Dcs Corp Jobs in Usa
1,498 positions found — Page 86
D
Electronics Design Engineer
🏢 DCS Corp
Salary not disclosed
Salary Range: $82,004
- $111,000 Electronics Design Engineer We are seeking a talented and motivated Electrical Engineer with expertise in RF, hardware, and software design to join our dynamic team.
In this role, you will be at the forefront of designing and developing cutting-edge electrical equipment for a variety of applications, including commercial, industrial, military, and scientific projects.
If you are passionate about innovation and want to contribute to complex real-time systems, we encourage you to apply Essential Job Functions: Design and develop RF based Circuit Card Assemblies (CCAs) for RF applications.
Troubleshoot, maintain, upgrade and test CCAs.
Write and debug firmware for new products.
Integrate CCAs into VME backplane.
Design multi-layer CCAs using PCB design tools.
Integrate VME based CCAs into complex real time systems for RF simulation and modeling.
Test and troubleshoot electronic circuits.
Required Skills: Due to the sensitivity of customer related requirements, U.S.
citizenship is required.
Must be eligible to obtain and maintain a security clearance.
Must have a bachelor’s degree in an engineering discipline plus 5+ years of relevant experience Experience with designing new multi-layered Printed Circuit Boards (PCB)s Experience designing new electronic Circuit Card Assemblies (CCAs).
Experience with digital and analog circuit design.
Experience developing and working with VME based backplanes and PCBs Experience working with Real Time Embedded systems Desired Skills: Experience with FPGA/PLD design, digital signal processing.
Experience with board design to support RF analysis and modulation.
Design and development of RF based digital/analog HW and SW Experience working with the following tools: Mentor Graphics PADS, Cadence OrCAD PCB Designer Suite, MAX+PLUS II, Quartus Experience utilizing RF laboratory test equipment including signal generators, spectrum analyzers, power meters, and network analyzers.
- $111,000 Electronics Design Engineer We are seeking a talented and motivated Electrical Engineer with expertise in RF, hardware, and software design to join our dynamic team.
In this role, you will be at the forefront of designing and developing cutting-edge electrical equipment for a variety of applications, including commercial, industrial, military, and scientific projects.
If you are passionate about innovation and want to contribute to complex real-time systems, we encourage you to apply Essential Job Functions: Design and develop RF based Circuit Card Assemblies (CCAs) for RF applications.
Troubleshoot, maintain, upgrade and test CCAs.
Write and debug firmware for new products.
Integrate CCAs into VME backplane.
Design multi-layer CCAs using PCB design tools.
Integrate VME based CCAs into complex real time systems for RF simulation and modeling.
Test and troubleshoot electronic circuits.
Required Skills: Due to the sensitivity of customer related requirements, U.S.
citizenship is required.
Must be eligible to obtain and maintain a security clearance.
Must have a bachelor’s degree in an engineering discipline plus 5+ years of relevant experience Experience with designing new multi-layered Printed Circuit Boards (PCB)s Experience designing new electronic Circuit Card Assemblies (CCAs).
Experience with digital and analog circuit design.
Experience developing and working with VME based backplanes and PCBs Experience working with Real Time Embedded systems Desired Skills: Experience with FPGA/PLD design, digital signal processing.
Experience with board design to support RF analysis and modulation.
Design and development of RF based digital/analog HW and SW Experience working with the following tools: Mentor Graphics PADS, Cadence OrCAD PCB Designer Suite, MAX+PLUS II, Quartus Experience utilizing RF laboratory test equipment including signal generators, spectrum analyzers, power meters, and network analyzers.
Not Specified
D
Flight Dynamics Engineer
🏢 DCS Corp
Salary not disclosed
Salary Range: $94,306
- $150,000 Currently seeking a Systems Engineer to join our contractor/government team in support of US Navy Aircraft Safety Programs.
Essential Job Functions: The successful candidate will work with the engineering and test groups providing technical support including data analysis, system and software requirements, aircraft flight dynamics, and test & evaluation support.
Required Skills: Due to the sensitivity of customer related requirements, U.S.
Citizenship is required.
Bachelor's degree with a minimum of 5 years' experience in an engineering discipline is required.
An active Secret Security Clearance is required.
A working knowledge of military aircraft flight dynamics, NAVAIR system requirements and systems engineering processes.
Good written and verbal communication skills.
Desired Skills: Military piloting experience.
Aircraft simulator pilot.
BS degree in Aerospace Engineering.
- $150,000 Currently seeking a Systems Engineer to join our contractor/government team in support of US Navy Aircraft Safety Programs.
Essential Job Functions: The successful candidate will work with the engineering and test groups providing technical support including data analysis, system and software requirements, aircraft flight dynamics, and test & evaluation support.
Required Skills: Due to the sensitivity of customer related requirements, U.S.
Citizenship is required.
Bachelor's degree with a minimum of 5 years' experience in an engineering discipline is required.
An active Secret Security Clearance is required.
A working knowledge of military aircraft flight dynamics, NAVAIR system requirements and systems engineering processes.
