Conduit Github Jobs in Usa
332 positions found — Page 28
Concord-Hatchery Maintenance
Salary not disclosed
Description
Hatchery Maintenance Mechanic
At Pilgrim’s, Safety Is A Condition, which means the safety of our team members comes first - always.
Hatchery Mechanic
Hatchery maintenance mechanics are responsible for keeping all hatchery equipment running and the preventative maintenance done on all equipment. Equipment list is as follows:
Separator
Tray Washer
Macerator
Vacuum system
Hatchers
Setters
A/C units
Heaters
Chick counters
Evaporative Coolers
Intelliject machines
Unstop Drains
Replace light fixtures
Recam setters
Generators
Chiller
Replace wheels on farm racks and hatcher dollies
Fix anything that needs repair
Requirements:
- Must be dependable.
- Must be able to bend, squat and lift approximately 50 lbs. The job requires some overhead lifting of about 20 lbs when working in setters.
- Must be able to work in temperature up to 100 degrees in setters; however, there are overhead fans in the setters circulating the air.
- Must be able to climb a ladder at times carrying about 15 lbs (?) (weight of a 1/15 HP motor with blower wheel attached).
- Must have electrical knowledge and able to work with electricity such as wiring, motors, light fixtures, running conduit, replacing motors and working around electronic control boards.
- Must be able to climb stairs onto the roof once every month to clean filters and wash out A/C units and make repairs as needed.
- Must be able to climb a ladder.
EOE, including disability/vets Unsolicited Assistance: JBS and its companies do not accept unsolicited assistance from any recruitment vendors for any of our open jobs. All resumes or candidate profiles submitted by recruitment vendors or headhunters to any employee at JBS and its companies or via the applicant tracking system, in any form without a valid written request and search agreement previously approved by HR, will be solely owned by JBS and its companies. No fees will be paid should the candidate be hired by JBS and its companies because of an unsolicited referral.
permanent
J
Maintenance Technician
🏢 Jobot
Salary not disclosed
Maintenance Technician! This Jobot Job is hosted by: Gabriel Ozuna Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $35
- $40 per hour A bit about us: TOP Ranked Manufacturer! Our core values are centered around our people and our clients.
We believe that putting your employees first is not only the right thing to do, but it also gives us the competitive edge to ensure our clients have an excellent experience! Over the years our reputation for providing our people with the very best has caught the eye of some reputable clients who have chosen to use us as their primary firm! Why join us? We offer...
Competitive salaries and benefits! Shift and weekend premiums for specific hours worked RRSP contribution Job Details Qualifications: Be able to read, interpret, and modify electrical prints and schematics and document all self-created changes Complete understanding of Plant electrical systems, including DC Voltage and AC Voltage 24 V to 480 V and proficiency in electrical installations with conduit and wiring practices Experience using sensing and control devices Overall responsibility for ensuring safety of the work place, by seeing that appropriate practices are established in place and enforced Support, follow, and support the Lock-Out/Tag-Out program Working knowledge of PLCs, HVAC systems, pneumatic and hydraulic systems Must provide own basic tools.
Specialty tools will be available to use provided by the Company Must have reliable transportation Must be willing to work overtime if necessary Have the ability to learn and perform minor machining and welding tasks Must be able to maintain high level of awareness and follow best practices for GMP, Safety, and Sanitation Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $35
- $40 per hour A bit about us: TOP Ranked Manufacturer! Our core values are centered around our people and our clients.
We believe that putting your employees first is not only the right thing to do, but it also gives us the competitive edge to ensure our clients have an excellent experience! Over the years our reputation for providing our people with the very best has caught the eye of some reputable clients who have chosen to use us as their primary firm! Why join us? We offer...
Competitive salaries and benefits! Shift and weekend premiums for specific hours worked RRSP contribution Job Details Qualifications: Be able to read, interpret, and modify electrical prints and schematics and document all self-created changes Complete understanding of Plant electrical systems, including DC Voltage and AC Voltage 24 V to 480 V and proficiency in electrical installations with conduit and wiring practices Experience using sensing and control devices Overall responsibility for ensuring safety of the work place, by seeing that appropriate practices are established in place and enforced Support, follow, and support the Lock-Out/Tag-Out program Working knowledge of PLCs, HVAC systems, pneumatic and hydraulic systems Must provide own basic tools.
Specialty tools will be available to use provided by the Company Must have reliable transportation Must be willing to work overtime if necessary Have the ability to learn and perform minor machining and welding tasks Must be able to maintain high level of awareness and follow best practices for GMP, Safety, and Sanitation Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
J
I&E Design Technician
🏢 Jobot
Salary not disclosed
Calling all IEC Engineering Techs This Jobot Job is hosted by: Mordy Ornguze Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $70,000
- $85,000 per year A bit about us: Our Company has been busy reducing global methane emissions, and revolutionizing landfill gas (LFG) collection and refinement technologies utilizing its own patented technologies.
We continue to seek out contacts within the municipal solid waste (MSW) sector via relationship-building with landfill owners, operators and waste management companies.
We qualify, finance, develop, install, and operate projects that capture and process vented and fugitive methane to generate new revenue streams and reduce compliance risk for landfill partners.
This position will assist in developing designs and drawings for control system & power distribution on industrial gas processing facility projects.
Minimum 4+ years of experience in Electrical, Instrumentation, and Control Systems for industrial gas processing facilities.
Proficiency in Microsoft Excel required; experience with AutoCAD and PDF editing software is beneficial.
***This position is onsite in Midland, TX with relocation assistance for the right person
*** Why join us? Benefits: Dental insurance Disability insurance Health insurance Life insurance Retirement plan Relocation assistance Job Details
***This position is onsite in Midland, TX with relocation assistance for the right person
*** Technical Support & Standards Provide technical expertise and support across all projects.
Develop, maintain, and enforce standard processes, procedures, and continuous improvement initiatives.
