Cheapest Flights Jobs in Usa

Berkel & Company Contractors, Inc. is looking for a Field Safety Specialist to work within our Atlanta Region. This position works with the Superintendent and Project Manager to administer, direct, and implement compliance with Berkel corporate safety policy and to ensure the achievement of company standard operating practices and safety planning goals. Our Field Safety Specialists are responsible for overall safety procedures on multiple project sites within their regional sectors.

Responsibilities:

• Create, communicate, enforce, and identify opportunities for improvements in Site Specific Safety Program
• Maintain all administrative tasks related to project specific safety binders and filing systems
• Coordinate, schedule, and facilitate all subcontractors pre-construction safety planning meetings, acting as a resource for field operations with compliance on federal (OSHA) and state as well as local safety and health regulations including NFPA and JCAHO standards
• Review all Site-Specific Safety Programs and Job Hazard Analysis prior to mobilization
• Conduct regularly scheduled site evaluations, follow up and tracking of corrections and deficiencies
• Periodically attend and monitor Tool Box Talks conducted by employees to assure documentation and quality
• Perform root cause and accident investigation techniques in the event of a job site accident – including collection of Berkel safety standard incident reporting forms and documentation working closely with our Risk Manager
• Active coordination with Risk Manager for identification of Claims trends and proactive risk management planning
• Enforce documentation from all staff on the proper training of their employees as related to their scope of work
• Conduct training for OSHA 10 or 30 Hour, HAZWOPER, and other Safety related topics

Job Requirements:

• 3 – 5 years of work experience in field of Construction Health and Safety Working knowledge of Federal and State safety and health regulations, as well as local building code issues for safety and health
• OSHA Outreach Trainer for the Construction Industry
• CHST preferred
• OSHA 500 preferred
• Knowledge of drilling operations and/or sheeting and shoring work preferred
• Demonstrated knowledge of construction best practices
• Demonstrated experience in leading, motivating, and coaching a large employee base
• Strong sense of urgency in completing documentation in a timely fashion
• Must be able to demonstrate incident/injury management skills
• Excellent oral and written communication and interpersonal skills
• Strong planning, problem solving, and troubleshooting skills
• Individual must be highly collaborative and demonstrate positive results in directing people
• Demonstrated ability to communicate effectively, both verbally and in writing to all levels of an organization
• Capacity to coordinate efforts involving staff from different departments and external partners
• Extensive travel. Travel demands may include, but are not limited to, traveling to various states for multiple projects (flights and driving), sitting in on a project as a full-time site safety supervisor, and traveling to other regions to assist other safety managers

EOE/Minorities/Females/Veterans/Disability (Compliant with the new VEVRAA and Section 503 rules)

Job Summary Geisinger is proud to offer a full time Flight RN a $8000 sign on bonus to eligible candidates! Marketing leading hiring rates and up to $7 shift differentials for evening, nights, and weekend shifts! Join the Geisinger Family! Apply now! To learn more about Geisinger opportunities, please contact Katy Baralt, Nurse Recruiter, at

Job Duties Provides nursing care to Life Flight.

Follows and adheres to Act 37 standards and protocols.

Accepts a duty assignment at any program site as deemed necessary by program leadership to maintain operations.

Provides nursing care from initial contact until patient care is relinquished to accepting medical facility.

Maintains thorough patient care documentation in the Electronic Medical Record.

Practices nursing within their scope of practice as defined by the state, BEMS (act 37) and Geisinger, maintains competency in knowledge and psychomotor skills by participating in ongoing laboratory and clinical experiences.

Communicates educational needs to the Life Flight clinical leadership team, Chief Flight Nurse, or Medical Director.

Maintains programs monthly continuing education requirements.

Remains knowledgeable in use and routine maintenance of all equipment and supplies used by Life Flight.

Maintains medical interior of Life Flight aircraft and ground ambulances.

Assures adequate inventory of equipment and supplies.

Assures a clean and orderly environment at assigned Life Flight base.

Functions as a flight crew member.

Assists the pilot when needed.

This includes attending pre-mission briefings and mission debriefings and completes necessary documentation.

Serves as a transport resource as applicable on specialty team transports.

