Cpg Controller Jobs Jobs in Usa
788 positions found — Page 4
Capture Manager, LV/Estimator
🏢 CPG
Salary not disclosed
Position:
Capture Manager, LV/Estimator
Location:
19775 Belmont Executive Plaza
Suite 200
Ashburn, VA
Job Id:
835
# of Openings:
1
TITLE: Capture Manager, LV/Estimator
LOCATION: Ashburn, VA
POSITION SUMMARY: The LV Capture Manager / Estimator (Strong in LV Cabling & LV Infrastructure) supports CPG in determining the growth and implementation of all White Space Fit Out aspects of the company. This to include but not limited to the following: Assist in the development of the low voltage cost estimates and cost budgets for new projects across a portfolio of fast-paced construction projects as it pertains to the LV portions of the projects. You will be involved in the solutioning, pricing and proposal phases along with the actual implementation of the self-performed cabling aspect of our growth strategy. Knowledge in the understanding to the other aspects of WSFO is also required. Primarily, Basket Tray, ladder rack and fiber runner applications. Knowledge in how containment, caging, floor tile cuts, Power feeders/Power whips and BCMS/EPMS integrate into the entire build process.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
Computer Skills:
Certificates and Licenses:
Supervisory Responsibilities:
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
We Utilize E Verify
#LI-TG1
Pay Range: $130,798 - $196,253 per year
Apply for this Position
Capture Manager, LV/Estimator
Location:
19775 Belmont Executive Plaza
Suite 200
Ashburn, VA
Job Id:
835
# of Openings:
1
TITLE: Capture Manager, LV/Estimator
LOCATION: Ashburn, VA
POSITION SUMMARY: The LV Capture Manager / Estimator (Strong in LV Cabling & LV Infrastructure) supports CPG in determining the growth and implementation of all White Space Fit Out aspects of the company. This to include but not limited to the following: Assist in the development of the low voltage cost estimates and cost budgets for new projects across a portfolio of fast-paced construction projects as it pertains to the LV portions of the projects. You will be involved in the solutioning, pricing and proposal phases along with the actual implementation of the self-performed cabling aspect of our growth strategy. Knowledge in the understanding to the other aspects of WSFO is also required. Primarily, Basket Tray, ladder rack and fiber runner applications. Knowledge in how containment, caging, floor tile cuts, Power feeders/Power whips and BCMS/EPMS integrate into the entire build process.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- Review and understand RFP/RFQ documents from customers and supports request for information (RFI) process as it pertains to the low voltage and related WSFO items of the projects.
- Identify project risks and/or challenges as part of solutioning process.
- Assist in generation of rough order of magnitude and/or formal estimates for potential projects pertaining to LV efforts or LV portions of larger efforts.
- Assist in proposal development of the deliverable.
- Maintain a well organize database of bid documents for reference upon award of contract to manage the kickoff process with the PreCon Manager.
- Identify additional revenue opportunities for CPG, as applicable.
- Coordinate with personnel from sales, engineering, preconstruction, execution, and finance teams.
- Collect different quotes from subcontractors, vendors, and suppliers pertaining to the task at hand.
- Review and assess cost estimates.
- Identify labor, material, costs, and time requirements by researching proposals, blueprints, and any related documents.
- Comfortable making site visits and documenting the data for distribution to the CPG team.
- 50% travel for local candidates within the NOVA area. 5% outside NOVA.
- Create shop drawings and other related documentation for potential change orders during project execution.
- Assist estimation and procurement teams to ensure correct material orders and project pricing.
- Perform site walks to assist the estimation team in properly pricing material and labor for new opportunities.
QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
- 5-10 years of LV installation/Estimation and on-site project management preferred.
- 2+ years of experience in construction estimating, with specific knowledge of mission critical systems
- 2+ years of data center experience relating to batteries, UPS replacements and general maintenance required in a mission critical environment is preferred
- Electrical estimating is a plus
- Ability to interpret contract terms, conditions, and exhibits as applicable to project requirements
- Strong interpersonal skills and the ability to work both independently and in a team environment
- Excellent organizational and problem-solving skills
- Demonstrated experience developing and justifying budgets
- Ability to create and maintain processes for project documentation
- Ability and willingness to think outside of the box to find creative and innovative solutions prior to and during the construction process to reduce costs with no impact on quality and reliability
- Possess excellent communication skills, attention to detail, and be able to maintain high-quality standards
- Proficient with Microsoft Office Suite. On Screen Take Off or Bluebeam, Building Connected or Accubid or RS Means preferred.
- Must be a US Citizen
- 10% travel
Computer Skills:
- Windows power user skill set, proficient with Microsoft Office Suite, and estimating software such as Accubid, RS Means, On Screen Take Off, Bluebeam, AutoCAD. Fluke/Viavi and other assorted Fiber testing equipment, Fluke LinkWare, Viavi J-Reporter and/or other Testing platform software's. Fujikura, Sumitomo and/or similar splicing tools and software's.
- Procore Software for vendor management.
Certificates and Licenses:
- None
Supervisory Responsibilities:
- No supervisory requirements for this role
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- Prolonged periods of sitting at a desk or working on a computer. Must be able to lift up to 15-50 pounds at a time. May be required to walk around facility. Can safely work from a 12' ladder, as well as safely operate and work from a lift to greater heights. Need to be able to visually identify colors for copper and fiber link identification.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
Benefits to Joining Our Team
CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage
- Health Benefits - (Medical, Dental & Vision Insurance)
- Flexible Spending Account Options
- 401K Plan
- Employer paid Life & Disability Insurance
- Paid Time Off
- Employee Referral Program
- Employee Assistance Program (EAP)
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
We Utilize E Verify
#LI-TG1
Pay Range: $130,798 - $196,253 per year
Apply for this Position
Not Specified
Controls Technician II
🏢 CPG
Salary not disclosed
Position:
Controls Technician II
Location:
19775 Belmont Executive Plaza
Suite 200
Ashburn, VA
Job Id:
923
# of Openings:
1
TITLE: CONTROLS TECHNICIAN II
LOCATION: Ashburn, VA
POSITION SUMMARY:
Controls Technicians monitor the control systems of automated equipment. They use software to verify that the controls are within certain parameters and work to quickly troubleshoot problems when they arise to avoid or minimize interruptions to production. The Controls Technicians II works under general supervision, independently performing the essential functions at an advanced level.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
* Responsible for providing an advanced level of expertise in maintaining, troubleshooting, and servicing all aspects of the building automation systems.