Review departmental work for accuracy, completeness, and adherence to standards.
Participate in facility design reviews and electrical construction bid package development.
Support training activities to enhance technical capability.
Engage and support IC&E Manager task distribution.
Participate in the development of electrical construction bid packages.
Instrumentation, Controls & Electrical (IC&E) Collaborate with the I&E Manager to establish data entry points for instruments and control function.
Develop instrumentation, I/O controls, and motor control/distribution from standard P&IDs.
Specify and procure electrical instruments and equipment in coordination with project needs.
Electrical Design Assist in developing electrical deliverables for all project phases (conceptual, preliminary, detailed design).
Support design of facility power distribution systems from electric utility interface point, PLC-based control systems, and miscellaneous electrical systems (lighting, grounding, heat tracing, etc.).
Contribute to preparation of electrical design drawings such as: •Single line diagrams •Power lighting, grounding, control panel, and other system plans.
•Electrical equipment arrangement plans •Cable tray layout plans and sections •Conduit and cable schedules •Motor control schematics Assist with typical electrical specifications (e.g., MV/LV switchgear, MCCs, transformers, generators, UPSs, installation/testing requirements).
Develop and maintain electrical databases/spreadsheets (e.g., motor lists, load lists, instrumentation spreadsheets).
Assist with electrical calculations (e.g., load flow studies, voltage drop, lighting, short circuit a protective device coordination analyses, arc flash and labeling).
Support management of third-party engineering firms, including backchecking their deliverables.
Procurement & Vendor Management: Participate in procurement of electrical and control systems equipment, including preparation of technical data for inquiry packages, technical bid evaluations, and vendor document reviews.
Oversee procurement of equipment required by the I&E department.
Fabrication, Construction & Commissioning Support: Support project construction through meetings, RFIs, and occasional site visits.
Inspect electrical installations and equipment for compliance with engineering documents, specifications, and safety standards.
Assist with development of standard operating procedures (SOPs) for electrical systems and equipment.
Supervise yard/shop contractors for electrical fabrication activities.
Other Duties: Perform additional tasks as assigned to support department and project success.
Participate in continuous improvement program Knowledge, Skills and Abilities: Strong knowledge of electrical design practices and interpretation of P&IDs, electrical drawings, specifications, building/electrical codes, and construction costs/techniques.
Working knowledge of the NEC and applicable electrical codes, with familiarity in industry codes and standards (IEC, ANSI, IEEE, ISA).
Knowledge of NEC/NFPA standards is beneficial.
Knowledge of VFD/motor control equipment beneficial.
Ability to work independently and collaboratively with engineers and designers on multiple concurrent projects.
Excellent organizational, written, and verbal communication skills; able to convey ideas clearly and concisely.
Demonstrated accountability
- accepts responsibility for actions and follows through on commitments.
Proficiency with personal computers, office networks, and Microsoft Office (Word, Excel, PowerPoint, Access).
Bachelor’s degree in electrical engineering or related field is valued but not required; equivalent experience and industry knowledge is beneficial.
Physical/Work Environment: Primarily office-based, with extended periods of sedentary computer work.
Occasional outdoor activities for equipment inspections and coordination.
Ability to lift up to 20 lbs.
and perform repetitive hand/finger tasks (typing, mobile communication).
Requires strong visual and auditory attention for design and field work.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $70,000
- $85,000 per year A bit about us: Our Company has been busy reducing global methane emissions, and revolutionizing landfill gas (LFG) collection and refinement technologies utilizing its own patented technologies.
We continue to seek out contacts within the municipal solid waste (MSW) sector via relationship-building with landfill owners, operators and waste management companies.
We qualify, finance, develop, install, and operate projects that capture and process vented and fugitive methane to generate new revenue streams and reduce compliance risk for landfill partners.
This position will assist in developing designs and drawings for control system & power distribution on industrial gas processing facility projects.
Minimum 4+ years of experience in Electrical, Instrumentation, and Control Systems for industrial gas processing facilities.
Proficiency in Microsoft Excel required; experience with AutoCAD and PDF editing software is beneficial.
***This position is onsite in Midland, TX with relocation assistance for the right person
*** Why join us? Benefits: Dental insurance Disability insurance Health insurance Life insurance Retirement plan Relocation assistance Job Details
***This position is onsite in Midland, TX with relocation assistance for the right person
*** Technical Support & Standards Provide technical expertise and support across all projects.
Develop, maintain, and enforce standard processes, procedures, and continuous improvement initiatives.
Review departmental work for accuracy, completeness, and adherence to standards.
Participate in facility design reviews and electrical construction bid package development.
Support training activities to enhance technical capability.
Engage and support IC&E Manager task distribution.
Participate in the development of electrical construction bid packages.
Instrumentation, Controls & Electrical (IC&E) Collaborate with the I&E Manager to establish data entry points for instruments and control function.
Develop instrumentation, I/O controls, and motor control/distribution from standard P&IDs.
Specify and procure electrical instruments and equipment in coordination with project needs.
Electrical Design Assist in developing electrical deliverables for all project phases (conceptual, preliminary, detailed design).
Support design of facility power distribution systems from electric utility interface point, PLC-based control systems, and miscellaneous electrical systems (lighting, grounding, heat tracing, etc.).
Contribute to preparation of electrical design drawings such as: •Single line diagrams •Power lighting, grounding, control panel, and other system plans.
•Electrical equipment arrangement plans •Cable tray layout plans and sections •Conduit and cable schedules •Motor control schematics Assist with typical electrical specifications (e.g., MV/LV switchgear, MCCs, transformers, generators, UPSs, installation/testing requirements).
Develop and maintain electrical databases/spreadsheets (e.g., motor lists, load lists, instrumentation spreadsheets).
Assist with electrical calculations (e.g., load flow studies, voltage drop, lighting, short circuit a protective device coordination analyses, arc flash and labeling).
