Calibration Jobs in Usa

Job Description

Driver will be doing data collection and mapping while covering the following areas of Denver-Aurora-Lakewood

• Safely operate company-provided vehicles on public roads

• Drive assigned routes for data collection and mapping

• Monitor in-vehicle systems during data collection

• Perform daily vehicle inspections before driving

• Follow defined driving and data collection procedures

• Perform basic system checks and calibrations as trained

• Coordinate daily with operations teams on routes and schedules

• Ensure collected data is transferred according to instructions

• Assist with basic technical equipment setup and troubleshooting

• Document and report issues clearly and promptly

Additional Skills & Qualifications

• Valid U.S. Driver’s License

• Clean driving record; background check and MVR required

• Field Services or Data Collection experience

• Ability to drive 6–8 hours per day

• Reliable, punctual, and comfortable working independently

• Willingness to follow procedures consistently

• Basic computer and technical skills

• Strong communication skills

• Willingness to learn new tools and processes

This is a Contract position based out of Denver, CO.

The pay range for this position is $30.00 - $30.00/hr.

Eligibility requirements apply to some benefits and may depend on your job
classification and length of employment. Benefits are subject to change and may be
subject to specific elections, plan, or program terms. If eligible, the benefits
available for this temporary role may include the following:

• Medical, dental & vision
• Critical Illness, Accident, and Hospital
• 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
• Life Insurance (Voluntary Life & AD&D for the employee and dependents)
• Short and long-term disability
• Health Spending Account (HSA)
• Transportation benefits
• Employee Assistance Program
• Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type

This is a fully onsite position in Denver,CO.

This position is anticipated to close on Mar 20, 2026.

Were partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. Thats the power of true partnership. TEKsystems is an Allegis Group company.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

We’re a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We’re a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We’re strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We’re building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at .

The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

• 
  
• Plan, write, and execute manual, CMM, and Vision System inspections
  
• Support internal customer requests for support related to inspection, measurement strategy, calibration, and other related requests.
  
• Identify nonconformances and collaborate with engineering and manufacturing teams to conduct root cause analysis and implement corrective actions
  

• 
  
• Document and record inspection results and properly file hard and electronic copies
  
• Interpret drawings and schematics.
  
• Initiate nonconformance reports (NCR's) for all nonconforming material.
  
• Perform inspections using the microscope.
  
• Perform first-article reports using various inspection tools.
  
• Follow customer specifications to satisfy the inspection requirements of the drawing or work order instructions
  
• Uphold the company core values
  
• Other duties as assigned
  

• 
  
• Must have the knowledge and experience necessary for the position.
  
• Must be able to follow instructions and procedures and work with minimal supervision.
  
• Must be capable of reading drawings and inspecting the work being performed.
  
• Strong understanding of GD&T.
  
• Manual and/or CMM inspection experience.
  
• Experience using Height Gauges, Micrometers, Calipers, and other inspection tools.
  
• Practical knowledge of Microsoft Office (Word, Excel, Outlook).
  
• Knowledge of Epicor ERP 10 or similar Management/Manufacturing Information System.
  

• 
  
• High school diploma or general education degree (GED)
  
• Minimum two years of experience with Calypso Software and Zeiss CMM; five years preferred
  

• 
  
• Is not a United States citizen
  
• Is not lawfully admitted for permanent residence in the U.S.
  
• Does not have politically protected status (embassy, refugee, or asylum)
  
• Has dual U.S. / foreign citizenship
  

DOD SkillBridge Medical Equipment Technician Internship

Thank you for your service in the military! Join Agiliti and make a difference in your new career as a Medical Equipment Technician or Biomedical Equipment Technician. Our internships are for all technician levels!

Agiliti is a nationwide company of passionate medical equipment management experts who believe every interaction has the power to change a life. Our industry-leading commitment to quality and team of expert technicians helps ensure clinicians have access to patient-ready equipment needed for patient care. Make an impact in healthcare and grow your career with Team Agiliti!

