Clean Remote Instructions Jobs in Usa
1,758 positions found — Page 10
H
Honda Express Technician
✦ New
Salary not disclosed
Stevenson-Hendrick Honda Wilmington Location: 6720 Market Street, Wilmington, North Carolina 28405 Are you looking for a great company to build your Automotive Technician career? Join a dynamic automotive group renowned for its commitment to excellence, innovation, and customer satisfaction.
Stevenson-Hendrick Honda Wilmington is dedicated to providing top-tier vehicle service and fostering a positive, growth-oriented environment for all employees.
If you have a passion for turning wrenches with enthusiasm to learn, apply today! Summary: The Lube Technician is responsible for performing express lube duties on vehicles.
Pay Range:$18.50 per hour and above (based on factors such as technician level and job performance).
Supervisory Responsibilities: This job has no direct supervisory responsibilities.
Essential Duties and Responsibilitiesinclude the following: Adheres to express lube guidelines.
Performs lube, oil and filter changes by draining and replacing oil and filter, and lubricating all joints, including idler arm steering knuckles, tie rods ends and ball joints.
Reports all necessary repairs to service advisor.
Installs completed LOF reminder sticker in vehicle.
Checks battery, tire air pressure, windshield fluid, transmission fluid and power steering fluid levels and refills as needed.
Checks coolant level and refills as necessary.
Ensures that vehicle is clean and free of fluid residue or fingerprints.
Checks fluid level prior to release of vehicle to ensure proper levels.
Maintains CSI at or above Company standards Maintains an organized, clean and safe work area Participates in required training Records all hours worked accurately in company timekeeping system Follows Safeguards rules and regulations.
Demonstrates the Company’s Core Values Complies with Company policies and procedures Observes all Federal, State, Local and Company safety rules and regulations in the performance of duties.
Other duties as assigned Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with medical conditions to perform the essential functions.
Desired Education: o GED √ High School Diploma o Associate Degree o Bachelor Degree o Master Degree o Doctorate Degree Field of Study/Work Experience: o Accounting √ Automotive o Business o Human Resources o Information Technology Desired Work Experience: √ up to 3 years o 3-5 years o 5+ years Education/Experience: Basic knowledge of automotive parts and systems.
Demonstrable mechanical skills and knowledge.
Technical training or commensurate technical experience.
Certificates and Licenses: √ Valid Driver’s License o Automobile Salesperson License Computer Skills: Basic Computer skills to utilize timekeeping system.
Communication Skills: Ability to understand and follow instructions.
Ability to communicate effectively with customers and company personnel.
Attendance Expectations: The position requires regular and predictable attendance.
Scheduled shifts may include evening hours, weekends, and holidays.
Physical Demands: Must be able to lift up to (50) pounds.
While performing the duties of this job, the employee is regularly required to talk and hear; stand; walk; use hands to finger, handle, or feel; reach with hands and arms and stoop, kneel, crouch, or crawl.
Environment Demands: Duties are performed primarily in the service area.
Work includes movement around vehicles, working in various physical positions, and the safe operation of power tools and test equipment.
May be exposed to loud noise, vibration, exhaust fumes, and other service and repair conditions.
Frequently interacts with service advisors and the service manager.
Verbal and Writing Ability: Ability to read and comprehend instructions, correspondence, and memos.
Ability to effectively present information in one-on-one and small group situations to customers and other employees.
Math Ability: Ability to add, subtract, multiply and divide.
Reasoning Ability: Ability to apply common sense understanding to carry out instructions.
Ability to deal with standardized situations.
Ability to understand and follow technical manuals.
Core Values: To perform the job successfully, an individual should demonstrate the following Core Values: Servant Leadership Servant Leaders consciously put the needs of others before their own, because to serve people is to value them.
Teamwork through Trust & Respect Diversity is strength, and when we trust and respect one another we can work as a team to achieve at a high level.
Integrity Being honest and transparent with people, in an effort to do the right thing within the letter and spirit of the law, drives every action we take and every decision we make.
Commitment to Customer Enthusiasm Every day we recommit ourselves to the customer experience, and we are empowered to exceed the expectations of our customers.
Passion for Winning Hendrick’s tradition of winning is based on the idea of striving to be the best, not the biggest, and is therefore defined by how we treat our people.
Accountability at All Levels Taking ownership of our actions and our decisions allows us to grow as individuals, and support each other as a team.
Commitment to Continuous Improvement Every day we soften our hearts as well as our egos, in order to seek out and improve upon areas of opportunity within ourselves and our team.
This job description in no way states or implies that these are the only duties and responsibilities to be performed by this employee.
The employee will be required to follow any other instructions and to perform any other duties and responsibilities upon the request of a supervisor.
This job description is subject to revision at the discretion of the company.
Hendrick is an Equal Opportunity employer.
Minorities, women, veterans, and individuals with disabilities are encouraged to apply.
For more information regarding the EEOC, please visit .
Stevenson-Hendrick Honda Wilmington is dedicated to providing top-tier vehicle service and fostering a positive, growth-oriented environment for all employees.
If you have a passion for turning wrenches with enthusiasm to learn, apply today! Summary: The Lube Technician is responsible for performing express lube duties on vehicles.
Pay Range:$18.50 per hour and above (based on factors such as technician level and job performance).
Supervisory Responsibilities: This job has no direct supervisory responsibilities.
Essential Duties and Responsibilitiesinclude the following: Adheres to express lube guidelines.
Performs lube, oil and filter changes by draining and replacing oil and filter, and lubricating all joints, including idler arm steering knuckles, tie rods ends and ball joints.
Reports all necessary repairs to service advisor.
Installs completed LOF reminder sticker in vehicle.
Checks battery, tire air pressure, windshield fluid, transmission fluid and power steering fluid levels and refills as needed.
Checks coolant level and refills as necessary.
Ensures that vehicle is clean and free of fluid residue or fingerprints.
Checks fluid level prior to release of vehicle to ensure proper levels.
Maintains CSI at or above Company standards Maintains an organized, clean and safe work area Participates in required training Records all hours worked accurately in company timekeeping system Follows Safeguards rules and regulations.
Demonstrates the Company’s Core Values Complies with Company policies and procedures Observes all Federal, State, Local and Company safety rules and regulations in the performance of duties.
Other duties as assigned Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with medical conditions to perform the essential functions.
Desired Education: o GED √ High School Diploma o Associate Degree o Bachelor Degree o Master Degree o Doctorate Degree Field of Study/Work Experience: o Accounting √ Automotive o Business o Human Resources o Information Technology Desired Work Experience: √ up to 3 years o 3-5 years o 5+ years Education/Experience: Basic knowledge of automotive parts and systems.
Demonstrable mechanical skills and knowledge.
Technical training or commensurate technical experience.
Certificates and Licenses: √ Valid Driver’s License o Automobile Salesperson License Computer Skills: Basic Computer skills to utilize timekeeping system.
Communication Skills: Ability to understand and follow instructions.
Ability to communicate effectively with customers and company personnel.
Attendance Expectations: The position requires regular and predictable attendance.
Scheduled shifts may include evening hours, weekends, and holidays.
Physical Demands: Must be able to lift up to (50) pounds.
While performing the duties of this job, the employee is regularly required to talk and hear; stand; walk; use hands to finger, handle, or feel; reach with hands and arms and stoop, kneel, crouch, or crawl.
Environment Demands: Duties are performed primarily in the service area.
Work includes movement around vehicles, working in various physical positions, and the safe operation of power tools and test equipment.
May be exposed to loud noise, vibration, exhaust fumes, and other service and repair conditions.
Frequently interacts with service advisors and the service manager.
Verbal and Writing Ability: Ability to read and comprehend instructions, correspondence, and memos.
Ability to effectively present information in one-on-one and small group situations to customers and other employees.
Math Ability: Ability to add, subtract, multiply and divide.
Reasoning Ability: Ability to apply common sense understanding to carry out instructions.
Ability to deal with standardized situations.
Ability to understand and follow technical manuals.
Core Values: To perform the job successfully, an individual should demonstrate the following Core Values: Servant Leadership Servant Leaders consciously put the needs of others before their own, because to serve people is to value them.
Teamwork through Trust & Respect Diversity is strength, and when we trust and respect one another we can work as a team to achieve at a high level.
Integrity Being honest and transparent with people, in an effort to do the right thing within the letter and spirit of the law, drives every action we take and every decision we make.
Commitment to Customer Enthusiasm Every day we recommit ourselves to the customer experience, and we are empowered to exceed the expectations of our customers.
Passion for Winning Hendrick’s tradition of winning is based on the idea of striving to be the best, not the biggest, and is therefore defined by how we treat our people.
Accountability at All Levels Taking ownership of our actions and our decisions allows us to grow as individuals, and support each other as a team.
Commitment to Continuous Improvement Every day we soften our hearts as well as our egos, in order to seek out and improve upon areas of opportunity within ourselves and our team.
