Citizens Jobs in Usa

• 
  
• Plan, write, and execute manual, CMM, and Vision System inspections
  
• Support internal customer requests for support related to inspection, measurement strategy, calibration, and other related requests.
  
• Identify nonconformances and collaborate with engineering and manufacturing teams to conduct root cause analysis and implement corrective actions
  

• 
  
• Document and record inspection results and properly file hard and electronic copies
  
• Interpret drawings and schematics.
  
• Initiate nonconformance reports (NCR's) for all nonconforming material.
  
• Perform inspections using the microscope.
  
• Perform first-article reports using various inspection tools.
  
• Follow customer specifications to satisfy the inspection requirements of the drawing or work order instructions
  
• Uphold the company core values
  
• Other duties as assigned
  

• 
  
• Must have the knowledge and experience necessary for the position.
  
• Must be able to follow instructions and procedures and work with minimal supervision.
  
• Must be capable of reading drawings and inspecting the work being performed.
  
• Strong understanding of GD&T.
  
• Manual and/or CMM inspection experience.
  
• Experience using Height Gauges, Micrometers, Calipers, and other inspection tools.
  
• Practical knowledge of Microsoft Office (Word, Excel, Outlook).
  
• Knowledge of Epicor ERP 10 or similar Management/Manufacturing Information System.
  

• 
  
• High school diploma or general education degree (GED)
  
• Minimum two years of experience with Calypso Software and Zeiss CMM; five years preferred
  

• 
  
• Is not a United States citizen
  
• Is not lawfully admitted for permanent residence in the U.S.
  
• Does not have politically protected status (embassy, refugee, or asylum)
  
• Has dual U.S. / foreign citizenship
  

• 
  
• Be responsible for quality product standards with no defects.
  
• Meet customer deadlines and expectations.
  
• Be responsible to comply with applicable elements of quality systems.
  
• Participate in cost reduction plans and continuous improvement plans/events, as required.
  
• Participate in audits.
  
• Acquire applicable skill/knowledge/certifications as required.
  
• Perform inspection of parts, does coating, labeling/boxing, and general preparation for shipment.
  
• Check parts for cracks, loose connections, faulty bonds, and faulty assembly.
  
• Record test results in testing log. Route products for rework or salvage of usable parts.
  
• Route reworked assemblies for testing. Clean completed assemblies. Assemble parts according to blueprint specifications.
  
• Test parts by connecting to test equipment setting controls, observing readings and actions of instrument checking for malfunctions.
  
• Set up and use equipment such as: Ragen Assembly, Component Lead Former, Drill Press, Denison Hydraulic Press, Component Lead tinning, and S.M.T. Re-flow.
  
• May fabricate instrument parts through crimping, staking, and cutting.
  
• Acquire applicable skill/knowledge/certifications as required.
  
• Once properly trained and/or certified- perform specific tasks including, but not limited to, welding, soldering, item test and inspection, filler, immersion testing.
  
• Maintain materials, equipment, and work area in a clean and orderly condition.
  
• Comply with all rules and regulations of Raytheon Technologies, including, but not limited to: Environmental Health and Safety,
  
• Complete assigned tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individual skills.
  
• Check work methods and results for conformance to standards and re-instruct as required.
  
• Report to lead or supervisor on work progress and updates including conditions surrounding failures to meet quality standards.
  
• Other duties as assigned.
  

• 
  
• Typically requires a HS Diploma or GED.
  
• U.S. Person (U.S. citizen, permanent resident, or granted refugee or asylee status) as defined here: We Prefer:
  
  • 
    
  • Manufacturing experience is strongly preferred
    
  • Career Readiness Certification (CRC) strongly preferred.
    
  • The ability to interpret schematics and/or technical drawings.
    
  • The ability to successfully complete training modules associated with job grade.
    
  • The ability to follow assembly instruction.
    
  • The ability to effectively work in an environment requiring repetitive job responsibilities.
    
  • The ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
    
  • The ability to understand end uses of products being built.
    
  • Strong written and verbal communication skills.
    
  • Attention to detail to ensure safety and quality.
    
  • Strong organizational skills and ability to multi-task.
    
  • The ability to work in a team to support work capacity in a fast-paced environment.
    
  • Intermediate computer skills in terms of typing, navigating screens and learning new software programs.
    
  • Demonstrated analytical skills and problem-solving abilities.
    
  • The ability to take direction from more experienced coworkers, leads and supervisors.
    
