Crd Specifications Jobs in Usa

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

What You Will Do:

• Follow specific directions of Leader/Supervisor to carry out repair and restoration projects for engine parts.
• Layout work requirements and obtain needed equipment to perform routine repair and alteration operations.
• Perform bench repair operations to restore parts where close tolerances are not normally required and specifically defined criteria are used.
• Recognize need and arrange for repair or replacement of equipment used in performing the work as necessary.
• .Perform routine servicing throughout the assigned area following specified procedures and written instructions such as operator’s check list for upkeep and to assure equipment operates properly.
• Assist others responsible for new process tryout, and other specialized assignments within the scope and skill level of this job description.
• .Refer difficulties to Leader/Supervisor.
• Maintain logs and records as requested to communicate findings and prepare requests for approval.
• May be required to train for, obtain and maintain licenses, operator permits, and certifications within assigned area.
• May be assigned to carry out tasks not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individual’s skills.

2nd shift hours are Monday through Friday from approximately 3 pm to 12 am.

Qualifications You Must Have:

• High School Diploma or GED.

• U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.

• Able to obtain/ maintain active Security Clearance after Day 1 of work.

• 2 years of experience in blueprint reading, CNC manual machining & reading. Knowledge of shop math.

Qualifications We Prefer: In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

 Pratt & Whitney in Middletown, CT is a FAA regulated facility and as such under the U.S. Departments of Transportation’s Federal Aviation Administration (FAA). This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA’s regulation 14 CFR part 120, as well as 49 CFR part 40.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

We have an immediate need for a Production Machinist/Processor C 3rd shift (Onsite)

FUNCTION: Setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts. Perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

What You Will Do:

Job Description

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications.

• Recognize indications of dull or damaged cutting tools and replace them as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools.

• Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning.

• Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

Refer difficulties to leader or supervisor.

Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’

checklist, for upkeep and to assure equipment operates properly.

May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individuals' skills.

Qualifications You Must Have:

• High School Diploma or GED.

• U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.

Qualifications we prefer:

• 1-3 years of machining experience.

Qualifications We Value: In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

 Pratt & Whitney in East Hartford, CT is a FAA regulated facility and as such under the U.S. Departments of Transportation’s Federal Aviation Administration (FAA). This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA’s regulation 14 CFR part 120, as well as 49 CFR part 40.

Learn More & Apply Now!

Must be a U.S. Citizen. This position may require access to systems/tools that are restricted to individuals who possess US citizenship.

 In addition to transforming the future of flight, we are also transforming how and where we work. We’ve introduced role types to help you understand how you will operate in our blended work environment.

This role is:

Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines.

Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee’s personal responsibility.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

We are seeking a professional Power Design Electrical Engineer to assume a key role within the System Power, Analog and Controls Department. 
 
Do you enjoy power converter design? 
Do early-career engineers come to you for technical guidance? 
Do you have a strong desire to work on projects that are critical to the defense of our nation? 
  
If your answers are yes, we are looking for you to join our team!

 
 What You Will Do

• Design, analyze (including thermal considerations), simulate, and test power conversion circuitry potentially utilizing any standard non-isolated power conversion topologies (buck, boost, buck-boost) including modules and discrete designs.  

• Guide Electronic Computer-Aided Design (ECAD) personnel through PWB layout of power circuitry and technical drawing creation. 

• Perform design work within the bounds of a given schedule. 

• Present reviews of technical data to program leadership and technical staff. 

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years of prior 
  relevant experience

• Minimum of 2 years of professional experience in design, analysis, simulation, and/or test experience with linear converters. 

• Experience with any of the following non-isolated converter topologies:  buck, boost, buck-boost.    

• Experience with design, analysis, and test with analog electronic design and analysis, including FET, BJT, and/or Op-amp circuits. 

Qualifications We Prefer

• Lab experience specific to power electronics and/or controls electronics 

• Demonstrated use of software tools for electrical circuit simulation and/or printed circuit board layout   

• Demonstrated ability to document designs and circuit performance verification 

• Understanding of fundamental power conversion concepts, components, and techniques 

• Demonstrated understanding of linear controls and motor drive techniques. 

• Basic understanding of commonly used power converter and/or motor drive control schemes 

• Design, analysis, and/or test experience with any of the following isolated converter topologies:  flyback, half-bridge, full-bridge, and/or push-pull.  Design scope will ideally include stability. 

