Cae Reading Tips Jobs in Usa
3,922 positions found — Page 7
Controls & Integration Engineer II, Electrical
🏢 CPG
Salary not disclosed
Position:
Controls & Integration Engineer II, Electrical
Location:
19775 Belmont Executive Plaza
Suite 200
Ashburn, VA
Job Id:
921
# of Openings:
1
TITLE: Controls & Integration Engineer II, Electrical
LOCATION: Ashburn, VA
POSITION SUMMARY: Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including building management systems, power system automation and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customers' complex needs.
Specific areas of expertise for this position include power chain monitoring and control systems in Data Centers and /or mission critical environments. Experience in Electrical Power Monitoring Systems (EPMS) and field device configuration such as gateways, PLC, Meters, Relays, and SCADA/HMI software. Experience in Building Automation Systems (BAS) and configuration/programming of field controllers is beneficial.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
Managerial Responsibilities
QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
Computer/Networking Skills:
Certificates and Licenses:
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
* We Utilize E-Verify
#LI-TG1
Pay Range: $85,996 - $129,050 per year
Apply for this Position
Controls & Integration Engineer II, Electrical
Location:
19775 Belmont Executive Plaza
Suite 200
Ashburn, VA
Job Id:
921
# of Openings:
1
TITLE: Controls & Integration Engineer II, Electrical
LOCATION: Ashburn, VA
POSITION SUMMARY: Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including building management systems, power system automation and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customers' complex needs.
Specific areas of expertise for this position include power chain monitoring and control systems in Data Centers and /or mission critical environments. Experience in Electrical Power Monitoring Systems (EPMS) and field device configuration such as gateways, PLC, Meters, Relays, and SCADA/HMI software. Experience in Building Automation Systems (BAS) and configuration/programming of field controllers is beneficial.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
- Design / Engineering
- Assists Senior Engineers in design documents for SCADA/Automation projects
- Developing design document narratives
- Perform requirements analysis
- Understanding of Sequence of Operations (SOO) / System Functional Documentation
- Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
- Comment Resolution
- Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
- Review design document narratives
- Perform execution and design scope gap analysis
- Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
- Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
- Assist in reviewing project specifications
- Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
- Programming
- Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
- Testing / Troubleshooting / Deployment / Commissioning
- Assist senior engineers in creating and updating testing and commissioning procedures
- Preparation of test reports
- Originates test procedures
- Commissioning of deployed systems
- Development of test equipment and simulation devices
- Perform Factory and Field Testing
- Maintenance
- Perform troubleshooting on service calls to existing and legacy system operators
- Perform hardware / software upgrades and replacements on existing systems
Managerial Responsibilities
- Estimates
- Assists senior engineers in preparation of cost estimates and supporting documentation
- Work with relevant stakeholders to review scope of project
- Conduct any surveys, inspections, tours, etc. of client sites, as required
- Assists senior engineers in evaluation and pricing of change orders from vendors
- Personnel Management
- Assigns tasks and coordinates with Technical Staff
- Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
- Bachelor degree in electrical or mechanical engineering and 2-5 years field experience
- Associate degree in the electrical or mechanical field (add 3 years field experience)
- High school diploma (add 5 years field experience)
- 2-5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
- Experience in reading electrical and control schematics
- Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
- Experience in testing and troubleshooting control and protection systems
- Experience using basic electrical and hand tools
- Experience using testing, calibration, or industry-specific tools and software
- Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
- Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
- MUST BE A US CITIZEN
Computer/Networking Skills:
- Experience in OT and IT networking technologies and topologies
- Experience troubleshooting and diagnosing OT and IT networks and protocols
- Experience in CAD/CAE Software (Visio, AutoCAD)
- Experience in schedule management software (Project, Primavera P6)
- Standard Office Software (Microsoft Word, Excel, Access etc.)
Certificates and Licenses:
- Required Certifications
- Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
- Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
- Preferred Licenses / Certifications
- Design Build Institute of America (DBIA)
- Certified SCADA Security Architect (CSSA)
- Certified Automation Professional (CAP)
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
* We Utilize E-Verify
#LI-TG1
Pay Range: $85,996 - $129,050 per year
Apply for this Position
Not Specified
Controls & Integration Engineer I, Mechanical
🏢 CPG
Salary not disclosed
Position:
Controls & Integration Engineer I, Mechanical
Location:
Remote
Job Id:
917
# of Openings:
1
TITLE: Controls & Integration Engineer I, Mechanical
LOCATION: Dallas, TX
POTISION SUMMARY: Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including building management systems, power system automation and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customers' complex needs.
