Cq Insulation Jobs in Usa

Atlas Molded Products - a Division of Atlas Roofing Corporation - specializes in the development and manufacture of innovative, high-quality, HFC- and HCGC- free Expanded Polystyrene (EPS) insulation for construction, packaging, and original equipment management (OEM) products. Atlas EPS insulation is suitable for interior and exterior construction applications, various packaging uses and as part of manufactured systems, such as recreational vehicles, garage and pedestrian doors and sunroom panels.

Atlas Roofing Corporation, a privately owned company established in 1982, is an international and multi-divisional manufacturer of roofing, sheathing, facer, and insulation product solutions.

Atlas Molded Products is seeking a Plant Manager for the Martinsville, Virginia facility.

Plant Manager Primary Responsibilities

• Responsible for all safety, product quality, company culture/values, operational performance, environmental health and safety compliance and all local, state, and federal standards.
• Coordinate all aspects of plant operations through plant leadership to ensure the site meets or exceeds the key performance indicators for safety, quality, and service while minimizing cost, inventory, and waste.
• Implement cost effective systems of control over capital, operating expenditures, manpower, wages, and salaries in line with corporate guidance.
• Serve as plant champion for safety and quality programs and initiatives. Ensure a safe work environment through strict adherence to Atlas’ safety policies and procedures with focus on developing a zero-injury culture.
• Achieve manufacturing profit objectives to meet quality and delivery requirements (Customer Service) at the lowest overall cost.
• Support Engineering with product improvements, new product development, and testing.
• Manage capital equipment selection, acquisition, and implementation, manufacturing budget and long-range planning, preparation, and facility maintenance and enhancements.
• Foster a culture of continuous improvement within the workplace.
• Responsible for selection of development of direct reports and creating an atmosphere of career development within the facility.
• Establish and maintain clear and measurable expectations for each employee to build ownership within the team.
• Complete all administrative requirements (monthly reports, manufacturing reports and analysis, etc.)

Plant Manager Experience

• Ten years of progressive experience in manufacturing management experience required.
• 5+ years direct supervisory experience, including staff development and planning responsibility.
• 5+ years’ experience engaging employees and developing a strong safety culture.
• Experience with business financial statements, budgetary processes, and cost control.
• Proven track record of developing, leading, and maintaining a continuous improvement mindset.
• Experience in capital investment planning and program management.
• Experience with Environmental, Health and Safety regulatory compliance.

Plant Manager Knowledge, Skills & Abilities

• An ability to balance and achieve positive results in the areas of safety, quality, productivity, cost, and employee relations.
• A demonstrated ability to lead people and get results through others.
• Analytic skills to effectively evaluate business proposals and analyze process data.
• Ability to multi-task effectively in a fast-paced environment.
• Excellent communication skills, both written and verbal.
• Proficient with MS Office and experienced with manufacturing ERP systems.
• Must have a flexible schedule and be able to work extended hours if needed per business needs.

Plant Manager Education, Licenses & Certifications

• Bachelor’s degree (B.A. or B.S.) in related field preferred; or equivalent combination of education and experience.

Plant Manager Additional Information

• Must be able to tolerate industrial/manufacturing environment to include variations in temperature from extreme cold to extreme heat; wet and/or humid conditions; dust/fumes/chemical exposure; and noise intensity. Personal protective equipment required.

Total Compensation

• Atlas Molded Products offers a competitive compensation and vacation/holiday package as well as a comprehensive benefits program including Medical, Dental, Vision, Disability, Life/AD&D/LTD insurance, 401k and Medical & Dependent Care Spending Accounts.

Atlas Roofing Corporation is an Equal Employment Opportunity Employer

No calls or agencies please.

Company Description

At Home Weather, we help homeowners reduce energy costs and minimize their carbon footprints with ease. As a trusted Mass Save® partner and a leading Home Performance Contractor in Massachusetts, we are committed to creating energy-efficient homes that save you money and support a greener future.