These include ECMO and NICU.

Complies with safety standards to assure safety of self, medical crew members, patient, and equipment during all phases of flight.

Serves as a role model, teacher, and clinical resource to preferring hospital, EMS, and other health care professionals.

Acts as preceptor and participates in orientation of new employees and students as assigned Completes reports when applicable for all safety related incidents.

Participates in required patient safety education programs and other activities designed to improve departmental and organizational safety.

Provides input to the clinical management team for performance appraisals of care delivery team members.

Problem solves, troubleshoots and takes corrective measures in care and handling of equipment.

Works in a patient care environment in and around aircraft and is exposed to possible infectious diseases and chemical toxins.

Position may require sitting for long periods of time in a helicopter or in an office environment.

Ability to lift a minimum of 50 pounds.

Exposed to non-conventional motion, noise, vibration, jet fumes, and extreme temperatures.

Working conditions in or near aircraft and/or aircraft hangar environment on a daily basis and may be exposed to loud aircraft noise, fumes, gases, odors, dust particles, and mechanical and electrical hazards.

Travel may be required.

Employee may not exceed 250 lbs in weight in flight gear.

Accountable for satisfying all job specific obligations and complying with all organization policies and procedures.

The specific statements in this profile are not intended to be all-inclusive.

They represent typical elements considered necessary to successfully perform the job.

Additional competencies and skills outlined in any department-specific orientation will be considered essential to the performance of the job related to that position.

Position Details Schedule details: 12 hour rotating shifts (D/N) Weekend and holiday rotation Occasional travel required Required Certifications: One of the following specialty certifications required upon hire: CCRN- Critical Care Flight RN CEN Certified Emergency Nurse Specialization CFRN Certified Flight RN CTRN- Certified Transport RN Specialization CFRN required within one year of orientation.

Benefits of working at Geisinger: Full benefits (medical, dental and vision) starting on day one Three medical plan choices, including an expanded network for out-of-area employees and dependents Pre-tax savings plans with healthcare and dependent care flexible spending accounts (FSA) and a health savings account (HSA) Company-paid life insurance, short-term disability, and long-term disability coverage 401(k) plan that includes automatic Geisinger contributions Generous paid time off (PTO) plan that allows you to accrue time quickly Up to $5,000 in tuition reimbursement per calendar year MyHealth Rewards wellness program to improve your health while earning a financial incentive Family-friendly support including adoption and fertility assistance, parental leave pay, military leave pay and a free membership with discounted backup care for your loved ones Employee Assistance Program (EAP): Referrals for childcare, eldercare, & pet care; Access free legal guidance, mental health visits, work-life support, digital self-help tools and more Voluntary benefits including accident, critical illness, hospital indemnity insurance, identity theft protection, universal life and pet and legal insurance Shared governance structure that empowers our nurses Professional opportunities for growth and advancement Support and mentorship from a full range of dedicated nursing leaders Community involvement through our Employee Resource Groups Employee referral incentive program Education Graduate from Specialty Training Program-Nursing (Required) About Geisinger OUR PURPOSE & VALUES: Everything we do is about caring for our patients, our members, our students, our Geisinger family and our communities.

KINDNESS: We strive to treat everyone as we would hope to be treated ourselves.

EXCELLENCE: We treasure colleagues who humbly strive for excellence.

LEARNING: We share our knowledge with the best and brightest to better prepare the caregivers for tomorrow.

INNOVATION: We constantly seek new and better ways to care for our patients, our members, our community, and the nation.

SAFETY: We provide a safe environment for our patients and members and the Geisinger family We offer healthcare benefits for full time and part time positions from day one, including vision, dental and domestic partners.

Perhaps just as important, from senior management on down, we encourage an atmosphere of collaboration, cooperation and collegiality.

We know that a diverse workforce with unique experiences and backgrounds makes our team stronger.

Our patients, members and community come from a wide variety of backgrounds, and it takes a diverse workforce to make better health easier for all.

We are proud to be an affirmative action, equal opportunity employer and all qualified applicants will receive consideration for employment regardless to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or status as a protected veteran.