Good written and verbal communication skills.
Desired Skills: Military piloting experience.
Aircraft simulator pilot.
BS degree in Aerospace Engineering.
Not Specified
D
Scheduler
🏢 DCS Corp
Salary not disclosed
The applicant shall assist product/project team(s) by developing, integrating, and presenting task-oriented activities in a comprehensive Integrated Master Schedule (IMS) using Microsoft Project and Milestone Professional.
The applicant shall develop a detailed IMS for all activities important to the teams’ success, and present IMS data in a clear and concise manner consistent with accepted schedule management techniques and processes.
Essential Job Functions: The applicant shall provide services to team leads with schedule status reviews and schedule update meetings.
The applicant shall perform IMS health checks and what-if analysis using Government-approved software at the request of USG team leads.
The applicant will present information related to the IMS during recurring meetings, and develop presentation slides and other materials as needed using Microsoft Office tools such as PowerPoint, Excel, Word, etc.
Required Skills: Due to the sensitivity of customer related requirements, U.S.
Citizenship is required.
Ability to obtain security clearance.
A Master's Degree in a specialized field
* plus a minimum of 6 years of applicable experience or, a Bachelor's Degree in the specialized field
* plus 8 years, or Associates Degree in the specialized field
* plus 10 years, or High School Diploma with 16 years of applicable experience or more years of scheduler experience with a minimum of two years in Major Defense Acquisition Program (MDAP) Acquisition Category (ACAT I/II) programs.
Specialized Degree Field: Project Management, Business Management/Administration or other related field.
Specialized/applicable experience must be in the area of Project Management, Business Management/Administration or other related field.
A minimum of 5 consecutive years, within the last 10 years, experience as a program scheduler developing and maintaining schedules of complex government or commercial engineering or technical programs (preferably ground combat vehicle systems experience).
Experience working on military acquisition programs.
A minimum of 5 years of experience utilizing project management/ scheduling tool software suites: Microsoft Project; or KIDASA Milestone Professional; or Oracle Primavera; or Barbecana Full Monte; and software using the Monte Carlo simulation tools (e.g.
@RISK).
Have regularly and on a recurring basis participated as an active member of a process team in the formulation of integrated project plans, and have been directly responsible for representing the activities and tasks of that plan in the form of an integrated schedule.
Shows wide-ranging past experience working with cross functional and with integrated process teams on complex activities; works well with groups.
Demonstrates an understanding of how to employ participatory leadership techniques and management fundamentals in the process of working with teams in the planning, development, and management of integrated, complex project schedules.
Can lead and manage a group when necessary.
Shows an ability to analyze technical requirements, budget and management timelines, mandatory processes and procedures, and leadership guidance, translate them into complex integrated project schedules.
Is able to apply fundamental and advanced project development techniques to the creation and formulation of complex integrated project schedules.
Grasps the essentials of schedule development and schedule management; demonstrates experience and competency in current schedule development (e.g.
Microsoft Project and PowerPoint/Excel), schedule logic (Defense Contract Management Agency 14-point evaluation and analysis techniques), and schedule analysis tools, techniques, and software to ensure the integrated schedules developed are complete, technically sound, and can be assessed for the impacts of possible changes to timing and task content.
Has familiarity with scheduling tools of the trade to include logic and analysis software.
Modeling techniques with respect to cost and schedule.
DoD Integrated Master Plan and Integrated Master Schedule Preparation and Use Guide; DI-MGMT-81650.
The applicant shall develop a detailed IMS for all activities important to the teams’ success, and present IMS data in a clear and concise manner consistent with accepted schedule management techniques and processes.
Essential Job Functions: The applicant shall provide services to team leads with schedule status reviews and schedule update meetings.
The applicant shall perform IMS health checks and what-if analysis using Government-approved software at the request of USG team leads.
The applicant will present information related to the IMS during recurring meetings, and develop presentation slides and other materials as needed using Microsoft Office tools such as PowerPoint, Excel, Word, etc.
Required Skills: Due to the sensitivity of customer related requirements, U.S.
Citizenship is required.
Ability to obtain security clearance.
A Master's Degree in a specialized field
* plus a minimum of 6 years of applicable experience or, a Bachelor's Degree in the specialized field
* plus 8 years, or Associates Degree in the specialized field
* plus 10 years, or High School Diploma with 16 years of applicable experience or more years of scheduler experience with a minimum of two years in Major Defense Acquisition Program (MDAP) Acquisition Category (ACAT I/II) programs.
Specialized Degree Field: Project Management, Business Management/Administration or other related field.
Specialized/applicable experience must be in the area of Project Management, Business Management/Administration or other related field.
A minimum of 5 consecutive years, within the last 10 years, experience as a program scheduler developing and maintaining schedules of complex government or commercial engineering or technical programs (preferably ground combat vehicle systems experience).
Experience working on military acquisition programs.
A minimum of 5 years of experience utilizing project management/ scheduling tool software suites: Microsoft Project; or KIDASA Milestone Professional; or Oracle Primavera; or Barbecana Full Monte; and software using the Monte Carlo simulation tools (e.g.
