Cable Remote Control App Jobs in Usa

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer, you will play a vital role in our commitment to excellence in aviation by ensuring the safety and quality of our aircraft. Your expertise will be essential as you meticulously verify parts and fasteners against stringent specifications, set up assembly tools, and align components based on engineering drawings and installation plans. In this dynamic environment, you will engage in the installation and rework of various interior parts and assemblies, enhancing both functionality and aesthetics. Your dedication to quality will shine through as you conduct thorough inspections of your work, ensuring compliance with our high standards and promptly addressing any discrepancies.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation

Position Responsibilities

• Review job assignments using bar charts, SOI, IP, and consult with leads to obtain necessary drawings.

• Locate work areas using drawings and electronic resources that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials for accuracy and suitability.

• Determine and obtain the correct fasteners from PCA/MMO control per specifications.

• Set up assembly tools according to tooling instructions, ensuring locators are correct for the model.

• Align and secure parts on the airplane using tooling holes and clamps, checking for proper margins.

• Install and rework interior parts and assemblies, including carpets, stowbins, and seats.

• Select and use appropriate drill bits, reamers, and countersinking tools for pilot and full-size holes.

• Drill, ream, and countersink holes in parts/assemblies per specifications and instructions.

• Disassemble parts, deburr holes, and prepare surfaces for fastener installation.

• Apply sealants, primers, adhesives, and corrosion-inhibiting compounds as required by specifications.

• Install fasteners in the correct sequence using appropriate tools, adhering to specifications.

• Mark and symbolize work for subsequent riveting and install cables and wire bundles as needed.

• Inspect completed work for defects, ensuring compliance with engineering drawings and report any job handicaps.

• Move kits, carts, and equipment within the work cell to facilitate workflow and maintain personal and tool certifications.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications

• 1+ years of experience in manufacturing, automotive, construction, aerospace or similar industry; this can include education and Military.

• 1+ years of experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using hand and power tools

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel.

• Ability to wear hearing protection (ear inserts, canal caps, earmuffs); eye protection.

• Ability to use hazardous chemicals.

Preferred Qualifications:

• 1+ years of experience installing aerospace components, construction or automotive assemblies with precision measurement tools, hand and power tools.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Pay : $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 15, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer, you will play a vital role in our commitment to excellence in aviation by ensuring the safety and quality of our aircraft. Your expertise will be essential as you meticulously verify parts and fasteners against stringent specifications, set up assembly tools, and align components based on engineering drawings and installation plans. In this dynamic environment, you will engage in the installation and rework of various interior parts and assemblies, enhancing both functionality and aesthetics. Your dedication to quality will shine through as you conduct thorough inspections of your work, ensuring compliance with our high standards and promptly addressing any discrepancies.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation

Position Responsibilities

• Review job assignments using bar charts, SOI, IP, and consult with leads to obtain necessary drawings.

• Locate work areas using drawings and electronic resources that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials for accuracy and suitability.

• Determine and obtain the correct fasteners from PCA/MMO control per specifications.

• Set up assembly tools according to tooling instructions, ensuring locators are correct for the model.

• Align and secure parts on the airplane using tooling holes and clamps, checking for proper margins.

• Install and rework interior parts and assemblies, including carpets, stowbins, and seats.

• Select and use appropriate drill bits, reamers, and countersinking tools for pilot and full-size holes.

• Drill, ream, and countersink holes in parts/assemblies per specifications and instructions.

• Disassemble parts, deburr holes, and prepare surfaces for fastener installation.

• Apply sealants, primers, adhesives, and corrosion-inhibiting compounds as required by specifications.

• Install fasteners in the correct sequence using appropriate tools, adhering to specifications.

• Mark and symbolize work for subsequent riveting and install cables and wire bundles as needed.

• Inspect completed work for defects, ensuring compliance with engineering drawings and report any job handicaps.

• Move kits, carts, and equipment within the work cell to facilitate workflow and maintain personal and tool certifications.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications

• 1+ years of experience in manufacturing, automotive, construction, aerospace or similar industry; this can include education and Military.

• 1+ years of experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using hand and power tools

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel.

• Ability to wear hearing protection (ear inserts, canal caps, earmuffs); eye protection.