* Must have the ability to maintain, improve, and participate in troubleshooting HVAC equipment serving throughout mission critical facilities.
* Install, configure, test and maintain application software and system management tools
* Oversight and hands-on troubleshooting experience with electrical and mechanical systems are desired, across the spectrum of technologies that support continuous operations.
* Basic writing and verbal skills are required. Effectively communicate with the site management team and the customer to understand requirements and solve complex facility system problems.
* An understanding or ability to quickly learn electrical and mechanical systems along with prior experience with facilities system troubleshooting is highly desirable.
* This position may collaborate with other specialized technicians, mechanics or subcontractors to perform facility-related maintenance and repairs.
* Provides instruction, mentors and trains less skilled technicians as needed.
* Mechanical and Electrical systems oversight, oversee and monitor all components of the site infrastructure to ensure operational integrity.
* Participate in test & commissioning phases of construction for validation of programming
* Perform data integration of equipment utilizing various field protocols (BACnet, Modbus, etc.)
* Monitor's suppliers and third-party vendors as required
* Communicate with remote and local supporting personnel via email and telephone
* Demonstrates attention to detail, good comprehensive and analytical skills, and excellent organizational skills.
* Understands company policies and enforces safety regulations. Safely performs functions of the position including following proper safety guidelines such as job hazard analysis and lockout/tag-out procedures.
* Operates a variety of equipment such as hand tools, laptop computers and diagnostic hardware to perform work.
* Other duties as assigned by Manager or Supervisor.
QUALIFICATIONS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
* High school diploma or demonstrated equivalent.
* Five years of experience performing Control System / Building Automation/Management System service and repair in a data center, heavy industrial, or pharmaceutical/biomedical environment, or demonstrated equivalent combination of education and experience.
* Knowledge of data center infrastructure including related HVAC and electrical equipment.
* Preferred experience with Tridium Niagara (AX/N4) or other systems such as ALC, Honeywell, Schneider Electric and Siemens and associated instrumentation.
* Experience troubleshooting Control Systems, BAS/BMS systems including but not limited to (Automated Logic, Honeywell, Siemens, Edstrom, etc.)
* Possess knowledge of Building Systems sequence of operations
* Experience diagnosing, troubleshooting and repairing process mechanical systems
* MUST BE A US CITIZEN
Computer Skills:
* Proficient knowledge of Microsoft Office and software
Certificates and Licenses:
* No certificates or licenses required
Supervisory Responsibilities:
* No supervisory responsibilities
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
* While performing the duties of this job, the employee is regularly required to sit; Standing and walking is required. The noise level in the work environment is usually moderate. The employee must occasionally lift and carry up to 50 pounds.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
Pay Range: $65,013 - $97,580 per year
Apply for this Position
Controls Technician II
Location:
19775 Belmont Executive Plaza
Suite 200
Ashburn, VA
Job Id:
923
# of Openings:
1
TITLE: CONTROLS TECHNICIAN II
LOCATION: Ashburn, VA
POSITION SUMMARY:
Controls Technicians monitor the control systems of automated equipment. They use software to verify that the controls are within certain parameters and work to quickly troubleshoot problems when they arise to avoid or minimize interruptions to production. The Controls Technicians II works under general supervision, independently performing the essential functions at an advanced level.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
* Responsible for providing an advanced level of expertise in maintaining, troubleshooting, and servicing all aspects of the building automation systems.
* Must have the ability to maintain, improve, and participate in troubleshooting HVAC equipment serving throughout mission critical facilities.
* Install, configure, test and maintain application software and system management tools
* Oversight and hands-on troubleshooting experience with electrical and mechanical systems are desired, across the spectrum of technologies that support continuous operations.
* Basic writing and verbal skills are required. Effectively communicate with the site management team and the customer to understand requirements and solve complex facility system problems.
* An understanding or ability to quickly learn electrical and mechanical systems along with prior experience with facilities system troubleshooting is highly desirable.
* This position may collaborate with other specialized technicians, mechanics or subcontractors to perform facility-related maintenance and repairs.
* Provides instruction, mentors and trains less skilled technicians as needed.
* Mechanical and Electrical systems oversight, oversee and monitor all components of the site infrastructure to ensure operational integrity.
* Participate in test & commissioning phases of construction for validation of programming
* Perform data integration of equipment utilizing various field protocols (BACnet, Modbus, etc.)
* Monitor's suppliers and third-party vendors as required
* Communicate with remote and local supporting personnel via email and telephone
* Demonstrates attention to detail, good comprehensive and analytical skills, and excellent organizational skills.
* Understands company policies and enforces safety regulations. Safely performs functions of the position including following proper safety guidelines such as job hazard analysis and lockout/tag-out procedures.
* Operates a variety of equipment such as hand tools, laptop computers and diagnostic hardware to perform work.
* Other duties as assigned by Manager or Supervisor.
QUALIFICATIONS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
* High school diploma or demonstrated equivalent.
* Five years of experience performing Control System / Building Automation/Management System service and repair in a data center, heavy industrial, or pharmaceutical/biomedical environment, or demonstrated equivalent combination of education and experience.
* Knowledge of data center infrastructure including related HVAC and electrical equipment.
* Preferred experience with Tridium Niagara (AX/N4) or other systems such as ALC, Honeywell, Schneider Electric and Siemens and associated instrumentation.