Role Description

This is a full-time on-site role for a Crew Lead at Home Weather, located in Lawrence, MA. The Crew Lead will be responsible for supervising and coordinating the work of the crew to ensure projects are completed efficiently and on time. Daily tasks will include assigning duties, monitoring work quality, ensuring safety protocols are followed, providing on-the-job training, and resolving any issues that arise. The Crew Lead will also be responsible for maintaining communication with management and clients to provide updates on project progress.

Key Responsibilities:

• Lead and supervise a crew performing home performance work such as insulation, air sealing, blower door testing, and HVAC efficiency measures.
• Review work orders and ensure materials, tools, and equipment are ready for each job.
• Conduct on-site safety briefings and ensure compliance with OSHA and company safety standards.
• Monitor progress to ensure work meets quality assurance, program, and inspection standards.
• Train, coach, and evaluate crew members to improve efficiency and workmanship.
• Communicate clearly with customers about work being performed, timelines, and any necessary follow-ups.
• Coordinate with the Production Manager, Energy Auditors, and Warehouse staff to ensure smooth workflow.
• Complete daily production reports, time logs, and material usage documentation.
• Maintain a clean, organized, and professional job site and vehicle.

Qualifications

• Strong leadership and team management skills to effectively oversee a crew
• Knowledge of industry-specific safety protocols and regulations
• Excellent problem-solving and conflict-resolution skills
• Strong communication skills to interact with team members, management, and clients
• Ability to work efficiently under pressure and meet deadlines
• 2–3 years of hands-on experience in weatherization, insulation, HVAC, or general construction; at least 1 year in a leadership role preferred
• Certifications (Preferred): BPI Building Analyst or Envelope Professional, OSHA 10/30.
• Other: Valid driver’s license and clean driving record required.
• Building science fundamentals, air sealing, insulation types, and diagnostic testing (blower door, duct leakage).
• Physical Requirements: Ability to lift 50+ lbs, work in attics, basements, and crawl spaces, and tolerate varying temperatures.

POSITION OVERVIEW

We are seeking an experienced Sheet Metal Mechanic with 5+ years of experience performing repairs, installations, and modifications to aircraft. The ideal candidate will possess a strong understanding of sheet metal fabrication and repair, with a focus on safety and precision, and prior helicopter experience. Join our team and work on cutting-edge aviation projects in a dynamic and rewarding environment!

KEY RESPONSIBILITIES

• Comply with all safety regulations and procedures while performing work.
• Read and interpret engineering drawings, blueprints, manuals, and specifications to determine layout requirements.
• Mark outlines or patterns on materials using measuring instruments and scribes.
• Set up and operate fabricating machines (shears, brakes, presses, forming rolls, punch and drill presses) to cut, bend, block, form, punch, drill, or shape parts to specifications.
• Operate soldering equipment to join sheet metal parts.
• Smooth edges and surfaces of grooves or joints using hand tools, power tools, files, or chemicals.
• Inspect completed work for conformance to specifications and tolerances using precision measuring instruments.
• Diagnose and repair structural discrepancies as needed.
• Install structural components such as bulkheads, formers, stringers, ribs, frames, and other components.
• Install insulation materials (fiberglass, polyurethane) using hand or power tools.
• Repair dents, cracks, and damage to the aircraft skin using appropriate hand tools.
• Repair holes in aircraft skins with patch materials like aluminum, composites, fiberglass, or synthetic resin materials.
• Install, repair, and replace aircraft skins, structural components, and interior furnishings (insulation, carpeting, vinyl flooring, seats, paneling, soundproofing materials, paint).
• Keep detailed records of all repairs and work performed on aircraft in compliance with repair station guidelines.

REQUIRED EXPERIENCE & QUALIFICATIONS

• 5+ years of experience as a sheet metal mechanic
• Helicopter experience STRONGLY preferred
• Working knowledge of blueprint reading, geometry, and trigonometry.
• Proficient in the use of hand tools, power tools, and welding equipment.
• Familiarity with aviation maintenance manuals and repair station guidelines.
• Personal basic tools/box required

PHYSICAL & COMPLIANCE REQUIREMENTS

• Must be able to pass a 10-year criminal background check and FAA DOT drug test.
• Proof of U.S. Citizenship required.
• US Driver’s License.