DOD SkillBridge Technician Program

Agiliti has created a 4-6 month SkillBridge program for transitioning service members to meet our specific workforce needs. We have successfully matched those needs to the skills and abilities of highly motivated service members. The Medical Equipment Technician works under the guidance of a qualified Biomedical Equipment Technician or supervisor.

Key Skills

* Electronics

* General maintenance

* Mechanical maintenance

Training Plan

* Participate in an individualized training plan that meets the soldiers needs and the work at the Agiliti location

* Training is conducted via a mixture of CBT (computer-based training), OJT (on the job) and classroom learning

* Interns will receive extensive opportunity for hands on experience and will participate in Agiliti's competency verification program

* Interns will be assigned a mentor at their location

Benefits of our SkillBridge program

* TRAINING: Both internal Agiliti and potential for formal Original Equipment Manufacturer

* Wide range of positions and career paths available

* Nationwide: Over 90 locations for relocation

* Hands-on experience in the medical field

* Highly sought-after skills

* Meaningful work: Support hospitals including many DOD facilities

* 25% of open positions are filled with internal talent through promotions

What Will You Do in This Role

* Provide cost-effective equipment inspection, maintenance, calibration, and repair service on a variety of medical devices

* Complete all paperwork and computer data entry accurately and promptly to ensure complete documentation for billing and required regulatory compliance.

* Communicate with clinical staff on the topics of equipment features, functionality, etc.

What You Will Need for This Role

* High school diploma or equivalent required.

* Must hold a current, valid, and unrestricted driver's license. Must have a safe driving record based on Agiliti policies.

* Basic computer skills; understanding of computer networks and equipment interfacing.

* Willing to work flexible hours, including evenings, weekends, and holidays, as well as emergency off-hours as required to support a 24/7 schedule.

* Willing to travel periodically to support business needs.

* Able to lift and/or push up to 75 pounds.

* Able to stand and walk for extended periods of time.

* Able to frequently bend, stoop, twist, climb, crouch/squat, kneel/crawl, sit, and stand for long periods of time.

Permanent employees also enjoy

* Tuition assistance

* 401k

* Health benefits

* Continued technical training

It is the policy of Agiliti to provide equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender identity, sex, sexual orientation, national origin, age, physical or mental disability, genetic information, marital status, status as a veteran, military service, or any other characteristic protected by applicable federal, state, or local civil rights laws. In addition, Agiliti will provide reasonable accommodations for qualified individuals with disabilities. Agiliti strictly prohibits any form of retaliation against individuals who make good faith reports of alleged violations of this policy or who cooperate in Agiliti's investigation of such reports. Affirmative Action Policy Statements

You may be required to obtain certain vaccinations, or provide proof of current vaccination status, based on customer and/or company requirements. If vaccination is required, Agiliti will provide specific directions and cover the expense at a participating clinic. Please note, this includes the COVID-19 vaccination.

Agiliti offers a robust suite of benefits for regular, full-time, non-union employees including: health insurance options for Medical, Dental & Vision plans, Short- and Long-Term Disability plans, Flexible Spending Accounts, Health Savings Accounts, Life Insurance Options, Paid Time Off, 401K Saving Plan with employer match, Employee Discounts, Tuition Reimbursement, Daily Pay program, Employee Assistance Program, and wellness programs.

Agiliti is an equal opportunity employer and provides reasonable accommodations to employees and applicants consistent with state and federal law.

If you require assistance with your application, please contact .

Primary Job Location:

Chicago District

Additional Locations (if applicable):

Albuquerque District, Albuquerque District, Atlanta District/COE, Atlanta Service Center, Baltimore District, Birmingham District, Boston District, Burbank District, Charlotte District, Cincinnati District, Cleveland District, Columbus District, Dallas District, Denver District, Detroit District, El Paso District, Fargo District, Ft. Lauderdale FL Branch (inactive), Fullerton District/COE, Green Bay District, Harrisburg District, Houston District, Indianapolis District, Iowa City District, Jacksonville District {+ 30 more}

Job Title:

Medical Equipment Technician I

Company:

Agiliti

Location City:

Downers Grove

Location State:

Illinois

Pay Range for All Locations Listed:

$15.15 - $38.43

This range represents the low and high ends of the Agiliti pay range for this position. This base pay range information is based on the market locations shown. The actual pay offered may vary depending on several factors including geographic location, experience, job-related knowledge, skills, and related factors. Dependent on the position offered, short-term and/or long-term incentives may be provided as part of the compensation. Applicants should apply via Agiliti's internal or external career site.

