Critchfield Mechanical Inc Jobs in Usa
4,328 positions found
Electro-Mechanical Assembly Technician
San Diego, CA (Onsite)
Direct Hire
This position pays between $65K - $75 K Per Year
JOB DESCRIPTION
- Physically build deliverable sensor systems: assemble mechanical components, solder electronic components, apply coatings to printed circuit boards, install printed circuit boards into sensor housings, precisely cut and strip wiring, mount fasteners, fasten and/or seal electro-mechanical assemblies by applying various bonding and/or sealing agents
- Perform final machining, cutting, or bonding operations on components such as sensor housing, sense elements, fine wires, etc.
- Assemble wiring harnesses and terminate connectors
- Assemble circuit boards, connectors, ribbon cables, jumpers, and other electronic components into custom-built enclosures
- Test sensors and printed circuit boards using a combination of electrical test equipment and LabVIEW-based software scripts
- Participate actively in inventory management and quarterly inventory checks
- Conduct final assembly of sensor systems onto customer driveshafts, including application of sealant, ensuring integrity of the full assembly, and certifying system fitness for homologation
- Participate in failure analyses by dissecting and analyzing hardware returned from the field, conducting diagnostic and validation testing, and comparing with original results.
- Assist in writing and issuing detailed reports outlining findings
Skill Requirements
- At least 2 years of full-time work experience in a related role
- Attention to detail and good craftsmanship, and a strong concern for quality
- Strong electrical and mechanical assembly skills
- Familiarity with wiring harness assembly protocols using AWG 20-gauge harnesses or smaller
- Familiarity with processing adhesives, soldering, and general machine shop skills
- Proficiency with LabVIEW or equivalent software
- Ability to read and interpret mechanical drawings and electrical schematics
- Understanding and knowledge of sensor or instrumentation calibration protocols
- the candidate is expected to already have a hands-on approach and a certain comfort level building and operating devices and instrumentation.
- Educational Requirements An Associate’s degree in fields such as machining, mechanical technology, electronics, automotive technology, or electronics is preferred but not required.
Applicants should apply via The Mice Groups Inc. website ( ) or through this careers site posting.
We are an equal opportunity employer and value diversity at The Mice Groups Inc. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.
Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records.
Pursuant to the Los Angeles Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records.
The Mice Groups Inc. values your privacy. Please consult our Candidate Privacy Notice, for information about how we collect, use, and disclose personal information of our candidates.
Privacy Policy
One of the basic principles The Mice Groups follows in designing and operating this website is that we ask for only the information we need to provide the service you’ve requested.
The Mice Groups does not currently collect personal identifying information via its website except (i) to the extent that you provide this information in an online job application and (ii) to the extent that your web browser provides personal identifying information.
The Mice Groups will use your personally identifying information solely for the purpose for which you submitted the information. The Mice Groups may, however, aggregate certain elements of your personal identifying information with the information of other users of our website to analyze the usefulness and popularity of various web pages on its website.
The Mice Groups reserves the right to change this policy at any time by posting a new privacy policy at this location. Questions regarding this statement should be directed to
When military bases, national security agencies, federal buildings, healthcare facilities, and leading commercial clients in Washington D.C and across the nation need superior facility support services, we answer the call. We offer a unique combination of government experience and facilities expertise that has helped us earn a position as one of the countrys leading integrated service providers.
About Us: EMCOR Government Services offers an experienced single-source solution for meeting the routine and mission-critical needs of federal, state, local and other government organizations. By combining our strong leaders with our expert professional technicians, commercial best practices, extensive facilities knowledge, and strong commitment to reliable, responsive service, we enable our government clients to achieve consistently high-performance facilities, on-time projects and long-term value.
