Cloud Buddy Pipe Jobs in Usa

• 
  
• Assembly and disassembly of pumps in shop.
  
• Completion of comprehensive inspections of pumps and components.
  
• Identification of the cause(s) of mechanical/electrical pump failures & recommend corrective action.
  
• Daily maintenance of department equipment and tools.
  
• Record and monitor each order's labor and material.
  
• Ensure and control safety and quality assurance at all times.
  
• Inventory functions, to include stocking, pulling parts, and conducting inventory audits under direction.
  
• May be required to assist service mechanics in field repair.
  
• Be environmentally conscious of work environment.
  
• Adhere to inventory control and other company procedures as applicable.
  
• Professional conduct always.
  
• Duties and responsibilities may be added, deleted, or changed at any time at the discretion of management, formally or informally, either verbally or in writing.
  
• Act reasonably to avoid hurting themselves and others.
  
• Perform the job in a way that meets all applicable laws, regulations and EHS requirements.
  
• Report immediately all hazards / incidents to their direct Manager/Supervisor, or Site EHS Representative (or designee) after realizing a work-related event has occurred.
  
• Exercise their freedom and ability to identify areas for improvement and to initiate, recommend, or provide solutions to EHS related issues.
  
• Complete all required EHS training courses.
  
• Comply with the GCB Environmental, Health, and Safety Management System requirements.
  

• 
  
• 3 yrs experience fitting piping, running instrument tubing & installing components & vessels on skid-mounted equipment.
  
• Read & understand P&ID, general arrangement and isometric drawings
  
• Prior experience fabricating & installing piping and support structures.
  
• Measure, cut, thread, groove, bend, assemble and install various metal & plastic pipes, valves & fittings.
  
• High School diploma or General Education Degree (GED) preferred.
  

• 
  
• Knowledgeable in joining, fabricating, and repairing metal and other weldable material by applying appropriate welding techniques.
  
• Perform various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems.
  
• Fabricate and install fixtures and jigs required for welding process alignments.
  
• Interprets blueprints, specifications, diagrams or schematics to determine appropriate welding process.
  
• Must be able to select required welding filler materials, joint design, heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD.
  
• Inspects completed welds to determine structural soundness and adherence to NAVSEA, ABS & AWS standards. Installs or repairs equipment, such as pipes, valves, floors and tank linings.
  
• Leads technical project teams, schedules, reports and briefs customers and senior management.
  
• Performs duties outside of specialty in order to complete installation or work assignment.
  
• Experience in SMAW, GMAW & GTAW, Ship Fitting and OXY ACC & Propane GAS Cutting torch.
  
• Able to weld multiple types, thicknesses & sizes of pipe, plate & bar material in horizontal, overhead and/or vertical positions.
  

• 
  
• Must possess a high school, trade or vocational school degree
  
• 5-10 years of direct experience in ship repair and installation of HM&E systems and equipment
  
• Ability to read and interpret ship installation drawings, installation specifications and NAVSEA Standard Items is preferred
  
• Must have or have the ability to obtain a SECRET clearance
  
• Must have the ability to obtain base access and security credentials
  
• Ability to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs
  
• Ability to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces
  
• Travel may be required within and outside of the continental United States
  
• Due to export control regulations, this role is open to U.S. citizens of the US
  
• Demonstrated reliability and punctuality; must be able to consistently report to work on time
  
