Colliers Engineering Design Jobs in Usa
7,156 positions found — Page 10
Citizen, U.Person, or Immigration Status Requirements:
S. government issued security clearance is required. S. citizens are eligible for a security clearance Security Clearance Type:
Secret Security Clearance Status:
Active and existing security clearance required after day 1
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. Raytheon’s RF & Microelectronics Center is responsible for full-scope Independent Design, Verification & Validation (IV&V) solutions for microwave products, including architecture trades, design, layout, development, integration, deployment, and sustainment of antenna systems and associated integrated system verification solutions. Within the RF & Microelectronics Center, the Airborne Antenna Design Department is a team of engineers responsible for electrical design and development of RF products within Raytheon. Our charter is to provide expertise in sub-systems engineering, RF and radome design, digital apertures, antenna ranges and module test.
Join our Airborne Antenna Design Department as an RF Design Engineer II and be at the forefront of cutting-edge technology with the opportunity to make a significant impact. Design, develop, and sustain state-of-the-art Transmit/Receive (T/R) microwave products (modules, TRIMMs, planar arrays, etc).
Implement best practice standards with regard to the planning, coordination, and implementation of microwave design and test with sound engineering process discipline and leadership.
Interface with factory, program, and customer personnel to implement design improvements.
Support factory troubleshooting, analyze product defect trends, and implement process/product improvements in alignment with factory and program production needs.
This 1st shift role will be 100% on-site and based in McKinney, TX.
Experience with data analysis using MATLAB.
S. government issued security clearance is required. S. citizens are eligible for a security clearance.
MS in Electrical Engineering is a PLUS.
RF/Microwave Design Verification Test (DVT) experience with network/spectrum analyzers and/or antenna measurement systems.
Experience using Keysight ADS and Mentor Graphics Xpedition design software.
Experience with PWB and CCA processes for hybrid designs incorporating digital, power, and RF circuitry.
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. This position offers relocation based on candidate eligibility.
Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
S. citizens are authorized to access information under this program/contract. Security Clearance:
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. At Raytheons Optics Manufacturing Center, the Manufacturing Engineering team plays a critical role in sustaining our competitive edge in the design and production of complex optical components, assemblies, and systems. We are responsible for driving operational excellence—ensuring high-quality product delivery that meets schedule, cost, and safety targets.
The Manufacturing Engineering team at our facility in Richardson TX seeks a highly skilled and motivated Optics Manufacturing Engineer to join our team. Relocation benefits are available. This is a unique opportunity to contribute to the production of advanced optical elements using state-of-the-art grinding and polishing technologies.
( Provide engineering support for the fabrication and metrology of high-precision optical windows, lenses and prisms.
Develop and document robust manufacturing process plans that meet complex optical and mechanical specifications, while optimizing for cost, throughput, quality, and yield.
Interpret and verify conformance of engineering drawings, specifications, work instructions, and test procedures to applicable internal and external standards.
Support bid and proposal efforts by estimating time and resources required for manufacturing activities.
Drive continuous improvement initiatives through data analysis and process optimization.
Collaborate closely with manufacturing technicians on the factory floor to resolve production issues in real time.
Specify, procure, and validate production and metrology equipment required for optical manufacturing and testing.
Lead root cause analysis and corrective action (RCCA) efforts for product or process failures using structured problem-solving tools such as 5 Whys and Fishbone.
Interface with cross-functional teams, program management, and customers to provide technical guidance, ensure requirements compliance, and support key project milestones.
First / day shift position.
Bachelor’s degree in Science, Technology, Engineering, or Mathematics (STEM) or equivalent, with a minimum of 2 years of relevant engineering experience.
Relevant experience is providing engineering support in a precision optics manufacturing environment.
Work history in optical manufacturing processes, including grinding, pitch polishing, and/or pad polishing techniques.
Hands-on experience operating planetary and spindle polishing machines for optical fabrication.
Advanced degree (MS/PhD) in Mechanical Engineering, Precision Engineering, or a related field.
Reading and interpreting engineering drawings that utilize GD&T standards and translating them into appropriate manufacturing steps.
Hands-on expertise in operating and programming 3-axis and/or 5-axis CNC equipment using CAM software MasterCAM or comparable platforms.
Setting up machines, executing initial runs, troubleshooting issues, and conducting post-machining inspections.
Creating and evaluating CAD models using Creo, SolidWorks, or similar CAD software.
Conducting root cause analysis and implementing effective corrective actions.
Developing clear and detailed technical documentation to support manufacturing operations.
Adapting work hours as needed to meet business and production demands.
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. Relocation offered.
This includes all production and maintenance employees, as they are essential to the development of our products.