Specific areas of expertise for this position include monitoring and control systems in Data Centers and /or mission critical environments. Experience in Building Automation Systems (BASS) and field device configuration such as field level controllers, PLCs, protocol converters, and SCADA/HMI software. Experience in Electrical Power Monitoring Systems (EPMS) and configuration/programming of electrical gear interfaces is beneficial.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
Managerial Responsibilities
QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
Computer/Networking Skills:
Certificates and Licenses:
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
*We utilize E-Verify
#LI-TG1
Pay Range: $85,996 - $129,050 per year
Apply for this Position
Controls & Integration Engineer I, Mechanical
Location:
Remote
Job Id:
917
# of Openings:
1
TITLE: Controls & Integration Engineer I, Mechanical
LOCATION: Dallas, TX
POTISION SUMMARY: Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including building management systems, power system automation and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customers' complex needs.
Specific areas of expertise for this position include monitoring and control systems in Data Centers and /or mission critical environments. Experience in Building Automation Systems (BASS) and field device configuration such as field level controllers, PLCs, protocol converters, and SCADA/HMI software. Experience in Electrical Power Monitoring Systems (EPMS) and configuration/programming of electrical gear interfaces is beneficial.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
- Design / Engineering
- Assists Senior Engineers in design documents for SCADA/Automation projects
- Developing design document narratives
- Perform requirements analysis
- Understanding of Sequence of Operations (SOO) / System Functional Documentation
- Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
- Comment Resolution
- Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
- Review design document narratives
- Perform execution and design scope gap analysis
- Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
- Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
- Assist in reviewing project specifications
- Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
- Programming
- Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
- Testing / Troubleshooting / Deployment / Commissioning
- Assist senior engineers in creating and updating testing and commissioning procedures
- Preparation of test reports
- Originates test procedures
- Commissioning of deployed systems
- Development of test equipment and simulation devices
- Perform Factory and Field TestingMaintenance
- Maintenance
- Perform troubleshooting on service calls to existing and legacy system operators
- Perform hardware / software upgrades and replacements on existing systems
Managerial Responsibilities
- Estimates
- Assists senior engineers in preparation of cost estimates and supporting documentation
- Work with relevant stakeholders to review scope of project
- Conduct any surveys, inspections, tours, etc. of client sites, as required
- Assists senior engineers in evaluation and pricing of change orders from vendors
- Personnel Management
- Assigns tasks and coordinates with Technical Staff
- Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
- Bachelor's degree in electrical or mechanical engineering and 2-5 years field experience
- Associate degree in the electrical or mechanical field (add 3 years field experience)
- High school diploma (add 5 years field experience)
- 2-5 years' experience with designing and servicing controls systems for chiller plants, complex air distribution equipment, equipment installation, and testing
- Experience in reading mechanical and control schematics
- Experience in building automation systems (BAS) startup, configuration, and calibration
- Experience in testing and troubleshooting control systems
- Experience using basic electrical and hand tools
- Experience using testing, calibration, or industry-specific tools and software
- Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
- Experience with test equipment and test equipment software
- Experience with networking design, configuration, and troubleshooting
- Experience with air handlers, chiller plant systems and data center CRAC units
- Ability to travel up to 80%
- MUST BE A US CITIZEN
Computer/Networking Skills:
- Experience in OT and IT networking technologies and topologies
- Experience troubleshooting and diagnosing OT and IT networks and protocols
- Experience in CAD/CAE Software (Visio, AutoCAD)
- Experience in schedule management software (Project, Primavera P6)
- Standard Office Software (Microsoft Word, Excel, Access etc.)
Certificates and Licenses:
- Required Certifications
- Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, JCI, ALC, Distech, etc.
- Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
- Preferred Licenses / Certifications
- Design Build Institute of America (DBIA)
- Certified SCADA Security Architect (CSSA)
- Certified Automation Professional (CAP)
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
*We utilize E-Verify
#LI-TG1
Pay Range: $85,996 - $129,050 per year
Apply for this Position
Not Specified
Controls & Integration Engineer III
🏢 CPG
Salary not disclosed
Position:
Controls & Integration Engineer III
Location:
Jessup, MD
Job Id:
789
# of Openings:
1
TITLE: CONTROLS & INTEGRATION ENGINEER V
LOCATION: JESSUP, MD
*Salary Negotiable
POSITION SUMMARY:
Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including industrial controls and power controls and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customer's complex needs.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
Design / Engineering
Programming
Maintenance
Managerial Responsibilities
Estimates
Personnel Management
QUALIFICATIONS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
Computer Skills:
Certificates and Licenses:
* Required Certifications
* Preferred Licenses / Certifications
Supervisory Responsibilities:
* No supervisory responsibilities
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
CPG Participates in E-Verify
Learn more about CPG by checking out our website here
#LI-TG1
Pay Range: $98,891 - $148,392 per year
Apply for this Position
Controls & Integration Engineer III
Location:
Jessup, MD
Job Id:
789
# of Openings:
1
TITLE: CONTROLS & INTEGRATION ENGINEER V
LOCATION: JESSUP, MD
*Salary Negotiable
POSITION SUMMARY:
Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including industrial controls and power controls and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customer's complex needs.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
Design / Engineering
- Initiates design documents for small projects and in support of large programs
- Develops design documents narratives
- Performs requirements analysis
- Develops Sequence of Operations / System Functional Documentation
- Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
- Develops Specifications
- Performs QA/QC and technical reviews of designs
- Plans and Design Procedures and Equipment for Integrated Systems Factory Testing
- Comment Resolution
Mechanical-focused controls engineer (BAS/BMS)
- Experience on EPMS monitoring
- Certifications in Platforms (at least one), familiarity with any others preferred: Ignition, Aveva, Automated Logic, Siemens, Schneider EBO, Niagara N4, Iconics Gen64
- Experience with Federal Government controls projects (ICS/EMCS/UMCS) preferred
- Familiarity with Cisco network switch programming and design preferred
Programming
- Lead programming / configuration team efforts for complex automation and SCADA applications.
- Program / Configure / troubleshoot PLCs, RTUs, and/or HMI systems
- Testing / Troubleshooting / Deployment / Commissioning
- Author testing / commissioning procedures
- Preparation of test reports
- Originates test procedures
- Commissioning of deployed systems
- Development of test equipment and simulation devices
- Perform Factory and Field Testing
Maintenance
- Perform troubleshooting on service calls to existing and legacy system operators
- Perform hardware / software upgrades and replacements on existing systems
Managerial Responsibilities
Estimates
- Conducts any surveys, inspections, tours, etc. of client sites, as required
- Prepares cost estimates and supporting documents for small projects
- Perform hardware / software upgrades and replacements on existing systems
- Evaluation and pricing of change orders
Personnel Management
- Assigns technical tasks and coordinates with entry-level engineers
- Assigns tasks and coordinates with Technical Staff
QUALIFICATIONS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
- Experience in reading electrical and control schematics and plans
- Experience in control system startup, configuration, and calibration
- Experience in testing and troubleshooting control systems
- Experience using basic electrical and machinist hand tools
- Experience using testing, calibration, or industry-specific tools and software
- 3-7 years' experience
- Bachelor's degree in engineering or higher
- Associate degree (add 3 years)
- High school diploma (add 5 years)
- Must be a US Citizen
Computer Skills:
- Experience in computer networks
- Experience in CAD/CAE Software (Visio, AutoCAD)
- Experience in schedule management software
- Standard Office Software (Microsoft Word, Excel, etc.)
Certificates and Licenses:
* Required Certifications
- Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
- Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
* Preferred Licenses / Certifications
- Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
- Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
- Design Build Institute of America (DBIA)
- Engineer in Training (EIT) in relevant in field
Supervisory Responsibilities:
* No supervisory responsibilities
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
CPG Participates in E-Verify
Learn more about CPG by checking out our website here
#LI-TG1
Pay Range: $98,891 - $148,392 per year
Apply for this Position
Not Specified
Controls Project Manager II
✦ New 🏢 CPG
Salary not disclosed
Position:
Controls Project Manager II
Location:
19775 Belmont Executive Plaza
Suite 200
Ashburn, VA
Job Id:
937
# of Openings:
1
TITLE: CONTROLS PROJECT MANAGER II
LOCATION:
POSITION SUMMMARY:
The Controls Project Manager II is responsible for assisting an OTS Director in organizing our ongoing projects. This role involves monitoring project plans, schedules, work hours, budgets, and expenditures and ensuring that project deadlines are met on time. The Controls Project Manager II will assist with processes, procedures, management, and documentation needed for CPG's multiple data center infrastructure services.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
* Maintaining and monitoring project plans, project schedules, work hours, budgets, and expenditures.