Support management of third-party engineering firms, including backchecking their deliverables.
Procurement & Vendor Management: Participate in procurement of electrical and control systems equipment, including preparation of technical data for inquiry packages, technical bid evaluations, and vendor document reviews.
Oversee procurement of equipment required by the I&E department.
Fabrication, Construction & Commissioning Support: Support project construction through meetings, RFIs, and occasional site visits.
Inspect electrical installations and equipment for compliance with engineering documents, specifications, and safety standards.
Assist with development of standard operating procedures (SOPs) for electrical systems and equipment.
Supervise yard/shop contractors for electrical fabrication activities.
Other Duties: Perform additional tasks as assigned to support department and project success.
Participate in continuous improvement program Knowledge, Skills and Abilities: Strong knowledge of electrical design practices and interpretation of P&IDs, electrical drawings, specifications, building/electrical codes, and construction costs/techniques.
Working knowledge of the NEC and applicable electrical codes, with familiarity in industry codes and standards (IEC, ANSI, IEEE, ISA).
Knowledge of NEC/NFPA standards is beneficial.
Knowledge of VFD/motor control equipment beneficial.
Ability to work independently and collaboratively with engineers and designers on multiple concurrent projects.
Excellent organizational, written, and verbal communication skills; able to convey ideas clearly and concisely.
Demonstrated accountability
- accepts responsibility for actions and follows through on commitments.
Proficiency with personal computers, office networks, and Microsoft Office (Word, Excel, PowerPoint, Access).
Bachelor’s degree in electrical engineering or related field is valued but not required; equivalent experience and industry knowledge is beneficial.
Physical/Work Environment: Primarily office-based, with extended periods of sedentary computer work.
Occasional outdoor activities for equipment inspections and coordination.
Ability to lift up to 20 lbs.
and perform repetitive hand/finger tasks (typing, mobile communication).
Requires strong visual and auditory attention for design and field work.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
J
Maintenance Electrician
🏢 Jobot
Salary not disclosed
Maintenance Electrician This Jobot Job is hosted by: Jamal Elkhateib Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $38
- $42 per hour A bit about us: industry leader in steel and metals manufacturing, operating a 240,000+ sq.
ft., state-of-the-art production facility serving major markets including automotive, heavy truck, agriculture, solar, HVAC, and industrial hardware.
The company is known for its high-quality standards, ISO-certified processes, and exceptional investment in training, equipment, and employee development.
The organization is experiencing significant growth, expanding operations, and adding skilled Millwright talent to support increased production demands.
Why join us? Medical Dental Vision 401k with generous match 4-9% monthly bonus! Stability with huge growth options Advancement Opportunities Overtime opportunities Job Details The Maintenance Electrician is responsible for the electrical maintenance, repair, troubleshooting, and installation of industrial equipment and power systems.
This role ensures safe and reliable operation of production lines, electrical distribution, and automation systems in a high-volume manufacturing environment.
You will work closely with maintenance, engineering, and production teams to support uptime, reduce failures, and support continuous improvement initiatives.
Key Responsibilities Troubleshoot and repair electrical issues on industrial equipment, including motors, VFDs, PLCs, control panels, conveyors, and automated systems Perform maintenance on 480V 3-phase power, MCCs, switchgear, and distribution systems Install, inspect, and maintain wiring, conduit, lighting, and control systems Troubleshoot sensors, relays, control circuits, and basic electronic components Support maintenance activities on electromechanical systems involving motors, drives, and integrated equipment Execute preventive and predictive maintenance tasks, documenting inspections and findings Read, interpret, and work from electrical schematics, blueprints, and technical drawings Collaborate with maintenance and production teams to support equipment upgrades and continuous improvement Ensure compliance with electrical codes, safety standards, lockout/tagout procedures, and internal quality guidelines Qualifications 3+ years of being a Licensed journeyman Electrician.
Proficiency with 480V 3-phase systems, VFDs, motor controls, and industrial power systems Ability to troubleshoot control circuits, sensors, and automation components Experience working in heavy industrial, metals, or high-volume manufacturing preferred Strong understanding of NEC codes and electrical safety requirements Ability to work independently in a fast-paced environment Comfortable working on multiple shifts, depending on preference and availability Strong commitment to safety, reliability, and quality workmanship Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $38
- $42 per hour A bit about us: industry leader in steel and metals manufacturing, operating a 240,000+ sq.
ft., state-of-the-art production facility serving major markets including automotive, heavy truck, agriculture, solar, HVAC, and industrial hardware.
The company is known for its high-quality standards, ISO-certified processes, and exceptional investment in training, equipment, and employee development.
The organization is experiencing significant growth, expanding operations, and adding skilled Millwright talent to support increased production demands.
Why join us? Medical Dental Vision 401k with generous match 4-9% monthly bonus! Stability with huge growth options Advancement Opportunities Overtime opportunities Job Details The Maintenance Electrician is responsible for the electrical maintenance, repair, troubleshooting, and installation of industrial equipment and power systems.
This role ensures safe and reliable operation of production lines, electrical distribution, and automation systems in a high-volume manufacturing environment.
You will work closely with maintenance, engineering, and production teams to support uptime, reduce failures, and support continuous improvement initiatives.
Key Responsibilities Troubleshoot and repair electrical issues on industrial equipment, including motors, VFDs, PLCs, control panels, conveyors, and automated systems Perform maintenance on 480V 3-phase power, MCCs, switchgear, and distribution systems Install, inspect, and maintain wiring, conduit, lighting, and control systems Troubleshoot sensors, relays, control circuits, and basic electronic components Support maintenance activities on electromechanical systems involving motors, drives, and integrated equipment Execute preventive and predictive maintenance tasks, documenting inspections and findings Read, interpret, and work from electrical schematics, blueprints, and technical drawings Collaborate with maintenance and production teams to support equipment upgrades and continuous improvement Ensure compliance with electrical codes, safety standards, lockout/tagout procedures, and internal quality guidelines Qualifications 3+ years of being a Licensed journeyman Electrician.
