition documentation including, but not limited to: Acquisition Strategies and Plans, Acquisition Program Baselines, Test and Evaluation Master Plans, System Engineering Plans, Life Cycle Sustainment Plans.
- Policy Experience: Apply in-depth knowledge of IC and agency level policy along with a wide range of analytical measurement skills to assist product teams with developing, maintaining, and coordinating Milestone Decision Authority acquisition packages for Milestone approval. Serve as a subject matter expert in Acquisition, aiding in educating the workforce and tracking evolving Acquisition policy.
- Documentation Experience: Develop, draft, provide, and update documentation for acquisition programs to include all documentation required for program Milestone events (MDD, MS A, MS B, MS C, Full Rate Production, Type Classification/Material Release, etc.).
- Critical Thinking: Apply in-depth knowledge of publications, acquisition policy and critical thinking skills to assist product teams with developing, maintaining, and coordinating decision packages (e.g., Corporate Review Boards, Milestone B, Type Classification, Materiel Release) for approval.
- Software Experience: Utilize collaboration software (e.g., Microsoft SharePoint, Global Electronic Approval Routing System) in order to maintain, route, track, and update documentation.
- Support Experience: Support program personnel with programmatic related actions including: preparation of Program Reviews, Decision Briefs, Quad Charts, and Program Procurement and RDT&E Forms.
- Requirements Experience: Provide support to Combat Development community, as required, and assist with the development/update of requirements documents for programs to include: Analysis of Alternatives (AoA), Initial Capabilities Document (ICD), Capability Development Document (CDD), Directed Requirements, Operational Needs Statements (ONS).
Work Environment:
- Location: On-Site
- Travel Requirements: Minimal 0-20%
- Working Hours: Standard
Qualifications:
- Required: Security Clearance: Active TS/SCI with a polygraph
- Education: Bachelor's degree in business or accounting
- Experience: 7 years of related experience
- Acquisition Experience: Management level military or acquisition experience preferred, specifically DAWIA Level II or III in Program Management.
Ready to Make a Difference?
If you're excited about making a significant impact in the field of space defense and working on projects that matter, we encourage you to apply and join our team at KBR. Let's shape the future together.
KBR Benefits
KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, or flexible work schedule. We support career advancement through professional training and development.
Belong, Connect and Grow at KBR At KBR, we are passionate about our people and our Zero Harm culture. These inform all that we do and are at the heart of our commitment to, and ongoing journey toward being a People First company. That commitment is central to our team of team's philosophy and fosters an environment where everyone can Belong, Connect and Grow. We Deliver Together.
KBR is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law.
Duration: 06 months - 3 days onsite per week
Location: Chicago, IL or Tempe, AZ
Project Overview:
These contractor resources will support a broad range of Workday integration initiatives across HR Technology, Finance, Procurement, and various business partners. Their efforts will span designing, enhancing, and maintaining integrations with multiple third party vendors, enabling new capabilities, optimizing existing data flows, and ensuring end to end data quality across upstream and downstream systems. They will contribute to solution design, field mapping, testing, troubleshooting, and deployment of Workday integration enhancements that improve operational efficiency, support evolving business requirements, and strengthen the overall Workday ecosystem.
Experience Level: 3 - Senior
Minimum qualifications:
- Bachelor's Degree in computer science or engineering
- 5+ years of work experience in in Workday, Integrations and API integration
Qualifications (must haves):
- Hands on work experience with Workday
- Experience with Workday Projects (preferably implementation experience)
- Able to write XSLT scripting both XSLT2.0/XSLT 3.0
- Hands on experience on Workday Studio
- Hands on experience in API integration either SOAP or Rest
- Hands on experience on PECI/WECI/PICOF and Core Connectors
- Understanding of Payroll data and Experience on US payroll and Global Payroll
- Ability to resolve issues/troubleshoot application in a high-pressure & time critical environment
- Experience using ITSM Service now tool
- Self-motivated to initiate actions and be responsible for consequent decisions.
- Good programming and debugging skills.
- Strong analytical, design thinking and problem solving skills.
- Strong written/verbal communications skills.
- Good team player and interpersonal skills.
Nice to Have:
- Hands on experience on ADO ( Azure Devops) .
