Core Mark Jobs in Usa

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment.Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I, IIand  Senior Biomed as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment.Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I, IIand  Senior Biomed as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment.Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I, IIand  Senior Biomed as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

150 Kid Ellis Rd, Mulberry, FL 33860

FL085 Single Customer Store Part-time Shift(s): MON TUE WED THU FRI 7:00am - 5:00pm 10 - 28 hours/week

OVERVIEW:

Working as Part-time Customer Supply Chain Support, you will engage in a variety of activities to support the customer's supply chain in order to improve the performance of the onsite business. This is an entry level position where you will build a foundation of experience in customer relationship management and operations. This position may offer a flexible schedule after a period of onboarding, training, and meeting performance goals.

RESPONSIBILITIES:

The duties and responsibilities of this position include, but are not limited to:

• Responding and coordinating resources relative to customer requests
• Managing inventory
• Placing and fulfilling orders
• Receiving and shipping inventory
• Executing inventory fulfillment within the customer facility
• Sourcing and quoting new and existing products
• Participating in continuous improvement activities and implementing new business processes
• Monetizing and reporting the value of supply chain management activities to the customer

REQUIRED POSITION QUALIFICATIONS:

The following skills and qualifications are required for this position:

• 18 years of age or older, due to the nature of work
• Possess or are working towards a degree in Supply Chain/Operations Management OR have equivalent industry experience and knowledge of the local market
• Excellent written and oral communication skills
• Proficient computer skills
• Demonstrate strong math aptitude, attention to detail and sense of urgency
• Highly motivated, self directed and customer service oriented
• Be comfortable in a sales-oriented environment
• Demonstrate our core values of ambition, innovation, integrity and teamwork
• Lift, slide, carry and lower packages that typically weigh 25lbs-50lbs and may weigh up to 75lbs
• Pass the required drug screen (applicable in the US, Puerto Rico and Guam ONLY)

PREFERRED POSITION QUALIFICATIONS:

Possess a current full valid driver's license issued in the country where the job is located (including successful completion of any applicable graduated license program for your state or province) as well as the ability to meet our driving record requirements to use a company vehicle, as needed

ABOUT US:

Since 1967 Fastenal has grown as a distributor of industrial and construction supplies from a single branch to a Fortune 500 company with over 3,000 servicing locations, each providing tailored local inventory and personal service for our customers. As we've expanded across the world, we've retained a core belief in people and their ability to accomplish remarkable things - if given the opportunity. From this philosophy stems an entrepreneurial culture that challenges every employee to run their own business, create their own success, and advance to become company leaders. As a growth company with a solid financial position, we are committed to training, promoting from within, and creating opportunities for our employees. If you have an entrepreneurial spirit and are looking to make your mark as part of an elite growth company, you won't find a better fit than Fastenal.

PART-TIME BENEFIT:

Fastenal offers a 401(k) with an employer contribution.

Embark on your journey as a Part-time Fulfillment Specialist, where you'll take charge of delivering excellence by replenishing inventory solutions and managing our industry leading vending program. If you thrive on being on the move, this role offers a dynamic local route, servicing customer needs daily. From making deliveries, to performing replenishments of our managed inventory programs, and maintaining equipment, you'll be at the forefront of our innovative solutions. This position is for our branch located at 507 Highland Ave, Iowa City, IA 52240.

The duties and responsibilities of this position include, but are not limited to:

• Making deliveries with a company vehicle to fulfill inventory at customer sites
• Performing replenishment and general maintenance of vending equipment
• Interacting with our customers while making deliveries
• Placing and fulfilling orders at customer sites
• Performing other duties as needed to ensure branch success

The following skills and qualifications are required for this position:

• 18 years of age or older, due to the nature of work
• Possess a current full valid driver's license issued in the country where the job is located (including successful completion of any applicable graduated license program for your state or province) as well as the ability to meet our driving record requirements to use a company vehicle, as needed
• Proficient written and oral communication skills
• Proficient computer skills
• Learn and perform multiple tasks in a fast paced environment
• Demonstrate strong organization, planning and prioritizing abilities
• Highly motivated, self directed and customer service oriented
• Demonstrate attention to detail and strong sense of urgency
• Work independently as well as in a team environment
• Demonstrate our core values of ambition, innovation, integrity and teamwork
• Lift, slide, carry and lower packages that typically weigh 25lbs-50lbs and may weigh up to 75lbs
• Pass the required drug screen (applicable in the US, Puerto Rico and Guam ONLY)
• Pass a sex offender registry check, required by a customer/contract serviced by this location

Our mission within Fastenal's School of Business is to collaboratively maximize the potential of each employee by consistently providing efficient, effective, and engaging learning opportunities to drive improved work performance. The experience includes on-the-job, online, instructor led classroom and virtual trainings which will equip you with the knowledge, skills and strategies to be successful in your role and grow with the company.