* Documenting and following up on important actions and decisions from meetings.
* Preparing necessary presentation materials for meetings.
* Ensuring project deadlines are met.
* Determining project changes.
* Providing administrative support as needed.
* Undertaking project tasks as required.
* Developing project strategies.
* Ensuring projects adhere to frameworks and all documentation is maintained appropriately for each project.
* Assess project risks and issues and provide solutions where applicable.
* Chair and facilitate meetings where appropriate and distribute minutes to all project team members.
* Create a project management calendar for fulfilling each goal and objective.
* On-site project management as necessary, including but not limited to QA/QC checks on projects, deliverable inventory management, and safety protocol validation.
* MUST BE A US CITIZEN
Managerial Responsibilities
* Estimates
o Leads proposal efforts (Research / Cost Estimates / Proposal Documents) for medium to large projects
o Works with relevant stakeholders to review scope of project
o Conducts any surveys, inspections, tours, etc. of client sites, as required
o Prepares cost estimates and supporting documents for small projects
o Evaluation and pricing of change orders
* Divisional Management
o Actively follows emerging technical trends and contributes to Division leadership and guidance in area of practice
* Personnel Management
o Assigns technical tasks to engineers and administrative staff in support of projects
o Assigns technical tasks and coordinates with entry-level engineers
o Assigns tasks and coordinates with Technical Staff
QUALIFICATIONS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience (Desired):
* Bachelor's degree in engineering preferred
* 5 - 10 years
* Associate degree (add 3 years)
* High school diploma (add 5 years)
* Experience in reading electrical, telecommunications and control schematics and plans
* Experience in overseeing control system startup, configuration, and calibration
* Experience in testing and troubleshooting control systems
Computer Skills:
* Competency in Microsoft Office applications, including Word, Excel, and Outlook.
* Experience in Project Management Software (Project)
* Experience in CAD/CAE Software (Visio, AutoCAD)
Certificates and Licenses (Preferred):
* PMP Certification
Supervisory Responsibilities:
* No supervisory responsibilities with this position.
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
* Exposure to computer screens for an extended period of time, Occasionally, lift and/or move 10 to 15 pounds. Frequently required to sit, stand, walk, stoop, kneel, crouch or crawl; occasionally required to climb or balance. Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust and focus. Reach by extending hands or arms in any direction, finger dexterity, listen and understand information and ideas presented through spoken words and sentences. Communicate information and ideas in speaking so other will understand. Read and understand information and ideas presented in writing. Apply general rules to specific problems to produce answers that make sense.
*Salary Negotiable*
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG Participates in E-Verify
Pay Range: $98,891 - $148,392 per year
Apply for this Position
Controls Project Manager II
Location:
19775 Belmont Executive Plaza
Suite 200
Ashburn, VA
Job Id:
937
# of Openings:
1
TITLE: CONTROLS PROJECT MANAGER II
LOCATION:
POSITION SUMMMARY:
The Controls Project Manager II is responsible for assisting an OTS Director in organizing our ongoing projects. This role involves monitoring project plans, schedules, work hours, budgets, and expenditures and ensuring that project deadlines are met on time. The Controls Project Manager II will assist with processes, procedures, management, and documentation needed for CPG's multiple data center infrastructure services.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
* Maintaining and monitoring project plans, project schedules, work hours, budgets, and expenditures.
* Documenting and following up on important actions and decisions from meetings.
* Preparing necessary presentation materials for meetings.
* Ensuring project deadlines are met.
* Determining project changes.
* Providing administrative support as needed.
* Undertaking project tasks as required.
* Developing project strategies.
* Ensuring projects adhere to frameworks and all documentation is maintained appropriately for each project.
* Assess project risks and issues and provide solutions where applicable.
