Cable Comm Jobs in Usa

Job Summary

Reporting to the Installation Manager the HVAC/R Installation Technician is responsible for install ventilation, air conditioning, refrigeration systems and equipment; inspect and perform tests on systems and equipment at start-up to assure proper functioning. This position has constant contact with the Project Managers and Sales Engineers to receive installation detail and communicate project requirements and results. This position has frequent contact with customers, requiring reasonable tact and strong verbal/written communication skills.

Responsibilities

Customer Service

• Always present a professional positive and helpful attitude when interacting with customers and co-workers.
• Exhibit an understanding of Human Relations and functions as a “team player”.
• Observe additional maintenance needs requiring attention and report to the appropriate people.

Work Condition and Paperwork

• Organize all work detail (work performed, service recommendations, etc.) and complete an accurate work ticket for billing and payroll purposes. Submit all paperwork to the office each Monday before 10:00 AM or at end of each month is required.
• Obtain, record on work ticket and communicate to vendor an appropriate purchase order number when purchasing job-related parts and supplies.

Essential Functions

• This is a physically demanding job involving heavy physical labor, often in adverse conditions and uncomfortable positions.
• Loads van with equipment and tools and drives van to and from job sites.
• Moves equipment (such as furnaces, compressors, blowers, heat pumps, heat exchangers, duct work, pipes and cables, controls, etc.), supplies and tools (hand and power) to designated areas of job sites.
• Perform associated plumbing and electrical work including making terminal connections.
• Must be able to perform all job activities at heights, working off ladders, scaffolds, roofs, platforms, etc.

Job Qualifications

• Must have valid Michigan drivers’ licenses, good driving record (our insurance must accept you)
• High school diploma or GED preferred
• Read and write English
• Write legibly
• Read a tape measure, perform basic math skills: (Add, Subtract, Fractions, Calculate sales tax)
• Paperwork filled out properly daily.
• Follow verbal and written instructions.
• Follow all safety rules and procedures.
• Be able to wear all P.P.D’s when applicable (steel toe boots, gloves, safety glasses, hard hat, etc.)
• Must be able to wear respirator.
• Lift, climb, bend, and kneel to complete assigned tasks.
• Tolerate working at heights off a ladder or scaffold, on roofs, aerial lifts, etc.
• Perform heavy physical labor during adverse weather conditions.
• Work in confined spaces, exposed to fumes, chemicals, grease, acids, oil and in the vicinity of noise and vibration with proper P.P.D’s.
• Maintain cooperative and effective working relationship with others.
• Be available to work any time of the day to take care of your customer. (Before 8:00 am and after 5:00 pm during the week, any time weekends and holidays)
• 4 hours safety training required annually
• Must have refrigerant transition and recovery certification card (levels 2-3)
• Continuing education is expected.

Physical Requirements

• Lift 50 lbs. frequently, 100 lbs. occasionally, and 100+ lbs. with assistance
• Climbing (ladders, stairs, etc) (frequently with tools or equipment in hand)
• Bending, stooping, twisting, and squatting
• Extended periods of walking
• Regular exposure to weather conditions
• Operating a motor vehicle, Hi-low, forklifts, etc.
• Owning and operating power or hand tools-from floor to above head (drilling often over your head and/or awkward positions)
• Exposure to potentially harmful chemicals or materials with proper P.P.D’s

Non-essential duties and responsibilities

• Performs other duties as assigned by management

List the core duties and responsibilities of the Journeyman Lineman. Use bullet points for clarity and readability. Be comprehensive but concise, covering tasks such as:

• Construction and maintenance of power lines: Mention both overhead and underground systems.
• Operation of vehicles and heavy machinery: Highlight specific equipment like bucket trucks, backhoes, and trenchers.
• Working with high and low voltage lines: Emphasize the safety protocols required for energized work.
• Installation and replacement of electrical components: Include transformers, switches, conductors, and more.
• Substation maintenance: Describe tasks related to substation equipment, troubleshooting, and repairs.
• Troubleshooting and system maintenance: Explain the lineworker's role in identifying and rectifying power system abnormalities.
• Safety and equipment maintenance: Stress the importance of adherence to safety standards and equipment upkeep.
• Leadership and training: Mention the opportunity for experienced linemen to lead and train junior team members.
• Regulatory compliance: Highlight adherence to OSHA rules, APPA Safety Manual, and company Standard Operating Procedures.