@RISK).
Have regularly and on a recurring basis participated as an active member of a process team in the formulation of integrated project plans, and have been directly responsible for representing the activities and tasks of that plan in the form of an integrated schedule.
Shows wide-ranging past experience working with cross functional and with integrated process teams on complex activities; works well with groups.
Demonstrates an understanding of how to employ participatory leadership techniques and management fundamentals in the process of working with teams in the planning, development, and management of integrated, complex project schedules.
Can lead and manage a group when necessary.
Shows an ability to analyze technical requirements, budget and management timelines, mandatory processes and procedures, and leadership guidance, translate them into complex integrated project schedules.
Is able to apply fundamental and advanced project development techniques to the creation and formulation of complex integrated project schedules.
Grasps the essentials of schedule development and schedule management; demonstrates experience and competency in current schedule development (e.g.
Microsoft Project and PowerPoint/Excel), schedule logic (Defense Contract Management Agency 14-point evaluation and analysis techniques), and schedule analysis tools, techniques, and software to ensure the integrated schedules developed are complete, technically sound, and can be assessed for the impacts of possible changes to timing and task content.
Has familiarity with scheduling tools of the trade to include logic and analysis software.
Modeling techniques with respect to cost and schedule.
DoD Integrated Master Plan and Integrated Master Schedule Preparation and Use Guide; DI-MGMT-81650.
Not Specified
M
VP Regional Distribution
Salary not disclosed
Job Summary We are seeking a Regional VP of Distribution to lead a multi-site distribution network across our Southeast region.
This role is designed for a leader of leaders—someone who thrives on coaching Directors, strengthening engagement, and building leadership capability across large, complex, and increasingly automated distribution centers.
Success in this role comes not only from day-to-day operational execution but also from how effectively you develop site leaders, inspire teams, and drive consistent process rigor, cultural development, and results across safety, quality, service, cost, and people.
This role may be based near our headquarters in Northfield, IL or anywhere within the Southeast region, with approximately 50% travel required.
Job Description MAJOR RESPONSIBILITIES: Monitor performance using key performance indicators including on time shipping performance, inventory adjustments, productivity, overtime, labor usage, etc.
Formulate and implement operational strategies and initiatives along with the Operations Leadership team.
Provide plan and direction to branches when acquiring new accounts.
Work with various corporate teams (such as Sales and Quality) to ensure the needs of all customers are met based on specifications.
Monitor customer concerns and OSI reports and address issues escalated above the Director of Operations.
Review safety and security procedures within the branches to ensure compliance with internal policies and Federal guidelines.
Audit local practices for compliance during visits and implement plans for improvement.
Ensure branches have the needed amount and type of capital equipment for efficient operations.
Work with appropriate teams to plan for future capital investment opportunities.
Monitor all human resource activity in assigned DCs ensuring compliance with Corporate and Operations HR policy.
Overall accountability for Employee Relations policy adherence and enforcement through assigned locations.
Ensure compliance to regulatory rules and guidelines as established by Corporate Quality.
Monitor the performance of Directors in related incentive programs.
Work closely with each Director to identify ways to achieving maximum performance and to improve performance against goals.
Management responsibilities include: Typically, manage through Directors.
Provide leadership and management to one or more major departments of an operating unit or to a department that has system-wide accountability.
Strategic, tactical and operational planning (24 + months) for the function or department; Direct budgetary responsibility for one or more departments, functions or major projects/programs; Interpret and execute policies for departments/projects and develops; Recommend and implement new policies or modifications to existing policies; Hiring staff, recommending pay increases, performing performance reviews, training and development of staff, estimating personnel needs, assigning work, meeting completion dates, interpreting and ensuring consistent application of organizational policies.
MINIMUM JOB REQUIREMENTS: Education: Bachelor’s degree.
Certification / Licensure None required.
Work Experience 10 years of experience in manufacturing and/or distribution environment with P&L responsibility.
At least 5 years of experience managing people, including hiring, developing, motivating and directing people as they work, at a Senior level.
Knowledge / Skills / Abilities Experience building and maintaining relationships within and between teams.
Experience influencing and motivating others to drive results in a multi-location and matrixed environment.
Position requires travel up to 50% of the time for business purposes (within state and out of state).
Position requires flexibility to meet with associates on all shifts.
PREFERRED JOB REQUIREMENTS Knowledge / Skills / Abilities Experience developing strategic initiatives which align with business goals and budget.
Experience managing multiple distribution sites.
Experience with WMS systems and Labor Management systems.
Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $234,000.00
- $351,000.00 Annual The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
This role is bonus and/or incentive eligible.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
This role is designed for a leader of leaders—someone who thrives on coaching Directors, strengthening engagement, and building leadership capability across large, complex, and increasingly automated distribution centers.
Success in this role comes not only from day-to-day operational execution but also from how effectively you develop site leaders, inspire teams, and drive consistent process rigor, cultural development, and results across safety, quality, service, cost, and people.
This role may be based near our headquarters in Northfield, IL or anywhere within the Southeast region, with approximately 50% travel required.