• Ability to use hazardous chemicals.

Preferred Qualifications:

• 1+ years of experience installing aerospace components, construction or automotive assemblies with precision measurement tools, hand and power tools.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Pay : $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 15, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Build a Career That Matters with One of the World's Most Respected Employers!

- - - - - - - - - - - -

THE OPPORTUNITY

This opportunity is in Woodburn, Indiana in our BF Goodrich tire plant. Woodburn is a small town located about 30 mins east of Fort Wayne, IN. Fort Wayne is the cultural and economic center of northeastern Indiana and the second largest city in Indiana. Established in 1961, our plant makes passenger and light truck tires.

WHAT YOU WILL BRING

• The Electrical Engineer provides project management and technical support for the design and construction of electrical site work, utilities, and buildings. Education and work experience requirements

• BS Electrical Engineering for Design and Procurement Phases with 5+ years of experience on industrial projects preferred. Degree or Significant Experience for Industrial Construction and acceptance phases 5+ years of experience with degree or 10+ years of experience with field supervision on industrial projectsrequired.

• Professional Engineering License is a plus.

• Demonstrated leadership experience.

• Demonstrated strong organizational skills and project management ability.

• Strong skills in written and verbal communication.

• Demonstrated ability to set and achieve goals with minimum supervision and the ability to suggest and implement ideas to bring value to the team.

• Demonstrated solid teamwork, communication, and planning skillsrequired.

• Demonstrate good understanding of electrical designs and practices for medium and low voltage distribution systems, building power, emergency power and lighting distributions, fire detection, data and networking,intrusionand access control, BMS controls and automation, lighting protection systems,groundingand bonding.

• Software Proficiency Requirements: Microsoft Excel, Project, Word.

• Completed 10-hour OSHA safety training.

• Demonstrate a professional attitude by treating each person with respectonthe job.

WHAT YOU WILL DO

1 - Design Phase

a) Work with the design teamdailyto answer questions, monitor the design, and evaluate progress.

b) Participate in design reviews at 30%, 60%, 90%, and final detail design review and IFC documentation.

c) Participate in 3D Model conflict resolution by disciplines.

d) Participate in the analysis of design proposals as part of the Michelin Design Team under the direction of the Michelin Design leader.

e) Conduct analysis and provide weekly reports concerning the proposed technical solutions, costs, staffing plan, completion schedule,permittingplans, and other details provided by each EPC. Evaluate and grade the proposals providing recommendation to Michelin.

f) Provide a risk analysisforthe technical concepts for all systems and equipment.

g) AssistMichelin with change management by evaluating technical solutions, completing estimates, providing a riskanalysisand supporting the procurement manager as needed with information.

2 - Procurement Phase

Review material and construction packages with the EPC company prior to issue. Provide a report concerning the quality of the package and adherence to the contract requirements.

b) Review the top 2 responses to each procurement package. Provide a report concerning the quality of the package and adherence to the contract requirements.

c) Review material and equipment shop drawings after review by the EPC company. Provide a report concerningthe adherenceto the contract requirements.

3 - Construction Phase

a) Participate in pre-construction meetings and provide input and comments to the meeting to add value to the construction process.

b) Planning for construction and authorization to start construction.

c) Validatereadiness of GC and subs for task execution based on preplanning action list.

d).Finalizea workscope and schedule with Site management.

e). Setup safety work expectations with GC and subs

f). Setup QA and task acceptance expectations with GC and subs.

g).FinalizeandapproveSchedule targets for GC and subs. Supplement schedule with the risk matrix and recovery plans.

h) Authorization to start construction.

c) Determine a construction material testing programin syncwith the construction activity. Quality testing concerning equipment testing, cable testing, welding, etc. must be considered in the testing plan.

d) Manage the on-site operations of the quality test technicians who will execute the quality testing plan. Following NETA testing guidelines. Receive and analyze testing reports. Takeactionsto minimize schedule impact if a test does not pass.

e) All activities will havean initialinspection conductedperthe pre-construction meeting. Witness the work and approve of the methods andthe final result. Work with the contractor on the remedies and deficient items.

