Crh Train Jobs in Usa

Job ID: 521072

Exempt

Oldcastle Infrastructure™, a CRH company, is the leading provider of utility infrastructure solutions for the water, energy, and communications markets throughout North America. We’re more than just a manufacturer of precast concrete, polymer concrete, or plastic products. We’re a trusted and strategic partner to engineers, contractors, distributors, specifiers, and more. With our network of more than 80 manufacturing facilities and more than 4,000 employees, we’re leading the industry with innovation and a safety-first mindset.

Job Summary

The P.L is the “voice of the customer” in our OI facilities. The P.L. is responsible for the customer experience from the point of sale to on-site delivery. To achieve OI’s goal to enhance “ease of doing business,” a role to represent the customer’s voice in our facilities has been developed to ensure 100% customer satisfaction on ALL sales orders. Once an opportunity becomes a sales order, the P.L. drives all activities from the point of sale to on-site delivery including coordinating with engineering, approval of submittals, scheduling with production and on-site delivery with the customer and transportation.

The P.L. acts as the main point of contact for customers and vendors on assigned sales orders and is directly responsible for monitoring the project costs and compliance with contract documents, attending job meetings and balancing the customer and OI interests throughout the entire process.

Job Location

• This position will be located at our plant in Brookshire, TX.

Job Responsibilities

• Primary responsibility is being the “voice of the customer” in OI facilities.
• Responsible for managing multiple sales orders concurrently.
• Upon sales order assignment by the C.O.M, share responsibility with the O.S.R and Est. to hold a Turnover/Kick Off meeting at the point of sale to ensure all needed information and paperwork are complete; that the scope of work is clear; review the estimate and confirm values for all items; and begins the process of scheduling the project with production to align with “Customer Ship Date” in AX.
• From point of sales order assignment, the P.L. becomes the point of contact for the customer. They must ensure the customer is kept up-to-date from production schedule to on-site delivery.
• Provide direction and oversight to all aspects of the project team: engineering, production planning, transportation, procurement and accounting.
• Prepare any applicable change order proposals in a timely manner, whether owner/ client/ engineer request or by generation from OI.
• Monitors the progress and status from the point of sales as it moves through the process, and acts to problem solve proactively, offers technical advice, and assists other staff to expedite assigned projects, removes obstacles which may cause a project to fall behind schedule.
• Ensures a mentality of continuous improvement of processes and systems.
• If needed, coordinate site visits and work with the customer to ensure that all issues that arise from the point of sale to completion of the project are resolved promptly, including but not limited to change orders, adjustments to schedule and collect information as appropriate to each assigned project. Identify and requisition special purchase items as required.
• Managing the required submittals/approvals with customer as required.
• Communicate with the Transportation department on the initial delivery needs of the customer and follow up when required.
• Working with other project managers and the plant manager to manage the long-term schedule to minimize conflicts with operational restrictions.

Job Requirements

• Bachelor’s degree or equivalent work experience required. *Civil Engineering preferred.
• 3+ years Project Management experience.
• Demonstrated ability to manage several large to small, complex projects simultaneously.
• Intermediate to advanced knowledge of MS Office (Word, Excel, PowerPoint and Outlook).
• Ability to review and work from production schematics and engineering drawings.
• Strong organizational and communication skills.
• Experience within the construction or precast concrete industry.

What CRH Offers You

• Highly competitive base pay
• Comprehensive medical, dental and disability benefits programs
• Group retirement savings program
• Health and wellness programs
• An inclusive culture that values opportunity for growth, development, and internal promotion

About CRH

CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization.

If you’re up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest!

Oldcastle Infrastructure, a CRH Company, is an Affirmative Action and Equal Opportunity Employer.

EOE/Vet/Disability

CRH is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law.

Job ID: 521625

Non-Exempt

Oldcastle Infrastructure™, a CRH company, is the leading provider of utility infrastructure solutions for the water, energy, and communications markets throughout North America. We’re more than just a manufacturer of precast concrete, polymer concrete, or plastic products. We’re a trusted and strategic partner to engineers, contractors, distributors, specifiers, and more. With our network of more than 80 manufacturing facilities and more than 4,000 employees, we’re leading the industry with innovation and a safety-first mindset.

Job Summary

The successful candidate will be responsible for preparing and modifying drawings per specifications and customer requirements. Prepare/maintain accurate catalog drawings and digital library for website. Work closely with Division Engineer, Sales, Production and Quality Control to ensure the product is built according to the latest part or shop drawings.

Job Locations

• This position will be based out of our office in Littleton, CO.

Job Responsibilities

• Create Shop Drawings of products using 2D or 3D drafting
• Create special manufacturing drawings for immediate production
• Adhere to customer (Internal and External) volumes, timelines and expectations
• Prepare, modify, and maintain accurate catalog drawings from existing and new products for production and Quality Control
• Prepare product assembly or shop drawings for existing/new products as needed for sales staff and special drawings for plant projects as needed
• Update/maintain digital database, i.e. Autodesk vault, cloud server, hard-copies and engineering documents
• Other duties may be assigned as needed

Job Requirements

• 2+ years of relevant experience with AutoCAD/Autodesk Inventor
• High school diploma or equivalent required/Associates Degree preferred
• Must possess the ability to read and interpret sketches, construction, and civil plans
• Ability to review and understand contract drawings and specifications
• Proficient in all Microsoft Office
• Basic mathematical skills
• Must be detail orientated and able to handle several projects at once with minimum help or guidelines from department from start to finish

Compensation

• Salary ranges from $27-$34/hr + 5% annual bonus
• Vacation hours of two weeks per year
• Sick leave benefits up to 56 hours per annum
• 401k plan
• Short-term and long-term disability benefits
• 11 paid holidays per year
• Annual community volunteer paid day

What CRH Offers You

• Highly competitive base pay
• Comprehensive medical, dental and disability benefits programs
• Group retirement savings program
• Health and wellness programs
• An inclusive culture that values opportunity for growth, development, and internal promotion

About CRH

CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization.