  
  What We Offer:
  1st shift schedule: Monday - Friday; 6:30am - 3:00pm
  Some of our competitive benefits package includes:
  
  • 
    
  • Medical, dental, and vision insurance
    
  • Three weeks of vacation for newly hired employees
    
  • Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option
    
  • Employee Scholar Program, tuition reimbursement program
    
  • Life insurance and disability coverage
    
  • Optional coverages you can buy: Pet Insurance, Home and Auto, additional life insurance, accident insurance, critical illness insurance, group legal
    
  • Ovia Health, fertility and family planning
    
  • Employee Assistance Plan, including up to 5 free counseling sessions
    
  • Incentives for a Healthy You
    
  • Bright Horizons, back-up child / elder care and college coach resources
    
  • Autism Benefit
    
  • Doctor on Demand, virtual doctor visits
    
  • Adoption Assistance
    
  • Teladoc Medical Experts, second opinion program
    
  • And more!
    
  
  Learn More and Apply Now!
  Collins Aerospace, a RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market.
  Avionics delivers advanced cockpit displays, vision systems, and comprehensive digital solutions for global government, commercial and business aviation customers. We provide connectivity and managed data services to ensure safety and seamless communication for passengers, crews, and militaries, from aircraft and airports to air traffic management. Join us in creating solutions that connect the world, one flight at a time. Start your application today.
  *Please ensure the role type (defined below) is appropriate for your needs before applying to this role.
  Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
  Regardless of your role type, collaboration and innovation are critical to our business and all employees will have access to digital tools so they can work with colleagues around the world - and access to Collins sites when their work requires in-person meetings.
  At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again.
  Apply now and be part of the team that's redefining aerospace, every day.
  The starting rate of pay for this role is $20.00/hour; however RTX considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate's work experience, location, education/training, and key skills.
  As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
  Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
  Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.
  This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.
  RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
  RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.
  Privacy Policy and Terms:
  Click on this link to read the Policy and Terms

Eaton's IS AER FMC division is currently seeking a Senior CNC Setup Machinist. The hourly rate for this position is $25 - $29 per hour. The hours for this shift are 7:00 am - 3:00 pm. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations.

Eaton Aerospace Group is currently seeking CNC Setup Machinists to join our 1st shift team. This position is based in our North Charleston, SC facility. Relocation assistance will be provided. The range for this role is $25-29 per hour. This position is currently offering a sign-on bonus of $3,000*; less applicable withholding.

Position Overview: The setup machinist will lead the transition/changeover between production runs on various CNC machines such as mills and lathes then operate select machines through the remainder of the production run while ensuring quality parts from the work cell.

Making what matters work at Eaton takes the passion of every employee around the world. We create an environment where creativity, invention and discovery become reality, each and every day. It's where bold, bright professionals like you can reach your full potentialand where you can help us reach ours.

In This Function You Will: Properly set tools in machine locations required for set-up & perform part changeover including program retrieval and input Establish work offsets (G54, G55, etc.) manually and utilizing probing technology Read, understand, and reset CNC machine program codes Be able to calculate and input axis coordinates for CNC machines up to 3 axis's or use spindle probe to determine work offsets Utilize Geometric Dimensioning and Tolerancing results to make adjustments to work offsets Additional benefits to include: Health insurance effective from first day of employment, air conditioned and well-maintained facility, paid lunch, two weeks of vacation upon hire. Eaton is invested in the learning and development of its employees, offering tuition assistance and capitalizing on new machining and measuring equipment.

Required (Basic) Qualifications: Must have a minimum of five (5) years' experience operating CNC lathes and/or mills in a manufacturing or operations environment or equivalent education Must have three (3) years' experience setting up CNC lathes and/or mills Candidates must be legally authorized to work in the United States without company sponsorship. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.

Preferred Qualifications: Technical degree in manufacturing, machining, or related field Journeyman's Toolmaker Certification Experience with CNC or conversational programming Experience operating a variety of manual machines (lathes, mills, jig bore, grinders etc.) Familiar with Kaizen, Lean Manufacturing techniques such as Value Stream Mapping, 5S, TPM, Error Proofing, Standardized Work, Set up Reduction, Continuous Flow, and Pull Experience in Troubleshooting Problems using quality tools such as statistics, 8D, 5 Why, Fishbone diagrams, etc. PC computer skills (Excel, Access, Word, Outlook, etc...) with ability to learn other programs Must be able to understand and interpret blueprints and sketches including proficiency in Geometric Dimensioning and Tolerancing (GD&T). Must be able to perform basic shop math. Must have demonstrated mechanical aptitude.

