Calibration Certificate Jobs in Usa

• 
  
• Develop QA/QC documents of the complete project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered, and other important QA/QC documents
  
• Follow all standards to perform inspection and tests on all procedures and oversee all testing methods and maintain high standards of quality for all processes
  
• Review the quality of all materials at the site and ensure compliance with all project specifications and quality and collaborate with the department for all material procurement and maintain a quality of materials
  
• Support the effective implementation of all test and inspection schedules and ensure adherence to all procedures and coordinate with various teams to perform quality audits on processes
  
• Assist employees to ensure knowledge of all quality standards and ensure compliance to all quality manuals and procedures and collaborate with contractors and suppliers to maintain the quality of all systems
  
• Manage to lift all types of equipment and handle the efficient storage of all hazardous materials and perform quality audits as per the required schedule
  
• Understand all products and non-conformance processes and evaluate all documents to ensure the maintenance of optimal quality and prepare monthly reports to evaluate performance
  
• Monitor an efficient system and record for all project activities and analyze all processes to ensure all work according to quality requirements
  
• Understand all work methods and maintain knowledge on all quality assurance standards and monitor continuous application for all quality assurance processes and recommend corrective actions for all processes
  
• Support and follow a method statement for the activity including risk assessment and job safety environmental analysis and Inspection Test Plan and Checklist based on specifications of the project
  
• Liaise the Technical Engineer for submission of material submittals to Consultant
  
• Develop and maintain inspection reports
  
• Ensure compliance to federal and state laws, as well as company standards and specifications
  
• Maintain calibration of quality testing equipment
  
• Perform inspections across all stages of production
  
• Advising on procedures to improve production efficiency
  
• Prepare and maintain test data for review
  
• Evaluate data and draft reports, noting any relevant deviations from existing standards
  
• Identify areas for quality control improvement and implement new methods accordingly
  
• Communicate quality or compliance concerns with urgency
  

• 
  
• Technical Military MOS, trade school and/or degree
  
• Experience and/or education and internship in complex facilities or mission critical projects is preferred
  
• Any civilian or military technical certifications is a plus
  
• Experience with writing and enforcing standard operating procedures (SOPs)
  
• Solid understanding of test equipment & software
  
• Minimum of 5-9 years of inspection and/or production experience
  
• Strong working knowledge of various mathematical concepts including fractions, ratios, and proportions
  
• Demonstrated ability to work independently with minimal supervision
  
• Excellent organizational skills
  
• Demonstrated ability to analyze and interpret information
  
• Must be a US citizen
  
• Must be able to travel 70%
  
• Must live reasonably close to Shreveport, LA
  

• 
  
• Advanced Excel skills preferred
  
• Experience using Microsoft Office Suite, Word and Microsoft Project
  
• Basic knowledge of systems design for various projects
  

• 
  
• No certificates or licenses required
  

• 
  
• No supervisory responsibilities for this position.
  

• 
  
• Occasionally lift and or move objects 10 to 50; Frequently required to stand, walk, stoop, kneel, crouch or crawl. The employee is occasionally required to sit and climb or balance. Specific vision abilities for this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust and focus. Noise Level can be moderate to high.
  

• 
  
• Design / Engineering
  
  • 
    
  • Generate design documents for SCADA/Automation projects
    
    • 
      
    • Develop design document narratives
      
    • Perform requirements analysis
      
    • Generate Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field Testing
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor's degree in electrical engineering and 5-7 years field experience
  
• Associate degree in the electrical field and 10 years field experience
  
• High school diploma and 15 years field experience
  
• 5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
  
• Experience in reading electrical and control schematics
  
• Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control and protection systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
  
• Must be a US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

• 
  
• Design / Engineering
  
  • 
    
  • Assists Senior Engineers in design documents for SCADA/Automation projects
    
    • 
      
    • Developing design document narratives
      
    • Perform requirements analysis
      
    • Understanding of Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field Testing
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor degree in electrical or mechanical engineering and 2-5 years field experience
  
• Associate degree in the electrical or mechanical field (add 3 years field experience)
  
• High school diploma (add 5 years field experience)
  
• 2-5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
  
• Experience in reading electrical and control schematics
  
• Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control and protection systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
  
• MUST BE A US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

• 
  
• Design / Engineering
  
  • 
    
  • Assists Senior Engineers in design documents for SCADA/Automation projects
    
    • 
      
    • Developing design document narratives
      
    • Perform requirements analysis
      
    • Understanding of Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field TestingMaintenance
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor's degree in electrical or mechanical engineering and 2-5 years field experience
  
