Bright Minds Jobs in Usa

• 
  
• Be responsible for quality product standards with no defects.
  
• Meet customer deadlines and expectations.
  
• Be responsible to comply with applicable elements of quality systems.
  
• Participate in cost reduction plans and continuous improvement plans/events, as required.
  
• Participate in audits.
  
• Acquire applicable skill/knowledge/certifications as required.
  
• Perform inspection of parts, does coating, labeling/boxing, and general preparation for shipment.
  
• Check parts for cracks, loose connections, faulty bonds, and faulty assembly.
  
• Record test results in testing log. Route products for rework or salvage of usable parts.
  
• Route reworked assemblies for testing. Clean completed assemblies. Assemble parts according to blueprint specifications.
  
• Test parts by connecting to test equipment setting controls, observing readings and actions of instrument checking for malfunctions.
  
• Set up and use equipment such as: Ragen Assembly, Component Lead Former, Drill Press, Denison Hydraulic Press, Component Lead tinning, and S.M.T. Re-flow.
  
• May fabricate instrument parts through crimping, staking, and cutting.
  
• Acquire applicable skill/knowledge/certifications as required.
  
• Once properly trained and/or certified- perform specific tasks including, but not limited to, welding, soldering, item test and inspection, filler, immersion testing.
  
• Maintain materials, equipment, and work area in a clean and orderly condition.
  
• Comply with all rules and regulations of Raytheon Technologies, including, but not limited to: Environmental Health and Safety,
  
• Complete assigned tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individual skills.
  
• Check work methods and results for conformance to standards and re-instruct as required.
  
• Report to lead or supervisor on work progress and updates including conditions surrounding failures to meet quality standards.
  
• Other duties as assigned.
  

• 
  
• Typically requires a HS Diploma or GED.
  
• U.S. Person (U.S. citizen, permanent resident, or granted refugee or asylee status) as defined here: We Prefer:
  
  • 
    
  • Manufacturing experience is strongly preferred
    
  • Career Readiness Certification (CRC) strongly preferred.
    
  • The ability to interpret schematics and/or technical drawings.
    
  • The ability to successfully complete training modules associated with job grade.
    
  • The ability to follow assembly instruction.
    
  • The ability to effectively work in an environment requiring repetitive job responsibilities.
    
  • The ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
    
  • The ability to understand end uses of products being built.
    
  • Strong written and verbal communication skills.
    
  • Attention to detail to ensure safety and quality.
    
  • Strong organizational skills and ability to multi-task.
    
  • The ability to work in a team to support work capacity in a fast-paced environment.
    
  • Intermediate computer skills in terms of typing, navigating screens and learning new software programs.
    
  • Demonstrated analytical skills and problem-solving abilities.
    
  • The ability to take direction from more experienced coworkers, leads and supervisors.
    
  
  What We Offer:
  1st shift schedule: Monday - Friday; 6:30am - 3:00pm
  Some of our competitive benefits package includes:
  
  • 
    
  • Medical, dental, and vision insurance
    
  • Three weeks of vacation for newly hired employees
    
  • Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option
    
  • Employee Scholar Program, tuition reimbursement program
    
  • Life insurance and disability coverage
    
  • Optional coverages you can buy: Pet Insurance, Home and Auto, additional life insurance, accident insurance, critical illness insurance, group legal
    
  • Ovia Health, fertility and family planning
    
  • Employee Assistance Plan, including up to 5 free counseling sessions
    
  • Incentives for a Healthy You
    
  • Bright Horizons, back-up child / elder care and college coach resources
    
  • Autism Benefit
    
  • Doctor on Demand, virtual doctor visits
    
  • Adoption Assistance
    
  • Teladoc Medical Experts, second opinion program
    
  • And more!
    