- Exposure to Agile practices ( Scrum /Kanban) .
- Understanding of ITIL Process guidelines, with specific focus on Service Operations and Incident Management.
- Functional Knowledge of HR in finance business.
- ServiceNow Development
Tasks & Responsibilities:
- Resolve incidents/failures and ensure closure within the SLAs
- Development of New Integrations within HR Workstream
- Collaborate with business partners on new and ongoing Workday Projects
- Efficiently Debug issues in case of Production Failure
- Participate in root cause analysis and provide solution/work around for HR cases
- Debug issues , incidents and provide solutions for the same through hands on development
- Proactively identify & implement opportunities to increase efficiency through automation & process efficiencies
- Participate in engineering efforts for ETL solutions i.e. system design , build, deployment, best practices and testing
- Create well documented change requests and follow up for approvals
- Communicate with global stakeholders, other IT teams, and business areas
- Provide Level 3 Support during the time of Production Failures
- Should be flexible for upskilling in different skill sets
- Work with upstream and downstream application teams for any risks or potential issues
Service Desk Lead
Fairview, OR - Onsite
Hours: 5:30AM-2PM M-F
Role Overview
This position is responsible for providing daily technical assistance to employees throughout North America, serving as a bridge between the technology group and other areas of the organization. The main goal is to deliver excellent support for users, drive improvements, foster engagement across departments, and ensure technology initiatives are in line with organizational objectives.
Support duties cover hardware setup, software configuration, and user account tasks. Assistance with key business software (including specialized tools and various online platforms) is also required.
Acting as a point of contact between tech teams and other business units, this individual reviews support patterns, suggests enhancements, and encourages a reliable, customer-focused technology environment.
Key Responsibilities
System Oversight (30%)
- Maintain the platform for technical support requests, handling queue coordination, access control, uptime, and user interactions to provide outstanding IT support throughout the organization.
- Oversee internal collaboration, knowledge bases, and training tools related to technology.
- Ensure integration with other company software and systems.
- Maintain and monitor IT equipment and asset records.
Operational Support (30%)
- Deliver consistent, high-quality assistance to both local and remote team members.
- Develop clear guidelines for communication with staff and stakeholders.
- Address support requests and resolve incidents in accordance with organizational standards, working alongside other groups if necessary.
- Manage escalated issues and oversee workplace technology resources, licenses, and user records.
- Help develop and update documentation of available IT services.
- Follow industry best practices, organizational policies, and security protocols.
Reporting & Analysis (20%)
- Set up and maintain metrics and reporting methods for the helpdesk.
- Share regular updates on technical support performance, satisfaction levels, and issues with relevant parties.
- Track and analyze patterns in incidents and apply approaches to refine processes and boost efficiency.
Quality & Improvement (10%)
- Strive to ensure support is dependable and rooted in strong service principles.
- Spot areas for improved solutions, either by automating workflows or streamlining procedures.
- Document troubleshooting steps, educate colleagues as needed, and stay up-to-date on industry trends.
Leadership Support (10%)
- Assist with meetings, planning, budgeting, and resource allocation for the leadership team.
- Work with external vendors to enhance performance and participate in tech-related projects.
Requirements
Success in this role requires the ability to perform duties efficiently and safely while reflecting company values. Reasonable support is available for individuals needing accommodations.
- Bachelor’s degree in a relevant technical discipline or equivalent training/certification.
- At least three years’ experience in hands-on support or technical helpdesk roles within a structured environment.
- Industry certifications are preferred (e.g., Microsoft, CompTIA).
- Familiarity with ITIL concepts and practical experience in following these standards.
- Strong communication skills, both in writing and verbally, and confidence when working with users of different experience levels.
- Skills in Microsoft environments, office productivity platforms, networking basics, and core business software.
- Knowledge of analytical tools for reporting, dashboards, and measuring support effectiveness.
- Excellent troubleshooting and analytical abilities.
- Ability to research and resolve challenging technical problems.
- Quick to learn and adjust as technology and business needs change.
- Comfortable juggling multiple priorities, working independently, or within a team.
- Commitment to continuous improvement and customer service quality.
