Changing Remote Battery Jobs in Usa
154 positions found — Page 13
- $35 Traveling to multiple locations (nationally) Travel expectation up to 75
- 80% Capstone Logistics is currently seeking Travel Maintenance Technicians.
This crucial role handles performing maintenance activities that ensure smooth and efficient operation for our partners in a material handling facility.
The work environment is fast paced, requiring routine interaction with other employees.
Ideal candidates must be available to work any of the shifts (1st, 2nd, or 3rd) in our 24/7 operation.
A strong electrical/mechanical background and the ability to pass an assessment are needed.
Responsibilities and Duties • Troubleshoot, adjust, and replace AC and DC electrical equipment, including batteries, control stations, fuses, motor starters, relays, switches, timers, servo-driven equipment, photoelectric devices, transducers, Variable Frequency Drives (VFDs), and encoders.
• Inspect, troubleshoot, repair, and replace mechanical components such as motors, reducers, drive chains, sprockets, sheaves, pulleys, rollers, conveyor belts, bearings, and transfer plates.
• Inspect, troubleshoot, repair, and replace pneumatic equipment, including diverters, lubricators, hoses, and coils.
• Inspect, troubleshoot, repair, and replace hydraulic equipment, including hoses, fittings, cylinders, and pumps.
• Weld equipment such as handrails, conveyor supports, package handling equipment, carts, and grating as defined by the scope of work.
• Perform preventive maintenance inspections on plant equipment, including conveyors, bulk carts, and power industrial equipment.
JOB SUMMARY: • This role handles the proper maintenance and repair of machinery.
SUPERVISORY RESPONSIBILITIES: • None ESSENTIAL FUNCTIONS: RESPONSIBILITIES: • Reassembling machines after the completion of repair or maintenance work • Start machines and see mechanical operation to determine efficiency and to detect problems.
• Inspect or test damaged machine parts and mark defective areas or advise supervisors or repair needs.
• Lubricate or apply adhesives or other materials to machines, machine parts, or other equipment, according to specified procedures.
• Install, replace, or change machine parts and attachments, according to production specifications.
• Dismantle machines and remove parts for repair, using hand tools, chain falls, jacks, cranes, or hoists.
• Record production, repair, and machine maintenance information.
• Read work orders and specifications to decide machines and equipment requiring repair or maintenance.
• Set up and run machines and adjust controls to regulate operations.
• Collaborate with other workers to repair or move machines, machine parts, or equipment.
• Inventory and requisition machine parts, equipment, and other supplies so that stock can be maintained and replenished.
• Transport machine parts, tools, equipment, and other material between work areas and storage, using cranes, hoists, or dollies.
• Collect and discard worn machine parts to maintain machinery and work areas.
• Clean machines and machine parts, using cleaning solvents, cloths, air guns, hoses, vacuums, or other equipment.
*PERFORMS ADDITIONAL RESPONSIBILITIES AS ASSIGNED
* QUALIFICATIONS: EDUCATION AND/OR EXPERIENCE: • Associate’s degree in maintenance or equivalent from two-year college or equivalent combination of education and experience.
Bachelor’s degree is preferred.
• Minimum 2 years’ experience of related experience KNOWLEDGE, SKILLS AND ABILITIES: • Strong organization skills • Excellent interpersonal and communication skills (written and verbal) • Demonstrated attention to detail.
• Demonstrated ability to solve mechanical problems.
• Strong working knowledge of Microsoft Office programs • Willingness to use a personal phone for work tasks, such as Microsoft Teams, email, pictures, and video.
• Knowledge of hand and power tools is needed.
PHYSICAL REQUIREMENTS: • Ability to lift and carry up to 81 pounds.
• Ability to work in a warehouse environment (concrete floors, changing temperatures) • Ability to wear Personal Protective Equipment (PPE) including eye and face protection and/or respirator.
#LI-LD1 #CB Capstone Logistics, LLC is part of The Transportation and Logistics industry which has been designated a "Critical Infrastructure Segment".
As a "critical infrastructure industry" worker in the Transportation and Logistics industry, associates are considered exempt from local restrictions such as curfews, shelter-in-place orders, and other mobility restrictions when reporting to, returning from, or performing his or her work functions.
** *Contract workers could be asked to relocate temporarily or permanently within a specific territory.
Keep this in mind when accepting an offer.