• Associate degree in the electrical or mechanical field (add 3 years field experience)
  
• High school diploma (add 5 years field experience)
  
• 2-5 years' experience with designing and servicing controls systems for chiller plants, complex air distribution equipment, equipment installation, and testing
  
• Experience in reading mechanical and control schematics
  
• Experience in building automation systems (BAS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with test equipment and test equipment software
  
• Experience with networking design, configuration, and troubleshooting
  
• Experience with air handlers, chiller plant systems and data center CRAC units
  
• Ability to travel up to 80%
  
• MUST BE A US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, JCI, ALC, Distech, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

We work nationwide on some of the most challenging, exciting construction and maintenance projects in the industrial sector. We are currently hiring skilled first-class Welders for multiple sites in the US. If you are a hardworking person who possesses the skills and ability to perform the job as outlined below, we would love to hear from you! 

Essential Functions of this position may include but are not limited to:

• Ideal candidates will possess welding experience with GMAW, GMAW-P and SMAW
• Performs welding processes on carbon steel (OSS, HSS, HY, HSLA, etc.) assemblies to required tolerances using welding metals, metal alloys and with various joint configurations.
• Determines layouts and welds parts and assemblies according to engineering drawings and specifications.
• Oxy/Fuel pre-heat and carbon arc gouging, occasional mirror welding. Verifying weld size using weld gauges.
• Will monitor and verify quality in accordance with SSP's or MDD's.
• Requires occasional heavy lifting up to 45lbs multiple times during an 8 to 12-hour shift. 
• Requires standing and walking for extended periods during an 8 to 12-hour shift. 
• Requires occasional bending from waist, crouching, kneeling and crawling periodically during an 8-to-12-hour shift. 
• Requires occasional climbing ladders up to 25 feet at a time. 
• Requires occasional working in confined space work environment with the potential of extreme temperature exposure, chemical exposure, and radiation exposure during an 8-to-12-hour shift.

Please note that the essential job functions listed above are not intended to be all-encompassing. Employees may be asked to perform tasks which are not listed in this description but may also be considered essential for employment. The following physical requirements are essential job functions necessary to perform critical welding duties safely.

Qualification, education, and experience requirements:

• Minimum 3 years of related experience with High School diploma/GED and/or certification in assigned area preferred.
• Must be able to work independently with minimal supervision/oversight; have working knowledge of precision calibration tools (weld gauges), be able to operate multiple types of welding equipment, and possess good trouble shooting / problem solving skills.
• Highly motivated, self-starter with the ability to work multiple shifts.
• Able to read and interpret drawings, technique sheets and weld symbols.
• Ability pass respirator fit-check and wearing of respirator for portions of or all of an 8 to 12-hour shift or as required. Must be clean shaven for fit-check and dawning of respirator. Must be able to comply with respirator fit-testing requirements. Clean-shaven status may be required in accordance with OSHA respirator safety standards. Reasonable accommodations will be considered where required by law.
• Must be a team player. 
• Flexible, willing to work long hours, safety oriented.
• Experience with the fabrication of submarine parts and modules is preferred.

Weld Test Requirements:

• GMAW-SP & GMAW-P
• GMAW-P will be 3 position plate tests with MIL-100S-1 wire; GMAW-SP will be in 2G position with MIL-100S-1 wire.
• Welding tests will be bent immediately after the test 
• Further volumetric welding tests will be given to mimic hull penetration and liner installations.
• Successful completion of volumetric weld tests is required for X-Ray placement.

Successful candidate must possess the willingness and ability to complete and pass all pre-employment and employment screening requirements which may include but are not limited to medical, psychological (if required by site), background and substance abuse screening(s).

Work Authorization Requirements 

• Proof of Identification - Driver's license or any other identification card issued by the federal, state, or local government that contains a photograph and the person's name, date of birth, gender, height, eye color, and street address.

Proof of US Citizenship (must provide one)

• U.S. birth certificate (birth documents issued by a hospital, notifications of birth registrations; and Puerto Rico birth certificates issued before July 1, 2010, are not accepted
• Valid, unexpired U.S. passport or U.S. passport card
• U.S. Certificate of Citizenship or Certificate of Naturalization
• A record of Military Processing-Armed forces of the United States (Form DD 1966), provided it reflects U.S. citizenship.

