Conduit Pipe Jobs in Usa

The Journeyman Plumber is responsible for installing and repairing all phases of plumbing systems; potable water, sanitary water and vent, natural gas and storm drainage systems in accordance with local and state plumbing and building codes.

Responsibilities include:

• Layouts pipe systems hanger and equipment from drawings and job specifications.
• Installs all plumbing systems and supports by using approved job drawings and manufacturer's instructions.
• Installs lavatories, toilets, urinals, and cafeteria plumbing fixtures.
• Installs drinking fountains.
• Installs storm drainage systems.
• Installs sanitary sewer systems and potable water systems.
• Practices on the job safety.
• Identifies obstructions to be avoided by inspecting structure.
• Complies with federal, state, and local building and plumbing codes by enforcing adherence to requirements.
• Keeps plumbing equipment and tools operational by following manufacturer's instructions and established procedures.
• Maintains safe and clean working environment by complying with all Company and site specific safety procedures, rules, and regulations.
• Be able to test all plumbing systems per job specifications.

Qualifications include:

• High School Diploma or GED.
• 8 or more years of experience and meets requirements.
• Successful completion of an appropriate, formal training program or apprenticeship.
• Licensed to practice as a Journeyman Plumber in the state where you will be working.
• Familiarity with all relevant techniques and tools needed to perform your duties.
• Clearly understand and comply to company/job safety requirements. (OSHA).
• Must have knowledge, certification and ability to perform First aid, CPR and Emergency rescue if ever necessary.
• Effective verbal and written communication skills.
• Knowledge of testing plumbing systems to identifying leaks.
• Knowledge of basic safety, ADA Requirements, and state and local building / plumbing codes.
• Ability to install PVC, ABC, no-hub, service weight, copper sweat, copper pro press systems pex pipe and Victaulic piping systems.
• Knowledge of city and national plumbing codes.
• Ability to read and comprehend design drawings.
• Ability to layout using approved job drawings.
• Ability to operate some types of plumbing equipment.
• Ability to use special tools and equipment.
• Effective verbal and written communication skills.
• Detail-oriented and willing to tackle various ongoing projects in a fast-paced environment.
• Versed in the industry and the Company's competitors.
• Ability to multitask and perform duties outside of the scope of work when necessary.

Preferred Education, Experience, and Qualifications:

• 5 year as commercial plumber.
• 5 years as residential plumber.

Travel Requirements:

• 0-5% of time will be spent traveling to job site(s)/office location.

Physical/Work Environment Requirements:

• Ascending and descending ladders, stairs, scaffolding, ramps, and/or poles.
• Climbing stairs.
• Moving self in different positions to accomplish tasks in various environments including tight and confined spaces.
• Repeating motions that may include the wrists, hands and/or fingers.
• Operating machinery and/or power tools.
• Outdoor elements such as precipitation, heat, cold, and/or wind.
• Noisy environment.
• Light to heavy work that includes adjusting and/or moving objects from 20-100 pounds.

Pay Range:

USD $27.92 - USD $37.29 /Hr.

ENFRA is proud to be an Equal Opportunity Employer of Minorities, Women, Protected Veterans, and Individuals with Disabilities, and participates in the e-Verify program. All qualified applicants will receive consideration for employment without regard to race, creed, color, religion, sex, age, sexual orientation, gender identity, national origin, veteran status, disability, or any other classification protected by law.

Are you an experienced boiler installation professional looking to take the next step in your career? Chapman Bros. is seeking a highly skilled Lead Boiler Installer Technician to join our growing team in Cranford, NJ. With more than 50 years of delivering top-quality heating services to residential customers, Chapman Bros. has built a reputation for excellence, professionalism, and customer-focused service.

As a Lead Boiler Installer, you will bring your 10+ years of expertise to oversee, install, and commission boiler systems with precision and leadership. If you're ready to elevate your career with a company that values craftsmanship, teamwork, and continued growth, we'd love to hear from you!