#As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
S. citizens are authorized to access information under this program/contract. Security Clearance:
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. At Raytheons Optics Manufacturing Center, the Manufacturing Engineering team plays a critical role in sustaining our competitive edge in the design and production of complex optical components, assemblies, and systems. We are responsible for driving operational excellence—ensuring high-quality product delivery that meets schedule, cost, and safety targets.
The Manufacturing Engineering team at our facility in Richardson TX seeks a highly skilled and motivated Optics Manufacturing Engineer to join our team. Relocation benefits are available. This is a unique opportunity to contribute to the production of advanced optical elements using state-of-the-art grinding and polishing technologies.
( Provide engineering support for the fabrication and metrology of high-precision optical windows, lenses and prisms.
Develop and document robust manufacturing process plans that meet complex optical and mechanical specifications, while optimizing for cost, throughput, quality, and yield.
Interpret and verify conformance of engineering drawings, specifications, work instructions, and test procedures to applicable internal and external standards.
Support bid and proposal efforts by estimating time and resources required for manufacturing activities.
Drive continuous improvement initiatives through data analysis and process optimization.
Collaborate closely with manufacturing technicians on the factory floor to resolve production issues in real time.
Specify, procure, and validate production and metrology equipment required for optical manufacturing and testing.
Lead root cause analysis and corrective action (RCCA) efforts for product or process failures using structured problem-solving tools such as 5 Whys and Fishbone.
Interface with cross-functional teams, program management, and customers to provide technical guidance, ensure requirements compliance, and support key project milestones.
First / day shift position.
Bachelor’s degree in Science, Technology, Engineering, or Mathematics (STEM) or equivalent, with a minimum of 2 years of relevant engineering experience.
Relevant experience is providing engineering support in a precision optics manufacturing environment.
Work history in optical manufacturing processes, including grinding, pitch polishing, and/or pad polishing techniques.
Hands-on experience operating planetary and spindle polishing machines for optical fabrication.
Advanced degree (MS/PhD) in Mechanical Engineering, Precision Engineering, or a related field.
Reading and interpreting engineering drawings that utilize GD&T standards and translating them into appropriate manufacturing steps.
Hands-on expertise in operating and programming 3-axis and/or 5-axis CNC equipment using CAM software MasterCAM or comparable platforms.
Setting up machines, executing initial runs, troubleshooting issues, and conducting post-machining inspections.
Creating and evaluating CAD models using Creo, SolidWorks, or similar CAD software.
Conducting root cause analysis and implementing effective corrective actions.
Developing clear and detailed technical documentation to support manufacturing operations.
Adapting work hours as needed to meet business and production demands.
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. Relocation offered.
This includes all production and maintenance employees, as they are essential to the development of our products.
#As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.
As a Sr. FPGA Design Engineer at Reliable Robotics you will be a part of the Embedded Systems team which owns the firmware and software at the heart of the Reliable Robotics autonomy stack. We are a creative and diligent team that provides dependable computing, networking, signal processing, and motor control solutions to bring our aircraft to life. Your contributions will directly enable development of our flight computer and air to air RADAR, unlocking higher-level capabilities, and setting the stage for product certification & delivery to market.
Responsibilities
In your role as an FPGA Design Engineer, you will work in a highly collaborative and cross-functional development environment including mutual peer review to maintain high product quality. This work will include FPGA requirements, design, and simulation as well as code synthesis, hardware integration, and test support. You will contribute to multiple FPGA projects in support of the long-term Reliable Robotics technology roadmap.
Basic Success Criteria
Bachelor's degree in Electrical Engineering, Computer Engineering, or equivalent
8+ years of full-cycle electronics hardware development experience in a professional environment
Professional experience designing FPGA digital logic using industry-standard design, simulation, and synthesis tools
Preferred Criteria
Advanced degree in Electrical Engineering, Computer Engineering, or equivalent
Proven track record of product ownership including development and field support
Experience with safety-critical FPGA development (DO-254 level A/B or equivalent industry standard)
Experience architecting, implementing, and verifying fixed point DSP algorithms
Comfortable with a fast-paced, agile/iterative development life cycle
Pragmatic, results-oriented work style
FPGA designers at Reliable Robotics have a unique opportunity to work within a vertically integrated technology stack that extends up to the aircraft level, with a direct impact on the aircraft's capabilities and requirements. They execute a focused mission to establish the foundation of Reliable's technology roadmap. We are a fast-paced team that gets results. With your experience, motivation, skills, and enthusiasm, you'll help the team accomplish amazing things.
Employees working from our headquarters in Mountain View, CA may expect very little travel.