DRESS CODE & PPE: Steel Toe Boots are required.
Jeans (Long Pants) and T-Shirt (no inappropriate words or pictures) can be worn.
All other PPE is provided.
*If worker wears eyeglasses, side shields are required, Client does not provide side shields.
Some local travel may be required, Client Vehicles may be driven, MVR will be required for this position.
We are looking for candidates that have SAFETY in mind! Zero Harm is Client’s #1 Goal.
Ability to perform all duties listed below, following policies and safety procedures
- inventory control, receiving materials as well as moving material and operating equipment.
Motivated
- Dependable
- Team oriented
- Respectful
- Cooperative
- Flexible
- Adaptable
- Punctual Lifting/Standing and the ability to work in both indoor and outdoor environments and within all weather patterns
* Most Laydown yards are outdoor locations, and work is completed in both heat and inclement weather situations.
Heavy Equipment operation experience is preferred
* Construction Experience
* (can be trained on specific equipment but experience is helpful.) All Terrain Forklift
- ability to operate up to 16K pounds of Material.
Operate all different sizes of this equipment
*ability to operate 7K & 12K pounds of Material.
Materials are extremely heavy, can be awkwardly shaped and long.
Assist the Material Services organization by performing duties related to material accountability, operation of the storeroom and storage yards.
Essential Job Functions & Tasks: 1.
The following sets forth the principal duties required for the job that are normally to be performed.
It is not intended to limit the assignment of work or set the degree of supervision under all conditions.
An employee may perform miscellaneous, related and incidental work in addition to that outlined below.
These duties will be performed as an entry-level position under a training and learning process.
Individuals will be under direct and/or semi-direct supervision and will progress from assisting with these duties to performing them individually with semi-direct supervision and/or job guidance, based on accumulated job knowledge.
2.
Issue material under proper authorization; process and file required records which may include picking up, hauling and delivering materials and operating Company automotive equipment such as cars and trucks.
3.
Check received material for quantity; make visual inspection for identity, breakage,and condition; initiate and process material receipt and related records.
4.
Report irregularities and abnormal conditions 5.
Identify, sort and record material returned; place usable material in stock, and sort non-usable material into scrap containers; record applicable information and process related records 6.
Operate computer terminals and printers supporting a materials management system, and other office equipment such as calculators, scanners etc.
7.
Prepare and pack material for shipment or storage, including preparation of required shipping papers and other related records.
This may include shipping and receiving hazardous material, such as gasoline, oil, oil containing PCB, and lead-acid batteries under required safety and environmental procedures.
8.
Operate material handling equipment such as hand trucks, forklift trucks, low lift trucks, hoists, overhead cranes, order pickers, or any other equipment as required.
9.
Assist supervisor with maintaining efficient storage of materials, rearrangement or change of bins and racks, and making material location changes.
10.
Assist in maintaining adequate inventory levels based on current requirements through inventory cycle counts; perform discrepancy adjustments with appropriate approval and process all associated records.
11.
Assist employees of equal or higher classification.
12.
Perform similar or less skilled work.
13.
Perform duties in accordance with Company safety rules, operating regulations, and practice.
Basic Qualifications: Education requirements: High School Diploma or GED Work Experience: A minimum of one year work experience in inventory control and management, material handling, warehousing, or related experience is required.
Must possess basic computer skills to use inventory management software such as Maximo; Microsoft Excel and Word experience is also preferred.
Must have sufficient knowledge and skills to perform the duties and/or responsibilities listed above, and also have the physical capabilities to perform the required work.
Must possess a strong working knowledge of logistics related to shipping and relocating inventory.
Must understand and perform basic math functions.
Must be able to work independently and possess good communication skills.
Must be able to safely lift up to 70 pounds; successful completion of the Physical Ability Test (PAT) is required.
Must possess the appropriate State drive license.
If a Commercial Drive License (CDL) is required, the incumbent must obtain the CDL within six months of entry into this job classification or vacate the current job classification.
Must be able to operate material handling equipment including motorized forklifts and road vehicles.
ALL ROADS LEAD TO THIS OPPORTUNITY
The journey to Valvoline Instant Oil Change (VIOC) is different for everyone. Our employees are students, recent grads, parents, part-time workers, veterans, career changers—who have all found their way to our team. No matter where you’ve been or what you’re looking for, discover how your road leads to Valvoline.