• Install, replace, and commission residential boiler systems, including steam, hot water, and high-efficiency units
• Configure and optimize hydronic heating systems, including piping, pumps, zone controls, and venting
• Perform system start-up, testing, and calibration to ensure safe and efficient operation

• Serve as the lead technician on installation projects, directing team members and coordinating onsite workflow
• Train junior installers on proper techniques, safety procedures, and installation standards

• Diagnose and resolve issues related to boilers, burners, controls, and overall system performance
• Identify potential installation complications and recommend effective solutions

• Clearly explain boiler replacement or installation processes to homeowners
• Provide system operation guidance and ensure customer satisfaction upon project completion

• Use ServiceTitan (or similar software) to document installation details, track materials, and update job status
• Maintain accurate and organized records in compliance with company and regulatory standards

• Ensure all installations meet local, state, and national mechanical and building codes
• Adhere to strict safety protocols for equipment handling, combustion safety, and jobsite practices

• Provide expert recommendations on boiler types, efficiency options, and system upgrades
• Stay informed on emerging technology, energy-efficient equipment, and industry best practices

• 10 years of experience installing and commissioning HVAC/boiler systems
• Strong working knowledge of hydronic systems, steam systems, venting, circulators, controls, and piping
• Experience leading installation teams or serving in a senior installer role
• Ability to read and interpret blueprints, schematics, and manufacturer specifications
• Licensing: Valid HVAC or related license in the state of New Jersey preferred
• EPA Certification: EPA Type II or Universal Certification required
• Gas piping certification or equivalent experience strongly preferred
• Experience with ServiceTitan or similar service-management software is a plus

Other Requirements

• Excellent communication and customer-service skills
• Strong problem-solving ability and attention to detail
• Leadership mindset with the ability to mentor and support team members
• Professional, reliable, and safety-focused
• Valid driver's license with a clean driving record
• Ability to lift 50+ lbs and work in attics, basements, crawlspaces, and other residential environments

Join our team at Chapman Bros. and become part of a company that values both its customers and employees. Apply today to start your career with a leading home services provider and be part of the Apex Service Partners network!

Chapman Bros. may conduct a pre-employment background check and drug test, subject to applicable laws.

Chapman Bros. is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Florida Solar Energy Center:

The Florida Solar Energy Center (FSEC), is the state's premier energy research institution. Created by the Florida Legislature in 1975 to advance research, development and education in solar energy, FSEC's focus includes renewable energy, energy efficiency, and sustainable transportation research, demonstration, and education.FSEC is administered by the University of Central Florida and is located in Cocoa, Florida.

The Opportunity:

FSEC invites applications for an Undergraduate Summer Research Internship focused on low-carbon methanol production from fugitive methane resources. This internship will take place at M2X Energy Inc. (Rockledge, Florida), where the intern will collaborate with both researchers and industry engineers. All research and hands-on activities will occur at this off-campus sponsor facility.

Responsibilities:

This program focuses on supporting activities related to process development, optimizations and designs of portable, modular gas-to-methanol technologies in partnership with M2X Energy Inc., which involves, but is not limited to:

• 
  

• Development and review of Process Flow Diagrams (PFDs) and Piping & Instrumentation Diagrams (P&IDs).

  
  

• Creation and support of CAD drawings for equipment layouts, skid assemblies, and process components.

  
  

• Design, assembly, and experimentation with benchtop instruments, including data acquisition and analysis.

  
  

• Basic process control support and maintenance of engineering and manufacturing documentation.

  
  

• Assembly, modification, and operation of flow reactors and adsorption testing systems (such as breakthrough rigs) to generate data for pressure swing adsorption (PSA) modeling and validation.

  
  

• Participation in chemical laboratory experiments and processes, including but not limited to testing adsorbent materials to enhance methane recovery from renewable natural gas streams.

  
  

• Preparation of written and oral reports summarizing experimental results, processes, and findings.

  
  

Minimum Qualifications:

Enrollment or recent completion in an engineering or science undergraduate program and basic proficiency in one or more of the following: chemical engineering, mechanical engineering, electrical engineering, or chemistry with scientific lab work.

Preferred Qualifications:

• 
  

• Experience with process diagrams and CAD software (AutoCAD, SolidWorks, or similar) and interpreting or drafting Piping and Instrumentation Diagrams (P&ID).