• Thorough understanding of manufacturing and manufacturing processes.
• Ability to read and understand sketches, blueprints.
• Understanding and ability to layout parts
• Thorough understanding of tools and fixturing.
• Strong math skills.
• Ability to work well with a team while also working independently.
• Detailed oriented and ability to organize and prioritize.
• Good written and verbal communication skills.

• Previous manual grinding experience or equivalent education.
• Prior CNC experience a plus.

• Receives and reviews drawings, programs, sketches.
• Constructs and loads CNC programs as necessary. Performs all required paperwork.
• Edit/modify programs as necessary to meet customer specifications.
• Assure Marposs gauging, and MIDA probing is correctly engaged and calibrated appropriately.
• Measure, inspect, and make required adjustments to achieve correct product dimensions.
• Loads and unloads machine with aid of an overhead crane.
• Selects proper tooling, etc., sets indexing, determines base line, etc.
• Changes grinding wheel as necessary, indexes or replaces tooling as necessary.
• Checks identification on all materials handled by stamping or marking order, heat and

• Layout product as necessary.
• De-burr parts and move to the next workstation.
• Lubricates machine, checks filtration system, checks coolant levels, checks and fills reservoirs, etc.,
• Performs minor maintenance as necessary and maintains working area in a clean, orderly and safe condition.
• Reports defective material and faulty equipment to supervisor immediately.
• Observes all safety rules and regulations.

• Perform other duties as deemed necessary.

• 
  
• Interprets purchase orders, work instructions, engineering drawings, specifications, and standards to ensure accurate inspection
  
  
• Performs inspections of materials, components, and finished products using standard measuring equipment at various stages of the production process
  
  
• Provide detailed in-process inspections on components, using detailed drawings, CAD models, and established processes to verify conformance to design requirements.
  
  
• Routinely observe technical operations and offer guidance and/or serve as an additional technical resource
  
  
• Uses calibrated measuring equipment (e.g., micrometers, microscopes, calipers, height gauges) to verify part conformity to specifications
  
  
• Created and reviews First Article Inspection Reports (FAIR) IAW AS9102
  
  
• Identify, document, and resolve production and test anomalies in accordance with specifications, procedures and drive corrective action as required
  
  
• Complete inspection reports and MES/SAP transactions
  
  
• Ensure inspection devices are properly calibrated and maintained
  
  
• Validate compliance to inspection protocols and quality procedures
  
  
• Provides 2nd shift quality turnover status reports
  
  

• 
  
• Generate Non-Conformance reports in SAP for discrepancies found during operations with accurate defect descriptions
  
  
• Work with, Engineers, and other personnel to assist in CAPA/RCCA to increase product improvement and lower QMS defects
  
  
• Support 2nd shift team members drive customer satisfaction through ensuring the consistent and repeatable on-time delivery of conforming finished goods per customer requirements
  
  
• Communicate and help resolve non-conforming quality related issues to the 2nd shift team
  
  
• Process non-conforming products and assist engineering in root cause analysis and corrective action
  
  

• 
  
• High School Diploma or equivalent and a minimum of 5 years of prior relevant experience within Aerospace and Defense
  
  
• Experience performing visual inspection on different commodities including CCA's, PCB's, machined parts, Cables/Harnesses, electronic assemblies and component parts.
  
