Cornerstone Controls Locations Jobs in Usa

The Broward County Board of County Commissioners is seeking qualified candidates for Mosquito Control Inspector(Highway & Bridge Maintenance Division).
THIS JOB ANNOUNCEMENT WILL REMAIN OPEN UNTIL SUFFICIENT NUMBER OF APPLICATIONS ARE RECEIVED AND MAY CLOSE AT ANY TIME.


The Mosquito Control Inspector for the Highway and Bridge Maintenance Division is an hourly position that engages in routine field inspection work in the control and extermination of mosquitoes. Incumbent is responsible for mosquito control and surveillance activities to aid the County's larvicide and adulticide programs.
Work involves responsibility for making inspections of suspected mosquito breeding places in residential and rural areas. Work follows established routines with specific instructions received from superiors on all new assignments. Work includes collecting and identifying mosquito species in the field, recording all daily activities, updates data, and reports mosquito problems to supervisor as needed in a timely manner. Incumbent utilizes appropriate control method(s), applies the control method(s) in accordance with the applicable laws and Broward County policy. Work is reviewed by the incidence of public complaints against mosquito nuisance and field inspections by supervisors. This position involves routine and frequent exposure to toxic/caustic chemicals. The ability to wear an appropriately-fitted respirator mask and other personal protective equipment are requirements for this position.
***This position requires availability to work night-time, daytime and weekends as needed with notification to changes in schedule sometimes being provided with less than 24 hours' notice***

General Description
Routine field inspection work in the control and extermination of mosquitoes.
Works under close to general supervision according to set procedures, but determines how or when to complete tasks.
Minimum Education and Experience Requirements
Requires six (6) months in handling pesticide and some knowledge of public health pest control or closely related experience.
Special Certifications and LicensesPublic Health Applicators License issued by State of Florida must be obtained within six (6) months of employment.

Must possess and maintain a valid Florida Class E Driver's License for duration of appointment.

Preferences

• Associates degree or higher in Biology, Entomology or related field
• Training certification in mosquito biology and control techniques
• Class A or B valid Florida Commercial Driver's License
• FAA Part 107 Certificate (Drone Pilot License)
• 1+ years of experience using larvicide equipment and turbine sprayer (i.e., calibration of equipment, measuring/mixing, loading and testing of biological larvicide materials, such as Vectobac or similar products).
• 1+ years of experience with Surveillance and Testing activities (i.e., setting up traps, dip sampling, larval counts, data collection and analysis)
• 1+ years of experience working with Geographic Information Systems (GIS).
• 1+ years of experience with repair/maintenance of mosquito control equipment.
• 1+ years of experience with supporting aerial mosquito control operation.

The functions listed below are those that represent the majority of the time spent working in this class. Management may assign additional functions related to the type of work of the job as necessary.

Makes systematic daily checks of assigned area in the salt marshes during mosquito breeding periods; inspects ditches at regular intervals to determine incidence of mosquito breeding; determines breed of mosquito and the stage of the breeding process; keeps constant watch to prevent new breeding areas from developing; watches for incoming flights of adult mosquitoes.

Makes site inspections in an assigned residential area; identifies him/herself to residents; looks for containers holding water, pools, elevator shafts, sumps, and other places where mosquitoes could breed; calls undesirable situations to the attention of the occupant or owner; keeps work records of inspections made; makes count of adult mosquitoes at established stations throughout the County; drives spray truck and operates spraying machinery; operates equipment to combat early stages of mosquitoes.

Answers public complaints regarding annoyances by mosquitoes; determines the breed of mosquito involved and locates breeding places in the area; takes routine corrective measures as indicated.

Confers with superiors in the analysis of scientific and procedural problems involved and works out plans to abate or prevent the development of mosquito nuisance; assigns and supervises subordinate mosquito inspectors in various areas of the County; prepares and maintains survey maps.

Advises the public on methods and procedures to prevent mosquito breeding and to abate mosquito nuisance.

Orders, issues, and maintains adequate stock levels of supplies and equipment.

Performs related work as assigned.

Physical Demands

Physical demands refer to the requirements for physical exertion and coordination of limb and body movement.

Performs light work that involves walking or standing most of the time and involves exerting up to 20 pounds of force on a regular and recurring basis, or skill, adeptness and speed in the use of fingers, hands or limbs on repetitive operation of mechanical or electronic office equipment or tools within moderate tolerances or limits of accuracy.