Job Title: Lead Mechanical Engineer
Job Summary: EMCOR Government Services is seeking a Lead Mechanical Engineer (ME) to serve as the Subject Matter Expert (SME) for all mechanical systems supporting a major customer in the intelligence community located in Springfield, Virginia. The Lead ME is a key member of a team of dedicated and talented professionals in delivering a wide range of base operations support services - such as installation and facility operations, maintenance and repair; workforce and security support; logistics support; and, project management, as well as others - for a 2.5 million square foo state of the art headquarters building, adjacent customer buildings and over 100 small satellite sites located located throughout the Washington National Capitol Region (NCR).
*** This position is contingent upon contract award. ***
Essential Duties and Responsibilities include, but are not limited to:
- Serves as the principal manager responsible for the overall management and operation of the mechanical systems in support of of BOS
- Advises mechanical technicians in troubleshooting and resolving mechanical system malfunctions.
- Develops, implements and regularly reviews all mechanical systems and components preventative maintenance plans to ensure they are compliant with Original Equipment Manufacturer (OEM) standards.
- Performs overall capacity management of mechanical systems to ensure capability is in balance with known and/or future demand requirements.
- Maintains building calculations to manage supply available with required loads.
- Ensures building modifications comply with all code requirements and original design intent.
- Oversees the proper and timely application of Government and local regulations, codes, standards, policies and procedures related to mechanical systems operations and management.
- Working closely with the client, gains an understanding of their needs and requirements and communicates them and the appropriate performance standards to the contract staff and supporting vendors.
- Establishes and maintains an effective relationship with the customer in order to achieve a mutually beneficial business relationship.
- Devises ways to improve the full spectrum of the mechanical systems operations and services service delivery process to ensure high-quality goods and services are delivered on time and within cost.
- Keeps accurate documentation and when necessary, performs analysis of activities and processes to improve contract performance.
- Pro-actively seeks feedback from clients, attends meetings, submits reports, and assists both internal and external auditors and inspectors.
Security Clearance Requirement: This position requires an Active Top Secret/Sensitive Compartmented Information (TS/SCI) Clearance
Qualifications
- Currently licensed as a Mechanical Professional Engineer (PE) in one of the 50 U.S. states, U.S. Territories or Possessions.
- A bachelors degree from an accredited university in Facility Management, Construction Management, Engineering (Mechanical, Civil, Electrical, Structural), or another related field. A degree in Mechanical Engineering is preferred.
- At least 7 years of experience managing and operating facilities and systems of similar size, scope and complexity
- Strong technical knowledge of all facilities maintenance and operations, including complex mechanical, electrical and plumbing systems, structural systems, vertical transportation and data center operations.
- Highly developed leadership, management, supervisory, interpersonal, analytical and communication (oral and written) skills.
- Demonstrated ability to lead in a diverse and dynamic environment with short notice taskings and under high-pressure situations.
- Demonstrated knowledge and experience of building management systems such as Computerized Maintenance Management Systems (CMMS0 Building Automation Systems ( BAS) and Electrical Power Monitoring Systems ( EPMS) - individual certifications are highly desired
- Demonstrated knowledge and experience with Reliability- Centered Maintenance is a plus
- Industry recognized certification in Program and/or Project or Facility Management (e.g. Project Management Professional (PMP), Program Management Professional (PgMP), Certified Facility Manager (CFM), etc.) is desired.
As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled
Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies . Please check our available positions to confirm that a post or email is genuine.
EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCORs normal application process it is probably fraudulent.
#EGS
#LI-NS1
As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled
Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies . Please check our available positions to confirm that a post or email is genuine.
EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCORs normal application process it is probably fraudulent.
This role is ideal for individuals with experience of soldering printed circuit boards and working in a production environment.