Work Environment
Work is mainly done in a comfortable, indoor office setting, with occasional visits to areas outside the office that may not be climate-controlled.
This is a full-time, on-site role, generally scheduled during regular business hours. Occasional overtime, evenings, weekends, or longer shifts may be requested to meet operational needs.
Travel to other workplaces in North America is rare but may be requested, requiring flexibility for both air and road journeys.
There may be times when deadlines are tight and priorities conflict; support from on-site leadership is offered, and situations should be managed professionally to meet objectives and maintain high standards of service.
Summary: Directly reports to QA & EHS Director at our Portsmouth Va. location. Inspect and monitor work performed on government and commercial work items, specializing in Hull, Mechanical and Electrical Inspections for Quality compliance. Review QA Work Packages, QA Work Books, and Re-entry Control (REC) / Technical Work Documents (TWD) packages prior to start-work for completeness, accuracy and compliance with technical specifications and customer requirements. Provide review of certified completed QA Work Packages, QA Work Books, and Re-entry Control (REC) / Technical Work Documents (TWD) packages. Conduct Audits/Surveillances when assigned.
Non-Supervisory. Provide management oversight, and career development of production trades related to quality assurance and safety requirements. Provide Project QA inspections/audits and assessments were requirements cannot be met by trade Quality Control Inspectors.
Duties and Responsibilities:
- Establish and execute Audit/Surveillance Plans for SUBSAFE / Level I / Corporate Component Repair Program (CCRP), Modernization and Manufacturing contract work.
- Establishes basic Test and Inspection Plans for projects. Perform in-process work surveillances, safety surveillances and conduct final work-package review after work-completion.
- Performs internal audit of to monitor compliance with company procedures and performs external audits to evaluate supplier suitability for use. Develop trend analysis and reports.
- Prepares Corrective Action Requests, and Preventative Action requests as related to production work to ensure compliance with established policies, procedures and work instructions.
- Assists Program Managers, Project Managers, and Supervisors/Foreman in the understanding of NAVSEA Standard Item and other customer related requirements to ensure work is conducted accurately and safely.
- Assists in the development of written procedures for Safety, Hull, Mechanical, and Electrical Trades work and tasks
- Monitors compliance with company Quality and Safety Management Systems, Workmanship standards and Customer requirements.
- Develops safety, quality control and inspection procedures for inclusion in test and inspection plans for production Work-Packages.
- Defines test standards and specifies test equipment associated with requirements established in test and inspection plans.
- Schedules and Conducts Safety/Quality Assurance inspections, Audit and Surveillances.
- Performs Audits and evaluations of Suppliers/Subcontractors.
- Works with customer QA/Safety representatives to coordinate inspection and acceptance activities.
- Reviews QA/Safety control requirements with customer representative to assure compliance with requirements.
- Reviews contractually required quality/safety documentation for accuracy and completeness for project/job/contract completion.
- Maintain OQE records retention.
Job Requirements:
- High School GED Diploma or equivalent and specialized training and certifications in Quality Assurance with 10 years total waterfront experience with training and experience in Quality Assurance to include minimum 7 years extensive SUBSAFE/SOC Shipboard/CCRP quality oversight experience.
Preferred Requirements:
- Bachelors Degree and 4 years waterfront SUBSAFE/SOC Shipboard/CCRP quality experience.
- Bachelor's Degree may be substituted with a completed Maritime Trade School / Apprenticeship with 5 years waterfront Quality Assurance experience OR 6 years' military service with specialized training and experience in Quality Assurance to include minimum 5 years extensive SUBSAFE/SOC Shipboard/CCRP quality oversight experience.
Travel: Must be able to travel for extended periods of time (85%)
Job Training: Safety, Quality Assurance and NAVSEA Standards for shipboard work.
Certifications: Quality Assurance Inspector, Quality Assurance Specialist, Quality Assurance Auditor (preferred), NACE/NBPI (desired), NDT Level II (desired).
Base Access:
- Must be able to obtain and maintain access to U.S Military bases and shipyards for performance of job duties.
- Must be able to obtain and maintain Secret Security Clearance.
- Pursuant to the various government contractual requirements, all applicants must be a U.S. Citizen.