f) Afterinitialinspection and approval of method and results confirm that all work will match theinitialinspection requirements. Monitor andobservethe quality of the work and drive corrections and punch list process to achieve the correct level of quality.

g) Make observations concerning the work methods, equipment, rigging, etc. used on site by the contractor.Record violations of Michelin rules, regulations, goodpractices. Makecorrections asnecessary in the field. Special focus shall be made on fall protection, rigging, Lockout, Tagout, Tryout, Arc flash safety, shock hazard protection, and welding.

h) AssistMichelin with change management by evaluating technical solutions, completing estimates, providing a riskanalysisand supporting the procurement manager as needed with information.

i) Track system installation versus major milestones andidentifyconflicts and risks of late milestone completion.

j) Answer RFI's, evaluate Change Orders as delegated by theteamleader. Participate in project reviews withMichelinProject Team.

k) Attend weekly contractormeetingsand weekly Safetymeetings.

4 - Final Completion and Acceptance

a) Evaluate the design documents and make acceptance filesin accordance withMichelin direction.

b) Ensure the contractor develops a punch list and corrects all items in preparation for building acceptance.

c) Inspect the completed areas and record acceptance or non-acceptance on the documents. Drive the contractor to complete the non-accepted items to meet the contract completion dates.

d) Coordinate with Michelin Construction, safety, environmental, and maintenance and includetheir representativesand comments in the final acceptance process and documents.

e) Verify as built drawings. Check all drawings against physical installation. Note items where the as built is not correct and drive the EPC contractor to properly complete theas-builtdrawings.

#LI-RM1

#LI-HIRINGMICHELIN

Ready to Shape the Future of Innovation?

Michelin is building a world-leading manufacturer of life-changing composites and experiences. Pioneering engineered materials for more than 130 years, Michelin is uniquely positioned to make decisive contributions to human progress and a more sustainable world. Drawing on its deep know-how in polymer composite materials, Michelin is constantly innovating to manufacture high-quality tires and components for critical applications in demanding fields as varied as mobility, construction, aeronautics, low-carbon energies and healthcare.

The care placed in its products and deep customer knowledge inspire Michelin to offer the finest experiences. This spans from providing data- and AI-based connected solutions for professional fleets to recommending outstanding restaurants and hotels curated by the MICHELIN Guide.

Why Michelin?

• Career Growth: Personalized development plans, mentorship, and cross-functional opportunities. Unique career paths and opportunities for advancement.

• Inclusive Culture: Thrive in a diverse, supportive environment where your competencies, contributions and behaviors are recognized. Option to join one of our Connected Communities.

• Innovation-Driven: Work on projects that matter-from sustainable materials to digital transformation.

• Community Impact: Be part of a company that does what's right. We use sustainable business practices while balancing the needs of our customers and communities.

Michelin provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. Consistent with these obligations, Michelin also provides reasonable accommodations to employees and applicants with disabilities and for sincerely held religious beliefs. If you need accommodation for any part of the employment process because of a disability, please contact us at .

This position is not available for immigration sponsorship.

We build the future with people like you. Begin your career with Michelin today!

Are you a Chassis Designer Engineer looking for a new challenge and an opportunity to further advance your skills and career in a great working environment? Join our fast-growing team supporting leading Aerospace companies! If you are a highly motivated individual, a self-starter with an entrepreneurial spirit and a genuine interest in technology, we have the perfect job for you!

The Role

The I&C chassis designer works within the I&C Technology team and is responsible for designing and implementing supporting structures to mount I&C electronic hardware for safety related systems at Power Plants. Typically, they would have an Engineering degree. The I&C Technology team has strong interfaces with electronic hardware design and qualification testing teams. This role requires technical problem solving, strong design skills, understanding of codes and standards, and effective communication/collaboration with other teams.

Applicants must be US Citizen or Permanent Resident. Remote with 10% travel to Wilmington, NC.

Roles & Responsibilities:

• Understanding system requirements, including EMC, Seismic, and other applicable standards.

• 2D / 3D modeling of Instrumentation and Controls chassis and other misc. electrical equipment

• Understanding of electrical schematics, connector panel design, wire harness design, cable routing design.

• Connector selection and design.

• Performing integration testing of the design and documenting test results.