• Experience with performing circuit card assembly-level power architecture trades, and/or with system-level power architecture trades, including power converter specification development experience. 

• Professional experience guiding Electronic Computer-Aided Design (ECAD) personnel through PWB layout of power circuitry and technical drawing creation (direct experience with such tools is adequate to fulfill this requirement). 

• Familiarity with circuit simulator SIMPLIS, Saber and/or analysis tool Mathcad. 

• Experience with Mentor Graphics DxDesigner, and/or Hyperlynx. 

• Experience with acting as a liaison between program and functional management. 

• Experience with digital power control. 

• Experience with military specifications. 

• Experience with transformer and inductor design considerations. 

• Design experience with Electro-Magnetic Interference (EMI) concerns. 

• Design experience with voltages > 400V and/or power > 10kW. 

• Experience with program management tools such as Earned Value. 

• Experience with proposal development. 

• Ability to design to meet concerns of adjacent disciplines, such as thermal, structural, mechanical, reliability, and quality. 

• Ability to be a self-starter and be able to function in a dynamic environment. 

• Strong interpersonal, leadership, communication, and time management skills. 

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

This positions is onsite in Huntsville, AL and is eligible for relocation assistance.

Huntsville, Alabama, earned the nickname "ROCKET CITY" for its close association with U.S. space research since 1950. RTX has been here since the early years, having launched its Huntsville operations as the Raytheon Company in 1948. Some of the brightest minds in aerospace and defense call it home. Can you see yourself here?

Huntsville Location information: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

We have an immediate need for a Production Machinist/Processor C 2nd shift (Onsite)

What You Will Do:

Job Description

• Setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts.

• Perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications.

• Recognize indications of dull or damaged cutting tools and replace them as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools.

• Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning.

• Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

Refer difficulties to leader or supervisor.

Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’

checklist, for upkeep and to assure equipment operates properly.

May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individuals' skills.

Qualifications You Must Have:

• High School Diploma or GED.

Qualifications we prefer:

• 1-3 years of machining experience.

• In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

Learn More & Apply Now!

Must be a U.S. Citizen. This position may require access to systems/tools that are restricted to individuals who possess US citizenship.

In addition to transforming the future of flight, we are also transforming how and where we work. We’ve introduced role types to help you understand how you will operate in our blended work environment. This role is:

Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines.

Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee’s personal responsibility.

EV5 Job code: PWH77771 (Production Machinist/Proc C)

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

 Some see the railway as transportation, while at Plasser American we see it as transformation. The story of how steel tracks turned the American promise into American progress and forged a trusted pathway to the possibilities of the future. It’s a story that continues today, an American legacy unfolding mile by mile. There is a lot riding on those tracks and we know that support, quality and know-how are all important aspects in staying on track.

That’s why the Plasser American tradition begins with a promise. A promise to do things right. An unapologetic commitment to quality that makes us the longtime trusted leader in cutting edge American made innovations for the North American railway. It’s a promise to see things differently to turn ordinary steel into safer passages. To be a partner that you can count on to engineer solutions for the challenges of today and for the opportunities of tomorrow. From research and design, expert manufacturing and delivering unapparelled services, our customers trust us to keep them ahead of the curve.

Progress is about more than getting from Point A to Point B. It’s knowing you have a trusted foundation to move you forward toward new possibilities waiting around the corner. Join Plasser American to become part of our team forging ahead towards new opportunities in railway maintenance. The railway is a path to the future, choose this path and apply today.

Position Summary: 

• Applies knowledge of engineering principles to design products used on maintenance of way equipment for the railroad industry.
• Solid knowledge and understanding of fundamental and advanced Fluid power principles and ability to apply knowledge in the design of complex hydraulic/pneumatic circuits in an OEM environment.
• Complete fluid power systems experience with all levels of hydraulic/pneumatic components from pumps, motors, valves to actuators.
• Significant experience in mobile/construction equipment hydraulic/pneumatic system design, and development.
• Study, research and analyze customer specifications, manuals and other data to assist in creating machine work orders.
• Compiles and analyzes operational, test, and research data to establish performance standards for newly designed or modified equipment or product.
• Plans, schedules and coordinates the preparation of hydraulic/pneumatic projects to meet deadlines.
• Sizing and selecting hydraulic and pneumatic components and provide specifications to Planning/Purchasing department.
• Uses EPLAN Fluid for the automated design and documentation of circuits in fluid power installations in hydraulics, pneumatics, cooling and lubrication complying with current standards such as ISO 1219.
• Ability to systematically solve hydraulic/pneumatic related problems and perform root cause analysis.
• Supervise the detailed design and drafting of the hydraulic/pneumatic components and installation drawings with cad designers.
• Keeps informed of new methods and practices in system designs and components.
• Plans and develops experimental test programs.
• Analyzes test data and reports to determine if design meets functional and performance specifications.
• May require some traveling to customer job site to evaluate problems and report back to management with findings.
• Strong leadership and project management skills and self-starter.
• Good organizational skills, and ability to independently manage multiple and conflicting priorities.
• Ability to interact with various department and provide support to product line, purchasing, production, technical support and sales support.