Job Description MAJOR RESPONSIBILITIES: Monitor performance using key performance indicators including on time shipping performance, inventory adjustments, productivity, overtime, labor usage, etc.
Formulate and implement operational strategies and initiatives along with the Operations Leadership team.
Provide plan and direction to branches when acquiring new accounts.
Work with various corporate teams (such as Sales and Quality) to ensure the needs of all customers are met based on specifications.
Monitor customer concerns and OSI reports and address issues escalated above the Director of Operations.
Review safety and security procedures within the branches to ensure compliance with internal policies and Federal guidelines.
Audit local practices for compliance during visits and implement plans for improvement.
Ensure branches have the needed amount and type of capital equipment for efficient operations.
Work with appropriate teams to plan for future capital investment opportunities.
Monitor all human resource activity in assigned DCs ensuring compliance with Corporate and Operations HR policy.
Overall accountability for Employee Relations policy adherence and enforcement through assigned locations.
Ensure compliance to regulatory rules and guidelines as established by Corporate Quality.
Monitor the performance of Directors in related incentive programs.
Work closely with each Director to identify ways to achieving maximum performance and to improve performance against goals.
Management responsibilities include: Typically, manage through Directors.
Provide leadership and management to one or more major departments of an operating unit or to a department that has system-wide accountability.
Strategic, tactical and operational planning (24 + months) for the function or department; Direct budgetary responsibility for one or more departments, functions or major projects/programs; Interpret and execute policies for departments/projects and develops; Recommend and implement new policies or modifications to existing policies; Hiring staff, recommending pay increases, performing performance reviews, training and development of staff, estimating personnel needs, assigning work, meeting completion dates, interpreting and ensuring consistent application of organizational policies.
MINIMUM JOB REQUIREMENTS: Education: Bachelor’s degree.
Certification / Licensure None required.
Work Experience 10 years of experience in manufacturing and/or distribution environment with P&L responsibility.
At least 5 years of experience managing people, including hiring, developing, motivating and directing people as they work, at a Senior level.
Knowledge / Skills / Abilities Experience building and maintaining relationships within and between teams.
Experience influencing and motivating others to drive results in a multi-location and matrixed environment.
Position requires travel up to 50% of the time for business purposes (within state and out of state).
Position requires flexibility to meet with associates on all shifts.
PREFERRED JOB REQUIREMENTS Knowledge / Skills / Abilities Experience developing strategic initiatives which align with business goals and budget.
Experience managing multiple distribution sites.
Experience with WMS systems and Labor Management systems.
Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $234,000.00
- $351,000.00 Annual The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
This role is bonus and/or incentive eligible.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Not Specified
D
Avionics Systems Engineer
🏢 DCS Corp
Salary not disclosed
Salary: $87,934
- $140,000 Lead a dynamic team of software and hardware engineers integrating safety critical systems into Navy aircraft.
Essential Job Functions: Work independently on smaller projects while directing the efforts of larger teams on multiple simultaneous projects integrating safety critical systems into Navy aircraft.
Required Skills: Due to the sensitivity of customer related requirements, U.S.
Citizenship is required.
A Bachelor's degree in an Engineering discipline plus 8 years of experience is required.
Active Secret clearance.
At least 3 years of experience integrating avionics systems into DoD aircraft, preferably USN.
Familiarity with NAVAIR systems engineering processes.
Desired Skills: Master's Degree in any engineering discipline.
Experience with NAVAIR systems engineering technical review processes.
- $140,000 Lead a dynamic team of software and hardware engineers integrating safety critical systems into Navy aircraft.
Essential Job Functions: Work independently on smaller projects while directing the efforts of larger teams on multiple simultaneous projects integrating safety critical systems into Navy aircraft.
Required Skills: Due to the sensitivity of customer related requirements, U.S.
Citizenship is required.
A Bachelor's degree in an Engineering discipline plus 8 years of experience is required.
Active Secret clearance.
At least 3 years of experience integrating avionics systems into DoD aircraft, preferably USN.
Familiarity with NAVAIR systems engineering processes.
Desired Skills: Master's Degree in any engineering discipline.
Experience with NAVAIR systems engineering technical review processes.
Not Specified
D
System Administrator (F-35)
🏢 DCS Corp
Salary not disclosed
Salary Range: $70,310
- $91,000 The candidate will serve as a System Administrator for the F-35 Integrated Product Team (IPT).
The candidate will ensure the confidentiality, integrity, and availability of systems, networks, and data through the planning, analysis, development, implementation, maintenance, and enhancement of information systems security programs, policies, procedures, and tools.
This candidate will be expected to attend relevant trainings, workshops and follow instruction from IT Operations Lead and Senior System Administrators.
Essential Job Functions Monitor information systems and user compliance with cybersecurity policy, as appropriate, and review the results of such monitoring.
Ensure that any cybersecurity inspections, tests, and reviews are synchronized and coordinated with affected parties and organizations.