• Possess basic and some advanced specialized welder's tools
  

• Regular attendance at assigned location; may include the A/Z fabrication facility or other project sites;
• Works on systems that include Heating Hot Water, Chilled Water, Steam, Condensate, Compressed Air, Process Fluids, Chemical, Fuel Oil, Gasses, and other related systems;
• Works with materials that include carbon steel, stainless steel, plastics, fiberglass, copper, (brazed, soft soldered and pro-press);
• Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
• Remove rough spots from work pieces, using portable grinders, hand files, or scrapers.
• Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment.
• Weld pipe and components in flat, vertical, or overhead positions using open root butt weld, socket weld and/or fillet weld.
• Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.
• Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
• Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
• Examine work pieces for defects and measures work pieces with straightedges or templates to ensure conformance with specifications.
• Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreignmatter.
• Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
• Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
• Fill holes, and increase the size of metal parts.
• Detect faulty operation of equipment or defective materials and notify supervisors.
• Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
• Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
• Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
• Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools.
• Clean or degrease parts, using wire brushes, portable grinders, or chemical baths.
• Mark or tag material with proper job number, piece marks, and other identifying marks as required.
• Position and secure work pieces, using hoists, cranes, wire, and banding machines or hand tools.
• Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations.
• Dismantle metal assemblies or cut scrap metal, using thermal-cutting equipment such as flame-cutting torches or plasma-arc equipment.
• Preheat work pieces prior to welding or bending, using torches or heating furnaces.
• Hammer out bulges or bends in metal work pieces.
• Develop templates and models for welding projects, using mathematical calculations based on blueprint information.
• Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments.
• Cut, contour, and bevel metal plates and structural shapes to dimensions as specified by blueprints, layouts, work orders, and templates, using powered saws, hand shears, or chipping knives.
• Estimate consumable materials needed for production and manufacturing and maintain required stocks of materials.
• Set up and use ladders and scaffolding as necessary to complete work.
• Use fire suppression methods in industrial emergencies.
• Detect faulty operation of equipment or defective materials and notify supervisors;
• Direct helpers or apprentices in appropriate tasks;
• Must maintain strict adherence to safety rules and quality;
• Participate in site housekeeping;
• Interact with co-workers in an attentive courteous manner;
• Additional duties as directed by management.
  

• Ability to work independently or as part of a team;
• Experience: 5 years of Field Experience, trade school or apprenticeship;
• Knowledge of materials, methods and tools involved in industrial construction;
• Attention to detail;
• Ability to keep hand and arm steady;
• Be highly focused on customer satisfaction expectations;
• Good documentation and record keeping;
• Preparation of miscellaneous paperwork including time sheets, daily reports and material requests;
• Competency in Permit Required Confined Space;
• Understanding of and strict adherence to daily Job Hazard Analysis (JHA);
• Appropriate state certification or license;
• OSHA 10 certification.
  

• Industrial manufacturing facilities Power generating facilities
• Chemical manufacturing Healthcare & Institutional
• Pharmaceutical facilities including GMP - Aseptic and non-Aseptic Areas and Non GMP Areas Commercial and offices spaces
  

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, The American Red Cross, Ronald McDonald House and many more.

We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities.

Come join our award winning over 12,000 strong organization as we fuel the world and each other!

This position will apply corrosion knowledge and skills to repair, install, troubleshoot, analyze, and perform other predictive and preventative maintenance tasks on assigned equipment, facilities, systems and associated devices contained within gas and liquid facilities and pipelines.

To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below:

• Under general direction, provide for design, installation, operation, inspection and maintenance of the cathodic protection systems within an assigned segment of the pipeline system, compressor stations or plant facilities in a reliable and efficient manner while in compliance with the Partnership's procedures and regulatory requirements
• Maintain working knowledge of regulatory requirements, perform associated required tasks, and complete required documentation (OSHA, DOT, EPA, etc.)
• Investigate and analyzes corrosive conditions for existing and/or proposed facilities
• Responsible for corrosion control and associated compliance of cathodically protected pipelines, compressor stations or plant facilities, and other buried, submerged, or above ground facilities
• Proactively conduct pipe-to-soil potential surveys, casing-to-soil readings, rectifier and bond readings, current flows on pipeline, and foreign pipe-to-soil readings and all other structures under cathodic protection on a frequency as stated in SOPs or meet regulatory requirements and document in the corrosion database or other forms, records or reports
• Evaluate protective coating condition including internal, external and atmospheric systems and make repairs as needed, evaluate pipe anomalies and perform remaining strength calculations in accordance with established procedures
• Have an understanding of pipeline internal corrosion mechanisms and related mitigation measures including treatment and testing, collection of samples, bacteria, pH, dissolved H2S, and C02 testing and analysis, and perform chemical requirement calculations
• Perform cathodic protection design including current requirement calculations and soil resistivity testing
• Generate and maintain the reports covering rectifiers, bonds, pipeline isolation and annual corrosion control reports
• Install, maintain and repair rectifiers, anodes systems, cables, bonds, test stations and perform ground bed efficiency calculations
• Evaluate the effects of stray currents from other sources (i.e., traction systems, coal mines, AC transmission lines, etc.) and take the necessary action(s) to mitigate their effect on Energy Transfer facilities
• Read and interpret pipeline maps, as-builts and PLD's
• Must use and operate all pertinent safety equipment when performing duties in potentially hazardous areas (arc flash protective PPE, respirator, hard hat, safety glasses, etc.)
• Must display workmanship consistent with Partnership SOPs industry standards, partnership work practices, applicable codes and/or engineering drawings and sketches
• Insure facilities, grounds, and work areas are maintained in a safe, orderly, and functional manner
• Communicate with other technicians for assistance in effecting repairs when applicable
• Ability to train others in discipline job tasks and to confirm knowledge, skills and abilities of others as an evaluator for partnership skill qualification program dependent upon position level
• Actively participate in PHMSA or State regulatory audits
• Actively participate in partnership safety program and initiatives
• Inspect crew welds on full wrap and pumpkins for acetylene welds and surface pitting that is discovered during corrosion activities such as pipeline recoats and exposure repair
• Comply with partnership safety policies and procedures
• Perform energy isolation lockout/tagout procedures (LOTO)

High school diploma or GED

Required experience is commensurate with the selected job level:

• Level C requires a minimum of 0 2 years of relevant industry experience or equivalent work experience
• Level B requires a minimum of 2 4 years of relevant industry experience or equivalent work experience
• Level A requires a minimum of 4+ years of relevant industry experience or equivalent work experience

• Must maintain valid driver's license in state of residency
• Proficiency with MS Office Suite products
• Ability to train other technicians and/or sign off on qualifications

• Associate of Applied Science Corrosion Technology
• NACE Corrosion Technician or Corrosion Technologist Certification
• NACE CP level II
• Welding school qualifications for inspection of welds

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.

• Frequent exposure to heat, cold, and other adverse weather conditions
• Working conditions may include confined spaces
• Repetitively standing, walking, bending, stretching, reaching over shoulder height, and climbing ladders up to 25 feet. Occasionally lifting up to 50 lbs with or without assistance
• Subject to call-outs to respond to operational issues and emergencies after working hours, at night, and on weekends and holidays
• Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and may require appropriate personal protective equipment
• Reliable attendance at work
• Occasional overnight travel may be required

We are committed to building a diverse and inclusive workplace that embraces the unique perspectives of our employees, our customers, patients, community stakeholders, and cultures across the world. We believe that a variety of backgrounds makes our team stronger and more innovative.

At Air Liquide, we RESPECT, HONOR and VALUE diversity.

Air Liquide is Hiring for a Senior Design Engineer in Phoenix, AZ!

We are looking for you!

• Pay: $135,000.00 - $145,000.00
• Comprehensive Family Benefits: Air Liquide offers a full benefits package designed to support your whole life, including Medical, Dental, Vision, Life, AD&D, and Disability Insurance.
• Support for Parents: We offer a 14-week paid child birth benefit to support growing families.
• Future Security: 401(k) Retirement Plan with company match
• Additional Benefits: Tuition Assistance, Paid Holidays, Vacation, and Sick time.
• Early Access: Your benefits start Day 1!

Recruiter: Carolyn Harris |

The Senior Design Engineer is a team member of the EG Design group and is responsible for the process design of industrial gas, specialty gas and chemical systems for Air Liquide customers in the Electronics industry. This position is responsible for design development and project technical support starting at the conceptual phase through project execution and has mastered the skills needed to apply RAGAGEP (Recognized and Generally Accepted Good Engineering Practices), national codes and internal IMS standards to the project design. This position is recognized as a Subject Matter Expert in one or more fields of expertise and contributes at a local or international entity level.

Responsibilities

• Develop process design which complies with recognized codes, internal and external standards and good engineering practices
• Develop scope of work for disciplines outside ALEUS area of expertise
• Coordinate design deliverables from 3rd party engineering firms
• Evaluate client's proposal request to identify project objectives and technical requirements; prepare design basis and design milestone schedule
• Assist estimating and implementation staff by soliciting bids, performing technical bid analysis, developing bill of materials, and specifying components
• Assist proposal development by addressing technical descriptions, scope definition and technical clarifications
• Design and specify major equipment and associated utility systems
• Perform equipment, piping, valves and component sizing and specification; prepare equipment data sheets
• Direct drafting personnel for development of Process Flow Diagrams, plan drawings, routing and detail drawings and P&IDs
• Lead design review meetings for process systems; track and close design review action items
• Coordinate and participate in design reviews with 3rd party engineering firms
• Actively participate in reviews for safety, operability and reliability
• Assist project management during project execution: resolve discrepancies, changes or omissions in design and design documents
• Track design modifications; issue Design Change Notice
• Direct and review design documentation modifications; review field staff provided P&ID and plan drawing markups to reflect as-built status
• Create and maintain project records including design calculations, drawings, equipment and component specifications, lessons learned, design review minutes, bid packages and administrative files
• Develop startup, operation and maintenance procedures; review and ensure that operational concerns are addressed prior to commissioning so that the process / system can be operated safely and efficiently
• Define required equipment inspections and verification methods
• Evaluate value-engineering options to provide the lowest cost solution while maintaining project requirements; develop documents to compare and present value-engineered options to client and project staff; incorporate the pertinent changes in the project design
• Develop design standards and specifications for recurring tasks to ensure reliability, consistency and improved design process efficiency
• Contributes technically and shares knowledge at a local or international entity level
• Perform functions of Design Authority in multiple fields of expertise; validate process designs; assist existing facilities with the Management of Change process

_____________________

Required Qualifications

• BS Degree Chemical or Mechanical Engineering
• 10+ years work experience in engineering process design, operations or project engineering in industrial gas, chemical or related industry
• Strong technical knowledge of fluid flow; ability to perform complex calculations
• Strong technical knowledge of carrier gas system function and ASU process
• Strong knowledge of common industrial gas system piping and components
• In-depth knowledge of industry codes such as NFPA, ASME standards, and internal IMS standards
• Strong understanding and interpretation of project specific specifications, codes and standards
• Ability to prepare, read, interpret and scale P&IDs, mechanical, electrical, civil and structural drawings
• Consistent application of RAGAGEP
• Strong problem solving skills
• Strong verbal and written communication skills
• Ability to organize and prioritize workload for multiple project assignments; set design milestone dates
• Ability to plan work, both short and long term to ensure project deadlines are met
• Proficient in utilization of MS Office products and/or Google Suite tools
• Proficient in use of pipe flow and stress modeling programs (AFT Arrow and Fathom, CAEPIPE, Crane Flow of Fluids, CAESAR)
• Familiarity with Autodesk AutoCAD software
• Ability to evaluate options and recommend best solutions
• Ability to delegate project specific tasks to junior team members
• Ability to research and apply new technologies

Preferred Qualifications

• PE license

Candidates must have valid employment authorization in the U.S. and must not require visa sponsorship now or in the future. This position is not open for non-immigrant visa sponsorship.

Manager, Quality Plant Operations

Summary

The Quality Plant Operations Manager is responsible for all quality activities related to in-house fabrication of pipe spools and vessels in alignment with the Quality Management System. This individual will also be responsible for the quality of painting, assembly, and Shipping of the final product to the Customer. This individual will be accountable for ensuring compliance with quality standards and providing complete, accurate, and timely project deliverables.

Principal Responsibilities and Duties

• Responsible for the supervision, direction, and career development of in-house Plant Operations quality personnel.
• Influence the development and implementation of standards, policies, procedures, and internal systems that support Quality and Product Excellence.
• Oversee Plant quality documentation and document control processes.
• Develop clear quality objectives within Fabrication and Assembly and related processes.
• Coach and train quality and production team members.
• Define and maintain inspection standards for piping and vessel components that comply with code requirements, support successful assembly operations, and ensure longevity of components in operation.
• Oversee testing and managing Welder/Welding Operator Performance Qualification (WPQ).
• Responsible for selection and management of 3rd party testing services.
• Initiate & follow-up on corrective/preventive actions and the implementation of continual improvement efforts related to Pipe and Vessel Fabrication and Assembly.
• Development, qualification, and management of Welding Procedure Qualifications (WPQR) and Welding Procedure Specifications (WPS) to specify the use of proper WPS in production applications.
• Develop and analyze statistical data to improve department performance.
• Direct team members to ensure control over the quality of materials and fabricated components.
• Support the Quality Assurance and Compliance Manager with Customer and 3rd Party audits/inspections related to in-house Fabrication and Assembly quality and compliance, as well as external audits and licensing coordination.
• Review customer/client specifications, as needed, against Company and Industry codes and standards in support of applications engineering and sales to assure proper costing and compliance, and/or recommend exceptions to specifications.
• Participate in Internal, Customer, and Fabrication kickoff meetings to assure definition of project scope and responsibilities affecting the quality of fabricated components and the adherence to project specifications.
• Influence the development of new departments and welding processes and procedures and coordinate with production on the selection of the most efficient processes and parameters.
• Management of numerous industry and Customer/Client/End User specifications and requirements.

Qualifications

• BS/BA degree desired.
• Minimum of 15 years related QA/QC experience in a manufacturing environment, including a minimum of 5 years of management experience.
• Familiarity with Codes and Specifications, including AWS, API, SSPC, NACE, ASME, ANSI, and PED.
• Strong Customer relations/external conflict resolution skills, including the investigation and rectification of customer-reported issues and complaints.
• Experience with/participation in production control and planning processes.
• Lean Manufacturing experience a major plus.
• AWS CWI strongly desired.
• ASME Section VIII, IX, and B31.3 knowledge is a must

Why work with us?

At Impact Fire, we are a group of hardworking, dedicated fire protection professionals committed to protecting lives and property from fire. Our cohesive team spirit and customer service-oriented culture are expressed in all that we do. We operate with the belief that every team member plays a critical role in our success. We operate in 30+ district office locations across the United States, supporting industries ranging from retail and healthcare to education and restaurants.

Benefits of joining Impact Fire Services

When you join Impact Fire you will receive:

• Competitive compensation
• Pay is on a weekly cycle, every Friday
• Career Advancement Opportunities
• Competitive benefits, including healthcare, dental, vision, life insurance, paid time off and holidays
• Company paid short and long-term disability
• Immediately vested in our 401(k) company match
• Full-time employees participate in our Shared Ownership Program which offers a monetary bonus aligned to the company's long-term success. This program fosters an ownership mindset and ensures that every employee meaningfully shares in the success they help create.
• Exceptional guidance and support from our managers
• Collaborative culture & environment
• Robust training opportunities with company reimbursement upon achieving required licensing
• Apprenticeship programs for fire sprinkler, fire alarm and inspection positions
• Opportunity to work alongside some of the best talent in the fire protection industry

Responsible for inspection, installation, and repair of Wet, Dry, Pre-action, Deluge and Foam systems; Testing, rebuilding and/or replacing Backflow Preventers. Responsible for identifying trouble areas and performing service in an efficient and professional manner to ensure that sprinkler systems are operating properly. We seek a self-motivated, customer service-oriented lead technician. The ideal candidate will be organized, professional, and a good communicator. This important position will establish a rapport and build positive relationships with our customers.

$10,000 sign-on bonus based on experience!!

Responsibilities include:

Sprinkler and Backflow Systems Installation, Repair, & Service:

• Prepare jobsite, performing visual inspection of system, disabling horn & strobes, and alerting alarm company and fire department.
• Install/hang sprinkler systems and their components per NFPA and engineering guidelines.
• Install or replace wet, dry, pre-action, deluge and foam systems as needed.
• Repair and/or replace all sprinkler systems components.

Repair, replace and rebuild backflow preventers as necessary.

• Verify proper communication with monitoring station when working on a monitored system after repair.
• Perform system tests to verify alarm & sprinkler systems are working properly upon completion of repair.
• Complete installation paperwork in a timely manner and turn completed paperwork into branch management.
• Report Deficiencies to Department Manager.

Qualifications

• Massachusetts Fire Sprinkler Journeyman License
• 1-3 years field experience in Sprinkler and Backflow systems service.
• Fire and /or Life Safety Systems experience.
• Must have or be able & willing to attain state Sprinkler and/or Backflow Licenses.
• Possess a valid driver’s license and driving record that meets company requirements.
• Must have a strong mechanical aptitude.
• Must be able to visually inspect and service sprinkler and backflow systems.
• Must be able to recognize alarm sights and sounds.
• Strong working knowledge of NFPA codes.
• May require ability to effectively use a Sprinkler Pipe Threader.
• Must be able to effectively use backflow tester, pipe wrench, various lifts and common pipe fitting tools.