  
  Learn More and Apply Now!
  Collins Aerospace, a RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market.
  Avionics delivers advanced cockpit displays, vision systems, and comprehensive digital solutions for global government, commercial and business aviation customers. We provide connectivity and managed data services to ensure safety and seamless communication for passengers, crews, and militaries, from aircraft and airports to air traffic management. Join us in creating solutions that connect the world, one flight at a time. Start your application today.
  *Please ensure the role type (defined below) is appropriate for your needs before applying to this role.
  Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
  Regardless of your role type, collaboration and innovation are critical to our business and all employees will have access to digital tools so they can work with colleagues around the world - and access to Collins sites when their work requires in-person meetings.
  At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again.
  Apply now and be part of the team that's redefining aerospace, every day.
  The starting rate of pay for this role is $20.00/hour; however RTX considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate's work experience, location, education/training, and key skills.
  As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
  Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
  Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.
  This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.
  RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
  RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.
  Privacy Policy and Terms:
  Click on this link to read the Policy and Terms

Eaton's IS AER FMC division is currently seeking a Senior CNC Setup Machinist. The hourly rate for this position is $25 - $29 per hour. The hours for this shift are 7:00 am - 3:00 pm. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations.

Eaton Aerospace Group is currently seeking CNC Setup Machinists to join our 1st shift team. This position is based in our North Charleston, SC facility. Relocation assistance will be provided. The range for this role is $25-29 per hour. This position is currently offering a sign-on bonus of $3,000*; less applicable withholding.

Position Overview: The setup machinist will lead the transition/changeover between production runs on various CNC machines such as mills and lathes then operate select machines through the remainder of the production run while ensuring quality parts from the work cell.

Making what matters work at Eaton takes the passion of every employee around the world. We create an environment where creativity, invention and discovery become reality, each and every day. It's where bold, bright professionals like you can reach your full potentialand where you can help us reach ours.

In this function you will: Properly set tools in machine locations required for set-up & perform part changeover including program retrieval and input Establish work offsets (G54, G55, etc.) manually and utilizing probing technology Read, understand, and reset CNC machine program codes Be able to calculate and input axis coordinates for CNC machines up to 3 axis's or use spindle probe to determine work offsets Utilize Geometric Dimensioning and Tolerancing results to make adjustments to work offsets Additional benefits to include: Health insurance effective from first day of employment, air conditioned and well-maintained facility, paid lunch, two weeks of vacation upon hire. Eaton is invested in the learning and development of its employees, offering tuition assistance and capitalizing on new machining and measuring equipment.

Required (Basic) Qualifications: Must have a minimum of five (5) years' experience operating CNC lathes and/or mills in a manufacturing or operations environment or equivalent education Must have three (3) years' experience setting up CNC lathes and/or mills Candidates must be legally authorized to work in the United States without company sponsorship. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.

Preferred Qualifications: Technical degree in manufacturing, machining, or related field Journeyman's Toolmaker Certification Experience with CNC or conversational programming Experience operating a variety of manual machines (lathes, mills, jig bore, grinders etc.) Familiar with Kaizen, Lean Manufacturing techniques such as Value Stream Mapping, 5S, TPM, Error Proofing, Standardized Work, Set up Reduction, Continuous Flow, and Pull Experience in Troubleshooting Problems using quality tools such as statistics, 8D, 5 Why, Fishbone diagrams, etc. PC computer skills (Excel, Access, Word, Outlook, etc...) with ability to learn other programs Must be able to understand and interpret blueprints and sketches including proficiency in Geometric Dimensioning and Tolerancing (GD&T). Must be able to perform basic shop math. Must have demonstrated mechanical aptitude.

• 
  
• Generating Authorized Release Certificates (ARC) for multiple regulatory civil aviation authorities or Certificates of Conformance for military customers
  
• Issuing scrap certificates
  
• Conducting final inspections on electronic components, subassemblies, and processes
  
• Ensuring no defects in assembly, soldering, bonding, or finish
  
• Examining for specified characteristics (smoothness and centering of holes) or defects (scratches and chips)
  
• Performing unit shakedown to check for foreign objects and loose internal hardware.
  
• Marking defects and removing rejects, setting them aside for repair
  
• Reading and interpreting technical data such as service bulletins, component maintenance manuals, or engineering prints.
  
• Ensuring appropriate record keeping.
  
• Reviewing work order documentation for accuracy and completeness, ensuring adherence to specifications and conformance to company standards and customers' requirements.
  
• Effectively interacting with team members and support staff as well as external customers when applicable (source inspection, external approvals, etc.)
  