ROLE OVERVIEW: What you’ll do to drive success
When you join us as a Vehicle Service Specialist, your personal and professional goals will be fueled by a friendly and collaborative team environment. Together, we’ll help keep our guests safe on the road by providing top-tier customer service, while performing preventative maintenance services for their vehicles.
Your road to VIOC doesn’t require previous automotive experience. Through our award-winning training program, we’ll teach you how to:
- Change oil
- Check and refill fluids
- Rotate tires
- Test and replace batteries
- Inspect and replace lights and wipers
- Perform an 18-point safety check
- And other preventive maintenance services
BENEFITS: What you’ll gain to fuel your goals
We’re committed to putting our people first in every way possible. That’s why we offer a variety of benefits* to help you navigate and advance a better future.
Here’s a look at some of our unique benefits:
Compensation:
- Compensation: $15.50 per hour weekly pay.
- Career Acceleration: Hands-on training for the potential to become a Service Center Manager within 18-24 months.
- Debt-Free Education: 13 paid credit hours/year at WilmU, covering part-time enrollment over two semesters.
- Life Balance: No late-night hours, holidays off, paid time-off availability, and back-up child and elder care.
- Health Benefits: Medical, dental, and vision, plus prescription drug coverage with Health Savings Account contributions.
- Employee Assistance Program (EAP): Quick, free, and confidential well-being support for all areas of life, including personal and work relationships, family, mental health, and legal issues.
- Employee Perks: Company-provided uniforms and tools, 50% discount on VIOC automotive services, and 401(k) savings plans with a 100% match up to 5%.
QUALIFICATIONS: What you’ll need to keep moving forward
From day one, you’ll get hands-on training and support to thrive as a Lube Technician. All you need to do is bring your positive attitude, attention to detail, and passion for learning—and we’ll help you every step of the way.
We seek team members with:
- Schedule flexibility (Weekend availability is likely, but we ensure you don’t work late nights or holidays)
- An eagerness to learn, a friendly attitude, and a desire to be part of a customer-focused team
- English fluency in reading, writing, and speaking
We expect you can:
- Stand for up to 8 hours, climb stairs, and occasionally lift up to 50 pounds
- Crouch, bend, twist, and work with your hands above your head
- Be comfortable working in a non-climate-controlled environment
Wherever you are, wherever you’re going, your future starts here. Because given the opportunity and support, we know everyone has something different, meaningful, and exciting to contribute. This is your chance to join a supportive team that’s willing to go the extra mile to help you succeed in your own way. So, bring your story, bring your goals, bring yourself—bring what drives you.
*Terms and conditions apply, and benefits may differ depending on location.
Valvoline is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.
The Company endeavors to make its recruitment process accessible to any and all users. Reasonable accommodations will be provided, upon request, to applicants with disabilities in order to facilitate equal opportunity throughout the recruitment and selection process. Please contact Human Resources at 1.833.VVV.Report or email to make a request for reasonable accommodation during any aspect of the recruitment and selection process. The contact information is for accommodation requests only; do not use this contact information to inquire about the status of applications.
Delta, founded in 1971, is a global leader in switching power supplies and thermal management products with a thriving portfolio of smart energy-saving systems and solutions in the fields of industrial automation, building automation, telecom power, data center infrastructure, EV charging, renewable energy, energy storage and display, to nurture the development of smart manufacturing and sustainable cities. As a world-class corporate citizen guided by its mission statement, “To provide innovative, clean and energy-efficient solutions for a better tomorrow,” Delta leverages its core competence in high-efficiency power electronics and its ESG-embedded business model to address key environmental issues, such as climate change. Delta serves customers through its sales offices, R&D centers and manufacturing facilities spread over close to 200 locations across five continents. Delta has 158 sales offices, 72 R&D centers and 48 manufacturing facilities worldwide.
Throughout its history, Delta has received various global awards and recognition for its business achievements, innovative technologies, and dedication to ESG. Since 2011, Delta has been listed on the DJSI World Index of Dow Jones Sustainability™ Indices for 11 consecutive years. In 2021, Delta was also recognized by CDP with leadership level ratings for its substantial contribution to climate change and water security issues and named Supplier Engagement Leader for its continuous development of a sustainable value chain.