If you’re up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest!

Oldcastle Infrastructure, a CRH Company, is an Affirmative Action and Equal Opportunity Employer.

EOE/Vet/Disability

CRH is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law.

The Shelly Company, a CRH company, is a vertically integrated supplier of aggregates, asphalt, ready mix concrete and paving services throughout the state of Ohio. Our commitment to quality drives us to use the most modern, efficient and environmentally friendly technology in our industry. The Shelly Company is known throughout the industry for innovation, quality and for our commitment to safety.

Position Overview

Oversee and direct operations of a surface aggregate production facility, including safety, personnel, production/inventory management, maintenance planning/forecasting (fixed plant equipment), and partial assumption of P&L responsibility.

Key Responsibilities (Essential Duties and Functions)

The duties and responsibilities include but are not limited to the following:

• Ensure that all operations are in full compliance with federal and state regulations, including MSHA,ODNR, EPA, DEP, etc.
• Ensure compliance with The Shelly Company Manual of Safety Practices & Procedures.
• Enforce company policies, procedures, and work rules, discipline when necessary and document employee performance issues.
• Enforce company safety rules and conduct safety meetings, including toolbox talks; ensure facilities are operating in a safe manner.
• Supervise and direct facility personnel to ensure proper placement of resources.
• Identify and resolve regulatory, safety, personnel, and production problems in a timely and effective manner.
• Ensure interdepartmental reporting is completed satisfactorily (production reporting, fuel/hour meter readings, environmental/safety reporting, etc.)
• Communicate regularly with all supporting departments (Safety, Environmental, Equipment, Finance, Sales, HR, QC, etc.) and interpret needs to inform business decisions.
• Maintain constant awareness of financial standing of the facility and adapt forecasts to changing business conditions.
• Understand industry standards and best practices for managing a surface aggregate production facility including extraction methods, production strategies, fixed plant equipment operation and maintenance (conveyors, crushers, screeners, electrical systems, etc.).
• Accurately forecast production and maintenance activities as required.

Other Requirements

• Display a professional and courteous attitude to co-workers, supervisors, and the general public at all times.
• Must be willing to travel and work away from home when required.
• Must be willing to work nights and weekends when necessary.
• Report to the assigned job site ready to begin work at the designated start time.
• Strict adherence to Shelly Company policies and procedures as outlined in the Company Book of Policies.
• Willingness to work in a team environment and assist co-workers or supervisors with other duties as required.
• Timely and regular attendance is an expectation of performance for all Shelly Company employees. Employees will be held accountable for adhering to their workplace schedule.
• Assist with various training initiatives, as necessary.
• Attend relevant conferences/seminars/shows (with Manager approval) relative to technological advancements.

Supervisory Responsibilities

Fulfill supervisory responsibilities in accordance with the company policies, procedures, and applicable laws.

Responsibilities include, but are not limited to:

• Planning, assigning, and directing work.
• Willingness to develop subordinates’ technical and leadership skills and make recommendations for new job opportunities when appropriate.
• Effective management of employee performance through coaching, feedback (written and verbal), rewards, and discipline when necessary.
• Addressing complaints and resolving problems in a timely manner.
• Ability to get work done through others using effective delegation, scheduling, and time management practices.

Qualifications

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.

Education and Experience

Bachelor’s degree or equivalent from a four-year college or technical school; or two to four years related experience and/or training; or equivalent combination of education and experience.

Language Skills

Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to draft routine reports and correspondence. Ability to speak effectively to customers or employees of the organization.

Mathematical Skills

Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to create and interpret graphs.

Reasoning Ability

Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

Physical Requirements

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; and talk or hear. The employee frequently is required to climb or balance. The employee is occasionally required to sit and stoop, kneel, crouch, or crawl.

The employee must regularly lift and/or move more than 50 pounds. Specific vision abilities required by this job include distance vision, peripheral vision, and depth perception.

Work Environment

While performing the duties of this job, the employee continually works near moving mechanical parts and in outside weather conditions and is regularly exposed to wet, humid condition airborne particles, and extreme heat or cold. The employee is occasionally exposed to vibration.

The noise level in the work environment is usually very loud and may require protective equipment.

The statements included in this job description are not intended to be all-inclusive. They represent typical elements and criteria necessary to successfully perform the job. Other duties may be assigned as required. Requirements for this job are subject to modification by the Company and its designees, and reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

What CRH Offers You

• Highly competitive base pay
• Comprehensive medical, dental and disability benefits programs
• Group retirement savings program
• Health and wellness programs
• An inclusive culture that values opportunity for growth, development, and internal promotion

About CRH

CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization.

If you’re up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest!

The Shelly Company, a CRH Company, is an Affirmative Action and Equal Opportunity Employer.

EOE/Vet/Disability

CRH is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law.