* Chair and facilitate meetings where appropriate and distribute minutes to all project team members.
* Create a project management calendar for fulfilling each goal and objective.
* On-site project management as necessary, including but not limited to QA/QC checks on projects, deliverable inventory management, and safety protocol validation.
* MUST BE A US CITIZEN
Managerial Responsibilities
* Estimates
o Leads proposal efforts (Research / Cost Estimates / Proposal Documents) for medium to large projects
o Works with relevant stakeholders to review scope of project
o Conducts any surveys, inspections, tours, etc. of client sites, as required
o Prepares cost estimates and supporting documents for small projects
o Evaluation and pricing of change orders
* Divisional Management
o Actively follows emerging technical trends and contributes to Division leadership and guidance in area of practice
* Personnel Management
o Assigns technical tasks to engineers and administrative staff in support of projects
o Assigns technical tasks and coordinates with entry-level engineers
o Assigns tasks and coordinates with Technical Staff
QUALIFICATIONS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience (Desired):
* Bachelor's degree in engineering preferred
* 5 - 10 years
* Associate degree (add 3 years)
* High school diploma (add 5 years)
* Experience in reading electrical, telecommunications and control schematics and plans
* Experience in overseeing control system startup, configuration, and calibration
* Experience in testing and troubleshooting control systems
Computer Skills:
* Competency in Microsoft Office applications, including Word, Excel, and Outlook.
* Experience in Project Management Software (Project)
* Experience in CAD/CAE Software (Visio, AutoCAD)
Certificates and Licenses (Preferred):
* PMP Certification
Supervisory Responsibilities:
* No supervisory responsibilities with this position.
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
* Exposure to computer screens for an extended period of time, Occasionally, lift and/or move 10 to 15 pounds. Frequently required to sit, stand, walk, stoop, kneel, crouch or crawl; occasionally required to climb or balance. Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust and focus. Reach by extending hands or arms in any direction, finger dexterity, listen and understand information and ideas presented through spoken words and sentences. Communicate information and ideas in speaking so other will understand. Read and understand information and ideas presented in writing. Apply general rules to specific problems to produce answers that make sense.
*Salary Negotiable*
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
Benefits to Joining Our Team
CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage
- Health Benefits - (Medical, Dental & Vision Insurance)
- Flexible Spending Account Options
- 401K Plan
- Employer paid Life & Disability Insurance
- Paid Time Off
- Employee Referral Program
- Employee Assistance Program (EAP)
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
Learn more about CPG by checking out our website here
#LI-TG1
CPG Participates in E-Verify
Pay Range: $98,891 - $148,392 per year
Apply for this Position
Not Specified
G
Electrical Engineer -Design Responsible Engineer
✦ New
Salary not disclosed
Job Title– Electrical Engineer (DRE)
Location: Novi, Michigan, USA
Job-Type: Full-Time
Job Summary
The Electrical Distribution System (EDS) Components Design Responsible Engineer (DRE) is responsible for the design, development, validation, and release of electrical distribution system components for Scout Motors’ all-electric pickup trucks and SUVs. The role involves managing component design from concept through production launch, collaborating with internal teams and suppliers, and ensuring compliance with safety regulations and engineering standards.
Key Responsibilities
1. Component Design and Development
- Design and develop all EDS components including:
- Shields
- Troughs
- Grommets
- Connectors and terminals
- Power distribution components
- Manage the full product lifecycle from concept design (clean-sheet development) through virtual development, testing, validation, and manufacturing launch.
2. Technical Specification & Sourcing Support
- Collaborate with Purchasing and Finance teams to develop detailed technical specifications.
- Support the quotation and sourcing process for EDS components.
- Work closely with suppliers to ensure components meet cost, timing, and quality targets.
3. Standards and Component Library Development
- Develop and maintain a standardized library of core EDS components aligned with global Volkswagen Group standards.
- Ensure components can be effectively integrated into vehicle wiring harness and power distribution systems.
4. Cross-Functional Collaboration
- Partner with VW Group module owners, internal engineering teams, and external suppliers to define and release EDS components.
- Foster a collaborative, high-performance engineering culture within the team.
5. Verification and Validation
- Conduct virtual simulations and physical testing for component verification.
- Participate in field testing and product validation activities to confirm performance and reliability.