  
  

• Hands-on experience in bench-scale instrumentation development and experimentation.

  
  

• Familiar with piping assembly, fittings, and gas cylinder handling.

  
  

• Track records with detailed documentation of experimental procedure, SOPs plus good data management skills.

  
  

• Familiarity with data processing, analysis and computing tools such as Excel, Origin, MATLAB and Python.

  
  

• Interest in manufacturing, process engineering and clean technology processes.

  
  

• Hands-on aptitude and comfortable working in a shop, laboratory and/or manufacturing environment.

  
  

• Strong communication skills and awareness of other technical staff, external partners, equipment/instrument manufacturers, etc.

  
  

Special Instructions to the Applicants:

This internship requires on-site participation at M2X Energy's site located at 270 Barnes Boulevard Rockledge, FL 32955.

Desired starting date: Early May 2026.

Applicant must be authorized to work for any U.S. employer, as sponsorship is not available for this position now or in the future.

For questions regarding the position, please contact Dr. Francis Chukwunta () and/or Dr. Veronica Rigo ( ).

Are you ready to unleash YOUR potential?

As a next-generation public research university and Forbes-ranked top employer in Florida, we are a community of thinkers, doers, creators, innovators, healers, and leaders striving to create broader prosperity and help shape a better future. No matter what your role is, when you join Knight Nation,you'llplay an integral role at one of the most impactful universities in the country.You'llbe met with opportunities to connect and collaborate with talented faculty, staff, and students across 12colleges and multiple campuses, engaging in impactful work that makes a positive difference. Your time at UCF will provide you with many meaningful opportunities to grow,you'llwork alongside talented colleagues on complex projects that will challenge you and help you gain newskillsandyou'llhave countless rewarding experiences that go well beyonda paycheck.

AreBenefitsImportant to You?

StateBenefitseligibility for OPS employees are subject to criteriaestablishedby the State of Florida. The state's benefits administrator, People First,determineseligibility and coordinates enrollment. If this position becomes eligible for statebenefitsthe employee will be notified directly by People First.OPS positions are not entitled topaidtime off.

Unless explicitlystatedon the job posting, it is UCF's expectation that an employee of UCF willresidein Florida as of the date the employment begins.

Additional Requirements related to Research Positions:

Pursuant toFlorida State Statute 1010.35, prior to offering employment to certain individuals in research-related positions, UCFis required toconductadditionalscreening. Applicants subject to additional screening include any citizen of a foreign country who is not a permanent resident of the U.S., or who is a citizen or permanent resident but is affiliated with or has had at least 1 year of education, employment, or training in China, Cuba, Iran, Russia, North Korea, Syria, or Venezuela.

Theadditionalscreening requirements only apply to research-related positions, including, but not limited to faculty, graduate positions, individuals compensated by research grants or contract funds, postdoctoral positions, undergraduate positions, visiting assistant professors, and visiting research associates.

Department

Hours of Work

Work Schedule

Type of Appointment

Hourly Rate

Job Posting End Date

Benefits Eligibility

State Benefits eligibility for OPS employees are subject to criteria established by the State of Florida. The state's benefits administrator, People First, determines eligibility and coordinates enrollment. If this position becomes eligible for state benefits the employee will be notified directly by People First. OPS positions are not entitled to paid time off.

As a Florida public university, the University of Central Florida makes all application materials and selection procedures available to the public upon request.

UCF is proud to be a smoke-free campus and an E-Verify employer.

an accommodation due to a disability is needed to apply for this position, please call or email .

For general application or posting questions, please email .

We are looking for an Experienced Service Plumber of at least 4 years of experience with a clean driving record. Must have open availability due to on call emergency which will be rotated between employees. You will Need to provide your own hand tools.

As a Service plumber, you will be responsible for diagnosing, repairing, and installing plumbing systems in residential and commercial buildings, including tasks like fixing leaks, clearing drain clogs, replacing faucets, repairing water heaters, and installing new plumbing fixtures, while maintaining excellent customer service by explaining repairs and addressing client concerns, all while adhering to local building codes and safety regulations.

· Read blueprints and drawings to understand or plan the layout of plumbing, waste disposal and water supply systems.