PAY & SCHEDULE

• Hourly based off of experience and interview.
• Split per diem is available to those who qualify
• Paid weekly after the first week of work
• OT is time and ½
• Monday – Friday
• 7:00am – 3:00pm
• Must be flexible to work OT when needed

HELICOPTERS SERVICED

• Airbus Helicopters
• Leonardo (AgustaWestland)
• MD Helicopters
• Sikorsky
• Bell

Job ID: 520372

Leviat, a CRH company, is a global leader in lifting, insulating and connecting technology for the construction industry. The company employs nearly 3,000 diverse, talented employees at 60 locations globally. Leviat's engineered products and innovative construction solutions are used in a variety of market segments from residential, non-residential and infrastructure, enabling users to build better, stronger, safer, and faster. We stand together to REINVENT THE WAY OUR WORLD IS BUILT.

Job Summary

We are seeking a dynamic, passionate, and driven individual to join the team as a Product Manager. Innovative products and services are at the foundation of our company; this position reports to the Head of Product Management and is responsible for supporting the development of a multi-year product strategy across Leviat NA lines of business. A key part of the role is the cross-functional partnership and alignment across Operations, R&D, Sales and Finance. As Product Manager, you will be a change agent, working to define category specific product roadmaps and launch strategies.

Job Location

This role is based out of our office in Riverview, FL - hybrid work schedule after 6 months onsite.

Job Responsibilities

• Develop and manage Tiltup Lifting & Insulating product line roadmap, establishing the value proposition for products and solutions across all markets.
• Lead new product development using Stage-Gate process
• Manage product line life-cycle management including SKU rationalization, complexity reduction, make vs buy analysis, inventory and pricing management supports
• Analyze and benchmark the product offering of key competitors for gaps or opportunities
• Work closely with the Commercial teams to collect and analyze key data about the marketplace including market size, competitive landscape, pricing and product gaps
• Identifying customer needs and represent the voice of the customer
• Lead annual product portfolio review
• Partner with key customers to develop customized solutions to drive innovative
• Support product training
• Support marketing content creation

Job Requirements

This role requires full attention of the candidate & constant communication with our team. We are looking for a passionate, motivated and highly organized individual with self-starting tendencies and a bias towards action. The ideal candidate will feel confident representing the voice and general tone of the company, along with comfortable handling and digesting a large amount of real-time data.

• Bachelor’s degree or advanced degree in business, marketing or engineering
• Minimum 3 years of product management, product marketing or product development experience
• Proven record of launching new successful products
• Proven leadership and strategic capabilities with ability to engage with different stakeholders within a large organization
• Excellent communication skills, with the flexibility and adaptability to liaise with and manage at all levels in organization
• Highly organized and proven project management skills
• High level of analytical and financial acumen, possess the ability to use information and data to develop an informed business case
• Self-motivated, visionary, future-oriented and results driven
• Must be adaptable with ability and willingness to efficiently manage multiple priorities and demands that continuously shift in a dynamic and fast paced environment
• Travel up to 15%

What CRH Offers You

• Highly competitive base pay
• Comprehensive medical, dental and disability benefits programs
• Group retirement savings program
• Health and wellness programs
• A diverse and inclusive culture that values opportunity for growth, development, and internal promotion

About CRH

CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization.

If you’re up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest!

Leviat, a CRH Company, is an Affirmative Action and Equal Opportunity Employer.

EOE/Vet/Disability

• CRH is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law.

The Opportunity

Solarcore is an advanced materials technology company that develops the most scientifically innovative thermal solutions on the planet. We are on a mission to solve the world’s largest thermal efficiency problems by revolutionizing the antiquated world of thermal insulation.

Solarcore is looking for an experienced Government Product Line Manager (PLM) to support our expansion into United States Government business, including Department of Defense contracts and federal procurement. This person must be well-versed in navigating the complex world of government contracting, compliance, and logistics.

The ideal candidate will have a deep understanding of government sales, defense procurement cycles, and must have a proven track record of securing & supporting government contracts while working within the DoD Procurement Processes.