Power Electronics R&D Engineer – EV Power
We are seeking a highly skilled and motivated R&D Engineer to join our team focused on developing cutting-edge on-board chargers for electric vehicles (EVs). The ideal candidate will have a deep understanding of various power conversion topologies, magnetics and wide band gap devices, with a strong background in both theoretical and practical aspects of power electronics.
Key Responsibilities:
- Design and develop innovative on-board charger solutions for EV applications.
- Research and implement power factor correction topologies, including both hard-switching and soft-switching techniques.
- Develop and optimize dual-active-bridge (DAB) and resonant DC-DC topologies.
- Work on single-stage AC-DC topologies, including resonant and DAB configurations
- Work on wireless power chargers for next generation autonomous charging fleet
- Work on Ultra-wide range DC-DC chargers and high step-down auxiliary battery charging applications
- Explore and implement new bidirectional devices like bi-GaN and bi-SiC in various applications such as Vienna rectifiers, Current Source Inverters (CSI), and single-stage isolated AC-DC converters.
- Collaborate with cross-functional teams overseas to ensure seamless integration of new technologies into existing and new products.
- Conduct simulations (Simplis, PLECS, ANSYS, Matlab/Simulink) and prototype testing to validate design concepts and ensure performance meets required specifications.
- Stay up-to-date with the latest advancements in power electronics and EV charging technologies.
- Prepare technical reports, presentations, and documentation to communicate findings and support product development.
Qualifications:
- Master’s or Ph.D. degree in Electrical Engineering, Power Electronics, or a related field.
- Proven experience in power electronics design and development, specifically in EV on-board chargers.
- Strong knowledge of power factor correction topologies (both hard-switching and soft-switching).
- Expertise in DAB and resonant DC-DC topologies, single stage AC-DC topologies, wireless power charging
- Knowledge of EMI noise source and propagation phenomenon, experience with EMI filter design
- Proficiency in working with wide band gap devices such as SiC and GaN.
- Familiarity with new bidirectional devices (bi-GaN and bi-SiC) and their applications.
- Hands-on experience with simulation tools such as MATLAB/Simulink, Simplis, PLECS, or similar.
- Excellent problem-solving skills and the ability to work independently and as part of a team.
- Strong communication skills, both written and verbal.
Preferred Qualifications:
- Experience in the automotive industry, particularly in EV charging systems.
- Knowledge of industry standards and regulations related to EV charging.
- Experience with hardware design and testing (6 kW, 11 kW, 22 kW), including PCB layout and thermal management.
What We Offer:
- Competitive salary and benefits package.
- Opportunity to work on cutting-edge technology in the rapidly growing EV industry.
- Collaborative and innovative work environment.
- Professional development and career advancement opportunities such as IP generation.
Equal Opportunity Employer:
We are an equal opportunity employer and value diversity in our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.
Are you a fit? Easy Apply now by clicking the "Apply" button
and sending us your resume.
Salary: $90,000 - $135,000 per year
A bit about us:
Our client is a leading provider of clean energy products including smart battery systems, inverters, power converters, and building energy management solutions. They combine the pace and energy of a tech startup with the resources of a fast-growing Fortune 1000 company.
We are seeking an experienced and adaptable Manufacturing Engineer to support our global product supply chain with engineering change management, technical drawing, 3D modeling, and communication with suppliers. The successful candidate will have experience with Solidworks, Product Lifecycle Management, sheet metal and plastics design for manufacturing, supplier quality evaluation, and contract manufacturing.
Why join us?
- Accelerated Career Growth!
- Competitive Base Salary and Bonus!
Job Details
Job Details:
We are seeking an experienced and dynamic individual to join our team as a Permanent Senior Weld Manufacturing Engineer. This position is an integral part of our manufacturing operations and offers a unique opportunity to be involved in a wide range of processes and technologies. The successful candidate will be responsible for developing, implementing, and improving welding processes and procedures to enhance product quality and productivity. This role requires a deep understanding of various welding techniques, including laser and robotic welding, and the ability to utilize CAD, AutoCAD, and SolidWorks software.
Responsibilities:
- Develop, implement, and improve welding processes and procedures to enhance product quality and productivity.
- Utilize CAD, AutoCAD, and SolidWorks to design and develop welding fixtures and tooling.