  
• Experience with electronic assemblies and interconnect systems
  
  
• Experience reading and interpreting engineering design drawings
  
  
• Experience performing detailed dimensional inspections using precision measuring tools
  
  
• Experience in using calibrated precision measurement tools
  
  
• Experience in working in an AS9100 quality system
  
  
• Experience in inspecting crimping, solder, conformal coating, staking and surface mount components
  
  

• 
  
• 
  IPC-A-610H
  
  
• 
  J-STD-001
  
  
• 
  IPC-WHMA-A 620D
  
  
• 
  IPC-A-600K
  
  
• 
  AS9102 training/certification
  
  
• 
  ESD Training and awareness
  
  

• 
  
• Experience with and understanding of AS9100/ISO9001 QMS requirements
  
  
• Proficient in SAP 4 Hana or ECC, and Microsoft products.
  
  
• Able to lift 30 lbs
  
  
• Technical experience/education is desired
  
  
• 
  
  

• 
  
• Level I: $15.83 - $24.65
  
• Level II: $16.49 - $28.60
  
• 1st Shift Hours: 6:00am-2:30pm
  
• All members included in annual cash bonus opportunity
  
  • 
    
  • 401(k) match (4.5%)
    
  • Annual Woodward stock contribution (5%)
    
  
  
  
• Tuition reimbursement and Training/Professional Development opportunities for all members
  
• 12 paid holidays, including floating holidays
  
• Industry leading medical, dental, and vision Insurance upon date of hire
  
• Vacation / Sick Time / Vacation Buy-up / Short Term Disability / Bereavement leave
  
• Adoption Assistance
  
• Employee Assistance Program, including mental health benefits
  
• Member Life & AD&D / Long Term Disability / Member Optional Life
  
• Member referral bonus
  
• Spouse / Child Optional Life / Optional AD&D / Healthcare and Dependent Care Flexible Spending
  
• Voluntary benefits, including:
  
  • 
    
  • Home / Auto Insurance discounts
    
  • Whole Life Insurance / Critical Illness Insurance / Legal Assistance / Military Leave
    
  
  
  

• 
  
• Assemble and/or perform preset calibration/final testing. Performs low to moderately complex assembly and test. Products may include but are not limited to small products, light subassemblies, and/or complete units of a smaller size.
  
• Assemble, install, align, adjust and fit subassemblies and parts or auxiliary equipment using appropriate tools and equipment as per work instructions.
  
• Clean parts and maintain tooling and equipment per proper work instructions.
  
• Follow work instructions associated with assembly skills to become certified for work being performed.
  
• Work with close tolerances and fits to meet engineering and operating requirements.
  
• Complete all required paperwork in an accurate and efficient manner, including Quality Assurance and Test Record.
  

• 
  
• High school diploma or equivalent required
  
• Mechanical aptitude required
  
• Ability to use a variety of basic hand tools
  
• Basic written/verbal communication skills
  
• Basic computer skills
  
• Willingness to demonstrate eagerness, enthusiasm, and optimism for work activities
  
• Detail orientation and ability to follow work instructions
  

• 
  
• High school diploma or equivalent required
  
• 2-5 years of related experience required
  
• Mechanical aptitude required
  
• Ability to use a variety of basic hand tools
  
• Basic written/verbal communication skills
  
• Basic computer skills
  
• Willingness to demonstrate eagerness, enthusiasm, and optimism for work activities
  
• Detail orientation and ability to follow work instructions
  

• None.

• Configures equipment and calibrates gauge settings.
• Recognizes condition of punches and dies, ensures tooling, and reorders as needed.
• Loads materials onto equipment, feeding material through die; positions and removes parts from die.
• Changes tooling between production runs.
• Maintains safe operations by adhering to safety procedures and regulations.
• Maintains equipment by following the manufacturer's instructions, troubleshooting malfunctions, and calling for maintenance.
• Use of forklift to move materials.
• Maintains 6s (sort, set, shine, standardize, sustain, safety) standards in all workstations.
• Completes other duties as assigned by supervisor.

• Knowledge of blueprint reading.
• Organizational skills and attention to detail.
• Time management skills with a proven ability to meet deadlines.
• Basic math skills (ex. addition, subtraction, multiplication).
• Basic computer skills.
• Mechanical inclination.