* Experience troubleshooting Control Systems, BAS/BMS systems including but not limited to (Automated Logic, Honeywell, Siemens, Edstrom, etc.)
* Possess knowledge of Building Systems sequence of operations
* Experience diagnosing, troubleshooting and repairing process mechanical systems
* MUST BE A US CITIZEN
Computer Skills:
* Proficient knowledge of Microsoft Office and software
Certificates and Licenses:
* No certificates or licenses required
Supervisory Responsibilities:
* No supervisory responsibilities
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
* While performing the duties of this job, the employee is regularly required to sit; Standing and walking is required. The noise level in the work environment is usually moderate. The employee must occasionally lift and carry up to 50 pounds.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
Benefits to Joining Our Team
CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage
- Health Benefits - (Medical, Dental & Vision Insurance)
- Flexible Spending Account Options
- 401K Plan
- Employer paid Life & Disability Insurance
- Paid Time Off
- Employee Referral Program
- Employee Assistance Program (EAP)
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
Learn more about CPG by checking out our website here
#LI-TG1
Pay Range: $65,013 - $97,580 per year
Apply for this Position
Not Specified
Controls & Integration Engineer III
🏢 CPG
Salary not disclosed
Position:
Controls & Integration Engineer III
Location:
Jessup, MD
Job Id:
789
# of Openings:
1
TITLE: CONTROLS & INTEGRATION ENGINEER V
LOCATION: JESSUP, MD
*Salary Negotiable
POSITION SUMMARY:
Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including industrial controls and power controls and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customer's complex needs.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
Design / Engineering
Programming
Maintenance
Managerial Responsibilities
Estimates
Personnel Management
QUALIFICATIONS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
Computer Skills:
Certificates and Licenses:
* Required Certifications
* Preferred Licenses / Certifications
Supervisory Responsibilities:
* No supervisory responsibilities
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
CPG Participates in E-Verify
Learn more about CPG by checking out our website here
#LI-TG1
Pay Range: $98,891 - $148,392 per year
Apply for this Position
Controls & Integration Engineer III
Location:
Jessup, MD
Job Id:
789
# of Openings:
1
TITLE: CONTROLS & INTEGRATION ENGINEER V
LOCATION: JESSUP, MD
*Salary Negotiable
POSITION SUMMARY:
Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including industrial controls and power controls and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customer's complex needs.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
Design / Engineering
- Initiates design documents for small projects and in support of large programs
- Develops design documents narratives
- Performs requirements analysis
- Develops Sequence of Operations / System Functional Documentation
- Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
- Develops Specifications
- Performs QA/QC and technical reviews of designs
- Plans and Design Procedures and Equipment for Integrated Systems Factory Testing
- Comment Resolution
Mechanical-focused controls engineer (BAS/BMS)
- Experience on EPMS monitoring
- Certifications in Platforms (at least one), familiarity with any others preferred: Ignition, Aveva, Automated Logic, Siemens, Schneider EBO, Niagara N4, Iconics Gen64
- Experience with Federal Government controls projects (ICS/EMCS/UMCS) preferred
- Familiarity with Cisco network switch programming and design preferred
Programming
- Lead programming / configuration team efforts for complex automation and SCADA applications.
- Program / Configure / troubleshoot PLCs, RTUs, and/or HMI systems
- Testing / Troubleshooting / Deployment / Commissioning
- Author testing / commissioning procedures
- Preparation of test reports
- Originates test procedures
- Commissioning of deployed systems
- Development of test equipment and simulation devices
- Perform Factory and Field Testing
Maintenance
- Perform troubleshooting on service calls to existing and legacy system operators
- Perform hardware / software upgrades and replacements on existing systems
Managerial Responsibilities
Estimates
- Conducts any surveys, inspections, tours, etc. of client sites, as required
- Prepares cost estimates and supporting documents for small projects
- Perform hardware / software upgrades and replacements on existing systems
- Evaluation and pricing of change orders
Personnel Management
- Assigns technical tasks and coordinates with entry-level engineers
- Assigns tasks and coordinates with Technical Staff
QUALIFICATIONS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
- Experience in reading electrical and control schematics and plans
- Experience in control system startup, configuration, and calibration
- Experience in testing and troubleshooting control systems
- Experience using basic electrical and machinist hand tools
- Experience using testing, calibration, or industry-specific tools and software
- 3-7 years' experience
- Bachelor's degree in engineering or higher
- Associate degree (add 3 years)
- High school diploma (add 5 years)
- Must be a US Citizen
Computer Skills:
- Experience in computer networks
- Experience in CAD/CAE Software (Visio, AutoCAD)
- Experience in schedule management software
- Standard Office Software (Microsoft Word, Excel, etc.)
Certificates and Licenses:
* Required Certifications
- Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
- Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
* Preferred Licenses / Certifications
- Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
- Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
- Design Build Institute of America (DBIA)
- Engineer in Training (EIT) in relevant in field
Supervisory Responsibilities:
* No supervisory responsibilities
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
CPG Participates in E-Verify
Learn more about CPG by checking out our website here
#LI-TG1
Pay Range: $98,891 - $148,392 per year
Apply for this Position
Not Specified
Critical Systems Technician II, Connected
🏢 CPG
Salary not disclosed
Position:
Critical Systems Technician II, Connected
Location:
19775 Belmont Executive Plaza
Suite 200
Ashburn, VA
Job Id:
951
# of Openings:
1
TITLE: CRITICAL SYSTEMS TECHNICIAN II, CONNECTED
LOCATION: Ashburn, VA
POSITION SUMMARY:
A Critical Systems Technician II, Connected Services is responsible for startups, certifications, preventative maintenance, and scheduled maintenance for battery systems related to Uninterruptable Power Supply systems.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
QUALIFICATIONS:
Education/Experience:
Computer Skills:
Certificates and Licenses:
No supervisory responsibilities
Travel: Approximately 75% or more
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to sit; Standing and walking is required. The noise level in the work environment is usually moderate. The employee must lift and carry up to 50 - 70 pounds. The employee must occasionally lift and move up to 100 pounds.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
Benefits to Joining Our Team
CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage
Learn more about CPG by checking out our website here
*We utilize E-Verify
#LI-TG1
Pay Range: $27.21 - $40.82 per hour
Apply for this Position
Critical Systems Technician II, Connected
Location:
19775 Belmont Executive Plaza
Suite 200
Ashburn, VA
Job Id:
951
# of Openings:
1
TITLE: CRITICAL SYSTEMS TECHNICIAN II, CONNECTED
LOCATION: Ashburn, VA
POSITION SUMMARY:
A Critical Systems Technician II, Connected Services is responsible for startups, certifications, preventative maintenance, and scheduled maintenance for battery systems related to Uninterruptable Power Supply systems.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
- Assist with the battery replacements and new installations.
