Collaborative Filtering Algorithm Jobs in Usa

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Composite Fabricator to join our Fabrication team in Everett and Renton, Washington.

As a Composite Fabricator, you will play a vital role in ensuring the highest standards of quality and safety in the production of non-metallic components for our Airplanes. Your expertise will be essential in fabricating and assembling parts with precision, utilizing various methods and equipment while adhering to established safety protocols. You will be responsible for maintaining a safe working environment, ensuring that all processes meet rigorous quality specifications. Your attention to detail and commitment to excellence will directly impact the integrity of our products.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Fabricate, assemble, rework, repair, and finish a variety of non-metallic parts, tools, and assemblies to specifications using methods such as layup, foaming, bonding, molding, and drap forming.

• Operate mixers, impregnating equipment, heat treaters, curing equipment, formers, presses, and ovens according to established procedures, as well as various cutting equipment for flat pattern cuts of composite materials.

• Collaborate with Manufacturing and Engineering to provide input on design optimization for developmental and emergent projects.

• Utilize prints, charts, change notices, sketches, work orders, and engineering drawings to complete work assignments effectively.

• Impregnate materials and cut fabrics to size using appropriate tools such as knives and shears.

• Hand and machine finish parts to required tolerances, ensuring proper fit within completed assemblies.

• Sand and polish molds to achieve smooth surfaces and wrap mandrels with impregnated materials to meet specifications.

• Place vacuum bags over wrapped parts, test for leaks, and seal any identified leaks in pressure and vacuum bags.

• Prepare and apply protective materials, lacquers, and parting agents to molds, forms, and dies.

• Load, unload, and operate ovens, presses, and pressure bags during the curing process of parts and assemblies.

• Drill, trim, seal, part-mark, sand, and edge break parts to meet production requirements.

• Select and secure appropriate tools, fixtures, and equipment to accomplish assigned work.

• Use shop mathematics and precision measuring instruments to ensure accuracy in work assignments.

• Perform Total Preventive Maintenance (TPM) on equipment, including cleaning, oiling, greasing, and changing filters to maintain optimal operation.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.62 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 3 months or more reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).

• 3 months or more with structure materials and processes including metals, composites, bonded and bolted joints.

• 3 months or more experience accessing a database for details work instructions.

• 3 months or more experience using precision measuring tools (i.e. micrometers, calipers, depth gauges, etc.).

• 3 months or more experience in composite fabrication.

• Must be able to lift, push, pull up to 35 pounds frequently within an 8 hour shift.

• Must be able to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
  
   

Preferred Qualifications:

• Comfortable working from high/exposed places, tight spaces and working from ladders.

• Ability to work in noisy environments while completing tasks.

Conflict of Interest:
Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

 

Relocation:

Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

 

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

 

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

 

Shift Work Statement :

This position is for a variety of shifts.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

 

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

 

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay : $24.32/hour, with potential to earn up to $48.90/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 31, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our strategic plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting Faculty may require meeting the needs of two careers.

About Georgia Tech

Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's Faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and is No. 1 among institutions without a medical school.

Georgia Tech's Mission and Values

Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do:

1. Students are our top priority.

2. We strive for excellence.

3. We thrive on diversity.

4. We celebrate collaboration.

5. We champion innovation.

6. We safeguard freedom of inquiry and expression.

7. We nurture the well-being of our community.

8. We act ethically.

9. We are responsible stewards.

Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good, breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact.

Housing and Residence Life is passionate about the Georgia Tech residential student experience. With 97% of all first-year students choosing to live on campus, we create spaces and opportunities for Yellow Jackets to grow and connect from their first day of college through their graduate studies. We are proud to support our students personal development and academic endeavors while providing a safe and comfortable living environment.

Our department is a large and complex organization supporting over 8,700 on-campus residents among 49 traditional halls, suites, and apartments, some of which were constructed for the 1996 Summer Olympics. Our team of 200+ professional staff and 300+ student staff from six departments supports residents directly and indirectly with their unique talents. We are housed within the Student Engagement and Well-Being division, which includes many student service offices.

Mission

Housing and Residence Life offers quality, safe, well-maintained residential facilities. We encourage, promote, and facilitate customer-focused programs and services that attract students to our facilities and Georgia Tech. We provide physical, programmatic, and technological systems to enhance the quality of life on campus, support the academic needs of resident students, and complement the academic goals of the institute.

• This position will interact on a consistent basis with: Facilities co-workers, building contact personnel, D&C staff, vendors, contractors, environmental health and safety personnel and utility providers.
• This position typically advises and counsels plumbers and maintenance workers. This position will supervise: NA.

