Derma Made Jobs in Usa
3,323 positions found — Page 9
Controls & Integration Engineer III, Electrical
Location:
Jessup, MD
Job Id:
914
# of Openings:
2
TITLE: Controls & Integration Engineer III, Electrical
LOCATION: Jessup, MD
POSITION SUMMARY: Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including building management systems, power system automation and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customers' complex needs.
Specific areas of expertise for this position include power chain monitoring and control systems in Data Centers and /or mission critical environments. Experience in Electrical Power Monitoring Systems (EPMS) and field device configuration such as gateways, PLC, Meters, Relays, and SCADA/HMI software. Experience in Building Automation Systems (BAS) and configuration/programming of field controllers is beneficial.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
- Design / Engineering
- Generate design documents for SCADA/Automation projects
- Develop design document narratives
- Perform requirements analysis
- Generate Sequence of Operations (SOO) / System Functional Documentation
- Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
- Comment Resolution
- Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
- Review design document narratives
- Perform execution and design scope gap analysis
- Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
- Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
- Assist in reviewing project specifications
- Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
- Programming
- Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
- Testing / Troubleshooting / Deployment / Commissioning
- Assist senior engineers in creating and updating testing and commissioning procedures
- Preparation of test reports
- Originates test procedures
- Commissioning of deployed systems
- Development of test equipment and simulation devices
- Perform Factory and Field Testing
- Maintenance
- Perform troubleshooting on service calls to existing and legacy system operators
- Perform hardware / software upgrades and replacements on existing systems
Managerial Responsibilities
- Estimates
- Assists senior engineers in preparation of cost estimates and supporting documentation
- Work with relevant stakeholders to review scope of project
- Conduct any surveys, inspections, tours, etc. of client sites, as required
- Assists senior engineers in evaluation and pricing of change orders from vendors
- Personnel Management
- Assigns tasks and coordinates with Technical Staff
- Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
- Bachelor's degree in electrical engineering and 5-7 years field experience
- Associate degree in the electrical field and 10 years field experience
- High school diploma and 15 years field experience
- 5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
- Experience in reading electrical and control schematics
- Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
- Experience in testing and troubleshooting control and protection systems
- Experience using basic electrical and hand tools
- Experience using testing, calibration, or industry-specific tools and software
- Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
- Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
- Must be a US CITIZEN
Computer/Networking Skills:
- Experience in OT and IT networking technologies and topologies
- Experience troubleshooting and diagnosing OT and IT networks and protocols
- Experience in CAD/CAE Software (Visio, AutoCAD)
- Experience in schedule management software (Project, Primavera P6)
- Standard Office Software (Microsoft Word, Excel, Access etc.)
Certificates and Licenses:
- Required Certifications
- Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
- Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
- Preferred Licenses / Certifications
- Design Build Institute of America (DBIA)
- Certified SCADA Security Architect (CSSA)
- Certified Automation Professional (CAP)
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
*We Utilize E-verify
#LI-TG1
Pay Range: $98,891 - $148,392 per year
Apply for this Position
Controls & Integration Engineer III
Location:
Jessup, MD
Job Id:
789
# of Openings:
1
TITLE: CONTROLS & INTEGRATION ENGINEER V
LOCATION: JESSUP, MD
*Salary Negotiable
POSITION SUMMARY:
Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including industrial controls and power controls and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customer's complex needs.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
Design / Engineering
- Initiates design documents for small projects and in support of large programs
- Develops design documents narratives
- Performs requirements analysis
- Develops Sequence of Operations / System Functional Documentation
- Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
- Develops Specifications
- Performs QA/QC and technical reviews of designs
- Plans and Design Procedures and Equipment for Integrated Systems Factory Testing
- Comment Resolution
Mechanical-focused controls engineer (BAS/BMS)
- Experience on EPMS monitoring
- Certifications in Platforms (at least one), familiarity with any others preferred: Ignition, Aveva, Automated Logic, Siemens, Schneider EBO, Niagara N4, Iconics Gen64
- Experience with Federal Government controls projects (ICS/EMCS/UMCS) preferred
- Familiarity with Cisco network switch programming and design preferred
Programming
- Lead programming / configuration team efforts for complex automation and SCADA applications.