As our Government PLM, you will need to be passionate about creating new to the world solutions across a wide variety of applications, ensuring that our products align with federal procurement standards, and developing and managing the stage gate process to smoothly move products from the ideation to the final commercialization phase.

This position will report to the VP of Product and will be a main point of contact for the entire Solarcore executive team.

Key Responsibilities

·      Work with Solarcore's Government Business Development Team, OEMs, and Program Managers to understand requirements for success for all government projects and communicate this to the PD team.

·      Understanding of Mil-spec requirements and standardized testing methods such as (ASTM, ISO, Oeko Tex, NFPA).

·      Manage product responses to RFPs, RFQs, and government solicitations, ensuring competitive, compliant proposals.

·      Develop and maintain relationships with OEMs and Program Managers across multiple channels.

·      Manage the full life cycle with OEM partners to ensure continued success.

·      Ensure our products are built to compliance standards (Berry Amendment, FAR , DFARS, etc.).

·      Assist in developing pricing strategies for contracts of all sizes.

·      Assist in 5-year planning and product roadmap for all government needs.

·      Assist in creating standalone material and full application validations by designing DOEs.

·      Lead internal stage gate process for the government channel.

·      Track, understand, and summarize competitor products, markets, and pricing.

·      Attend industry events, sales meetings, and supplier visits.

·      Assist in preparing for government audits and performance reviews.

 Experience and Requirements

·      5+ years of experience in government sales, contracting, or compliance, ideally in DoD, aerospace, defense, or advanced materials.

·      3+ years of project management in government sales, contracting, or compliance, ideally in DoD, aerospace, defense, or advanced materials.

·      5+ Experience working with military or defense agencies & prime contractors.

·      Active security clearance or the ability to obtain one is required.

·      Ability to coordinate with cross-functional teams (Sales, R&D, Operations, Legal, and Finance) to ensure compliance and execution.

·      Strong understanding of defense apparel, military cold-weather gear, or industrial insulation applications is a plus.

·      Passion for building things from the ground up and continued improvement of both products and processes.

Our Vision: 

Create Thermal Technology That Empowers Humanity to Reach Our Full Potential 

The Culture: 

Solarcore’s continued success is made possible by the Solarcore team. The Solarcore team is made up of hardworking individuals that live and breathe Solarcore’s Pillars and science the sh*t out of life— 

1. Have Grit 
2. Be Adaptable 
3. Take Ownership 
4. Be Conscious 
5. Be Transformative 
6. Be Collaborative 

These values are the common thread between every Solarcore team member, and they ultimately provide the foundation for our success.

Compensation for this role depends upon experience and will be within $135,000-$160,000 annually.

Pay: LG TBD Subject to Collective Bargaining.

Benefits

WEG offers competitive compensation, exciting career growth opportunities, and excellent benefits, including:

• Paid Vacation & Holidays
• Excellent Medical, Dental and Vision coverage
• 401(k) with company match
• Tuition reimbursement
• Company paid Life and Disability insurance
• Employee Assistance Program (EAP)
• Bonus plan (prorated)

Company Overview

WEG: Our Company: Founded in 1961, WEG is one of the largest electric machine manufacturers in the world. We employ over 49,000 people globally and offer a diversified and integrated product line, with sales in more than 135 countries. Our U.S. operations are expanding rapidly, and were looking for dedicated individuals to help us achieve our ambitious growth plans.

Our Culture: We value each individual's contribution to our success and motivate our team through integrity, ethics, and continuous support for personal development. We prioritize professional and personal growth opportunities, human rights, diversity, and environmental sustainability. We invest in solutions to reduce carbon emissions and encourage our employees to engage in social activities focused on health and education.

At WEG, our values are: Human Company, Teamwork, Efficiency, Flexibility, Innovation, and Leadership.