• 
  
• Review the work order requirements and drawings, obtain fixtures and tools for preparation.
  
• Set up and operate CNC or manual lathes/mills to perform a variety of machining operations, to trace complex profiles requiring changes in set-up, speeds, feeds and tool angles per engineering drawings to meet daily production requirements.
  
• Set up and operate manual lathes/mills to perform a variety of machining operations i.e. perform single point threading per engineering drawings to meet daily production requirements
  
• Edit programs, speeds and feeds.
  
• Use manual tools to debur and degrease.
  
• Set-up and/or operate various drill presses, punch press involving drilling, taping, reaming, countersinking.
  
• Use jigs and fixtures, block or shim parts to level and align the irregular shaped parts.
  
• Check for concentricity, formed sections, steps or shoulder to close +/- tolerances of 0.001\" or less for faulty operation or defective material.
  
• Improvise machine set-up to perform non-standard type of work.
  
• Train entry level machinist.
  
• Report any problems or difficulties to the supervisor.
  
• Maintain work area, equipment and supplies in a neat and orderly condition & 6S.
  
• Following safety procedures and policies.
  
• Perform other work-related duties as assigned.
  

• 
  
• 2~ 5 years of experience in machining
  
• Able to set up and operate CNC machine
  
• Understand of G codes and M codes
  
• Able to read drawings and blueprints, calculate or determine dimensions not given.
  
• Able to work independently.
  
• Able to use measuring equipment, including caliber, micrometers, checking gauge etc.
  
• Data input skills / computer skills.
  
• PLC knowledge of controller to be able to edit programs.
  
• Knowledge of operating manual secondary equipment, drill press, saw, punch press, etc.
  
• Able to operate lathes and/or mills
  
• Knowledge of turning, facing and boring to hold tolerances +/- 0.001.
  
• Lifting up to 50lbs
  
• EHS awareness
  
• Flexibility in shift times.
  
• Flexibility in working overtime.
  

• 
  
• HS Diploma/GED or equivalent
  
• Associate's / Technical Degree (two years) is preferred.
  

• US Citizen

• 
  
• You will install and fit parts on ships and locate positions of pieces by reference to water line, center lines, frame lines and other reference points.
  
• You will install packing, gaskets, liners and similar items where necessary.
  
• You will remove and repair or replace damaged parts of doors, hatches, and ship structures
  
• You will lay out shell, deck and bulkhead plates, I-beams, channel bar, angle bar, and other structural shapes, gun rings, struts, framing, and foundation structures and other parts from blueprints and mold loft templates.
  

• 
  
• Must be a US Citizen.
  
• Must be determined suitable for federal employment.
  
• Must participate in the direct deposit pay program.
  
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit
  
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  
• Males born after 12-31-59 must be registered for Selective Service.
  
• This may be a bargaining unit position.
  
• You may be required to successfully complete a pre-appointment physical examination.
  
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  
• A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.
  
• You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
  
• Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.
  
• This position may require exposure to high noise levels.
  
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  
• This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
  

**Description:**

You will be an Assembler for the Camden Operations team. Lockheed Martin Missiles and Fire (MFC) is a recognized designer, developer and manufacturer of precision engagement aerospace and defense systems for the U.S. and allied militaries. MFC develops, manufactures, and supports advanced combat, missile, rocket, manned and unmanned systems for military customers that include the U.S. Army, Navy, Air Force, Marine Corps, NASA and dozens of foreign allies.

Lockheed Martin's Camden Operations facility is a manufacturing, final assembly, test and storage operation for MFC programs.

**What You Will Be Doing**

As an Assembler, you will be responsible for helping create missiles, rockets and launchers that will protect our nation from its adversaries. Your responsibilities will include:

- Performing a variety of tasks ranging from repetitive to non-repetitive production assembly operations on mechanical assemblies and subassemblies including running automated equipment as well as applying touch up paint.

- Work from diagrams and drawings following detailed planning, and use hand and/or power tools, jigs and saws.

- Conduct quality inspections on processing lines in accordance with quality specifications.

- Disassemble, modify, rework, reassemble and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions

**Why Join Us**

We're looking for a detail-oriented and team-driven Assembler to join our Camden Operations team. As a key contributor to our defense systems, you'll have the opportunity to work on critical projects, develop your skills, and collaborate with a talented team. With a strong foundation in mechanical assembly and process flow, you'll be able to make a significant impact in this role. If you're passionate about working with your hands and contributing to the nation's defense, we encourage you to apply.