3. Job Requirements

• Supervision and Reporting: Describe the reporting structure, such as working under the general supervision of the Electric Operations Supervisor. Mention that the position is non-exempt from overtime provisions.
• Working Conditions: Explain the working conditions, including the physical nature of the job, risks, and requirements for personal protective equipment (PPE). Mention participation in the on-call rotation and residency requirements.
• Physical Requirements: Provide detailed information about the physical demands of the job, including lifting, climbing, and vision and hearing requirements.

Other examples:

• Relevant work experience as a Lineman, Class A Lineman, Class B Lineman, First Class Power Lineman, or Cable Splicer with current certification or documentation
• Experience with underground line work, including URD, fault location and repair, and switching
• Strong Lineman underground craftwork skills, including inline splices, terminations and elbows
• Ability to read circuit maps
• Basic computer skills and entry level proficiency with MS Office applications (Outlook, Word, Excel, internet/web)
• Understanding of basic construction skills
• Strong mechanical skills

4. Qualifications

List the educational and experience qualifications necessary for the role. Highlight the minimum requirements, preferred qualifications, and any additional certifications or training. In this example, a diploma, four years of verifiable experience as a Journey Lineworker, and relevant certifications are required.

Have TDLR

5. Special Requirements

Include any special requirements, such as possessing a valid commercial driver's license (CDL) and passing drug and alcohol screenings. Emphasize the importance of meeting these requirements for safety and regulatory compliance.

6. About the Company & Benefits

End the job description with a brief overview of your organization. Highlight your company's commitment to equal opportunity employment and mention any unique benefits, such as a family-friendly culture, compensation, and career development opportunities.

BE SURE TO APPLY ON OUR WEBSITE:

Job Title: Electrical QA Inspector – Semiconductor Manufacturing (Fab Project)

Location: Manassas, VA

Project: Large-Scale Semiconductor Manufacturing Facility

About the Project

We are supporting a major semiconductor manufacturing expansion in Manassas, contributing to one of the most advanced fabrication (fab) environments in the United States. This high-profile project involves complex electrical systems, cleanroom infrastructure, and mission-critical power distribution systems essential to semiconductor production.

Position Summary

We are seeking an experienced Electrical QA Inspector with semiconductor or high-tech manufacturing experience to support a large-scale fab construction project. This role is responsible for ensuring all electrical installations meet project specifications, NEC requirements, industry standards, and client quality expectations.

The ideal candidate will have experience in mission-critical facilities, cleanroom environments, or semiconductor fabs and a strong understanding of electrical quality control processes in large industrial construction projects.

Key Responsibilities

• Perform quality assurance inspections of electrical installations including:
• Medium- and low-voltage power distribution systems
• Switchgear, transformers, and UPS systems
• Cable tray, conduit, and grounding systems
• Cleanroom electrical systems and specialty equipment feeds
• Verify installation compliance with:
• NEC and applicable codes
• Project drawings and specifications
• ITPs (Inspection & Test Plans)
• Conduct field inspections and document findings through QA reports
• Coordinate with contractors, engineers, and project management teams
• Witness and document testing and commissioning activities
• Track deficiencies, manage punch lists, and verify corrective actions
• Support turnover documentation and system handover processes

Required Qualifications

• 5+ years of electrical QA/QC inspection experience in industrial or mission-critical construction
• Electrical journeyman, Master Electrician, or Electrical Engineer.
• Semiconductor fab, cleanroom, or data center project experience preferred
• Strong knowledge of NEC and electrical construction standards
• Ability to read and interpret electrical drawings and specifications
• Experience with submittal reviews, RFIs, and change documentation
• Strong documentation and reporting skills
• OSHA 10 or 30 certification preferred

Job Title: Hardware Technician

Location: Novi, MI

Job Type: Long-Term

Job Summary:

We are seeking a detail-oriented and hands-on Hardware Technician to support hardware test bench setup, maintenance, and integration activities. The ideal candidate will have strong experience in electronics hardware environments, with the ability to install, troubleshoot, and maintain test systems while collaborating closely with engineering teams.