6. Compliance and Safety
- Ensure all designs meet automotive safety standards and U.S. government regulatory requirements.
- Apply Six Sigma methodologies to improve product quality and solve engineering problems.
7. Manufacturing and Production Support
- Contribute to the design and development of production facilities for Scout electric vehicles.
- Support the transition of components from development to mass production launch.
8. Continuous Improvement
- Monitor consumer experience and feedback to identify potential system improvements.
- Proactively recommend enhancements to EDS systems and components.
Required Qualifications
Education
- Bachelor’s or Master’s degree in:
- Electrical Engineering
- Mechanical Engineering
- Systems Engineering
- Or a related engineering field.
Experience
- Minimum 5+ years of experience in:
- Electrical wire harness design
- Power distribution components design and release
- Automotive product development processes including design, testing, and production launch.
Technical Skills
- Strong expertise in:
- Wire harness component design
- Power distribution systems
- Six Sigma problem-solving methodology
- Familiarity with Computer-Aided Engineering (CAE) tools or relevant simulation technologies.
Not Specified
G
EDS Component Design Engineer
✦ New 🏢 Global Connect Technologies
Salary not disclosed
Job Title: EDS Component Design Engineer
Location: Novi, MI
Role Overview
We are seeking an experienced EDS Component Design Engineer to lead the design and development of electrical distribution system (EDS) components for next-generation electric pickup trucks and rugged SUVs. The role will involve full lifecycle responsibility from concept design through validation, testing, and manufacturing launch.
The ideal candidate will have strong expertise in wire harness components and power distribution systems, working closely with cross-functional teams including engineering, purchasing, finance, and suppliers to deliver high-quality automotive components.
Key Responsibilities
- Design and develop EDS components including shields, troughs, grommets, connectors, terminals, and power distribution components.
- Support development from concept (clean sheet design) through virtual validation, testing, sign-off, and manufacturing launch.
- Collaborate with purchasing and finance teams to create technical specifications for sourcing and supplier quoting.
- Develop and maintain a standard library of core EDS components aligned with global automotive standards.
- Work closely with VW Group module owners and suppliers to define and release wiring and power distribution components.
- Perform virtual and physical verification testing, including field testing.
- Ensure compliance with safety standards and U.S. regulatory requirements.
- Contribute to production facility design for electric trucks and SUVs.
- Manage supplier deliverables to meet cost, quality, and program timing targets.
- Identify opportunities to improve system performance and consumer experience.
Required Qualifications
- Bachelor’s or Master’s degree in Electrical Engineering, Mechanical Engineering, Systems Engineering, or related field.
- 5+ years of experience in automotive wire harness or power distribution component design.
- Strong expertise in EDS component design and release processes.
- Experience working across complete product development lifecycle (design, testing, launch).
- Knowledge of Six Sigma engineering methods for design and problem solving.
- Familiarity with CAE tools or computer-aided engineering environments.
- Strong collaboration skills with cross-functional teams and suppliers.
Preferred Skills
- Experience working in electric vehicle platforms or advanced automotive programs.
- Knowledge of automotive electrical architecture and power distribution systems.
- Ability to work in fast-paced product development environments.
Not Specified
A
Exterior Design and Release Engineer
✦ New
Salary not disclosed
Key Responsibilities
- Develop and support the design of exterior components and assemblies from concept through production using CAD. Ensure designs meet functional, aesthetic, and manufacturability requirements.
- Manage the release of production-ready parts, drawings, and Bills of Material (BOM) through PLM systems such as Teamcenter while supporting program milestones and engineering documentation.
- Work closely with suppliers on feasibility, design for manufacturing (DFM), tooling development, and technical reviews to ensure parts meet cost, quality, and timing targets.
- Support validation activities including DVP&R development, testing coordination, and design verification to ensure components meet durability, fit, finish, and performance standards.
- Partner with Styling, Studio, Manufacturing Engineering, CAE, and Program Management teams to ensure exterior components align with vehicle styling intent and production requirements.
- Support DFMEA development and manage engineering changes (ECR/ECO) to resolve design issues and improve product quality throughout the development cycle.
- Provide engineering support during prototype builds, pilot builds, and production launch to address fit, finish, and assembly concerns.
Required Qualifications
- Bachelor’s degree in Mechanical Engineering, Automotive Engineering, or a related engineering discipline.