Preferred Qualifications

• 3-5 years of proven success in performance of Sprinkler inspection, installation, and service is highly preferred.
• NICET Certification in Inspection & Testing of Water-Based Systems and/or Water-Based Systems Layout, preferred.

Successful completion of a drug test and pre-employment background screening is required. MVR checks are required for all driving positions.

We look forward to talking with you about career opportunities with Impact Fire Services.

Employment with an Equal Opportunity Employer (EOE) including disability/veterans.

Senior Estimator

Murphy Company, the Best Choice in Mechanical construction since 1907, is hiring an Estimator for our Estimating team, located in our Thornton, CO, office.

About Murphy Company

Since 1907, Murphy Company has been a leading mechanical contractor in St. Louis and Denver markets that provides its professionals the environment, opportunities, technology, and tools to experience a rewarding career. Being a company that prides itself on its core values of employee well-being, enduring relationships, integrity and professionalism, we know it starts with our employees. We strongly believe our people are our most important asset, and we strive every day to make Murphy a great place to work as we build our clients’ visions.

As a Senior Estimator, you will be a vital member of Murphy’s preconstruction team, the get work gurus. You will help build our company’s portfolio by utilizing your attention to detail and time management skills to produce timely, accurate, and thorough estimates for projects throughout Colorado and Wyoming. We are looking for you to be a part of our get work initiative by estimating plumbing, sheet metal, mechanical, hydronic, and process piping systems.

We Are Looking For Someone Like You

• 10 plus years Estimator experience in Plumbing, HVAC and Process Piping of Institutional, Laboratory, Pharmaceutical, Brewery, Healthcare, and Industrial related projects.
• Responsible for leading all estimates up to $20M, compiling accurate bid documents – including take-off and summary of all materials, fixtures, and equipment, along with evaluation of labor, material, and equipment costs. Experience managing multiple, simultaneous projects.
• The individual should possess Process Piping expertise relating to plan layouts, schematics, P & IDs, and specifications. Plumbing, HVAC and Sheet metal knowledge a plus.
• This individual will solicit and evaluate, with assistance from the Purchasing Department, multiple subcontractor and equipment quotes, understand construction field conditions, and prepare schedules encompassing this information.
• Skilled in reading and understanding drawings, specifications, and bid documents.
• Ability to accurately compile a summary of materials, equipment, and labor.
• Understand construction field conditions, means and methods, and project schedules.
• Quickpen / Autobid software experience preferred.
• Microsoft Office, Outlook, Teams, and Bluebeam experience preferred.
• Excellent verbal and written communication skills.
• You will be responsible for soliciting, evaluating, and preparing bid proposals in the most attractive manner to general contractors and owners.

What We Will Bring to the Table

• A collaborative, family-friendly work environment
• Knowledge and expertise that has helped us grow and thrive for nearly 120 years.
• Competitive pay and an excellent benefits package, including health and life insurance, a robust wellness program, 401(k), and profit sharing.
• A robust PTO program designed to support real work–life balance

Senior Mechanical Project Manager

Location: Columbus, Ohio

Department: Operations

Reports To: Director / VP of Operations

Compensation: $105,000 – $135,000 (DOE)

Why Join Us?

Our client is a well-established mechanical contractor with more than 40 years of delivering HVAC, plumbing, and piping solutions across commercial, healthcare, education, government, and industrial sectors. Known for technical excellence and long-term client relationships, the company offers a collaborative environment focused on leadership development, operational excellence, and sustainable growth.

Role Overview

The Senior Mechanical Project Manager leads large-scale commercial and industrial mechanical construction projects in the Columbus, OH market. This role oversees project execution, financial performance, scheduling, and team leadership while ensuring projects meet safety, quality, and client satisfaction standards.

Key Responsibilities

• Manage HVAC, plumbing, and piping construction projects from kickoff through closeout
• Develop project scope, schedules, budgets, and execution plans
• Monitor financial performance including cost control, forecasting, and labor productivity
• Lead project teams and coordinate with field supervisors, subcontractors, and stakeholders
• Maintain strong client relationships through regular communication and site visits
• Prepare financial reports and participate in operational review meetings
• Ensure safety compliance and quality standards across all project phases
• Manage invoicing, collections, project documentation, and warranty issues

Success Metrics

• Projects delivered on time and within budget
• High client satisfaction and repeat business
• Strong labor productivity and cost performance

Qualifications

• 3+ years as a Mechanical Project Manager or Senior PM
• Experience managing commercial HVAC, plumbing, or piping projects
• Strong financial management, scheduling, and forecasting skills
• Knowledge of construction regulations and compliance requirements
• Proficiency with Microsoft Office and construction management software
• Strong leadership, communication, and team mentorship abilities

Benefits

401(k) with company match • Health, Dental, Vision • Life Insurance • HSA • PTO • Company vehicle & fuel card • Continuing education • Profit sharing

Apply Now

Join a respected mechanical contractor delivering complex projects and building long-term careers in the growing Columbus construction market.