We are committed to supporting your work-life balance and overall well-being, offering flexible scheduling options Learn more about Lockheed Martin's comprehensive benefits package here.

**Further Information About This Opportunity:**

This position is in Camden. Discover more about our Camden, Arkansas location.

MUST BE A U.S. CITIZEN - This position is located at a facility that requires special access.

This full time position is eligible for Apprenticeship LMCO.

Want to learn more? Check out this testimonial video featuring some of our manufacturing team members: mfcprodopsICs

**Basic Qualifications:**

- High school diploma or GED equivalent.

- Must have the desire and/or ability to use hand tools (i.e. torque wrench, drills and inspection tools, riveting tools, screwdrivers, power screwdriver, ratchet wrench, nut runner, crimpers, cable tools and various other hand tools).

- Ability to read and interpret assembly drawings or instructions.

- This position will be located at a facility that requires special access and requires the selected candidate to be a US citizen.

- This job will require lifting of up to 30-50 pounds.

- Ability to work overtime including Fridays, Saturdays, and Sunday's, occasional holidays, or extended hours during the week when needed

**Desired Skills:**

- Operating automated equipment, understanding of mechanical assembly and process flow.

- Prior SAP Software experience is a plus (on the job training will be provided).

- Strong teaming ability and effective communication skills.

- Critical thinking and problem solving.

- Familiar with Microsoft Office products (Outlook) is a plus

**Clearance Level:** None

**Other Important Information You Should Know**

**Expression of Interest:** By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.

**Ability to Work Remotely:** Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.

**Work Schedules:** Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.

**Schedule for this Position:** 4x10 hour day, 3 days off per week

**Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.**

**The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.**

Join us at Lockheed Martin, where your mission is ours. Our customers tackle the hardest missions. Those that demand extraordinary amounts of courage, resilience and precision. They're dangerous. Critical. Sometimes they even provide an opportunity to change the world and save lives. Those are the missions we care about.

As a leading technology innovation company, Lockheed Martin's vast team works with partners around the world to bring proven performance to our customers' toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories.

**Experience Level:** Hourly/Non-Exempt

**Business Unit:** MISSILES AND FIRE CONTROL

**Relocation Available:** No

**Career Area:** Manufacturing

**Type:** Full-Time

**Shift:** Third

Job Location: Phoenix - 21552 - Phoenix, AZ

Position Type: Full Time

Salary Range: $24.70 - $24.75 Hourly

Job Shift: Any

Job Category: Field

Company Overview: Founded in 1973, Inter-Con Security Systems, Inc. is a leading US-owned security company, providing integrated security solutions to government and commercial customers on four continents. Inter-Con remains under family ownership and control and operates as the industry leader in the field of customized, high-requirement security solutions. Inter-Con employs over 25,000 security officer personnel world-wide, trained and managed by a team of professionals with unsurpassed military, law enforcement, and security experience.

Inter-Con is Everywhere Security Matters.

Why Work at Inter-Con? Passion: Inter-Con is a thriving company that is passionate about its products and people. Joining the Inter-Con family is an opportunity for growth and career advancement in an environment that truly cares for its employees. By joining the Inter-Con family, you're working with the best to build a safer future.

People: Inter-Con is more than a company, it's an alumni base. We believe in positioning the right people in the right place to help them achieve their long-term aspirations for career growth. We have transitioned thousands of security officers into successful careers in law enforcement, government services, foreign affairs and many more. Your career success drives our success.

Benefits: Inter-Con offers excellent full-time and part-time benefits that include: flexible scheduling to accommodate lifestyle commitments, vacation, sick leave, medical, dental, sponsorship for Top Secret Clearance, comprehensive training, discounts on higher education and much more.

Partner with us to begin a journey that begins with a commitment and leads to a career of a lifetime. Stand out. Be proud. Be Inter-Con!

Employment Opportunity

At Inter-Con we take pride in providing customized security solutions for our clients. As an Unarmed Security Officer, you will be part of a security team that supports critical facilities and infrastructure, public venues that requires an enhanced presence and asset protective services. This position an integral part of the broad spectrum of specialized security services Inter-Con provides its clients every day.

Specific benefits include:

• Competitive Pay
• Recognition and Reward Programs.
• Training and Career Development.
• Opportunities for Medical, dental, Holidays, vacation and sick, and 401 (k) retirement plan.
• Uniform and equipment provided
• Additional benefits vary depending on position.