- Program / Configure / troubleshoot PLCs, RTUs, and/or HMI systems
- Testing / Troubleshooting / Deployment / Commissioning
- Author testing / commissioning procedures
- Preparation of test reports
- Originates test procedures
- Commissioning of deployed systems
- Development of test equipment and simulation devices
- Perform Factory and Field Testing
Maintenance
- Perform troubleshooting on service calls to existing and legacy system operators
- Perform hardware / software upgrades and replacements on existing systems
Managerial Responsibilities
Estimates
- Conducts any surveys, inspections, tours, etc. of client sites, as required
- Prepares cost estimates and supporting documents for small projects
- Perform hardware / software upgrades and replacements on existing systems
- Evaluation and pricing of change orders
Personnel Management
- Assigns technical tasks and coordinates with entry-level engineers
- Assigns tasks and coordinates with Technical Staff
QUALIFICATIONS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
- Experience in reading electrical and control schematics and plans
- Experience in control system startup, configuration, and calibration
- Experience in testing and troubleshooting control systems
- Experience using basic electrical and machinist hand tools
- Experience using testing, calibration, or industry-specific tools and software
- 3-7 years' experience
- Bachelor's degree in engineering or higher
- Associate degree (add 3 years)
- High school diploma (add 5 years)
- Must be a US Citizen
Computer Skills:
- Experience in computer networks
- Experience in CAD/CAE Software (Visio, AutoCAD)
- Experience in schedule management software
- Standard Office Software (Microsoft Word, Excel, etc.)
Certificates and Licenses:
* Required Certifications
- Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
- Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
* Preferred Licenses / Certifications
- Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
- Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
- Design Build Institute of America (DBIA)
- Engineer in Training (EIT) in relevant in field
Supervisory Responsibilities:
* No supervisory responsibilities
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
CPG Participates in E-Verify
Learn more about CPG by checking out our website here
#LI-TG1
Pay Range: $98,891 - $148,392 per year
Apply for this Position
Critical Systems Technician I, HVAC
Location:
4118 Vine St
Abilene, TX
Job Id:
647
# of Openings:
1
TITLE: Critical Systems Technician I, HVAC
LOCATION: Abilene, TX
POSITION SUMMMARY: The Critical Systems Technician I, HVAC works under the direct supervision of senior technician and is required to assist in the operations, maintenance, and monitoring of the data center and supporting infrastructure.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Perform work in a thorough and neat manner in accordance with industry standards, codes, and laws.
Assist with and gain experience from preventative maintenance, trouble diagnosis, routine and emergency maintenance and repairs with direct supervision to equipment including but not limited to:
Air and water-cooled reciprocating chillers
Centrifugal and screw package chillers
Natural gas boilers and unit heaters
Electric duct heaters
Cooling Towers
Pneumatic, DDC and Variable Frequency Drive controls
HVAC air distribution systems, AHU'S, FCU'S, Fans and other devices used in air distribution.
Various types of water pumps used in the HVAC industry.
Responsible for maintaining their assigned equipment in a clean, first class, efficient operating condition.
Strive for continual improvement of technical skills through experience and trade literature.
Exhibit a desire to learn and excel in the HVAC industry.
Required to perform after-hours assignments.
Perform other duties as assigned by supervisor.
Regular and reliable attendance is an essential job function.
QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience (Desired):
High School Diploma/GED required
Knowledge of refrigeration principles
Working knowledge of basic electricity for HVAC and HVAC diagnostic tools and instruments
Minimum of 1 year of HVAC service experience required, 2 years preferred
Computer Skills:
Proficient in Microsoft Office or related software.
Certificates and Licenses:
HVAC/R Servicing Certificate preferred
EPA refrigerant recovery certification type I and II required, type III preferred
Clear and valid Virginia/Maryland driver's license
Supervisory Responsibilities:
No supervisory responsibilities with this position.