• High school diploma or equivalent.
• At least two years related experience required

• Uncontrolled environmental conditions: noise, dust, dirt, mobile equipment, and walking surfaces strewn with materials, power cords and tools is typical.
• Occasional lifting up to 40 lbs.,
• Any combination of standing, bending, climbing, balancing, kneeling, crouching, reaching, handling, fingering, feeling and walking 8 to 10 hours per day.
• Ability to work up to 8-10 hour shifts and overtime as required by the work.
• Use of all limbs, dexterous and steady use of hands and arms for long periods of time.
• Simultaneous mental and muscular coordination, visual and audio awareness of surrounding area

• Technical school diploma or equivalent combination of education and experience.
• Minimum 5-7 years' experience with Mechanical / Electronic part inspection in a manufacturing or production Environment.
• Experience in quality with machined / mechanical parts using GD&T interpretation, able to do programs for automatic inspection with Optical Vision Systems and CMMs. plus. Able to use Profilometers and special Microscopes for visual characteristics with other measuring tools and instruments.
• Knowledgeable with AS9102 FAIR (First Article Inspection Report) documentation and Inspection.
• Familiar with AQL, sampling methods and traceability.
• Strong verbal/written communication skills required for multi-faceted interactions with all levels of personnel within the organization, as well as any and all outside agents, including but not limited to; vendors, suppliers, customers, etc.
• Strong computer literacy, with MS Office/PC expertise and demonstrated experience with applicable systems, programs, equipment, etc.
• Must be a US Citizen.

• Train other inspection personnel on CMM software and manual measurement techniques.
• Perform Mechanical measurements and visual quality assessments of received items, work-in-progress and finished goods.
• Performs 1 st Piece Inspection on machined parts and inspection for product Quality Analysis.
• Inspect with thread gages, GO/NO-GO plug gages, V-Blocks, Gage Blocks, height stands, dial indicators, various types of ID/OD micrometers, inspection of thread Pitch Diameter with special gages.
• Generate spreadsheets for data collection, evaluate history of product and recommend on Sample Size as per an AQL
• Reconcile final inspection documentation for shipments
• Interact with source inspector as needed and part-take in source inspection duties if necessary.
• Read, understand and interpret Mechanical/Electronic drawings.
• Approve incoming materials by confirming specifications, conducting visual and physical measurement of the product., rejecting if necessary and processing part thru to the next step.
• Approve in-process production by confirming specifications, conducting visual, physical measurement and physical measurement of the product., communicating required adjustments to production supervisor.
• Approve finished products by confirming specifications, conducting visual and physical measurement of the product.
• Document inspection results by completing reports and logs, summarizing re-work and waste, and inputting data into quality database
• Always verify equipment is operational and calibrated, follow operating instructions and coordinate repairs
• Work with Engineering, Operations, and other sources to resolve issues and meet goals

• Bring initiatives and activities to closure in a timely manner through effective interaction with individuals, both internal and external to the Marotta organization (as required).
• Maintain and continue to elevate relationships with Business Development, Engineering, Operations, Customer Service and all other facets of the company
• Abide by all safety, quality, housekeeping and company policies/procedures to ensure compliance to various regulatory and internal system requirements
• Contribute to a positive and cooperative work environment through effective communication at all levels internal and external to the organization
• Actively participate in team meetings, improvement initiatives/programs, etc. to provide constructive recommendations and initiate actions to support company initiatives/goals
• Consistently demonstrate commitment to company values
• Keep management informed of area activities and of any significant problems
• Assume responsibility for related duties as required or assigned
• Ensure that work area and work areas of direct reports are clean, secure, and well maintained
• Complete special projects and miscellaneous assignments as required

• While performing the duties of this job, the employee can be exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment may be loud.
• This job interacts both in a professional office environment and a manufacturing/machine shop environment. This role uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines, as well as environments inclusive of the appropriate eye, hearing and foot protection (as required).
• This is a full-time position. Overtime and weekend work may be required as job duties demand.
• Travel is rare but may be required to coordinate proper CMM inspection techniques with Suppliers.