• Performing Verification of Design Specifications and Reports.

• Engage customers to define scope, review results, and discuss technical risks.

• Work with Tech Leads to establish an effective work plan, including time estimates, schedule estimates, requirements and work processes.

• Apply engineering fundamentals and 1st order engineering principles to establish and/or confirm expected performance.

• Provide clear and complete analysis documentation in accordance with GE engineering procedures.

• Manage time effectively to provide quality deliverables within the expected project timeline.

• Communicate effectively to leadership the status of work activities.

• Effectively manage multiple priorities.

Required Skills (Technical Competency):

Bachelor’s degree in mechanical, electrical, or related engineering degree from an accredited college of university.

• 4-6 years of experience

• Knowledge of common 2D / 3D drawing programs.

• Experience with coding conventions, unit testing and integration testing of control cabinets and chassis.

• Minimum 5 years of experience in field.

• US Citizen or Permanent Resident required

Additional Desired Characteristics

• Solves technical challenges through application of common design patterns and identifying appropriate patterns for use in problem solving.

• Inventor experience (including Vault)

• AutoCAD experience.

• Experience understanding coding standards that meets and delivers desired functionality using technology selected for the project.

• Excellent written and verbal communications skills and ability to articulate clearly.

• Contributes to creative solutions and challenges status quo.

• Proactively learns new tools and identifies opportunities for improvement and promotes their adoption.

Physical Requirements & Work Environment:

• Mostly Office Environments, Occasional Shop Floor involvement.

• Substantial amounts of telephone and computer work.

• Heavily Regulated Industries with strict adherence to procedures.

• Flexibility to meet business deadlines by staying late or arriving early.

• Typical 8 hour days plus lunch / 40 hour weeks / core (required) hours are 9AM to 4PM

• Ability to use personal transportation to visit customer locations.

• Due to the nature of the work, all candidates must be a U.S. Citizen or Permanent Resident.

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

We are looking for humble geniuses, who believe that engineering has the potential to make the impossible, possible; innovators, who are not only inspired by technology and innovation, but also perpetually driven to design, develop, and test as a trusted partner for Fortune 500 customers.

As a team of remarkably diverse engineers, we recognize that what we are really engineering is a brighter future for us all. If you want to contribute to meaningful work and be part of an organization that truly believes when you win, we all win, and when you fail, we all learn, then we’re eager to hear from you.

The achievers, high performers, and courageous challenge-crushers we seek, have the following characteristics and skills:

Engineering Technician - Product Engineering Support

Milan, IL

24 months (can extend)

Pay rate: $28/ hours on w2

Someone working as an automotive technician or electrical technician would be a good target. They can teach some of the testing and reading of schematics if needed. Candidates must be familiar working with the tools/machinery.

MAJOR PURPOSE:

Working in the Accelerated Design Verification (ADV) group to provide project support performing test setup, monitoring, inspection, and reporting using procedures and criteria set forth in the test plan. This is a 3rd shift position. (10p-6:30a).

MAJOR DUTIES:

Assembly of test rigs based on layout drawings and setup instructions. This includes:

Mechanical assembly using hand tools and battery/air impact wrenches

Use of overhead cranes

Connecting hydraulic plumbing

Connecting electrical control cables

Requires bending, kneeling, working at floor level

Must be able to lift 25 lbs

Document any changes to the setup procedure and layout drawings for continuous improvement.

Monitor and adjust test controls as necessary to keep the tests running efficiently.

Perform test specimen inspections and make repairs as required by the defined test parameters.

Document all test related incidents and activities using a web-based application.

Contact the appropriate personnel as required to prevent safety issues, environmental issues, and failures to test equipment or specimens and perform emergency shutoff procedures if necessary.

Perform routine lab maintenance and cleaning. Including, but not limited to, mopping, vacuuming, organizing, and putting away tools/equipment in the lab.

Pick up parts from the Parts Distribution Center and perform various other errands.