• 1st Shift: Monday to Friday, 8am to 4:30pm
  

• 
  
• You may occasionally need to provide weekend and holiday support to meet customer needs.
  
• In your role, you will be exposed to:
  
  • 
    
  • Products of various weights and sizes
    
  • Equipment with moving parts
    
  • Chemicals that may emit fumes
    
  
  
  
• To minimize safety risk to you and product, you must wear static-control and personal protective equipment.
  

• 
  
• Due to the nature of our work, you will need to be able to perform the following functions, with or without reasonable accommodation
  
• Distinguishing colors and meeting vision requirements
  
• Bending, stooping, reaching, turning as needed to place units in test stands, pick up totes, place units on rack, etc.
  
• Using hands for extended periods of time to perform testing and troubleshooting tasks (e.g. grasping, holding, picking, placing, twisting, fine manipulation)
  
• Must be able to work in a standing position up to 8 hours per day
  
• Must be able to lift up to 40 lbs
  
• Transporting product with or without product carts
  

• 
  
• HS diploma with a minimum of 2 years of relevant experience. In the absence of a HS diploma or GED, 4 years of relevant experience is required
  
• Familiarity with principles of Quality & Aerospace
  

• 
  
• Experience with FAA 8130 creation
  
• Experience working with SAP or any other ERP system
  
• Experience working with blueprints and/or technical drawings
  
• Solder experience
  
• Prior experience with component level troubleshooting
  
• A&P License
  

• 
  
• Medical, dental, and vision insurance
  
• Three weeks of vacation for newly hired employees
  
• Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option
  
• Tuition reimbursement program
  
• Student Loan Repayment Program
  
• Life insurance and disability coverage
  
• Optional coverages you can buy: pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection
  
• Birth, adoption, parental leave benefits
  
• Ovia Health, fertility, and family planning
  
• Adoption Assistance
  
• Autism Benefit
  
• Employee Assistance Plan, including up to 10 free counseling sessions
  
• Healthy You Incentives, wellness rewards program
  
• Doctor on Demand, virtual doctor visits
  
• Bright Horizons, child and elder care services
  
• Teladoc Medical Experts, second opinion program
  
• And more!
  

This is a unique opportunity to take control of and propel you along your career path. Baker Roofing invests in our employees by empowering success through a structured growth plan and intensive training courses. We value our employees by providing competitive benefits, prioritizing safety, and emphasizing work-life balance.

With more than 20 locations across the Southeast, Baker Roofing Company is an industry leader in providing an outstanding experience in commercial roofing, residential construction, metal fabrication, restoration, and more. We pride ourselves on over 100 years of quality work, investing in our employees, and providing a family-centered culture.

Pay: $30-35/hour

Benefits:

• 7 Paid Holidays
• Medical insurance
• Dental Insurance
• Vision Insurance
• 401K
• Paid Holidays

Cover roofs with TPO, EPDM, PVC, and related materials. May spray roofs, sidings, and walls with material to bind, seal, insulate, or soundproof sections of structures.

• Education: High School/ G.E.D
• Years of Experience: 1-3 years of roofing experience
• Driver's License

• Knowledge of safety techniques and procedures to set up a safety plan including toolbox talks, safety huddles
• Calculate and control labor projections, material storage, and material needs
• Ability to read shop drawings, reproduce manufacturing details, and layout roofs and walls
• Knowledge of how to cut, shape, fit, join, and install edge metal, insulation, ice & water shields, wood, or other construction materials
• Run material inventory
• Knowledge of how to install pipe boots, ridge/hip caps, rake, nail base, valley, eave lock, and ice & water shield
• Knowledge of how to install counter flashing, coping, fascia, gutters, miters, downspouts, roof curbs, flat lock, and thru-wall flashing
• Knowledge of how to install crickets, chimney flashing, curbs, and how to make seaming and horizontal and vertical soldering
• Ability to fulfill: timesheets, shop requisitions, and job reports
• Interpersonal and leadership skills with ability to work on a team and take corrective action when necessary
• Ability to train and supervise the crew and subcontractors as needed in order to meet the quality and production goals
• Meet with GC and customers