- Assist, as necessary, with preventative maintenance of batteries with minimal disruption to customer.
- Assist in the warehouse when needed.
- Interact effectively with internal and external customers.
- Follow operational, maintenance and emergency methods of procedure (MOPs)
- Ensure strict adherence to critical facility work rule and safety procedures.
- Ability to use hand and general maintenance tools and equipment.
- Keep job site clean during replacement, installs, and maintenance.
- Assist with work in other service divisions (Switch Gear, Operations, HVAC, etc.) as needed.
- Work from schematic diagrams, sketches, and verbal instructions.
- Learn how todisconnect and connectsealedbatteries in cabinets and open racks.
- Learn how to build flooded cell batteryracks, and spill containment systems.
- Learn how to install flooded cell batteries onto rack systems in thecustomerscritical space.
- Learn how to enter pre-installation test readings into our reporting format thru laptop computer.
- Learn how to collect data from PM services and importinto files for reporting purposes.
- Gain experience from preventive maintenance, trouble diagnosis, routine and emergency maintenance and repairs with minimum direct supervision to DC batterysystems
- Regular and reliable attendance is an essential job function.
- Other duties as assigned by Services Management.
- Travel approximately 75% or more
- Must be US citizen
QUALIFICATIONS:
Education/Experience:
- High School Diploma
- Clean driving records a must
- Safe operation of department equipment
- Elementary fix/repair techniques based on directed supervision
- Knowledge of or ability to learn basic AC/DC theory, electronic components, and electronic circuitry
- Complete training on:
- Use of Digital multimeter for AC and DC diagnostic measurements
- Use of Amp Clamp and flexible CT in DC and AC measures
- Use of AlberCellcorderfor use as a battery testing and maintenance tool for a multitude of various battery designs and chemistries
- Show understanding of proper use of:
- Isolation devices to control available voltage potentials.
- Necessary use of Arc-Flash suit and PPE.
- Show competency in the connections of series, parallel, and series-parallel battery strings.
- Understand torque values, torque-mark application, and visual inspection of completed battery cabinet installations.
Computer Skills:
- Proficient knowledge of Microsoft Office including: Word, Excel.
Certificates and Licenses:
- OSHA 10-hour certification
- NFPA-70E Safety Training
- Supervisory Responsibilities:
No supervisory responsibilities
Travel: Approximately 75% or more
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to sit; Standing and walking is required. The noise level in the work environment is usually moderate. The employee must lift and carry up to 50 - 70 pounds. The employee must occasionally lift and move up to 100 pounds.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
Benefits to Joining Our Team
CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage
- Health Benefits - (Medical, Dental & Vision Insurance)
- Flexible Spending Account Options
- 401K Plan
- Employer paid Life & Disability Insurance
- Paid Time Off
- Employee Referral Program
- Employee Assistance Program (EAP)
- CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
Learn more about CPG by checking out our website here
*We utilize E-Verify
#LI-TG1
Pay Range: $27.21 - $40.82 per hour
Apply for this Position
Not Specified
Critical Systems Technician II, Battery
🏢 CPG
Salary not disclosed
Position:
Critical Systems Technician II, Battery
Location:
Dallas, TX
Job Id:
943
# of Openings:
1
TITLE: CRITICAL SYSTEMS TECHNICIAN II, BATTERY
LOCATION: Dallas, TX (50% Travel)
POSITION SUMMARY:
A Critical Systems Technician II, Battery is responsible for startups, certifications, preventative maintenance, and scheduled maintenance for battery systems related to Uninterruptable Power Supply systems.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
QUALIFICATIONS:
Computer Skills:
Certificates and Licenses:
No supervisory responsibilities
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to sit; Standing and walking is required. The noise level in the work environment is usually moderate. The employee must lift and carry up to 50 - 70 pounds. The employee must occasionally lift and move up to 100 pounds.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
Benefits to Joining Our Team
CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage
Learn more about CPG by checking out our website here
#LI-TG1
Pay Range: $27.21 - $40.82 per hour
Apply for this Position
Critical Systems Technician II, Battery
Location:
Dallas, TX
Job Id:
943
# of Openings:
1
TITLE: CRITICAL SYSTEMS TECHNICIAN II, BATTERY
LOCATION: Dallas, TX (50% Travel)
POSITION SUMMARY:
A Critical Systems Technician II, Battery is responsible for startups, certifications, preventative maintenance, and scheduled maintenance for battery systems related to Uninterruptable Power Supply systems.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
- Assist with the battery replacements and new installations.
- Assist, as necessary, with preventative maintenance of batteries with minimal disruption to customer.
- Assist in the warehouse when needed.
- Interact effectively with internal and external customers.
- Follow operational, maintenance and emergency methods of procedure (MOPs)
- Ensure strict adherence to critical facility work rule and safety procedures.
- Ability to use hand and general maintenance tools and equipment.
- Keep job site clean during replacement, installs, and maintenance.
- Assist with work in other service divisions (Switch Gear, Operations, HVAC, etc.) as needed.
- Work from schematic diagrams, sketches, and verbal instructions.
- Learn how todisconnect and connectsealedbatteries in cabinets and open racks.