This job description in no way states or implies that these are the only duties and responsibilities to be performed by this employee.
The employee will be required to follow any other instructions and to perform any other duties and responsibilities upon the request of a supervisor.
This job description is subject to revision at the discretion of the company.
Hendrick is an Equal Opportunity employer.
Minorities, women, veterans, and individuals with disabilities are encouraged to apply.
For more information regarding the EEOC, please visit .
Not Specified
H
Full Time Guest Services Representative
✦ New 🏢 Hendrick Automotive Group
Salary not disclosed
Hendrick Toyota North Charleston Location: 7151 Rivers Ave, North Charleston, South Carolina 29406 Summary: Ensures friendly and receptive environment for guests and provides administrative functions of the sales department through accurate recording of customer traffic and production of reports with critical sales process metrics.
Supervisory Responsibilities: This job has no direct supervisory responsibilities.
Essential Duties and Responsibilitiesinclude the following: Performs opening and closing Guest Services procedures.
Answers incoming phone calls in a courteous, prompt, and professional manager.
Directs phone calls to the appropriate person Takes accurate messages.
Directs customers to the appropriate person or department.
Manages the desk log, phone up log, loaner agreement log, dealer plate log, and gas card log.
Tracks and filters all incoming calls and takes messages.
Communicates effectively with Guest Services Manager and Greeters.
Reconciles/updates data entry with dealership software.
Produces Daily Reports: Daily Update (1, 5, Close), Performance Metric (core Guests Services reports).
Walks around the showroom hourly to offer refreshments to guests.
Provides a warm, positive and happy environment for Guests, their children and fellow teammates.
Helps maintain a clean and comfortable environment (monitor facility) Provides new hire Customer Management training when requested Maintains CSI at or above Company standards Maintains an organized, clean and safe work area Participates in required training Records all hours worked accurately in company timekeeping system Follows Safeguards rules and regulations.
Demonstrates the Company’s Core Values Complies with Company policies and procedures Observes all Federal, State, Local and Company safety rules and regulations in the performance of duties.
Other duties as assigned Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with medical conditions to perform the essential functions.
Desired Education: o GED √ High School Diploma o Associate Degree o Bachelor Degree o Master Degree o Doctorate Degree Field of Study/Work Experience: o Accounting o Automotive o Business o Human Resources o Information Technology Desired Work Experience: √ up to 3 years o 3-5 years o 5+ years Education/Experience: Previous customer service experience desired.
Excellent interpersonal, communication, and organizational skills are required.
Certificates and Licenses: o Valid Driver’s License o Automobile Salesperson License Computer Skills: Intermediate skills in Microsoft Office Products.
Ability to learn Dealership Management System and web based applications utilized in operations.
Communication Skills: Ability to understand and follow instructions.
Ability to communicate effectively with customers and company personnel.
Attendance Expectations: The position requires regular and predictable attendance.
Scheduled shifts may include evening hours, weekends, and holidays.
Physical Demands: While performing the duties of this job, the employee is regularly required to talk or hear.
The employee is frequently required to walk, stand, sit; use hands to finger, handle, and feel.
Environment Demands: Duties are performed primarily in the showroom or outdoor sales lot.
Heavy phone work.
Work includes frequent clerical and administrative responsibilities and interaction with customers and employees.
Due to the nature of this position, employee may be exposed to various work environments.
Verbal and Writing Ability: Ability to read and comprehend instructions, correspondence, and memos.
Math Ability: Ability to add, subtract, multiply and divide.
Reasoning Ability: Ability to apply common sense understanding to carry out instructions.
Ability to deal with standardized situations.
Core Values: To perform the job successfully, an individual should demonstrate the following Core Values: Servant Leadership Servant Leaders consciously put the needs of others before their own, because to serve people is to value them.
Teamwork through Trust & Respect Diversity is strength, and when we trust and respect one another we can work as a team to achieve at a high level.
Integrity Being honest and transparent with people, in an effort to do the right thing within the letter and spirit of the law, drives every action we take and every decision we make.
Commitment to Customer Enthusiasm Every day we recommit ourselves to the customer experience, and we are empowered to exceed the expectations of our customers.
Passion for Winning Hendrick’s tradition of winning is based on the idea of striving to be the best, not the biggest, and is therefore defined by how we treat our people.
Accountability at All Levels Taking ownership of our actions and our decisions allows us to grow as individuals, and support each other as a team.
Commitment to Continuous Improvement Every day we soften our hearts as well as our egos, in order to seek out and improve upon areas of opportunity within ourselves and our team.
This job description in no way states or implies that these are the only duties and responsibilities to be performed by this employee.
The employee will be required to follow any other instructions and to perform any other duties and responsibilities upon the request of a supervisor.
This job description is subject to revision at the discretion of the company.
Hendrick is an Equal Opportunity employer.
Minorities, women, veterans, and individuals with disabilities are encouraged to apply.
For more information regarding the EEOC, please visit .
Supervisory Responsibilities: This job has no direct supervisory responsibilities.
Essential Duties and Responsibilitiesinclude the following: Performs opening and closing Guest Services procedures.
Answers incoming phone calls in a courteous, prompt, and professional manager.
Directs phone calls to the appropriate person Takes accurate messages.
Directs customers to the appropriate person or department.
Manages the desk log, phone up log, loaner agreement log, dealer plate log, and gas card log.
Tracks and filters all incoming calls and takes messages.
Communicates effectively with Guest Services Manager and Greeters.
Reconciles/updates data entry with dealership software.
Produces Daily Reports: Daily Update (1, 5, Close), Performance Metric (core Guests Services reports).
Walks around the showroom hourly to offer refreshments to guests.
Provides a warm, positive and happy environment for Guests, their children and fellow teammates.
Helps maintain a clean and comfortable environment (monitor facility) Provides new hire Customer Management training when requested Maintains CSI at or above Company standards Maintains an organized, clean and safe work area Participates in required training Records all hours worked accurately in company timekeeping system Follows Safeguards rules and regulations.
Demonstrates the Company’s Core Values Complies with Company policies and procedures Observes all Federal, State, Local and Company safety rules and regulations in the performance of duties.
Other duties as assigned Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with medical conditions to perform the essential functions.
Desired Education: o GED √ High School Diploma o Associate Degree o Bachelor Degree o Master Degree o Doctorate Degree Field of Study/Work Experience: o Accounting o Automotive o Business o Human Resources o Information Technology Desired Work Experience: √ up to 3 years o 3-5 years o 5+ years Education/Experience: Previous customer service experience desired.
Excellent interpersonal, communication, and organizational skills are required.
Certificates and Licenses: o Valid Driver’s License o Automobile Salesperson License Computer Skills: Intermediate skills in Microsoft Office Products.
Ability to learn Dealership Management System and web based applications utilized in operations.
Communication Skills: Ability to understand and follow instructions.
Ability to communicate effectively with customers and company personnel.
Attendance Expectations: The position requires regular and predictable attendance.
Scheduled shifts may include evening hours, weekends, and holidays.
Physical Demands: While performing the duties of this job, the employee is regularly required to talk or hear.
The employee is frequently required to walk, stand, sit; use hands to finger, handle, and feel.
Environment Demands: Duties are performed primarily in the showroom or outdoor sales lot.
Heavy phone work.
Work includes frequent clerical and administrative responsibilities and interaction with customers and employees.
Due to the nature of this position, employee may be exposed to various work environments.
Verbal and Writing Ability: Ability to read and comprehend instructions, correspondence, and memos.
Math Ability: Ability to add, subtract, multiply and divide.
Reasoning Ability: Ability to apply common sense understanding to carry out instructions.
Ability to deal with standardized situations.
Core Values: To perform the job successfully, an individual should demonstrate the following Core Values: Servant Leadership Servant Leaders consciously put the needs of others before their own, because to serve people is to value them.
Teamwork through Trust & Respect Diversity is strength, and when we trust and respect one another we can work as a team to achieve at a high level.
Integrity Being honest and transparent with people, in an effort to do the right thing within the letter and spirit of the law, drives every action we take and every decision we make.
Commitment to Customer Enthusiasm Every day we recommit ourselves to the customer experience, and we are empowered to exceed the expectations of our customers.
Passion for Winning Hendrick’s tradition of winning is based on the idea of striving to be the best, not the biggest, and is therefore defined by how we treat our people.
Accountability at All Levels Taking ownership of our actions and our decisions allows us to grow as individuals, and support each other as a team.
Commitment to Continuous Improvement Every day we soften our hearts as well as our egos, in order to seek out and improve upon areas of opportunity within ourselves and our team.
This job description in no way states or implies that these are the only duties and responsibilities to be performed by this employee.
The employee will be required to follow any other instructions and to perform any other duties and responsibilities upon the request of a supervisor.
This job description is subject to revision at the discretion of the company.
Hendrick is an Equal Opportunity employer.
Minorities, women, veterans, and individuals with disabilities are encouraged to apply.