Preferred Educational Qualifications
Technical Diploma in plumbing or mechanical field

Pay Range: $23.78-$32.34/hr.

The University System of Georgia is comprised of our 26 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at policymanual/section8/C224/#p8.2.18_personnel_conduct.

Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at policymanual/section6/C2653.

The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The Institute is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and Institute policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities.

Equal opportunity and decisions based on merit are fundamental values of the University System of Georgia (USG) and Georgia Tech. Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of an individuals race, ethnicity, ancestry, color, religion, sex (including pregnancy), national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract.

More information on these policies can be found here: policymanual/section6/c2714 Board of Regents Policy Manual | University System of Georgia ( ).

The candidate of choice will be required to pass a pre-employment background screening. employment/pre-employment-screening.

Position Description

Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Auto and Diesel Technician to support our Truck Fleet in Dallas, Texas

Hear it from a Torque Mobile Mechanic Technician Here:

• 
  
• Technician Positions Pay Each Week
  
  
• Hourly Pay: $38.00 per hour
  
  
• Retention Bonus: $2000 paid every quarter within the first year
  
  
• Schedule: Flexible 40-hour work week (weekend premiums apply)
  
  
• Fuel Card and Company Cell Phone provided
  
  
• For mobile technicians, work site service vehicle will be provided
  
  
• Grow with Ryder: This position provides additional training to level up.
  
  

We want the right Maintenance Repair Mechanic Technician to join us at Ryder to manage our fleet of Heavy Duty Trucks.

Apply Here with Ryder Today

Spots are filling fast — click apply now to secure your spot.

Questions? Call Kim or text “Dallas” to 9 to speak with your recruiter today.

All the benefits you expect — without the wait.

• 
  
• Medical, Dental, Vision after 30 days
  
  
• 80 hours PTO your first year, starting Day 1
  
  
• Yearly merit pay increases
  
  
• 401 (k) company match
  
  
• PPE, uniforms, and boot allowance
  
  
• Build your skills - paid training
  
  
• Safety‑first workplace & State-of-the-art equipment
  
  
• Top Tech Competition: Earn $250 – $50,000 per year
  
  
• U.S. military veterans - extra paid day off
  
  
• 15% company stock discount
  
  
• Up to $5,000 in Tech tuition repayment
  
  
• 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure)
  
  
• Employee discounts on tools, vehicles, travel, tech & more
  
  

Apply today and see why a job with Ryder is what you’ve been looking for. Call us or go online to apply to one of our career opportunities

Click Here to See All Ryder Careers:

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High school diploma or equivalent preferred
  
  
• Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
  
  
• Basic tools, required
  
  
• Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
  
  
• Routine preventative maintenance, which should include oil changes, brake and tire work
  
  
• Diagnostics and repairs, including AC, electrical systems
  
  
• Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs
  
  
• Four (4) years or more Relevant work experience, preferred
  
  
• NonCommercial Driver License CLASS E, preferred
  
  
• Valid Commercial Driver License (CDL) CLASS A, preferred
  
  
• Other State driver's license, as required
  
  
• Four (4) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment
  
  
• Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02
  
  
• Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents
  
  
• Must be able to drive Ryder vehicles
  
  
• Ability to:
  
  
• Understand and adhere to Company policies in all areas
  
  
• Complete repair orders with the Company established systems
  
  
• Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors)
  
  
• Work independently and as a member of a team
  
  
• Prioritize workload
  
  
• Proven hands-on mechanic, customer service, and account management skills
  
  
• Demonstrates customer service skills
  
  
• Strong verbal and written communication skills
  
  
• Flexibility to operate and self-driven to excel in a fast-paced environment
  
  
• Self-starter and self-sufficient approach
  
  
• Capable of multi-tasking, highly organized, with excellent time management skills
  
  
• Detailed oriented with excellent follow-up practices
  
  
• Entrepreneurial spirit
  
  
• Preventive Maintenance (PM230&PM298) within 90 Days
  
  
• Brakes-Air (BA220&BA298) within 90 Days
  
  
• Brake mechanics/inspectors FMCS 396.25
  
  
• Hydraulic Brake (BH220&BH298) where appropriate within 90 Days
  
  
• Tire & Wheel TW220 within 90 Days
  
  
• CF609 & A/C trained and qualified (AC220&AC298) within 180 Days
  
  
• HD electrical - DR208 within 90 Days
  
  
• Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days
  
  
• Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix)
  
  
• This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
  
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Decision making: Responsible for making decisions surrounding vehicle diagnostics and repair
  