The estimated salary range for this position is $215,000 to $300,000/annual salary + cash and stock option awards + benefits. At Reliable Robotics, we strive to provide competitive and rewarding compensation based on experience and expertise, as well as market conditions, location, and pay equity.
In addition to base compensation, Reliable Robotics offers stock options, employee medical, 401k contribution, great co-workers and a casual work environment.
This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.
All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.
At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.
If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to
Compensation Range: $215K - $300K
Apply for this JobWe're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.
As an FPGA Design Engineer at Reliable Robotics you will be a part of the Embedded Systems team which owns the firmware and software at the heart of the Reliable Robotics autonomy stack. We are a creative and diligent team that provides dependable computing, networking, signal processing, and motor control solutions to bring our aircraft to life. Your contributions will directly enable development of our flight computer and air to air RADAR, unlocking higher-level capabilities, and setting the stage for product certification & delivery to market.
Responsibilities
In your role as an FPGA Design Engineer, you will work in a highly collaborative and cross-functional development environment including mutual peer review to maintain high product quality. This work will include FPGA requirements, design, and simulation as well as code synthesis, hardware integration, and test support. You will contribute to multiple FPGA projects in support of the long-term Reliable Robotics technology roadmap.
Basic Success Criteria
Bachelor's degree in Electrical Engineering, Computer Engineering, or equivalent
4+ years of full-cycle electronics hardware development experience in a professional environment
Professional experience designing FPGA digital logic using industry-standard design, simulation, and synthesis tools
Preferred Criteria
Advanced degree in Electrical Engineering, Computer Engineering, or equivalent
Proven track record of product ownership including development and field support
Experience with safety-critical FPGA development (DO-254 level A/B or equivalent industry standard)
Experience architecting, implementing, and verifying fixed point DSP algorithms
Comfortable with a fast-paced, agile/iterative development life cycle
Pragmatic, results-oriented work style
FPGA designers at Reliable Robotics have a unique opportunity to work within a vertically integrated technology stack that extends up to the aircraft level, with a direct impact on the aircraft's capabilities and requirements. They execute a focused mission to establish the foundation of Reliable's technology roadmap. We are a fast-paced team that gets results. With your experience, motivation, skills, and enthusiasm, you'll help the team accomplish amazing things.
Employees working from our headquarters in Mountain View, CA may expect very little travel.
At Reliable Robotics, we strive to provide competitive and rewarding compensation based on experience and expertise, as well as market conditions, location, and pay equity.
In addition to base compensation, Reliable Robotics offers stock options, employee medical, 401k contribution, great co-workers and a casual work environment.
This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.
All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.
At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.
If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to
Compensation Range: $185K - $245K
Apply for this JobVice President of Engineering
Overview:
Seeking a strategic, hands-on Vice President of Engineering to lead and grow a high-performing MEP team supporting mission-critical, data centers, and large-scale infrastructure projects. This role will drive technical excellence, team development, and project delivery across complex engineering initiatives.
Key Responsibilities:
- Set technical direction and lead multidisciplinary MEP engineering teams
- Ensure high-quality, code-compliant, and constructible designs
- Mentor and develop engineering leaders, fostering accountability and performance
- Partner with project managers and clients to deliver projects on time and on budget
- Drive innovation across design processes, tools, and sustainable practices
Qualifications:
- 15+ years of MEP engineering experience, including 8+ years in leadership
- Master’s degree in Mechanical or Electrical Engineering
- Professional Engineer (PE) license required
- Strong expertise in complex systems, design standards, and tools such as Revit
- Proven track record of building teams and delivering large-scale projects
*Opportunity available in Austin, TX or Phoenix, AZ. Relocation assistance provided*
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
The Boeing Defense Space & Security (BDS) has an exciting opportunity for an Electrical Design and Analysis Engineer (Experienced-Senior) for the Flight Simulation Labs - Hardware Interface Systems team located in Berkeley, MO.
The Flight Simulation Labs organization has expertise supporting marketing, design, development, integration, test and training objectives for Boeing military aircraft.
As an Electrical Design and Analysis Engineer (Experienced-Senior), you will create and implement solutions to complex problems that support design, development, and execution of simulation environments in development labs for the F-15 Israel program. This position will support the project execution for the full product design life cycle including: requirements, design, acceptance test procedures, and associated engineering maintenance support. This position is expected to be 100% onsite and engaged with our customers and the product. The selected candidate will be required to work onsite at one of the listed location options.
Position Responsibilities:
Works with customers to develop and document complex electronic and electrical system requirements.
Analyzes and translates requirements into system, hardware and software designs and interface specifications.