Job ID: 516974

Oldcastle® APG, a CRH Company, is North America’s leading provider of innovative outdoor living solutions that enable customers to Live Well Outside. The manufacturer’s portfolio of premier building products inspires endless possibilities while providing enduring outdoor spaces where people can connect, reflect and recharge. Award-winning brands include Belgard® hardscape, Echelon® Masonry, MoistureShield® composite decking, RDI® railing, Catalyst™ Fence Solutions, Sakrete® packaged concrete, Amerimix® mortar, Pebble Technology International® pool finishes, Lawn & Garden mulches and landscape features, and Techniseal® sands and sealant technologies.

Job Summary

The Manufacturing Manager is responsible for leading and integrating all non-production support functions that are essential to the safe, efficient, and high-quality operation of the plant. This role has direct ownership of site-level performance in quality, safety, engineering, processing, mix operations, and tooling. The Manufacturing Manager partners closely with production leadership to drive continuous improvement, ensure regulatory and corporate compliance, and support operational excellence across all manufacturing processes.

Job Location

• This is an onsite role based in Flint, MI

Job Responsibilities

• Provide strategic and tactical leadership to site-level quality, safety, engineering, processing, mix, and tooling teams
• Ensure alignment with corporate policies, industry standards, and applicable regulatory requirements
• Develop and maintain systems that support product quality, workplace safety, and process capability
• Establish clear performance expectations and accountability across all support functions
• Lead root cause investigations and implement corrective and preventative actions for quality and safety incidents
• Oversee the development and control of mix formulations, process parameters, and tooling readiness to support production needs
• Support the introduction of new products, processes, and technologies, ensuring smooth integration into existing operations
• Collaborate with maintenance teams to ensure equipment and tooling are optimized for performance, reliability, and safety
• Identify and implement processing improvements to reduce waste, improve product quality, and enhance workplace safety
• Lead or support kaizen events, value stream mapping, and other lean manufacturing initiatives
• Monitor key performance indicators and drive data-based decision-making across support functions
• Foster a culture of continuous improvement and operational discipline
• Ensure full compliance with OSHA and other applicable federal, state, and local regulations
• Maintain audit readiness and lead internal and external audits related to quality, safety, and environmental compliance
• Develop and enforce risk mitigation strategies to reduce operational, environmental, and safety risks
• Promote a proactive safety culture through training, engagement, and visible leadership

Job Requirements

• Bachelor’s Degree in Engineering, Operations Management, or related field required
• 5+ years of experience in manufacturing or industrial operations, with at least 3 years in a leadership or supervisory role
• Demonstrated experience in managing or collaborating with quality, safety and engineering functions
• Strong knowledge or lean manufacturing principles, Six Sigma tools, and quality management systems
• Familiarity with OSHA and other regulatory frameworks
• Effective leadership, coaching, and team development skills
• Strong analytical and problem-solving abilities
• Excellent communication, organizational, and interpersonal skills
• Proficiency in Microsoft Office and ERP systems (SAP preferred)

What CRH Offers You

• Highly competitive base pay
• Comprehensive medical, dental and disability benefits programs
• Group retirement savings program
• Health and wellness programs
• An inclusive culture that values opportunity for growth, development, and internal promotion

About CRH

CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization.

If you’re up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest!

Oldcastle APG, a CRH Company, is an Affirmative Action and Equal Opportunity Employer.

EOE/Vet/Disability

CRH is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law.

Job ID: 520607

Exempt

Oldcastle Infrastructure™, a CRH company, is the leading provider of utility infrastructure solutions for the water, energy, and communications markets throughout North America. We’re more than just a manufacturer of precast concrete, polymer concrete, or plastic products. We’re a trusted and strategic partner to engineers, contractors, distributors, specifiers, and more. With our network of more than 80 manufacturing facilities and more than 4,000 employees, we’re leading the industry with innovation and a safety-first mindset.

Job Summary

The Production Supervisor is responsible for leading a manufacturing production team to work injury-free/incident free in a manufacturing environment. They will provide leadership and direction for their team in a way that motivates them to meet all productivity, safety, and quality goals. They are driven to continually improve performance and embrace changes that will help both their team and company meet production standards. They normally will lead a team of 10-15 team members.

Job Location

• This candidate will be on site at our Wilsonville, OR facility.

Job Responsibilities

• Ensures a safe workplace is maintained and there is a safety mindset in all things we do
• Follows, and ensures others follow, all policies, standards, and safety requirements defined by the company
• Drives safety excellence through promoting employee involvement, ownership, and accountability to proactively eliminate hazards
• Hires, schedules, and supervises full time staff and additional temporary staff
• Provides coaching and corrective feedback timely as well as administers disciplinary processes up to and including termination, as necessary
• Performs timely quarterly and annual reviews for all team members
• Facilitate team development and growth, employee skill development, problem-solving and resolution
• Oversees all process documentation and training program procedures for consistency of operational tasks, and the safety and cleanliness of the workplace
• Ensures a quality product is being produced and all quality processes are being followed
• Works directly with Quality Control, Engineering, and Maintenance, to improve quality, streamline efficiencies and reduce operating expenses
• Tracks productivity for measured efficiency and improvement and operates at or below the budgeted cost for production utilizing lean manufacturing procedures and cross training
• Oversees adherence to inventory control procedures to ensure inventory accuracy goals are constantly achieved
• Assist with troubleshooting and solving production issues
• Performs other duties as requested by management
• Demonstrated leadership in safety & environmental compliance
• Strong analytical, problem-solving, and critical thinking skills
• Ability to coach, develop and build a strong team of employees
• Strong listening and clear communication skills both written and verbal
• Ability to effectively resolve conflict
• Skilled at working effectively with cross functional teams
• Ability to manage multiple priorities simultaneously
• Demonstrated ability to work in a results-oriented environment