Unavoidable hazards refer to the job conditions that may lead to injury or health hazards even though precautions have been taken.

Involves routine and frequent exposure to toxic/caustic chemicals.

Competencies

• Decision Quality

• Action Oriented

• Plans and Aligns

• Ensures Accountability

• Drives Results

• Communicates Effectively

• Courage

• Manages Ambiguity

• Collaborates: Building partnerships and working collaboratively with others to meet shared objectives.
• Customer focus: Building strong customer relationships and delivering customer-centric solutions.
• Instills trust: Gaining the confidence and trust of others through honesty, integrity, and authenticity.
• Values differences: Recognizing the value that different perspectives and cultures bring to an organization.

• 
  
• Design / Engineering
  
  • 
    
  • Assists Senior Engineers in design documents for SCADA/Automation projects
    
    • 
      
    • Developing design document narratives
      
    • Perform requirements analysis
      
    • Understanding of Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field TestingMaintenance
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor's degree in electrical or mechanical engineering and 2-5 years field experience
  
• Associate degree in the electrical or mechanical field (add 3 years field experience)
  
• High school diploma (add 5 years field experience)
  
• 2-5 years' experience with designing and servicing controls systems for chiller plants, complex air distribution equipment, equipment installation, and testing
  
• Experience in reading mechanical and control schematics
  
• Experience in building automation systems (BAS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with test equipment and test equipment software
  
• Experience with networking design, configuration, and troubleshooting
  
• Experience with air handlers, chiller plant systems and data center CRAC units
  
• Ability to travel up to 80%
  
• MUST BE A US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, JCI, ALC, Distech, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

Project Controls Engineer 4

Location: Los Alamos, NM (Onsite)

Schedule: 9/80 Work Schedule

Pay Rate: $85/hr – $91/hr

Assignment Duration: 1 Year

Positions Available: 2

Position Overview

We are seeking an experienced Project Controls 4 to support project execution activities at Los Alamos National Laboratory (LANL). This role provides senior-level expertise in project planning, scheduling, cost engineering, and Earned Value Management (EVMS) to ensure successful delivery of complex technical projects.

The ideal candidate will have extensive experience in project controls systems, cost estimating, schedule development, and financial analysis, with the ability to identify cost and schedule trends and provide actionable recommendations to project leadership.

This position works under consultative direction and may provide technical oversight and leadership for project controls teams, ensuring compliance with project objectives, schedules, and financial targets.

Key Responsibilities

• Support and maintain the Earned Value Management System (EVMS) and project controls processes.
• Perform cost estimating, cost analysis, cost control, and financial reporting activities for complex projects.
• Develop, maintain, and monitor project schedules, ensuring alignment with project milestones and deliverables.
• Identify cost and schedule trends and provide analysis and recommendations to project leadership.
• Supervise or provide technical direction for planning, scheduling, and cost engineering activities.
• Prepare and review cost reports, schedule analysis, and project performance metrics.
• Support project organizational and administrative activities including budget tracking and performance monitoring.
• Provide innovative solutions to cost and schedule challenges on complex technical projects.
• Develop advanced concepts, techniques, and standards to improve project control performance.
• Collaborate with cross-functional teams to ensure project objectives are achieved on time and within budget.

Required Qualifications

• Bachelor’s degree in Engineering, Construction Management, Project Controls, or related field.
• 12+ years of related project controls experience or equivalent combination of education and experience.
• Strong experience with cost estimating, cost control, and financial analysis for large projects.
• Demonstrated experience with schedule development, monitoring, and analysis.
• Experience supporting EVMS-based project environments.
• Strong analytical, organizational, and communication skills.
• Proficiency with Microsoft Office (Excel, Word, and related tools).
• Ability to work independently and provide leadership on complex project assignments.

Preferred Qualifications

• Experience working in DOE, NNSA, or federal project environments.
• Prior experience supporting engineering, construction, or technical programs.
• Experience working as a Control Account Manager (CAM) or supporting project budgets and financial reporting systems.
• Knowledge of project financial status reporting and earned revenue tracking.

Work Environment

• Onsite position located in Los Alamos, NM.
• 9/80 work schedule.
• Work performed in a non-secure area with no clearance required for start.
• Position supports project activities within the PC organization at LANL.