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to sit; Standing and walking is required. The noise level in the work environment is usually moderate. The employee must occasionally lift and carry up to 50 pounds.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
CPG Participates in E-Verify
Pay Range: $20.54 - $30.84 per hour
Apply for this Position
Human Resources Manager
Location:
19775 Belmont Executive Plaza
Suite 200
Ashburn, VA
Job Id:
955
# of Openings:
1
Title: HUMAN RESOURCES MANAGER
Location: Ashburn, VA (in office Mon-Thurs, remote on Friday)
CPG Beyond, Inc., a fast-growing mission critical (data center) company in Ashburn, Virginia, seeks a seasoned Human Resources Manager to work on-site in a quick-paced, growing environment. This is a hands-on position accountable for the day-to-day aspects of human resource functions such as payroll, on/offboarding, orientation, performance management, benefits administration and office administration. The following duties are performed personally or through subordinate support. This is an in-person position and will be required to be in the Ashburn, HQ office Monday - Thursday, remote on Fridays.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- Must intimately understand the payroll process and ensure accurate payroll processing for the organization. Knowledge of Paycor and NetSuite preferred.
- Initiates communication and roll out of employee policies and handbook updates across the organization
- Facilitation of organizational changes and data integrity in the HRIS
- Oversees heavy volume of on/off boarding of personnel throughout the organization and conducts weekly / bi-weekly orientations
- Assists managers with employee relations issues, such as counseling, PIPs and other actions
- Attends and participates in employee disciplinary meetings, terminations, and investigations
- Manages the annual performance review process and communication plan, to include guiding managers through goal setting, coaching, and performance review processes
- Manages benefits administration, 401k administration, open enrollment and employee education as needed
- Manages worker's compensation and collaborates with the Safety team on necessary reporting and return to work initiatives
- Provides mentorship to subordinates, supervisors and leaders across the organization
- Ensures compliance with Federal mandates such as OFCCP, Affirmative Action, required Federal reporting
- Ensures compliance with federal, state, and local employment laws
- Oversees other HR team members
QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
- Bachelor's degree in human resources or related field; or equivalent work experience
- 5 - 8 years Human Resources Manger experience with an emphasis on payroll and onboarding, 3-4 years managing and mentoring direct reports preferred
- Utilizes strong interpersonal skills to build and maintain professional, trusting relationships with managers and employees across the company
- Ability to effectively take initiative, multi-task competing priorities, and remain focused/organized in a fast-paced environment with limited supervision
- Ability to make independent judgment, establish trust and maintain confidentiality while understanding when to escalate matters appropriately
- Ability to determine and utilize appropriate methods of dealing with human behavior in a variety of business circumstances
- Demonstrates the following competencies: excellent written and verbal communication skills, problem-solving and decision-making skills, and customer service skills
- Strong knowledge of employment laws and HR best practices
Computer Skills:
- Proficiency in Microsoft office or similar software, Paycor, NetSuite, HRIS, and ATS platforms
- Certificates and Licenses:
- Professional in Human Resources (PHR) desired
- Supervisory Responsibilities:
- Directly supervises 1 or more employees. Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems.
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- Prolonged periods of sitting at a desk or working on a computer. Must be able to lift up to 15 pounds at a time. May be required to walk around facility.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
*We Utilize E-Verify
#LI-TG1
Pay Range: $98,891 - $148,392 per year
Apply for this Position
Mechanical Commissioning Agent II
Location:
Remote
Job Id:
897
# of Openings:
1
TITLE: Mechanical Commissioning Agent II
LOCATION: Various worksites within the US/ Remote
POSITION SUMMMARY: The Data Center Mechanical Commissioning Agent II executes commissioning of data center critical systems including generators, CRAC, roof top AHUs, humidifier, pre-action and wet sprinkler systems, chillers, cooling towers, chill water pumps, exhaust fans and digital electrical distribution equipment. This person is responsible for conducting reviews of client design packages, monitoring, and analyzing FAT and First of Kind equipment Level 3 tests and developing O&M documentation to serve as a reference for data center mechanical equipment. The Data Center Commissioning Engineer is critical in the company's continued success and growth by ensuring that testing has been executed and the client's data centers operate at maximum operational efficiency.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- Manage projects, plans, provide and gather specifications, and execute assignments in a multidisciplinary engineering Commissioning role for large facility projects.