- Learn how to build flooded cell batteryracks, and spill containment systems.
- Learn how to install flooded cell batteries onto rack systems in thecustomerscritical space.
- Learn how to enter pre-installation test readings into our reporting format thru laptop computer.
- Learn how to collect data from PM services and importinto files for reporting purposes.
- Gain experience from preventive maintenance, trouble diagnosis, routine and emergency maintenance and repairs with minimum direct supervision to DC batterysystems
- Regular and reliable attendance is an essential job function.
- Other duties as assigned by Services Management.
- Travel approximately 50% or more
- Must be a US citizen
- Able to obtain security clearance is preferred
QUALIFICATIONS:
- High School Diploma
- Clean driving records a must
- Safe operation of department equipment
- Elementary fix/repair techniques based on directed supervision
- Knowledge of or ability to learn basic AC/DC theory, electronic components, and electronic circuitry
- Complete training on:
- Use of Digital multimeter for AC and DC diagnostic measurements
- Use of Amp Clamp and flexible CT in DC and AC measures
- Use of AlberCellcorderfor use as a battery testing and maintenance tool for a multitude of various battery designs and chemistries
- Show understanding of proper use of:
- Isolation devices to control available voltage potentials.
- Necessary use of Arc-Flash suit and PPE.
- Show competency in the connections of series, parallel, and series-parallel battery strings.
- Understand torque values, torque-mark application, and visual inspection of completed battery cabinet installations.
Computer Skills:
- Proficient knowledge of Microsoft Office including: Word, Excel.
Certificates and Licenses:
- OSHA 10-hour certification
- NFPA-70E Safety Training
- Supervisory Responsibilities:
No supervisory responsibilities
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to sit; Standing and walking is required. The noise level in the work environment is usually moderate. The employee must lift and carry up to 50 - 70 pounds. The employee must occasionally lift and move up to 100 pounds.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
Benefits to Joining Our Team
CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage
- Health Benefits - (Medical, Dental & Vision Insurance)
- Flexible Spending Account Options
- 401K Plan
- Employer paid Life & Disability Insurance
- Paid Time Off
- Employee Referral Program
- Employee Assistance Program (EAP)
- CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
Learn more about CPG by checking out our website here
#LI-TG1
Pay Range: $27.21 - $40.82 per hour
Apply for this Position
Not Specified
Critical Systems Technician I, Connected
🏢 CPG
Salary not disclosed
Position:
Critical Systems Technician I, Connected
Location:
21000 Ashburn Crossing Drive
Suite 100
Ashburn, VA
Job Id:
867
# of Openings:
1
TITLE: CRITICAL SYSTEMS TECHNICIAN I, Connected
LOCATION: Ashburn, VA
POSITION SUMMARY:
Pay Range: $22.95 - $34.43 per hour
Apply for this Position
Critical Systems Technician I, Connected
Location:
21000 Ashburn Crossing Drive
Suite 100
Ashburn, VA
Job Id:
867
# of Openings:
1
TITLE: CRITICAL SYSTEMS TECHNICIAN I, Connected
LOCATION: Ashburn, VA
POSITION SUMMARY:
A Critical Systems Technician I, Connected is responsible for delivery of materials, unloading and loading materials from trucks, buildings and other containment structures, ability to transport/move job material throughout customer facilities, assist with job prep, startups, certifications, preventative maintenance, and scheduled maintenance for battery systems related to Uninterruptable Power Supply systems. A clean driving record is required for this role.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
- Assist with the battery replacements and new installations.
- Assist, as necessary, with preventative maintenance of batteries with minimal disruption to customer.
- Assist in the warehouse when needed.
- Interact effectively with internal and external customers.
- Follow operational, maintenance and emergency methods of procedure (MOPs)
- Ensure strict adherence to critical facility work rule and safety procedures.
- Ability to use hand and general maintenance tools and equipment.
- Keep job site clean during replacement, installs, and maintenance.
- Assist with work in other service divisions (Switch Gear, Operations, HVAC, etc.) as needed.
- Following instructions from Supervisors/Lead Technicians.
- Be able to unload and load batteries onto pallets/moving carts
- Package/prepare pallets of batteries for DOT compliant travel to jobs and scrap yards
- Ability and willingness to travel to job sites, do overnight travel, and work nights and weekends, as needed.
- Learntosafely operateequipment including but not limited to:
- Company vans, trucks, stake body truck, and box truck.
- Manual pallet jacks.
- Electric pallet jacks.
- Moving Carts/Dollies
- Forklift.
- Battery lifting tables.
- Pallet shrink wrapping and banding equipment.
- Electric drills/drivers.
- Torque wrench.
- Hand tools.
- AlberCellcorder, Fluke BT521, Megger and Digital Hydrometerfor battery testing.
- Regular and reliable attendance is an essential job function.
- Other duties as assigned by Services Management.
- Travel 30% or more
- Must be a US citizen
- Able to obtain security clearance is preferred
QUALIFICATIONS:
Education/Experience:
- High School Diploma
- Clean driving records a must.
- Requires basic mechanical aptitude
- Elementary fix/repair techniques based on directed supervision.
- Knowledge of or ability to learn basic AC/DC theory, electronic components, and electronic circuitry.
Computer Skills:
- Knowledge of Microsoft Office including: Word, Excel.