Supervisory Responsibilities: 

None.

KNOWLEDGE, SKILLS AND ABILITIES

(The knowledge, skills and attributes required for satisfactory job performance)

Education: 

As a minimum require a Bachelor's Degree in an engineering field with at least 2-5 years of experience in the field of mobile hydraulic design. Experience to consist of relevant product design or development of hydraulic components or motion control systems.

Certified fluid power hydraulic specialist (CFHPS), NFPA (National Fluid Power Association) or other fluid power organizations certificate is preferred.

In addition to having the technical qualifications, a fluid power engineer must be a good team player with strong communication and problem-solving skills. The individual must be able to think practically and authoritatively, able to accommodate the company's deadlines, budget, and other resources to make informed decisions for their projects.

Knowledge: Incumbent must have proficient knowledge in the following areas:

• Knowledge of Engineering.

Skills: Incumbent must demonstrate or participate in internal/external training programs to obtain the following skills:

• Knowledge of the current ISO and ANSI (Y14) standards.

• Working knowledge of the metric system and geometric dimensioning and tolerance.

• Familiar with weldments, and machining operation.

• Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents.

• Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community.

• Ability to write articles for publication that conform to prescribed style and format.

• EIT certification will be considered as a PLUS.

• Motivated and self-starter with the ability to work under deadlines.

• Ability to apply mathematical concepts such as Calculus and modern Algebra.

• Ability to define problems, collect data, establish facts, and draw valid conclusions.

• Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

• AREMA, AAR, S.A.E. membership helpful but not required.

Applicable Technical Competencies: Incumbent must have working knowledge and demonstrated abilities utilizing mechanical knowledge: Specific applications combined with knowledge competencies are as follows: Rating Level: 1-5 (1= minimum 5= Maximum)

Application

Required Level of proficiency

Preferred Level of proficiency

Autodesk Vault Professional 2018

4 - Full Proficiency

5 - Expert Proficiency

Inventor Professional 2018

4 - Full Proficiency

5 - Expert Proficiency

AutoCAD 2018

4 - Full Proficiency

5 - Expert Proficiency

Microsoft Outlook

3 - Working Proficiency

3 - Working Proficiency

Design Review

3 - Working Proficiency

4 - Full Proficiency

Microsoft Excel

4 – Full Proficiency

5 - Expert Proficiency

Microsoft Word

4 - Full Proficiency

4 - Full Proficiency

JIRA & Confluence

3 - Working Proficiency

4 - Full Proficiency

E-PLAN

3 - Working Proficiency

4 - Full Proficiency

Automation Studio

4 - Full Proficiency

5 - Expert Proficiency

Personal Attributes: Incumbent must maintain strict confidentiality in performing the duties of a Fluid Power Engineer. The incumbent must also demonstrate the following personal attributes:

• Be honest and trustworthy
• Be respectful
• Possess cultural awareness and sensitivity
• Be flexible
• Demonstrate sound work ethics

• Accrue 80 Hours of Paid Time Off during your first year of employment
• 10 Paid Holidays per year
• 401(k) match of $0.50 for every $1.00 you contribute up to 6% of your salary
• You may receive a merit bonus after completion of the audit at the end of the fiscal year
• Tuition Reimbursement
• Free Short and Long Term Disability after 90 days of employment
• Free Life Insurance – 2 times your annual salary
• Company Events
• Free employee medical and dental coverage. – valued at $7,500.00

As part of the Plasser family brand, which is the largest Maintenance of Way equipment provider in the world, PAC is a rapidly growing provider of railway equipment in North America. Continuing for the next few years, PAC will continue to make significant investments in the North American Market including a new office building and a substantial addition to our manufacturing facility. PAC is making the needed investments to continue its growth trajectory for many years to come. The next several years will be an exciting time of transformation. We look to the future to enhance our team and achieve our goals.