Typical Duties:

• Provide unarmed security services on foot or by vehicle to perform customer service, fare inspection, and civil enforcement actions across the entire alignment.
• Lead interactions with the public and customers from a customer service approach while trained and prepared to adopt a security or civil enforcement posture.
• Identify and report security and safety violations.
• Inspect 20% of all fares system-wide each day.
• Monitor the system for the possibility of public disturbances.
• Issue civil citations for violations of transit-related ordinances and testify in court regarding those ordinances, if necessary.
• Assist in emergency situations, including, but not limited to, special events, crowd control, service interruptions, collisions, and fire or life safety incidents.
• Exercise the Agency's civil authority to enforce the removal of individuals who are trespassing on Agency property, with the assistance of local law enforcement when necessary.
• Notify law enforcement of any illegal activity, provide a documented account of all activity witnessed, and assist law enforcement as required.
• Take prompt action to address security incidents and, to the extent observed, accidents, fire, property damage, and safety hazards.

Qualifications:

U.S. citizen or authorization to work in the U.S.

21 years of age or older.

Valid Arizona State Driver's License, if in a position that requires driving.

Possess a valid security guard license.

Possess current First Aid and CPR certification cards and be familiar with an AED defibrillator.

Free of any job-related felony or major misdemeanor convictions, as determined in accordance with EEOC Enforcement Guidance 915.002.

Education and Experience:

High school graduate or equivalent.

One year experience as a security guard, member of the military, or police officer. Preferred security experience includes forward-facing customer engagement, de-escalation, crisis management, and professional communication. Three years of forward-facing customer service experience may be substituted for one year of the required security experience.

• Must be fully capable of performing the full range of security work requiring moderate to arduous physical exertion under either normal or emergency conditions. Must be able to stand and walk for the duration of shift hours.
• Exhibit good general health without physical defects or abnormalities which would interfere with the performance of duties under the contract.
• Must possess a good distance vision in each eye, correct to 20/30 on the Snellen chart. In addition to that, must possess normal fields of vision, good depth perception, close vision correctable to Jaeger #4 type test of both eyes, and ability to distinguish basic colors.
• Hearing loss must not exceed 30 decibels in both ears or 35 decibels in the poorer ear.

Veterans

Inter-Con is passionate about hiring veterans. In fact, we've hired thousands of veterans over the years and plan to keep hiring as many as we can. If you are veteran in search of a rewarding career among a team that holds an affinity for those who served as well as values your success and growth within our organization, please take a moment to review our website for all our extensive opportunities. Visit Security Systems, Inc. is an affirmative action employer who provides equal employment opportunities to minorities, females, veterans, and disabled individuals, as well as other protected groups. License PPO# 6822.

• 
  
• Follows standard work methods on recurring assignments but receives explicit instructions on unfamiliar assignments; technical adequacy of routine work is reviewed on completion; non routine work may also be reviewed in process.
  
• Following specific instructions, assembles or constructs simple or standard equipment or parts; may service or repair simple instruments or equipment.
  
• Conducts a variety of tests using established methods.
  
• Prepares test specimens, adjusts and operates equipment, and records test data, pointing out deviations resulting from equipment malfunction or observational errors.
  
• Extracts engineering data from various prescribed but non standardized sources; processes the data following well-defined methods including elementary algebra and geometry; presents the data in prescribed form.
  
• Other duties may be assigned to include overtime work to complete production requirements.
  

• 
  
• High School diploma and 4 years prior related experience.
  
• Demonstrated ability to read and interpret cable assembly drawings.
  
• Demonstrated ability to read and execute hydrostatic pressure tank procedures.
  
• Ability to obtain L3Harris certification to operate forklifts.
  
• Must be able to lift up to 35 pounds independently.
  
• Must be able to traverse ladders.
  

If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights.

NOW HIRING PVTA VAN DRIVERS - Secure Your Seat Today!

NEW starting Rate: $20.50/Hr. (NO CDL Required)

MV Transportation is hiring PVTA Paratransit Van Drivers for the Springfield, MA and Northampton, MA area. MV provides world class customer service to the members of our community through safe and reliable Paratransit services.

Be a hero in your community helping our most vulnerable citizens. We Provide Freedom!

Drivers Are:

As a professional Paratransit Van Driver, you will pick up, secure, transport and drop off riders. You will be responsible for safely operating a transit motor vehicle as well as providing reliable and efficient public transportation.