Equal Opportunity Employer

COMPA Industries is an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other protected characteristics.

Notice to Recruiting Agencies

COMPA Industries does not accept unsolicited resumes from third-party recruiting agencies.

No C2C or agency submissions will be accepted.

Job Description

Main Responsibilities: • Develop electrification control solutions at both component and system levels for a broad range of applications using a model‑based design approach. • Evaluate control designs through analysis, simulation, Hardware‑in‑the‑Loop (HIL) testing, laboratory testing, and field testing. • Interface with stakeholders to develop control system requirements that support vehicle electrification solutions. • Conduct electric drive and vehicle system simulations to support control system development and vehicle performance assessments.

Show Less

Additional Skills & Qualifications

What Skills You Need: • 2 or more years of experience in power electronics or control algorithm development. • Proficiency in MATLAB, Simulink, and Simscape. • Experience simulating power electronics, electric machines, and/or control systems. • Effective written and verbal communication skills (English). • Relevant academic research experience will be equally considered. What Makes You Stand Out: • Hands-on laboratory or vehicle testing experience with power electronics or electric motors. • Experience with Hardware-in-Loop testing. • Experience with auto-code generation and embedded software implementation on microcontrollers and FPGAs. • Working knowledge of version control and Agile software development • Experience with advanced research topics. • Experience with power electronics hardware or software design. • Experience with advanced control systems and techniques such as observers, model predictive control, filter design, etc. • Experience with power electronics control and electric motor control. • M.S. degree in Electrical Engineering, Physics Engineering, or Mechanical Engineering with a focus on power electronics and/or control systems. Education: • Minimum of a B.S. degree in Electrical Engineering, Mechanical Engineering, or Physics.

Project Controls Analyst – San Ramon

Are you ready to make an impact in the Power industry?

Join PTAG, a leading Project Management Advisory & Services firm, recognized across North America for helping world-class clients deliver major capital projects successfully.

We are seeking a Project Controls Analyst to support our growing team in San Ramon, CA. In this role, you’ll play a key part in driving project excellence, collaborating with industry leaders, and ensuring high-quality outcomes across complex initiatives.

About PTAG

At PTAG, we help our clients plan, manage, and execute their most challenging projects with innovation, integrity, and collaboration.

Our mission is to help our clients achieve successful delivery and efficient operation of their capital projects.

Our vision is to support global leaders in the selection, planning, and execution of their major initiatives.

Our values include:

• Safety: The safety of our employees, suppliers, and clients is always the top priority.
• Collaboration: We build true partnerships with clients and service providers.
• Leadership: We elevate project performance through the application of best practices.
• Accountability: We take responsibility for every aspect of our engagements.
• Client Satisfaction: We strive for 100% satisfaction on every project.
• Integrity: We believe in open and transparent communication at all levels.

Role & Responsibilities

• In this role, you will: In this role, you will support the successful delivery of capital infrastructure projects through effective schedule management, cost control, and performance reporting.

Schedule Management

• Develop and maintain integrated project schedules using Primavera P6
• Monitor schedule progress, identify critical path impacts, and perform schedule updates
• Support schedule analysis including forecasting, variance identification, and milestone tracking

Cost Control & Forecasting

• Perform cost analysis, forecasting, and budget tracking across project workstreams
• Support Estimate at Completion (EAC) and Estimate to Complete (ETC) processes
• Track project expenditures and support cost reporting aligned with project budgets

Earned Value & Performance Reporting

• Support Earned Value Management (EVM) processes including CPI/SPI performance analysis
• Prepare weekly and monthly project performance reports, including dashboards, KPIs, progress curves, and cost/schedule trends
• Provide data-driven insights to support project decision-making

Project Controls Integration

• Collaborate with Project Managers, engineering teams, contractors, and stakeholders to align project plans, progress updates, and forecasts
• Supporting integrated project controls processes across schedule, cost, risk, and change management

Change & Risk Management

• Support change control processes, evaluating impacts to project scope, cost, and schedule
• Assist with risk identification, analysis, and contingency planning
• Maintain documentation supporting project controls governance and reporting requirements