Responsibilities • Hand-solder components to printed circuit boards (PCBs) following IPC-A-610 standards • Lead-form components for PCB assembly • Solder through-hole and SMT components • Operate selective solder machines • Inspect work visually to ensure quality standards • Repair soldering defects when needed • Follow safety procedures and maintain a clean work area • Document production totals and report errors • Perform machine startup, loading programs, and general equipment cleaning • Complete additional production tasks as assigned Required Skills • Ability to follow instructions and read equipment manuals • Experience using hand tools and reading blueprints • Strong attention to detail and organizational skills • Ability to communicate effectively and understand instructions • Strong time management skills • Minimum 1 years of soldering experience in a manufacturing environment Preferred Qualifications • Electro-Mechanical Assembly & Test experience • IPC-A-610 Certification 16.00-18.00/hr DOE Monday – Friday 6:00 AM – 2:30 PM (First Day Start Time: 7:00 AM (Orientation & Training) Wood Dale, IL Please send resumes to All employees of Elite Staffing must be 18 years or older and authorized to work in the United States.
Elite Staffing, Inc.
is proud to be an equal opportunity employer.
Our policy of equal employment opportunity is to recruit, hire, train and promote persons without regard to race, color, religion, national origin, sex, age, disability, handicap or any other protected status.
Elite Staffing offers the following benefit programs for your participation: Medical, Dental, Vision, Voluntary Benefits, 401k Retirement Plan, and Commuter benefits.
Our hiring process may include the use of artificial intelligence (AI) to assist in recruiting candidates.
AI may be used to collect information and grade, rank, or score your answers.
All employment decisions are made by human reviewers.
By submitting your application, you authorize Elite Staffing, Inc.
to contact you using the contact information you have provided for employment-related activities via any method, including SMS, email, and phone calls, including through the use of automated technology, AI generative voice, and pre-recorded and/or artificial voice messages.
For accommodations or to opt out of AI-assisted communication, you may unsubscribe from any SMS message and/or inform the AI technology of your request to opt out of AI-assisted communications.
All personal information provided will be handled in accordance with our Privacy Policy found on our website.
All employees of Elite Staffing must be 18 years or older and authorized to work in the United States.
Elite Staffing, Inc.
is proud to be an equal opportunity employer.
Our policy of equal employment opportunity is to recruit, hire, train and promote persons without regard to race, color, religion, national origin, sex, age, disability, handicap or any other protected status.CB3
***THIS JOB IS ONSITE IN TAYLOR, TX***
-CANDIDATES WILLING TO RELOCATE ARE WELCOME-
Classification Levels
Mechanical Project Coordinator II 4-6yrs experience
Mechanical Project Coordinator III 7-10yrs experience
Mechanical Project Coordinator IIII 10+yrs experience
Job Description
MRI Inc. is seeking a Mechanical Project Coordinator II, III & IIII who will be in charge of managing administrative and organizational duties and acting as a point of contact between SAS and on-site contractors to ensure the project operates smoothly. Preferably, PCs should possess expertise in the specific areas they are assigned to oversee, to ensure effectiveness and clarity.
In this role you will:
- Bridge the gap between field operations and SAS Management.
- Minor administrative duties as defined by SAS.
- Develop and maintain a project communication plan.
- Coordinating meetings, including scheduling, sending invitations, and preparing agendas to maintain alignment between SAS and Contractors.
- Managing field-level project documentation, ensuring all forms and reports are accurately executed, correctly filed, and accessible.
- Promoting and maintaining a team atmosphere between SAS, coordinators, tool engineers, project managers, contractors, and vendors.
- Ensure timely progress reporting, providing stakeholders with accurate project status updates.
- Overseeing and managing the day-to-day field-level operational tasks and conflict resolution.
- Promptly taking ownership of delegated or observed issues and escalating them to the relevant Stakeholders.
- Monitor and maintain Daily Reporting (DR), Pre-Task Plans (PTPs), Site Risk Analysis (SRAs), and other relevant documentation ensuring both timely and accurate execution.
- Resolve field-level SOR quantity survey disputes, if required.
- Maintaining stop-work authority by investigating and stopping work when unsafe conditions are identified.
- Conduct spot compliance audits as directed by SAS.
- Incident documentation and investigation.