Sustainability: We are committed to driving efficiency and sustainability. Our sustainability strategy is based on four pillars:

• Sustainable Products and Solutions: We provide products and services with the highest efficiency and lowest carbon footprint, supporting our customers' decarbonization journeys.
• Responsible Supply Chain: We engage a supply chain that upholds ethics in human rights, labor relations, and environmental preservation.
• Circular and Efficient Operations: We optimize eco-efficiency in natural resource management, reduce emissions and waste, and promote recycling and reuse.
• Engaged Employees and Communities: We ensure safe working conditions, promote well-being, and foster an inclusive, innovative, and high-performance environment.

Role: Tank Prep / Process Operator

You may see yourself in this role, if you are an experienced production operator who has mechanical aptitude, a strong work ethic, and are looking for a serious career opportunity.

You will perform a range of tasks in the production of a transformer, including:

• Reading and understanding Bills of Materials (BOMs), instructions and drawings.
• Inspection of tank and cover for defects
• Complete quality check of welded areas to meet manufacturing procedures and rework/repaint if required.
• Clean out all threads on tank and cover with tap/die and vacuum debris.
• Rotate cover and install and wire Current Transformers (CTs) per engineering design.
• Cut and install floor insulation and hardware before tanking.
• Cut insulation and install shunts on tank walls prior to tanking.
• Prep and install radiators after welding of cover.
• Move transformer and parts to and from weld booth as required.
• Assist in Final Assembly as needed.

No 3rd Parties, please.

are an Equal Opportunity Employer.

Basic:

• Ability to work within the WEG Code of Ethics & Values. (WEG Code of Ethics, 4th Edition)
• Able to work over-time as needed.
• Resides or plans to reside within reasonable commuting distance--no relocation assistance available for this role.
• Has current work authorization for employment in the United States.
• Must complete: talent assessment, Job interview, pre-employment drug screen and background check.
• Safety Sensitive position: Drug panel includes THC.

Preferred:

• High School Diploma or Equivalent.
• Two years prior manufacturing experience.
• ACT WorkKeys National Career Readiness Certification (NCRC): Platinum or Gold Level.

Compensation details: 23.46-24.9 Hourly Wage

PI198c69b59165-26289-39993808

• 
  
• Assemble compressors in assigned area using Work Center Instructions (WCI), Piping & Instrumentation instructions (P&I), Wiring Diagram (WD) and Bill of Material (BOM) and assembly drawings.
  
• Apply decals to machines, as needed.
  
• Utilize Andon signals per guidelines.
  
• Measure, cut, bend, fit small tubing to machine. Install tubing and fittings using hyferset.
  
• Install foam insulation on tubing and controls.
  
• Install heat trace tape to tubing and controls AND/OR bend large tubing with power bender per print or custom fit (Industrial).
  
• Assemble frames in assigned area, per BOM, or WCI.
  
• Assemble separator tanks in assigned area, using BOM, P&I or WCI.
  
• Assemble components to engines in assigned area, per BOM or WCI.
  
• Connect motor leads and connectors to power source per WD and BOM.
  
• Wire machines or packages, terminating wire harnesses or basic wiring in assigned area, per WD.
  
• Assemble couplings on engines/motors and air ends in assigned area, per WCI, BOM.
  
• Inspect finished machines at the end of process in assigned area, and receive them into finished goods.
  
• Align motor, air end and coupling in assigned area, using calipers, dial indicators and straight edge.
  
• Assemble and insulate enclosures and install on machine in assigned area, per BOM, WCI.
  
• Assemble mounted or remote cooler packs in assigned area, per BOM, WCI, WD and P&I.
  
• Terminate wiring for controls, basic panels, fan motors, etc. in assigned area, per WD and P&I.
  
• Test electrical controls/components per WCI, WD and P&I.
  
• Assemble and/or rework compressor packages and equipment.
  
• Requisition and stock materials and supplies.
  
• Keep equipment and work area clean and orderly.
  

• High School education or equivalent and a minimum of two years year post high school training/experience.

• 
  
• Minimum of five years' previous manufacturing assembly required.
  
• Basic computer skills required.
  
• Basic reading skills necessary to perform the functions of the job.
  
• Mechanical assembly ability, ability to read simple blueprints, wiring diagrams/drawings preferred.
  
• Prior forklift experience or completion of forklift training preferred.
  
• Working with various hand and pneumatic tools and various measuring tools.
  