Knowledge:
- Knowledge and experience in Submarine systems within SUBSAFE / SOC Boundary to include repair, overhaul, inspection and testing of shipboard systems.
- Knowledge and experience in Submarine Corporate Component Repair Program Assets (valves, actuators, hydraulic cylinders, etc.) to include repair, overhaul, inspection and testing of CCRP assets.
- Knowledgeable in shipyard, maritime, and commercial work practices, quality assurance, safety, Metal-work and contracting methods.
- Knowledge of Navy ship repair processes and procedures.
- Knowledge of OSHA Regulations for Shipyard Employment, NAVSEA Standard Items, Joint Fleet Maintenance Manual (JFMM), NAVSHIPS Tech Manuals (NSTM), SUBSAFE, DSS-SOC and DOD Standards, Military Specifications, Performance Standards, and other customer related specifications and standards
- Knowledgeable in all aspects of workplace Safety.
- Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services.
- Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications.
- Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective fabrication or manufacture and distribution of products.
Skills:
- Able to conduct audits and surveillances.
- Able to conduct tests and inspections of products, services, or processes to evaluate quality or performance.
- Effective written and oral communication skills.
- Able to use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
- Effective interpersonal skills and able to lead/teach others.
- Effective problem solving skills. Provides sound judgment and decision.
- Proficient in Microsoft Office programs including but not limited to Word, Excel, Power Point and Access
Abilities:
- Able to understand written sentences and paragraphs in work related documents.
- Able to read structural, mechanical and electrical drawings.
- Able to anticipate problem and apply general rules to specific problems to produce answers that make sense.
- Able to generate or use different sets of rules for combining or grouping things in different ways.
Physical Requirements/Work Environment:
- Must be able to physically access ships, small craft, and submarines.
- Able operate in: confined Spaces, noisy environment, heavy Industrial conditions, high traffic areas, office environment, meetings and multiple locations.
- Able to Remain calm in: Stressful situations including; high pressure production schedule, strict workmanship requirements, customer interface, regulatory requirements.
- Able to lift, carry and move objects at least 25 lbs. in weight.
- Visual acuity and manual dexterity.
Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.
Make a Difference: VA Diagnostic Imaging Technologists (MRI, X-Ray, Ultrasound) – Portland, OR & Vancouver, WA
Ready to bring your professional skills to those who served our country? Kelly Government Solutions, in partnership with the U.S. Department of Veterans Affairs, is seeking experienced MRI, X-Ray, and Ultrasound Technologists for locum assignments at the VA Portland Health Care System (Portland, OR & Vancouver, WA).
Available Opportunities
- MRI Technologist (ARRT Certified)
- Radiology (X-Ray) Technologist (ARRT Certified)
- Ultrasound (US) Technologist (ARDMS Certified)
Rate: $41.85-$49.21/hr + $5.09 H&W - rolled into hourly (up to) when not taking health benefits.
What to Expect
- Location: Portland, OR & Vancouver, WA—Premier VA Medical Campuses
Shifts: 8, 9, or 10 hours (varies by need)
- 8-hour shifts, 5 days/week
- 9-hour shifts, rotating 4 or 5 days/week
- 10-hour shifts, 4 days/week
- Rotating weekends and holiday coverage required.
- On-call/overtime opportunities for emergencies.
- Assignments: Minimum of 2 days (16 hours) with the potential for extension
Your Responsibilities
- Deliver advanced and routine diagnostic imaging following VA and ARRT/ARDMS protocols
- Prepare, position, and educate patients for exams; ensure safety and comfort at all times
- Operate, maintain, and troubleshoot cutting-edge imaging equipment
- Accurately document procedures and manage patient records in electronic health systems
- Uphold rigorous infection control and patient safety standards
- Participate in on-call rotations and support emergency imaging needs
- Maintain professionalism and empathetic communication in a multidisciplinary team
Role Highlights
MRI Technologists: Operate advanced MRI, follow detailed radiologist protocols, and support specialized imaging needs.
X-Ray Technologists: Deliver a wide range of radiologic procedures (routine to complex), both in-suite and portable; ensure image quality and radiation safety.
Ultrasound Technologists: Conduct standard and specialized ultrasounds, including biopsies; prioritize emergency cases, ensure quality and accuracy, and provide on-call coverage.