- Lead the implementation of New Product Introduction (NPI) processes for welding operations.
- Apply Lean Manufacturing principles to optimize welding processes and reduce waste.
- Collaborate with cross-functional teams to address and resolve manufacturing, quality, and reliability issues.
- Train and mentor junior engineers and technicians on welding techniques and procedures.
- Conduct root cause analysis of welding defects and implement corrective actions.
- Manage welding equipment maintenance and calibration to ensure optimal performance.
- Stay abreast of the latest advancements in welding technologies and industry best practices.
Qualifications:
- Bachelor's degree in Manufacturing Engineering, Mechanical Engineering, or a related field.
- Minimum of 5 years of experience in weld manufacturing engineering.
- Proven experience with CAD, AutoCAD, and SolidWorks.
- Excellent knowledge of laser and robotic welding techniques.
- Strong understanding of Lean Manufacturing principles.
- Experience with New Product Introduction (NPI) processes.
- Exceptional problem-solving and analytical skills.
- Excellent communication and leadership skills.
- Ability to work effectively in a fast-paced, team-oriented environment.
- Certified Welding Engineer (CWE) or Certified Welding Inspector (CWI) certification is a plus.
Interested in hearing more? Easy Apply now by clicking the "Apply" button.
Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: /privacy-policy
- Friday 7:00AM
- Finish Compensation: $16 / Hourly Buda, TX Monday
- Friday 7:00AM
- Finish $16 / Hourly Our Maintenance Workers are responsible for performing maintenance on building and warehouse equipment.
Requirements CMMS experience, must be comfortable using computer/tablet and email Capable of performing Preventative Maintenance Tasks, Troubleshooting and Documentation Must be comfortable working at heights, scissor lift and ladders Work weekends and overtime as needed Be on call after work hours as needed Valid driver's license Lift and carry a minimum of up to 25-75lbs, materials handled vary Prior warehouse and/or equipment experience is preferred but we are willing to train the right candidate All candidates should be over the age of 18 and will have to undergo a pre-employment drug test and background check Preferred Experience/Education 2-4 years of technical maintenance or related experience/training; or equivalent combination of education, experience and training Certified Material Handling Mechanic helpful On the job experience with electronics, hydraulics, and mechanical equipment Experience with industrial forklift batteries and chargers Experience performing various building repairs as needed, examples are but not limited too, doors and door hardware, floor drains, plumbing and drain cleaning, painting, etc.
Experience trouble shooting various MHE equipment, Fork Trucks, Pallet Jacks and Building Systems Comfortable working with electricity and understanding limitations 120/240/480 Familiar with welding and welding equipment Experience with HVAC systems, filter changes and basic troubleshooting (RTU's, Air Handlers and Liebert Units Demonstrate experience working on Loading Dock equipment, Garage doors, Dock Levelers, and Dock Locks Industrial Refrigeration experience, a plus Large Commercial Fire Suppression System experience, a plus Why you should work with us: Get paid weekly Benefits-after 60 days of employment Career growth, Over 500 Sites nationally Join our travel team, see the country, learn how all our sites operate Paid Training, Safety Incentives About the Company: Capstone is a North American supply chain solutions partner with more than 650 operating locations, 19,000 associates, and 60,000 carriers.
We have capabilities in freight management, warehouse and distribution center support, last-mile delivery, supply chain analytics, and optimization, and more.
Our integrated, end-to-end logistics solutions uniquely position us to help partners reduce warehousing and transportation costs.
#CB Capstone Logistics, LLC is part of The Transportation and Logistics industry which has been designated a "Critical Infrastructure Segment".
As a "critical infrastructure industry" worker in the Transportation and Logistics industry, associates are considered exempt from local restrictions such as curfews, shelter-in-place orders, and other mobility restrictions when reporting to, returning from, or performing his or her work functions.
Supervisory Responsibilities: This job has no direct supervisory responsibilities.
Essential Duties and Responsibilitiesinclude the following: Adheres to express lube guidelines.
Performs lube, oil and filter changes by draining and replacing oil and filter, and lubricating all joints, including idler arm steering knuckles, tie rods ends and ball joints.
Reports all necessary repairs to service advisor.
Installs completed LOF reminder sticker in vehicle.