U.S. citizenship is required for this role due to federal contract requirements. Due to federal contract requirements, U.S. citizenship is required for this position. Work authorization will be verified in accordance with federal law after a conditional offer of employment.

Compensation is determined based on experience, certifications, and client requirements. Summit Talent Strategies follows pay transparency principles. Compensation Range: $55.00 – $57.75 per hour, based on experience, certifications, and successful completion of required weld testing. Overtime and site differentials may apply.

All screenings are required by the federal contractor’s site‑specific safety protocols and are applied consistently to all applicants.

Summit Talent Strategies is an Equal Opportunity Employer. All qualified applicants will receive consideration for opportunities without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. We affirmatively seek to advance equal opportunity for all. 

We will not discharge or otherwise discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. Employees who have access to compensation information as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information.

We maintain applicant records and collect voluntary self‑identification information in accordance with applicable federal contractor affirmative action and record-keeping requirements.

Reasonable accommodations will be reviewed and provided in accordance with ADA and federal contractor requirements. If you are an individual with a disability and need a reasonable accommodation to apply or participate in the selection process, please contact   Please include the accommodation you are requesting and the job title.

Quality Assurance Supervisor

Job description:

This position is based at our Hampton Farms location in Elizabethtown, NC.

Purpose:

The quality assurance Supervisor of Hampton Farms is involved in the manufacture of food products intended for the consumer. The quality assurance Supervisor is a critical position in Hampton Farms food quality and safety for producing our peanut product. The quality assurance supervisor is trained in various areas pertaining to the job required. He / she will assume all duties as the quality assurance manager in his / her absence. This position will report to the Quality Manager.

Essential Duties and Description:

* Verify with the production scheduler what products are running at the beginning of each shift.

* Must be able to complete work required paperwork, for example: QA documents, metal detector sheets, roasting peanuts report, and weight check sheets. Must also review quality control technician's paperwork.

* Be able to collect samples for retains and for micro samples and be able to document. Send out samples for testing with proper paperwork.

* Review daily roaster logs and validate roaster log data. Immediately report any out of validation conditions to the plant manager and quality manager.

* Serve as Backup SQF Practitioner

* Responsible for food safety every day, but primary responsibility if the if the Quality manager is out of the plant. Be able to determine if a product needs to be put on hold and document when product goes on hold or if product is reworked.

* Serve on Food Safety team, Food defense team, hold team meetings and other responsibilities as defined.

* Train QA techs on pre-operational sanitation inspections and GMP inspection. Review these results and take corrective actions if needed.

* Must have intermediate computer skills to produce reports, programs, procedures, build files, and label printing

* Complete Certificate of Analysis (COA) based on micro results for finished product.

* Assist with maintaining files for Ingredient COAs, Kosher certificates, Organic Labeling, customer information, consumer complaints and shipment logs.

* Maintaining Master Sanitation Schedule, Chemical Control Program, Sanitation Training and techniques.

* Verify with production that all product produced meets Hampton Farms and customer quality standards. Monitor all specifications for raw materials and finished product

* Participate in Quality audits

* Assist Production Supervisors in any task that needs to be done.

Skills and Competencies:

* Run Customer complaint program

* Knowledgeable of SOP's for all areas involved in food safety and quality.

* Familiar with SSOP's for all areas

* Expert on CCP's and validations

* Manage lab equipment calibration

* Expert on Peanut butter testing and capability of outside labs

* Provide instruction and supervision to lab technicians

* Manage Plant inspection program and pre-operational inspection programs

* Knowledgeable of HACCP, SQF requirements

* Ability to get certification of Food Safety & Sanitation courses

* Complete PCQI Certification

* Complete HACCP Certification

* Complete courses for SQF practitioner

* Participate in Food and Safety audits

* Be able to conduct a Mock recall

* Provide assistance to QA manager as requested

* Provide timely Assistance to production for quality / food safety issues. root cause, corrective actions to keep line running safely

* Able to handle confidential material and situations

Measures for Success:

* No recalls

* Customer complaints completed within 30 days of receipt of problem material.

* Weekly poundage goals achieved

* Lab tests performed accurately with quick feedback on problems to production

General Expected Behaviors

Problem Solving:

* Solution Oriented, works to solve problems or achieve outcome

* If needed, find alternative ways to complete a task

* Reacts to challenges by locating or providing solutions.

* Responsible for identifying all requirements of a task, evaluates opportunities or strengths then takes the appropriate action as required.