• While performing the duties of this job, the employee is regularly required to talk and hear.
  • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Vision and color vision must pass job-required vision screening
• The employee is occasionally required to sit; climb or balance; and stoop, kneel, or crouch
• 
  The employee may be required to lift and/or move items weighing up to 25 pounds.

Perform routine and non-routine cleaning tasks along with other staff on Meltblown equipment assuring their ongoing cleanliness

Ability to set-up, operate and troubleshoot and/or make proper machine adjustments to the process to produce quality product that meets and/or exceeds customer expectations

Understand and be able to do basic upkeep and troubleshooting on the following equipment:

• Meltblown machines in total including all sub-systems
• TSI Testers
• Cutters
• Presses
• Resin drying equipment
• Resin mixing equipment
• Silo and sensor for silo depth

Collaborate with and support engineering from Neillsville and Stoughton with new processes and products

Directly engage engineering and maintenance in a timely manner to assist with issues

Assist in creation of documentation for existing and new processes and procedures

Properly complete all documentation within the department including quality records, maintenance logs, production logs, 5S scores, etc as directed

Understand and apply media specifications as needed to maintain product quality.

Assist in managing scrap amounts by promptly addressing causes of scrap including involving engineering or maintenance

Calibrate machines and testing equipment per schedule and as needed, perform quality test procedures as required.

Support and maintain OE initiatives throughout designated work area

Responsible for completing weekly and monthly Preventative Maintenance on equipment.

Apply all safety, quality, ITAR, and other plant processes and procedures to the products

Keep department organized and focused to meet production demands (5S Sort, Straighten, Shine, Standardize, Sustain)

Communicate effectively with department, maintenance, engineering, plant leadership, and any other co-workers

Demonstrated ability to perform critical job functions (as outlined above) and train new employees in the department.

Other duties as assigned by the team leader or manager

Ability to follow directions, read blueprints, job data sheets, safety instructions, etc

Good written and oral communication skills

Must be a quick learner with strong problem solving skills

Must be very adaptive to change and be an active change agent

Must be motivated and self-driven, able to work with minimal supervision

1-2 years experience working in a similar position is preferred

Must be able to walk/stand at least 75% of the time including during required overtime hours.

Must be able to lift up to 35 lbs

Health, Safety & Environmental (HSE) Stop work and immediately report any major injury hazards. Report any work-related injury, illness, incident or hazard. Comply with HSE standards, policies, procedures & regulations. Use appropriate personal protective equipment. Promote interdependence by looking out for one another. Correct hazards within your control and capabilities. Recognize how your work may impact the environment and work to minimize the negative impact. Engage in HSE Training.

Quality Follows all applicable standard work, process documentation and quality procedures such as Statistical Process Control (SPC), poka-yoke and visual standards. Raises issues to minimize cost and quality exposures. Performs quality inspections. Identifies and controls non-conforming material.

Delivery Operates manual and automated equipment to manufacture and assemble product in order to create the proper characteristics and dimensions necessary to meet customer expectations. Demonstrates a high level of competency in core work skills. Achieves production goals. Works at the required cycle time or defined engineering standard. Maintains clean and orderly work area, including routine housekeeping tasks and machine cleaning tasks and performs planned operator care and maintenance tasks. Remains flexible and performs other miscellaneous duties, as required, to meet production goals. Works with peers, skilled trades and support staff to maintain and identify equipment needing repair.

Teamwork Communicates effectively with the assigned team and with all support teams. Completes training and personal development in line with business requirements. Participates actively in ways to improve quality, safety, process, material flow, and employee development.

We are deliberately working towards a brighter future. Our daily actions consider what is important to our people, our customers and our planet. We are focused on performance, durability and sustainability to serve the world better.

Job Identification 1389

Job Category Manufacturing

Locations 1401 E Division Street, Neillsville, Wisconsin, 54456, US

• 
  
• Plan, set-up, prepare and perform fabrication, assembly, test and associated precision fabrication processes.
  
• Plan, set-up and operate a variety of tools and equipment such as power presses, band saws, belt sanders, expanders, and power shears to cut, form, trim, fit, roll, bend, drill and saw material to fabricate detail parts following established methods and procedures.
  