Proficiency with 480V 3-phase systems, VFDs, motor controls, and industrial power systems Ability to troubleshoot control circuits, sensors, and automation components Experience working in heavy industrial, metals, or high-volume manufacturing preferred Strong understanding of NEC codes and electrical safety requirements Ability to work independently in a fast-paced environment Comfortable working on multiple shifts, depending on preference and availability Strong commitment to safety, reliability, and quality workmanship Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
J
Building Automation Controls Specialist
🏢 Jobot
Salary not disclosed
Top Ranked Employer is growing their team in Houston, Texas This Jobot Job is hosted by: Courtney Hoogervorst Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $85,000
- $110,000 per year A bit about us: Established Manufacturers Representative company that provides HVAC, Building Automation, and plumbing products throughout Texas .
Why join us? Comprehensive medical, dental, and vision plans .
Competitive PTO package Paid Holidays Short Term, and Long Term Disability 401(k) Savings Plan Job Details We’re seeking a skilled Building Automation Controls Technician to join our dynamic team.
In this role, you will be responsible for installing, maintaining, and troubleshooting advanced building automation systems—specifically Siemens BAS platforms—ensuring optimal performance, energy efficiency, and occupant comfort.
Key Responsibilities Install & Commission: Set up Siemens building automation systems (e.g., Desigo CC, Apogee) including controllers, sensors, valves, and network components.
Service & Maintenance: Diagnose and resolve operational issues such as HVAC control logic, network connectivity, and BAS device faults.
Programming & Configuration: Adjust control sequences, BACnet/IP or LonWorks networks, alarms, and schedules within BAS software applications.
System Integration: Coordinate ownership data, tag structures, graphics, and third-party integrations (e.g., meters, chillers, BMS).
Testing & Validation: Conduct functional testing and performance validation during commissioning and after system updates or upgrades.
Technical Support & Training: Provide onsite and remote troubleshooting, firmware upgrades, and user training for facility staff.
Documentation: Maintain as-built drawings, point matrices, service reports, and update device inventories.
Collaboration: Work with project managers, mechanical/electrical contractors, and engineers to ensure project success—from design through handover.
Required Qualifications Minimum 3–5 years working with Siemens building automation systems.
Proficient with BAS platforms (Siemens Apogee, Desigo CC, DXR, etc.), BACnet/IP, analog/digital I/O, and field devices.
Hands-on experience installing controllers, sensors, valves, and conduits.
Skilled in diagnosing communication, logic, and hardware issues.
Certifications (Preferred): Siemens CERTIFIED (Apogee, Desigo), OSHA 10-hour, EPA Section 608.
Driver’s License: Valid TX driver’s license with clean driving record for travel between sites.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $85,000
- $110,000 per year A bit about us: Established Manufacturers Representative company that provides HVAC, Building Automation, and plumbing products throughout Texas .
Why join us? Comprehensive medical, dental, and vision plans .
Competitive PTO package Paid Holidays Short Term, and Long Term Disability 401(k) Savings Plan Job Details We’re seeking a skilled Building Automation Controls Technician to join our dynamic team.
In this role, you will be responsible for installing, maintaining, and troubleshooting advanced building automation systems—specifically Siemens BAS platforms—ensuring optimal performance, energy efficiency, and occupant comfort.
Key Responsibilities Install & Commission: Set up Siemens building automation systems (e.g., Desigo CC, Apogee) including controllers, sensors, valves, and network components.
Service & Maintenance: Diagnose and resolve operational issues such as HVAC control logic, network connectivity, and BAS device faults.
Programming & Configuration: Adjust control sequences, BACnet/IP or LonWorks networks, alarms, and schedules within BAS software applications.
System Integration: Coordinate ownership data, tag structures, graphics, and third-party integrations (e.g., meters, chillers, BMS).
Testing & Validation: Conduct functional testing and performance validation during commissioning and after system updates or upgrades.
Technical Support & Training: Provide onsite and remote troubleshooting, firmware upgrades, and user training for facility staff.
Documentation: Maintain as-built drawings, point matrices, service reports, and update device inventories.
Collaboration: Work with project managers, mechanical/electrical contractors, and engineers to ensure project success—from design through handover.
Required Qualifications Minimum 3–5 years working with Siemens building automation systems.
Proficient with BAS platforms (Siemens Apogee, Desigo CC, DXR, etc.), BACnet/IP, analog/digital I/O, and field devices.
Hands-on experience installing controllers, sensors, valves, and conduits.
Skilled in diagnosing communication, logic, and hardware issues.
Certifications (Preferred): Siemens CERTIFIED (Apogee, Desigo), OSHA 10-hour, EPA Section 608.
Driver’s License: Valid TX driver’s license with clean driving record for travel between sites.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
M
Owner Services Representative
Salary not disclosed
Hourly Rate: $27.81 JOB SUMMARY This position is responsible for the functions related to all owners, their agents, and representatives in regard to their owned unit within the confines of the property.
This position is responsible for all forms of communication with all owners, coordination of owner visits to property, use of their unit and directs and participates in condition inspections of same with support from, Housekeeping and Maintenance leaders.
Responsible for organizing and coordinating unit renovation projects.
CORE WORK ACTIVITIES Responsible for all activities that are required in meeting requirements of owners using discretion and independent judgement.
Role requires initiative and independent decision making and includes, but is not limited to, planning, preparation, and execution in support of unit owner requests and following through on appropriate direction given by the owner or owner's representative.
Responsible for the successful renewal of management agreements, and the growth of units in the rental programs though achieving goals and objectives set by the General Manager.
Responsible for the quality of services as measured by owners' comments and feedback.