* Makes timely, well-considered decisions based on current data available and is flexible with scheduled work hours/shifts

* Supports the team by offering to help with unexpected work as needed

Safety:

* Actively follows and ensures all company policies and procedures.

* Engages other employees in setting high safety awareness standards.

* Include safety emphasis in all employee meetings.

* Wears proper PPE at all times

Work Ethic:

* Dependable and punctual to ensure company and workplace goals.

* Treats everyone with respect and dignity.

* Responds to challenges with a sense of urgency, informing other team members as required and acting accordingly.

* Actively assesses information and identifies issues as necessary or required to ensure a friendly workplace.

* Plans and aligns appropriate resources to accomplish company goals.

Communication:

* Good written and verbal skills and able to communicate in a clear and understanding manner.

* Applies good questioning and listening skills to ensure understanding of information being shared.

* Treats everyone with respect and dignity, even when he/she may not agree on opinions

* Identifies barriers to communication and works towards eliminating barriers.

Additional Sanitation Responsibilities:

Assumes Primary Responsibility for Food Safety when the Quality Assurance Manager is out of the Plant.

Education and Experience:

Required:

* High School diploma or equivalent(GED). Preferred Associate Degree in similar field

Desired:

* Experience with food manufacturing Principles and implementation.

* 1-3 years' production manufacturing experience.

* Must be able to work well both independently and collaboratively.

Skills/Competencies:

* Ability to clearly present recommendations/ideas and to summarize issues.

* Ability to appropriately handle confidential material.

Certificates, Licenses, Registrations:

None Required

Job Physical Demands:

* Continuous standing in one location for long periods (2-3 hours before break)

* Climbing :ladders, stairs, etc. -using feet and legs or hands and arms 1/3 of the time

* Stooping: Bending body downward and forward by bending spine at the waist

* Crouching: Bending the body downward and forward by bending legs and spine

* Reaching: Extending hand(s) and arm(s) in any direction

* Handling: Seizing, holding, grasping, turning, or otherwise working with hand or hands

* Hearing: Perceiving the nature of sounds by ears

* Depth Perception: Three?dimensional vision. Ability to judge distances

* Color Vision: Ability to identify and distinguish colors

Work Environment

* Combination of manufacturing environment along with duties that will require employee to work in a production/plant environment where physical hazards such as industrial equipment and forklifts may be present.

EOE - Equal Opportunity Employer

For Additional Information Visit:

• 
  
• Initiates design documents for small projects and in support of large programs
  
• Develops design documents narratives
  
• Performs requirements analysis
  
• Develops Sequence of Operations / System Functional Documentation
  
• Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
  
• Develops Specifications
  
• Performs QA/QC and technical reviews of designs
  
• Plans and Design Procedures and Equipment for Integrated Systems Factory Testing
  
• Comment Resolution
  

Mechanical-focused controls engineer (BAS/BMS)

• 
  
• Experience on EPMS monitoring
  
• Certifications in Platforms (at least one), familiarity with any others preferred: Ignition, Aveva, Automated Logic, Siemens, Schneider EBO, Niagara N4, Iconics Gen64
  
• Experience with Federal Government controls projects (ICS/EMCS/UMCS) preferred
  
• Familiarity with Cisco network switch programming and design preferred
  

• 
  
• Lead programming / configuration team efforts for complex automation and SCADA applications.
  
• Program / Configure / troubleshoot PLCs, RTUs, and/or HMI systems
  
• Testing / Troubleshooting / Deployment / Commissioning
  
• Author testing / commissioning procedures
  
• Preparation of test reports
  
• Originates test procedures
  
• Commissioning of deployed systems
  
• Development of test equipment and simulation devices
  
• Perform Factory and Field Testing
  

• 
  
• Perform troubleshooting on service calls to existing and legacy system operators
  
• Perform hardware / software upgrades and replacements on existing systems
  

• 
  
• Conducts any surveys, inspections, tours, etc. of client sites, as required
  
• Prepares cost estimates and supporting documents for small projects
  
• Perform hardware / software upgrades and replacements on existing systems
  
• Evaluation and pricing of change orders
  

• 
  
• Assigns technical tasks and coordinates with entry-level engineers
  
• Assigns tasks and coordinates with Technical Staff
  

• 
  
• Experience in reading electrical and control schematics and plans
  
• Experience in control system startup, configuration, and calibration
  
• Experience in testing and troubleshooting control systems
  
• Experience using basic electrical and machinist hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• 3-7 years' experience
  
• Bachelor's degree in engineering or higher
  
• Associate degree (add 3 years)
  
• High school diploma (add 5 years)
  
• Must be a US Citizen
  

• 
  
• Experience in computer networks
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software
  
• Standard Office Software (Microsoft Word, Excel, etc.)
  