The Flight Test Maintenance Technician supports experimental aircraft programs by installing, troubleshooting, and repairing aircraft systems across multiple platforms. The role involves hands‑on work with flight controls, landing gear, hydraulics, pneumatics, fuel systems, and engines to ensure safe, reliable, and compliant aircraft performance throughout flight test operations. As part of a new aircraft certification program, the technician contributes to the development, integration, and validation of next‑generation systems that advance the aircraft toward regulatory approval and entry into service.

• Perform all aircraft maintenance as required to support mission readiness; inspect, test, adjust, and repair aircraft mechanical systems including flight controls, landing gear, hydraulics, pneumatics, fuel, and engines.
• Support aircraft repairs and modifications for experimental aircraft.
• Perform pre‑ and post‑flight inspections; remove and install engines; rig flight controls; remove, install, and rig landing gear; and carry out additional related maintenance duties.
• Test mechanical equipment under simulated or actual operating conditions to determine performance and airworthiness, using test equipment, such as hydraulic test stand, pressurization test stand, tension meters and bore scope etc.
• Adjust, replace, or repair defective components based on analysis of functional test results, following blueprints, schematics, handbooks, and other technical documents.
• Perform, document, and verify engineering changes, modifications, and updates; maintain accurate records for inspection and compliance.
• Collaborate with system engineers on design changes, modifications, and troubleshooting.
• Operate ground support equipment safely and support ground operations for flight‑test activities.
• Perform ground operation and line service for experimental operations.
• Maintain accurate records of all work performed in compliance with FAA and company standards.
• Maintain a clean, organized, and safe work environment; comply with FOD control, tool control, 5S, PPE, and all safety programs.

• High School Diploma or equivalent.
• Valid Driver’s License required.
• Applicable work experience minimum 3-5 years required.
• Hands‑on experience with aircraft repair or modification.
• Experience with experimental aircraft or R&D programs preferred.

• Ability to interpret technical drawings.
• Proficiency in mechanical, airframe, and powerplant systems including installation, repair, and fabrication.
• Strong interpersonal skills and sound judgment in aircraft repair and fabrication, effectively collaborating with engineers to address design and modification requirements.
• Effective collaboration with engineers, suppliers, and vendors; able to represent the company professionally.
• Must be able to read, write, speak, and understand the English language.
• Strong prioritization, problem‑solving, and teamwork skills.
• Ability to adapt quickly to changing schedules and operational needs.
• Willingness to travel and work overtime as required.

• Incumbents may be routinely exposed to equipment, operational noise, various weather conditions, and/or aircraft equipment, parts, or fuel odors.
• Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
• Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
• Read, hear, speak, and see with no restrictions, as required by job duties.
• Comprehend and adhere to management directions and/or safety instructions with no restrictions.
• Pull, push, carry, lift, or move items up to 50 lbs. throughout the work shift without assistance, as required by job duties.
• Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.
• Ability to work in confined spaces, heights up to 25’ and various environments as needed.

Senior Design Engineer responsible for the conceptual design and production engineering of Aircraft Flight Control Mechanical Systems. The candidate will be responsible for conceptual layout, detailed design, hands on aircraft production support, in-service design support for mechanical and electromechanical aspects of the aircraft flight control system. Candidate to have future capability of becoming a FAA DER.

1. Generate 3D Models and Drawings utilizing CATIA Version 5.
2. Perform trade studies for the mechanical systems team to identify optimal engineering solution.
3. Utilize drafting and Geometrical Dimensioning & Tolerancing (GD&T) knowledge to optimize part design for cost and functionality.
4. Perform clean sheet mechanical systems layouts.
5. Implement industry’s best engineering practices (design for manufacturing, design for reliability and design for maintainability).
6. Implement design solutions optimized for cost and weight.
7. Participate in design reviews with management, external and internal customers.
8. Perform kinematic studies and system performance analysis for mechanical and electromechanical mechanisms.
9. Perform mechanical system architecture development and verify through the use of modeling and simulation tools.
10. Review and analysis of flight test data.
11. Collaborate with the Integrated Product Team to resolve cross-functional issues.
12. Generate qualification test plans and reports.
13. Generate system test plans, perform testing, analyze results and prepare reports.
14. Manages task execution to ensure on-time and on-target completion.
15. Searches for problem root cause and develop corrective action plans and solutions.
16. Investigate and disposition production line build issues. Must have a working knowledge with Material Review Board processes.
17. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