- 3–8+ years of experience in automotive exterior trim design, development, or release engineering.
- Experience using CATIA V5/V6, or similar CAD software for 3D modeling and design development.
- Understanding of plastic injection molding, composite materials, tooling development, and painted exterior components.
- Experience with GD&T, DFMEA, DVP&R, and PPAP processes.
- Familiarity with automotive regulatory requirements such as NHTSA and FMVSS related to exterior vehicle components.
Not Specified
G
Automotive Electrical Engineer - EDS and Wire harness
✦ New 🏢 Global Connect Technologies
Salary not disclosed
Job Title– Electrical Engineer
Location: Novi, Michigan, USA
Job-Type: Full-Time
Job Summary
The Electrical Distribution System (EDS) Components Design Responsible Engineer (DRE) is responsible for the design, development, validation, and release of electrical distribution system components for Scout Motors’ all-electric pickup trucks and SUVs. The role involves managing component design from concept through production launch, collaborating with internal teams and suppliers, and ensuring compliance with safety regulations and engineering standards.
Key Responsibilities
1. Component Design and Development
- Design and develop all EDS components including:
- Shields
- Troughs
- Grommets
- Connectors and terminals
- Power distribution components
- Manage the full product lifecycle from concept design (clean-sheet development) through virtual development, testing, validation, and manufacturing launch.
2. Technical Specification & Sourcing Support
- Collaborate with Purchasing and Finance teams to develop detailed technical specifications.
- Support the quotation and sourcing process for EDS components.
- Work closely with suppliers to ensure components meet cost, timing, and quality targets.
3. Standards and Component Library Development
- Develop and maintain a standardized library of core EDS components aligned with global Volkswagen Group standards.
- Ensure components can be effectively integrated into vehicle wiring harness and power distribution systems.
4. Cross-Functional Collaboration
- Partner with VW Group module owners, internal engineering teams, and external suppliers to define and release EDS components.
- Foster a collaborative, high-performance engineering culture within the team.
5. Verification and Validation
- Conduct virtual simulations and physical testing for component verification.
- Participate in field testing and product validation activities to confirm performance and reliability.
6. Compliance and Safety
- Ensure all designs meet automotive safety standards and U.S. government regulatory requirements.
- Apply Six Sigma methodologies to improve product quality and solve engineering problems.
7. Manufacturing and Production Support
- Contribute to the design and development of production facilities for Scout electric vehicles.
- Support the transition of components from development to mass production launch.
8. Continuous Improvement
- Monitor consumer experience and feedback to identify potential system improvements.
- Proactively recommend enhancements to EDS systems and components.
Required Qualifications
Education
- Bachelor’s or Master’s degree in:
- Electrical Engineering
- Mechanical Engineering
- Systems Engineering
- Or a related engineering field.
Experience
- Minimum 5+ years of experience in:
- Electrical wire harness design
- Power distribution components design and release
- Automotive product development processes including design, testing, and production launch.
Technical Skills
- Strong expertise in:
- Wire harness component design
- Power distribution systems
- Six Sigma problem-solving methodology
- Familiarity with Computer-Aided Engineering (CAE) tools or relevant simulation technologies.
Not Specified
Engineering Manager - Computer Aided Simulation (U.S. Work Authorization Required)
✦ New
Salary not disclosed
Crown Equipment Corporation is one of the world’s largest material handling companies, with a reputation for award-winning product design, advanced engineering and technology, and superior after-sale service. Crown produces and sells a broad range of forklifts, batteries, chargers, automation and fleet management technologies that are revolutionizing the material-handling industry.
Job Responsibilities:
Lead the development, implementation, and performance of CAE, Simulation, FEA, Stability, and Structural Analysis tools that support validation of new and existing vehicles, systems, and components. Manage a team of engineers, guide technical decision‑making, and contribute directly to engineering solutions when needed. Reports to the Director or Senior Manager of Component Development.
- Product and Technology Champion - Lead development of new products and structural systems, approving technical solutions and driving innovation. Identify emerging technologies and competitive trends; recommend product, process, and tool improvements. Support Current Product Engineering, Service, Sales, Manufacturing, Purchasing, Quality, and Product Safety on issues related to masts, attachments, durability, and stability. Conduct product reviews to ensure competitive, innovative designs move to production.