- Document and engage with SAS for lessons learned.
Requirements
- Journeyman license is preferred, but relevant certifications may be accepted at SAS’ discretion.
- Experience with semiconductor or related construction industries is preferred, but knowledge of applicable construction codes and installation best practices for MEP trades is mandatory.
- Bachelor's degree in construction management, engineering, or a related field experience is preferred.
- Minimum of 4+ years of experience in construction project coordination or management, must be knowledgeable and up to date with applicable construction codes regarding installation ‘best practices’ for MEP trades.
- Proven track record of successful projects completed.
- Similar project experience in Semiconductor, Advanced Technology, or Industrial projects.
- Excellent communication and organization skills.
- Journeyman level in Piping/Mechanical preferred
- Proficient in Microsoft Office Suite and related construction management software.
Title: Equipment Installation Mechanical Technician IV - 3 Openings
Location: Newton, NC
Duration: 12 Months
Hours: Monday - Friday 8 AM - 5 PM, Occasional OT
Travel Requirements: Project locations will range from Newton, NC and Hickory, NC
Only W2 candidates are eligible for this position. Third-party or C2C candidates will not be considered.
Scope of Position:
The Lead Equipment Installation Mechanical Technician is a senior-level technical role responsible for leading and executing complex mechanical equipment installations. This position provides on-site leadership, technical expertise, and coordination for installation projects, ensuring work is completed safely, on schedule, and in compliance with engineering specifications, quality standards, and customer requirements. The Lead Technician serves as a subject matter expert and mentor to junior technicians.
• This position is in the Engineering Project and is focused on capacity additions and the associated line installations & debug from a mechanical perspective.
• Lead and/or participate on manufacturing engineering projects and lead/support teams for the purposes of capacity installations, equipment debug, and preparing line/associated parts for Operations Receivership.
• As a leading team member, provide advanced mechanical discipline to proactively identify technical problems through root cause understanding coupled with robust industrialized solutions relative to line debug and installs.
• Leverage knowledge of mechanical and electrical engineering, machining & designing processes to improve performance of equipment/manufacturing process.
• Lead/support the development and execution of project plans to deliver timely error-free mechanical support for multi-line equipment installations
• Experienced with working along-side vendors and suppliers to resolve technical issues to protect scope, timing, and cost metrics.
• Ability to work, collaborate, cooperate, and utilize Best Practice across various functional groups on a daily basis to accomplish goals
•Interpret and work from detailed engineering drawings, schematics, blueprints, and installation manuals.
•Perform advanced mechanical tasks including rigging, leveling, precision alignment, torqueing, piping, and mechanical integration.
•Troubleshoot and resolve installation issues, equipment malfunctions, and mechanical interferences.
•Verify installations meet OEM specifications, safety codes, and quality standards.
Leadership & Coordination
• Act as on-site Lead Technician, directing daily activities of installation crews and subcontractors.
• Assign tasks, monitor progress, and ensure efficient use of labor and resources.
• Mentor and train junior technicians, providing hands-on guidance and technical instruction.
• Serve as the primary technical point of contact between field teams, engineers, project managers, and customers.
Quality & Documentation
• Conduct inspections and quality checks throughout the installation process.
• Complete installation reports, checklists, punch lists, and as-built documentation.
• Support equipment testing, startup, and customer acceptance activities.
Project Support
• Assist with installation planning, sequencing, and scheduling.
• Coordinate material handling, tools, and equipment needed for installations.
• Support continuous improvement initiatives and best practices in installation methods.
Day-to-Day Responsibilities:
• Maintain safe work practices, inform others of hazardous conditions or personal practices as expressed on project team.
• Manage and lead installation and debugging activities to meet milestone & timeline objectives for successful capacity adds.
• Design & implement mechanical solutions and process changes to improve capability of manufacturing equipment.