- The commissioning experts adhere to a thorough quality management/QC process and procedures.
- Participate in daily commissioning activity meetings which services include: Equipment pre-start-up and start-up procedures; Development of standard operating procedures (SOP's) and Methods of Procedures (MOPs); Comprehensive Commissioning documentation.
- Prepare commissioning test procedures and reports; Develop and maintain commissioning logs, equipment checklist, and other tools to track commissioning projects; Write comprehensive reports which include the following sections: recommendations for optimizing building operations, functional checklists, list of deficiencies, equipment operation and maintenance manuals.
- Review design criteria, specifications, drawings, equipment submittals, and other documentation pertinent to commissioning.
- Integrated system testing; Load Bank Testing; Compilation of all testing procedure results.
- Develop and administer functional tests for various systems, such as: electrical distribution systems, UPS, standby generators, etc.
- System Assembly; Commission plan preparation; Follow company QC process and procedures.
- Help lead and manage any external resources; Schedule and direct periodic commissioning meetings; Attend construction and coordination meetings if required for the project.
- Interface with clients, contractors, equipment vendors and owners' agents as needed; Execute project assignments; Interface with project contractors, vendors, and testing technicians; Interact with all facets of the company: engineering, design, etc.
- Verify results of test reports
- Assist with field troubleshooting of commissioned equipment as needed.
- Must be US citizen
- Must be able to travel approximately 75% of time
QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience (Desired):
- Bachelor's / Associates Degree in engineering a plus or comparable experience
- 3-5 experience in the Engineering Field
- A/E experience working in complex facilities or mission critical projects a big plus
- Previous Data Center / Mission Critical experience a must
- Electrical equipment testing experience in a Critical Facilities / facility environment
- Experience with IEEE/ASHRAE procedures and protocols a plus
- Possess basic knowledge of systems design for various projects
Computer Skills:
- Experience using Microsoft Word, Excel, and Microsoft Project
Certificates and Licenses:
- No Certificates or licenses required
Supervisory Responsibilities:
- No supervisory responsibilities with this position
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- While performing the duties of this job, the employee is regularly required to sit; Standing and walking is required. The noise level in the work environment is usually moderate. The employee must occasionally lift and carry up to 50 pounds.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
Pay Range: $74,851 - $112,222 per year
Apply for this Position
Apply
Description
12 hour days or 12 hour nights
SUMMARY: Assist operator in operation of the press.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following:
- Support operator's efforts to meet budgeted targets.
- Hang substrates on press.
- Know register control system.
- Understand all SOP's and to be trained in them.
- Run press to approved specifications.
- Properly fill out all paperwork, daily reports, final release, consumption reports, and roll tickets.
- Know and follow all safety rules.
- Prep print carriages.
- Make up doctor blades.
- Actively participates in safety programs and makes safety observations.
- Other duties as assigned.
Requirements
QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION and/or EXPERIENCE
High school diploma or general education degree (GED); and one to three months related experience and/or training; or equivalent combination of education and experience.
LANGUAGE SKILLS
Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.
MATHEMATICAL SKILLS
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
REASONING ABILITY
Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear. The employee frequently is required to reach with hands and arm. The employee is occasionally required to walk. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts, fumes or airborne particles, and toxic or caustic chemicals. The noise level in the work environment is usually moderate.
American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at .
Salary Description
$27.92-$30.78
Apply
Description
At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.
LOCATION: Rochester, NY
SUMMARY: The primary focus of the intern will be to assist the technical staff testing physical properties of flexible packaging, both for new development and production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
- Work in the Corporate lab gathering data such as bond strength, seal strength, tensile strength, moisture/oxygen barrier, sustainability and other material testing.
- Tasked with project work and analysis of the data they collect.
- Other duties as assigned.