Ensure implementation of IS security measures and procedures, including reporting incidents to the ISSM or CISSM, Authorizing Official (AO) and appropriate reporting chains and coordinating system-level responses to unauthorized disclosures.
Promoting awareness of security issues among management and ensuring sound security principles are reflected in organizations' visions and goals.
Developing and implementing programs to ensure that systems, network, and data users are aware of, understand, and adhere to systems security policies and procedures.
Participating in network and systems design to ensure implementation of appropriate systems security policies.
Assessing security events to determine impact and implementing corrective actions.
Monitor system recovery processes to ensure security features and procedures are properly restored and functioning correctly.
Communicate and collaborate with the IT Operations Lead and Senior System Administrators in areas of mutual interest and impact.
Assist with the analysis of customer information systems for risk to the organization.
Assist with Monitoring information systems and user compliance with cybersecurity policy, as appropriate, and review the results of such monitor.
Assist with Ensuring that any cybersecurity inspections, tests, and reviews are synchronized and coordinated with affected parties and organizations.
Required Skills: Due to the sensitivity of customer related requirements, U.S.
Citizenship is required.
Bachelor's degree in an IT field with 5+ years of experience.
High school diploma/GED plus 13+ years of experience, or Associate's-level (AA/AS/Technical school) plus 7+ years of experience.
Must a Windows 10, Linux, RHEL 7/8/9 Operating system certification.
Experience with DISA security tools, experience implementing NIST 800-53 or JSIG security controls.
Experience with MSSQL 2014/2016/2017/2019.
Must have an active security clearance and maintain one for the duration of employment.
Must be able to work onsite
- This position is not remote work eligible.
Must have a Windows, Linux and or Red hat Operating System and Security+ certifications to comply with DoD 8140.
Must be willing and able to work after hours/weekend support for patching and maintenance as needed.
Possess professionalism, courtesy, high moral character, and integrity.
Excellent communication skills and able to liaison with outside agencies and ability to work independently.
Must have experience design and configure workstations, servers, Network Attached Storage (NAS) or network devices.
Provides IT guidance to team members, can accept ambiguously defined tasking and create plans and execute work independently.
Collaborates with stakeholders to identify, define, and document program needs and objectives, operational procedures, problems, input and output requirements, and levels of systems access.
Integrates DOD cybersecurity policies and guidelines during the development of cybersecurity frameworks supporting mission efforts.
Utilizes Agile/Agile Kanban methodologies to develop formal project documentation.
The candidate will be expected to assist during the integration of multiple organizations.
Routinely ensures comprehensive cybersecurity measures are implemented, followed, and recorded in a timely and accurate manner.
To include but not limited to; provides security scans, SCAP, implements STIGS & eSTIGS conducts vulnerability assessments etc.
The candidate will be expected to configure systems to always maintain cybersecurity defense.
Accurately assesses pertinent issues found during the periodic review of cybersecurity posture.
Ability to apply DOD cyber operations experience and knowledge in supporting mission operations.
The candidate will be expected to assist in the design of new techniques to support the organization in development, implementation and maintenance of National, DOD, and DON security systems.
- $91,000 The candidate will serve as a System Administrator for the F-35 Integrated Product Team (IPT).
The candidate will ensure the confidentiality, integrity, and availability of systems, networks, and data through the planning, analysis, development, implementation, maintenance, and enhancement of information systems security programs, policies, procedures, and tools.
This candidate will be expected to attend relevant trainings, workshops and follow instruction from IT Operations Lead and Senior System Administrators.
Essential Job Functions Monitor information systems and user compliance with cybersecurity policy, as appropriate, and review the results of such monitoring.
Ensure that any cybersecurity inspections, tests, and reviews are synchronized and coordinated with affected parties and organizations.
Ensure implementation of IS security measures and procedures, including reporting incidents to the ISSM or CISSM, Authorizing Official (AO) and appropriate reporting chains and coordinating system-level responses to unauthorized disclosures.
Promoting awareness of security issues among management and ensuring sound security principles are reflected in organizations' visions and goals.
Developing and implementing programs to ensure that systems, network, and data users are aware of, understand, and adhere to systems security policies and procedures.
Participating in network and systems design to ensure implementation of appropriate systems security policies.
Assessing security events to determine impact and implementing corrective actions.
Monitor system recovery processes to ensure security features and procedures are properly restored and functioning correctly.
Communicate and collaborate with the IT Operations Lead and Senior System Administrators in areas of mutual interest and impact.
Assist with the analysis of customer information systems for risk to the organization.
Assist with Monitoring information systems and user compliance with cybersecurity policy, as appropriate, and review the results of such monitor.
Assist with Ensuring that any cybersecurity inspections, tests, and reviews are synchronized and coordinated with affected parties and organizations.
Required Skills: Due to the sensitivity of customer related requirements, U.S.
Citizenship is required.
Bachelor's degree in an IT field with 5+ years of experience.
High school diploma/GED plus 13+ years of experience, or Associate's-level (AA/AS/Technical school) plus 7+ years of experience.
Must a Windows 10, Linux, RHEL 7/8/9 Operating system certification.