Tests and validates to ensure system designs meet operational and functional requirements.
Monitors supplier performance to ensure system integration and compliance with requirements.
Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
Research specific technology advances for potential application to company business needs.
Basic Qualifications (Required Skills and Experience):
Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
Level 3: 5+ years of work related experience and a bachelor’s degree or an equivalent combination of work related experience and technical education
Level 4: 9+ years of work related experience and a bachelor’s degree or an equivalent combination of work related experience and technical education
Preferred Qualifications (Desired Skills and Experience):
Electrical engineering experience
Experience in avionics, electrical, and/or a mission systems role
Experience developing or integrating avionics or mission systems
Experience in Agile Software Development and JIRA
Experience managing projects and utilizing standard project management tools
Conflict of Interest:
Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.
Drug Free Workplace:
Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:
Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.
Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range:
Level 3: $112,200-$151,800
Level 4: $136,850-$185,150
Applications for this position will be accepted until Mar. 27, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Relocation
This position offers relocation based on candidate eligibility.
Security Clearance
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
The Boeing Defense Space & Security (BDS) has an exciting opportunity for an Electrical Design and Analysis Engineer (Experienced-Senior) for the Flight Simulation Labs - Hardware Interface Systems team located in Berkeley, MO.
The Flight Simulation Labs organization has expertise supporting marketing, design, development, integration, test and training objectives for Boeing military aircraft.
As an Electrical Design and Analysis Engineer (Experienced-Senior), you will create and implement solutions to complex problems that support design, development, and execution of simulation environments in development labs for the F-15 Israel program. This position will support the project execution for the full product design life cycle including: requirements, design, acceptance test procedures, and associated engineering maintenance support. This position is expected to be 100% onsite and engaged with our customers and the product. The selected candidate will be required to work onsite at one of the listed location options.
Position Responsibilities:
Works with customers to develop and document complex electronic and electrical system requirements.
Analyzes and translates requirements into system, hardware and software designs and interface specifications.
Tests and validates to ensure system designs meet operational and functional requirements.
Monitors supplier performance to ensure system integration and compliance with requirements.
Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
Research specific technology advances for potential application to company business needs.
Basic Qualifications (Required Skills and Experience):
Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
Level 3: 5+ years of work related experience and a bachelor’s degree or an equivalent combination of work related experience and technical education
Level 4: 9+ years of work related experience and a bachelor’s degree or an equivalent combination of work related experience and technical education
Preferred Qualifications (Desired Skills and Experience):
Electrical engineering experience
Experience in avionics, electrical, and/or a mission systems role
Experience developing or integrating avionics or mission systems
Experience in Agile Software Development and JIRA
Experience managing projects and utilizing standard project management tools
Conflict of Interest:
Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.
Drug Free Workplace:
Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:
Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.
Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range:
Level 3: $112,200-$151,800
Level 4: $136,850-$185,150
Applications for this position will be accepted until Mar. 27, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Relocation
This position offers relocation based on candidate eligibility.
Security Clearance
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
TRAVEL: At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact peoples lives around the world today, and for generations to come. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work — and we have an insatiable drive to do what others think is impossible. In rapidly changing global security environments, Northrop Grumman brings informed insights and software-secure technology to enable strategic planning. We’re looking for innovators, who can help us keep building on our wide portfolio of secure, affordable, integrated, and multi-domain systems and technologies that fuel those missions. By joining in our shared mission, we will support yours of expanding your personal network and developing skills, whether you are new to the field or an industry thought-leader. Networking Technology Professionals, We Want You!
The Northrop Grumman Classified Solutions team is seeking a highly experienced Senior Network Administrator to join its dynamic team of technical professionals. Note: Due to the classified nature of the work being performed, this position does not offer any virtual or telecommute working options. Applicants are encouraged to apply, only if they are willing to work on-site.
Maintain smooth operation of classified networks - LAN/WAN environments.
Plan, design, configure, and install network hardware in support of customer requirements.
Maintain technical expertise in all areas of networks and computer hardware / software interconnection, as well as interfaces, including routers, multiplexers, firewalls, switches, gateways, etc.
Create and ensure that appropriate network documentation exists, including operational instructions.
Provide regular monitoring, and network analysis, regarding short and long-range planning for [in-house] systems. May coordinate third-party maintenance for network equipment.
Design networks, or portions of networks, including the selection of hardware and software packages.
May coordinate third-party maintenance for network equipment.
Represent the organization in providing solutions to difficult technical issues associated with specific projects.
The successful applicant will demonstrate the ability to work in a team environment with engineering users, other network administrators, systems administrators, and computer/facility organizations.
Plan, manage and implement complex network designs in support of customer requirements.