PREFERRED BACKGROUND

Experience working on machinery (tear down and repair), mechanic/mechanical background

Knowledge of Windows file/folder structure and how to copy/move/rename files

Good computer skills with Microsoft Office

Ability to read dimensioned part drawings and test layout drawings

Ability to work independently

Experience with servo-hydraulic or hydraulic systems preferred, but not necessary

About US Tech Solutions:

US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

COMPANY OVERVIEW

JTI is a growing, progressive, and team-oriented company rooted in family values. We know that our employees are our number one asset. We not only encourage, but foster an environment that promotes professional growth, internal promotions, continuing education, and a safe work environment.

We are proud to employ a team of dedicated professionals with expertise in electrical construction, mechanical fabrication and installation, engineering, and controls and automation fields who are leaders in their disciplines. We strive to be an excellent strategic partner for clients, providing solutions and adding value to their businesses.

POSITION OVERVIEW

The Journeyman Electrician is responsible for the installation, maintenance, and repair of electrical systems in residential, commercial, and industrial environments. This role requires a deep understanding of electrical systems, blueprints, safety codes, and regulatory compliance. The ideal candidate will possess strong troubleshooting skills, attention to detail, and the ability to work independently or as part of a team.

PRIMARY RESPONSIBILITIES

• Perform site survey activities with a team and independently
• Perform routine maintenance on electrical wiring and systems
• Review job installation plan with the Crew Lead
• Assist in tracking inventory for each project
• Troubleshoot, test, repair and service technical equipment
• Troubleshoot motor and control systems
• Install and repair electrical equipment and fixtures
• Install various types of raceway and cable tray systems
• Adhere to all quality and safety codes
• Clean up the job site

QUALIFICATIONS

EDUCATION and/or EXPERIENCE:

• Journeyman/Journeywoman Electrician License
• Minimum 5 years of electrical experience
• Proficient knowledge of installation of PVC coated rigid conduit systems
• Able to lead a crew of various sizes ranging from 2 – 5 people
• Strong problem solving and critical thinking skills
• Must be able to pass a pre-employment drug screen
• Familiarity with electrical equipment and hand tools
• Familiarity with electrical schematics, blueprints, and manuals

EQUIPMENT & APPLICATIONS /WORKING CONDITIONS & PHYSICAL DEMANDS:

• Lifting and Carrying – Frequently lifting and carrying tools, materials, and equipment, often weighing up to 25-50 lbs.
• Climbing and Balancing – Using ladders, scaffolding, and lifts to reach high areas for wiring and fixture installations.
• Crouching and Kneeling – Working in tight spaces like crawlspaces, attics, and vaults.
• Standing for Long Periods – Spending hours on their feet while wiring or troubleshooting.
• Repetitive Movements – Engaging in repeated motions such as twisting, bending at the waist, kneeling, stripping wires, twisting connections, and using hand tools continuously
• Working in Uncomfortable Positions – Holding tools or equipment overhead, reaching into confined areas, or maintaining awkward postures.
• Exposure to Weather – Working outdoors in extreme heat, cold, rain, or wind
• Hand and Finger Dexterity – Grasping objects with the use of fingers, palm and wrists to hold/and or manipulate objects (hammers, saws, pencils, pens, etc.)
• Pulling and Pushing – Pulling wires through conduits or pushing heavy equipment into place.
• Carrying Personal Protective Equipment (PPE) – Wearing and carrying safety gear like hard hats, gloves, harnesses, and boots.

MINIMUM EQUIPMENT REQUIREMENTS (General Overview)

Hand Toolso

• Needle-nose pliers
• Side-cutting pliers (Lineman's pliers)
• Diagonal-cutting pliers
• Tongue-and-groove pliers (Channellock’s)
• Wire strippers

Screwdriverso

• Flathead screwdrivers (various sizes)
• Phillips head screwdrivers (various sizes)
• Insulated screwdriver set

Wrenches

• Adjustable wrenches (various sizes)
• Combination wrench set
• Allen wrench set (Hex keys)

Saws and Cutting Tools

• Hacksaw
• Drywall saw
• Utility knife

Measuring and Marking Tools

• Tape measure
• Level (torpedo level)

Conduit Tools

• Conduit reamer

Miscellaneous Tools

• Hammer
• Fish tape
• Torpedo level
• Multimeter or voltage tester
• Flashlight or headlamp
• Tool pouch – Belt – or backpack for Tool mobilization