Job Requirements

• Minimum one year of supervisory experience required, manufacturing environment preferred
• High school diploma or equivalent required, college degree preferred
• Proficient in Microsoft Office including Word and Excel
• Ability to perform basic mathematical skills such as calculating percentages and volumes
• This job involves the following physical demands: walking, standing, bending, stretching, using hands and fingers to hold, grasp, push, and lift items
• A large percentage of work time is spent in a plant where temperatures can range from cool to hot and noise level can be moderate to high
• Lifting may be required with assistance provided if needed, up to 40lbs

What CRH Offers You

• Highly competitive base pay
• Comprehensive medical, dental and disability benefits programs
• Group retirement savings program
• Health and wellness programs
• An inclusive culture that values opportunity for growth, development, and internal promotion

About CRH

CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization.

If you’re up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest!

Oldcastle Infrastructure, a CRH Company, is an Affirmative Action and Equal Opportunity Employer.

EOE/Vet/Disability

• CRH is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law.

Position Description

Ryder is hiring a Mobile Maintenance Diesel Technician in Mobile, Alabama — offering weekly pay, excellent benefits, and a Technician career you can feel good about.

Hear it from a Ryder Technician Employee Here:

• 
  
• Mobile Technicians are issued a Ryder Mobile Maintenance Truck for Service Calls
  
  
• Hourly Pay: $34.00 per hour
  
  
• Certification Bonus of $100 for each New ASE Certification Obtained up to $700
  
  
• Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
  
  
• Sign On Bonus: Ryder Pays You $1750 at 30 days and $1750 at 90 days
  
  
• Schedule: Monday–Friday Weekends OFF
  
  
• Hours: Second Shift 11:30 am – 8:00 pm
  
  

We want the right Mobile Maintenance Mechanic to join us at Ryder to work on Heavy Duty Vehicles

Apply Here with Ryder Today

Spots are filling fast — click apply now to secure your spot.

Questions? Call Dominique or text “Mobile MT3” to 9 to speak with your recruiter today.

All the benefits you expect — without the wait.

• 
  
• Medical, Dental, Vision after 30 days
  
  
• 80 hours PTO your first year, starting Day 1
  
  
• Yearly merit pay increases
  
  
• 401 (k) company match
  
  
• PPE, uniforms, and boot allowance
  
  
• Build your skills - paid training
  
  
• Safety‑first workplace & State-of-the-art equipment
  
  
• Top Tech Competition: Earn $250 – $50,000 per year
  
  
• U.S. military veterans - extra paid day off
  
  
• 15% company stock discount
  
  
• Up to $5,000 in Tech tuition repayment
  
  
• 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure)
  
  
• Employee discounts on tools, vehicles, travel, tech & more
  
  

Click Here to See All Ryder Careers:

We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday

Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High School diploma or equivalent
  
  
• Vocational or Technical Certification in related field preferred
  
  
• Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment
  
  
• Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02
  
  
• Pass a Ryder drug test and previous employer's for the past 3 years, DOT physical, Ryder road test, pass a Ryder Background check and Motor vehicle check including Drug and Alcohol verification from previous employers for the last 3 years
  
  
• Able to take home assigned mobile service truck as applicable and secure vehicle and contents preferred
  
  
• Must be able to drive Ryder vehicles
  
  
• Ability to understand and adhere to Company policies in all areas
  
  
• Proven hands-on mechanic, customer service, and account management skills
  
  
• Ability to complete repair orders with the Company established systems
  
  
• Demonstrates customer service skills. Strong relationship management skills
  
  
• Strong verbal and written communication skills
  
  
• Ability to create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors)
  
  
• Ability to work independently and as a member of a team
  
  
• Ability to prioritize workload
  
  
• Flexibility to operate and self-driven to excel in a fast-paced environment
  
  
• Self-starter and self-sufficient approach
  
  
• Capable of multi-tasking, highly organized, with excellent time management skills
  
  
• Detailed oriented with excellent follow-up practices
  
  
• Entrepreneurial spirit
  
  
• Other Service Island support - SBTIII trained - SBT220 within 180 Days
  
  
• Other Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mix (predominant OEM of fleet mix) within 1 year
  
  
• Other Tire & Wheel safety - TW220 within 90 Days
  
  
• Other Preventive Maintenance: qualified - (PM230&PM298) within 90 Days
  
  
• Other Brakes-Air qualified - (BA220&BA298) within 90 Days
  
  
• Other Must meet qualifications of brake mechanic and inspectors (FMCS 396.25)
  
  
• Other Brake Hydraulic qualified - (BH220&BH298) where appropriate within 90 Days
  
  
• Other A/C recycling/recovery certified - CF609 within 90 Days
  
  
• Other A/C qualified - (AC220&AC298) within 180 Days
  
  
• Other HD electrical trained - DR208 within 90 Days
  
  
• Valid NonCommercial Driver License CLASS E, Commercial Driver License (CDL) CLASS A and/or State driver's license as required
  
  
• DOT Safety Regulated Position
  
  
• Safety Sensitive Position
  
  

Regulated Tech:

• 
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction. Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:
  
  
• A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks
  
  
• Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified
  
  
• Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes
  
  
• Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions
  
  
• Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check
  
  
• Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation
  
  
• Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems
  
  
• Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables
  
  
• Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights
  
  
• Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers
  
  
• Driveline: Lubricate drive line; Inspect components for wear or damage
  
  
• Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks
  
  
• Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition
  
  
• Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors
  
  
• Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal
  
  
• Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc.
  