• Lead in or solve mechanical and process issues through data analysis, experience, and collaboration with subject matter experts
• Manage spare part identification and storeroom entry as recommended by suppliers or peer engineers, noting available spares within (2)-plant footprint.
• Develop and update engineering and operations documentation.
• Support training for the operations workforce regarding equipment or operations changes
• Perform advanced troubleshooting, diagnosis, and repair of mechanical systems, equipment, and machinery (e.g., pumps, motors, conveyors, hydraulics, pneumatics, etc.).
• Align, test, and calibrate mechanical systems after installation.
• Diagnose complex mechanical failures and recommend effective solutions.
• Interpret blueprints, schematics, and technical manuals to support troubleshooting and repair activities.
• Identify opportunities to improve equipment reliability, efficiency, and safety.
• Collaborate with other departments to implement process improvements.
Qualifications
Required Education:
• Associate's degree
• A high school degree will be considered with significant hands-on experience
Required Years and Area of Experience:
• 3+ years' experience in new equipment installations in a manufacturing environment, start-up experiences a plus
• Experience in a fast-paced, changing environment with multiple priorities
• Strong knowledge of mechanical systems, industrial equipment, and installation techniques.
• Proven ability to read and interpret engineering drawings and technical documentation.
• Experience leading crews in industrial, manufacturing, semiconductor, energy, or similar environments.
Required Skills:
• Ability to learn new technology and processes quickly
• Strong technical fundamentals with mechanical engineering skills
• Ability to multitask and prioritize work on an independent basis in a fast-paced project install manufacturing environment.
• Proficient with PC software, including Microsoft Office Suite
• Strong communication skills
• Expertise in mechanical systems such as hydraulics, pneumatics, bearings, gear systems, and conveyor systems.
• Ability to read and interpret technical drawings, blueprints, and schematics.
• Proficiency in using hand tools, power tools, and diagnostic equipment.
• Strong problem-solving, analytical, and critical-thinking skills.
• Knowledge of safety regulations and practices in an industrial setting.
• Basic computer skills for maintaining records and using CMMS (Computerized Maintenance Management Systems).
Certifications:
• Mechatronics trades highly desired
• Relevant mechanical or industrial certifications (e.g., Millwright, HVAC, or Welding) are a plus.
• OSHA or other safety certifications may be required.
Desired Skills:
• Hands-on experience in commercial manufacturing equipment
• Project leadership/management experience (including milestone management and financial ownership)
• Experience in vendor/supplier management on-site/off-site
• Experience with CAD
• SAP, Maximo, Maintenance Leadership
• Detail-oriented and able to perform with limited supervision.
Soft Skills:
• Leadership experience in technical project management
• Ability to work & effectively collaborate within a team
• Ability to allocate/supervise resources to accomplish aggressive project milestones & timeline within specification and costs.
• Able to shift tasks quickly
• Able to prioritize and multitask
• Communicate effectively both verbal and written
Hours of work/work schedule/flex-time:
• 40 hrs. (overtime expected). Due to the project timing; overtime and periodic off-hours coverage may be necessary to successfully complete workload and interact with other team personnel.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries regarding the following opportunity, please contact our Talent Specialist, Marshelin at (224) 507-1280 Title: Mechanical Engineer (Manufacturing / Equipment) Duration: 12 Months Location: On-site in Newton, NC Travel Requirements: Expected to be on-site in the plant during the week Travel to a supplier or vendor may be required for equipment check-out before shipment Work Schedule: Typical 40 hours per week.
May require working weekends/holidays or longer days to support installation schedule Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description Comments: 1) Candidates local to the NC region are preferred but Client is willing to consider candidates outside the local region who are willing to relocate at their own expense.
2) Candidates must be eligible to work in the US for at least 18 months.
Top skills: Experience with high-speed cable manufacturing equipment is a plus but not required (jacketing, ribbon stranding, buffering) Experience with mechanical equipment design, install, start-up and debug in a high-volume manufacturing environment.