Experience with DISA security tools, experience implementing NIST 800-53 or JSIG security controls.
Experience with MSSQL 2014/2016/2017/2019.
Must have an active security clearance and maintain one for the duration of employment.
Must be able to work onsite
- This position is not remote work eligible.
Must have a Windows, Linux and or Red hat Operating System and Security+ certifications to comply with DoD 8140.
Must be willing and able to work after hours/weekend support for patching and maintenance as needed.
Possess professionalism, courtesy, high moral character, and integrity.
Excellent communication skills and able to liaison with outside agencies and ability to work independently.
Must have experience design and configure workstations, servers, Network Attached Storage (NAS) or network devices.
Provides IT guidance to team members, can accept ambiguously defined tasking and create plans and execute work independently.
Collaborates with stakeholders to identify, define, and document program needs and objectives, operational procedures, problems, input and output requirements, and levels of systems access.
Integrates DOD cybersecurity policies and guidelines during the development of cybersecurity frameworks supporting mission efforts.
Utilizes Agile/Agile Kanban methodologies to develop formal project documentation.
The candidate will be expected to assist during the integration of multiple organizations.
Routinely ensures comprehensive cybersecurity measures are implemented, followed, and recorded in a timely and accurate manner.
To include but not limited to; provides security scans, SCAP, implements STIGS & eSTIGS conducts vulnerability assessments etc.
The candidate will be expected to configure systems to always maintain cybersecurity defense.
Accurately assesses pertinent issues found during the periodic review of cybersecurity posture.
Ability to apply DOD cyber operations experience and knowledge in supporting mission operations.
The candidate will be expected to assist in the design of new techniques to support the organization in development, implementation and maintenance of National, DOD, and DON security systems.
Not Specified
D
Joint Mission Planning System Engineer
🏢 DCS Corp
Salary not disclosed
Salary Range: $107,934
- $115,500 As the Joint Mission Planning Systems- Systems Engineer, you will coordinate and perform Mission Systems (MS) team integration activities for the F/A-18 & EA-18G aircraft USN and FMS variants.
Perform as the F/A-18 & EA-18G IPT primary contact point with contractors, program managers, and sponsors for MS team projects involving the Joint Mission Planning System (JMPS).
Essential Job Functions: Independently interface with all levels of the F/A-18 IPT as well as external organizations (e.g.
Program Office, Aircraft PMAs, NAVAIR, Boeing, Raytheon, etc.) on matters related to JMPS integration, project planning, scheduling, document preparation, engineering document assessment and integration planning.
Obtain and maintain adequate qualifications with current standards, procedures and schedules.
Develop plans and make written and oral presentations to contractors, sponsors, and IPT management on program status, technical problems, scheduling, and costs.
Provide technically sound advice and guidance to managers, supervisors, peers, and sponsors on specific technical aspects of JMPS.
Perform as an Initiative Architect (IA) for aircraft software changes involving JMPS and associated subsystems installed on the F/A-18 & EA-18G platforms and develop integrated breakdown structure (IBS) plans and asset requirement plans encompassing the development and verification phases of developmental software.
Provide engineering analysis, recommendations and solutions for complex challenges during system design and anomaly corrections.
Ensure that required documentation (detailed procedures, etc.) is developed for all tests and is in accordance with current standards, procedures and schedules.
Required Skills: Due to the sensitivity of customer related requirements, U.S.
Citizenship is required.
Must have a Bachelor's degree with 8 plus years of related experience.
Will also consider a Master's degree with 6 plus years of related experience.
Must be able to work onsite
- This position is not remote work eligible.
Must be able to obtain and maintain a Top Secret clearance.
Travel may be required.
Desired Skills: Experience with F/A-18 or EA-18G aircraft platforms a plus.
Familiarization with Mission Planning is a plus.
- $115,500 As the Joint Mission Planning Systems- Systems Engineer, you will coordinate and perform Mission Systems (MS) team integration activities for the F/A-18 & EA-18G aircraft USN and FMS variants.
Perform as the F/A-18 & EA-18G IPT primary contact point with contractors, program managers, and sponsors for MS team projects involving the Joint Mission Planning System (JMPS).
Essential Job Functions: Independently interface with all levels of the F/A-18 IPT as well as external organizations (e.g.
Program Office, Aircraft PMAs, NAVAIR, Boeing, Raytheon, etc.) on matters related to JMPS integration, project planning, scheduling, document preparation, engineering document assessment and integration planning.
Obtain and maintain adequate qualifications with current standards, procedures and schedules.
Develop plans and make written and oral presentations to contractors, sponsors, and IPT management on program status, technical problems, scheduling, and costs.
Provide technically sound advice and guidance to managers, supervisors, peers, and sponsors on specific technical aspects of JMPS.
Perform as an Initiative Architect (IA) for aircraft software changes involving JMPS and associated subsystems installed on the F/A-18 & EA-18G platforms and develop integrated breakdown structure (IBS) plans and asset requirement plans encompassing the development and verification phases of developmental software.
Provide engineering analysis, recommendations and solutions for complex challenges during system design and anomaly corrections.