Certificates and Licenses:
- OSHA 10-hour certification
- Must have or ability to obtain certification in DOT, First-Aid, CPR, Adult AED
- Pass NFPA-70E Safety training
Supervisory Responsibilities:
- No supervisory responsibilities
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- While performing the duties of this job, the employee is regularly required to sit; Standing and walking is required. The noise level in the work environment is usually moderate. The employee must lift and carry up to 100 pounds on a regular basis.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
Benefits to Joining Our Team
CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage
- Health Benefits - (Medical, Dental & Vision Insurance)
- Flexible Spending
- 401K Plan
- Employer paid Life & Disability Insurance
- Paid Time Off
- Employee Referral Program
- Employee Assistance Program (EAP)
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
Learn more about CPG by checking out our website here
#LI-TG1
Pay Range: $22.95 - $34.43 per hour
Apply for this Position
Not Specified
Critical Systems Technician II, Connected Services
🏢 CPG
Salary not disclosed
Position:
Critical Systems Technician II, Connected Services
Location:
9365 South McKemy St.
Tempe, AZ
Job Id:
942
# of Openings:
1
TITLE: CRITICAL SYSTEMS TECHNICIAN II, BATTERY
LOCATION: Tempe, AZ ( Will require 75% travel)
POSITION SUMMARY:
A Critical Systems Technician II, Connected Services is responsible for startups, certifications, preventative maintenance, and scheduled maintenance for battery systems related to Uninterruptable Power Supply systems.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
QUALIFICATIONS:
Education/Experience:
Computer Skills:
Certificates and Licenses:
No supervisory responsibilities
Travel: Approximately 75% or more
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to sit; Standing and walking is required. The noise level in the work environment is usually moderate. The employee must lift and carry up to 50 - 70 pounds. The employee must occasionally lift and move up to 100 pounds.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
Benefits to Joining Our Team
CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage
Learn more about CPG by checking out our website here
#LI-TG1
Pay Range: $27.21 - $40.82 per hour
Apply for this Position
Critical Systems Technician II, Connected Services
Location:
9365 South McKemy St.
Tempe, AZ
Job Id:
942
# of Openings:
1
TITLE: CRITICAL SYSTEMS TECHNICIAN II, BATTERY
LOCATION: Tempe, AZ ( Will require 75% travel)
POSITION SUMMARY:
A Critical Systems Technician II, Connected Services is responsible for startups, certifications, preventative maintenance, and scheduled maintenance for battery systems related to Uninterruptable Power Supply systems.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
- Assist with the battery replacements and new installations.
- Assist, as necessary, with preventative maintenance of batteries with minimal disruption to customer.
- Assist in the warehouse when needed.
- Interact effectively with internal and external customers.
- Follow operational, maintenance and emergency methods of procedure (MOPs)
- Ensure strict adherence to critical facility work rule and safety procedures.
- Ability to use hand and general maintenance tools and equipment.
- Keep job site clean during replacement, installs, and maintenance.
- Assist with work in other service divisions (Switch Gear, Operations, HVAC, etc.) as needed.
- Work from schematic diagrams, sketches, and verbal instructions.
- Learn how todisconnect and connectsealedbatteries in cabinets and open racks.
- Learn how to build flooded cell batteryracks, and spill containment systems.
- Learn how to install flooded cell batteries onto rack systems in thecustomerscritical space.
- Learn how to enter pre-installation test readings into our reporting format thru laptop computer.
- Learn how to collect data from PM services and importinto files for reporting purposes.
- Gain experience from preventive maintenance, trouble diagnosis, routine and emergency maintenance and repairs with minimum direct supervision to DC batterysystems
- Regular and reliable attendance is an essential job function.
- Other duties as assigned by Services Management.
QUALIFICATIONS:
Education/Experience:
- High School Diploma
- Clean driving records a must
- Safe operation of department equipment
- Elementary fix/repair techniques based on directed supervision
- Knowledge of or ability to learn basic AC/DC theory, electronic components, and electronic circuitry
- Complete training on:
- Use of Digital multimeter for AC and DC diagnostic measurements
- Use of Amp Clamp and flexible CT in DC and AC measures
- Use of AlberCellcorderfor use as a battery testing and maintenance tool for a multitude of various battery designs and chemistries
- Show understanding of proper use of:
- Isolation devices to control available voltage potentials.
- Necessary use of Arc-Flash suit and PPE.
- Show competency in the connections of series, parallel, and series-parallel battery strings.
- Understand torque values, torque-mark application, and visual inspection of completed battery cabinet installations.
- Must be a US citizen
- Able to obtain security clearance is preferred
Computer Skills:
- Proficient knowledge of Microsoft Office including: Word, Excel.
Certificates and Licenses:
- OSHA 10-hour certification
- NFPA-70E Safety Training
- Supervisory Responsibilities:
No supervisory responsibilities
Travel: Approximately 75% or more
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to sit; Standing and walking is required. The noise level in the work environment is usually moderate. The employee must lift and carry up to 50 - 70 pounds. The employee must occasionally lift and move up to 100 pounds.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
Benefits to Joining Our Team
CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage
- Health Benefits - (Medical, Dental & Vision Insurance)
- Flexible Spending Account Options
- 401K Plan
- Employer paid Life & Disability Insurance
- Paid Time Off
- Employee Referral Program
- Employee Assistance Program (EAP)
- CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
Learn more about CPG by checking out our website here
#LI-TG1
Pay Range: $27.21 - $40.82 per hour
Apply for this Position
Not Specified
Electrical Commissioning Agent II
🏢 CPG
Salary not disclosed
Position:
Electrical Commissioning Agent II
Location:
Remote
Job Id:
884
# of Openings:
1
TITLE: ELECTRICAL COMMISSIONING AGENT II
LOCATION: Various Worksites within US/ Remote
POSITION SUMMARY
The Electrical Commissioning Agent II lead with supervision at times and executes commissioning of data center critical systems including generators, switchgears, UPSs, PDUs and various other equipment. This person is responsible for conducting reviews of client design packages, monitoring, and analyzing FAT and First of Kind equipment Level 1 thru 5 tests and developing O&M documentation to serve as a reference for data center electrical equipment. The Data Center Commissioning Engineer is critical in the company's continued success and growth by ensuring that testing has been executed and the client's data centers operate at maximum operational efficiency.
ESSENTIAL DUTIES AND RESPONSIBILITIES
Verify results of test reports; Assist with field troubleshooting of commissioned equipment as needed; Field experience in the operation and application of Power Quality Analyzers, Power Disturbance Analyzers, Data loggers, and related system testing equipment.