Requires independent review and analysis of the frequency and severity of complaints or issues raised regarding their units and requires significant decision making relative to the development of strategies to correct deficiencies in concert with owners.
Owner services rep must regularly and consistently meet all deadlines for submitting work requested by the General Manager, Rooms Division Manager, or individual owners.
Must be able to independently lead, organize and coordinate the rental pool renovation program which will include, but is not limited to, working with and following up on all contractors, preparing the necessary documentation of work completed in each unit and organizing all unit files.
Must become conversant with association by-laws, covenants and house rules as the relate to owners' rights and duties.
This position acts as a liaison and advocate to, and for the owners within the rental program.
Will act as a conduit of information headquarters, management of the property.
Responsible for participating in a property safety program and joint inspection of owners' unit with general management to identify potential safety hazards.
CANDIDATE PROFILE College degree is preferred but not required.
Real Estate license preferred, but not required.
Condominium/Resort background preferred.
3-5 years of managerial experience in the hospitality field or property management.
Must be able to speak, read, write, and understand the English language.
Must be able to identify and analyze Customer's needs and wants to meet and exceed their expectations through various resources.
#imvwro Marriott Vacations Worldwide is an equal opportunity employer committed to hiring a diverse workforce and sustaining an inclusive culture.
This position is responsible for all forms of communication with all owners, coordination of owner visits to property, use of their unit and directs and participates in condition inspections of same with support from, Housekeeping and Maintenance leaders.
Responsible for organizing and coordinating unit renovation projects.
CORE WORK ACTIVITIES Responsible for all activities that are required in meeting requirements of owners using discretion and independent judgement.
Role requires initiative and independent decision making and includes, but is not limited to, planning, preparation, and execution in support of unit owner requests and following through on appropriate direction given by the owner or owner's representative.
Responsible for the successful renewal of management agreements, and the growth of units in the rental programs though achieving goals and objectives set by the General Manager.
Responsible for the quality of services as measured by owners' comments and feedback.
Requires independent review and analysis of the frequency and severity of complaints or issues raised regarding their units and requires significant decision making relative to the development of strategies to correct deficiencies in concert with owners.
Owner services rep must regularly and consistently meet all deadlines for submitting work requested by the General Manager, Rooms Division Manager, or individual owners.
Must be able to independently lead, organize and coordinate the rental pool renovation program which will include, but is not limited to, working with and following up on all contractors, preparing the necessary documentation of work completed in each unit and organizing all unit files.
Must become conversant with association by-laws, covenants and house rules as the relate to owners' rights and duties.
This position acts as a liaison and advocate to, and for the owners within the rental program.
Will act as a conduit of information headquarters, management of the property.
Responsible for participating in a property safety program and joint inspection of owners' unit with general management to identify potential safety hazards.
CANDIDATE PROFILE College degree is preferred but not required.
Real Estate license preferred, but not required.
Condominium/Resort background preferred.
3-5 years of managerial experience in the hospitality field or property management.
Must be able to speak, read, write, and understand the English language.
Must be able to identify and analyze Customer's needs and wants to meet and exceed their expectations through various resources.
#imvwro Marriott Vacations Worldwide is an equal opportunity employer committed to hiring a diverse workforce and sustaining an inclusive culture.
Not Specified
J
Lead Electrical Engineer
🏢 Jobot
Salary not disclosed
Urgently hiring Lead Electrical Engineer in Houston/TX (fully on site) This Jobot Job is hosted by: Doug Goldman Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $100,000
- $200,000 per year A bit about us: Our Client is an innovative cleantech startup on a mission to unlock ammonia's potential as a clean energy source Why join us? What You’ll Be Doing Collaborate with internal and external stakeholders to understand electrical system requirements and develop electrical power distribution system, instrumentation and control specifications to meet performance, safety, and regulatory standards.
Perform detailed electrical calculation and design for reactor’s electrical power distribution systems/equipment, cable installations, conduit installations, cable tray installations, and grounding systems in accordance with industry standards and the latest versions of manufacturer software and sizing guidelines.
Develop electrical wiring diagrams for sensors (pressure transducers, RTD sensors, flow meters, liquid level switches, etc.), and actuators (air compressor, pumps, VFDs, solenoid valves, proportional valves, mass flow controller, etc.).
Develop Instrumentation deliverables such as Instrument Indexes, Datasheets, Cable Schedules, Panel Layout & Wiring Drawings, Loop -Drawings, Location Plans, etc.
Select, procure, configure, and test of low-voltage and high-voltage instrumental devices and systems, such as sensors, actuators, air compressor, VFDs, electrical heaters, etc.
Specify the functions of low-power and high-power distribution system, and interface with contractor for system/cabinet built.
Design, assemble and test low-voltage and high-voltage cabinet, junction boxes and harnesses.
FAT and SAT low-voltage, high-voltage and PLC control cabinets Support testing facility electrical and control system commissioning and maintenance Design and Test interface circuits between instruments and PLC IO modules Develop and execute test plans to validate electrical systems and ensure compliance with project specifications, industry standards, and regulatory requirements.
Engage with external collaborators, including suppliers and manufacturers, to source and evaluate components, troubleshoot issues, and ensure quality.
Maintenance and operate facilities to resolve electrical operational or performance issues, such as commissioning and troubleshooting facility electrical systems, coordination with vendors and/or third-party engineering companies while adhering to the corporate MOC policy.
Job Details The minimum requirements we seek: BS in Electrical and Computer Engineering or related degree with 10+ years of professional experience in developing electrical/electronic, instrumentation and control systems.
Prior experience in selecting, configuring and testing the electrical / electronic components and instruments, such as motors, air compressors, pumps, VFDs, heaters, solenoid valves, proportional valves, mass flow controllers, gas analyzers, etc.