Requirements
QUALIFICATION REQUIREMENTS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION and/or EXPERIENCE
Pursuing a Bachelor's degree in Packaging Science.
Experience with lab equipment such as tensile tester, heat sealer, etc.
Experience with Microsoft Excel
Ability to gather data competently into a report format
Statistical Experience is optional
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the public.
MATHEMATICAL SKILLS
Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee frequently is required to sit and reach with hands and arms. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 10 pounds.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.
If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:
.
Salary Description
$22/hr
Apply
Description
At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.
LOCATION: Rochester, NY
SCHEDULE: 12 hour shifts rotating day/night schedule
SUMMARY: Identifies and segregates defective material within individual slit rolls. Combines leftover good material into finished rolls and palletizes for shipment to the customer.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.
- Facilitate on the job training and instruction for team members on the correct use of tools and equipment to ensure proper safety and operating procedures are followed.
- Mounts slit rolls of product onto shaft of machine using lift cart. Removes rolls as well.
- Sets up and makes necessary adjustments to the machine.
- Must be able to identify defects and splice good material together per spec.
- Reads and understands specs of products being run. Must know packaging materials required for palletizing finished product also. Occasionally uses hand tools to prepare packaging materials.
- Completes daily production reports.
- Operates stretch wrap machine to wrap finished pallets.
- Regularly cleans machine and surrounding area.
- Actively participates in safety programs and makes safety observations. Follows plant safety rules.
- Other duties as assigned.
Requirements
QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION and/or EXPERIENCE
High school diploma or general education degree (GED). Dr Winder experience a plus.
LANGUAGE SKILLS
Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
MATHEMATICAL SKILLS
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common, fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
REASONING ABILITY
Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel. The employee is occasionally required to stand; walk; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to vibration. The noise level in the work environment is usually.
moderate
American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.
If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:
.
Salary Description
$24.47-25.19
Apply
Description
At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.
LOCATION: Columbus, WI
SUMMARY: Ensuring the safety and regulatory compliance of food contact packaging materials is a critical business requirement. The Corporate Regulatory Compliance Manager is responsible for developing and maintaining programs that establish our packaging materials are in compliance with regulations in North America, Europe, and other countries our packaging materials are sold in. By applying technical, organizational and project managerial skills, guidance will be provided to Packaging R&D, Sales, Quality, and Manufacturing teams on packaging regulatory matters.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following, as well as other duties as assigned.
- Own, Develop, and Manage internal processes, governance and systems/databases to efficiently maintain regulatory compliance of packaging materials; both supplier regulatory information and communications to customers.
- Facilitate and implement legal advice into our business regarding food contact material compliance.
- Respond to customer surveys and requests for regulatory information.
- Collaborate with external suppliers to ensure newly developed or revised packaging materials meet regulatory requirements of targeted applications.
- Proactively anticipates potential hurdles and works with sales and technical teams to resolve.
- Keep abreast of key regulatory and consumer developments for packaging materials via workgroups, literature reviews and industry news. Determine business implications, communicate with cross functional stakeholders, and put action plans in place to address.
- Represent APC at conferences and participation in professional association activities including industry workgroups focused on packaging and food safety.
- Provide training and guidance on regulatory requirements for packaging specifications.
- Manage verification testing and maintain requirements to ensure our packaging materials are safe for use as intended.
- Lead the process to ensure that new materials entering our facilities have been evaluated for food safety and that they are safe for their intended use.
- Manage the process for other packaging based regulatory information to include USP, Drug Master File, Sustainable Materials, End of Life Packaging Responsibilities such as EPR and PPWR, and other material certifications.
Organizational Relationships:
- Reports directly to the Director of R&D and Technical Solutions who provides overall strategic direction.
- Manages direct report(s) to ensure objectives are met and the team is responsive to customers and other stakeholders.
- Interacts with Customers, Suppliers, Sales, Purchasing, Technical, Quality, and Manufacturing Departments at each Center of Excellence to ensure materials have been assessed for their intended use, and supports the required customer documentation as needed.
- Responsible for all discussions and communications with legal advice and customers.
Competencies/Abilities:
- Ability to organize large amounts of information.