Since 1967 Fastenal has grown as a distributor of industrial and construction supplies from a single branch to a Fortune 500 company with over 3,000 servicing locations, each providing tailored local inventory and personal service for our customers. As we've expanded across the world, we've retained a core belief in people and their ability to accomplish remarkable things - if given the opportunity. From this philosophy stems an entrepreneurial culture that challenges every employee to run their own business, create their own success, and advance to become company leaders. As a growth company with a solid financial position, we are committed to training, promoting from within, and creating opportunities for our employees. If you have an entrepreneurial spirit and are looking to make your mark as part of an elite growth company, you won't find a better fit than Fastenal.

Fastenal offers a 401(k) with an employer contribution.

Department: Production

Employment Type: Full Time

Location: New York - Huntington Station

Reporting To: Kitchen Manager

Compensation: $22.50 - $27.15 / hour

• 
  
• Quickly prepare and accurately log ingredients, rotate stations on the fly and properly operate all equipment for production
  
• Ability to operate under current state guidelines including compliant storage and handling of all products
  
• Maintain high-quality standards during shifts including constant QA/QC of all products being prepped and produced
  
• Ability to work well with others in high-pressure situations with a sense of urgency
  
• Effectively communicate and respond to questions/suggestions from various levels within the company
  
• Maintain and comply with sanitation and safety standards.
  
• Maintain a clean and organized kitchen and work environment
  
• Perform visual quality inspections on products, minimize waste where possible
  
• Assist with Packaging responsibilities as required
  
• Other duties, responsibilities and activities may change or be assigned at any time with or without notice
  

• 
  
• To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
  
• Experience: At least 6 months of directly related experience and/or training in a food production or kitchen environment; or equivalent combination of education and experience. Must be able to understand and comply with kitchen sanitation and safety regulations. Must have experience working with a high sense of urgency in a team environment or independently
  
• Computer Skills: Proficiency with Microsoft Excel, Word, and Outlook
  
• Must obtain all state required: permits, licenses, certifications
  
• ServSafe Food Handlers Card preferred
  
• Willing to submit to a background check
  
• Must be able to effectively communicate in English, both verbally and written
  
• Possess basic mathematical skills: addition, subtraction, multiplication and division
  
• State regulations require all applicants must be 21 years of age or older
  
• #Wyldjobs
  

Salary

Embark on a dynamic journey as a Full-time Supply Chain Associate, where every day offers a new opportunity to immerse yourself in the world of supply chain excellence. In addition to managing inventory, you'll play a pivotal role in supporting business-to-business operations by administering procurement, sourcing, and quoting functions that seamlessly meet the needs of our customers and drive the success of their business.

This position is for our branch located at 75 Acco Dr, York, PA 17402. This position may offer a flexible schedule after a period of onboarding, training, and meeting performance goals.

The duties and responsibilities of this position include, but are not limited to:

• Managing branch inventory levels
• Administering procurement functions, including purchase orders and backorder management
• Estimating/quoting prices and sourcing product
• Coordinating resources to respond to customer supply chain needs
• Supporting accounts receivable activities
• Making deliveries with a company vehicle as necessary
• Performing other duties as needed to ensure branch success

The following skills and qualifications are required for this position:

• 18 years of age or older, due to the nature of work
• Possess a current full valid driver's license issued in the country where the job is located (including successful completion of any applicable graduated license program for your state or province) as well as the ability to meet our driving record requirements to use a company vehicle, as needed
• Possess or are working towards a degree in Business, Supply Chain, Operations, Management, Marketing, Sales or related field of study OR have customer service or industry related work experience
• Excellent written and oral communication skills
• Proficient computer skills
• Highly motivated, self directed and customer service oriented
• Demonstrate strong math aptitude, attention to detail and sense of urgency
• Demonstrate strong organization, planning and prioritizing abilities
• Exhibit strong problem solving, deductive reasoning and decision making skills
• Demonstrate our core values of ambition, innovation, integrity and teamwork
• Lift, slide, carry and lower packages that typically weigh 25lbs-50lbs and may weigh up to 75lbs
• Pass the required drug screen (applicable in the US, Puerto Rico and Guam ONLY)
• Successfully pass a post offer pre-employment drug screen, background check, and previous employment verification, required by a customer/contract serviced by this location

Our mission within Fastenal's School of Business is to collaboratively maximize the potential of each employee by consistently providing efficient, effective, and engaging learning opportunities to drive improved work performance. The experience includes on-the-job, online, instructor led classroom and virtual trainings which will equip you with the knowledge, skills and strategies to be successful in your role and grow with the company.

Since 1967 Fastenal has grown as a distributor of industrial and construction supplies from a single branch to a Fortune 500 company with over 3,000 servicing locations, each providing tailored local inventory and personal service for our customers. As we've expanded across the world, we've retained a core belief in people and their ability to accomplish remarkable things - if given the opportunity. From this philosophy stems an entrepreneurial culture that challenges every employee to run their own business, create their own success, and advance to become company leaders. As a growth company with a solid financial position, we are committed to training, promoting from within, and creating opportunities for our employees. If you have an entrepreneurial spirit and are looking to make your mark as part of an elite growth company, you won't find a better fit than Fastenal.