  
• Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298)
  
  
• Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism
  
  
• Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents
  
  
• Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements
  
  
• Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer
  
  
• Act as a mentor for the Mobile Technician II level
  
  
• Performs other duties as assigned
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 4 days ago (3/16/2026 5:33 PM)

Requisition ID 2

Location (Posting Location) : State/Province AL

Location (Posting Location) : City MOBILE

Location (Posting Location) : Postal Code 36618

Category Technicians/Service Employees8

Employment Type Regular-Full time

Travel Requirements 0-10%

Position Code 1000127

Min Pay USD $32.00/Hr.

Max Pay USD $32.00/Hr.

Position Description

Torque by Ryder is immediately hiring a Permanent Full-Time Experienced Mobile Diesel Technician to support our Truck Fleet in Raleigh, North Carolina

Hear it from a Torque Mobile Mechanic Technician Here:

• 
  
• Technician Positions Pay Each Week
  
  
• Hourly Pay: $36.00 per hour based on experience
  
  
• Retention Bonus: $2000 paid every quarter within the first year.
  
  
• Schedule: Flexible 40-hour work week (weekend premiums apply)
  
  
• Fuel Card and Company Cell Phone provided
  
  
• For mobile technicians, work site service vehicle will be provided
  
  
• Grow with Ryder: This position provides additional training to level up.
  
  

We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks.

Apply Here with Ryder Today

Spots are filling fast — click apply now to secure your spot.

Questions? Call Dominiqueor text “Raleigh Mobile” to 9 to speak with your recruiter today.

At Ryder, we offer outstanding benefits:

• 
  
• Generous Paid Time Off
  
  
• Medical, Dental and Vision Insurance effective 30 days from hire date
  
  
• Life Insurance and Disability Insurance Options
  
  
• 401K Savings Plan with Ryder matching contributions
  
  
• Discount on purchase of Ryder Common Stock
  
  
• Employee Discounts on Automotive, Mobile plans, Travel and Hotels
  
  
• Accredited Tech School Tuition Reimbursement
  
  
• PPE & Uniforms provided at no cost
  
  
• Paid Job training and development
  
  
• Employee & Customer Referral Bonus program
  
  

Apply today and see why a job with Ryder is what you’ve been looking for. Call us or go online to apply to one of our career opportunities

Click Here to See All Ryder Careers:

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High school diploma or equivalent preferred
  
  
• Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
  
  
• Basic tools, required
  
  
• Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
  
  
• Routine preventative maintenance, which should include oil changes, brake and tire work
  
  
• Diagnostics and repairs, including AC, electrical systems
  
  
• Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs
  
  
• Four (4) years or more Relevant work experience, preferred
  
  
• NonCommercial Driver License CLASS E, preferred
  
  
• Valid Commercial Driver License (CDL) CLASS A, preferred
  
  
• Other State driver's license, as required
  
  
• Four (4) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment
  
  
• Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02
  
  
• Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents
  
  
• Must be able to drive Ryder vehicles
  
  
• Ability to:
  
  
• Understand and adhere to Company policies in all areas
  
  
• Complete repair orders with the Company established systems
  
  
• Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors)
  
  
• Work independently and as a member of a team
  
  
• Prioritize workload
  
  
• Proven hands-on mechanic, customer service, and account management skills
  
  
• Demonstrates customer service skills
  
  
• Strong verbal and written communication skills
  
  
• Flexibility to operate and self-driven to excel in a fast-paced environment
  
  
• Self-starter and self-sufficient approach
  
  
• Capable of multi-tasking, highly organized, with excellent time management skills
  
  
• Detailed oriented with excellent follow-up practices
  
  
• Entrepreneurial spirit
  
  
• Preventive Maintenance (PM230&PM298) within 90 Days
  
  
• Brakes-Air (BA220&BA298) within 90 Days
  
  
• Brake mechanics/inspectors FMCS 396.25
  
  
• Hydraulic Brake (BH220&BH298) where appropriate within 90 Days
  
  
• Tire & Wheel TW220 within 90 Days
  
  
• CF609 & A/C trained and qualified (AC220&AC298) within 180 Days
  
  
• HD electrical - DR208 within 90 Days
  
  
• Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days
  
  
• Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix)
  
  
• This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
  
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Decision making: Responsible for making decisions surrounding vehicle diagnostics and repair
  
  
• Performs vehicle maintenance and repair duties including: standard vehicle maintenance, preventive maintenance, complex repairs with minimal (if any) support
  
  
• Demonstrate the ability to access and use internal and external maintenance documents - Diagnoses and repairs complex mechanical and electronic problems with minimal (if any) support, utilizing diagnostic computers/software when applicable
  
  
• Performs remote triage to with RCRC and customers to determine best solution to assist roadside breakdowns
  
  
• Performs facility maintenance duties
  
  
• Interacts with customers/drivers to properly determine nature of complaint once assigned a task
  
  
• Instructs and advises other technicians regarding maintenance repair procedures and diagnostics
  
  
• Interact with non-contractual customers, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction.
  