Candidate must have 5 years demonstrated leadership experience with coordinating scheduling, workflows, etc..
Managing mechanical and electrical trades (both internal and external) executing equipment install and debug.
Skilled with use of design software (AutoCAD, Solidworks, Inventor) Scope of Position: A mechanical engineer responsible for leading and providing hands-on mechanical support for the installation, start-up and debug of high-cable manufacturing process equipment.
This includes working with a multi-functional team (mechanical, electrical, controls, facilities, IT, operations, etc.) Involves the application of mechanical principles encompassed in mechanics, hydraulics, thermodynamics, metallurgy, and machine design used for the design, production, operation, and use machinery of all types.
Requirements: Experience with high-speed cable manufacturing equipment is a plus but not required (jacketing, ribbon stranding, buffering) Experience with mechanical equipment design, install, start-up and debug in a high-volume manufacturing environment Managing mechanical and electrical trades executing equipment install and debug.
Skilled with use of design software (AutoCAD, SolidWorks, or Inventor) Knowledge of machine guarding and safety practices and standards (OSHA, ANSI, ASME, etc) OSHA 30 Certification desired Good written and oral communication skills Ability to collaborate and work with diverse teams (skills, gender, culture, race, etc.) Capable of multitasking Ability to work with minimal direction Independently determines and develops approaches to solutions Familiarity with other engineering disciplines (electrical, civil, process, etc.) Key Responsibilities Coordinating the task and workplan for team members to meet customer schedule Providing hands on input and insight into equipment installation and troubleshooting Support start-up and qualification of equipment Verifying equipment build and layout against drawings Coordinating installation plan with safety and plant receivers Conferring with Client engineers and vendors to resolve equipment install or build discrepancies Ensure safe work practices Updating drawings and equipment documentation Education: BS in Mechanical Engineering, Mechatronics, Mechanical Technology Minimum Experience: 5 Years Interview process: Initial teams meeting with manager, then onsite interview if local.
If not local, interview will be by teams.
Local candidates are strongly preferred.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
Manufacturing, Solidworks, Inventor, AutoCad, multitasking
We are privately held American owned Small Business made up of five (5) vertically integrated manufacturing and assembly divisions, each with their own history, specializations and products.
We are looking for dependable, fast paced, hard-working individuals with experience as a Mechanical Quality Inspector with the following qualifications and experience:
Principle Duties and Responsibilities
Use of basic inspection tools, including height stand, calipers, micrometers; comparator; Hexagon vision experience is a plus.
Experience fixturing and laying out part for dimensional readings.
Experience reading and deciphering blueprints, performing FAIR dimensional inspection reports.
Performs 1st article inspection on machined parts.
Performs in-process inspection, final inspection, and tool calibration as required to support the inspection department.
Maintain area neat and clean and adhere to all company safety rules and regulations.
Other duties are necessary to maintain the necessary levels of production.
Can work overtime as needed and weekends when needed.
Experience and Education Required
High School or Equivalent
Able to read, write, and comprehend the English language.
Blueprint reading
Basic Math / Geometry skills
Aerospace Experience is a plus.
Basic computer skills, including MS Office
Knowledge of various types of measuring instruments
Familiar with ANSI Y14.5 & ASME Y14.85
3-4 years of manufacturing or related experience
- Must have advanced ability to read drawings, specifications, acceptance test procedures, GD&T dimensioning
Physical requirements.
Frequent: Handle, manual dexterity, lift 5-49 lbs., reach, stand, stoop, and walk. Use personal protective equipment.
Required: Close vision, color, and depth perception.
- Familiarity with Aerospace plating and processing standards, such as standards for anodizing, chem.-film, passivation, chrome plating, silver plating, etc.
- Computer literate with experience in Microsoft Word, Excel and Outlook desired.
ITAR REQUIREMENTS:
To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
DCX-CHOL Enterprises Inc. is an Equal Opportunity Employer; employment with DCX-CHOL Enterprises Inc. is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
DCX-CHOL Enterprises Inc. will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each new employee's Form I-9 to confirm work authorization via E-Verify.