Fastenal offers a competitive benefits package to all full-time employees. This package includes Health, Life, Long Term Disability, and Dental Insurance, in addition to, paid vacation, sick leave, holidays, and 401(k) with an employer contribution.

Title: Fulfillment Associate, Full Time, Donut Shift (Sun, Mon, Thurs, Fri - 8 am - 630 pm)

Location: Bethlehem, PA

If you're looking to be at the forefront of disrupting the ecommerce industry, wanting to make your mark and be continuously challenged to grow, your time has come.

ShipBob is recognized as #1 on Crain's 2020 \"Fast 50\" list of the fastest-growing companies in Chicago & Inc.5000 top 500 companies with the most proven track records. With this growth, we are looking for top talent to help us reach the next level.

We are looking for dedicated team members to join our Weekend Shift; Saturday, Sunday, and Monday from 6 am-6:30 pm with overtime as needed which may occur on the 4th day of the week. If 3-12 hour shifts sound good to you, please keep reading!

Role Description:

Our Associates work together as a team to deliver an incredible experience for our customers every day. Dedication and commitment to excellence will set you apart as a candidate and set you up for success within our fast-growing company. At ShipBob there is a huge opportunity for career growth as we are invested in each and every employee's success in their career.

About Us:

ShipBob is a tech enabled 3PL that partners with over 4,200+ e-commerce businesses to help them be more successful online. We offer a full suite of fulfillment solutions for our merchants, including the ability to improve their transit times, shipping costs and deliver best in class experience to their customers. With almost 100% accuracy rate in fulfilling orders and orders shipped on time, our merchants can count on us to deliver excellent service.

ShipBob's growing fulfillment network is powered by our proprietary technology and acts as a back office for logistics, providing merchants with full visibility into orders, inventory levels in real time, and access to advanced analytics, over 27 integrations and data reporting.

As one of the fastest growing tech companies in Chicago with over $130M+ raised from blue-chip investors like Menlo Ventures, Bain Capital Ventures, Hyde Park Venture Partners and SoftBank Vision Fund 2, our goal is to continue to be the #1 best fulfillment technology in the industry. To help us meet this standard, we are scaling our entire team and looking for people who share our core values and have an entrepreneurial mindset

About You:

At ShipBob, we're looking for individuals who embody our core values:

* Be Mission-Driven. We want team members that are passionate about helping entrepreneurs improve their business, and bring that passion every day.

* Be Humble. We have ambitious goals, and our team members understand that success or failure depends on us working together and leaving egos at the door.

* Be Resilient. Logistics is a complicated business. So is software. We value team members that never give up and keep iterating until a problem is solved.

* Be a Creative Problem Solver. As a startup, we value smart, innovative solutions to complex problems. We fall in love with the problem, not our \"favorite\" solution.

* Be Safety Minded. It's not just talk; it's the way you work.

What You'll Do:

As an associate you will be working within one of several teams:

* Receiving: This team accepts our customers' new inventory and owns the entire process of getting that inventory put away and accepted into our system. The responsibility of communicating the arrivals and any exceptions are receiving owned as well.

* Picking: Spread across two different processes our picking team is responsible for delivering products to the next stage of the process quickly and accurately. An integral team in the warehouse, pickers and their peers keep the flow of customers products moving and keep the warehouse humming.

* Packing: The final touches before a customer receives their products, the packing team is responsible for ensuring the quality of each and every shipment as well as packing the items correctly. The packing team works together with picking to guarantee that shipments are fulfilled perfectly and owns all responsibility around those shipments.

* Other Duties as Required: We are a team which means you will be asked to help out in other areas out of your normal day to day responsibilities to ensure the operations are running efficiently.

What You'll Bring To The Table:

* Able to work scheduled shifts including overtime, and/or weekends based on business needs and consistently arrive for work on time

* Ability to lift up to 50 lbs without restriction

* Able to stand and walk continuously during and up to a 8-10 hr shift

* Able to bend, stoop, reach above, and push/pull frequently

* May be required to help out in other departments as needed

* You're willing to get your hands dirty to get a task completed

* You have the ability to adapt to change quickly

* You are extremely detailed oriented

* Ability to quickly understand new processes and identify operational opportunities

* You're looking to get your foot in the door with a rapidly growing start-up company

* Previous warehouse experience is not required. You will go through a 7 day training program!

* Must be 18 or older

We recognize that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please still consider applying. Diversity of experience and skills combined with passion is a key to innovation and excellence; therefore, we encourage people from all backgrounds to apply to our positions.

Perks and Benefits:

* Medical, Dental, Vision & Basic Life Insurance

* Variety of voluntary benefits, such as: short term disability

* Weekly paycheck with paid overtime eligibility

* $500 Quarterly Perfect Attendance Bonus Potential

* Pay progression program

* KinderBob Daycare Stipend program

* Paid Time Off & Sick Time Off

* Referral Bonus Program

* Fun Culture >>> Check us out on Instagram

Reports to: Area Manager

Classification: Hourly/Non-Exempt

ShipBob provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.