• Thoroughly review job file and shop drawing with manager and including the scope of work, materials ordered and delivery schedule, budget for labor productions (man-days), and job site contacts
• Ensure that proper safety and equipment are on the job and used in the proper manner
• Supervise and support crew every day about safety, quality, and labor production
• Monitor and maintain job site cleanliness and daily housekeeping
• Make sure on-site equipment is monitored and maintained, such as oil changes on kettle motors, belts on cutters, etc.
• Prepare and submit daily job reports, field progress problems, technical questions, and timesheets, as directed by manager
• Responsible for overall quality control of each job including: checking for water tightness, mops left on the roof, ensuring the job site is complete and has been cleaned up properly, coordinate punch list and job close out before crew leaves job site for the last time
• Install, repair, or replace single-ply roofing systems, using waterproof sheet materials such as modified plastics, elastomeric, or other asphaltic compositions
• Cut felt, shingles, and strips of flashing, and fit them into angles formed by walls, vents, and intersecting roof surfaces
• Install vapor barriers and/or layers of insulation on the roof decks of flat roofs and seal the seams
• Install partially overlapping layers of material over roof insulation surfaces, determining distance of roofing material overlap using chalk lines, gauges on shingling hatchets, or lines on shingles
• Cover roofs and exterior walls of structures with slate, single-ply systems, asphalt, aluminum, wood, gravel, gypsum, and/or related materials, using brushes, knives, punches, hammers, and other tools.
• Operate vehicles, mechanized devices, or equipment
• Train and coach other employees

• Requires standing up for long periods of time
• Requires use of ladders, scaffolds, and stairways
• Requires ability to climb, lift, balance, walk, and handle materials
• Requires use of abdominal and lower back muscles to support part of the body repeatedly or continuously over time without giving out or fatiguing
• Requires seeing details at close range
• Requires repetitive movement, bending or twisting, kneeling, crouching, stooping or crawling
• Requires ability to stand, walk, lift, and carry items weighing 50 pounds regularly

• Requires working in extremely bright or inadequate lighting conditions, in very hot (above 90 F degrees) or very cold (below 32 F degrees) temperatures, including exposure to sounds and noise levels that are distracting or uncomfortable
• Includes exposure to contaminants, hazardous material, or equipment
• Mistakes are not easily correctable and have serious consequences, therefore safety procedures need to be followed
• Requires exposure to minor burns, cuts, bites, or stings
• Requires exposure to high places or dangerous conditions

The statements herein are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.

Baker Roofing Company is an equal opportunity employer and gives consideration for employment to qualified applicants without regard to race, color, religion, sex, national origin, disability, or protected veteran status. If you need special assistance or accommodation in applying for employment at Baker Roofing Company, please contact our Recruiting department at 919-828-2975 or . EOE Minorities/Females/Disability/Veterans; VEVRAA Federal Contractor

• Principals only. Recruiters, please don't contact this job poster.

• 
  
• Build large and small components of life rafts using many different types of materials
  
• Document required steps and signatures for quality assurance
  
• Follow quality procedures and documentation accurately
  
• Bond materials together using adhesives
  
• Maintain high levels of quality
  
• Maintain high levels of safety for yourself and others and responsible for wearing/using defined PPE (personal protective equipment)
  
• Work and communicate effectively in a complex team environment
  
• 100% of time spent on production floor with variable amounts of noise
  
• Constant daily exposure to adhesive and solvent vapors.
  
• Ability to wear gloves (including latex) to protect hands while working with production chemicals.
  
• Minimal exposure to machinery with moving parts
  
• Ability to use and manipulate clamps, brushes (with gloves on), pushers, scissors, seam tape and talc
  

• Typically requires HS diploma (or equivalent, e.g. G.E.D. in the US) or vocational/technical education in related discipline

• 
  
• Manufacturing/assembly experience
  
• Ability to wear the necessary Personal Protective Equipment
  
• Must be able to individually lift and/or carry materials weighing up to 25 pounds
  

• 
  
• Medical, dental, and vision insurance.
  
• Three weeks of vacation for newly hired employees.
  
• Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option.
  
• Tuition reimbursement program.
  
• Student Loan Repayment Program.
  
• Life insurance and disability coverage.
  
• Optional coverages you can buy: pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection.
  