Ensure that required documentation (detailed procedures, etc.) is developed for all tests and is in accordance with current standards, procedures and schedules.
Required Skills: Due to the sensitivity of customer related requirements, U.S.
Citizenship is required.
Must have a Bachelor's degree with 8 plus years of related experience.
Will also consider a Master's degree with 6 plus years of related experience.
Must be able to work onsite
- This position is not remote work eligible.
Must be able to obtain and maintain a Top Secret clearance.
Travel may be required.
Desired Skills: Experience with F/A-18 or EA-18G aircraft platforms a plus.
Familiarization with Mission Planning is a plus.
Not Specified
D
B-52 Senior Program Manager (Dayton OH)
🏢 DCS Corp
Salary not disclosed
In this position you will provide full-spectrum Acquisition Program Management Support to the US Air Force B-52 systems acquisition programs within the Bombers Directorate, Air Force Life Cycle Management Center (AFLCMC) at Wright-Patterson AFB in Dayton, Ohio.
The job will be a combination of Teleworking and in-office support (Hybrid position).
Essential Job Functions: Apply the full range of acquisition program management principles, policies, and procedures to perform a wide range of acquisition management activities to include pre- and post-contract award and milestone reviews in support of the existing and future B-52 programs.
Assist in the identification of requirements to support the acquisition, sustainment and supportability improvements required from program initiation through initial operational capability and continued sustainment to bed down of the weapon system.
Support management of the acquisition and modifications thereof as well as all associated requirements as they pertain to other functional areas including logistics, contracting, engineering, finance, and configuration management.
Apply the principles, criteria, and procedures of the DoD to include DoD 5000.01 and DoD 5000.02 as well as the policies and processes of USAF, AFMC, AFLCMC, Bombers Directorate, through the B-52 Division level to all tasks.
Required Skills: Due to the sensitivity of customer related requirements, U.S.
Citizenship is required.
A minimum of a Bachelor’s degree plus 15 years of relevant experience is required.
Requires a Secret security clearance on the first day of employment.
Of the total relevant experience, a minimum of 5 years managing programs in a DoD acquisition environment.
The job will be a combination of Teleworking and in-office support (Hybrid position).
Essential Job Functions: Apply the full range of acquisition program management principles, policies, and procedures to perform a wide range of acquisition management activities to include pre- and post-contract award and milestone reviews in support of the existing and future B-52 programs.
Assist in the identification of requirements to support the acquisition, sustainment and supportability improvements required from program initiation through initial operational capability and continued sustainment to bed down of the weapon system.
Support management of the acquisition and modifications thereof as well as all associated requirements as they pertain to other functional areas including logistics, contracting, engineering, finance, and configuration management.
Apply the principles, criteria, and procedures of the DoD to include DoD 5000.01 and DoD 5000.02 as well as the policies and processes of USAF, AFMC, AFLCMC, Bombers Directorate, through the B-52 Division level to all tasks.
Required Skills: Due to the sensitivity of customer related requirements, U.S.
Citizenship is required.
A minimum of a Bachelor’s degree plus 15 years of relevant experience is required.
Requires a Secret security clearance on the first day of employment.
Of the total relevant experience, a minimum of 5 years managing programs in a DoD acquisition environment.
Not Specified
T
Family Case Manager
Salary not disclosed
The Case Manager provides comprehensive, client-centered services to families involved in the child welfare and/or White County Family Treatment Court (WCFTC) system. This position focuses on assessment, service coordination, crisis intervention, and ongoing case monitoring to promote family stability, safety, and self-sufficiency.
Duties include, but are not limited to, the following:
- Complete comprehensive screenings and client assessments to identify strengths, needs, and service priorities.
- Develop, implement, and monitor individualized treatment plans and wrap-around service plans for families.
- Provide intensive case management services, including regular home visits and community-based support.
- Connect participants to community resources such as mental health, medical, substance use treatment providers, housing services, and other support systems.
- Monitor participant compliance with service plans, court requirements, and child welfare case plans.
- Assist families in navigating Department of Children’s Services (DCS) requirements and court expectations.
- Attend and actively participate in DCS and Family Treatment Court hearings, staffings, and team meetings.
- Collaborate with FTC team members, DCS staff, treatment providers, DHS/TANF case managers, and other community partners.
- Provide crisis intervention and short-term supportive counseling as needed.
- Offer educational resources and skill-building support to strengthen family functioning and stability.
- Conduct and monitor drug screenings in accordance with program requirements.
- Maintain accurate and timely client documentation, charts, and case notes.
- Enter required data into the state database and other reporting systems.
- Assist clients with completing disability paperwork and other benefit-related documentation when necessary.
- Maintain ongoing communication with supervisors and funding partners, including FFS Supervisors and DHS TANF Case Managers.
MINIMUM QUALIFICATIONS
- Bachelor’s degree in social services from an accredited college or university; in some cases, relevant work experience may substitute for education.
- 1–2 years of related work experience in case management, social work, or human services.
- Valid driver’s license and reliable transportation.