  
• Performs vehicle maintenance and repair duties including: standard vehicle maintenance, preventive maintenance, complex repairs with minimal (if any) support
  
  
• Demonstrate the ability to access and use internal and external maintenance documents - Diagnoses and repairs complex mechanical and electronic problems with minimal (if any) support, utilizing diagnostic computers/software when applicable
  
  
• Performs remote triage to with RCRC and customers to determine best solution to assist roadside breakdowns
  
  
• Performs facility maintenance duties
  
  
• Interacts with customers/drivers to properly determine nature of complaint once assigned a task
  
  
• Instructs and advises other technicians regarding maintenance repair procedures and diagnostics
  
  
• Interact with non-contractual customers, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction.
  
  
• Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:
  
  
• A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks
  
  
• Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified
  
  
• Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes
  
  
• Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions
  
  
• Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check
  
  
• Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation
  
  
• Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems
  
  
• Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables
  
  
• Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights
  
  
• Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers
  
  
• Driveline: Lubricate drive line; Inspect components for wear or damage
  
  
• Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks
  
  
• Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition
  
  
• Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors
  
  
• Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal
  
  
• Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc
  
  
• Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298)
  
  
• Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism
  
  
• Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents
  
  
• Performs other duties as assigned.
  
  
• Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements.
  
  
• Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer.
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 2 days ago (3/17/2026 1:49 PM)

Requisition ID 2

Location (Posting Location) : State/Province TX

Location (Posting Location) : City DALLAS

Location (Posting Location) : Postal Code 75247

Category Technicians/Service Employees9

Employment Type Regular-Full time

Travel Requirements Greater than 60%

Position Code 1001374

Min Pay USD $38.00/Hr.

Max Pay USD $38.00/Hr.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

Our Mission is to develop best in industry technologies that align product capabilities to the needs of our customer. We will empower our people to leverage design commonality and innovation, balancing risk and rigor, to achieve predictable and affordable solutions. We are looking for candidates willing to collaborate, innovate, and team with our engineers to generate and utilize today’s cutting-edge technology.

Effector Guidance Electronics is responsible for designing RF and Microwave hardware, including transmitters, receivers, and exciters.  This includes design and test activities that span preliminary design to integration.  Products we develop support radar and datalink applications on a variety of tactical missile programs.  Critical to this role is designing for challenging mechanical constraints and extreme environments.

What You Will Do

• Design and development of transmitters, receivers or exciters

• Design of circuit card assemblies (CCAs) with RF or mixed signals

• Work in a lab to accomplish component characterization as well as module verification and integration

• Test and handle sensitive RF Hardware

• Schematic capture and RF routing

• Partner with interdisciplinary teams - power, digital, mechanical, etc.

Qualifications You Must Have

• Typically requires a Bachelors Degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years of prior relevant experience

Minimum of two years of prior relevant experience to include any combination of the following:

• RF design and fabrication

• RF test and troubleshoot

• Simulation of RF products

• Experience with any of the following tools: Mentor DX Designer or equivalent, High Frequency Structure Simulator (HFSS) or equivalent, SystemVue/Genesys or equivalent, Advanced Design System (ADS)

Qualifications We Prefer

- Technical background in some of the following areas:

• Cascade analysis and/or frequency planning

• Filter design and fabrication

• Circuit card assembly design and fabrication

• Testing or designing RF hybrid (chip and wire) technologies

• High speed data converter test/characterization

• High power RF design or test experience

• Scripting experience (MATLAB or Python)

- Working across domains on complex projects

- Ability to prepare documentation with minimal oversight

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

This position is 100% onsite in Hunstville, AL and is eligible for relocation assistance.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is seeking a Mechanical Hydraulics Design & Analysis Engineer (Associate or Experienced) to join our team of highly skilled and passionate engineers in Renton, Washington.

Position Overview:

The ideal candidate will have technical expertise, leadership skills, and a commitment to quality to positively impact the design of Mechanical Hydraulic Systems. The candidate will join a team that supports the development and documentation of Mechanical Hydraulic Systems design and provides production and customer support to Mechanical Hydraulic Systems in the Factory, Flight Line, and Delivery Center for 737 and P-8. Systems and components include hydraulic pumps, reservoirs, accumulators, motor operated valves, landing gear, wheels, tires & brakes. 

The qualified candidate must have the ability to work in a fast-paced, dynamic environment, and have excellent verbal and written communication skills. The candidate will need to effectively collaborate with others in a team environment and use leadership, creativity, engineering judgement, and problem-solving skills to address a diverse range of engineering problems and fully integrate design solutions. Our team is currently hiring for a broad range of experience levels including Associate and Mid-Level Engineers.