• Ability to read blueprints.
  
• Knowledge of basic electricity and wiring diagrams/drawings.
  

• 
  
• Lifting up to 35 lbs.
  
• Lifting over 35 lbs. requires a lifting device, crane/hoist, or assistance from another associate.
  
• Physically able to lift, bend, stoop, climb, reaching, kneeling and working in awkward positions.
  
• Work involves considerable stooping, bending, and kneeling.
  
• Working with cranes, presses, cleaning solvents, sharp edges on parts, hot materials, electrical components, and moving parts by carts.
  
• Working with high air pressure equipment, and at times extreme noise.
  
• Safety Requirements:
  • 
    
  • Must understand and comply with the 5 Cardinal Rules.
    
  • Participate in EHS quarterly audits, if required.
    
  • Required to wear the proper PPE equipment for the work area.
    
  • Required to attend scheduled toolbox and safety meetings.
    
  • Must immediately report injuries or unsafe conditions to the supervisor.
    
  
  
  

• N/A

Project Engineer

Location: Tulsa, OK

Description

Project Engineers (PE) are the foundation of Select Engineering's ability to successfully execute large Engineering, Procurement, Construction projects in the Oil and Natural Gas industry. These individuals must not only be good engineers but must also possess and apply proactive leadership skills to successfully interact with project engineering teams and clients. The PE is responsible for making technical decisions with the ability to focus on technical solutions that will aid in the successful completion of a project with focus on project time and schedule.

Abilities, Skills, and Knowledge:

• Perform under minimal supervision with or without a Project Manager (PM) in a timely and accurate manner with emphasis on quality and customer service
• Must be a team player and leader that will work with the PM and other personnel and assist in inter-discipline information flow
• Design successful engineering systems and processes as applicable as it relates to natural gas, chemical, or oil and gas industries
• Interact directly with PMs, inter-disciplines, and Clients regarding projects as primary technical contact
• Proactively forecast and identify project needs and project performance issues and remediate as necessary, including working with PMs and discipline leads to identify out of scope work
• Hold design coordination meetings with discipline leads to facilitate inter-discipline coordination
• Communicate technical decisions, changes, modifications, client requests, etc. across all disciplines
• Create and maintain project lists (including for Equipment, Valves, and Specialty Items), specifications (including piping, paint, and insulation), and track overall design requirements and criteria per Client and project requirements meeting required design codes
• Support vendor documentation including submittal for internal review, tracking redlines, and ensuring comments have been implemented and are coordinated with project contractual obligations
• Review and maintain project P&IDs, along with the PM, to ensure redlines have been implemented into the design
• Review technical deliverables and ensure scope is per contract
• Review isometric drawings, which includes the following:
• Meet pipe specifications, design criteria, and paint & insulation requirements o Match the P&IDs
• Ensure all tagged items matches the P&IDs, equipment, valve, instrument, and specialty item lists.
• Review and gather final vendor and engineering documentation for creation of project data books

Attend model reviews, PHA, internal and customer meetings, P&ID reviews with responsibilities including, but not limited to, the following:

• Take notes
• Provide updates
• Ensure comments have been implemented in design
• Walk down plant and redline P&IDs as necessary
• Help identify scope growth from initial contract agreement, estimate equipment, construction and engineering costs, and track costs and change order approval, if necessary
• Answer project specific questions from engineering and design
• Answer project specific questions from construction, shop, and sub-contractors

Specify and assist with procurement of the following:

• Equipment
• Valves
• Specialty Items
• Instrumentation
• Assume responsibility if Project Manager is absent
• Complete all tasks assigned by Project Manager in a timely manner

Experience/Education Requirements:

• Minimum of a Bachelor's Degree in Engineering
• Minimum of 5 years of experience as an engineer, preferably working in the oil and gas industry

Atlas Roofing Corporation, a privately owned company, established in 1982, is an international and multi-divisional manufacturer of roofing, sheathing, facer, and insulation product solutions.