• Birth, adoption, parental leave benefits.
  
• Ovia Health, fertility, and family planning.
  
• Adoption Assistance.
  
• Autism Benefit.
  
• Employee Assistance Plan, including up to 10 free counseling sessions.
  
• Healthy You Incentives, wellness rewards program.
  
• Doctor on Demand, virtual doctor visits.
  
• Bright Horizons, child and elder care services.
  
• Teladoc Medical Experts, second opinion program.
  
• And more!
  

Job Category: Sales

Requisition Number: SALES034130

Compton, CA 90221, USA

Sign-On Bonus Opportunity of up to $4,000*

Pay Range:

$31 - $72 / hour

Our Perks & Benefits:

• Unlimited/uncapped commission your earning potential is in your hands
• Lucrative incentive sales plans, bonuses and sales contests to recognize your success
• No cold calling we provide a high volume of inbound leads and walk in traffic
• Comprehensive paid training and licensing, plus on-going mentorship and development
• Recognition-focused culture that celebrates your achievements
• Comprehensive benefits package including medical, dental, vision and life insurance
• Paid time off to recharge and maintain a healthy work-life balance
• Retirement Plan (401k) with company-matched contributions
• Fitness Reimbursement up to $15/month for gym memberships
• Employee Assistance Program confidential support for personal or professional challenges at no cost
• Extra Perks optional plans for disability, hospital indemnity, health advocate program, universal life, critical illness, accident insurance, and even pet insurance

Our Company:

Confie and its family of companies - Freeway, Baja, Bluefire & others - is one of the largest privately held insurance brokers in the United States. We have been ranked the #1 Personal Lines Leader by the Insurance Journal for eight consecutive years! With more than 800 retail locations nationwide, we are committed to helping our employees take their careers and income potential to new heights. We are proactively looking for bright, motivated, and goal-oriented individuals who are excited about career advancement. Come Grow With Us!

What You Will Do:

As an Insurance Agent, your primary responsibility is selling nonstandard auto insurance, though you will have opportunities to grow earnings with additional products such as homeowners insurance and, when applicable, health insurance.

• Drive Growth: Solicit new business while maintaining strong relationships with current customers to achieve or exceed sales goals.
• Build Relationships: Connect with customers, understand their needs, and expand business opportunities by offering auto, homeowners, or health insurance solutions.
• Ensure Accuracy: Maintain records of transactions, including deposits and documentation in the agency management system.
• Be a Trusted Advisor: Establish rapport with clients and provide guidance to help them choose the insurance product that fits their needs.

The Perfect Match:

• A Personal Lines or Property and Casualty license (preferred, but not required we'll support you in obtaining one)
• Bilingual skills in English and Spanish (a strong plus)
• Experience in sales or customer service and a passion for helping people
• A High School Diploma or GED
• Strong ability to build customer relationships and earn trust
• Excellent follow-up, organization, and multi-tasking skills
• An ambitious, motivated attitude with a desire for growth and advancement
• Strong written and verbal communication skills

• 
  
• Once properly trained and/or certified, perform specific tasks including but not limited to, soldering, hardware installation, post coating.
  
• Under close supervision, inspects own work performed to ensure a quality product which conforms to workmanship standards, engineering requirements and design specifications.
  
• Perform in accordance with productivity expectations to meet customer deadlines.
  
• Comply with all rules and regulations of Raytheon Technologies, including, but not limited to: Environmental Health and Safety, Ethics and Compliance, Quality, and attendance requirements.
  
• Participate in cost reduction plans and continuous improvement plans/events, as required.
  
• Participate in audits.
  
• Acquire applicable skill/knowledge/certifications and complete trainings as required.
  
• Maintain materials, equipment, and work area in a clean and orderly condition.
  
• Report to lead or supervisor on work progress and updates.
  
• Complete assigned tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individual skills.
  
• Must be able to pass a soldering assessment after training course provided.
  
• Other duties as assigned.
  

• 
  
• Typically requires HS Diploma (or equivalent, e.g. G.E.D. in the US) or vocational/technical education in related discipline.
  
• U.S. Person (U.S. citizen, permanent resident, refugee or asylee) or eligible to obtain necessary export authorizations required.
  