Wayne J. Griffin Electric, Inc. has been in business for nearly five decades and has grown to become one of the region’s largest merit shop electrical contractors. We believe that talented and caring people make us strong. Our growing company has over 250 active job sites across five regions, and we are seeking Electricians & Mechanics to join our team for projects throughout Durham, NC or Atlanta GA.
Electricians/Mechanics Qualifications:
$25-35 hourly earning potential
- Licensed electricians and mechanics with a minimum of five (5) years electrical installation experience in a commercial or industrial setting required.
- High school diploma or equivalent.
We offer competitive wages and many excellent benefits, including:
- Blue Cross Blue Shield PPO medical/dental/vision
- 401(K) with company match and 100% vesting
- Paid vacation, sick, and holiday time
- Tuition reimbursement up to $2,000 per year
- 10-hour OSHA Training
To learn more about our job opportunities, please call 5 or visit us online at Equal Opportunity Employer.
Job Description
BAS Industrial Services is looking for an experienced lead mechanical & electrical maintenance technician (Tech 3). Only candidates with a minimum of 10 years conveyor experience will be considered for Tech 3 positions. Work history must be verified with references before being invited to an interview. BAS is a growing company, with advanced opportunities for those who qualify. If you have less than 7 years of experience, look for BAS Industrial Service entry level position posting. Great way to learn a new trade and get paid to do it.
About this position:
* The probation period (90 days) will provide you with an opportunity to demonstrate your skills, knowledge and work ethic. At 90 days if you have had no infractions, safety violations, good punctuality, good attendance you will become a permanent BAS employee. Milestones will be set for advance pay.
Responsibilities:
This position requires a very serious, organized and mature individual who can perform under pressure. Each shift often comes with different challenges. Lead Tech 3 must have the ability to solve these challenges by developing plans, directing resources to overcome unexpected breakdowns. Lead Tech 3 are responsible but not limited to the following:
* Enforcing safety discipline on all assigned tasks, leading by example, and mentoring other techs.
* Oversee safety meetings, safety training and ensure safety paperwork is completed.
* Promoting and conducting good housekeeping practices.
* Develop and maintain a good working relationship with customers and other BAS techs.
* Maintain and troubleshoot all conveyor systems, electrical and mechanical.
* Design solutions for difficult problems, be on call for emergencies, and handle multiple projects and daily activities.
* Manage Preventive Maintenance programs.
* Ability to install, maintain, and troubleshoot relay logic, ladder diagrams, and control components-- photo eyes, motor starters, relays, limit switches, proximity sensors, timers, solenoids, Servo drives, frequency inverters, linear drives, techs, and encoders.
* Understanding of PLC programs to troubleshoot ladder logic (read use for troubleshooting), components (CPU back plains, I/O boards, counters, modules, and devices) and communications modules (Ethernet)
* Manage outside contractors when needed.
* Physically capable of regular bending, lifting, stretching and reaching both below the waist and above the head.
* Engage in full manual dexterity in both hands and wrists.
* Capable of walking in the FC/DC and around area with great frequency; facilities are over a quarter mile in length.
* Capable of climbing ladders and gangways safely and without limitation.
* Ability to work in construction /distribution environments that may be noisy, unlit, unheated, not air-conditioned.
* Access all areas of building (ascending and descending ladders, stairs, etc.)
* Manage maintenance shift, assign tasks to technicians.
* Develop plans on the fly and direct resources to perform repairs of unscheduled breakdowns.
* Maintaining, troubleshoot, perform scheduled repairs of machinery and conveyor systems.
* Paperwork - Order parts, facilitate customer work orders, document daily work log, keep time records of employees.
Skills/ Experience Needed:
.Computer - Excel, Word, look for parts on internet. Computer savvy.