From a single asphalt shingle manufacturing facility in 1982, Atlas has grown to 36 facilities in North America providing worldwide product distribution. Today, products from the company’s four major divisions, Polyiso Roof & Wall Insulation, Shingle & Underlayment, Molded Products, and Web Technologies, are manufactured in state-of-the-art facilities and shipped from our network of manufacturing plants and distribution facilities in the United States, Canada, and Mexico. It’s amazing how our customer-first philosophy has grown on our clients.

Atlas Roofing Shingle and Underlayment & Ventilation Division is seeking a Production Supervisor for the Hampton, Georgia facility.

Production Supervisor Primary Responsibilities

• Supervise approximately 20 hourly personnel and activities on shift to achieve or exceed determined standards to produce a quality product in a safe manner and within customer specifications.
• Assign and maintain workflow, checks progress and quality of work, assists employees in the course of their daily work activities and assures compliance with production schedules.
• Responsible for ensuring proper job sequence and set up of work, verifying accuracy of work and timecard information, recording overtime work, maintaining flow of finished goods to shipping and proper material and tool storage.
• Investigate and eliminate production variability resulting in downtime and/or below standard measurements and determine remedial action. Requests maintenance assistance as required.
• Coordinate activities with any related departments; determine the proper quality control procedures are being followed.
• Responsible for the proper and efficient utilization of manpower and machinery, including adequate training of new personnel.
• Responsible for maintaining good housekeeping and maintaining safe work practices and conditions.
• Recommend purchase of necessary supplies; equipment, materials, etc. initiates purchase requisitions.
• Prepare and maintains production reports and records.
• Make suggestions as to improve methods of production, cost savings, etc.
• Coordinate handling of employee grievances with Superintendent and HR as necessary.
• Responsible for various other functions such as assisting in taking periodic physical inventory.
• Constant surveillance of machinery and equipment, and other duties determined by the Superintendent.
• Able to work rotating shifts and weekends when scheduled.
• Minimal travel requirements as determined by Superintendent.

Production Supervisor Skills & Abilities

• Organization - Must have sound organizational skills. Ability to deal effectively with changes in production scheduling and ensure production processing/paperwork accuracy.
• Communication - Ability to provide relevant and timely information in a clear manner.
• Follow Through – Fulfills the requirements of the position as described. Completion of assigned tasks in a timely manner. Anticipates what needs to be done and proceeds without direction in a timely manner.
• Problem Solving – Ability to think through issues and develop solutions in a timely manner.
• Team Building – Willing to work with others and utilize group dynamic to form solutions.
• Language -Must be able to speak, read and write fluent English.
• Strong interpersonal skills and ability to communicate clearly (both orally and written) with a wide variety of personnel in different functional areas.
• Mathematical abilities - Basic arithmetic (addition, subtraction, multiplication, division) and ability to calculate percentages and add, subtract, multiply and divide decimals. Must be able to use a tape measure and calipers.
• Basic reasoning ability - Ability to read and interpret policies and procedures. Ability to present information and respond to questions from employees.
• Competent with Microsoft 365 Word, Excel, Email, ADP WFN, PeopleSoft and Bizware.

Production Supervisor Education and/or Experience

• High School Diploma, some college level courses preferred.
• Minimum five (5) years manufacturing experience, minimum two (2) years prior supervisory experience preferred.
• Roofing manufacturing and union experience preferred.

Total Compensation

• Atlas Roofing Corporation offers a competitive compensation and vacation/holiday package as well as a comprehensive benefits program including Medical, Dental, Vision, Life/AD&D/LTD insurance, 401k and Medical Spending Accounts.

Atlas Roofing Corporation is an Equal Employment Opportunity Employer.

Our client is a $30M pipe insulation system business and a division of an $85 million company! They have partnered with us to find a Sales Account Manager to step into an established book of business in the Portland market. The role is open as the incumbent has since been promoted, and they are looking for someone with strong commercial/industrial sales experience to manage a $6-8m book! This will be covering all of Oregon with very few overnights as the focus is on greater Portland.

What You'll Do

• Manage existing accounts
• Call on insulation contractors

What You'll Need

• Building materials distribution experience
• Experience calling on industrial and/or commercial contractors