• 
  
• Career Readiness Certification (CRC) strongly preferred.
  
• The ability to interpret schematics and/or technical drawings
  
• The ability to successfully complete training modules associated with job grade.
  
• The ability to follow assembly instruction.
  
• The ability to effectively work in an environment requiring repetitive job responsibilities.
  
• The ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
  
• The ability to understand end uses of products being built.
  
• Strong written and verbal communication skills.
  
• Attention to detail in order to ensure safety and quality.
  
• Strong organizational skills and ability to multi-task.
  
• The ability to work in a team to support work capacity in a fast-paced environment.
  
• Intermediate computer skills in terms of typing, navigating screens and learning new software programs.
  
• Demonstrated analytical skills and problem-solving abilities.
  
• The ability to take direction from more experienced coworkers, leads and supervisors.
  
• May be standing for 8+ hours.
  
• Overtime eligible
  

• 
  
• Medical, dental, and vision insurance
  
• Three weeks of vacation for newly hired employees
  
• Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option
  
• Tuition reimbursement program
  
• Student Loan Repayment Program
  
• Life insurance and disability coverage
  
• Optional coverages you can buy: pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection
  
• Birth, adoption, parental leave benefits
  
• Ovia Health, fertility, and family planning
  
• Adoption Assistance
  
• Autism Benefit
  
• Employee Assistance Plan, including up to 10 free counseling sessions
  
• Healthy You Incentives, wellness rewards program
  
• Doctor on Demand, virtual doctor visits
  
• Bright Horizons, child and elder care services
  
• Teladoc Medical Experts, second opinion program
  
• And more!
  

Valid CDL-A and 3 months of experience required for this position.

• Starting earning potential of $70,000 - $100,000+ annually
  • Start at 58 CPM or 25.25% of the line haul, earn more with experience!
  • Driver chooses mileage or percentage pay!
• Average 2,500 - 3,000 miles per week
• Dedicated weekend home time*
• Sign-on bonus**
• Health, dental, vision and life insurance
• 401k retirement plan with matching

*Depending on location

**Amount based on experience

• Over 60% of loads pre-loaded & pre-tarped
• Guaranteed weekly minimum
• Several forms of accessorial pay
• Orientation and training pay
• Vacation and holiday pay
• Safety bonus
• Driver reward program
• Phone reimbursement
• Paid weekly
• Free rider program
• GI Bill approved

Were a family business, and our Keim TS drivers are part of that family. With top-tier drivers, we haul over 50,000 flatbed and dry van loads annually across the lower 48 states, making us one of the best trucking companies to work for.

We focus on keeping our drivers safe and comfortable first and foremost. Our fleet includes new Peterbilt 589s and Kenworth T880s, and W990s with reliable Cummins engines. With a trailer-to-truck ratio over 2-to-1, drivers spend more time delivering and less time waiting. Our expert mechanics ensure the trucks stay in top condition, keeping everything running smoothly.

• Newer equipment (typically nothing older than 3 years)
• No slip seating
• 1800W inverters
• Start at 68 MPH cruise - could be 75 MPH!

• Valid CDL-A
• 3 months of experience required
• Must be at least 21 years of age
• No SAP vioulations
• Solid work history
• Must be able to pass a drug screen
• No more than 3 safety incidents in the last 3 years
• No DUI/DW, reckless or careless driving, or alcohol or drug conviction in the last 5 years
• Must be able to lift and carry 80 lb. tarps, and able to climb and tarp trailers

Min Compensation: USD $58,500.00/Yr.

Max Compensation: USD $71,250.00/Yr.

Why We Need Your Talents:

Are you motivated, charismatic, and outgoing? This is your chance to be on the cutting edge of entertainment and hospitality at a property with a unique and thrilling company culture. Here at Anne Arundel County's only AAA four diamond rated hotel and casino, your communication skills will be most helpful in prospecting clients for our brand-new venue space as well as 310 guestrooms, including 52 suites.

Your business development, hotel operations, and food and beverage experience will aide in negotiating large scale event contracts. Your friendly disposition will be beneficial in travels to trade shows and other promotional opportunities. Your driven attitude will yield up to 70% bonus pay quarterly!