Key Responsibilities

• Install, wire, and configure hardware test benches according to engineering specifications and safety standards
• Perform routine maintenance, troubleshooting, and repair of test bench components and equipment
• Assist engineering teams with hardware integration, diagnostics, and validation testing
• Support calibration and functional verification of electronic test systems
• Maintain inventory of tools, components, and lab equipment
• Document test configurations, procedures, maintenance activities, and issue resolutions
• Ensure compliance with lab safety protocols and maintain a clean, organized workspace
• Work independently and collaboratively within cross-functional teams

Required Qualifications

• Associate’s degree or technical certification in Electronics, Electrical Engineering Technology, or a related field
• Minimum 2 years of experience in hardware setup, lab support, or electronics test environment
• Hands-on experience with wiring, soldering, crimping, and cable assembly
• Proficiency in using diagnostic tools such as multimeters and oscilloscopes
• Strong troubleshooting and problem-solving skills
• High attention to detail and documentation accuracy
• Ability to work in a fast-paced engineering environment

JOB SUMMARY

Master Technology Group (MTG) specializes in designing, installing, and servicing low-voltage commercial property technologies across local and national markets.

The Integrated Security Systems Technician (Traveling) provides customer-focused, workplace technology support to clients, field staff, installation partners, and internal team members. While most support work is performed remotely, occasional on-site assistance may be required locally and nationally.

Supported systems are primarily security-related, including video surveillance, access control, intrusion detection, and EAS. Additional support may encompass network programming, fire alarm systems, data infrastructure, AV, and other low-voltage disciplines.

An MTG Integrated Security Systems Technician must deliver exceptional customer service and cultivate strong professional relationships with clients, vendors, Local Service Partners (LSPs), and colleagues. This role requires technical proficiency, extensive knowledge of low-voltage systems, excellent organizational and multi-tasking skills, and strong verbal and written communication abilities.

Candidates must reside in the Twin Cities area and are expected to perform most of their work from our Eden Prairie, MN office. Periodic job site responsibilities may be required locally and nationally, with travel up to 60% supporting client sites, installations, and service operations.

To assist with critical service issues, the role includes on-call duties as part of daily responsibilities, requiring availability after hours on weekdays. Weekend on-call shifts will be rotated on a scheduled basis to ensure support during urgent weekend needs.

This position reports to the Manager of Technical Services.

KEY DUTIES AND RESPONSIBILITIES

• Support customers, coordinators, field technicians, and project managers with technical advice, troubleshooting, and resource allocation
• Collaborate with Business Development and Operations to provide pre-sales and post-sales support for MTG solutions and systems
• Deliver remote and hands-on training to field personnel to ensure compliance with all applicable codes, client specifications, and MTG’s quality standards
• Serve as an escalation point for troubleshooting, programming, maintaining, and servicing client systems
• Pre-program, build, and stage equipment for installation when practical, to streamline on-site setup
• Provide remote and on-site programming and commissioning for client systems
• Conduct remote and on-site quality assurance audits to verify system performance and installation standards
• Assist installation, service, and coordination teams with technical planning, issue resolution, and commissioning, ensuring systems operate as intended and meet MTG quality standards
• Provide user training to client representatives
• Provide technical training to field personnel and colleagues
• Contribute to continuous improvement initiatives by providing feedback to management on processes, efficiency, and client satisfaction
• Deliver outstanding customer service and build strong, professional relationships with clients, vendors, partners, and colleagues
• Other duties to support the company vision and goals as requested

QUALIFICATIONS

• Minimum of 5 years of field experience installing, configuring, programming, and servicing video, access control, and intrusion systems
• MN Power Limited Technician License (PLT) required
• Field experience with low-voltage cabling, data infrastructure, fire alarms, EAS, DAS, AV, and other workplace technology systems is advantageous
• Proven ability to design, configure, and program a variety of security-related systems
• Demonstrated experience in delivering user training to client representatives and technical training to field personnel
• Industry certifications such as NICET Video Security Systems Technician, ESA certifications, or equivalent are preferred
• Manufacturer certifications such as Axis Network Video, Milestone, Genetec, Exacq, Bosch, KeyScan, Avigilon, Lenel S2, March Networks, or Open Options are preferred
• Strong interest and motivation to pursue ongoing education and additional certifications
• Solid familiarity with the National Electrical Code (NEC)
• Ability to meet travel and on-call requirements for the position
• Excellent time management and organizational skills
• Strong problem-solving and decision-making capabilities
• Ability to multitask effectively in a fast-paced, multi-project environment
• Proficiency in Windows-based computer environments, including MS Office (Outlook, Excel, Word) and other standard software
• Excellent written and verbal communication skills