PIe7c863ba6816-31181-39769453

Position Summary:

The Project Engineer will be responsible for design on multiple projects, directing and/or leading other design professionals within their discipline, and working with other design disciplines internal and external to PEC to develop engineering solutions for PEC’s Clients. This position will be responsible for providing design deliverables for a variety of projects, while maintaining PEC’s standard of excellence. This position utilizes BIM/CAD software, hand calculations, and computer-based calculations.

Duties and Responsibilities:

• Responsible for project completion in accordance with qualify assurance policies, standards and project specifications
• Prepare and review engineering plans and drawings
• Assist in the preparation of project proposals, cost estimates, and feasibility studies
• Performs and/or directs engineering design, coordination with other design staff for construction document and specification production in compliance with building codes, construction administration, and development of reports/studies
• Serves as an advisor to the Project Manager, identifying and communicating any potential risk to the project in a timely fashion
• Performs and/or directs design computations by hand and by computer software
• Uses experience, education, and judgement to make informed decisions. Retains knowledge and builds on previous experiences to increase capabilities in breadth and complexity
• Organizes multiple projects and tasks and completes them in a timely manner, on schedule, and per PEC Standards. Oversees tasks that have been delegated to other engineers and support staff

• Effectively communicates and coordinates with the Design Team to complete design tasks on numerous projects

• Perform quality control reviews at appropriate milestones
• Mentors, trains and develops less experienced staff
• Participates in business development activities to include developing and maintaining relationships with clients
• Other projects and responsibilities may be added at the company’s discretion

 Special Knowledge, skills and abilities:

• Ability to work independently and with others, with minimal supervision.
• Strong attention to detail and accuracy in preparing engineering plans, reports, and documentation
• Familiarity with local regulations, permitting processes, and design standards
• Excellent oral, written, and interpersonal communication skills.
• Knowledge and skill in determining project requirements, setting project scope of work, determining design budgets, determining preliminary construction budgets, and review of contracts. 
• Strong work ethic
• Experience with computer aided drafting and modeling using industry accepted software as described below:
  1. AutoDesk Revit 
  2. AutoDesk AutoCAD
  3. Microsoft Outlook, Excel, Word, and PowerPoint
  4. Bluebeam Revu
  5. RISA/RAM
  6. Enercalc
• Experience with codes and regulations, interpreting plans, and design discipline specific project components as described below: Electrical Equipment Layout and Room Sizing
  1. Structural Design & Calculations for Buildings
     • Load Path Analysis
     • Lateral Analysis – Seismic and Wind Load
     • Lateral force-resisting systems
     • Structural Elements Design (beams, columns, joists, slabs, walls, and foundations)
  2. Structural Materials (Steel, Concrete, Masonry, Wood)
  3. Storm Shelters
  4. Deep Foundation Systems
  5. Precision Equipment/Machine Foundations
  6. Pre-Engineered Metal Building Foundations
  7. Building Condition Assessments
  8. Structural Repair/Retrofit of Existing Buildings

 Education and Experience:

• Minimum of a B.S. Degree in an appropriate field of study from an accredited college is required.
• Minimum four (4) years of experience in engineering.

 License and Certification:

• Professional Engineering (PE) license in the location of practice is required.

Summary of Benefits

• Medical
• Dental
• Vision
• 401K Matching
• Life Insurance
• Short- and Long-Term Disability
• Maternity Leave
• Identity Theft Insurance
• Cancer Insurance

 Work Environment:

PEC values a healthy work-life balance, and we focus on working efficiently and collaboratively to ensure quality and productive work as well as quality time away from the office. The work environment is business casual, friendly, respectful, and team oriented with daily peer interactions regarding work progress, client needs and project-specific technical issues. We strive to create an enjoyable work environment with support and opportunities for positive career growth. Much of the work will be conducted within an office setting with frequent sitting, reaching and manipulation of objects, tools and/or controls. The position requires mobility. Duties involved require moving materials that weigh up to 10 pounds on a regular basis and up to 25 pounds on an occasional basis. Manual dexterity and coordination are required over 50% of the work period while operating equipment such as computer keyboard, mouse, calculator and similar machines. At times, bending, reaching, standing, and walking may be required.

Supervisory Responsibilities (if there are no supervisor responsibilities, put N/A): 

• N/A

PEC is an AA/EEO/Veteran/Disabled employer.

PM21

PI2b5abb43b163-31181-36975277