Qualifications / Requirements

• To succeed in this role, you bring: Bachelor’s degree in Engineering, Construction Management, Finance, or a related discipline
• 5+ years of project controls experience supporting capital infrastructure projects
• Experience supporting Power Transmission & Distribution (T&D) and substation projects
• Strong proficiency in Primavera P6 and Microsoft Excel
• Experience with cost management platforms such as SAP, EcoSys, Prism, or similar systems
• Solid understanding of Earned Value Management (EVM) and project performance metrics
• Strong analytical, problem-solving, and attention-to-detail capabilities
• Excellent communication and stakeholder collaboration skills

Preferred Qualifications

• Professional certifications such as PMP, AACEI (CCP, PSP), or similar
• Experience supporting utility or regulated infrastructure programs
• Familiarity with integrated project controls within large capital project environments

Salary Range for Role $ 105,000 - $110,000

Compensation at PTAG varies depending on a wide array of factors, which may include but are not limited to the specific office location, role, skill set and level of experience.

Why Join PTAG?

At PTAG, you’ll be part of a dynamic, growing consulting firm that values professional development, collaboration, and innovation.

• Opportunity to work on major infrastructure and capital projects. Exposure to industry-leading clients and partners.
• Competitive compensation and comprehensive benefits package.
• Flexible work environment and opportunities for advancement.
• Employee Share Purchase Plan (ESPP).
• A culture that values safety, accountability, and excellence.

PTAG is proud to be an equal opportunity employer committed to fostering a diverse and inclusive workplace.

PTAG uses AI-enabled tools to support certain aspects of the recruitment process, including reviewing applications against job-related criteria. These tools are used to assist our recruiters. All hiring decisions are made by PTAG recruiters and hiring managers.

NR Consulting is currently seeking a highly motivated Senior Control System Engineer for an opportunity in Aurora, OH – Onsite!

Position Title: Senior Control System Engineer

Location: Aurora, OH – Onsite

Anticipated Start Date: 04/13/2026

Please note this is the target date and is subject to change. NR consulting will send official notice ahead of a confirmed start date.

Job Type: Fulltime Permanent Role/Direct Hire

Salary Range: $90K - $130K/annum plus benefits

Please note that actual compensation may vary within this range due to factors such as location, experience, and job responsibilities, and does not encompass additional non-standard compensation (e.g., benefits, paid time off, per diem, etc.).

Job Description:

We are seeking a Central Utility Controls Engineer to join the engineering team of a leading industrial automation and manufacturing organization. In this role, you will support the design, development, testing, and implementation of control systems for large-scale utility and plant support applications using modern automation platforms.

The position involves working closely with engineering and project teams to deliver reliable automation solutions supporting facility infrastructure and industrial utility systems.

Key Responsibilities:

• Develop functional specifications and control documentation, including sequence of operations and system documentation.

• Collaborate with electrical design teams to support control panel and system drawing packages.

• Program, test, and deploy PLC, DCS, and HMI control systems for industrial utility applications.

• Develop and support system testing procedures, including factory and site acceptance testing.

• Assist with system commissioning, start-up activities, and validation during project deployment.

• Provide technical guidance and training to internal teams and end users when required.

• Troubleshoot and support existing automation systems to ensure optimal performance and reliability.

Required Qualifications:

• Bachelor’s degree in Engineering or a related technical discipline from an accredited institution.

• 3–6 years of experience in industrial controls, automation, or related engineering roles.

• Experience working with industrial automation platforms such as PLC, DCS, and HMI systems.

• Familiarity with industrial communication protocols commonly used in automation environments.

• Experience supporting industrial utility or process control systems is highly valued.

• Ability to travel approximately 25% for project meetings, site visits, and commissioning activities.

Preferred Qualifications:

• Professional Engineer (PE) license or progress toward licensure.

• Experience leading technical project tasks or small engineering teams.

• Additional experience in industrial automation or process systems is a plus.

About NR Consulting

Founded in 2005, NR Consulting is a leading global provider of workforce solutions, technology services, and recruitment strategy, trusted by Fortune 500 and mid-sized organizations across North America, Europe, and Asia. Headquartered in Boulder, Colorado, with a Global Delivery Center in India, NR Consulting partners with clients to drive innovation, accelerate business outcomes, and deliver scalable talent solutions across industries such as engineering, information technology, energy, life sciences, and manufacturing.

With a strong belief in the power of people and performance, NR Consulting has built a reputation for excellence in direct hire, contract staffing, and project-based consulting. Our commitment to integrity, diversity, and client success has enabled us to consistently deliver top-tier professionals who help businesses achieve their strategic and operational goals.

Guided by our core values — People First, Accountability, Excellence, and Partnership — we take pride in fostering long-term relationships with clients and candidates alike. Our multicultural teams work collaboratively across geographies to provide agile, high-quality, and results-driven solutions that make a measurable difference.

NR Consulting is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

This posting is not an offer of employment. All applicants applying for positions in the United States must be legally authorized to work in the United States. The submission of intentionally false or fraudulent information in response to this posting may render the applicant ineligible for the position. Any subsequent offer of employment will be considered employment at-will regardless of the anticipated assignment duration.

Project Controls (EVMS SME)

Number of Positions: 1

Location: Savannah River Site (SRS) – Aiken, SC (100% Onsite)

Citizenship: U.S. Citizenship Required

Clearance: Ability to obtain DOE Q clearance (Active L/Q strongly preferred)

Work Schedule: 4x10s (Mon–Thurs, 6:00am–4:30pm)

Pay Rate: $80/hr – $90/hr

Impact

This is not a standard Project Controls role. We are seeking a senior-level EVMS Subject Matter Expert who can lead project controls strategy on complex DOE capital projects. You will directly influence cost, schedule, and execution performance across high-visibility programs, partnering with senior leadership to drive data-informed decisions and corrective actions.

What Sets This Role Apart

• High visibility with senior DOE and site leadership
• Ownership of full lifecycle project controls execution
• Leadership across complex, multi-project EVMS environments
• Requires a true dual-expert in Primavera P6 and Cobra

Core Responsibilities

• Lead and own the Project Controls function for major project scopes
• Develop and maintain fully resource-loaded, logic-driven schedules in Primavera P6
• Drive EVMS performance including CPI/SPI analysis, variance reporting, and corrective actions
• Utilize Cobra for cost processing, earned value, and financial reporting
• Perform deep-dive variance analysis and present insights to executive stakeholders
• Establish and maintain project baselines (scope, cost, schedule)
• Lead forecasting, risk analysis, and change control (BCPs, trends)
• Facilitate cost and schedule reviews with senior leadership
• Mentor project controls teams and enforce best practices
• Integrate cost, schedule, and technical data across multiple systems

Required Qualifications (Strict Requirements)

• Bachelor’s degree in Engineering, Construction Management, Business, or related field (or equivalent experience)
• 10–15+ years of progressive Project Controls experience on large, complex projects
• Demonstrated experience supporting DOE, NNSA, or comparable nuclear / federal programs
• Proven ability to operate as a lead or SME in EVMS environments

Critical Must-Have Expertise (Non-Negotiable)

Primavera P6 (Advanced / Expert)

• 10+ years hands-on experience
• Expert in resource loading, baseline development, and critical path analysis
• Experience managing large, integrated schedules

Cobra (Advanced / Expert)

• 8–10+ years experience
• Deep expertise in cost processing, EVMS reporting, and variance analysis
• Experience integrating Cobra with scheduling systems

EVMS (Expert Level)

• Extensive experience with ANSI/EIA-748 compliant EVMS
• Proven performance managing cost/schedule metrics at scale
• Strong experience with BCPs, change control, and forecasting

Project Controls Systems Mastery

• Advanced knowledge of cost, scheduling, and financial systems integration
• Expertise in forecasting, performance tracking, and reporting

Highly Preferred (Strong Differentiators)

• Active DOE L or Q Clearance
• DOE 413.3 capital project experience
• Experience with enterprise tools (e.g., Empower, Success)
• Background in nuclear, EPC, or large-scale construction environments

Top Candidate Profile

• Recognized EVMS and Project Controls SME
• Strong in both scheduling (P6) AND cost (Cobra)
• Comfortable presenting to executive leadership
• Experienced in highly regulated environments (DOE/NNSA)
• Proactive in identifying issues and driving corrective action

Top 10 Attributes (Condensed)

1. Primavera P6 (Expert)
2. Cobra (Expert)
3. EVMS SME (ANSI/EIA-748)
4. DOE / NNSA Experience
5. Resource-Loaded Scheduling
6. Cost & Schedule Variance Analysis
7. Forecasting & Planning
8. Change Control (BCPs)
9. Leadership & Mentorship
10. Executive Communication