- Ability to communicate effectively and professionally with suppliers and customers.
- Ability to visibly lead and make decisions in a fast paced environment.
- Ability to create and manage processes in an ambiguous environment.
- Ability to create plans and organizational alignment to resolve issues.
- Ability to understand and interpret government regulations
- Strong interpersonal and influencing skills.
- Flexibility to travel up to 10% of time.
Requirements
QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION and/or EXPERIENCE
Bachelor's degree (B.S) in Engineering, Quality, Packaging Science / Engineering, Chemical Engineering, Chemistry, Material Science or Food Science. Minimum 3-5 years' experience in regulatory compliance for packaging materials. Minimum 5-10 years' technical experience in food packaging.
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry.
REASONING ABILITY
Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to use hands to finger, handle, or feel. The employee is occasionally required to reach with hands and arms. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, color vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts, fumes or airborne particles, and risk of electrical shock. The noise level in the work environment is usually moderate.
American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.
If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:
.
Apply
Description
At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.
LOCATION: Chili, NY
HOURS: Nights11pm- 7am
SUMMARY: Assist in the operation of the Laminator in the safest, most effective, and efficient manner while adhering to established quality standards.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
- Participate in training, embrace concepts of and actively practice the SPOT Safety Program fundamentals to aid American Packaging Corporation's efforts to achieve a zero-accident rate.
- Locate material for the present job and upcoming jobs so that the machine may operate efficiently.
- Sign onto and use recipe program to load process conditions onto the machine and enter all of the necessary process data.
- Properly flag rejects in master rolls accurately for next operation.
- Monitor pumping systems as outlined to maintain proper mix ratio.
- Understand and utilize all appropriate SOP's.
- Aid in mounting impression/transfer sleeves during changeovers.
- Read, understand, interpret and utilize all information received from both the job jackets, Product Specs and Material picking program.
- Perform and manage all necessary cleaning and housekeeping duties including cleaning the laminator, scrubbing all rollers and pumps, changing filters, picking up debris around the machine, end of order clean-up, and in-process machine laminator cleaning.
- Assist in machine set-up's/changeovers by utilizing the information on the job jacket and any necessary equipment. This includes preparing anilox rolls and sleeves for the laminator, changing anilox rolls, etc.
- Complete necessary quality checks at machine and complete check off paperwork.
- Attend and participate in all scheduled meetings (Continuous Quality Improvement, safety, special projects, departmental, etc.).
- Comply with all company policies and procedures.
Requirements
QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION and/or EXPERIENCE:
- High school diploma or GED
- Previous experience in APC manufacturing positions or specific industry related printing/laminating/bag making experience.
- Acceptable prior work history
LANGUAGE SKILLS
Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization.
MATHEMATICAL SKILLS
Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Ability to compute percentages and interpret bar graphs.
REASONING ABILITY
Ability to solve practical problems and deal with a variety of variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form.
OTHER SKILLS & ABILITIES
Candidate must possess/exhibit the following skills/abilities:
- Accuracy in recording
- Autocount
- Communication Skills: technical information, internal/external customers, all levels of employees
- Conflict Resolution
- Attention to detail.
- Ability to operate powered industrial trucks.
- Independence
- Mechanical aptitude
- Organizational skills
- Safety
- Shift work
- Teamwork
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is occasionally required to stand, walk, sit, reach with hands and arms, stoop, kneel, crouch or crawl, climb and balance. The employee is frequently required to use hands to finger, handle or feel objects, tools or controls. The employee is regularly required to talk or hear and taste or smell.
This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, distance and the ability to adjust focus.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee works near moving mechanical parts and is exposed to fumes or airborne particles (works in an environment where solvent based inks are used). The employee frequently works in high, precarious places, in humid conditions (summer humidity, plant is not air conditioned), and is exposed to electrical shock (only authorized maintenance personnel are allowed access to electrical cabinets).
The noise level in the work environment is usually loud. Hearing protection is mandated.
American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.
If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:
.
Salary Description
$27.79-$28.62