• Plan, set-up, and perform resistance spot welding and salt braze processes.
  
• Operate a variety of conventional and CNC/NC equipment to perform milling, drilling and turning operations to established methods and procedures.
  
• Plan, set-up, edit programs, and operate various presses and lasers to cut and form details.
  
• Plan, set-up, and perform pressure, leakage and functional tests.
  
• Plan, set-up and operate furnaces for processes such as drying, annealing, aging and curing product.
  
• Receive, unload, check, record, prepare, inventory, store, disburse, and deliver a variety of materials, products and equipment.
  
• Maintain rough stores, cribs, gage cabinets, and point of use storage areas. Order, organize, and store such items as supplies, materials, chemicals and tools.
  
• Safety wire, prepare product, make and apply nameplates and package for shipment.
  
• Fabricate and repair containers.
  
• Participate in review, analysis and ordering of purchased parts and materials to ensure appropriate inventory levels. Communicate with suppliers on delivery and quality concerns.
  
• Review open purchasing and shop part requirements. Review regularly with internal suppliers and purchasing. Coordinate and expedite deliveries as required.
  
• Perform visual, dimensional and functional inspection using variable measuring instruments such as micrometers, verniers and checking fixtures.
  
• Mix and apply bonding agents, coatings and chemicals.
  
• Check calibration of gages, instruments and equipment in accordance with established procedures. Record and document as required.
  
• Prepare test pieces and micros using equipment such as grinders, cutters, sanders, polishers and mounting presses.
  
• Sharpen or modify tools, make up simple forming dies, tooling and templates.
  
• Perform periodic maintenance such as cleaning and lubricating fixtures and equipment, adding fluids, charging filters and tightening hardware.
  
• Participate in audits of processes, procedure and work areas.
  
• Use computers and office equipment to record and process transactions.
  
• Utilize and maintain all necessary documentation such as logs, reports, charts, sampling plans, statistical process control records and nonconformance documents.
  
• Instruct one or two fellow employees in proper performance of duties.
  
• Utilize statistical methods to monitor process control and capability. Use data to investigate areas for potential process improvement.
  
• Improve processes and solve problems in cooperation with fellow employees and technical support.
  
• Move parts and materials to designated locations in accordance with material flow procedures, and initiate follow-up lists.
  
• Keep equipment and surroundings neat, clean and organized.
  
• Perform related duties as required within the scope of this job function.
  
• 3rd Shift: 12am to 7am, Monday to Friday.
  
• Training may take place on 1st, 2nd Shift, or 3rd Shift for up to 3 months.
  

• 
  
• Must have a high school diploma or GED.
  
• 1-2 years of experience in quality control and inspection processes.
  
• Prior use of air tools and fixtures to set-up parts for welding and understanding of location gages such vernier calipers and depth micrometers.
  

• 
  
• Sheet metal working skills such as grinding, bending, cut-off tools, polishing, deburring.
  
• Experience completing pressure test, assembly of Heli coils, riveting, and spot welding.
  
• 5-7 years of relevant experience in quality control and inspection processes.
  
• Familiarity with statistical process control (SPC) and other quality assurance methodologies.
  
• Experience with the use of precision measuring instruments and inspection equipment.
  

• 
  
• Medical, dental, and vision insurance
  
• Generous 401(k) plan that includes employer matching funds
  
• Collins provides eligible employees with paid time off
  
• Tuition reimbursement program
  
• Student Loan Repayment Program
  
• Life insurance and disability coverage
  
• Optional coverages you can buy: pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection
  
• Birth, adoption, parental leave benefits
  
• Ovia Health, fertility, and family planning
  
• Adoption Assistance
  
• Autism Benefit
  
• Employee Assistance Plan, including up to 10 free counseling sessions
  
• Healthy You Incentives, wellness rewards program
  
• Doctor on Demand, virtual doctor visits
  
• Bright Horizons, child and elder care services
  
• Teladoc Medical Experts, second opinion program
  
• And more!