Prior experience in developing electrical wiring diagrams for sensors (pressure transducers, RTD sensors, flow meters, liquid level switches, etc.), and actuators (air compressor, solenoid valves, proportional valves, mass flow controller, etc.) using commercial electrical schematic design tools and software, such as SOLIDWORKS Electrical Schematic, Lucidchart, etc.
Prior experience in generating Instrument Indexes (Instrumentation and Control List) based on P&ID, and creating PLC IOs mapping for these Instrument Tags Prior experience in designing electrical schematics that interface the instruments with PLCs and the associated IO modules Prior experience in designing single line diagram (SLD) for power distribution system Prior experience in designing low-voltage and high-voltage enclosures and harnesses Prior experience in R&D Lab and commercial production facilities electrical system design, commissioning and maintenance.
Ability to work in a fast-paced environment with excellent written and verbal communication skills Ability to build and maintain strong working relationships with both internal teams and external partners.
Preferred Experience: 5+ years of experience in designing low-voltage and high-voltage electrical and instrumentation systems in accordance with industry standards per the National Electrical Code (NEC), International Electrotechnical Commission (IEC), American National Standards Institute (ANSI), etc.
10+ years of experience in designing electrical wiring diagrams for electrical instrument and control systems for petrochemical or pharmaceutical processes 10+ years of experience in specifying, selecting, configuring and testing low-voltage and high-voltage electrical equipment/instruments for petrochemical or pharmaceutical processes 5+ years of experience in designing and testing electrical circuits for motors, air compressors, pumps, heaters, solenoid valves, proportional valves, mass flow controllers, gas analyzers, etc.
Prior experience in selecting, and testing Industrial PLCs, and the associated IO and field BUS modules Prior experience in configuring PLC IO modules, testing and troubleshooting PLC based electrical and control systems.
Working knowledge of SCADA system and common field bus communication protocols (CANBUS, J1939, PROFINET, EtherCAT, ModBus, etc.).
Demonstration of strong work history with the ability to work autonomously and independently on projects with variety of complexity Demonstrated initiative, independent decision-making ability and skills in developing technical recommendations/solutions.
Demonstration of the capability of generating high-quality engineering design documents What We Offer: Competitive Medical, Dental & Vision Care FSA and HSA 401(k) with 5% company match Life insurance Flexible (PTO) Ancillary Benefits Employee Assistance Program (EAP) Open, supportive culture of drive and execution Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $100,000
- $200,000 per year A bit about us: Our Client is an innovative cleantech startup on a mission to unlock ammonia's potential as a clean energy source Why join us? What You’ll Be Doing Collaborate with internal and external stakeholders to understand electrical system requirements and develop electrical power distribution system, instrumentation and control specifications to meet performance, safety, and regulatory standards.
Perform detailed electrical calculation and design for reactor’s electrical power distribution systems/equipment, cable installations, conduit installations, cable tray installations, and grounding systems in accordance with industry standards and the latest versions of manufacturer software and sizing guidelines.
Develop electrical wiring diagrams for sensors (pressure transducers, RTD sensors, flow meters, liquid level switches, etc.), and actuators (air compressor, pumps, VFDs, solenoid valves, proportional valves, mass flow controller, etc.).
Develop Instrumentation deliverables such as Instrument Indexes, Datasheets, Cable Schedules, Panel Layout & Wiring Drawings, Loop -Drawings, Location Plans, etc.
Select, procure, configure, and test of low-voltage and high-voltage instrumental devices and systems, such as sensors, actuators, air compressor, VFDs, electrical heaters, etc.
Specify the functions of low-power and high-power distribution system, and interface with contractor for system/cabinet built.
Design, assemble and test low-voltage and high-voltage cabinet, junction boxes and harnesses.
FAT and SAT low-voltage, high-voltage and PLC control cabinets Support testing facility electrical and control system commissioning and maintenance Design and Test interface circuits between instruments and PLC IO modules Develop and execute test plans to validate electrical systems and ensure compliance with project specifications, industry standards, and regulatory requirements.
Engage with external collaborators, including suppliers and manufacturers, to source and evaluate components, troubleshoot issues, and ensure quality.
Maintenance and operate facilities to resolve electrical operational or performance issues, such as commissioning and troubleshooting facility electrical systems, coordination with vendors and/or third-party engineering companies while adhering to the corporate MOC policy.
Job Details The minimum requirements we seek: BS in Electrical and Computer Engineering or related degree with 10+ years of professional experience in developing electrical/electronic, instrumentation and control systems.
Prior experience in selecting, configuring and testing the electrical / electronic components and instruments, such as motors, air compressors, pumps, VFDs, heaters, solenoid valves, proportional valves, mass flow controllers, gas analyzers, etc.
Prior experience in developing electrical wiring diagrams for sensors (pressure transducers, RTD sensors, flow meters, liquid level switches, etc.), and actuators (air compressor, solenoid valves, proportional valves, mass flow controller, etc.) using commercial electrical schematic design tools and software, such as SOLIDWORKS Electrical Schematic, Lucidchart, etc.
Prior experience in generating Instrument Indexes (Instrumentation and Control List) based on P&ID, and creating PLC IOs mapping for these Instrument Tags Prior experience in designing electrical schematics that interface the instruments with PLCs and the associated IO modules Prior experience in designing single line diagram (SLD) for power distribution system Prior experience in designing low-voltage and high-voltage enclosures and harnesses Prior experience in R&D Lab and commercial production facilities electrical system design, commissioning and maintenance.
Ability to work in a fast-paced environment with excellent written and verbal communication skills Ability to build and maintain strong working relationships with both internal teams and external partners.
Preferred Experience: 5+ years of experience in designing low-voltage and high-voltage electrical and instrumentation systems in accordance with industry standards per the National Electrical Code (NEC), International Electrotechnical Commission (IEC), American National Standards Institute (ANSI), etc.