  
• Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:
  
  
• A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks
  
  
• Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified
  
  
• Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes
  
  
• Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions
  
  
• Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check
  
  
• Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation
  
  
• Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems
  
  
• Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables
  
  
• Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights
  
  
• Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers
  
  
• Driveline: Lubricate drive line; Inspect components for wear or damage
  
  
• Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks
  
  
• Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition
  
  
• Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors
  
  
• Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal
  
  
• Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc
  
  
• Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298)
  
  
• Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism
  
  
• Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents
  
  
• Performs other duties as assigned.
  
  
• Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements.
  
  
• Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer.
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 3 days ago (3/17/2026 4:39 PM)

Requisition ID 2

Location (Posting Location) : State/Province NC

Location (Posting Location) : City RALEIGH

Location (Posting Location) : Postal Code 27616

Category Technicians/Service Employees9

Employment Type Regular-Full time

Travel Requirements Greater than 60%

Position Code 1001374

Min Pay USD $36.00/Hr.

Max Pay USD $36.00/Hr.

Help Others, Make a Difference, Save a Life.

Do you want to make a difference in people's lives every day?
Or help people navigate the tough spots in their life?
And do it all while working where your hard work is appreciated?

You have a lot of choices in where you work…make the decision to work where you are valued!

Join the McNabb Center Team as the Healthy Families Family Resource Specialist today!

The Healthy Families Family Resource Specialist

1. Manages referrals to the Healthy Families program in accordance with the Healthy Families America model requirements, including.

• Attempting contact with all referrals within 24 to 48 hours of receiving the referral.
• Contacting each referred family a minimum of 2 times a month during the first trimester and second trimester and until the family is assessed.
• Contacting each referred family a minimum of 1 time per week during the third trimester and until the family is assessed.
• Contacting each referred family a minimum of 2 times per week once the infant is born and until the family is assessed.
• Ensuring all necessary data related to referrals and screenings is inputted correctly into the Heathy Families America Entrance to Exit log that is submitted for accreditation.

2. Initiates and conducts screenings for families interested in the Healthy Families program.

• Conducting screening on all families using the Healthy Families Screening Tool and Contact Form.
• Ensuring all necessary data related to referrals and screenings is inputted correctly into the Heathy Families America Entrance to Exit log that is submitted for accreditation.

3. Initiates and conducts welcoming, quality, and engaging assessments for all families enrolling in the Healthy Families program in accordance with the core Healthy Families America model standards, including.

• Completing the validated Family Resilience and Opportunities for Growth (FROG) Scale with newly enrolling families.
• Helping families identify their family strengths and areas of need
• Ensuring the FROG assessments are completed prenatally or within 3 months of the infant's birth.
• Preparing each FROG for review by supervisor.
• Reviewing each FROG with supervisor.

4. Promotes the Healthy Families program by.

• Maintaining quality and positive relationships with referring organizations.
• Providing referring organizations follow up on every referral received, including whether or not the family declined services.
• Represents the program at formal community venues to promote the program and facilitate referrals.
• Attending monthly Community Advisory Boards to ensure close communication occurs between Healthy Families program and community resources.
• Collecting Memorandum of Understandings from formal community partners.

5. Maintains documentation of services, quality measurement tools, and tracking forms in accordance with the Health Families America model, including.

• Submitting monthly Family Assessment Worker reports by the third day of the month
• Maintaining the Referral Log submitted for accreditation.
• Maintain the Closure Log submitted for accreditation.
• Entering all screening, FROG, and Closure information onto tracking spreadsheets submitted for accreditation.
• Tracking all outreach and community event participation used in the accreditation process.

6. Maintains completion of required supervision, including.

• Ensuring weekly reflective supervision.
• Ensuring documentation and tracking information is prepared ahead of supervision for review.

7. Completes required trainings in accordance with Healthy Families America model standards, including completing.

• 28 hours of initial Foundations for Family Support Core Training.
• Annual Child Abuse and Neglect training.
• Annual service population-focused training.
• Annual McNabb Center Relias trainings, CPR and First Aid, and Handle with Care trainings.
• 15 hours of Infant Mental Health Training annually to maintain Endorsement.

8. Achieve and maintain Infant Mental Health Endorsement through the Tennessee Association of Infant Mental Health, including.

• If hired without an Endorsement, will submit application on Endorsement Application System, uphold Ethics Code, achieve mandatory references, and complete and submit 30 hours of required infant mental health training within first year of employment.
• Once Endorsement is achieved or if hired with an endorsement, will maintain endorsement every year but completing and submitting 15 continuing education hours and updating the Code of Ethics review process annually.

9. Takes an active role in ensuring the McNabb Center completes and maintains Healthy Families America Accreditation, including.

• Familiarizing self with the more than 150 required Policies and Procedures.
• Ensuring all documentation is maintained for accreditation.
• Ensuring trainings are maintained.
• Ensuring home visiting rates are tracked and home visits are completed.
• Completed accreditation interview.

10. Utilizes Reflective Practices in all aspects of work, which includes but is not limited to.

• Using the 7 Core Healthy Families America Reflective Strategies with all families during home visiting services.
• Maintaining interest in and the ability to see things from multiple points of view.
• Using an ecological perspective when working with families.
• Maintaining up-to-date knowledge of infants, toddlers, and attachment and the ability to their relationships with their caregivers.
• Using self-awareness by being clear on one's own values and triggers and how these things influence their perceptions and interpretation of family needs and the impact on families.
• Maintaining a balanced and realistic view of relationships including positive and negative aspects.
• Talking about and thinking about relationships and personal feelings that arise during supervision.
• Considering another person's feelings, wants, needs, and states of mind so interactions and responses can be intentional.
• Ensuring if ruptures occur with a family, they are repaired.
• Taking responsibility for their own contributions and reactions to difficult situations.
• Tolerating ambiguity.
• Recognizing and taking action when one's self needs to be put in a more balanced state.