1. Proficient in use of CATIA Version 5.
2. Proficient in use of Kinematic function within CATIA Version 5.
3. Advanced knowledge of drafting rules.
4. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
5. Proficient in Microsoft Office Products.
6. Functional knowledge of Team Center of similar Product Life Cycle tools.
7. Familiar with FAR Part 23 or Part 25.
8. Familiar with RTCA DO-160 Environmental Qualification Testing.
9. Familiar with Systems Engineering in accordance with ARP4754 and ARP4761.
10. Familiar with Rationale DOORS Requirements Management Software.
11. Functional knowledge of SAP.

1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
2. Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
4. Read, hear, speak, and see with no restrictions, as required by job duties.
5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
6. Effectively communicate in Business English language.
7. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
8. Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.

About the Company

The System Test and Evaluation Engineer is a critical role responsible for the end-to-end validation of the complex, multi-vendor Joint Simulation Environment (JSE). This individual will ensure the stability, performance, and operational readiness of the entire technology stack, from the physical hardware layer to the application services. The Test and Evaluation Engineer will not only execute tests but will be responsible for architecting the test strategy itself, developing all required documentation and artifacts from the ground up to create a repeatable, high-assurance validation process.

About the Role

The System Test and Evaluation Engineer is a critical role responsible for the end-to-end validation of the complex, multi-vendor Joint Simulation Environment (JSE). This individual will ensure the stability, performance, and operational readiness of the entire technology stack, from the physical hardware layer to the application services. The Test and Evaluation Engineer will not only execute tests but will be responsible for architecting the test strategy itself, developing all required documentation and artifacts from the ground up to create a repeatable, high-assurance validation process.

Responsibilities

• Test Architecture & Development: Author and maintain comprehensive, from-scratch system test plans, detailed test procedures, and execution checklists that cover the full scope of the JSE architecture.
• End-to-End Test Execution: Perform hands-on validation of the entire system, systematically verifying each architectural block to isolate faults and ensure proper integration.
• Systematic Validation:
• Physical Layer (Layer 0/1): Validate that all hardware components (servers, switches, storage arrays) power on correctly, pass their Power-On Self Tests (POST), and establish stable physical data links.
• Network Fabric (Layer 2/3): Verify that the network infrastructure functions as designed, including proper switch uplinks, VLAN segmentation, firewall policy enforcement, and the correct operation of network services like DHCP.
• Storage Subsystems: Test and validate the functionality of bulk storage arrays (e.g., Dell PowerStore, NetApp appliances) from both a back-end management and front-end data presentation (NFS/iSCSI) perspective.
• Operating Systems: Validate the correct installation, configuration, and security hardening of server operating systems, including Windows Server and Red Hat Enterprise Linux (RHEL 8/9).
• Virtualization & Compute: Confirm that stateful hypervisor systems are performing correctly. Validate the deployment and functionality of VMware vSphere environments. Test the ability of stateless, diskless compute systems to successfully pull OS images from network storage as advertised.
• Documentation & Reporting: Meticulously record all test outcomes, documenting deltas from expected results, and gathering all necessary log files and screenshots to serve as test artifacts.
• Stakeholder Communication: Translate complex technical findings, test results, and system behaviors into clear, concise, and understandable information for less technical decision-makers and stakeholders.

Qualifications

• Ability to obtain and maintain DoD TS/SCI and Active or must be eligible for SAP (Special Access Program) clearance.
• 5 years relevant experience with Bachelors in related field; 3 years relevant experience with Masters in related field; 0 years experience with PhD or Juris Doctorate in related field; or High School Diploma or equivalent and 9 years relevant experience.
• Experience: 5 years of experience in systems integration and testing.