Position Responsibilities:

• Supports the development and documentation of Mechanical Hydraulic systems to establish system design

• Utilize CATIA to model Mechanical Hydraulic systems and develops and documents system requirements 

• Identifies problems, performs root cause corrective analysis, and implements corrective actions utilizing the Boeing Program Solving Method (BPSM)

• Performs and documents analysis to validate and verify that systems and components meet operational functional requirements and specifications

• Monitors supplier performance to ensure system integration and compliance with requirements

• Identifies design improvements and researches specific technology advancements for potential application to meet company business needs

Work Authorization:

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at Renton, WA location.

Basic Qualifications (Required Skills/Experience):

• Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences)

• Experience working in an engineering discipline

Preferred Qualifications (Desired Skills/Experience):

• 3+ years of related work experience or an equivalent combination of education and experience.

• Experience in design, analysis, verification, validation, and requirements development of Mechanical Hydraulic systems

• Experience in Hydraulics, Fluid systems, Pressurized reservoirs/tanks, motor operated valves, and filters

• Aircraft Landing gear design experience

Conflict of Interest:

Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union:

This is a union-represented position.

Pay and Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary Pay Range:

• Associate (Level 2): $91,000 - $123,000

• Experienced (Level 3): $111,000 - $151,000

Additional Information:

• All information provided will be checked and may be verified.

Applications for this position will be accepted until Mar. 23, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

Our Mission is to develop best in industry technologies that align product capabilities to the needs of our customer. We will empower our people to leverage design commonality and innovation, balancing risk and rigor, to achieve predictable and affordable solutions. We are looking for candidates willing to collaborate, innovate, and team with our engineers to generate and utilize today’s cutting-edge technology.

This position is an onsite role, located in Tucson, AZ.

What You Will Do:

• Responsible for Printed Circuit Board (PCB) designs from conception to manufacturing

• Creation of the PCB, Circuit Card Assembly (CCA), and Schematic drawings for suppliers

• Schematic Capture, Component Placement, Routing of Traces, Gerber/ODB++ file creation

• Utilize software such as Siemens: Xpedition Enterprise and DownStream Technologies: BluePrint-PCB

• Design layouts include Rigid, Flex, and Rigid-Flex assemblies

• Work designs to include full designs, re-spins, drawing updates, change notices, copper changes, and process improvement projects within and outside own discipline

• Daily interface with various engineering levels along with different engineering disciplines including, but not limited to Electrical, Mechanical, Components, Test, and Producibility Engineering disciplines to ensure that the overall design requirements are captured, keeping cost, cycle time, and producibility in mind

Qualifications You Must Have:

• Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 5 years of prior relevant experience to include any combination of the following:

  • Experience with PCB manufacturing or CCA manufacturing principles that affect circuitry and component layout with RF specific layout techniques

  • Experience with the electrical design process including RF layout

  • Experience with laying out Rigid, Flex, or Rigid-Flex boards

  • Experience with multi-layer board design

Qualifications We Prefer:

• Working knowledge of Analog, Digital including DDR, specific experience with RF, Power, and mixed technology, including multi-layer designs with High Density Interconnect (HDI) technology

• Technical PCB design skills using the Siemens design toolset including, but not limited to the Xpedition Layout tool suite with working knowledge of schematic capture, placement, routing, use of the auto-router, constraint manager, and library tools, and use of BluePrint to create complex PCB and CCA drawings, Altium is not used, but transfers over well to the Siemens toolset

• Export manufacturing data in both Gerber and ODB++ formats

• Use of Valor NPI, Design for Manufacturing rule sets, other Design Rule Checking software

• Able to understand and interpret drawings as they relate to PCB’s and CCA’s

• Familiarity with IPC 6012 & IPC 6013

• Working knowledge of military and commercial design standards, GD&T techniques, and overall producibility considerations related to electronic packaging

• Knowledge of RF circuitry and key care abouts when it come to laying out the board along with filter knowledge

• Working knowledge of operating system concepts and implementations, network services as related to Microsoft Windows suites

• Willingness to work extended hours (nights and/or weekends) as required to complete assigned tasking

• Active Secret DoD security clearance
  
   

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

This position offers relocation based on candidate eligibility.

Learn More & Apply Now!

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:

#LI-CV1

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Director of Ecommerce

A Los Angeles–based women’s fashion brand is seeking a Director of Ecommerce. This is a full-time, onsite position (5 days per week) and every other Friday, work from home. Located in the northwestern San Fernando Valley region of Los Angeles, California, CA. The ideal candidate has hands-on Shopify experience and a strong background in fashion or apparel ecommerce.

The brand is known for modern minimalism and timeless, attainable luxury, designing elevated wardrobe essentials that inspire confidence and effortless everyday style. As a digitally driven, direct-to-consumer business, ecommerce is central to how the company connects with customers and drives growth.

As the Director of Ecom, you will own the performance, optimization, and day-to-day execution of the Shopify storefront, ensuring a seamless, high-converting shopping experience that supports long-term growth.

The Role

The Director of Ecommerce is responsible for driving on-site performance through best-in-class execution, thoughtful merchandising, and data-driven optimization. Sitting at the intersection of Marketing, Operations, and Customer Experience, this role translates strategy into a polished, efficient, and revenue-generating ecommerce experience.

This is a hands-on, ownership-driven position suited to someone who understands how to scale a fashion ecommerce business through strong fundamentals, attention to detail, and continuous improvement across the full customer journey.

What You’ll Do

Ecommerce Performance & Conversion Optimization

• Own the day-to-day performance of the Shopify site
• Optimize homepage, collection pages, PDPs, cart, and checkout
• Drive improvements in conversion rate, AOV, and overall funnel efficiency
• Identify friction points across the customer journey and implement solutions
• Plan, prioritize, and execute CRO tests and site enhancements
• Partner closely with Marketing to ensure traffic lands on high-converting, on-brand experiences

Merchandising & Product Execution

• Manage collection structure, product sequencing, and on-site merchandising
• Ensure best-sellers, seasonal drops, and key campaigns are clearly and effectively surfaced
• Partner with Operations to align inventory availability with site visibility
• Support margin, sell-through, and inventory goals through thoughtful merchandising decisions
• Maintain clean, accurate, and optimized product pages at all times

Campaign & Launch Execution

• Own on-site execution for promotions, product drops, and brand launches
• QA all site updates, campaigns, and integrations prior to launch
• Ensure landing pages align with paid media, email, and SMS initiatives
• Coordinate closely with Marketing on timing, messaging, and execution

Analytics & Reporting

• Track and report on core ecommerce KPIs, including revenue, conversion rate, AOV, and funnel performance
• Monitor funnel drop-off and checkout completion
• Translate performance data into clear insights and actionable recommendations
• Deliver weekly and monthly performance reporting to leadership

Customer Experience Alignment

• Review CX feedback, returns data, and customer pain points
• Improve on-site clarity around sizing, fit, shipping, and FAQs
• Reduce avoidable CX tickets and returns through better UX, content, and site structure
• Partner with Customer Experience to continuously improve the end-to-end shopping journey

Tech Stack Ownership

• Own and optimize ecommerce tools and apps (reviews, search, bundles, CRO tools, etc.)
• Evaluate and implement tools that improve performance or operational efficiency
• Ensure site speed, stability, and reliability
• Act as the internal owner for Shopify and all related integrations

What We’re Looking For

• 5+ years of ecommerce or DTC experience (fashion or apparel strongly preferred)
• Strong Excel skills (comfortable with large spreadsheets, formulas, filters, and data validation)
• Proven, hands-on experience managing Shopify storefronts
• Track record of improving conversion rate and funnel performance
• Highly analytical with strong business and merchandising judgment
• Comfortable working cross-functionally with Marketing, Operations, and CX
• Detail-oriented, proactive, and ownership-driven
• Able to move quickly in a fast-paced environment without sacrificing quality
• Based in Los Angeles and available to work in-office in the San Fernando Valley, CA

What Success Looks Like (First 6–12 Months)

• Measurable improvements in conversion rate and checkout completion
• Cleaner, more effective product and collection pages
• Strong, reliable execution of campaigns and launches
• Clear visibility into funnel performance and optimization opportunities
• Reduced reliance on discounting through improved UX and merchandising

Growth Path

This role has a clear path to Ecommerce Director as:

• Revenue scales
• Team size grows
• Strategic ownership expands

Why You’ll Love This Role

Ecommerce is a core growth driver for this brand—not an afterthought. You’ll work closely with a collaborative, fast-moving team and have direct ownership over the online shopping experience. This is an opportunity to make a real impact at a growing fashion brand where execution, quality, and brand experience matter.

Perks & Benefits

• Health benefits (medical, dental, vision)
• 401 (k) with employer match
• Paid time off and holidays
• Employee discounts on products
• Monthly catered lunches and snacks at HQ
• Team events and brand activations
• Creative, collaborative, in-office work environment