Additional Information

• No C2C (Corp-to-Corp) engagements
• No third-party recruiting agencies or submissions

Equal Opportunity Employer (EOE)

COMPA Industries is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

GEICO is seeking a visionary and strategic HR 1st Line of Defense Control/Risk Director to drive risk management and controls across our Human Resources (HR) functions. This high-impact role is designed for an initiative-taking leader who excels in partnership, thrives in collaborative environments, and brings a strong action-oriented approach. The ideal candidate will champion a process mindsetidentifying enhancement and re-engineering opportunities and leveraging AI and automation to deliver efficiency and effectiveness in key HR activities. Most importantly, this leader will demonstrate a \"can do\" mentality, focused on \"getting to yes\" and breaking down barriers to achieve solutions that align with both risk management objectives and business priorities.

This hybrid role requires on-site presence three days per week at one of GEICO's office locations: Chevy Chase, MD; Chicago, IL; Dallas, TX; or New York, NY.

• Strategic Partnership: Build and nurture strong relationships across HR, business units, and Technology functions to seamlessly integrate risk management into HR initiatives.
• Risk-Based Approach: Understand and prioritize business needs, applying a risk-based mindset to HR processes and controls.
• Process Mindset & Innovation: Advocate for process improvement, actively seeking opportunities for enhancement, re-engineering, and leveraging AI or automation to maximize efficiency and effectiveness.
• Can Do Mentality & Getting to Yes: Approach challenges with optimism, persistence, and resourcefulnessalways striving to find practical solutions and drive consensus that aligns business objectives with risk mitigation.
• Continuous Improvement: Deliver ongoing transformation within HR controls, supporting business growth and compliance through innovative process changes.
• Governance and Compliance: Develop, implement, and maintain policies and procedures that fulfill regulatory requirements and uphold internal standards.
• Team Leadership: Build, guide, and empower a collaborative team focused on designing, monitoring, and remediating HR controls.
• Stakeholder Communication: Clearly and effectively communicate risk events, issues, and process updates to HR leadership, the Audit Committee, and external auditors.
• Training and Awareness: Lead educational sessions for HR staff on risk management, controls, and compliance.

• Bachelor's degree in human resources, business, finance, or a related field; or equivalent relevant experience.
• 8+ years of experience in risk management, internal controls, or compliance, preferably within HR or large, complex organizations.
• Demonstrated partnership and collaboration skills, with the ability to influence stakeholders across diverse functions.
• Initiative-taking, action-oriented mindset with a focus on results and continuous improvement.
• Process-driven, with the ability to propose and implement enhancement opportunities, including re-engineering and AI/automation.
• Excellent written and verbal communication skills, with the ability to distill and present complex issues clearly.
• Strong prioritization skills for thriving in fast-paced, changing environments.

• Master's degree in HR, business, or finance (HR certifications or risk management credentials are a plus).
• Experience with data analysis, process automation, or HR analytics.
• Background in SOX compliance, forensic audit, or control design relating to HR.

This is an exceptional opportunity to join GEICO during a period of transformationleading impactful change in HR risk management, promoting a culture of \"getting to yes,\" and helping shape the future of our organization.

Annual Salary $146,575.00 - $229,600.00. The above annual salary range is a general guideline. Multiple factors are taken into consideration to arrive at the final hourly rate/annual salary to be offered to the selected candidate. Factors include, but are not limited to, the scope and responsibilities of the role, the selected candidate's work experience, education and training, the work location as well as market and business considerations.

At this time, GEICO will not sponsor a new applicant for employment authorization for this position.

The GEICO Pledge:

Great Company: At GEICO, we help our customers through life's twists and turns. Our mission is to protect people when they need it most and we're constantly evolving to stay ahead of their needs.

We're an iconic brand that thrives on innovation, exceeding our customers' expectations and enabling our collective success. From day one, you'll take on exciting challenges that help you grow and collaborate with dynamic teams who want to make a positive impact on people's lives.

Great Careers: We offer a career where you can learn, grow, and thrive through personalized development programs, created with your career and your potential in mind. You'll have access to industry leading training, certification assistance, career mentorship and coaching with supportive leaders at all levels.

Great Culture: We foster an inclusive culture of shared success, rooted in integrity, a bias for action and a winning mindset. Grounded by our core values, we have an established culture of caring, inclusion, and belonging, that values different perspectives. Our teams are led by dynamic, multi-faceted teams led by supportive leaders, driven by performance excellence and unified under a shared purpose.