Physical & Occupational Requirements
- Regular standing, walking (up to 8 hours), lifting/moving up to 50–100 lbs
- Must have manual dexterity, emotional stability, and color vision
- May encounter infectious diseases and diverse patient needs—PPE and safety protocols provided
Qualifications
- MRI & X-Ray: ARRT certification in your discipline; 2+ years’ hospital experience, with recent (last 6 months) relevant work
- Ultrasound: ARDMS with at least two specialties (e.g., RVT, OB/GYN); 3+ years’ recent hospital experience
- All positions require BCLS (Basic Life Support), health clearance (including PPD, vaccinations), and professional liability insurance
- Must be able and willing to commit to at least a 6-month assignment
- Drug screen and background check required
Why Kelly Government Solutions?
- Weekly pay
- Dedicated recruiter support
- National reach with opportunities for ongoing assignments
- Be part of a VA team making a direct difference in Veterans’ lives
How to Apply
Submit your resume and salary requirements ASAP
- Have questions? Contact us for more details or to inquire about alternative openings nationwide.
Serve with pride. Grow your career. Apply today!
Make a Difference: VA Diagnostic Imaging Technologists (MRI, X-Ray, Ultrasound) – Portland, OR & Vancouver, WA
Ready to bring your professional skills to those who served our country? Kelly Government Solutions, in partnership with the U.S. Department of Veterans Affairs, is seeking experienced MRI, X-Ray, and Ultrasound Technologists for locum assignments at the VA Portland Health Care System (Portland, OR & Vancouver, WA).
Available Opportunities
MRI Technologist (ARRT Certified)
Radiology (X-Ray) Technologist (ARRT Certified)
Ultrasound (US) Technologist (ARDMS Certified)
Rate: $41.85-$49.21/hr + $5.09 H&W - rolled into hourly (up to) when not taking health benefits.
What to Expect
Location: Portland, OR & Vancouver, WA—Premier VA Medical Campuses
Shifts: 8, 9, or 10 hours (varies by need)
8-hour shifts, 5 days/week
9-hour shifts, rotating 4 or 5 days/week
10-hour shifts, 4 days/week
Rotating weekends and holiday coverage required.
On-call/overtime opportunities for emergencies.
Assignments: Minimum of 2 days (16 hours) with the potential for extension
Your Responsibilities
Deliver advanced and routine diagnostic imaging following VA and ARRT/ARDMS protocols
Prepare, position, and educate patients for exams; ensure safety and comfort at all times
Operate, maintain, and troubleshoot cutting-edge imaging equipment
Accurately document procedures and manage patient records in electronic health systems
Uphold rigorous infection control and patient safety standards
Participate in on-call rotations and support emergency imaging needs
Maintain professionalism and empathetic communication in a multidisciplinary team
Role Highlights
MRI Technologists: Operate advanced MRI, follow detailed radiologist protocols, and support specialized imaging needs.
X-Ray Technologists: Deliver a wide range of radiologic procedures (routine to complex), both in-suite and portable; ensure image quality and radiation safety.
Ultrasound Technologists: Conduct standard and specialized ultrasounds, including biopsies; prioritize emergency cases, ensure quality and accuracy, and provide on-call coverage.
Physical & Occupational Requirements
Regular standing, walking (up to 8 hours), lifting/moving up to 50–100 lbs
Must have manual dexterity, emotional stability, and color vision
May encounter infectious diseases and diverse patient needs—PPE and safety protocols provided
Qualifications
MRI & X-Ray: ARRT certification in your discipline; 2+ years’ hospital experience, with recent (last 6 months) relevant work
Ultrasound: ARDMS with at least two specialties (e.g., RVT, OB/GYN); 3+ years’ recent hospital experience
All positions require BCLS (Basic Life Support), health clearance (including PPD, vaccinations), and professional liability insurance
Must be able and willing to commit to at least a 6-month assignment
Drug screen and background check required
Why Kelly Government Solutions?
Weekly pay
Dedicated recruiter support
National reach with opportunities for ongoing assignments
Be part of a VA team making a direct difference in Veterans’ lives
How to Apply
Submit your resume and salary requirements ASAP
Have questions? Contact us for more details or to inquire about alternative openings nationwide.