JOB DUTIES/RESPONSIBILITIES

This job description is not intended to be all-inclusive; and employee will also perform other reasonably related job responsibilities as assigned by immediate supervisor and other management as required. This organization reserves the right to revise or change job duties as the need arises. Moreover, management reserves the right to change job descriptions, job duties, or working schedules based on their duty to accommodate individuals with disabilities. This job description does not constitute a written or implied contract of employment.

COMPENSATION:

• Starting salary for this position is approximately $16.71 - $17.76 /hr based on relevant experience and education.

QUALIFICATIONS - Healthy Families Family Resource Specialist

Experience:

• One-year experience providing evidence-based home visiting services preferred.
• Experience working with young children and families required.

Education / Knowledge:

• Bachelor's degree in Social Work, Psychology, or related field preferred.
• High school diploma and lived experience required if not Bachelor's Qualified.
• The Association of Infant Mental Health in Tennessee (AIMHITN) Infant Mental Health Endorsement preferred.
• Required to apply for AIMHITN Infant Mental Health Endorsement within the first year of employment if hired without endorsement.
• Training and knowledge in infant and early child development and parenting skills required.

Physical/Emotional/Social - Skills/Abilities:

• To perform this job successfully, an individual must have excellent communication skills with colleagues and clients.
• Must be able to build quality and caring relationships with clients where clients feel supported and heard.
• Must be able to maintain a trauma-informed approach when serving families.
• Must maintain appropriate boundaries with clients and colleagues.
• Willingness to engage in building reflective capacity.
• Must be able to manage a flexible schedule and multiple tasks.
• Must be able to use reflective practices in working with families.
• Must be able to work with diverse populations in culturally sensitive ways.
• Must have an F endorsement and be able to drive for work-related duties.
• Must be able to utilize a dependable vehicle for home visitation services.
• Certification and training in verbal de-escalation strategies required.

Location:

• Knox County, Tennessee

Apply today to work where we care about you as an employee and where your hard work makes a difference!

Helen Ross McNabb Center is an Equal Opportunity Employer. The Center provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment.

Helen Ross McNabb Center conducts background checks, driver's license record, degree verification, and drug screens at hire. Employment is contingent upon clean drug screen, background check, and driving record. Additionally, certain programs are subject to TB Screening and/or testing. Bilingual applicants are encouraged to apply.

PI755cdf33a2de-3631

At TDS Telecom, connecting people is at the heart of everything we do. We are forward thinkers who leverage cutting-edge fiber internet technology to strengthen communities. We are dedicated to excellence, which drives us to succeed together, creating a better world through meaningful connections. Ready to make an impact?

Join Our Team as an Outside Plant Construction Technician II in Butte, MT!

Ready to roll up your sleeves and bring cutting-edge fiber technology to life? As our Outside Plant Construction Technician II, you'll be at the heart of building and maintaining our state-of-the-art PON/fiber network.

From installing buried and aerial fiber facilities to mastering construction equipment like trenchers, backhoes, end loaders, and plows, you'll make a real impact every day. You'll also install, test, troubleshoot, and repair fiber facilities to keep our customers connected. If you love working with your hands, being outdoors, and making a difference in your community, this is the role for you!

Training:

As an Outside Plant Construction Technician II, you will have the opportunity to obtain a Class A CDL through our in-house training program. You will attend safety training at one of our new facilities where you will also be trained on Pole Climbing and Bucket Trucks. On-the-job training includes exposure to various construction equipment including Directional Drill Rigs, Mini Excavators, Trenchers, and Locators. Fiber optic training includes Fusion Splicing, Fault Detection, and exposure to OTDRs and other advanced testing equipment.

Please note: This position may be filled as an Outside Plant Construction Technician I (ID #2 , II (ID #2 , or III (ID#2 based on the candidate's skills and qualifications. Separate job postings outline the minimum requirements for each role. Please review both postings and apply to any level for which you are qualified and interested.

This position is eligible for a $5,000 sign-on bonus! (Payout terms apply)

Schedule: 

This is a full-time, 40-hour-per-week role with a *flexible schedule.

*Please note that the schedule may vary depending on the specific market.

**This position may be eligible for relocation assistance.  For further information, please contact the Talent Acquisition team.**

Why Join Us? 

As a member of our Construction and Service Enablement team at TDS, you’ll play a critical role in building and maintaining cutting-edge fiber optic networks that connect communities nationwide. With over 50 years of experience, TDS is a leader in fiber internet innovation, delivering up to 10 Gigabit speeds to homes and businesses. Join our team and be part of a collaborative environment where your skills in construction, safety, and technology will directly impact the future of connectivity in urban, suburban, and rural areas.

What We’re Looking For:

• Self-Motivated: You’re driven, ambitious, and always looking for ways to improve.
• Attention to Detail: You are committed to following safety protocols, and you take pride in precision, ensuring every measurement and assembly is accurate.
• Teamwork and Communication: You have strong communication skills and thrive in collaborative environments.
• Technical Proficiency: You have a solid understanding of telecommunication systems and equipment operation.   

What You’ll Do:

Perform general construction and maintenance of aerial and buried fiber facilities, ensuring compliance with maps, staking sheets, and safety standards.