Candidates must be legally authorized to work in the United States without current or future sponsorship. Employment eligibility will be verified at the time of hire.

Company: Javelin Operations

Location: Central U.S. (Hybrid / Travel as Required)

Industry: Mission-Critical Mechanical Services / Industrial Mechanical Systems

The Project Manager / Estimator at Javelin Operations is responsible for both pre-construction estimating and full lifecycle project management for specialty mechanical services including mechanical flushing, chemical cleaning, passivation, and process system support for mission-critical and industrial facilities.

This role combines technical estimating, client coordination, and operational leadership to ensure projects are competitively bid, properly planned, and successfully executed in the field.

The Project Manager / Estimator works closely with field superintendents, clients, general contractors, and commissioning teams to deliver projects safely, on schedule, and within budget.

• Review project drawings, specifications, and scopes of work to develop accurate cost estimates and proposals.
• Prepare detailed estimates for labor, equipment, materials, and subcontractors.
• Develop technical scopes and execution strategies for flushing, passivation, and system cleaning activities.
• Coordinate with vendors to obtain pricing for:
• Pumps and filtration systems
• Temporary piping and hoses
• Chemical treatment and passivation materials
• Equipment rentals and logistics
• Prepare client proposals, budgets, and bid submissions.
• Participate in pre-bid meetings and technical scope reviews with clients and general contractors.

• Manage projects from contract award through final completion.
• Develop and maintain project schedules, budgets, and execution plans.
• Coordinate mobilization planning including equipment, materials, and field staffing.
• Work closely with field superintendents and foremen to ensure efficient project execution.
• Track project costs, productivity, and financial performance.

• Serve as a primary point of contact between Javelin Operations and project stakeholders.
• Coordinate project activities with:
• General contractors
• Mechanical contractors
• Commissioning teams
• Water treatment vendors
• Equipment suppliers
• Participate in project meetings and provide progress updates and schedule coordination.

• Ensure field execution meets project specifications and industry standards.
• Support development of flushing plans, temporary piping diagrams, and system cleaning procedures.
• Monitor testing, documentation, and quality control requirements.
• Ensure proper documentation for system turnover and project closeout.

• Track project budgets and ensure projects meet target margin goals.
• Manage change orders and scope adjustments.
• Review invoices, vendor costs, and project financial reports.
• Support company leadership with project forecasting and reporting.

• Work closely with field leadership and operations management to ensure project success.
• Support planning of manpower and equipment resources across multiple projects.
• Promote a culture of safety, accountability, and operational excellence.

• 5+ years experience in industrial mechanical construction or specialty mechanical services
• Experience in estimating and project management
• Ability to interpret construction drawings, P&IDs, and mechanical specifications
• Strong organizational and project coordination skills
• Proficiency with Excel and construction estimating tools
• Excellent communication and client coordination skills

• Data center construction or commissioning environments
• Mechanical flushing and passivation operations
• Process piping systems (carbon steel or stainless)
• Chemical cleaning or water treatment systems
• Temporary pumping and filtration systems
• Mission-critical mechanical infrastructure

• Estimating and cost analysis
• Project planning and scheduling
• Mechanical systems knowledge
• Client relationship management
• Contract and scope management
• Financial accountability
• Problem solving in field environments

This role requires a combination of office-based estimating work and travel to project sites across the United States. Work environments include active construction sites, industrial facilities, and mission-critical data center projects.

Javelin Operations is a specialized mechanical services company supporting mission-critical infrastructure and industrial facilities. Our services include mechanical flushing, chemical cleaning, passivation, and process system support for high-performance mechanical systems.

Our team works with leading contractors, owners, and commissioning teams to ensure critical systems are clean, operational, and ready for service.