• 
  
• Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
  
• Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
  

• 
  
• Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
  
• Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
  
• Design Build Institute of America (DBIA)
  
• Engineer in Training (EIT) in relevant in field
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

Company: Central Admixture Pharmacy Job Posting Location: Phoenix, Arizona, United States Functional Area: Quality Working Model: Onsite Days of Work: Friday, Thursday, Wednesday, Tuesday, Monday Shift: 5X8 Relocation Available: No Requisition ID: 10237 B.

Braun Medical Inc., a leader in infusion therapy and pain management, develops, manufactures, and markets innovative medical products and services to the healthcare industry.

Other key product areas include nutrition, pharmacy admixture and compounding, ostomy and wound care, and dialysis.

The company is committed to eliminating preventable treatment errors and enhancing patient, clinician and environmental safety.

B.

Braun Medical is headquartered in Bethlehem, Pa., and is part of the B.

Braun Group of Companies in the U.S., which includes B.

Braun Interventional Systems, Aesculap® and CAPS®.

Globally, the B.

Braun Group of Companies employs more than 64,000 employees in 64 countries.

Guided by its Sharing Expertise® philosophy, B.

Braun continuously exchanges knowledge with customers, partners and clinicians to address the critical issues of improving care and lowering costs.

To learn more about B.

Braun Medical, visit CAPS®, the nation's largest network of outsourcing admixture pharmacies, has been delivering high-quality, same-day, admixture services and solutions to hospitals and outpatient facilities for more than 28 years.

Along with the nation’s largest 503A sterile injectable outsourcing network, CAPS offers industry-leading batch compounding on a national scale through three 503B registered outsourcing facilities.

With experience, capacity, and a passion for safety, CAPS is your 503B solution.

CAPS is part of the B.

Braun Group of Companies in the U.S.

Position Summary: Ensure and assist with site-specific quality compliance according to CAPS Standard Operating Procedures (SOPs) & specifications, quality review of documents, label control, assist with release activities and product inspections.

Essential Duties/Responsibilities: Perform product inspection for defects, leaks and particulates.

Perform environmental monitoring of personnel (as needed) and complete documentation.

Assist in the media fill process validations to include inspection of filled units Perform document review of compounding activities such as cleaning records, line clearance forms and inventory sheets: Verify that raw materials meet specification Verify and account for labeling Review temperature and BMS alarms Verify that product test results meet specification limits Verify that all documentation is complete Document non-compliance and work with supervisor/lead if further investigation is needed Submit samples to the appropriate lab for particulate identification or microbial analysis.

Assist with equipment calibration program and maintenance record files.

Assist with raw material release and movement.

Under the direction of supervisor/lead, document and initiate quality events for deviation and complaint investigations.

Support internal & external audits.

Maintain quality records (equipment calibration and maintenance, training, deviation and complaint investigation, environmental monitoring, Certificate of Analysis, clean room certification etc.).

Participate in Quality Manager’s staff meetings Expertise: Knowledge & Skills Knowledge of pharmacy operations and regulatory guidelines.

Ability to perform calculations.

Ability to work within established procedures and practices Strong organizational skills and attention to detail Ability to effectively troubleshoot issues.

Qualifications
- Experience/Training/Education/Certification/Etc: Required: Minimum of High School Diploma/GED with work experience Minimum of 2 years experience in a quality or manufacturing department of a pharmaceutical, Medical Device or Allied Health Science.

Desired: Experienced in aseptic operations.

Experience within a regulated environment Associates Degree or higher level degree in Technician technical scientific discipline, Biology, Microbiology, Chemistry or Pharmacy.

While performing the duties of this job, the employee is regularly required to sit and talk or hear.

The employee frequently is required to use hands to handle or feel and reach with hands and arms.

The employee is occasionally required to stand and walk.

The employee must occasionally lift and/or move up to 45 pounds.

Responsibilities: Other Duties: The preceding functions have been provided as examples of the types of work performed by employees assigned to this position.

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.

The requirements listed in this description are representative of the knowledge, skill, and/or ability required.

Management reserves the right to add, modify, change or rescind the work assignments of different positions due to reasonable accommodation or other reasons.