. Read electrical schematics, understand AC, DC, relay logic, controls, and motors.
. Read hydraulic systems.
* Electrical - Understand and read electrical schematics and drawings. Understand AC power, DC power, relays, relay logic, push buttons, switches, PLC's, VFD's, DC drives.
* Mechanical - Understand and read mechanical drawings, change motors, gearboxes, bearings, repair chain system, replace conveyor belt lacing and belt tracking.
* Hydraulics - Understand and read hydraulic schematics.
For more information, please contact BAS Industrial Services.
Company Description
Electrical / mechanical contracting business. We provide scheduled and unscheduled repair and maintenance service to the material handling industry.
Majority of our work is with conveyor systems.
Company Description
Electrical / mechanical contracting business. We provide scheduled and unscheduled repair and maintenance service to the material handling industry. \r
Majority of our work is with conveyor systems.
Are you a Mechanical Superintendent who is looking for professional growth with long term stability?
Do you have a knack for leadership? Do you like being out in the field in middle of the construction chaos – planning, organizing, directing, leading, and actually witnessing the day-to-day work being put in to build structures that everyone is going to see, use, live, and visit? If this sounds like your type of job, W.M. Schlosser Company wants you managing our construction projects.
Job responsibilities:
We are looking for an experienced Mechanical Superintendent to plan and supervise a wide range of construction projects from start to finish. You will organize and oversee construction procedures and ensure they are completed in a timely and efficient manner. An excellent Mechanical Superintendent must be well-versed in all construction methodologies and procedures and able to coordinate a team of professionals of different disciplines to achieve the best results. The ideal candidate will have an analytical mind and great organizational skills. The goal will be to ensure all projects are delivered on time according to requirements and without exceeding budget.
Key qualifications:
- Proven leadership to manage the field operation
- Develop and maintain project schedules and budgets
- Provide/review RFI's and submittals
- Ability to perform mechanical take-offs.
- High knowledge of Blueprint comprehension
- Cost Management
- Effectively scheduling personnel
- Customer orientated and dedicated to the organization
- Coordination and oversight of installation of small and large diameter ductile iron piping.
- Coordination and oversight of installation of water treatment plant process equipment, i.e., large pumps, flocculators, mixers, sludge collectors, etc.
- Coordination and oversight of installation of wet and dry chemical feed systems
- Coordination and oversight of installation of plumbing and HVAC systems
- Coordination and oversight of installation of process instrumentation and controls
- Startup and commissioning of water treatment plant equipment and systems
- Prior management or supervisory experience
- Extensive mechanical (piping) construction knowledge
- Solid working knowledge of computer programs, including Word, Excel, Foxit PDF, Procore and Outlook
- Excellent problem solving and communication skills
- 10 years overall experience
A family-owned company is where you feel most at home. That is just one of the reasons that the W.M. Schlosser Company has enjoyed success and been a constant leader in the DC-MD-VA area for 60 years. The biggest reason is our people. Our employees are the most important component of our company. Unlike some of the bigger contractors, with Schlosser, you are a name not a number. Open door policy at all levels of management. Our philosophy is building careers and relationships is as important as the projects that we build. Come help us continue building the legacy of Wilbur Schlosser, founder of the company in our 60th year!
WMS welcomes people from all backgrounds and walks of life, and it’s reflected in our largely diverse community of WMS employees. WMS is proud to be an equal opportunity employer and is committed to providing equal opportunity for all employees and applicants. WMS recruits, hires, trains, promotes, compensates, and administers all personnel actions without regard to race, color, religion, sex, sex stereotyping, pregnancy (which includes pregnancy, childbirth, and medical conditions related to pregnancy, childbirth, or breastfeeding), gender, gender identity, gender expression, national origin, age, mental or physical disability, ancestry, medical condition, marital status, military or veteran status, citizenship status, sexual orientation, genetic information, or any other status protected by applicable law. Women and minorities are encouraged to apply.