As part of our culture, we also offer employee engagement and recognition programs that reward the positive impact our work makes on the lives of our customers.

Great Rewards: We offer compensation and benefits built to enhance your physical well-being, mental and emotional health and financial future.

• Comprehensive Total Rewards program that offers personalized coverage tailor-made for you and your family's overall well-being.
• Financial benefits including market-competitive compensation; a 401K savings plan vested from day one that offers a 6% match; performance and recognition-based incentives; and tuition assistance.
• Access to additional benefits like mental healthcare as well as fertility and adoption assistance.
• Supports flexibility- We provide workplace flexibility as well as our GEICO Flex program, which offers the ability to work from anywhere in the US for up to four weeks per year.

The equal employment opportunity policy of the GEICO Companies provides for a fair and equal employment opportunity for all associates and job applicants regardless of race, color, religious creed, national origin, ancestry, age, gender, pregnancy, sexual orientation, gender identity, marital status, familial status, disability or genetic information, in compliance with applicable federal, state and local law. GEICO hires and promotes individuals solely on the basis of their qualifications for the job to be filled.

GEICO reasonably accommodates qualified individuals with disabilities to enable them to receive equal employment opportunity and/or perform the essential functions of the job, unless the accommodation would impose an undue hardship to the Company. This applies to all applicants and associates. GEICO also provides a work environment in which each associate is able to be productive and work to the best of their ability. We do not condone or tolerate an atmosphere of intimidation or harassment. We expect and require the cooperation of all associates in maintaining an atmosphere free from discrimination and harassment with mutual respect by and for all associates and applicants.

As an Inventory Control Supervisor, you will lead and oversee inventory control operations in a 3PL warehouse environment. Your role is critical in minimizing inventory discrepancies and supporting operational efficiency.

Major Duties and Responsibilities:

• Ensure all products are properly accounted for and inventory levels are maintained with the highest degree of accuracy.
• Supervise inventory control staff, coordinate warehouse operations, and collaborate with management to develop and enforce inventory control policies, procedures, and best practices.
• Supervise daily inventory control activities including counting, recording, and verifying stock levels.
• Lead efforts to identify, investigate, and resolve inventory discrepancies and root cause issues.
• Ensure accurate and timely updates to inventory records in warehouse management systems (WMS).
• Schedule and oversee regular cycle counts and full inventory audits.
• Generate, analyze, and present reports on inventory levels, variances, and trends.
• Train, coach, and evaluate inventory control staff to ensure compliance with procedures and improve performance.
• Collaborate with warehouse leadership to align inventory practices with operational goals.
• Develop and implement continuous improvement strategies to enhance inventory accuracy and efficiency.
• Maintain a clean, safe, and organized inventory area in accordance with company standards.
• Comply with the requirements of the company's Quality Management System.

Required Skills, Experience, and Education:

• High school diploma
• 2-4+ years of experience in inventory control, warehouse operations, or logistics industry
• Supervisory or leadership experience
• Proficient with warehouse management systems (WMS) and inventory control software

Desired Skills, Experience, and Education:

• Strong leadership and team management capabilities.
• Excellent analytical and problem-solving skills.
• Ability to perform and oversee mathematical inventory calculations and data analysis.
• Proficient in Microsoft Office Suite and other relevant software applications.
• Strong written and verbal communication skills.
• Ability to prioritize tasks, multitask effectively, and work under pressure.
• High attention to detail and commitment to accuracy.
• Understanding safety standards and regulatory compliance related to inventory management.

Physical Requirements:

• Lift, carry, and move materials up to 50 pounds
• Remain in a stationary/seated position for an extended period.
• Regularly required to operate a computer, telephone, keyboard, and other office machinery.
• Specific vision abilities required by this job include close vision requirements due to computer work.
• The ability to hear, understand, and distinguish speech and/or other sounds.

Pegasus Logistics Group is breaking the mold and we want employees as passionate and diverse as we are.

Pegasus Logistics Group is an equal opportunity employer and we value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status or disability status.