For more information regarding the EEOC, please visit .
permanent
H
Part Time Lube Technician
✦ New 🏢 Hendrick Automotive Group
Salary not disclosed
Honda Cars of Rock Hill Location: 686 Galleria Blvd, Rock Hill, South Carolina 29730 Summary: The Lube Technician is responsible for performing express lube duties on vehicles.
Supervisory Responsibilities: This job has no direct supervisory responsibilities.
Essential Duties and Responsibilitiesinclude the following: Adheres to express lube guidelines.
Performs lube, oil and filter changes by draining and replacing oil and filter, and lubricating all joints, including idler arm steering knuckles, tie rods ends and ball joints.
Reports all necessary repairs to service advisor.
Installs completed LOF reminder sticker in vehicle.
Checks battery, tire air pressure, windshield fluid, transmission fluid and power steering fluid levels and refills as needed.
Checks coolant level and refills as necessary.
Ensures that vehicle is clean and free of fluid residue or fingerprints.
Checks fluid level prior to release of vehicle to ensure proper levels.
Maintains CSI at or above Company standards Maintains an organized, clean and safe work area Participates in required training Records all hours worked accurately in company timekeeping system Follows Safeguards rules and regulations.
Demonstrates the Company’s Core Values Complies with Company policies and procedures Observes all Federal, State, Local and Company safety rules and regulations in the performance of duties.
Other duties as assigned Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with medical conditions to perform the essential functions.
Desired Education: o GED √ High School Diploma o Associate Degree o Bachelor Degree o Master Degree o Doctorate Degree Field of Study/Work Experience: o Accounting √ Automotive o Business o Human Resources o Information Technology Desired Work Experience: √ up to 3 years o 3-5 years o 5+ years Education/Experience: Basic knowledge of automotive parts and systems.
Demonstrable mechanical skills and knowledge.
Technical training or commensurate technical experience.
Certificates and Licenses: √ Valid Driver’s License o Automobile Salesperson License Computer Skills: Basic Computer skills to utilize timekeeping system.
Communication Skills: Ability to understand and follow instructions.
Ability to communicate effectively with customers and company personnel.
Attendance Expectations: The position requires regular and predictable attendance.
Scheduled shifts may include evening hours, weekends, and holidays.
Physical Demands: Must be able to lift up to (50) pounds.
While performing the duties of this job, the employee is regularly required to talk and hear; stand; walk; use hands to finger, handle, or feel; reach with hands and arms and stoop, kneel, crouch, or crawl.
Environment Demands: Duties are performed primarily in the service area.
Work includes movement around vehicles, working in various physical positions, and the safe operation of power tools and test equipment.
May be exposed to loud noise, vibration, exhaust fumes, and other service and repair conditions.
Frequently interacts with service advisors and the service manager.
Verbal and Writing Ability: Ability to read and comprehend instructions, correspondence, and memos.
Ability to effectively present information in one-on-one and small group situations to customers and other employees.
Math Ability: Ability to add, subtract, multiply and divide.
Reasoning Ability: Ability to apply common sense understanding to carry out instructions.
Ability to deal with standardized situations.
Ability to understand and follow technical manuals.
Core Values: To perform the job successfully, an individual should demonstrate the following Core Values: Servant Leadership Servant Leaders consciously put the needs of others before their own, because to serve people is to value them.
Teamwork through Trust & Respect Diversity is strength, and when we trust and respect one another we can work as a team to achieve at a high level.
Integrity Being honest and transparent with people, in an effort to do the right thing within the letter and spirit of the law, drives every action we take and every decision we make.
Commitment to Customer Enthusiasm Every day we recommit ourselves to the customer experience, and we are empowered to exceed the expectations of our customers.
Passion for Winning Hendrick’s tradition of winning is based on the idea of striving to be the best, not the biggest, and is therefore defined by how we treat our people.
Accountability at All Levels Taking ownership of our actions and our decisions allows us to grow as individuals, and support each other as a team.
Commitment to Continuous Improvement Every day we soften our hearts as well as our egos, in order to seek out and improve upon areas of opportunity within ourselves and our team.
This job description in no way states or implies that these are the only duties and responsibilities to be performed by this employee.
The employee will be required to follow any other instructions and to perform any other duties and responsibilities upon the request of a supervisor.
This job description is subject to revision at the discretion of the company.
Hendrick is an Equal Opportunity employer.
Minorities, women, veterans, and individuals with disabilities are encouraged to apply.
For more information regarding the EEOC, please visit .
Supervisory Responsibilities: This job has no direct supervisory responsibilities.
Essential Duties and Responsibilitiesinclude the following: Adheres to express lube guidelines.
Performs lube, oil and filter changes by draining and replacing oil and filter, and lubricating all joints, including idler arm steering knuckles, tie rods ends and ball joints.
Reports all necessary repairs to service advisor.
Installs completed LOF reminder sticker in vehicle.
Checks battery, tire air pressure, windshield fluid, transmission fluid and power steering fluid levels and refills as needed.
Checks coolant level and refills as necessary.
Ensures that vehicle is clean and free of fluid residue or fingerprints.
Checks fluid level prior to release of vehicle to ensure proper levels.
Maintains CSI at or above Company standards Maintains an organized, clean and safe work area Participates in required training Records all hours worked accurately in company timekeeping system Follows Safeguards rules and regulations.
Demonstrates the Company’s Core Values Complies with Company policies and procedures Observes all Federal, State, Local and Company safety rules and regulations in the performance of duties.
Other duties as assigned Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with medical conditions to perform the essential functions.
Desired Education: o GED √ High School Diploma o Associate Degree o Bachelor Degree o Master Degree o Doctorate Degree Field of Study/Work Experience: o Accounting √ Automotive o Business o Human Resources o Information Technology Desired Work Experience: √ up to 3 years o 3-5 years o 5+ years Education/Experience: Basic knowledge of automotive parts and systems.
Demonstrable mechanical skills and knowledge.
Technical training or commensurate technical experience.
Certificates and Licenses: √ Valid Driver’s License o Automobile Salesperson License Computer Skills: Basic Computer skills to utilize timekeeping system.
Communication Skills: Ability to understand and follow instructions.
Ability to communicate effectively with customers and company personnel.
Attendance Expectations: The position requires regular and predictable attendance.
Scheduled shifts may include evening hours, weekends, and holidays.
Physical Demands: Must be able to lift up to (50) pounds.
While performing the duties of this job, the employee is regularly required to talk and hear; stand; walk; use hands to finger, handle, or feel; reach with hands and arms and stoop, kneel, crouch, or crawl.
Environment Demands: Duties are performed primarily in the service area.
Work includes movement around vehicles, working in various physical positions, and the safe operation of power tools and test equipment.
May be exposed to loud noise, vibration, exhaust fumes, and other service and repair conditions.
Frequently interacts with service advisors and the service manager.
Verbal and Writing Ability: Ability to read and comprehend instructions, correspondence, and memos.
Ability to effectively present information in one-on-one and small group situations to customers and other employees.
Math Ability: Ability to add, subtract, multiply and divide.
Reasoning Ability: Ability to apply common sense understanding to carry out instructions.
Ability to deal with standardized situations.
Ability to understand and follow technical manuals.
Core Values: To perform the job successfully, an individual should demonstrate the following Core Values: Servant Leadership Servant Leaders consciously put the needs of others before their own, because to serve people is to value them.
Teamwork through Trust & Respect Diversity is strength, and when we trust and respect one another we can work as a team to achieve at a high level.
Integrity Being honest and transparent with people, in an effort to do the right thing within the letter and spirit of the law, drives every action we take and every decision we make.
Commitment to Customer Enthusiasm Every day we recommit ourselves to the customer experience, and we are empowered to exceed the expectations of our customers.
Passion for Winning Hendrick’s tradition of winning is based on the idea of striving to be the best, not the biggest, and is therefore defined by how we treat our people.
Accountability at All Levels Taking ownership of our actions and our decisions allows us to grow as individuals, and support each other as a team.
Commitment to Continuous Improvement Every day we soften our hearts as well as our egos, in order to seek out and improve upon areas of opportunity within ourselves and our team.
This job description in no way states or implies that these are the only duties and responsibilities to be performed by this employee.
The employee will be required to follow any other instructions and to perform any other duties and responsibilities upon the request of a supervisor.
This job description is subject to revision at the discretion of the company.
Hendrick is an Equal Opportunity employer.
Minorities, women, veterans, and individuals with disabilities are encouraged to apply.
For more information regarding the EEOC, please visit .
temporary
Dentist
Salary not disclosed
At CoreCivic, we do more than manage inmates, we care for people. CoreCivic is currently seeking Dentist who have a passion for providing the highest quality care in an institutional setting.
The Dentist is responsible for professional dental care for inmates/residents.
The successful applicant should be able to perform ALL the following functions at a pace and level of performance consistent with the actual job performance requirements.