PERFORMANCE MEASUREMENTS

• Demonstrates a clear understanding of the key duties and responsibilities of the position
• Shows enthusiasm and effort to perform all aspects of the role effectively
• Exhibits competence and capability to execute key duties and responsibilities efficiently
• Consistently meets expected standards of quality and customer satisfaction
• Completes assigned tasks promptly and adheres to project deadlines
• Represents MTG in a professional manner at all times, embodying the company’s standards of conduct
• Demonstrates sound decision-making through practical analysis, effective problem-solving, and good judgment
• Maintains effective working relationships and collaborates well within a team environment
• Communicates clearly and professionally, both verbally and in writing, including emails, reports, and correspondence
• Demonstrates reliability through consistent attendance, punctuality, and timely completion of tasks
• Embodies MTG’s Core Values:
• People First: Demonstrates humility, helpfulness, and genuine care for others
• Above and Beyond: Exhibits a “whatever it takes” mindset, actively contributing beyond minimum expectations
• Sense of Urgency: Responds promptly and diligently to organizational and client needs
• Team Player: Demonstrates respect, support, and collaboration, sharing expertise generously
• Do the Right Thing: Operates with honesty, integrity, transparency, and strong ethical standards

COMPENSATION AND BENEFITS

Base Salary $85,000 - $110,000+ DOQ

Car Allowance

Phone Stipend

Medical, Dental & Vision Insurance

401k Match

PTO

Nice Healthcare

Life Insurance – Company-provided

STD / LTD – Company-provided

Employee Referral Bonus

Development Opportunities

Engineering Technician - Product Engineering Support

Milan, IL

24 months (can extend)

Pay rate: $28/ hours on w2

Someone working as an automotive technician or electrical technician would be a good target. They can teach some of the testing and reading of schematics if needed. Candidates must be familiar working with the tools/machinery.

MAJOR PURPOSE:

Working in the Accelerated Design Verification (ADV) group to provide project support performing test setup, monitoring, inspection, and reporting using procedures and criteria set forth in the test plan. This is a 3rd shift position. (10p-6:30a).

MAJOR DUTIES:

Assembly of test rigs based on layout drawings and setup instructions. This includes:

Mechanical assembly using hand tools and battery/air impact wrenches

Use of overhead cranes

Connecting hydraulic plumbing

Connecting electrical control cables

Requires bending, kneeling, working at floor level

Must be able to lift 25 lbs

Document any changes to the setup procedure and layout drawings for continuous improvement.

Monitor and adjust test controls as necessary to keep the tests running efficiently.

Perform test specimen inspections and make repairs as required by the defined test parameters.

Document all test related incidents and activities using a web-based application.

Contact the appropriate personnel as required to prevent safety issues, environmental issues, and failures to test equipment or specimens and perform emergency shutoff procedures if necessary.

Perform routine lab maintenance and cleaning. Including, but not limited to, mopping, vacuuming, organizing, and putting away tools/equipment in the lab.

Pick up parts from the Parts Distribution Center and perform various other errands.

PREFERRED BACKGROUND

Experience working on machinery (tear down and repair), mechanic/mechanical background

Knowledge of Windows file/folder structure and how to copy/move/rename files

Good computer skills with Microsoft Office

Ability to read dimensioned part drawings and test layout drawings

Ability to work independently

Experience with servo-hydraulic or hydraulic systems preferred, but not necessary

About US Tech Solutions:

US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Are attention to detail and excellent soldering abilities among your key strengths? Do you enjoy reading schematics and implementing ECOs? Can you see yourself playing an important role on a team dedicated to producing world-class quality electronic products? Annapolis Micro Systems is searching for dedicated and passionate Assemblers to join our production team and take pride in sending products to test with zero defects.

Founded in 1982 and located in beautiful Annapolis, Maryland, we have a long history of designing and building the highest-performing embedded computing products. We offer the variety, challenge, and stability you are looking for. We perform both government and commercial work, and members of our small, tight-knit team get to wear multiple hats.

Our production team is a close-knit group of professionals who are upbeat, talented, and extremely proud of their work and the cutting-edge products they produce. We use automated Surface Mount Technology (SMT) equipment to assemble our own high-quality printed circuit cards.

Join us today and become part of the future of computing technology!

This position will be on the 2nd shift, 2:00 p.m. to 11:00 p.m., Monday through Friday. The initial training period will take place during the 1st shift, 6:00 a.m. to 3:00 p.m.