10+ years of experience in designing electrical wiring diagrams for electrical instrument and control systems for petrochemical or pharmaceutical processes 10+ years of experience in specifying, selecting, configuring and testing low-voltage and high-voltage electrical equipment/instruments for petrochemical or pharmaceutical processes 5+ years of experience in designing and testing electrical circuits for motors, air compressors, pumps, heaters, solenoid valves, proportional valves, mass flow controllers, gas analyzers, etc.
Prior experience in selecting, and testing Industrial PLCs, and the associated IO and field BUS modules Prior experience in configuring PLC IO modules, testing and troubleshooting PLC based electrical and control systems.
Working knowledge of SCADA system and common field bus communication protocols (CANBUS, J1939, PROFINET, EtherCAT, ModBus, etc.).
Demonstration of strong work history with the ability to work autonomously and independently on projects with variety of complexity Demonstrated initiative, independent decision-making ability and skills in developing technical recommendations/solutions.
Demonstration of the capability of generating high-quality engineering design documents What We Offer: Competitive Medical, Dental & Vision Care FSA and HSA 401(k) with 5% company match Life insurance Flexible (PTO) Ancillary Benefits Employee Assistance Program (EAP) Open, supportive culture of drive and execution Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
J
Industrial Electro-Mechanic
🏢 Jobot
Salary not disclosed
Industrial Electro-Mechanic Job with Industry Leader / $30-$40 an hour depending on Experience / Great Benefits and Room for Growth This Jobot Job is hosted by: Ken McClure Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $30
- $40 per hour A bit about us: We are seeking a skilled Electrical Maintenance Mechanic to support manufacturing operations by maintaining, troubleshooting, and repairing electrical and electromechanical systems.
This role plays a critical part in minimizing downtime, improving equipment reliability, and ensuring safe plant operations.
Why join us? $30-$40 an hour Excellent Benefits Room for Growth Job Details Key Responsibilities Troubleshoot, repair, and maintain industrial electrical systems, including motors, drives, control panels, and power distribution Diagnose and repair PLC-controlled equipment, sensors, relays, contactors, and HMIs Perform preventive and predictive maintenance on electrical systems and production equipment Read and interpret electrical schematics, blueprints, and wiring diagrams Install and modify electrical components, conduit, and control wiring Identify root causes of electrical failures and recommend corrective actions Support equipment upgrades, startups, and continuous improvement initiatives Maintain accurate maintenance records and documentation Follow all OSHA, safety, and lockout/tagout procedures Qualifications 3+ years of experience as an Electrical Maintenance Mechanic in a manufacturing or industrial setting Strong troubleshooting skills in electrical systems (AC/DC, motors, VFDs, PLCs) Ability to read electrical prints and schematics Knowledge of industrial safety standards and electrical codes Ability to work independently and as part of a maintenance team Willingness to work overtime, weekends, or on-call as needed Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $30
- $40 per hour A bit about us: We are seeking a skilled Electrical Maintenance Mechanic to support manufacturing operations by maintaining, troubleshooting, and repairing electrical and electromechanical systems.
This role plays a critical part in minimizing downtime, improving equipment reliability, and ensuring safe plant operations.
Why join us? $30-$40 an hour Excellent Benefits Room for Growth Job Details Key Responsibilities Troubleshoot, repair, and maintain industrial electrical systems, including motors, drives, control panels, and power distribution Diagnose and repair PLC-controlled equipment, sensors, relays, contactors, and HMIs Perform preventive and predictive maintenance on electrical systems and production equipment Read and interpret electrical schematics, blueprints, and wiring diagrams Install and modify electrical components, conduit, and control wiring Identify root causes of electrical failures and recommend corrective actions Support equipment upgrades, startups, and continuous improvement initiatives Maintain accurate maintenance records and documentation Follow all OSHA, safety, and lockout/tagout procedures Qualifications 3+ years of experience as an Electrical Maintenance Mechanic in a manufacturing or industrial setting Strong troubleshooting skills in electrical systems (AC/DC, motors, VFDs, PLCs) Ability to read electrical prints and schematics Knowledge of industrial safety standards and electrical codes Ability to work independently and as part of a maintenance team Willingness to work overtime, weekends, or on-call as needed Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
M
Electromechanical Tech - 1st Shift
Salary not disclosed
Job Summary Who We Are: Medline is the largest provider of medical-surgical products and supply chain solutions in the U.S., every hour of every day, healthcare professionals across the globe rely on Medline to help them do their job.
We make healthcare run better.
What We Bring: Medline is a team that is committed to customer care and making products that have a positive impact for patients.
Medline is committed to simplifying processes, empowering our teams to achieve results and recognizing those achievements.
The opportunities are here, come grow with us! What You Bring: We are looking for individuals who have a passion for making a quality healthcare product in a collaborative and respectful environment.
We look for those who are enthusiastic about trying new things and learning every day.
If you have a relentless focus on serving the customer every day and are results driven, Medline is the place for you.
Would you enjoy working in a clean, organized, safety-focused facility? Enjoy a set schedule, work-life balance, and excellent benefits.
Apply today! Inspect, test, troubleshoot, repair, install, and maintain, both electrically and mechanically, all manufacturing, packaging, facility/utility equipment, and its associated components and systems including but not limited to: electrical and automation systems, conveyor systems, syringe lines, cappers, fillers, and HVAC systems, with a responsibility for safety, reliability, quality & production.
Job Description $6,500.00 SIGN-ON BONUS! RESPONSIBILITIES: Complete and prioritize multiple tasks and work orders; determine the proper course of action and safely implement it.
Perform scheduled preventative maintenance on assigned equipment, complete paperwork, and update CMMS records using good documentation practices.
Analyze electrical/mechanical operational problems.
Make necessary electrical, mechanical, hydraulic, and pneumatic corrections to maintain maximum production & quality.