- Perform routine dental treatment including examining teeth and gums for cavities, infections, and diseases; taking necessary x-rays; performing fillings, extractions, cleanings, full and partial dentures, and anterior and premolar root canals as warranted.
- Diagnose and develop dental treatment plans for inmates/residents.
- Develop, coordinate, and supervise the facility dental program to include advising and instructing inmates/residents in the cause and prevention of dental disease.
- Recruit, schedule, train, supervise and evaluate the performance of any subordinate staff.
- Consult with other health care staff and coordinate specialized or emergency dental care as needed.
- Control and inventory medications, syringes, dental instruments, and other dental supplies or equipment as required by established procedures.
- Keep work area clean; use or direct the use of appropriate sanitation and infection control methods.
- Prepare and maintain dental files and a variety of standard narrative, statistical, summary and/or operational records, reports, and logs, using appropriate grammar, to include filing, alphabetizing and labeling; review reports and records produced by staff; properly processes all reports and documents in a timely manner.
- Maintain absolute security and confidentiality of all dental records.
- Routinely audit dental files for documentation of all provided services.
- Monitor the provision of any required contract services.
- Coordinate professional dental and related services performed by external providers.
- Screen all requests for records and approve/disapprove responses as appropriate following policy and procedures.
- Provide input for facility dental budget requests.
- Identify financial responsibility (inmate/resident, corporate, insurance company, etc.) for all incurred expenses.
- Complete logs of all dental billings and assist the business office by reviewing all dental billings at least monthly.
- Evaluate and recommend methods of improving operational efficiency and cost effectiveness of dental and related services
- Audit pharmacy use for adherence to formulary.
- Monitor and supervise strict staff compliance with all applicable pharmacy laws, especially those covering controlled substances.
- Observe and record inmate/resident behavior.
- Maintain equipment and supplies as required; order replacement items in a timely manner; requisition appropriate purchases via the purchase order system.
- Inspect the dental unit for items that could be used as contraband by inmates/residents; securely store supplies and equipment or provide for their safe disposal.
- Monitor and evaluate physical safety requirements of both patients and staff to provide a safe working environment.
- Attend seminars, workshops, conferences, etc., as required.
- Accept on-call status.
- Monitor safety practices: prepare and disseminate safety and accident reports as required by policy; take appropriate action in cases of serious and unusual incidents and emergencies.
- Communicate effectively and coherently to administration, staff, inmates/residents, visitors, and the general public, particularly in situations requiring tact, diplomacy, understanding, fairness, firmness and good judgment. This includes giving information, instructions, and directions, mediating disputes, and providing reliable testimony, in court and other formal settings.
- Review, process and respond (via corporate counsel) to lawsuits; attend court hearings, when necessary; conduct research of charts; review status of inmates/residents with serious health problems for completion of all necessary intervention and treatment.
- Read, analyze, comprehend, and interpret technical procedures or governmental regulations, legal and non-legal documents, including the processing of such documents as medical instructions, commitment orders, summons and other legal writs.
- Coordinate the movement of inmates/residents to and from different areas for dental treatment.
- Initiate and complete investigations and inquiries with accuracy by gathering information and evidence, interviewing, and obtaining the statements of victims, witnesses, suspects, and confidential informers; exercise independent judgment by determining when probable cause exists to recommend or take disciplinary action.
- Reliably and repetitively identify inmates/residents by visual means.
- Perform searches of people and objects capable of concealing contraband. Search buildings and outdoor areas that will involve detecting and identifying objects and detaining people.
- Engage in functions in confined areas, physically checking the doors, windows, and other areas to verify they are secure.
- Endure verbal and mental abuse when confronted with the hostile views and opinions of inmates/residents and others encountered in an antagonistic environment.
- Take appropriate action to prevent or diffuse potentially disruptive situations.
- Perform rescue functions at accidents, emergencies, and disasters to include administering basic emergency medical aid, physically removing people away from dangerous situations, and securing and evacuating people from confined areas
- Define problems, collect data, establish facts, and draw valid conclusions; apply management techniques to problems of administration and devise workable solutions.
- Add, subtract, multiply and divide using whole numbers, common fractions and decimals; work with mathematical concepts such as fundamentals of plane and solid geometry and apply concepts such as fractions, percentages, ratios and proportions to practical situations.
- Interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
- Endeavor to comply with the requirements of applicable regulations, laws, rules, procedures, policies, standards and/or contract.
- Remain alert at all times and react quickly, efficiently and calmly in emergency and other high stress situations.
QUALIFICATIONS:
- Graduate of an approved school of dentistry and licensure as a dentist in the state of employment.
- At least one year of experience preferred. Must demonstrate good oral and written communication skills.
- A valid driver's license is preferred, unless required by contract or applicable statute.
- Must demonstrate a knowledge of correctional custody methods and techniques, pertinent facility rules, regulations, and standards.
- Minimum age requirement: Must be at least 18 years of age.
CoreCivic is a Drug-Free Workplace & EOE including Disability/Veteran
The Dentist is responsible for professional dental care for inmates/residents.
The successful applicant should be able to perform ALL the following functions at a pace and level of performance consistent with the actual job performance requirements.
- Perform routine dental treatment including examining teeth and gums for cavities, infections, and diseases; taking necessary x-rays; performing fillings, extractions, cleanings, full and partial dentures, and anterior and premolar root canals as warranted.
- Diagnose and develop dental treatment plans for inmates/residents.
- Develop, coordinate, and supervise the facility dental program to include advising and instructing inmates/residents in the cause and prevention of dental disease.
- Recruit, schedule, train, supervise and evaluate the performance of any subordinate staff.
- Consult with other health care staff and coordinate specialized or emergency dental care as needed.
- Control and inventory medications, syringes, dental instruments, and other dental supplies or equipment as required by established procedures.
- Keep work area clean; use or direct the use of appropriate sanitation and infection control methods.
- Prepare and maintain dental files and a variety of standard narrative, statistical, summary and/or operational records, reports, and logs, using appropriate grammar, to include filing, alphabetizing and labeling; review reports and records produced by staff; properly processes all reports and documents in a timely manner.
- Maintain absolute security and confidentiality of all dental records.
- Routinely audit dental files for documentation of all provided services.
- Monitor the provision of any required contract services.
- Coordinate professional dental and related services performed by external providers.
- Screen all requests for records and approve/disapprove responses as appropriate following policy and procedures.
- Provide input for facility dental budget requests.
- Identify financial responsibility (inmate/resident, corporate, insurance company, etc.) for all incurred expenses.
- Complete logs of all dental billings and assist the business office by reviewing all dental billings at least monthly.
- Evaluate and recommend methods of improving operational efficiency and cost effectiveness of dental and related services
- Audit pharmacy use for adherence to formulary.
- Monitor and supervise strict staff compliance with all applicable pharmacy laws, especially those covering controlled substances.
- Observe and record inmate/resident behavior.
- Maintain equipment and supplies as required; order replacement items in a timely manner; requisition appropriate purchases via the purchase order system.
- Inspect the dental unit for items that could be used as contraband by inmates/residents; securely store supplies and equipment or provide for their safe disposal.
- Monitor and evaluate physical safety requirements of both patients and staff to provide a safe working environment.
- Attend seminars, workshops, conferences, etc., as required.
- Accept on-call status.
- Monitor safety practices: prepare and disseminate safety and accident reports as required by policy; take appropriate action in cases of serious and unusual incidents and emergencies.
- Communicate effectively and coherently to administration, staff, inmates/residents, visitors, and the general public, particularly in situations requiring tact, diplomacy, understanding, fairness, firmness and good judgment. This includes giving information, instructions, and directions, mediating disputes, and providing reliable testimony, in court and other formal settings.
- Review, process and respond (via corporate counsel) to lawsuits; attend court hearings, when necessary; conduct research of charts; review status of inmates/residents with serious health problems for completion of all necessary intervention and treatment.
- Read, analyze, comprehend, and interpret technical procedures or governmental regulations, legal and non-legal documents, including the processing of such documents as medical instructions, commitment orders, summons and other legal writs.
- Coordinate the movement of inmates/residents to and from different areas for dental treatment.
- Initiate and complete investigations and inquiries with accuracy by gathering information and evidence, interviewing, and obtaining the statements of victims, witnesses, suspects, and confidential informers; exercise independent judgment by determining when probable cause exists to recommend or take disciplinary action.
- Reliably and repetitively identify inmates/residents by visual means.
- Perform searches of people and objects capable of concealing contraband. Search buildings and outdoor areas that will involve detecting and identifying objects and detaining people.
- Engage in functions in confined areas, physically checking the doors, windows, and other areas to verify they are secure.
- Endure verbal and mental abuse when confronted with the hostile views and opinions of inmates/residents and others encountered in an antagonistic environment.
- Take appropriate action to prevent or diffuse potentially disruptive situations.
- Perform rescue functions at accidents, emergencies, and disasters to include administering basic emergency medical aid, physically removing people away from dangerous situations, and securing and evacuating people from confined areas
- Define problems, collect data, establish facts, and draw valid conclusions; apply management techniques to problems of administration and devise workable solutions.
- Add, subtract, multiply and divide using whole numbers, common fractions and decimals; work with mathematical concepts such as fundamentals of plane and solid geometry and apply concepts such as fractions, percentages, ratios and proportions to practical situations.
- Interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
- Endeavor to comply with the requirements of applicable regulations, laws, rules, procedures, policies, standards and/or contract.
- Remain alert at all times and react quickly, efficiently and calmly in emergency and other high stress situations.
QUALIFICATIONS:
- Graduate of an approved school of dentistry and licensure as a dentist in the state of employment.
- At least one year of experience preferred. Must demonstrate good oral and written communication skills.
- A valid driver's license is preferred, unless required by contract or applicable statute.
- Must demonstrate a knowledge of correctional custody methods and techniques, pertinent facility rules, regulations, and standards.
- Minimum age requirement: Must be at least 18 years of age.
CoreCivic is a Drug-Free Workplace & EOE including Disability/Veteran
Not Specified
W
Wok Cook
Salary not disclosed
Company Description
ABOU WESTGATE RESORTS
Westgate Resorts provides a diverse range of vacation experiences. From sandy beaches on the Atlantic Ocean to snow-covered Utah mountains, families can affordably experience the country's most desirable vacation destinations. A world leader in the timeshare and hospitality industry, Westgate has resorts in Florida, Tennessee, South Carolina, Missouri, Utah, Nevada, and Arizona. Westgate meets every vacation expectation, for every family, for every budget. As we continue growing, we will continue offering the best and most-affordable vacation options out there!
Job Description
General Summary Of Duties:
Supervise and participate with all specialty room kitchen personnel to prepare, cook and present food according to hotel standard recipes. Create quality food products to ensure guest satisfaction.
Role and Responsibilities: (Includes but is not limited to the following)
Performance Requirements: (Knowledge, skills and abilities)
ABOU WESTGATE RESORTS
Westgate Resorts provides a diverse range of vacation experiences. From sandy beaches on the Atlantic Ocean to snow-covered Utah mountains, families can affordably experience the country's most desirable vacation destinations. A world leader in the timeshare and hospitality industry, Westgate has resorts in Florida, Tennessee, South Carolina, Missouri, Utah, Nevada, and Arizona. Westgate meets every vacation expectation, for every family, for every budget. As we continue growing, we will continue offering the best and most-affordable vacation options out there!
Job Description
General Summary Of Duties:
Supervise and participate with all specialty room kitchen personnel to prepare, cook and present food according to hotel standard recipes. Create quality food products to ensure guest satisfaction.
Role and Responsibilities: (Includes but is not limited to the following)
- Assign, in detail, specific duties to all employees under supervision for efficient operation of kitchen. Train and supervise kitchen staff in the proper preparation of menu items.
- Assist in preparation of food items according to standard recipes and/or as specified on guest check to ensure consistency of product to the guest.
- Ensure proper receiving, storage and rotation of food products so as to comply with regulations.
- Adhere to control procedures for cost and quality.
- Reports any equipment in need of repair to chef and engineering for service.
Performance Requirements: (Knowledge, skills and abilities)
- Ability to read, write, speak and understand the English language to read and utilize math skills for recipes, measurements and food requests.
- Communicate effectively both verbally and in writing to provide clear direction to staff. Assign and instruct staff in details of work. Observe performance and encourage improvement. Monitor level of workload and make staffing adjustments accordingly.
- Ability to read, write, speak and understand the English language in order to complete inventories, requisitions and communicate with other employees and/or verbal instructions and to provide clear direction, instruction and guidance to staff. Ability to relate to all levels of management, guests and employees in verbal/written form.
- Ability to read, write, speak and understand the English language to comprehend and follow written and/or verbal instructions from management, guests and employees.
- Communicate with supervisor throughout the shift.
- Ability to perform duties within hot to normal to cold temperature ranges.
- Sufficient manual dexterity of hand in order to use knives and kitchen tools.
- Ability to operate kitchen equipment including: steamer, deep fryer, ovens, broilers, and grills.
- Ability to organize/prioritize work and meet deadlines.
- Directs and actively participates with staff to complete all job assignments.
- Ability to exercise judgment and implement control over the performance of staff.
- Supervise all staff including training, counseling and discipline.
- Adheres to control procedure for food costs, labor costs, and quality.
- Ability to deal with a number of problems requiring initiative and good judgment.
- Perform all assigned side work to include replenishing/restocking work station with supplies.
- Check station before, during and after shift for proper set-up and cleanliness.
- Keep spoilage/waste to a minimum by ordering and utilizing proper quantities and rotating products/inventory.
- All HAZCOM positions: Ability to comprehend product labeling instructions to enable the safe application of products and processes with the Hotel.
- Maintain inventory of supplies needed to perform job function.
- Good working knowledge of accepted standards of sanitation.
- Ability to read, write, speak and understand the English language to comprehend product labeling instructions to enable the safe application of products and processes.
- "CLEAN AS YOU GO" -- Keep your workstation neat and orderly, and perform general cleaning tasks using standard hotel cleaning products, as assigned, to adhere to standards.
- Ability to maintain attendance in conformance with standards.
- Ability to maintain a neat, clean and well-groomed appearance.
Not Specified
Assembler - Hiring Now
Salary not disclosed
Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances.
Title: Assembler
Location: Mocksville, NC (Onsite) (338 Valley Rd. Mocksville, NC 27028)
Shift: 2nd Shift (1st shift - Monday - Friday 2pm - 10pm)
About Us:
Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn and join us to own your future.
Job Overview:
We are looking for a skilled assembler to perform a variety of tasks as assigned in conjunction with the assembly of our product. You will ensure all parts fit correctly and are suitable for the final product. This position is responsible for safely performing high-level continuous work to quality standards. Assignments may change based on business demands.
You must have desired technical knowledge and possess great manual dexterity. Ability to interpret instructions represented in manuals, drawings, schematics etc. and follow them with precision.
Responsibilities:
Requirements:
Key Competencies:
Preferences:
Travel & Work Arrangements/Requirements:
This position will be based at our site in Mocksville, NC, with no anticipated travel.
What we Offer:
At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond.
Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit NOW
Title: Assembler
Location: Mocksville, NC (Onsite) (338 Valley Rd. Mocksville, NC 27028)
Shift: 2nd Shift (1st shift - Monday - Friday 2pm - 10pm)
About Us:
Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn and join us to own your future.
Job Overview:
We are looking for a skilled assembler to perform a variety of tasks as assigned in conjunction with the assembly of our product. You will ensure all parts fit correctly and are suitable for the final product. This position is responsible for safely performing high-level continuous work to quality standards. Assignments may change based on business demands.
You must have desired technical knowledge and possess great manual dexterity. Ability to interpret instructions represented in manuals, drawings, schematics etc. and follow them with precision.
Responsibilities:
- Performs all mechanical assembly operations of sub-assemblies and package assembly, all sensitive and very detailed assembly operations, some electrical, instrumentation and control elements of the package, and functional test set up including in-process quality checks and tests.?
- Performs disassembly and rebuild of air ends, or sensitive rotating assemblies.
- Reads and interprets engineering drawings, specifications, assembly instructions, bills of material, and quality control documents.?
- Takes responsibility for quality and work content performed in the applicable operation by signing off on the appropriate documentation prior to indexing to the next step in process.
- Insures that all tools used in performing job duties are within calibration, as stated on calibration sticker. Where discrepancies arise, immediate notification of supervisor occurs.
- Performs job duties with limited supervision.
- Maintains clean, orderly, and safe work area and follow all safety rules and procedures.?
- Identifies safety concerns and drives for successful resolution.
- Assists in the training of other department personnel as required.
- Uses problem solving skills (identify problems and respond correctly).? Shall be capable of performing disassembly and rebuild of air ends, or sensitive rotating assemblies
- Exhibits a high degree of manual dexterity with great attention to detail and workmanship
- Use of calipers, dial, indicators, precision measuring devices.
- Participates in departmental projects, as needed (ex. Lean initiatives, restructuring the cell layout, continuous improvement). And other assigned duties
Requirements:
- High School Diploma or GED
- 1+ years experience with manufacturing setting
Key Competencies:
- Knowledge of and willingness to comply with all general work rules, policies and procedures, including safety guidelines and procedures.
- Able to rely on experience and judgment to plan and accomplish goals.
- Ability to learn to operate all equipment associated with the job; including, but not limited to, power hand tools, forklifts, skyjacks, cranes, and measuring devices.
- Ability to identify routine problem causation, and correct routine problems, and willingness to learn.
- Broad working knowledge and experience with standard work instructions.
- Team oriented, must have the ability to work cohesively with others.
- Must possess ability to work well in a manufacturing environment.
- Must be detail-oriented and self-motivated.
- Must be able to work in a fast-paced, multi-tasked environment.
- Must be able to stand; use hands to finger, handle, or feel; walk; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear continuously for 8-10 hours per day and occasionally on a sixth working day.
- Pulling/pushing of tubs, up to a maximum of 50lbs.
- Regularly lift up to 35 pounds.
Preferences:
- Strong problem solving skills (identify problems and respond correctly).
- Ability to read and interpret engineering drawings, specifications, assembly instructions, bills of material and quality control documents.
- Ability to use correct tooling, fixturing and equipment to perform work tasks to engineering specifications.
- Ability to function in a flexible team environment.
- Formal training from technical or trade school is desired
Travel & Work Arrangements/Requirements:
This position will be based at our site in Mocksville, NC, with no anticipated travel.
What we Offer:
At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond.
Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit NOW
Not Specified
G
Assembler - Manufacturing
Salary not disclosed
Description
Job Title: Assembler
Reports To: Manufacturing Supervisor
Level of Work: I
Position Summary: Working with blue prints, assembly drawings, specifications, sketches, and verbal and written instructions, assembles, disassembles, repairs and adjusts a variety of units, attachments, components and/or accessories. Reports directly to Production Supervisor or his/her designate.
Key Results Areas by level of work
Level I: Quality - Complete and accurate work performed efficiently
1. Production quality and efficiency using appropriate tools and equipment, qualified to perform special processes as needed
a. Working on assembly operations, sub assembly operations, attachments and/or accessories.
b. Size of positioning of work may require incumbents of this position to operate a variety of material handling equipment including jibs, overhead cranes, and their accessories.
c. Uses an assortment of measuring tools
d. Consistently meets customer's quality requirements and expectations.
2. Follow instructions - oral and/or written
a. Can properly read all blueprint and work instructions
b. Will provide instruction and guidance to employees assigned to assist and as required, will participate in training of welders and other employees of the department of lesser classification.
c. Performs other duties as assigned by the Production Supervisor, weld shop, or his/her designate.
3. Safety & housekeeping
a. Work may require use of scaffold, ladders, forklift, and/or scissor lift.
b. Work may require the use of a crane to move part.
c. Maintains a clean work area with no clutter.
d. Practices safety at all times while at work.
e. Follows safety policies and procedures and speaks up when others are non-compliant.
f. Wears all safety equipment for area of work.
4. Continual Improvement suggestions
a. Keeps an open mind to others continuous improvement suggestions
b. Bring continuous improvement suggestions to the appropriate team member.
5. Professional Development
a. Demonstrates initiative, positive attitude, and enthusiasm for the job
b. Will follow up with supervisor on professional development goals and opportunities
Takes an interest and lets it be known that they have a desire to grow with the company
Requirements
Qualifications:
To qualify for this position, an individual must possess the knowledge, training, experience and abilities required.
Education and Training
Technical Trades School in Welding
High school GED Required
Experience:
1+ years of Assembly experience.
Other:
Must be willing to work overtime as required.
Minimal travel may be required
Skills:
To perform the job successfully, an individual should demonstrate the following competencies:
1. Ability and willingness to abide by set policies and/or safety programs established by GHM, our clients, and/or regulatory agencies which govern our performance and behavior in the normal course of our work while on GHM or the client's property or job site.
2. Strong organization and time management skills.
3. High attention to detail.
4. Demonstrate behavior consistent with company values.
5. Ability to work independently, with minimal direction as a highly motivated self-starter and within a team oriented culture.
6. Exhibits polite and professional communication via phone, e-mail and mail.
7. Follows instructions, responds to management direction; takes responsibility for own actions; keeps commitments; commits to long hours of work when necessary to reach goals; completes tasks on time or notifies appropriate person with an alternate plan.
8. Maintain a collaborative relationship with internal and external stakeholders.
9. Obtains support and cooperation from others and reciprocates; demonstrates positive behaviors, displaying tact, respect, and understanding when dealing with others; proactively engages and confronts issues to achieve continual improvement.
10. Meets challenges with resourcefulness, generates suggestions for improving work; develops innovative approaches and ideas; presents ideas and information in a manner that gets others attention.
11. Demonstrates pride in workmanship and commitment to continual quality improvement; maintains clean, organized work area; maintains accurate and timely labor reporting; makes improvement based on lessons learned; maintains strict adherence to quality system requirements.
12. Ability to add, subtract, multiply, divide in all units of measure, using whole numbers, common fractions, and decimals.
13. Ability to thrive in a team environment.
Physical and Mental Demands
The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Physical demands: While performing the duties of this position, the incumbent is primarily required to sit, stand, walk, stoop, and bend. Required to speak and communicate clearly with others. Corrected vision to 20/20 or adequate and ability to identify and distinguish colors.
Mental demands: While performing the duties of this position, the incumbent is required to read, write, analyze data and reports, exercise judgment, develop plans, procedures and goals, present information to others and work under pressure.
Work Environment: While performing the duties of this position, the incumbent is also exposed to high level of manufacturing and equipment noise. Duties are performed indoors in a manufacturing environment with temperature changes. Exposure to hazardous materials, fumes or airborne particles and moving mechanical parts with vibration.
Work Authorization
Must be able to work in the U.S without sponsorship.
Job Title: Assembler
Reports To: Manufacturing Supervisor
Level of Work: I
Position Summary: Working with blue prints, assembly drawings, specifications, sketches, and verbal and written instructions, assembles, disassembles, repairs and adjusts a variety of units, attachments, components and/or accessories. Reports directly to Production Supervisor or his/her designate.
Key Results Areas by level of work
Level I: Quality - Complete and accurate work performed efficiently
1. Production quality and efficiency using appropriate tools and equipment, qualified to perform special processes as needed
a. Working on assembly operations, sub assembly operations, attachments and/or accessories.
b. Size of positioning of work may require incumbents of this position to operate a variety of material handling equipment including jibs, overhead cranes, and their accessories.
c. Uses an assortment of measuring tools
d. Consistently meets customer's quality requirements and expectations.
2. Follow instructions - oral and/or written
a. Can properly read all blueprint and work instructions
b. Will provide instruction and guidance to employees assigned to assist and as required, will participate in training of welders and other employees of the department of lesser classification.
c. Performs other duties as assigned by the Production Supervisor, weld shop, or his/her designate.
3. Safety & housekeeping
a. Work may require use of scaffold, ladders, forklift, and/or scissor lift.
b. Work may require the use of a crane to move part.
c. Maintains a clean work area with no clutter.
d. Practices safety at all times while at work.
e. Follows safety policies and procedures and speaks up when others are non-compliant.
f. Wears all safety equipment for area of work.
4. Continual Improvement suggestions
a. Keeps an open mind to others continuous improvement suggestions
b. Bring continuous improvement suggestions to the appropriate team member.
5. Professional Development
a. Demonstrates initiative, positive attitude, and enthusiasm for the job
b. Will follow up with supervisor on professional development goals and opportunities
Takes an interest and lets it be known that they have a desire to grow with the company
Requirements
Qualifications:
To qualify for this position, an individual must possess the knowledge, training, experience and abilities required.
Education and Training
Technical Trades School in Welding
High school GED Required
Experience:
1+ years of Assembly experience.
Other:
Must be willing to work overtime as required.
Minimal travel may be required
Skills:
To perform the job successfully, an individual should demonstrate the following competencies:
1. Ability and willingness to abide by set policies and/or safety programs established by GHM, our clients, and/or regulatory agencies which govern our performance and behavior in the normal course of our work while on GHM or the client's property or job site.
2. Strong organization and time management skills.
3. High attention to detail.
4. Demonstrate behavior consistent with company values.
5. Ability to work independently, with minimal direction as a highly motivated self-starter and within a team oriented culture.
6. Exhibits polite and professional communication via phone, e-mail and mail.
7. Follows instructions, responds to management direction; takes responsibility for own actions; keeps commitments; commits to long hours of work when necessary to reach goals; completes tasks on time or notifies appropriate person with an alternate plan.
8. Maintain a collaborative relationship with internal and external stakeholders.
9. Obtains support and cooperation from others and reciprocates; demonstrates positive behaviors, displaying tact, respect, and understanding when dealing with others; proactively engages and confronts issues to achieve continual improvement.
10. Meets challenges with resourcefulness, generates suggestions for improving work; develops innovative approaches and ideas; presents ideas and information in a manner that gets others attention.
11. Demonstrates pride in workmanship and commitment to continual quality improvement; maintains clean, organized work area; maintains accurate and timely labor reporting; makes improvement based on lessons learned; maintains strict adherence to quality system requirements.
12. Ability to add, subtract, multiply, divide in all units of measure, using whole numbers, common fractions, and decimals.
13. Ability to thrive in a team environment.
Physical and Mental Demands
The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Physical demands: While performing the duties of this position, the incumbent is primarily required to sit, stand, walk, stoop, and bend. Required to speak and communicate clearly with others. Corrected vision to 20/20 or adequate and ability to identify and distinguish colors.
Mental demands: While performing the duties of this position, the incumbent is required to read, write, analyze data and reports, exercise judgment, develop plans, procedures and goals, present information to others and work under pressure.
Work Environment: While performing the duties of this position, the incumbent is also exposed to high level of manufacturing and equipment noise. Duties are performed indoors in a manufacturing environment with temperature changes. Exposure to hazardous materials, fumes or airborne particles and moving mechanical parts with vibration.
Work Authorization
Must be able to work in the U.S without sponsorship.
Not Specified
W
Mechanical Assembler 1 - Repairs
✦ New
Salary not disclosed
Woodward is committed to creating a great workplace for all team members. Our company and its members are committed to acting with integrity, being respectful and accountable to one another, and staying humble and driven, while maintaining the highest professional and ethical standards.
We are steadfastly committed to attracting the best talent across our communities creating a rewarding workplace. Together we are fulfilling our purpose to design and deliver energy control solutions our partners count on to power a clean future.
Woodward supports our members' wellbeing and regularly benchmarks with other companies in our industry to offer an extensive Total Reward package for this position. Salary will be determined by the applicant's education, experience, knowledge, skills, and abilities, as well as internal equity and alignment with market data.
At Woodward, we are proud to deliver cutting-edge motion control systems that power the latest commercial and military aircraft. You will play a key role on a team that produces pilot controls, electromechanical actuators, motors, and position sensors. From airliners and helicopters to business and fighter jets, our products support flight across the globe every day. Trusted by industry leaders, our innovative technology continues to set new standards in aerospace performance and safety
Are you ready to make your mark? If you are interested in becoming a Mechanical Assembler at Woodward, we have an exciting opportunity for you!
Mechanical Assembler reports to the manufacturing supervisor and is responsible for assembling, installing, aligning, adjusting, and fitting subassemblies and parts or auxiliary equipment using appropriate tools and equipment, in an industrial setting. The position works under some supervision and limited contact with external suppliers or customers.
What you will be doing...
What we are looking for...
Level I:
Level II:
This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR). All applicants must be U.S. persons within the meaning of ITAR and EAR, or possess all required authorizations from the U.S. Department of State Department and the U.S. Department of Commerce. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.
Woodward is an Equal Opportunity Employer
EO/AA/M/F/Disabled/Protected Veterans
We are steadfastly committed to attracting the best talent across our communities creating a rewarding workplace. Together we are fulfilling our purpose to design and deliver energy control solutions our partners count on to power a clean future.
Woodward supports our members' wellbeing and regularly benchmarks with other companies in our industry to offer an extensive Total Reward package for this position. Salary will be determined by the applicant's education, experience, knowledge, skills, and abilities, as well as internal equity and alignment with market data.
- Level I: $15.83 - $24.65
- Level II: $16.49 - $28.60
- 1st Shift Hours: 6:00am-2:30pm
- All members included in annual cash bonus opportunity
- 401(k) match (4.5%)
- Annual Woodward stock contribution (5%)
- Tuition reimbursement and Training/Professional Development opportunities for all members
- 12 paid holidays, including floating holidays
- Industry leading medical, dental, and vision Insurance upon date of hire
- Vacation / Sick Time / Vacation Buy-up / Short Term Disability / Bereavement leave
- Adoption Assistance
- Employee Assistance Program, including mental health benefits
- Member Life & AD&D / Long Term Disability / Member Optional Life
- Member referral bonus
- Spouse / Child Optional Life / Optional AD&D / Healthcare and Dependent Care Flexible Spending
- Voluntary benefits, including:
- Home / Auto Insurance discounts
- Whole Life Insurance / Critical Illness Insurance / Legal Assistance / Military Leave
At Woodward, we are proud to deliver cutting-edge motion control systems that power the latest commercial and military aircraft. You will play a key role on a team that produces pilot controls, electromechanical actuators, motors, and position sensors. From airliners and helicopters to business and fighter jets, our products support flight across the globe every day. Trusted by industry leaders, our innovative technology continues to set new standards in aerospace performance and safety
Are you ready to make your mark? If you are interested in becoming a Mechanical Assembler at Woodward, we have an exciting opportunity for you!
Mechanical Assembler reports to the manufacturing supervisor and is responsible for assembling, installing, aligning, adjusting, and fitting subassemblies and parts or auxiliary equipment using appropriate tools and equipment, in an industrial setting. The position works under some supervision and limited contact with external suppliers or customers.
What you will be doing...
- Assemble and/or perform preset calibration/final testing. Performs low to moderately complex assembly and test. Products may include but are not limited to small products, light subassemblies, and/or complete units of a smaller size.
- Assemble, install, align, adjust and fit subassemblies and parts or auxiliary equipment using appropriate tools and equipment as per work instructions.
- Clean parts and maintain tooling and equipment per proper work instructions.
- Follow work instructions associated with assembly skills to become certified for work being performed.
- Work with close tolerances and fits to meet engineering and operating requirements.
- Complete all required paperwork in an accurate and efficient manner, including Quality Assurance and Test Record.
What we are looking for...
Level I:
- High school diploma or equivalent required
- Mechanical aptitude required
- Ability to use a variety of basic hand tools
- Basic written/verbal communication skills
- Basic computer skills
- Willingness to demonstrate eagerness, enthusiasm, and optimism for work activities
- Detail orientation and ability to follow work instructions
Level II:
- High school diploma or equivalent required
- 2-5 years of related experience required
- Mechanical aptitude required
- Ability to use a variety of basic hand tools
- Basic written/verbal communication skills
- Basic computer skills
- Willingness to demonstrate eagerness, enthusiasm, and optimism for work activities
- Detail orientation and ability to follow work instructions
This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR). All applicants must be U.S. persons within the meaning of ITAR and EAR, or possess all required authorizations from the U.S. Department of State Department and the U.S. Department of Commerce. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.
Woodward is an Equal Opportunity Employer
EO/AA/M/F/Disabled/Protected Veterans
Not Specified
B
Nuclear Welder $40.82/hour
✦ New 🏢 BWXT
Salary not disclosed
At BWX Technologies, Inc. (NYSE: BWXT), we are People Strong, Innovation Driven. A U.S.-based company, BWXT is a Fortune 1000 and Defense News Top 100 manufacturing and engineering innovator that provides safe and effective nuclear solutions for global security, clean energy, environmental restoration, nuclear medicine and space exploration. With more than 7,800 employees, BWXT has 14 major operating sites in the U.S., Canada and the U.K. We are the sole manufacturer of naval nuclear reactors for U.S. submarines and aircraft carriers. Our company supplies precision manufactured components, services and fuel for the commercial nuclear power industry across four continents. Our joint ventures provide environmental restoration and operations management at a dozen U.S. Department of Energy and NASA facilities. BWXT's technology is driving advances in medical radioisotope production in North America and microreactors for various defense and space applications. For more information, visit . Follow us on LinkedIn , X , Facebook and Instagram .
Welcome to BWXT
We believe in empowering our employees and cultivating a dynamic workplace that fosters growth and collaboration. Whether you're an experienced professional or just starting your career, you'll find opportunities to challenge yourself, learn from seasoned experts, and contribute to nuclear innovation. We required a diverse range of skills to support our work in the markets that drive our business and welcome candidates from all backgrounds and life stages who are passionate about making a difference.
Position Overview:
As our Nuclear Welder, you will weld a variety of metals completing welding details on materials ranging from heavy machined parts to thinned wall components using weld jigs, fixtures, special machine racks and frames, and like items.
Location:
On-site in Euclid, Ohio
Your Day to Day as a Nuclear Welder:
Required Qualifications:
What We Offer:
Pay: $40.82
The starting rate for this position in Ohio (US-OH) is $40.82 per hour. The total compensation package for this position may also include a full range of medical, retirement and/or other benefits. Details of participation in these benefit plans will be provided at such time the selected job candidate receives an offer of employment and are subject to a collective bargaining agreement.
As a federal government contractor, BWX Technologies, Inc. and any subsidiaries, affiliates and related entities (\"BWXT\" or the \"Company\") complies with all federal, state, and local laws and customer requirements regarding health and safety protocols. As such, all BWXT new hires will be required to adhere to applicable Company health and safety requirements within the workplace as a condition of employment.
BWXT is committed to the concept of Equal Employment Opportunity. We have established procedures to ensure that all personnel actions such as recruitment, compensation, career development, benefits, company-sponsored training and social recreational programs are administered without regard to race, color, religion, sex, national origin, citizenship, age, disability, protected veteran or other protected status.
All candidates must be U.S. citizens. Selected applicants are required to successfully complete a pre-employment check and drug screening. In addition, the position may require the ability to obtain and maintain applicable federal eligibility requirements for access to classified/sensitive information or matter which involves an extensive criminal and financial background investigation, drug test, previous employment, and reference verifications.