Essential Duties and Responsibilities

• Solder THT and SMT components per IPC A 610 Class III Standards
• Rework and touch up per IPC A 610 Class III Standards
• Assemble PCBs into complex modules
• Build cable and chassis assemblies
• Press-fit connectors using a benchtop manual press
• Implement ECOs
• Inspect incoming material: PCBs, panels, heatsinks, etc.
• Complete final assembly of products
• Build prototypes for Engineering using schematics
• Keep Manufacturing consumables stocked, communicate stock levels and requirements to Purchasing team

Requirements

• Minimum High School or equivalent
• Certified to J-STD-001 preferred
• Excellent Soldering Skills
• Manual Dexterity
• Able to lift 20 lbs
• U.S. Citizenship

Job Summary: ICON Builders is seeking a detail-oriented, motivated, and experienced Superintendent in Texas for multifamily low-income renovation projects. This individual will be responsible for on-site coordination with Subcontractors, material and equipment, ensuring that specifications are being strictly followed and work is proceeding on schedule and to the highest standard of quality and care. The Superintendent plays a vital role in scheduling, sequencing, inspections, quality control and job site safety. This role is essential in maintaining ICON Builders’ commitment to delivering high-quality construction projects within budget and on schedule.

Salary: DOE

Qualities and Characteristics that are inherent in this Position:

Superintendents must pay attention to detail, be self-motivated, have ability to multi-task and have strong written and verbal communication skills. Company projects are inherently deadline driven and require a helpful and collaborative effort with project team members every day.

Must be experienced in and able to demonstrate a broad knowledge of construction including understanding Subcontractor work, materials, estimating, cost control, scheduling and safety. Must possess knowledge of Occupied Affordable Housing renovation or have the ability to quickly learn and understand processes for success with ICON Builders.

This position requires a hands-on, self-driven, disciplined, and detail-oriented individual with the ability to work independently in a high-volume environment that requires a work product that is highly accurate and timely. High degree of integrity including ability to successfully deal with sensitive or confidential information.

Responsibilities:

• Schedule Subcontractors, consultants, and vendors in critical path to ensure timely completion.
• Walk the project on a regular basis to enforce Company standards for construction to ensure a quality product upon completion.
• Identify and communicate all work that does not conform to project specifications or standard of quality.
• Exhibit skills that establish and maintain harmonious working relationships between all members of the team and all activity on job site.
• Prepare and conduct all onsite Subcontractor meetings. Always monitor and enforce project safety exceeding local authority and OSHA standards.
• Review project plans, specifications, contracts, submittals as required, and plan work accordingly.
• Work with local building officials to schedule inspections as required to obtain sign-off approvals.
• Ensure that the job site is clean, safe, and organized. Maintain the job-site office in a neat and organized manner with appropriate documentation and due diligence in place.
• Prepare and maintain project As-built drawings for submittal upon completion of the project.
• Work with local utility companies to ensure timely installation of phone, power, gas, and cable.
• Prepare the project site and arrange for installation of temporary facilities as required for construction.
• Assist in obtaining permits or approval of revisions.
• Complete and submit all necessary paperwork on time.
• Take ownership and responsibility for the creation and completion of the project punch list.
• Perform Superintendent’s duties at multiple job sites, simultaneously.

About ICON Builders: ICON Builders specializes in the renovation of multi-family and senior apartment projects. With over 30 years of Low-Income Housing Tax Credit Experience and more than 25,000 residential units delivered across the United States, ICON Builders is dedicated to excellence, quality, and innovation. We are an equal opportunity employer committed to fostering a diverse and inclusive workplace.

Duotech Services: Process Engineer – Depot Electronics Repair

Location: United States (On-Site); potential for Huntsville, AL, and Franklin, NC

Job Type: Full-Time

Industry: Defense / Aerospace Electronics Manufacturing & Depot Repair

Clearance: Ability to obtain and maintain a U.S. Government security clearance (as required)

Citizenship Requirement: U.S. Person (ITAR)

ABOUT THE ROLE

We are seeking a Process Engineer to support depot-level repair, overhaul, and sustainment of high-reliability defense electronic systems. This role focuses on developing, sustaining, and improving repair processes for complex electronic assemblies operating in mission-critical environments. The ideal candidate brings hands-on electronics repair experience, strong process discipline, and the ability to drive yield, quality, and throughput in a regulated defense environment.