Job Title: Distribution and Marketing Data Product Manager
Division: Beazley Shared Services - Data Management
Location: Multiple Locations, US
Hybrid Role
Reports To: Head of Data Products
Key Relationships: Chief Data Office, Data Leadership Team, Data Owners, Distribution and Marketing, CRM, Data Governance and Quality, Data Stewards, Data Architects, Delivery Team members, Technology Team, Finance, Underwriting, Operations and other Business Stakeholders
Beazley:
Beazley is a global specialist insurance company with over 30 years' experience helping people,
communities, and businesses to manage risk all around the world. Our products are wide ranging from cyber & tech to marine, healthcare, financial institutions, and contingency, covering risks like the weather, film production or protection from deadly weapons.
We are a flexible and innovative employer offering a friendly, collaborative, diverse and inclusive work environment. We encourage applications from all backgrounds. Collaboration in office spaces is important and we use a hybrid approach with a minimum of 2 days in the office per week.
We have a wonderful mix of cultures, experiences, and backgrounds at Beazley with over 1500 of us working around the world. Employee's diversity, experience and passion allow us to keep innovating and moving forward, delivering the best. We hire people with wide perspectives, and we have set bold diversity targets as we work towards excellence.
Data @ Beazley:
Our Data team supports Beazley's vision by...
* Being bold through pioneering & championing an exciting vision of how people interact with data
* Facilitating innovation by leading the pace of change in data & analytics, and facilitating the latest capabilities and innovative technologies
* Doing the right thing by providing a controlled working data environment that allows all business domains to thrive independently
* Being the single source of truth for enterprise-wide reporting metrics and KPIs
Our Data team is located at multiple offices across UK, Europe and the US. The specified home office location options provide the best balance for being co-located with key Data Office colleagues and business stakeholders.
The Role:
Data is one of Beazley's greatest assets and this roles is critical to supporting our Distribution and Marketing insights, which includes Customer, Broker and Marketing data. We're seeking a strategic and technically savvy Data Product Manager to lead the strategy, development and evolution of data products and insights that empower our distribution and marketing teams. This role is critical to aligning our data, unlocking insights, and informing growth opportunities across our specialty portfolio. In this role, you will also work to mature data literacy and capabilities as Beazley undertakes a significant investment in modernization, enabling you to embed a culture of data excellence and innovation in our delivery.
Key Responsibilities:
Partner with the global Distribution and Marketing team to understand, prioritize and develop data products and insights that support their business strategy.
Build and own a roadmap to provide regular updates on delivery commitments for data products, insights, enhancements and queries.
Manage stakeholder relationships to support the growth strategy for Beazley customers, brokers, teams and products.
Produce insights and key data trendsthat highlight business performance, RoI, efficiencies and game-changing growth opportunities.
Inspire the adoption and use of insights to drive decisions in investment and operations that improve efficiency and drive growth by leading demonstrations and hands on training sessions.
Lead a team of Product Owners, Product Analysts, Business Analysts and a development team to deliver and maintain data products and insights; maintaining a backlog of work within Jira.
Represent the business in data governance discussions, escalating issues as appropriate.
Ensure that data product development considers policy, methodology and standards, and ensure these are adhered to during product development.
Evaluate the performance of your data product portfolio against KPIs defined by the business and provide feedback on the value delivered.
Proactively anticipate business needs and look for opportunities to bring innovation or new approaches into the user design, experience, product development and insights.
Relentlessly focus on the Distribution and Marketing team as a customer, delivering high quality data and insights that are clear and inspire action.
Partner with the Data Governance Group and CRM solution team (Customer Relationship Management) to drive improvements in our Customer and Broker data quality through MDM and other tools.
Provide leadership, direction, development and support to direct reports (including off-shore resources).