• Operate and maintain construction equipment, including excavation tools, to build and repair outside plant fiber networks.
• Install, splice, test, troubleshoot, and repair fiber optic facilities using specialized equipment.
• Conduct cable fault acceptance tests, locate defective fiber, and resolve issues efficiently.
• Update GIS, maps, and as-builts; set and label infrastructure like peds, vaults, and handholes.
• Restore worksites to original condition upon project completion.
• Train and mentor team members as needed and maintain construction equipment.
• Provide support to field service technicians and complete required documentation promptly.

The functions listed above are intended to describe the general nature and level of work being performed by associates assigned to this job. They are not intended to be an exhaustive list of all responsibilities; other duties may be assigned.

Required Qualifications

• 1+ years of construction equipment operation utilizing various underground and aerial construction equipment such as directional drills, trencher/plow/rocksaw, backhoe, or bucket trucks -OR- current military service, or prior military service with honorable discharge.
• Must follow the TDS attendance guidelines in order to meet TDS’s business needs including but not limited to our obligations to our customers and to our customers’ needs.
• Must have and maintain a valid driver’s license and remain eligible for DOT requirements.

Other Qualifications

• Must have the ability to obtain a Class A CDL. A current CDL is preferred at hire, but TDS will train and certify eligible associates through its in-house CDL certification program after hire.
• Physical requirements may vary based on company needs: Ability to climb poles, ladders, towers, and other structures as needed. Ability to kneel, dig, lift, and pull.
• Upon hire, must successfully pass all components of the Safety Training course curriculum.
• Upon hire, must successfully complete customer-specific requirements, which may inlude a background check administered by the customer.
• Preferred 1+ years’ experience in the construction of fiber optic cable outside plant networks -OR- installation of any underground or overhead utilities will be considered.
• Horizontal directional drilling experience preferred.
• Understanding of telecommunication products and services.
• Proven organizational skills and ability to multi-task.
• May require occasional travel.
• Must be willing to work overtime as needed. May be required to work various/swing shifts as business needs dictate.

Do you meet the Required Qualifications but are unsure if your experience aligns with the Other Qualifications? We encourage you to apply! Research shows that many candidates hesitate to apply unless they meet 100% of the qualifications, even when they possess the skills and experience needed to succeed in the role. Experience and skills come in many forms, and they may not always match exactly what’s listed on paper, but they can still lead to success. If you meet the Required Qualifications and believe you have the potential to thrive in this role, we encourage you to apply today!

Training

As an Outside Plant Construction Technician II, you will have the opportunity to obtain a Class A CDL through our in-house training program. You will attend safety training at one of our new facilities where you will also be trained on Pole Climbing and Bucket Trucks. On-the-job training includes exposure to various construction equipment including Directional Drill Rigs, Mini Excavators, Trenchers, and Locators. Fiber optic training includes Fusion Splicing, Fault Detection, and exposure to OTDRs and other advanced testing equipment.

The duration of training varies based on the team assignment. Training for underground teams is 3 weeks, with an additional 1 week required for aerial training. Depending on factors such as market needs, prior skills, and team size, some individuals may only complete underground training, while others may undergo the full 4-week program, including aerial training.

Physical Demands and Work Environment

This role requires frequent standing, walking, kneeling, climbing, and handling equipment, with the ability to lift/move up to 50 pounds regularly and over 100 pounds occasionally. Vision requirements include close, distance, color, peripheral, depth perception, and focus.

Work conditions often include exposure to outdoor weather, attics, crawl spaces, high-risk areas (e.g., high voltage, trenches, manholes), and mechanical equipment. Occasional exposure to extreme temperatures, humidity, fumes, and loud noise is expected.

Benefits

We believe in taking care of our team, which is why we offer comprehensive benefits to support your health, financial well-being, and overall happiness. Join us and experience a work environment where your well-being is a top priority!

Associates scheduled to work 20 or more hours per week have access to:

• Medical Coverage
• Dental Coverage
• Vision Coverage
• Life Insurance
• 401(k) Plan
• Generous Vacation & Paid Sick Leave
• Seven Paid National Holidays & One Floating Holiday
• Paid Parental Leave (6 weeks after 12 months of employment)
• Adoption & Surrogacy Assistance
• Employee Assistance & Wellness Programs 

Associates working 30 or more hours per week additionally have access to:

• Short-Term & Long-Term Disability
• TDS Service Discounts
• Education Assistance
• Paid Volunteer Time 

In addition to these benefits, all associates will have the opportunity to participate in our Associate Resource Groups, which are designed to encourage community and facilitate professional development. To learn more, click here.

Who is TDS Telecom?

TDS Telecom provides high-speed internet, TV entertainment, and phone services to a diverse range of communities, including small to mid-sized urban, suburban, and rural areas across the U.S. With over 50 years of experience, TDS is committed to building and expanding fiber optic networks that bring cutting-edge connectivity to neighborhoods nationwide. Serving over 1 million connections, our mission is to create a better world by delivering innovative communication solutions that enhance the way people live, work, and connect. Visit  to learn more! 

At TDS, we are committed to Equal Employment Opportunity (EEO) and value the difference of backgrounds, experiences and perspectives in our workforce. We consider all qualified applicants without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or any other status protected by law.

Pay Transparency

The pay for this position ranges from *$25.13 to $37.69 per hour.

*The listed pay range reflects the minimum and maximum base salary. Actual offers will be based on factors such as skills, qualifications, experience, location, and role-specific competencies. Some positions may also offer additional compensation, such as bonuses or equity awards.