Checks battery, tire air pressure, windshield fluid, transmission fluid and power steering fluid levels and refills as needed.
Checks coolant level and refills as necessary.
Ensures that vehicle is clean and free of fluid residue or fingerprints.
Checks fluid level prior to release of vehicle to ensure proper levels.
Maintains CSI at or above Company standards Maintains an organized, clean and safe work area Participates in required training Records all hours worked accurately in company timekeeping system Follows Safeguards rules and regulations.
Demonstrates the Company’s Core Values Complies with Company policies and procedures Observes all Federal, State, Local and Company safety rules and regulations in the performance of duties.
Other duties as assigned Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with medical conditions to perform the essential functions.
Desired Education: o GED √ High School Diploma o Associate Degree o Bachelor Degree o Master Degree o Doctorate Degree Field of Study/Work Experience: o Accounting √ Automotive o Business o Human Resources o Information Technology Desired Work Experience: √ up to 3 years o 3-5 years o 5+ years Education/Experience: Basic knowledge of automotive parts and systems.
Demonstrable mechanical skills and knowledge.
Technical training or commensurate technical experience.
Certificates and Licenses: √ Valid Driver’s License o Automobile Salesperson License Computer Skills: Basic Computer skills to utilize timekeeping system.
Communication Skills: Ability to understand and follow instructions.
Ability to communicate effectively with customers and company personnel.
Attendance Expectations: The position requires regular and predictable attendance.
Scheduled shifts may include evening hours, weekends, and holidays.
Physical Demands: Must be able to lift up to (50) pounds.
While performing the duties of this job, the employee is regularly required to talk and hear; stand; walk; use hands to finger, handle, or feel; reach with hands and arms and stoop, kneel, crouch, or crawl.
Environment Demands: Duties are performed primarily in the service area.
Work includes movement around vehicles, working in various physical positions, and the safe operation of power tools and test equipment.
May be exposed to loud noise, vibration, exhaust fumes, and other service and repair conditions.
Frequently interacts with service advisors and the service manager.
Verbal and Writing Ability: Ability to read and comprehend instructions, correspondence, and memos.
Ability to effectively present information in one-on-one and small group situations to customers and other employees.
Math Ability: Ability to add, subtract, multiply and divide.
Reasoning Ability: Ability to apply common sense understanding to carry out instructions.
Ability to deal with standardized situations.
Ability to understand and follow technical manuals.
Core Values: To perform the job successfully, an individual should demonstrate the following Core Values: Servant Leadership Servant Leaders consciously put the needs of others before their own, because to serve people is to value them.
Teamwork through Trust & Respect Diversity is strength, and when we trust and respect one another we can work as a team to achieve at a high level.
Integrity Being honest and transparent with people, in an effort to do the right thing within the letter and spirit of the law, drives every action we take and every decision we make.
Commitment to Customer Enthusiasm Every day we recommit ourselves to the customer experience, and we are empowered to exceed the expectations of our customers.
Passion for Winning Hendrick’s tradition of winning is based on the idea of striving to be the best, not the biggest, and is therefore defined by how we treat our people.
Accountability at All Levels Taking ownership of our actions and our decisions allows us to grow as individuals, and support each other as a team.
Commitment to Continuous Improvement Every day we soften our hearts as well as our egos, in order to seek out and improve upon areas of opportunity within ourselves and our team.
This job description in no way states or implies that these are the only duties and responsibilities to be performed by this employee.
The employee will be required to follow any other instructions and to perform any other duties and responsibilities upon the request of a supervisor.
This job description is subject to revision at the discretion of the company.
Hendrick is an Equal Opportunity employer.
Minorities, women, veterans, and individuals with disabilities are encouraged to apply.
For more information regarding the EEOC, please visit .
Job Title : Bomb Technician (EOD) Category / Component : Enlisted • Active Overview Explosive Ordnance Disposal Technicians locate, identify, render safe, and dispose of explosive threats on land, at sea, and underwater, using advanced robotics, diving, and explosives skills to protect forces and civilians and support fleet and joint operations worldwide.
Key Responsibilities Detonate and demolish hazardous munitions, pyrotechnics, and outdated explosives; neutralize ordnance including sea mines, torpedoes, depth charges, and improvised explosive devices; remotely disable unsafe ordnance using robotic and diagnostic technology; conduct parachute and helicopter insertion operations; clear waterways of mines in support of ships and submarines; provide explosive ordnance support to law enforcement agencies and organizations such as the United States Secret Service and Department of State.