Essential Criteria:
Bachelor's degree in Business, Marketing, Data Science, Computer Science, Economics, Statistics or related field; Master's degree preferred
Proven experience in data product management, marketing analytics or distribution strategy, preferably in insurance or financial services
Experience working with data, building data models, and sharing insights
Skills and Abilities:
Strategic and curious with the ability to design and develop data and insights that support our Distribution and Marketing team's goals, planning, performance and incentives that drive growth
Understand the specialty insurance market, customer segmentation and distribution channels, with experience in North America, Lloyd's, Retail and Wholesale markets preferred
Ability to lead workshops that help your stakeholders identify data needs and articulate their desired user experience, with the ability to build dashboards preferred
Strong organization and communication skills with the ability to direct work, document requirements and present demos
Advanced technical skills with the ability to dive into the data, identify anomalies, and provide high quality, trusted data
Understanding of Specialty Insurance principles and key drivers to create opportunities, loyalty and growth
Knowledge and Experience:
Experience in Data Products, Data Analytics, Data Science, Statistics, Economics or related fields in Insurance, Financial or sales organizations preferred
Strong understanding of MDM and CRM systems and their use with Customer and Broker data
Proficiency in data visualization (Power BI), analytics platform (Snowflake), dashboard design and data storytelling
Experience working with insurance data, and in particular a strong understanding of pipeline intelligence for sales growth/ targeting and performance
Ability to use predictive modeling to drive an understanding of performance, customer behavior, and prospective renewals/ growth to help the Distribution Sales team focus on the best opportunities
Experience managing relationships and teams of stakeholders, business analysts, data analysts, data architects, data modelers, data engineers and testers using agile processes
Skills in data engineering technologies like Kafka, Snowflake / Snowpark, DataBricks, Jira and Agile principles
Experience in managing and manipulating large internal and external datasets
Knowledge of relational and dimensional database structures, theories, principles, and practices
Driven and proven team player with ability to work with all levels in a highly intellectual, collaborative, and fast paced environment
Excellent communication skills, with the ability to tailor them appropriately for different audiences, technical backgrounds, and seniority
Who We Are:
Beazley is a specialist insurance company with over 30 years' experience helping people, communities and businesses to manage risk all around the world. Our mission is to inspire our clients and people with the confidence and freedom to explore, create and build - to enable businesses to thrive. Our clients want to live and work freely and fully, knowing they are benefitting from the most advanced thinking in the insurance market. Our goal is to become the highest performing sustainable specialist insurer.
Our products are wide ranging, from cyber & tech insurance to marine, healthcare, financial institutions and contingency; covering risks such as the weather, film production or protection from deadly weapons.
Our Culture
We have a wonderful mix of cultures, experiences, and backgrounds at Beazley with over 2,000 of us working around the world. Employee's diversity, experience and passion allow us to keep innovating and moving forward, delivering the best. We are proud of our family-feel culture at Beazley that empowers our staff to work from when and where they want, in an adult environment that is big on collaboration, diversity of thought and personal accountability. Our three core values inspire the way we work and how we treat our people and customers.
- Be bold
- Strive for better
- Do the right thing
Upholding these values every day has enabled us to become an innovative and responsive organization in touch with the changing world around us - our ambitious inclusion & diversity and sustainability targets are testament to this.
We are a flexible and innovative employer offering a friendly, collaborative, and inclusive working environment. We actively encourage and expect applications from all backgrounds. Our commitment to fostering a supportive and dynamic workplace ensures that every employee can thrive and contribute to our collective success.
Explore a variety of networks to assist with professional and/or personal development. Our Employee Networks include:
- Beazley RACE - Including, understanding and celebrating People of Colour
- Beazley SHE - Successful, High potential, Empowered women in insurance
- Beazley Proud - Our global LGBTQ+ community
- Beazley Wellbeing - Supporting employees with their mental wellbeing
- Beazley Families - Supporting families and parents-to-be
We encourage internal career progression at Beazley, giving you all the tools you need to drive your own career here, such as:
- Internal Pathways (helping you grow into an underwriting role)
- iLearn (our own learning & development platform)
- LinkedIn Learning
- Mentorship program
- External qualification sponsorship
- Continuing education and tuition reimbursement
- Secondment assignments
The Rewards
- The opportunity to connect and build long-lasting professional relationships while advancing your career with a growing, dynamic organization
- Attractive base compensation and discretionary performance related bonus
- Competitively priced medical, dental and vision insurance
- Company paid life, and short- and long-term disability insurance
- 401(k) plan with 5% company match and immediate vesting
- 22 days PTO (prorated for 1st calendar year of employment), 11 paid holidays per year, with the ability to flex the religious bank holidays to suit your religious beliefs
- Up to $700 reimbursement for home office setup
- Free in-office lunch, travel reimbursement for travel to office, and monthly lifestyle allowance
- Up to 26 weeks of fully paid parental leave
- Up to 2.5 days paid annually for volunteering at a charity of your choice
- Flexible working policy, trusting our employees to do what works best for them and their teams
Salary for this role will be tailored to the successful individual's location and experience. The expected compensation range for this position is $130,000-$150,000 per year plus discretionary annual bonus.