MV Offers:

• $20.50/hr. starting rate
• Guaranteed 40 hours a week with the potential of some overtime
• Paid training, Holidays and Vacation
• Full Benefits (Medical, Dental, Vision, 401k, Paid Time-off)
• Opportunity for growth and advancement within the company
• Immediate full-time and part-time positions available

Position Requirements:

• NO CDL Required!
• Must be at least 21 years of age
• Have a valid drivers license for a minimum of 3 years with a good driving record
• Strong Commitment to providing customer service
• Able to pass a Criminal Background Check, Drug Screen, and DOT physical
• Be flexible to work afternoons, weekends and Holidays

We can put you on the road to a great career helping others!

MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants.

Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment.

#appcast

The College of Southern Nevada appreciates your interest in employment at our growing institution. We want your application process to go smoothly and quickly. We ask that you keep in mind the following when completing your application:

* Once you start the application process you cannot save your work. Please ensure you have all required attachment(s) available to complete your application before you begin the process.

* Required attachments are listed below on the posting. Your application will not be considered without the required attachments.

* Please note that applications must be submitted prior to the close of the recruitment. Once a recruitment has closed, applications will no longer be accepted.

If you are unable to attach the required documents to your online application or need assistance regarding the application process, please contact the Talent Acquisition team within Human Resources via email at or call (7 to be directed to the appropriate Recruiter.

Job Description

This temporary Dental Assistants provide assistance to dentists in the general or specialized treatment of patients in both routine and emergency procedures in areas of diagnostic, preventive, restorative, periodontal, endodontic, pedodontics, orthodontic, oral surgery, and prosthodontic dental care.

Position Summary

* Assists in the provision of high-quality care within the scope of service consistent with accepted standards of care for dental assistants;

* Prepares each operatory and patient for treatment;

* Takes and prepares radiographs using conventional or digital technology;

* Provides active chairside assistance to the Dentist and anticipates the provider's needs;

* At the conclusion of patient care, assists the patient, clears the work site and prepares for the next patient;

* Monitors the flow of laboratory cases;

* Monitors and records sterilization cycles;

* Maintain and inventories supplies:

* Helps to manage the patient flow in clinic;

* Follows proper infection control protocols for the practice; and

* Participates in the ongoing evaluation of Dental Program Operations to assure the delivery of high-quality services that support the financial sustainability of the program.

Minimum Qualifications

* High School diploma or equivalent

* Dental Assisting School Graduate OR 1-year minimum experience.

Starting Salary

Hourly rate of $18.90

Please Note: Temporary hire 2-19.5 hour/week.

Exempt

No

Full-Time Equivalent

48.8%

Required Attachment(s)

To be considered for this position, please upload the following documents to your application:

* Resume

* Cover letter

* Copy of Academic Schedule

NSHE - INTERNAL APPLICANTS PLEASE NOTE

CSN employees or employees within the Nevada System of Higher Education (NSHE) MUST use the \"Browse Jobs\" process within Workday to find and apply for jobs at CSN and other NSHE Institutions. Once you log into Workday, type \"Browse Jobs\" in the search box which will navigate to the internal job posting site. Locate this specific job posting by typing the requisition number in the search box. If you complete an application outside of the internal application process and apply as an external candidate, your application will no longer be considered at the time of minimum qualification review. In order to prevent the disqualification of your application, you will need to reapply as an internal candidate before 11:59 pm the day prior to the position close date.

For more details on this position, please visit our website: My Career at CSN.

CSN is an Equal Employment Opportunity/Affirmative Action institution. For more information, visit Close Date

06/30/2026

Note to Applicant

Applicants should fully describe their qualifications and experience with specific reference to each of the minimum and preferred qualifications. The search committee will use this information during the initial review of application materials.

All document(s) must be received by 11:59 p.m. the day prior to the closing date posted on the job announcement.

This position may require that a criminal background check be conducted on the candidate(s) selected for hire.

As part of the hiring process, applicants for positions in the Nevada System of Higher Education may be required to demonstrate the ability to perform job-related tasks.

Schedules are subject to change based on organizational needs.

CSN is responsive to serving the educational needs of a diverse and ever-changing community. CSN employs only U.S. citizens and aliens authorized to work in the U.S. CSN does not sponsor aliens applying for faculty, professional staff, or management positions (H-1B Visas) in the absence of exceptional circumstances as defined by the USCIS.