- Must authorize the release of investigative and criminal records from the FBI and Tennessee Bureau of Investigation to the Tennessee Community Services Agency.
Join our team and make a difference in the lives of those in need!
Job Type: Full-time
Benefits:
- Dental insurance
- Employee assistance program
- Flexible schedule
- Health insurance
- Life insurance
- Paid time off
- Retirement plan
- Vision insurance
Not Specified
P
Consulting Systems Engineer
Salary not disclosed
Consulting Systems Engineer (Primetals Technologies USA LLC) – Alpharetta, GA Duties: Executes the design of complex Drive systems (Variable Frequency Drives) that integrate hardware and software.
Completes complex material specification, schematic preparation and appropriate follow-up.
Makes recommendations for ideas related to productivity improvement, cost reduction and improvement in customer satisfaction.
Performs complex technical interchange and knowledge transfer for both processes and application of products to system design.
Performs full range of standard work for the professional field.
Applies advanced skills to resolve complex problems not covered by existing procedures or practices independently.
Identifies and resolves more complex problems and applies problem-solving skills in order to deal with most situations.
Demonstrates and applies a broad knowledge of field of specialization (Drive Systems) through successful completion of moderately complex assignments.
Successfully applies complex knowledge of fundamental concepts, practices, and procedures of particular area of specialization (Drive Systems).
Demonstrates knowledge of organization's business practices and issues.
Primary work location in Alpharetta, GA.
Travel required approximately 60% to various client sites throughout the US.
International travel possible.
Minimum education and experience required: Bachelor’s degree or the equivalent in Mechatronic Engineering, Electrical Engineering, or related field and 5 years of experience in drive engineering and commissioning in metals industry environment or related experience; OR Master’s degree or the equivalent in Mechatronic Engineering, Electrical Engineering or related field and 2 years of experience in drive engineering and commissioning in metals industry environment or related experience Skills Required: Must have experience with: Drive Engineering with state-of-the-art Variable Frequency Drives like Siemens S120 Drives, Siemens 6RA80 Drives, ABB ACS 880 Drives, ABB DCS 880 Drives or similar; Drive Commissioning with state-of-the-art Variable Frequency Drives like Siemens S120 Drives, Siemens 6RA80 Drives, ABB ACS 880 Drives, ABB DCS 880 Drives or similar; Creating and analyzing electrical schematics for Variable Frequency Drives and checking for correctness; Experience with Drive Engineering and Commissioning in the Metals Industry (especially Steel and Aluminum); Understanding of Physics regarding Variable Frequency Drives and Motors (especially Induction motors, DC-Motors and/or Synchronous Motors); Engineering and Commissioning of medium voltage Variable Frequency Drives.
Employer will accept any amount of experience with the required skills.
For detailed job requirements and to apply for this position visit our website at and apply to the following Job ID number 6553
Completes complex material specification, schematic preparation and appropriate follow-up.
Makes recommendations for ideas related to productivity improvement, cost reduction and improvement in customer satisfaction.
Performs complex technical interchange and knowledge transfer for both processes and application of products to system design.
Performs full range of standard work for the professional field.
Applies advanced skills to resolve complex problems not covered by existing procedures or practices independently.
Identifies and resolves more complex problems and applies problem-solving skills in order to deal with most situations.
Demonstrates and applies a broad knowledge of field of specialization (Drive Systems) through successful completion of moderately complex assignments.
Successfully applies complex knowledge of fundamental concepts, practices, and procedures of particular area of specialization (Drive Systems).
Demonstrates knowledge of organization's business practices and issues.
Primary work location in Alpharetta, GA.
Travel required approximately 60% to various client sites throughout the US.
International travel possible.
Minimum education and experience required: Bachelor’s degree or the equivalent in Mechatronic Engineering, Electrical Engineering, or related field and 5 years of experience in drive engineering and commissioning in metals industry environment or related experience; OR Master’s degree or the equivalent in Mechatronic Engineering, Electrical Engineering or related field and 2 years of experience in drive engineering and commissioning in metals industry environment or related experience Skills Required: Must have experience with: Drive Engineering with state-of-the-art Variable Frequency Drives like Siemens S120 Drives, Siemens 6RA80 Drives, ABB ACS 880 Drives, ABB DCS 880 Drives or similar; Drive Commissioning with state-of-the-art Variable Frequency Drives like Siemens S120 Drives, Siemens 6RA80 Drives, ABB ACS 880 Drives, ABB DCS 880 Drives or similar; Creating and analyzing electrical schematics for Variable Frequency Drives and checking for correctness; Experience with Drive Engineering and Commissioning in the Metals Industry (especially Steel and Aluminum); Understanding of Physics regarding Variable Frequency Drives and Motors (especially Induction motors, DC-Motors and/or Synchronous Motors); Engineering and Commissioning of medium voltage Variable Frequency Drives.
Employer will accept any amount of experience with the required skills.
For detailed job requirements and to apply for this position visit our website at and apply to the following Job ID number 6553
Not Specified
jobs by
✓ All jobs loaded