· Cut, assemble and install pipes and tubes with attention to existing infrastructure (e.g. electrical wiring)

· Install and maintain water supply systems.

· Locate and repair issues with water supply lines (e.g. leaks)

· Repair or replace broken drainage lines, clogged drains, faucets etc..

· Install and maintain gas and liquid heating systems (air-conditioning units, radiators etc.)

· Install waste disposal and sanitary systems with well-functioning DWV systems.

Requirements and skills

· Proven experience as a plumber

· Provide your own hand tools

· Solid understanding of water distribution and disposal systems in residential, commercial and industrial buildings

· Working knowledge of heating and ventilation systems as well as appliances

· Ability to handle plumbing tools and equipment (pipe wrenches, pipe cutters, plungers etc.)

· Good communication and interpersonal skills

· Friendly with a great deal of patience

· Good physical condition and strength with the ability to work in awkward spaces

· Valid Driving license

· Clean Driving Record

· Pass Background Check

· Able to pass Drug test

PM20 PM21

PI991aa48e4231-38

Summary:

The main function of a controls engineer is to initiate control system design from written sequences of operation. A typical controls engineer is responsible for designing complex piping and wiring diagrams along with providing technical support across various control systems projects.

Job Responsibilities:

• Engineer and design pneumatic piping diagrams.

• Engineer and design electrical wiring diagrams.

• Engineer and design hydraulic piping diagrams.

• Design electrical control panels.

• Design programmable logic controller software.

• Design programmable human machine interface (HMI) software.

• Tryout, debug and provide start-up support for control systems.

• Provide technical support for installation of tools and equipment.

• Provide technical support for training of plant personnel.

• Travel to plant sites as required.

Skills:

• Proficient with application of programmable machine controls hardware and software.

• Proficient with application of Servo drive hardware and software.

• Proficient with AutoCad.

• Familiarity with basic electrical standards.

• Familiarity with basic safety standards.

• Capable of supervision.

Education/Experience:

• Bachelor’s Degree in a technical field.

• 5-7 years of experience required.

The Role

As a Civil Designer, you’ll be the engine behind our site plan sets. You won’t just be "drawing"; you’ll be building intelligent Civil 3D models, solving grading puzzles, and navigating the complexities of utility and drainage design. You’ll work hand-in-hand with Project Managers and Engineers to transform concepts into permit-ready construction documents.

Key Responsibilities

• Design & Drafting: Prepare comprehensive civil site plan sets, including site layout, grading, drainage, paving, utilities, and erosion control.
• Modeling Mastery: Build and maintain Civil 3D models using surfaces, feature lines, corridors, and pipe networks; perform earthwork quantities and basic takeoffs.
• Hydraulic Support: Assist with drainage design (inlet checks, pipe sizing, and detention layouts) and assemble calculations for submittals.
• Project Integration: Interpret surveys, plats, and geotechnical reports to create accurate base maps and incorporate multi-disciplinary redlines.
• Regulatory Navigation: Ensure all designs meet QA/QC standards, ADA accessibility, fire codes, and specific jurisdictional requirements.
• Permitting & Construction: Prepare submittal packages, respond to jurisdictional comments, and provide RFI or as-built support during the construction phase.

Qualifications

• Experience: ~5 years of dedicated civil/site design experience, specifically within the commercial or education sectors (retail, banks, schools).
• Software Expertise: High proficiency in AutoCAD Civil 3D (Surfaces, Grading Tools, Pipe Networks, and Xrefs).
• Technical Knowledge: Strong understanding of site drainage, utility layout, and the typical organization of a 60/90/100% plan set.
• Compliance: Ability to read and apply municipal standards, ADA requirements, and local site codes.
• Education: A.S. or B.S. in Civil Engineering, Drafting/Design Technology, or equivalent professional experience.

Preferred Skills

• Experience with hydrology/hydraulics software (Civil 3D SSA, StormCAD, etc.).
• Familiarity with SWPPP/NPDES exhibits and submittal workflows.
• Proficiency in Bluebeam Revu and Microsoft 365.