Troubleshoot the following components using precision test equipment & hand tools to locate the root cause of a breakdown & correct the issues: thermocouples, motors (all types), starters, breakers, transformers, isolation switches, relays, fuses, resistors, valves, variable frequency drives, various types of sensors and switches electrical, coaxial, and fiber optic cables, conduit, receptacles, PLCs, heaters, control panels, lights & lighting panels, distributive controls, UPS, fire & emergency alarms.
Fabricate parts or source parts as required Assist in machine start-ups and changeovers.
BASIC QUALIFICATIONS: Education: High school diploma or equivalent.
Trade school education, certification, or professional training.
Relevant Work Experience: Certification course or a vocational course in mechanical/electrical concepts.
Additional 3 years Manufacturing/Industrial setting experience.
Troubleshoot VFDs, servo-motors, & different types of sensors is a plus.
Experience working with the basic concepts of different kinds of industrial/high speed production machines.
Knowledge about the safety precautions while working with machines.
Experience with schematics, American & European Standard.
Work to effectively troubleshoot technical issues both related to maintenance and in emergency situations Troubleshooting electrical, motor and control problems.
This includes determining if a motor or electrical system, is functioning properly and is configured properly.
Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $28.00
- $40.50 Hourly The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
We make healthcare run better.
What We Bring: Medline is a team that is committed to customer care and making products that have a positive impact for patients.
Medline is committed to simplifying processes, empowering our teams to achieve results and recognizing those achievements.
The opportunities are here, come grow with us! What You Bring: We are looking for individuals who have a passion for making a quality healthcare product in a collaborative and respectful environment.
We look for those who are enthusiastic about trying new things and learning every day.
If you have a relentless focus on serving the customer every day and are results driven, Medline is the place for you.
Would you enjoy working in a clean, organized, safety-focused facility? Enjoy a set schedule, work-life balance, and excellent benefits.
Apply today! Inspect, test, troubleshoot, repair, install, and maintain, both electrically and mechanically, all manufacturing, packaging, facility/utility equipment, and its associated components and systems including but not limited to: electrical and automation systems, conveyor systems, syringe lines, cappers, fillers, and HVAC systems, with a responsibility for safety, reliability, quality & production.
Job Description $6,500.00 SIGN-ON BONUS! RESPONSIBILITIES: Complete and prioritize multiple tasks and work orders; determine the proper course of action and safely implement it.
Perform scheduled preventative maintenance on assigned equipment, complete paperwork, and update CMMS records using good documentation practices.
Analyze electrical/mechanical operational problems.
Make necessary electrical, mechanical, hydraulic, and pneumatic corrections to maintain maximum production & quality.
Troubleshoot the following components using precision test equipment & hand tools to locate the root cause of a breakdown & correct the issues: thermocouples, motors (all types), starters, breakers, transformers, isolation switches, relays, fuses, resistors, valves, variable frequency drives, various types of sensors and switches electrical, coaxial, and fiber optic cables, conduit, receptacles, PLCs, heaters, control panels, lights & lighting panels, distributive controls, UPS, fire & emergency alarms.
Fabricate parts or source parts as required Assist in machine start-ups and changeovers.
BASIC QUALIFICATIONS: Education: High school diploma or equivalent.
Trade school education, certification, or professional training.
Relevant Work Experience: Certification course or a vocational course in mechanical/electrical concepts.
Additional 3 years Manufacturing/Industrial setting experience.
Troubleshoot VFDs, servo-motors, & different types of sensors is a plus.
Experience working with the basic concepts of different kinds of industrial/high speed production machines.
Knowledge about the safety precautions while working with machines.
Experience with schematics, American & European Standard.
Work to effectively troubleshoot technical issues both related to maintenance and in emergency situations Troubleshooting electrical, motor and control problems.
This includes determining if a motor or electrical system, is functioning properly and is configured properly.
Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $28.00
- $40.50 Hourly The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Not Specified
J
Automation Technician
🏢 Jobot
Salary not disclosed
Automation Tech
- Competitive Salary and Great Benefits This Jobot Job is hosted by: Sean Copeland Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $35
- $45 per hour A bit about us: We are a global manufacturer Why join us? Best in Class Company! Competitive Compensation Package! Complete Benefits Package! Flexible Work Schedules! Accelerated Career Growth! Job Details Responsibilities: Program/troubleshoot PLC software and hardware.
Interpret PLC ladder logic & machine sequence of operation Troubleshoot/diagnose/repair electrical, electronic and mechanical, pneumatic and hydraulic equipment, components, and robotic systems Perform preliminary equipment inspections, run conduit and terminate wiring, install pneumatic lines, perform Point-to-Point wiring verifications Calibrate weight systems, transmitters, transducers, indicators, readouts, and tune control loops Complete shop records and use reporting system following established procedures as required for effective performance of the job or operation of the department Maintain a safe work environment Qualifications: AS in Mechanical or Electrical (preferred) Certificate in Industrial Maintenance 1 year of experience in manufacturing environment Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
- Competitive Salary and Great Benefits This Jobot Job is hosted by: Sean Copeland Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $35
- $45 per hour A bit about us: We are a global manufacturer Why join us? Best in Class Company! Competitive Compensation Package! Complete Benefits Package! Flexible Work Schedules! Accelerated Career Growth! Job Details Responsibilities: Program/troubleshoot PLC software and hardware.
Interpret PLC ladder logic & machine sequence of operation Troubleshoot/diagnose/repair electrical, electronic and mechanical, pneumatic and hydraulic equipment, components, and robotic systems Perform preliminary equipment inspections, run conduit and terminate wiring, install pneumatic lines, perform Point-to-Point wiring verifications Calibrate weight systems, transmitters, transducers, indicators, readouts, and tune control loops Complete shop records and use reporting system following established procedures as required for effective performance of the job or operation of the department Maintain a safe work environment Qualifications: AS in Mechanical or Electrical (preferred) Certificate in Industrial Maintenance 1 year of experience in manufacturing environment Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
jobs by
✓ All jobs loaded