What to Expect Global missions in every environment, from parachuting into remote terrain to arriving by small boat on foreign shores; majority of time spent in the field conducting high risk, time critical tasks with strict safety and risk management; regular integration with Special Operations, fleet units, and interagency partners; intense physical and mental demands with a culture that values precision, calm decision making, and discipline.
Work Environment Operate worldwide on land, at sea, and underwater from EOD Mobile Units and detachments; insert via parachute, helicopter, and small boats; work from ships, shore commands, and forward locations; serve in small team based units that balance training, readiness, and operational tasking with limited administrative overhead compared to field work.
Pathways, Training & Advancement Recruit Training followed by an EOD preparatory course at Great Lakes, Illinois, that builds swimming, conditioning, small boat skills, and risk management fundamentals; EOD Assessment and Selection Course that evaluates aquatic adaptability, running, swimming, academics, professionalism, and teamwork; Navy diver training at the Naval Diving and Salvage Training Center; Naval School Explosive Ordnance Disposal, which covers demolition, conventional ordnance, underwater mines, missiles, landmines, and chemical, biological, radiological, and nuclear threats; Basic Parachute Training and ongoing advanced training and qualifications throughout a career.
Apply for the Navy Warrior Challenge contract for EOD during initial enlistment, then pass the EOD Physical Screening Test and diver medical screening; complete required assessments and receive recommendation and screening from an EOD officer or senior enlisted EOD technician; additional in service accession requirements may include minimum time on board, performance standards, and command endorsement.
Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.
Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.
Additional qualifications for this job may include: Eyesight correctable within EOD diving standards, with no color blindness; qualifying ASVAB scores using combinations such as arithmetic reasoning and verbal expression or general science, mechanical comprehension, and electronics information; age typically 30 or younger at accession; United States citizenship and eligibility for a security clearance; excellent physical condition and swimming ability, with the capacity to perform detailed technical tasks under stress and in hazardous environments.
Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.
Specific options depend on the Sailor's status, training, and current Navy policy.
Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.
Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.
Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.
Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.
Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.
It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.
Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.
Job Title : Bomb Technician (EOD) Category / Component : Enlisted • Active Overview Explosive Ordnance Disposal Technicians locate, identify, render safe, and dispose of explosive threats on land, at sea, and underwater, using advanced robotics, diving, and explosives skills to protect forces and civilians and support fleet and joint operations worldwide.
Key Responsibilities Detonate and demolish hazardous munitions, pyrotechnics, and outdated explosives; neutralize ordnance including sea mines, torpedoes, depth charges, and improvised explosive devices; remotely disable unsafe ordnance using robotic and diagnostic technology; conduct parachute and helicopter insertion operations; clear waterways of mines in support of ships and submarines; provide explosive ordnance support to law enforcement agencies and organizations such as the United States Secret Service and Department of State.
What to Expect Global missions in every environment, from parachuting into remote terrain to arriving by small boat on foreign shores; majority of time spent in the field conducting high risk, time critical tasks with strict safety and risk management; regular integration with Special Operations, fleet units, and interagency partners; intense physical and mental demands with a culture that values precision, calm decision making, and discipline.
Work Environment Operate worldwide on land, at sea, and underwater from EOD Mobile Units and detachments; insert via parachute, helicopter, and small boats; work from ships, shore commands, and forward locations; serve in small team based units that balance training, readiness, and operational tasking with limited administrative overhead compared to field work.
Pathways, Training & Advancement Recruit Training followed by an EOD preparatory course at Great Lakes, Illinois, that builds swimming, conditioning, small boat skills, and risk management fundamentals; EOD Assessment and Selection Course that evaluates aquatic adaptability, running, swimming, academics, professionalism, and teamwork; Navy diver training at the Naval Diving and Salvage Training Center; Naval School Explosive Ordnance Disposal, which covers demolition, conventional ordnance, underwater mines, missiles, landmines, and chemical, biological, radiological, and nuclear threats; Basic Parachute Training and ongoing advanced training and qualifications throughout a career.
Apply for the Navy Warrior Challenge contract for EOD during initial enlistment, then pass the EOD Physical Screening Test and diver medical screening; complete required assessments and receive recommendation and screening from an EOD officer or senior enlisted EOD technician; additional in service accession requirements may include minimum time on board, performance standards, and command endorsement.
Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.
Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.
Additional qualifications for this job may include: Eyesight correctable within EOD diving standards, with no color blindness; qualifying ASVAB scores using combinations such as arithmetic reasoning and verbal expression or general science, mechanical comprehension, and electronics information; age typically 30 or younger at accession; United States citizenship and eligibility for a security clearance; excellent physical condition and swimming ability, with the capacity to perform detailed technical tasks under stress and in hazardous environments.
Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.
Specific options depend on the Sailor's status, training, and current Navy policy.
Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.
Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.
Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.
Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.
Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.
It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.
Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.
H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans' status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team.
Pre-employment drug testing (EOE)
Great Benefits offered!
2nd Shift Diesel Mechanic
US-PA-Bernville
Job ID: 2025-2569
Type: Regular Full-Time
Category: Maintenance
Landis C. Deck & Sons Division
Overview
Landis C. Deck & Sons, a division of the H&K Group, Inc., is looking for 2nd shift diesel mechanics. This self-motivated, organized, competent, and professional individual repairs and maintains electric, diesel, and gasoline vocational trucks.
Why work for H&K Group, Inc.?
- Competitive salary commensurate with experience
- 100% Company-paid Health Benefits
- 401(k) Savings and Investment Plan
- Tuition reimbursement programs available to qualifying employees for approved programs
- Additional training programs including on the job, online through H&K Academy, manufacturer offered training, and more
Responsibilities
Essential Duties and Responsibilities
- Perform all work adhering to OSHA and H&K Safety policies
- Reads job order and observes and listens to truck or equipment in operation to determine malfunction and to plan work procedures.
- Installs new ignition systems, aligns front wheels, changes, or recharges batteries, and replaces transmissions and other parts.
- Replaces gas or diesel engines.
- Examines protective guards, loose bolts, and specified safety devices on trucks and equipment, and adjusts.
- Lubricates and services vehicles
- Fabricates special lifting or towing attachments, hydraulic systems, shields, or other devices according to schematic drawings.
- Collision repair, sand, prep, and paint
- Completes all standard maintenance on trucks and equipment and ensures state inspection requirements are met for cars, trucks, and trailers
- Other duties as assigned
Qualifications
Required Skills, Education, and Experience
- One-year certificate from an accredited college or technical school in diesel mechanics or a related field OR 2 years of related experience and/or training
- Equivalent combinations of education and experience may be considered
- Class A or B CDL or ability to obtain within one year
- Clean driving record
- Customer Service and Teamwork
- Mathematical Skills
- Compute rate, ratio, percent
- Draw and interpret bar graphs
- Willing and able to work a 2nd- or 3rd-shift schedule
- Ability to fit test & utilize appropriate PPE as needed
- Ability to meet physical requirements (movement, lifting, as relevant to job)
Preferred Skills, Education, and Experience
- 4 years of related experience and/or training
- State Inspection license
- Experience working in heavy civil construction, road construction, or quarries
- OSHA, MSHA, or other relevant safety certifications
Physical Demands
- Occasionally stand, walk, sit, talk, hear, climb, balance, and crawl
- Frequently stoop, crouch, kneel, and use hands to finger, feel, and grasp
- Occasionally lift and/or move up to 75 pounds
Work Environment
- Noise level is loud at times
- At times required to work outdoors in all environments
- Hours regularly exceed 40 in a week and 8 in a day
The H&K Group, Inc. provides complete heavy civil contracting and construction materials solutions with safety, speed, quality, efficiency, and value. Beginning as a small family business a half century ago, we are now a dynamic group of vertically integrated companies that has been growing and prospering for over 50 years.
Thank you for your interest in employment with H&K Group, Inc. At H&K, we invest in our people, providing the essential training, instruction, and supervisory support that they need to develop and grow within our company. We acknowledge that H&K’s strength and success is directly related to our employees and the talents, dedication, and job performance they exemplify. We seek dynamic, motivated people who are driven to make a difference.
H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans’ status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team.
Pre-employment drug testing (EOE)
Pre-employment Physical
100% Company-Paid Health Benefits!
PI98b26ba97387-37344-36539407