Support network teams in project designs to clarify project requirements, provide design solutions, in accordance with standards.
Perform troubleshooting analysis of network infrastructure and associated systems.
Document network hardware and software technology components.
Implement and troubleshoot LAN technologies such as VLANs, trunking (port tagging), spanning-tree and protocols.
Provide third-level support and troubleshooting of network problems.
On occasion may provide after-hours and weekend support.
Interface regularly with customers and manage customer installation timelines and deliverables to help facilitate successful deployments.
Experience with HAIPE/TACLANE and other military COMSEC/CRYPTO equipment and procedures.
Experience in the use of network analysis tools (i.e. Experience with Microsoft Office, Visio, Project, PowerPoint and Excel is required
Lift equipment weighing up to 40 pounds as needed
Ability to work after hours, and weekends as needed
OR a Bachelors Degree with 8 years of experience; OR a High School Diploma (or equivalent) with 12 years of IT experience is required
Must have a DOD 8570 IAT level 2 baseline certification (example: Candidates must have a current and fully adjudicated DOD Top Secret level security clearance (at a minimum) in order to be considered
Candidates must have the ability to obtain, and maintain, a Top Secret/SCI level security clearance as a condition of employment
Experience designing and maintaining LAN & WAN based networks, managing routing protocols on large LAN environments, and experience with Cisco hardware (routers, switches, and firewalls)
Bachelor’s degree Network Engineering
Active Top Secret/SCI, Polygraph, or SAP/SAR access would be nice to have
Network+ certification and/or either a CCNP or a CCIE certification
Network design, analysis, and administration of routers, switches, hubs, and firewalls
Experience in the use of network analysis tools (i.e. Previous experience troubleshooting network procedures and best practices; experience with network challenges associated with systems integration, including COTS integration, capacity analysis and system architecture design
We offer flexible work arrangements, phenomenal learning opportunities, exposure to a wide variety of projects and customers, and a very friendly team environment. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.
The application period for the job is estimated to be 20 days from the job posting date. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class.
Rite-Hite is the global leader in the manufacture and distribution of industrial loading dock and door equipment. Our innovative products and world class sales organization ensure solid, consistent growth, both for our company and our staff. We are always looking ahead to develop innovative new products and services to improve our customers' safety, security, and productivity.
What We Offer:Rite-Hite provides competitive compensation and a comprehensive benefits package with medical, dental, and vision coverage along with life and paid medical leave. We also provide a retirement savings plan that combines 401(K) with company match and profit sharing. Paid holidays, vacation, and up to five paid personal/sick days per year round out the package.
Rite-Hite is an Equal Opportunity/Affirmative Action employer offering a drug free workplace for our customers and employees.
Job Description:We are seeking a motivated and detail-oriented Industrial Systems Engineering Intern to join our team at our manufacturing facility in Dubuque, IA. In this role, you will support engineering staff in improving industrial systems, processes, workflows, and equipment performance. This internship provides hands-on experience with real-world industrial engineering applications and offers the opportunity to apply academic knowledge to optimize efficiency, productivity, and system reliability in a professional environment.
Essential Duties and Responsibilities
- Assist engineers with the analysis, design, and optimization of industrial systems, including production processes, material flow, and equipment layouts.
- Perform data collection, time studies, workflow analysis, and documentation to support ongoing systems improvement projects.
- Create, update, and review process maps, workflow diagrams, standard operating procedures (SOPs), and technical reports.
- Conduct research on industrial equipment, automation technologies, lean methodologies, and process improvement techniques.
- Support troubleshooting, root-cause analysis, and quality evaluations within manufacturing or operational processes.
- Participate in team meetings, kaizen events, design reviews, and technical presentations.
- Adhere to company safety procedures, industrial engineering standards, and best-practice guidelines.
Education and/or Experience
- Currently pursuing a bachelor's degree in Industrial Engineering, Industrial & Systems Engineering, Manufacturing Engineering, or a related field.
- Strong analytical, mathematical, and problem-solving skills.
- Familiarity with industrial engineering tools, measurement methods, data analysis techniques, or simulation software.
- Effective communication and teamwork abilities.
- Willingness to learn, adapt, and contribute in a fast-paced industrial environment.
Preferred Qualifications
- Experience with tools such as AutoCAD, SolidWorks, MATLAB, Python, Arena/Simio simulation software, or statistical analysis tools (e.g., Minitab).
- Prior project, lab, or internship experience in process improvement, manufacturing systems, operations research, or automation.
- Knowledge of lean manufacturing concepts, Six Sigma methodologies, ergonomic principles, or relevant industrial standards.
Additional Job Information:
