Cms Integration Meaning Jobs in Usa

JOB SUMMARY

Master Technology Group (MTG) specializes in designing, installing, and servicing low-voltage commercial property technologies across local and national markets.

The Integrated Security Systems Technician (Traveling) provides customer-focused, workplace technology support to clients, field staff, installation partners, and internal team members. While most support work is performed remotely, occasional on-site assistance may be required locally and nationally.

Supported systems are primarily security-related, including video surveillance, access control, intrusion detection, and EAS. Additional support may encompass network programming, fire alarm systems, data infrastructure, AV, and other low-voltage disciplines.

An MTG Integrated Security Systems Technician must deliver exceptional customer service and cultivate strong professional relationships with clients, vendors, Local Service Partners (LSPs), and colleagues. This role requires technical proficiency, extensive knowledge of low-voltage systems, excellent organizational and multi-tasking skills, and strong verbal and written communication abilities.

Candidates must reside in the Twin Cities area and are expected to perform most of their work from our Eden Prairie, MN office. Periodic job site responsibilities may be required locally and nationally, with travel up to 60% supporting client sites, installations, and service operations.

To assist with critical service issues, the role includes on-call duties as part of daily responsibilities, requiring availability after hours on weekdays. Weekend on-call shifts will be rotated on a scheduled basis to ensure support during urgent weekend needs.

This position reports to the Manager of Technical Services.

KEY DUTIES AND RESPONSIBILITIES

• Support customers, coordinators, field technicians, and project managers with technical advice, troubleshooting, and resource allocation
• Collaborate with Business Development and Operations to provide pre-sales and post-sales support for MTG solutions and systems
• Deliver remote and hands-on training to field personnel to ensure compliance with all applicable codes, client specifications, and MTG’s quality standards
• Serve as an escalation point for troubleshooting, programming, maintaining, and servicing client systems
• Pre-program, build, and stage equipment for installation when practical, to streamline on-site setup
• Provide remote and on-site programming and commissioning for client systems
• Conduct remote and on-site quality assurance audits to verify system performance and installation standards
• Assist installation, service, and coordination teams with technical planning, issue resolution, and commissioning, ensuring systems operate as intended and meet MTG quality standards
• Provide user training to client representatives
• Provide technical training to field personnel and colleagues
• Contribute to continuous improvement initiatives by providing feedback to management on processes, efficiency, and client satisfaction
• Deliver outstanding customer service and build strong, professional relationships with clients, vendors, partners, and colleagues
• Other duties to support the company vision and goals as requested

QUALIFICATIONS

• Minimum of 5 years of field experience installing, configuring, programming, and servicing video, access control, and intrusion systems
• MN Power Limited Technician License (PLT) required
• Field experience with low-voltage cabling, data infrastructure, fire alarms, EAS, DAS, AV, and other workplace technology systems is advantageous
• Proven ability to design, configure, and program a variety of security-related systems
• Demonstrated experience in delivering user training to client representatives and technical training to field personnel
• Industry certifications such as NICET Video Security Systems Technician, ESA certifications, or equivalent are preferred
• Manufacturer certifications such as Axis Network Video, Milestone, Genetec, Exacq, Bosch, KeyScan, Avigilon, Lenel S2, March Networks, or Open Options are preferred
• Strong interest and motivation to pursue ongoing education and additional certifications
• Solid familiarity with the National Electrical Code (NEC)
• Ability to meet travel and on-call requirements for the position
• Excellent time management and organizational skills
• Strong problem-solving and decision-making capabilities
• Ability to multitask effectively in a fast-paced, multi-project environment
• Proficiency in Windows-based computer environments, including MS Office (Outlook, Excel, Word) and other standard software
• Excellent written and verbal communication skills

PERFORMANCE MEASUREMENTS

• Demonstrates a clear understanding of the key duties and responsibilities of the position
• Shows enthusiasm and effort to perform all aspects of the role effectively
• Exhibits competence and capability to execute key duties and responsibilities efficiently
• Consistently meets expected standards of quality and customer satisfaction
• Completes assigned tasks promptly and adheres to project deadlines
• Represents MTG in a professional manner at all times, embodying the company’s standards of conduct
• Demonstrates sound decision-making through practical analysis, effective problem-solving, and good judgment
• Maintains effective working relationships and collaborates well within a team environment
• Communicates clearly and professionally, both verbally and in writing, including emails, reports, and correspondence
• Demonstrates reliability through consistent attendance, punctuality, and timely completion of tasks
• Embodies MTG’s Core Values:
• People First: Demonstrates humility, helpfulness, and genuine care for others
• Above and Beyond: Exhibits a “whatever it takes” mindset, actively contributing beyond minimum expectations
• Sense of Urgency: Responds promptly and diligently to organizational and client needs
• Team Player: Demonstrates respect, support, and collaboration, sharing expertise generously
• Do the Right Thing: Operates with honesty, integrity, transparency, and strong ethical standards

COMPENSATION AND BENEFITS

Base Salary $85,000 - $110,000+ DOQ

Car Allowance

Phone Stipend

Medical, Dental & Vision Insurance

401k Match

PTO

Nice Healthcare

Life Insurance – Company-provided

STD / LTD – Company-provided

Employee Referral Bonus

Development Opportunities

Machine Builder – 3 Openings (2 Integration, 1 Sub‑Assembly)

Location: Clinton Township, MI

Schedule: Full-time, Onsite

Type: Long-Term Contract

Requirements: Must pass drug screen and background check

About the Role

We are seeking skilled Mechanical Machine Builders—2 Integration Builders and 1 Sub‑Assembly Builder—to join our team supporting automotive equipment build and installation projects. This role requires the ability to work independently with minimal supervision while delivering high‑quality workmanship.

Key Responsibilities

• Perform mechanical integration and sub‑assembly work for automotive OEM projects (Chrysler, Ford, GM).
• Work independently on medium-complexity mechanical build projects.
• Follow equipment installation through all phases, from in-house build to customer-site installation.
• Assist the project team in resolving technical issues or build concerns.
• Read and interpret blueprints, mechanical drawings, and BOMs.
• Update and submit weekly E‑BOM summaries to the Mechanical Supervisor.
• Verify all parts and assemblies conform to specifications and engineering documentation.
• Maintain project schedules, track open issues, and meet deadlines.
• Follow all safety, environmental, and quality system procedures.
• Maintain a clean, organized work area.
• Utilize rigging and crane equipment safely and effectively.
• Perform basic welding as required.
• Provide and maintain own tools and PPE.

Qualifications

• Education: One-year certificate from a college or technical school; or
• 5 years of related mechanical assembly experience; or
• Equivalent combination of education and experience.
• Strong understanding of automotive industry build practices.
• Proficient with standard mechanical tools, rigging, and overhead cranes.
• Ability to work with minimal supervision while maintaining high-quality output.
• Reliable, consistent, and punctual attendance is essential.

Additional Details

• This role requires 100% onsite work.
• Long-term contract opportunity with full-time hours.
• Candidates must successfully pass drug screening and background checks.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Tank Sealer to join our Joint and Installation team in Everett and Renton, Washington.

As an Integral Fuel Tank Sealer, you will be essential in maintaining the highest standards of quality and safety during the sealing and assembly processes. Utilizing detailed installation plans and specifications, you will prepare tank surfaces, load sealing equipment, and apply sealants and topcoats according to established guidelines. Conducting thorough inspections and shakedowns of work areas prior to tank closure will ensure that any damaged seals or components are repaired and that all systems are functioning correctly. You will also assist with pressure testing operations and perform functional tests on fuel vent systems to identify and address any leaks. Your attention to detail will be critical in determining the appropriate sealing compounds and methods for each task, ensuring compliance. Please note that this role involves working in tight spaces, including entering the wing through a 9.5"X17.7" opening; therefore, comfort with confined spaces is essential for success in this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Obtain daily work assignments from the lead or supervisor and review relevant Installation Plans (IP) and Shop Order Instants (SOI) to determine the work area.
• Gather necessary sealants, solvents, cleaners, and wipers from the designated storage area.
• Install ventilation equipment as required to ensure proper airflow in the work cavity.
• Clean tank surfaces using appropriate solvents or detergents, ensuring they are wiped dry.
• Clean and adjust sealing equipment to ensure proper functionality.
• Load sealing guns and apply sealant and/or topcoat per BAC specifications, including fillet seals to system components and sealing heads and collars of fasteners.
• Perform a shake-down of work areas prior to tank closure to repair any damaged seals or components and prepare for inspection.
• Apply wing station identification numbers on tank doors using stencils and spray paint as required.
• Install fuel tank closure panels or access doors after all necessary steps are complete and accepted by quality assurance.
• Assist with pressure testing operations and perform functional tests on fuel vent systems and tank cavities to determine if leaks exist.
• Submit completed jobs or in-process checks to inspectors for acceptance or rejection.
• Determine proper sealing compounds, sequence of work, and method of application to accomplish assignments.
• Apply aerodynamic seals to skin gaps on leading and trailing edge panels as required.
• Position tools for locating vortex generators and apply faying surface seals as needed.
• Maintain personal and tool certifications, ensuring compliance with operational standards, and contact supervisors for assistance when needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. § 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ years of experience with paints, coatings, finishes, and/or sealants.
• Experience in handling chemicals and/or hazardous materials.
• Experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.
• Experience working from heights & using fall protection equipment with weight limitations.
• Experience with safety process and/or procedures in a manufacturing or operations environment.
• Experience working with tools and following work instructions.
• Ability to access/enter a wing fuel tank opening (approximately 9.5 inch x 17.7 inch)

Preferred Qualifications:

• 1+ year of experience performing aerospace sealing.
• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.
• Respirator trained
• Completed 1+ year of aerospace training in high school or community and technology college

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• This position offers relocation based on candidate eligibility.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement

Applications for this position will be accepted until Aug. 28, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. 

As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.  

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities: 

• Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. 

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. 

• Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. 

• Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. 

• Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. 

• Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. 

• Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. 

• Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. 

• Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. 

• Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.

• Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. 

• Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. 

• Use precision measuring instruments to verify that quality standards are achieved. 

• Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. 

• Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. 

Physical Demands and Potential Hazards: 

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. 

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee 

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. 

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process.  Failure to complete the assessment will remove you from consideration. 

Basic Qualifications (Required Skills/Experience):  

• 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.

• 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting. 

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.

• Ability to lift up to 35lbs.

• Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications:  

• 1+ years of experience performing aircraft structural work or equivalate.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:  

High school graduate or GED preferred. 

Relocation: 

This position offers relocation based on candidate eligibility. 

Drug Free Workplace: 

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. 

Union Representation Statement:  

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. 

Shift:  

This position is for a variety of shifts.  

Total Rewards & Pay Transparency: 

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.    

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.    

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay is based upon candidate experience and qualifications, as well as market and business considerations.    

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 10, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

• 
  
• Participate in reviewing physical records from boxes, extracting metadata (e.g., document dates, names, titles, product info), and entering into database for indexing (at box or file level).
  
• Accurately track and report daily work progress.
  
• Demonstrate accuracy and proficiency in daily data entry output.
  
• Handle record boxes (using carts), with small physical component of lifting/moving 20-25 lb boxes.
  
• Strict adherence to safety guidelines in office/warehouse-like environment.
  
• Collaborate in team environment to achieve timelines.
  
• Responsible for compliance with applicable policies and procedures and safety guidelines.
  
• Perform other duties as assigned.
  

• 
  
• High School diploma or equivalent (required).
  
• College coursework, associate or bachelor's degree preferred.
  
• Demonstrated attention to detail, specifically with typing and organizational skills.
  
• Advanced knowledge and experience with MS Excel, Word and PowerPoint.
  
• Ability to lift containers of 25 pounds or more repetitively (carts available).
  
• Clerical experience (sorting, collating and filing).
  
• Demonstrated leadership skills such as: Time management, good communicator, quality focus, proactive, teamwork, etc.
  
• Strong organizational skills (preferred).
  
• (Note: Higher education may compensate for years of experience.)
  
• Working Conditions & Physical Demands (If Applicable):
  
• Lifting Requirements: 20-25 lbs average (boxes on pallets, carts available for transport to workstation). Some flexibility in movement; not continuous sitting. Busy environment with activity around moving record boxes; requires sustained focus.
  

Mother Baby Unit

East Tower, 2nd floor

This unit has 40 private rooms for both high risk and low risk postpartum patients, post-operative surgery and medical patients.  As part of MercyOne Children’s Hospital the unit also has a newborn nursery.  Nursing and medical providers work together as a team to deliver care for the newborn, mother as well as medical patients. 

POSITION PURPOSE 

Acts as a clinical/educational resource to patient care activities/teaching programs within the area of defined specialization. Supports patient/family/unit needs of diverse ages. 

ESSENTIAL FUNCTIONS 

Knows, understands, incorporates, and demonstrates the Trinity Health Mission, Vision, and Values in behaviors, practices, and decisions.  

Identifies educational needs, develops program(s) to meet those needs, and coordinates implementation of the program(s). 

Evaluates programs and modifies as indicated. 

Works independently with limited direct supervision using the Nurse Practice Act, MercyOne Medical Center policies, nursing standards, and professional judgment. 

Serves as a resource in area of specialty and collaborates with other disciplines. 

Provides consultation in specialty areas to all levels of health care providers throughout the hospital, affiliated schools of nursing, and the community. 

Actively participates on committees, task forces, and in work groups, as requested. 

Participates in research by reviewing literature, communicates findings, identifies potential research questions/projects and coordinates research projects in area of clinical specialty. 

Performs efficiently in emergency situations, following established standards. 

Presents selected program topics. 

Facilitates program presentation/equipment gathering. 

Utilizes delegation skills effectively. 

Coordinates the lactation champions and the “Mommy and Me” class. 

Other duties as needed and assigned by the manager. 

Maintains a working knowledge of applicable Federal, State, and local laws and regulations, Trinity Health’s Organizational Integrity Program, Standards of Conduct, as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical, and professional behavior. 

MINIMUM QUALIFICATIONS 

Possession of a current or compact state license as a registered nurse issued/defined by the State of Iowa. 

Certified Lactation Counselor (CLC) or International Board-Certified Lactation Consultant (IBCLC) required. 

Proof of completion of Mandatory Reporter abuse training specific to population served within three (3) months of hire. 

BLS for the Healthcare Provider certification within six (6) weeks of hire. 

Neonatal Resuscitation Program certification within six (6) weeks of hire. 

Demonstrates competency in breastfeeding techniques. 

Must be comfortable operating in a collaborative, shared leadership environment. 

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with the ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health. 

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Central Transport is one of the nation's most trusted and technologically advanced Less-Than-Truckload (LTL) carriers. With an ever-growing network of terminals nationwide, our team of dedicated professionals provide safe and efficient service to the United States, Canada, and Mexico.

Our Growth is Creating Great Opportunities!

Our team is expanding, and we want to hire the most talented people we can. Continued success depends on it! Once you've had a chance to explore our current open positions, apply to the ones you feel suit you best and keep track of both your progress in the selection process, and new postings that might interest you!

Thanks for your interest in working on our On-boarding and Integration Support Team!

Responsibilities

Onboarding and Integration Support- Primary responsibilities will be EDI/pickup matching and follow up support for OBI customers. EDI/Pickup matching- this will include review of default matching, identifying needs for enhanced matching and determining why/where default matching is breaking. The broad view will be to find common fixes with large application across our systems for wholesale solutions. Follow up support will include the continued monitoring, problem solving and communication on items that arise from customers going through the OBI process. Currently there is a high-level spot check being done due to time constraints/workloads that has been identified as an area where additional support is needed to be a best-in-class carrier.

Benefits:

• Health, Dental, Vision, and Life Insurance
• Paid time off
• 401(k)
• ROOM FOR GROWTH!!

STRATEGIC STAFFING SOLUTIONS HAS AN OPENING!

This is a Contract Opportunity with our company that MUST be worked on a W2 Only. No C2C eligibility for this position. Visa Sponsorship is Available! The details are below.

“Beware of scams. S3 never asks for money during its onboarding process.”

Job title: Senior Creative Designer — Events, Print, Digital, and Integrated Campaigns

Location: Charlotte, NC

Work Schedule: Hybrid – 3 onsite / 2 remote

Contract Length: 6+ months

Pay: 42 an hr on W2

The Creative Designer will partner closely with an Art Director, designer, as well as an external agency to shape concepts, lead design execution, and ensure production excellence across print, digital, environmental, and event touchpoints.

This role requires strong creative thinking—balancing bold ideas with disciplined craft—and ownership of design quality from early concept through final production.

The designer will collaborate with marketing, project management, and production partners to deliver on business goals.

Key Responsibilities

• Concept & Pitch:
• Develop campaign and event concepts based on strategy and given creative vision, explore multiple creative directions, and contribute to stakeholder presentations with clear rationale and recommendations
• Design Execution:
• Produce polished, channel-ready creative across events, print, digital, and integrated campaigns while maintaining a clean, high-impact aesthetic
• Systems Thinking:
• Translate creative direction into scalable design systems including layouts, typography, grids, and component libraries to support expansion across touchpoints
• Collaboration:
• Work within cross-functional teams and engage early with partners (video/motion, web/development, CX) to ensure concepts are feasible and production-ready
• Iteration:
• Respond to feedback constructively, refine work through multiple rounds, and maintain high design standards from initial concept to final delivery

Required Qualifications

• Portfolio demonstrating conceptual thinking and high-quality execution across environmental design, print, digital, and campaigns
• Strong understanding of typography, composition, layout systems, and visual hierarchy
• Experience designing for event marketing ecosystems (signage, decks, email-adjacent assets, on-site collateral, templates)
• Ability to communicate design rationale and connect creative decisions to strategy and objectives
• Strong collaboration skills with the ability to manage multiple priorities in a fast-paced environment

Nice to Have

• Motion design capabilities (kinetic typography, transitions, social/motion assets) or experience collaborating with motion/video teams
• Familiarity with environmental production (print specs, vendor coordination, fabrication considerations)
• Experience working with web/development/CX teams to ensure design feasibility and execution