QUALIFICATIONS
Experience:
Education:
PHYSICAL DEMANDS AND WORK ENVIRONMENTAL FACTORS
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
*We utilize E-verify
Pay Range: $74,851 - $112,222 per year
Apply for this Position
Electrical Commissioning Agent II
Location:
Remote
Job Id:
884
# of Openings:
1
TITLE: ELECTRICAL COMMISSIONING AGENT II
LOCATION: Various Worksites within US/ Remote
POSITION SUMMARY
The Electrical Commissioning Agent II lead with supervision at times and executes commissioning of data center critical systems including generators, switchgears, UPSs, PDUs and various other equipment. This person is responsible for conducting reviews of client design packages, monitoring, and analyzing FAT and First of Kind equipment Level 1 thru 5 tests and developing O&M documentation to serve as a reference for data center electrical equipment. The Data Center Commissioning Engineer is critical in the company's continued success and growth by ensuring that testing has been executed and the client's data centers operate at maximum operational efficiency.
ESSENTIAL DUTIES AND RESPONSIBILITIES
- Assist with managing projects, plans, provide and gather specifications, and execute assignments in a multidisciplinary engineering Commissioning role for large facility projects.
- The commissioning experts adhere to a thorough quality management/QC process and procedures.
- Participate in daily commissioning activity meetings which services include: Equipment pre-start-up and start-up procedures; Development of standard operating procedures (SOP's) and Methods of Procedures (MOPs); Comprehensive Commissioning documentation.
- Prepare commissioning test procedures and reports with limited supervision as needed; Develop and maintain commissioning logs, equipment checklist, and other tools to track commissioning projects; Write comprehensive reports which include the following sections: recommendations for optimizing building operations, functional checklists, list of deficiencies, equipment operation and maintenance manuals.
- Review design criteria, specifications, drawings, equipment submittals, and other documentation pertinent to commissioning.
- Integrated system testing; Load Bank Testing; Compilation of all testing procedure results.
- Develop and administer functional tests for various systems, such as: electrical distribution systems, UPS, standby generators, etc.
- System Assembly; Commission plan preparation; Follow company QC process and procedures.
- Help lead and manage any external resources; Schedule and direct periodic commissioning meetings; Attend construction and coordination meetings if required for the project.
- Interface with clients, contractors, equipment vendors and owners' agents as needed; Execute project assignments; Interface with project contractors, vendors, and testing technicians; Interact with all facets of the company: engineering, design, etc.
Verify results of test reports; Assist with field troubleshooting of commissioned equipment as needed; Field experience in the operation and application of Power Quality Analyzers, Power Disturbance Analyzers, Data loggers, and related system testing equipment.
QUALIFICATIONS
Experience:
- 3-5 years' experience in the Engineering Field
- A/E experience working in complex facilities or mission critical projects a big plus
- Previous Data Center / Mission Critical experience is preferred
- Electrical equipment testing experience in a Critical Facilities / facility environment
- Experience with IEEE/ASHRAE procedures and protocols a plus
- Possess basic knowledge of systems design for various projects
- Experience using Microsoft Word, Excel, and Microsoft Project
- Excellent communication skills, both written and verbal (this role requires heavy amount of writing, documentation, and client interaction)
- Up to 75% travel
- Must be a US Citizen
Education:
- Bachelor's / Associates Degree in engineering a plus or comparable experience
PHYSICAL DEMANDS AND WORK ENVIRONMENTAL FACTORS
- Occasionally move objects 10-50lbs.
- Frequently required to stand, walk, stoop, kneel, crouch or crawl.
- Occasionally required to sit and climb or balance.
- Specific vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust and focus.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
Benefits to Joining Our Team
CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage
- Health Benefits - (Medical, Dental & Vision Insurance)
- Flexible Spending Account Options
- 401K Plan
- Employer paid Life & Disability Insurance
- Paid Time Off
- Employee Referral Program
- Employee Assistance Program (EAP)
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
Learn more about CPG by checking out our website here
#LI-TG1
*We utilize E-verify
Pay Range: $74,851 - $112,222 per year
Apply for this Position
Not Specified
Data Transformation Developer
🏢 CPG
Salary not disclosed
Position:
Data Transformation Developer
Location:
19775 Belmont Executive Plaza
Suite 200
Ashburn, VA
Job Id:
828
# of Openings:
1
TITLE: DATA TRANSFORMATION DEVELOPER
LOCATION: ASHBURN, VA
POSITION SUMMMARY: The Data Transformation Developer is responsible for developing high-quality data transformations, analytics solutions, dashboards, and reports that enable decision-making across CPG. This role bridges data engineering and analytics, building robust data pipelines in NetSuite Analytics Warehouse (NSAW). Leveraging data from multiple sources to create user-friendly reporting and visualization across all levels of the organization.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
Certificates and Licenses:
Supervisory Responsibilities:
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Benefits to Joining Our Team
CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
Pay Range: $85,996 - $129,050 per year
Apply for this Position
Data Transformation Developer
Location:
19775 Belmont Executive Plaza
Suite 200
Ashburn, VA
Job Id:
828
# of Openings:
1
TITLE: DATA TRANSFORMATION DEVELOPER
LOCATION: ASHBURN, VA
POSITION SUMMMARY: The Data Transformation Developer is responsible for developing high-quality data transformations, analytics solutions, dashboards, and reports that enable decision-making across CPG. This role bridges data engineering and analytics, building robust data pipelines in NetSuite Analytics Warehouse (NSAW). Leveraging data from multiple sources to create user-friendly reporting and visualization across all levels of the organization.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- REQUIRED: NetSuite experience
- PREFERRED: Ability to work with multiple levels within the organization to document and collect requirements and then translate these requirements into intuitive, actionable reporting solutions through NetSuite Analytics Warehouse (NSAW).
- Create standards for reporting, dashboards, and visualization solutions.
- Creates reusable data models that are aligned to governance and department standards.
- Document business definitions, data logic and repot specifications.