Physical Demands: The employee must occasionally lift and/or move up to 45 pounds.

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Work Environment: Indoors, cleanroom, working environment limited to a small area, wearing protective cleanroom attire, tolerating controlled temperatures and loud noise.

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

The noise level in the work environment is usually moderate.

Schedule: M-F 9am to 5pm Salary Range: $21
- $26 The targeted range for this role takes into account a range of factors that are considered when making compensation and hiring decisions; included but not limited to: skill sets; experience and training; licensure and certifications; and other business and organizational needs.

The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Compensation decisions are dependent on the facts and circumstances of each case.

The range provided is a reasonable estimate.

B.

Braun offers an excellent benefits package, which includes healthcare, a 401(k) plan, and tuition reimbursement.

To learn more about B.

Braun and our safety healthcare products or view a listing of our employment opportunities, please visit us on the internet at .

Through its “Sharing Expertise®” initiative, B.

Braun promotes best practices for continuous improvement of healthcare products and services.

We are an equal opportunity employer.

We evaluate applications without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected characteristic.

Know Your Rights: Workplace Discrimination is Illegal, click here .

All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status.

Compensation details: 21-26 Hourly Wage PIefaeb87f1c7d-25448-39867542

KCU - Joplin is hiring an Assistant Director of Curriculum for the College of Dental Medicine. This is an exciting opportunity for a dentist looking to step into academia.

This dental faculty member will provide leadership and oversight for the design, delivery, assessment, and continuous improvement of the Doctor of Dental Medicine (DMD) curriculum. As a licensed dentist and academic leader, the Assistant Director works in close collaboration with the Assistant Dean of Curriculum and Integrated Learning to ensure that the predoctoral program provides students with a rigorous, integrated, and competency-based educational experience.

The Assistant Director plays a pivotal role in preparing students for successful entry into patient care, fostering a culture of educational innovation, and ensuring that the DMD program maintains the highest standards of academic excellence and clinical relevance.

Essential Duties and Responsibilities:

Curriculum Leadership and Oversight

• Collaborate with the Assistant Dean to ensure the DMD curriculum is innovative, evidence-based, and aligned with institutional and CODA standards.
• Review, update, and approve course syllabi for accuracy, clarity, and integration across the curriculum.
• Guide the implementation of integrated learning strategies across biomedical, behavioral, and clinical science courses.
• Identify opportunities for curricular innovation and integration, and collaborate with the CDM team to implement them.

Assessment and Competency Development

• Oversee rubric development, review, and calibration processes for formative and summative assessments in both pre-clinical and clinical settings.
• Coordinate faculty calibration in grading and competency evaluation to promote fairness and consistency alongside the Assistant Director of Faculty Development.
• Monitor student progression toward achievement of program competencies, including analysis of reports, dashboards, and data-driven recommendations.
• Lead initiatives to assess the effectiveness of educational outcomes and implement continuous quality improvements.

Faculty and Administrative Support

• Serve as a resource and mentor to faculty in curriculum design, assessment, and educational best practices.
• Provide faculty development opportunities in competency-based education and assessment methodology.
• Assist the Assistant Dean in managing the operational responsibilities of the curriculum office, including scheduling, accreditation preparation, and policy development.
• Contribute to institutional reporting, strategic planning, and accreditation site visit preparation.
• Assume responsibility for didactic and clinical coverage as necessary to support programmatic and patient care needs.

Collaboration and Service

• Serve as a liaison between faculty, course directors, students, and academic leadership to facilitate curricular charge.
• Participate in relevant committees related to curriculum, assessment, student success, and accreditation.
• Support institutional initiatives in educational innovation, interprofessional education, and continuous quality improvement.

Qualifications:

Required:

• DMD/DDS degree from a CODA-accredited institution.
• Current licensure (or eligibility for licensure) in the United States.
• Preferred experience in academic dentistry with demonstrated involvement in teaching, curriculum design, and/or assessment.
• Knowledge of competency-based education, rubric development, and evaluation of clinical skills.
• Strong organizational, communication, and leadership skills.
• Commitment to student success, mentorship, and continuous program improvement.

Preferred:

• Advanced training in dental education, academic leadership, or health professions education (e.g., certificate, fellowship, or graduate degree).
• Experience with CODA accreditation standards, self-study preparation, and compliance processes.
• Demonstrated success in faculty development and educational innovation.
• Experience with educational technology, assessment platforms, or curriculum management systems.