Project Engineer- Hybrid

Our Client is seeking a highly motivated and experienced Project Engineer with a strong background in sewer conveyance design and pipeline/manhole rehabilitation to join their growing team. As a Project Engineer, you will directly contribute to the planning, design, and construction of water and wastewater infrastructure projects, with a specific focus on sewer pipeline and manhole rehabilitation. This role offers the opportunity to function as a lead engineer and/or assistant project manager on complex sewer rehabilitation challenges.

Your Responsibilities:

• Serve as Project Engineer and/or Design Manager with full technical responsibility for planning, coordination, and execution of tasks for small or larger projects.
• Preparation of contract specifications and drawings.
• Planning, design and construction of new pipelines (pressure and gravity) and manholes or rehabilitation projects ranging in diameters and material type including condition assessment and prioritization and rehabilitation of existing pipelines.
• Pipe design calculations to determine pipe size, pressure class, external loads including trench design, pipe joint selection, etc.
• Technical expertise in the layout and profiles of pipeline design in AutoCAD Civil 3D.
• Utility investigations and coordination to determine and resolve potential vertical and horizontal utility conflicts.
• Knowledge of subsurface and geotechnical engineering requirements.
• Field surveying project requirements.
• Sewer system evaluation surveys; inflow/infiltration studies.
• Development and review of technical reports, proposals, contract documents, resources studies, and data analysis.
• Office and field engineering support during construction.

Requirements

• NASSCO certification (preferred but not required)
• Bachelor of Science in Civil Engineering (BSCE) required.
• Professional Engineer (PE) license Preferred.
• Minimum of 5 years of progressive experience in civil engineering, with a focus on conveyance systems.
• Strong understanding of trenchless technologies
• Experience with the design and construction of water and wastewater infrastructure projects.
• Excellent communication, interpersonal, and presentation skills.
• Ability to work independently and as part of a team.
• Proficiency in AutoCAD and other relevant design software.
• Experience with project management principles and practices.

• 
  
• Assembly and disassembly of pumps in shop.
  
• Completion of comprehensive inspections of pumps and components.
  
• Identification of the cause(s) of mechanical/electrical pump failures & recommend corrective action.
  
• Daily maintenance of department equipment and tools.
  
• Record and monitor each order's labor and material.
  
• Ensure and control safety and quality assurance at all times.
  
• Inventory functions, to include stocking, pulling parts, and conducting inventory audits under direction.
  
• May be required to assist service mechanics in field repair.
  
• Be environmentally conscious of work environment.
  
• Adhere to inventory control and other company procedures as applicable.
  
• Professional conduct always.
  
• Duties and responsibilities may be added, deleted, or changed at any time at the discretion of management, formally or informally, either verbally or in writing.
  
• Act reasonably to avoid hurting themselves and others.
  
• Perform the job in a way that meets all applicable laws, regulations and EHS requirements.
  
• Report immediately all hazards / incidents to their direct Manager/Supervisor, or Site EHS Representative (or designee) after realizing a work-related event has occurred.
  
• Exercise their freedom and ability to identify areas for improvement and to initiate, recommend, or provide solutions to EHS related issues.
  
• Complete all required EHS training courses.
  
• Comply with the GCB Environmental, Health, and Safety Management System requirements.
  

• 
  
• 3 yrs experience fitting piping, running instrument tubing & installing components & vessels on skid-mounted equipment.
  
• Read & understand P&ID, general arrangement and isometric drawings
  
• Prior experience fabricating & installing piping and support structures.
  
• Measure, cut, thread, groove, bend, assemble and install various metal & plastic pipes, valves & fittings.
  
• High School diploma or General Education Degree (GED) preferred.
  

• 
  
• Knowledgeable in joining, fabricating, and repairing metal and other weldable material by applying appropriate welding techniques.
  
• Perform various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems.
  
• Fabricate and install fixtures and jigs required for welding process alignments.
  
• Interprets blueprints, specifications, diagrams or schematics to determine appropriate welding process.
  
• Must be able to select required welding filler materials, joint design, heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD.
  
• Inspects completed welds to determine structural soundness and adherence to NAVSEA, ABS & AWS standards. Installs or repairs equipment, such as pipes, valves, floors and tank linings.
  