Don't meet all the requirements? At Beazley we're committed to building a diverse, inclusive, and authentic workplace. If you're excited about this role but your experience doesn't perfectly align with every requirement and qualification in the job specification, we encourage you to apply anyway. You might just be the right candidate for this, or one of our other roles.
We are an equal opportunities employer and as such, we will make reasonable adjustments to our selection process for candidates that indicate that, owing to disability, our arrangements might otherwise disadvantage them. If you have a disability, including dyslexia or other non-visible ones, which you believe may affect your performance in selection, please advise us in good time and we'll make reasonable adjustments to our processes for you.
Work Location: 1915 Hurd Drive, Irving, TX, USA, 75038
Assignment Duration: 12 months
Work Schedule: Monday-Friday, 6:00 AM - 2:30 PM (Training Schedule: 8:45 to 3:30 Monday 7:00 to 3:30 Tuesday; 6:00am to 2:30 next 8 days)
Work Arrangement: Onsite
Job Summary:
Working under general supervision, this position is responsible for the production of high-quality medical device instruments. This position includes detailed assembly and testing of various electronic components and finished devices in a controlled manufacturing environment.
Job Responsibilities:
* Performs testing of electronic components and assemblies using automated test equipment
* May perform mechanical assembly of electromechanical subassemblies and devices
* Ability to read, comprehend and follow written procedures; understand and follow verbal instructions. May instruct others in the use of all manuals, test procedures and documentation associated with specialized equipment.
* Reads and interprets engineering drawings, schematics and complex test procedures.
* Participates in continuous improvement/quality initiatives in order to enhance production processes to achieve quality and profitability metrics.
* Maintains accurate records to ensure Device History Records and quality documents are accurate, all parts are traceable and quality issues can be addressed to assure the quality of all products.
* Prioritizes work by determining the sequencing and timing of different jobs based on precedence and importance.
* Positively represents the company during tours by demonstrating techniques and sharing appropriate information.
* Supports all Company initiatives as identified by management and in support of Quality Management Systems (QMS), Environmental Management Systems (EMS), and other regulatory requirements.
* Complies with U.S. Food and Drug Administration (FDA) regulations, ISO or other regulatory requirements, Company policies, operating procedures, processes, and task assignments.
* Adheres to all environmental, health and safety SOP's, equipment, policies and procedures, including any department specific requirements.
* Maintains positive and cooperative communications and collaboration with all levels of employees, customers, contractors, and vendors.
Minimum Qualifications:
* Experience with electronic assembly and test in a medical device industry preferred.
* High School Diploma or equivalency is required, preferred AAS
* 2 or more years experience with electromechanical assemblies/electronic manufacturing, technical certifications, etc. preferred
Preferred Qualifications:
* Experience in troubleshooting equipment, building and or testing of electronic assemblies
* Working knowledge of IPC standards and use of complex tools and equipment specific to functional areas
* Experience in GMP, ISO, and FDA controlled environments preferred
* Ability to work within a team and as an individual contributor in a fast-paced, changing environment.
* Strong verbal and written communications with ability to effectively communicate at multiple levels in the organization.
* Multitasks, prioritizes and meets deadlines in timely manner.
* Strong organizational and follow-up skills, as well as attention to detail.
* Ability to maintain regular and predictable attendance.
* Ability to work scheduled overtime as required is preferred.
* Ability to hand and lift up to 25 lbs. as needed for specific job functions
* Must be able to sit and/or stand for long periods of time.
* Ability to frequently sit, stand, walk, reach within hands and arm's length, stoop, kneel and crouch.