- Project Planning, Supervision and Technical Review - Ensure engineering work meets product goals, industry standards, and sound engineering practices. Review and approve test results and production releases. Support budgeting, resource planning, and personnel decisions (hiring/termination).
- Employee Development - Perform duties such as creating/revising job descriptions, conducting Talent Development discussion sessions, rating performance, establishing/tracking goals and assisting in the completion of annual wage reviews. Responsible for coaching, motivating, mentoring, and developing direct reports to successfully take on additional responsibilities.
- Leadership and Communication - Ensure teams meet product, cost, and schedule targets. Collaborate with department leaders to resolve design direction, priorities, and resource needs. Communicate project and departmental updates to management via written and oral presentations. Perform other duties as assigned.
Minimum Qualifications:
- Bachelor degree in Mechanical Engineering, Aerospace Engineering, or related
- 16 years of product development experience, including mechanical design experience, project management, and supervision
- Skilled in finite element analysis (FEA), computer aided design (CAD), 3-D modeling, and simulation software; preferably Nastran, FEMAP, Simcenter, and NX CAD
- Good written, verbal, analytical, and interpersonal skills
- Ability to travel occasionally with overnight stays (0-5%)
- Valid driver license and reliable transportation to travel locally between company locations during scheduled workday
- Ability to learn operation of lift trucks
- Per 8-hour shift. Sit 8 hours and stand 0 hours. Both typical and non-typical office environment (low to moderate noise level, low exposure to hot/cold temperatures, dust, fumes, and vibrations). Regular interaction with others and performs a degree of independent work. Physical and mental demands are akin to the majority of office positions with prolonged periods of sitting and prolonged use of a computer/keyboard. Infrequent lifting, walking, and climbing stairs. Occasional use of office equipment (copiers, printers, etc.).
Preferred Qualifications:
- Working knowledge of the product series in lift truck design, industrial design and ergonomics
Work Authorization:
Indefinite U.S. work authorized individuals only. Individuals with temporary visas are ineligible. Sponsorship for work authorization, now or in the future, is unavailable.
No agency calls please.
Compensation and Benefits:
Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more.
EOE Veterans/Disabilities
Not Specified
K
Teamcenter SME
✦ New
Salary not disclosed
Job Title: Teamcenter SME / Solution Architect
Role Overview
We are seeking a highly experienced Teamcenter Subject Matter Expert / Architect to lead the design, implementation, and optimization of Siemens Teamcenter PLM solutions within the Mining and Energy sectors. The ideal candidate will combine deep technical expertise with industry-specific knowledge to drive digital transformation, streamline engineering workflows, and ensure scalable, sustainable PLM architecture.
Key Responsibilities
- Lead end-to-end Teamcenter solution architecture design, deployment, and integration.
- Collaborate with stakeholders to define PLM strategy, roadmap, and governance frameworks.
- Customize Teamcenter modules to align with Mining/Energy industry requirements (asset lifecycle, compliance, safety, sustainability).
- Provide technical leadership during implementation, ensuring best practices in configuration, data migration, and system performance.
- Conduct workshops, training, and knowledge transfer for engineering and IT teams.
- Partner with cross-functional teams to integrate Teamcenter with ERP, CAD, and other enterprise systems.
- Stay updated on PLM trends, Siemens advancements, and industry regulations to advise on continuous improvement.
Required Skills & Experience
- 10+ years of experience in PLM solutions, with at least 5 years in Teamcenter architecture/SME roles.
- Proven track record in Mining, Energy, Oil & Gas, or Utilities sectors.
- Strong expertise in Teamcenter modules (Workflow, BOM, Change Management, Requirements, Manufacturing).
- Hands-on experience with CAD/CAE integrations (NX, CATIA, SolidWorks, etc.).
- Knowledge of ERP integration (SAP, Oracle) and enterprise IT landscapes.
- Excellent communication, stakeholder management, and leadership skills.
- Ability to translate business needs into scalable technical solutions.
Preferred Qualifications
- Siemens Teamcenter certifications.
- Experience with cloud-based PLM deployments (AWS, Azure).
- Familiarity with digital twin, IoT, and Industry 4.0 applications in Mining/Energy.
Not Specified
jobs by
✓ All jobs loaded