• Leads technical project teams, schedules, reports and briefs customers and senior management.
  
• Performs duties outside of specialty in order to complete installation or work assignment.
  
• Experience in SMAW, GMAW & GTAW, Ship Fitting and OXY ACC & Propane GAS Cutting torch.
  
• Able to weld multiple types, thicknesses & sizes of pipe, plate & bar material in horizontal, overhead and/or vertical positions.
  

• 
  
• Must possess a high school, trade or vocational school degree
  
• 5-10 years of direct experience in ship repair and installation of HM&E systems and equipment
  
• Ability to read and interpret ship installation drawings, installation specifications and NAVSEA Standard Items is preferred
  
• Must have or have the ability to obtain a SECRET clearance
  
• Must have the ability to obtain base access and security credentials
  
• Ability to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs
  
• Ability to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces
  
• Travel may be required within and outside of the continental United States
  
• Due to export control regulations, this role is open to U.S. citizens of the US
  
• Demonstrated reliability and punctuality; must be able to consistently report to work on time
  
• Possess basic and some advanced specialized welder's tools
  

• Regular attendance at assigned location; may include the A/Z fabrication facility or other project sites;
• Works on systems that include Heating Hot Water, Chilled Water, Steam, Condensate, Compressed Air, Process Fluids, Chemical, Fuel Oil, Gasses, and other related systems;
• Works with materials that include carbon steel, stainless steel, plastics, fiberglass, copper, (brazed, soft soldered and pro-press);
• Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
• Remove rough spots from work pieces, using portable grinders, hand files, or scrapers.
• Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment.
• Weld pipe and components in flat, vertical, or overhead positions using open root butt weld, socket weld and/or fillet weld.
• Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.
• Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
• Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
• Examine work pieces for defects and measures work pieces with straightedges or templates to ensure conformance with specifications.
• Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreignmatter.
• Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
• Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
• Fill holes, and increase the size of metal parts.
• Detect faulty operation of equipment or defective materials and notify supervisors.
• Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
• Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
• Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
• Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools.
• Clean or degrease parts, using wire brushes, portable grinders, or chemical baths.
• Mark or tag material with proper job number, piece marks, and other identifying marks as required.
• Position and secure work pieces, using hoists, cranes, wire, and banding machines or hand tools.
• Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations.
• Dismantle metal assemblies or cut scrap metal, using thermal-cutting equipment such as flame-cutting torches or plasma-arc equipment.
• Preheat work pieces prior to welding or bending, using torches or heating furnaces.
• Hammer out bulges or bends in metal work pieces.
• Develop templates and models for welding projects, using mathematical calculations based on blueprint information.
• Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments.
• Cut, contour, and bevel metal plates and structural shapes to dimensions as specified by blueprints, layouts, work orders, and templates, using powered saws, hand shears, or chipping knives.
• Estimate consumable materials needed for production and manufacturing and maintain required stocks of materials.
• Set up and use ladders and scaffolding as necessary to complete work.
• Use fire suppression methods in industrial emergencies.
• Detect faulty operation of equipment or defective materials and notify supervisors;
• Direct helpers or apprentices in appropriate tasks;
• Must maintain strict adherence to safety rules and quality;
• Participate in site housekeeping;
• Interact with co-workers in an attentive courteous manner;
• Additional duties as directed by management.
  

• Ability to work independently or as part of a team;
• Experience: 5 years of Field Experience, trade school or apprenticeship;
• Knowledge of materials, methods and tools involved in industrial construction;
• Attention to detail;
• Ability to keep hand and arm steady;
• Be highly focused on customer satisfaction expectations;
• Good documentation and record keeping;
• Preparation of miscellaneous paperwork including time sheets, daily reports and material requests;
• Competency in Permit Required Confined Space;
• Understanding of and strict adherence to daily Job Hazard Analysis (JHA);
• Appropriate state certification or license;
• OSHA 10 certification.
  

• Industrial manufacturing facilities Power generating facilities
• Chemical manufacturing Healthcare & Institutional
• Pharmaceutical facilities including GMP - Aseptic and non-Aseptic Areas and Non GMP Areas Commercial and offices spaces