- Create standards around change management for data models and NSAW.
- Validate and ensure data accuracy, consistency and reliability across all data models and reporting.
- Create documentation, hands on training and recorded training to increase end user acceptance and engagement.
- Other duties as assigned.
QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
- Bachelor's degree in computer information systems, or related field.
- 5-10 years hands on experience.
- Experience with Power BI, Tableau, NetSuite Analytics Warehouse, or other major Business Intelligence Tools.
- Transforming complex enterprise data into usable models, and visual designs for end users.
- Effective analytical thinking and problem-solving skills, with ability to translate business questions into analytical requirements
- Effective communication skills for partnering with non-technical stakeholders and document, validate and provide quality assurance skills.
- Must be a US Citizen
- Excellent verbal and written communication skills.
- Proficient in Microsoft Office Suite or related software.
- Excellent organizational skills and attention to detail.
- Excellent interpersonal skills.
Certificates and Licenses:
- Microsoft Office Suite or related software.
Supervisory Responsibilities:
- No supervisory responsibilities for this position.
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- Prolonged periods of sitting at a desk and working on a computer.
- Must be able to lift 15 pounds at times.
- Frequently required to stand, walk, stoop, kneel, crouch, or crawl.
Benefits to Joining Our Team
CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage
- Health Benefits - (Medical, Dental & Vision Insurance)
- Flexible Spending Account Options
- 401K Plan
- Employer paid Life & Disability Insurance
- Paid Time Off
- Employee Referral Program
- Employee Assistance Program (EAP)
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
Pay Range: $85,996 - $129,050 per year
Apply for this Position
Not Specified
Sr. MEP Manager
🏢 CPG
Salary not disclosed
Position:
Sr. MEP Manager
Location:
19775 Belmont Executive Plaza
Suite 200
Ashburn, VA
Job Id:
971
# of Openings:
1
TITLE: SR. MEP MANAGER, ELECTRTICAL
LOCATION: Ashburn, VA
POSITION SUMMARY: The Sr. MEP Manager will lead efforts coordinating the trades on major construction projects and work with the Project Team to ensure successful installation and completion of all MEP trade work.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience (Desired):
Computer Skills:
Certificates and Licenses:
Supervisory Responsibilities:
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
*We utilize E-VERIFY
Pay Range: $130,798 - $196,253 per year
Apply for this Position
Sr. MEP Manager
Location:
19775 Belmont Executive Plaza
Suite 200
Ashburn, VA
Job Id:
971
# of Openings:
1
TITLE: SR. MEP MANAGER, ELECTRTICAL
LOCATION: Ashburn, VA
POSITION SUMMARY: The Sr. MEP Manager will lead efforts coordinating the trades on major construction projects and work with the Project Team to ensure successful installation and completion of all MEP trade work.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- Estimate and scope MEP trades during pre-construction (as applicable / future support)
- Review Contract Documents, making suggestions/modifications as they relate to the MEP trades and approved construction drawings and specifications
- Review BOD for MEP compliance
- Review and coordination of submittals and shop drawings
- Act as Energy Marshall in the isolation and energization of all electrical equipment in accordance with the safety plan.
- Assist Superintendent and Field Staff in managing MEP subcontractors throughout duration of the project (from groundbreaking through commissioning and turnover to owner)
- Assist with scheduling MEP installation activities.
- Review, inspect, and provide oversight of construction drawings during MEP installation
- Work with Superintendent on project logistics and temporary facility plans
- Review and comment on scope, material, and equipment for MEP systems prior to installation
- Monitor the installation and start-up of MEP systems and commissioning of project with Engineer & Owner
- Inspect MEP installation during construction.
- Review Coordination and Arc Flash studies
- Review and provide field verification of torque and meggar reports provide by trades, and assure reports are submitted during final turnover.
- Coordinate activities, materials procurement and other related activities with Project Superintendent and Field Staff
- Communicate progress and prepare appropriate reports as needed (Procore)
- Represent SE MCS regarding the MEP process at weekly Owners and contractors' meetings.
- Mentor project staff, if applicable
- Lead and direct the coordination process to resolve all conflicts during installations and start-up
- Perform other duties as assigned.
- Schedule shifts may incl nights/weekends as per bell curve requirements
- Significant travel required for this role - 50% (rotating two or three weeks on project site and one week working remote)
QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience (Desired):
- Bachelor's/Associates Degree a plus or comparable experience in mechanical, electrical or fire protection/life safety engineering, construction management.
- Construction trade specific experience with increasing levels of responsibility and demonstrated abilities to direct the work of others.
Computer Skills:
- Proficient in Microsoft Office or related software, Procore preferred.
Certificates and Licenses:
- Supervises subordinate employees. Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems.
- Occasionally lift and/or move up to 25 pounds, and ability to bend, stoop, kneel, crouch, or crawl. Frequent use of hands to fingers, and ability to reach with hands and arms. Specific vision abilities required include close vision, ability to adjust focus, and ability to see color. Requires eye-hand coordination and manual dexterity sufficient to operate office equipment. Requires normal range of hearing and eyesight to record, prepare and communicate written or online documentation. Involves contact with other individuals. Frequent sitting, standing, and walking. Work is performed primarily indoors.
Supervisory Responsibilities:
- No supervisory responsibilities
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- While performing the duties of this job, the employee is regularly required to sit; Standing and walking is required. The noise level in the work environment is usually moderate. The employee must occasionally lift and carry up to 50 pounds.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
Benefits to Joining Our Team
CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage
- Health Benefits - (Medical, Dental & Vision Insurance)
- Flexible Spending Account Options
- 401K Plan
- Employer paid Life & Disability Insurance
- Paid Time Off
- Employee Referral Program
- Employee Assistance Program (EAP)
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
*We utilize E-VERIFY
Learn more about CPG by checking out our website here
#LI-TG1
Pay Range: $130,798 - $196,253 per year
Apply for this Position
Not Specified
jobs by
✓ All jobs loaded