KEY RESPONSIBILITIES

• Develop, document, and maintain depot repair processes for complex electronic assemblies, including PCBA, electro-mechanical, cable/harness, and box-level units

• Author and sustain repair work instructions, travelers, routings, and process flows

• Provide day-to-day process engineering support to depot repair operations

• Lead root cause and corrective action (RCCA) activities

• Support repair transfer and sustainment activities

• Define tooling, fixtures, and test equipment requirements

• Track process performance metrics and drive continuous improvement

• Ensure compliance with AS9100, IPC, ITAR, ESD, and security requirements

• Support audits and government oversight

• Train and mentor repair technicians

REQUIRED QUALIFICATIONS

• Bachelor’s degree in Manufacturing, Electrical, or Industrial Engineering (or related)

• 3+ years supporting electronics manufacturing or depot-level repair

• Working knowledge of IPC standards (IPC-A-610, IPC-7711/7721, J-STD-001)

• Experience in AS9100 or ISO-certified environments

• Strong technical documentation and troubleshooting skills

• U.S. Person status (ITAR)

PREFERRED QUALIFICATIONS

• Defense or aerospace depot repair experience

• Failure analysis and conformal coating repair experience

• Experience with legacy systems and obsolescence challenges

• Lean or Six Sigma experience

• Experience supporting DoD customers

WORK ENVIRONMENT

On-site depot repair and manufacturing environment supporting classified and export-controlled programs. Adherence to ESD, safety, and security protocols is required.

EQUAL OPPORTUNITY EMPLOYER

We are an Equal Opportunity Employer and consider all qualified applicants without regard to protected status.

Join Us in Powering Critical Communications

At ERS Wireless, we design, install, and maintain Motorola Solutions’ most advanced communication systems. Every day, our work ensures that police officers, firefighters, healthcare staff, teachers, and skilled tradespeople have the tools they need to stay safe and connected. Whether in routine operations or life-or-death emergencies, our mission is clear: deliver reliable communication when it matters most.

We’re seeking an experienced Field Service Technician who thrives on solving complex technical challenges, enjoys collaborating with cross-functional teams, and takes pride in serving customers who depend on secure, mission-critical communications.

What You’ll Do

• Install, optimize, and maintain highly technical, mission-critical communication systems at customer sites.
• Monitor and troubleshoot system performance, ensuring maximum uptime and reliability.
• Perform advanced hardware/software installation, upgrades, and preventative maintenance.
• Diagnose and resolve technical issues quickly—even in high-pressure scenarios.
• Work with Project Managers, Engineers, Sales, and Public Safety partners to design and deploy cutting-edge Motorola Solutions systems.
• Use specialized test equipment (Communications Systems Analyzers, watt meters, Antenna Systems Analyzers, ethernet testers, etc.) to validate and optimize system performance.
• Document work with precision, ensuring clear records for system history and future optimization.
• Provide technical training and mentorship to internal teams and customers.

What We’re Looking For

• Experience with VHF, UHF, 700/800 MHz public safety radio systems.
• Familiarity with 911/NG911, NICE logging systems, Airbus, or similar infrastructure.
• Hands-on experience with P25 Systems, RF systems, wired/wireless networks, or IT systems integration.
• Strong networking knowledge: LAN/WAN, routers, switches, bridges, cabling, and IP configuration.
• Comfort working independently with high accountability in the field.
• Excellent communication and collaboration skills with both technical teams and customer stakeholders.

Required Qualifications

• Associate’s Degree in Electronics, IT, Engineering Technology—or equivalent technical/military certification.
• CET Certification (or ability to obtain within 6 months).
• Valid FCC License and relevant industry certifications (preferred).
• Clean driving record and ability to travel within assigned territory.
• U.S. citizenship with ability to pass/maintain background checks and security clearances.

We offer:

• Competitive pay, based on experience
• Medical, Dental, and Vision Insurance
• Paid Holidays & Paid Time Off
• 401(k) with company match
• Short- and Long-Term Disability Insurance
• Ongoing technical training and career development opportunities

ERS Wireless is proud to be an Equal Opportunity Employer and is dedicated to cultivating a diverse and inclusive workplace. We will consider all applications for employment and do not discriminate on any basis protected by federal, state, or local law. All employment is decided based on qualifications, merit and business need.