BWX Technologies, Inc. and its affiliates and subsidiaries (BWXT) is not responsible for and does not accept any liability for fees or other costs associated with resumes or candidates presented by recruiters or employment agencies, unless a binding, written recruitment agreement between BWXT and the recruiter or agency exists prior to the presentation of candidates or resumes to BWXT and includes the specific services, job openings, and fees to be paid (\"Agreement\"). BWXT may consider any candidate for whom a recruiter or agency has submitted an unsolicited resume and explicitly reserves the right to hire such candidate(s) without any financial obligation to the recruiter or agency unless an Agreement is in place prior to presentation and such Agreement explicitly encompasses the job opening for which such fees or costs are sought. An email, verbal or other informal contact with any person within BWXT will not create a binding agreement. Agencies or recruiters without an Agreement are directed not to contact any hiring managers of BWXT with recruiting inquiries or resumes. Recruiters and agencies interested in partnering with BWXT may contact BWXT's Talent Acquisition team at [email protected].
Job Segment: Nuclear, 2nd Shift, 3rd Shift, Inspector, Energy, Night, Aviation, Quality
Welcome to BWXT
We believe in empowering our employees and cultivating a dynamic workplace that fosters growth and collaboration. Whether you're an experienced professional or just starting your career, you'll find opportunities to challenge yourself, learn from seasoned experts, and contribute to nuclear innovation. We required a diverse range of skills to support our work in the markets that drive our business and welcome candidates from all backgrounds and life stages who are passionate about making a difference.
Position Overview:
As our Nuclear Welder, you will weld a variety of metals completing welding details on materials ranging from heavy machined parts to thinned wall components using weld jigs, fixtures, special machine racks and frames, and like items.
Location:
On-site in Euclid, Ohio
Your Day to Day as a Nuclear Welder:
- Perform delicate weld operations on very expensive components and assemblies and other difficult details. May necessitate the adaptation of available fixtures.
- Work from specific approved procedures and complex blueprints. Work in close cooperation with weld engineer, weld inspector, and other authorized personnel.
- Reads and strictly complies with weld blueprints, weld procedures, and work instructions.
- Grinding to remove slag inclusions, excessive weld, burrs, or other pre-post steps required to make an acceptable weld.
- Must become certified to all requirements of BWXT contracts pertaining to welding and/or brazing, imposed on BWXT both now and in the future.
- Inspect all work using appropriate measurement instruments.
- Refers all issues/problems to supervisor for disposition.
- Completes and maintains all documentation as directed by work instructions and policies.
- Cleans machine, tooling, and parts.
- Performs machine maintenance, housekeeping, and other duties as assigned by supervision.
- Follows and complies with all operation instructions, work rules, and safety policies.
Required Qualifications:
- High school diploma or its equivalent is required.
- Minimum of two (2) years of experience in manual and automatic gas tungsten arc and/or shield arc welding, completion of an accredited training program will be considered.
- Brazing and soldiering skills, preferred.
- If necessary, be able to demonstrate ability to perform above skills on a test piece.
- Ability to read and interpret complex blueprints, procedures, and work instructions.
- Possess skills necessary to maintain accurate documentation.
- Ability to obtain and maintain all applicable written and operation examinations.
- Ability to obtain and maintain all applicable certifications.
- Possess necessary personal tools.
- Must be willing and available to work any shift (2nd shift: 3pm - 11pm, 3rd shift: 11pm - 7am).
What We Offer:
- Competitive salary and benefits package, including health, dental, and retirement plans.
- Flexible work schedules and paid time off to promote a healthy work-life balance.
- Professional development opportunities, including mentorship programs and sponsorship for continuing education.
- An inclusive atmosphere that celebrates new perspectives and supports collaboration between different generations.
- The chance to be part of a mission-driven organization making a positive impact on the future of energy.
- Opportunities for continuous learning and training to grow throughout your career!
Pay: $40.82
The starting rate for this position in Ohio (US-OH) is $40.82 per hour. The total compensation package for this position may also include a full range of medical, retirement and/or other benefits. Details of participation in these benefit plans will be provided at such time the selected job candidate receives an offer of employment and are subject to a collective bargaining agreement.
As a federal government contractor, BWX Technologies, Inc. and any subsidiaries, affiliates and related entities (\"BWXT\" or the \"Company\") complies with all federal, state, and local laws and customer requirements regarding health and safety protocols. As such, all BWXT new hires will be required to adhere to applicable Company health and safety requirements within the workplace as a condition of employment.
BWXT is committed to the concept of Equal Employment Opportunity. We have established procedures to ensure that all personnel actions such as recruitment, compensation, career development, benefits, company-sponsored training and social recreational programs are administered without regard to race, color, religion, sex, national origin, citizenship, age, disability, protected veteran or other protected status.
All candidates must be U.S. citizens. Selected applicants are required to successfully complete a pre-employment check and drug screening. In addition, the position may require the ability to obtain and maintain applicable federal eligibility requirements for access to classified/sensitive information or matter which involves an extensive criminal and financial background investigation, drug test, previous employment, and reference verifications.
BWX Technologies, Inc. and its affiliates and subsidiaries (BWXT) is not responsible for and does not accept any liability for fees or other costs associated with resumes or candidates presented by recruiters or employment agencies, unless a binding, written recruitment agreement between BWXT and the recruiter or agency exists prior to the presentation of candidates or resumes to BWXT and includes the specific services, job openings, and fees to be paid (\"Agreement\"). BWXT may consider any candidate for whom a recruiter or agency has submitted an unsolicited resume and explicitly reserves the right to hire such candidate(s) without any financial obligation to the recruiter or agency unless an Agreement is in place prior to presentation and such Agreement explicitly encompasses the job opening for which such fees or costs are sought. An email, verbal or other informal contact with any person within BWXT will not create a binding agreement. Agencies or recruiters without an Agreement are directed not to contact any hiring managers of BWXT with recruiting inquiries or resumes. Recruiters and agencies interested in partnering with BWXT may contact BWXT's Talent Acquisition team at [email protected].
Job Segment: Nuclear, 2nd Shift, 3rd Shift, Inspector, Energy, Night, Aviation, Quality
Not Specified
Painter Spray A -Major Assemblies 03905
🏢 Boeing
Salary not disclosed
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Painter Spray A -Major Assemblies to join our Joint and Installation team in Everett and Renton, Washington.
As a Painter Spray A - Major Assemblies, you will be essential in ensuring the highest standards of quality and safety in the painting process for our aircraft. Your role will involve collaborating with team members to complete painting assignments while meticulously preparing surfaces to guarantee proper adhesion and finish. You will utilize various paint materials and techniques, including both spray and brush methods, to achieve flawless results that meet inspection requirements. Your attention to detail will be critical as you clean and service equipment, mask areas for painting, and coordinate with safety and environmental teams to ensure a compliant work environment. Additionally, you will operate automated spray equipment and curing ovens, monitoring conditions to maintain optimal performance throughout the painting process.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Collaborate with employees of varying classifications to ensure the completion of painting assignments for aircraft, missiles, or space vehicles.
Perform touch-up and pickup painting using both spray and brush techniques, adhering to inspection requirements.
Prepare surfaces to ensure proper adhesion, including corrosion removal and paint stripping as needed.
Prepare various paint materials, such as primers, enamels, and lacquers, according to specifications.
Clean and service spray guns, paint tanks, brushes, hoses, and related equipment after use.
Mask and unmask areas to facilitate corrosion removal or painting operations.
Set up all necessary equipment and supplies for painting operations, including fall protection and protective equipment.
Coordinate with safety, environmental, and fire organizations to ensure the shop is prepared for painting operations.
Operate automated spray equipment, such as robots, for preparation and painting tasks.
Operate curing ovens and monitor related equipment to ensure compliance with specifications, including temperature and humidity.
Monitor and maintain time-sensitive materials and processes throughout the painting operation.
Support customer inspections as required and screen work instructions to ensure proper workflow.
Apply decals, part markings, and wrap finished parts or assemblies as required.
Recognize and report any discrepancies or malfunctions in equipment or processes per established procedures.
Obtain and maintain necessary certifications and qualifications for the role, and perform established autonomous maintenance as needed.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration.
Basic Qualifications:
1+ years of experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.
1+ years of experience using various types of paint equipment and applicators, such as HVLP, pneumatic, electrostatic, and others.
1+ years of experience mixing paints.
1+ years experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications.
1+ years of experience handling chemicals and/or hazardous materials
Experience working from heights & using fall protection equipment with weight limitations.
Preferred Qualifications:
1+ year of experience performing aircraft or autobody painting and finishing operations.
Completed 1+ year of autobody paint/collision repair in high school or community and technology college academic program.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
This position offers relocation based on candidate eligibility.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: $25.32/hour, with potential to earn up to $54.76/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar. 31, 2026
Language Requirements
English Preferred
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
permanent
jobs by
✓ All jobs loaded