The Middlesex Corporation is a nationally recognized and award-winning leader in the heavy civil construction industry. Since 1972, the family business founded by Robert W. Pereira has developed an extensive client and project list through its consistent efforts to safely build America's infrastructure. The Middlesex Corporation specializes in building and reconstructing highways, bridges, marine, rail, and transit facilities through its collaborative team approach and focus on core values. In addition, Middlesex Asphalt in Central Florida is one of the largest and most productive asphalt plants in the United States with Middlesex Paving earning an equally solid regional presence and reputation.

Position Summary:

We are seeking an experienced Quality Control Technician with proven leadership skills and a devoted work ethic who is looking for a successful career and the opportunity to grow with The Middlesex Corporation, a rapidly growing, successful, and well-established heavy civil infrastructure company. As a Quality Control Technician, you will play a critical role in the overall leadership and successful and timely delivery of complex multimillion-dollar fast-track, complex heavy-civil, highway, and bridge projects from the pre-construction stage through project execution and completion.

Responsibilities:

• Comply with and actively promote all Safety policies and procedures, including reporting accidents, incidents, and near-misses to uphold the company's core value of "Safety first."
• Actively participate in overall day-to-day operational leadership and decision-making as the subject matter expert for all project quality management functions, including self-performed work, materials, or work performed by suppliers, vendors, subcontractors.
• Provide ongoing and regular quality control-related technical input for construction planning, interpretation of design, development of efficient construction methods, and quality control processes for execution of the work.
• Manage and schedule all required quality testing, inspections and documentation including all third-party quality control related services.
• Manage the quality processes required per contract documents, specifications, drawings, engineering calcs for work activities such as crane/hoisting lifts, temporary works, falsework, shoring, formwork, safety systems, etc.
• Provide overall leadership to ensure work is constructed in compliance and work quality is accurately documented through clear and traceable record keeping and reporting.
• Develop and implement project specific Quality Control Plan that meets company policies, project requirements and is aligned with industry standards and best practices. Perform periodic audits to verify adherence to QA/QC Management Plan.
• Develop a comprehensive working knowledge of project contract documents, (drawings and specifications, and requirements by reference, etc.
• Maintain applicable industry reference standards and facilitate project access to relevant team members.
• Develop and implement a project Quality Control orientation program to ensure project team members are familiar with the requirements of the project QC Management Plan, and conduct to relevant project specific training, relative to Quality Control roles, responsibilities, processes, and procedures.
• Contribute to interpretation and dissemination and communication of project quality control requirements to relevant, staff including field crews and craft supervision.
• Assist in document management to ensure all project documents are updated and current to reflect any changes, revisions, etc.
• Assist in the procurement, buy-out, and management of subcontractors, suppliers/vendors to ensure subcontract /vendor agreements capture required quality related scope of work.
• Prepare and submit accurate Quality Control project status project reports.
• Manage project submittal process to ensure timely receipt, review and approval of submittals and shop drawings, as-builts, and other required documentation.
• Actively participate in RFI process to ensure timely receipt, review, response close out.
• Monitor project work for any non-compliance issues and ensure corrective measures are approved, executed and closed out with documented acceptance.
• Manage project close-out including, timely management of punch list, commissioning, and transitional system operations turnover.

Qualifications:

• Four-year engineering or construction management degree or equivalent combination of technical training and relevant experience.
• Minimum of two (2) years of documented experience performing in a construction quality control management role on a heavy civil construction rail project.
• Comprehensive understanding of construction industry practices and standards, as well as experience with supervision, estimating, scheduling, budget preparation, and project status reporting.
• Experience utilizing project management software systems.
• Currently possess or can attain the NETTCP Quality Assurance Technologist and USACE Construction Quality Manager Certification.
• Heavy-Civil construction experience.

Necessary Attributes:

• Ability to adapt to different personalities and management styles to create a cohesive team environment.
• Strong interpersonal skills, fostering effective communication and collaboration.
• Ability to work efficiently within a team, maintaining high levels of productivity and teamwork.
• Self-starter with excellent verbal and written communication skills.
• Strong reliance on experience and judgment to plan and achieve goals effectively.
• Dedicated, hardworking, and committed to quality standards.
• Exceptional organizational skills and attention to detail.

We offer our full-time and eligible part time team members a comprehensive benefits package that's among the best in our industry. Benefits include medical, dental and vision plans covering eligible team members and dependents, employee assistance programs, life insurance, disability, top-tier 401k with matching, tuition reimbursement, industry leading referral program, and generous paid time off.