Required Skills

• Demonstrated experience in testing complex, multi-vendor, integrated IT systems.
• Deep, hands-on knowledge across the entire technology stack, including:
• Operating Systems: Strong proficiency in the administration and testing of Windows Server and Red Hat Enterprise Linux (RHEL 8/9) environments.
• Virtualization Platforms: In-depth knowledge and hands-on experience with VMware vSphere, including ESXi, vCenter, vSAN, and virtual networking.
• Physical Layer Validation: Verifying system POST, hardware health (e.g., iDRAC/IPMI), and Layer 1 network connectivity.
• Network Infrastructure: Strong understanding of Layer 2 (VLANs, trunking) and Layer 3 (IP routing, firewall policies). Experience verifying network services like DHCP.
• Storage Systems: Experience with both SAN (iSCSI) and NAS (NFS) protocols. Familiarity with enterprise storage platforms is essential.
• Stateless & Network-Based Deployment: A firm grasp of PXE boot workflows, TFTP, and the processes for deploying diskless compute nodes.
• Proven ability to author high-quality technical documentation, including test plans and procedures, from scratch.
• Exceptional communication and presentation skills, with a verifiable ability to brief non-technical leadership on complex technical subjects.
• A self-starting, architectural mindset capable of independently analyzing a system, identifying test requirements, and executing a comprehensive validation strategy.

Preferred Skills

• Aviation background
• Engineering degree

Pay range and compensation package

Compensation: $55/hr to $57/hr. Exact compensation may vary based on several factors, including skills, experience, and education. Benefit packages for this role will start day 1 of employment and include medical, dental, and vision insurance, as well as HSA, FSA, and DCFSA account options, and 401k retirement account access with employer matching. Employees in this role are also entitled to paid sick leave and/or other paid time off as provided by applicable law.

Equal Opportunity Statement

We are committed to diversity and inclusivity.

Reports to: Chief Pilot 

FLSA Status: Full-time; Exempt 

Compensation: $110,000-$115,000 annually 

Location: BJC 

Company Description

Precision Aircraft Management is a leader in turnkey private aviation in the Rocky Mountains. We offer private aircraft management, charter operations, as well as aircraft sales and crewing solutions. We are dedicated to providing exceptional service and tailored aviation solutions to meet the unique needs of our clients. Based in Englewood, CO, at the Centennial Airport (APA) our team is committed to ensuring safe, efficient, and high-quality aviation experiences.

Role Description

We are seeking a highly skilled and safety-focused Pilot in Command (PIC) to operate flights under 14 CFR Part 135. The ideal candidate will demonstrate exceptional airmanship, professionalism, and a commitment to regulatory compliance and customer service. This role involves flying scheduled and on-demand charter flights, ensuring the highest standards of safety and operational excellence.

Responsibilities

• Serve as Pilot in Command on Part 135 operations, ensuring safe and efficient flight execution.
• Conduct thorough pre-flight planning, including weather analysis, route selection, fuel planning, and aircraft performance calculations.
• Perform pre-flight, in-flight, and post-flight duties in accordance with company SOPs and FAA regulations.
• Ensure compliance with FAA Part 135 regulations, company policies, and operational specifications.
• Maintain accurate flight logs, reports, and documentation.
• Communicate effectively with crew members, flight operations, maintenance personnel, and passengers.
• Maintain current required licenses and certificates in compliance with the company, ICAO (as applicable), and FAA requirements.
• Monitor and report any aircraft discrepancies or maintenance issues.
• Uphold the highest standards of customer service, professionalism, and discretion. 

Qualifications

• FAA License with ATP.
• Current First-Class Medical Certificate.
• Minimum flight time requirements:

Total Time: 3000 hours

PIC Time: 500 hours

Helicopter time: 1000 hours

• Strong knowledge of FAA regulations, airspace, and flight planning.
• Excellent decision-making, communication, and problem-solving skills.
• Ability to work a flexible schedule, including nights, weekends, and holidays.
• Must pass background check, drug screening in compliance with the DOT Drug & Alcohol Testing Program under 14 CFR Part 120 & 49 CFR Part 40, and company training.

Preferred Qualifications

·        Type rating in H125

·        Experience with flight instruction

·        Prior experience in charter, corporate, or air ambulance operations.

Benefits

• Competitive salary and flight hour compensation
• Health, dental and vision insurance
• Employer provided life insurance
• Accident insurance
• 401(k) with company match
• AAA Plus membership
• Paid time off, sick leave and holidays
• Training and career development opportunities