Where You'll Make an Impact:

• Develop and maintain an account base to achieve revenue goals through proactive sales.
• Prompt response to all inquiries and correspondence from clients, prospects, and lead referrals.
• Follow up on sales leads assigned by leadership.
• Responsible for implementing a sales action plan for the development of designated market segments (with or without food and beverage) which include:
  • Prospecting outside sales calls.
  • Performing site tours.
  • Execute trade shows and sales trips as designated.
• Provide weekly and monthly reports of sales calls and marketing actions as requested by Sales Leadership.
• Step in for Sales Leadership as required in their absence.

• Excellent time management and self-motivation.
• Relationship building and networking skills.
• Excellent communication, presentation, guest relations, and organizational skills.
• Exemplary customer service skills.
• A drive for results as well as a history of delivering.

Must-Haves:

• • Education: Four year college degree or equivalent education/experience.
  • Experience: Minimum of two years of hotel group sales experience.
  • Skill Requirements:
    • Exceptional client prospecting, negotiation, and closing skills.
    • Experience/account knowledge of the Mid-Atlantic Region preferred.
    • Direct experience with all or some of the following hotel segments is required: Group: Corporate, Association, SMERF, Catering Events
    • Knowledge of Delphi FDC preferred.
    • Professional written correspondence skills.

Physical Requirements:

• Lifting, pushing, and carrying up to 20lbs.
• Infrequent bending/kneeling.
• Frequent walking, standing, and sitting.
• Climbing steps.
• No. of employees supervised: No formal supervisory responsibility.
• Travel required: Frequent for outside sales calls.

Perks We Offer You

• Comprehensive group health benefits for full-time and part-time Team Members and their eligible dependents. Other benefits for full-time and part-time Team Members include:
  • Free Basic Life Insurance
  • Free Short Term & Long-Term Disability
  • Generous retirement savings options
  • Paid Time Off
  • Tuition Reimbursement
• On-site Wellness center for Team Members and eligible dependents (Maryland Property only)
• Training and pathways for career growth
• Robust Rewards & Recognition Programs
• Annual Merit Based Pay Increases
• Discretionary Performance Bonuses
• Discretionary Service Bonuses
• Free parking
• Free food and discounted meals
• Live! Hotel, Food & Beverage, and Entertainment Discounts

Life at Live!

Individuals chosen to be part of the Live! Team can expect:

• To be part of an exciting experience unlike any other in the market.
• To be given the power and responsibility to put service and community first.
• To come together as a strong team, while valuing and celebrating our diversity.
• To be given the tools, resources, and opportunity to grow in their career.
• To work hard and have fun.
• Live is a 24 hour/7 days per week high energy casino with a culture committed to fairness, teamwork, and most importantly FUN.
• The casino is large and fast paced, requiring the ability and energy to move about it with a true sense of urgency!
• Exposed to alcohol, cigarette and cigar smoke, bright lights, and loud noises.
• You will work in an environment where smoking is allowed.

Driven by the desire to provide an iconic customer experience, at CarMax, we ensure customers can buy the vehicles they want in a way that suits them. That demands a special kind of sales consultant: one who takes time to build relationships with customers in order to understand their true needs. Join us, and you will help each customer purchase the right car, not the most expensive one. We've become the nation's largest retailer of used cars due to our honesty and transparency, and those same traits will help you succeed too.

What you will do Essential responsibilities

• Use your knowledge of CarMax inventory to assist customers in finding a vehicle that meets their needs
• Guide customers every step of the way, from sale or appraisal to test drives and arranging financing applications
• Complete all relevant records and documentation to ensure smooth transactions for our customers

Learn and succeed as part of a team

This is a high energy sales environment where you will work as a team to meet goals and we'll give you everything you need to be successful. Auto sales experience is not necessary we provide paid training and a personal sales mentor who is dedicated to your ongoing development. Bring us your ability to connect with people and build relationships, and we'll help you succeed. The prospects are bright for sales professionals who aspire to become mentors, managers and business leaders, and who are ready to work and learn as part of a team.

Qualifications and requirements

• Sales and customer service experience, in an area such as retail, is preferred
• Good listening skills and a strong customer focus
• High level of self-motivation

About CarMax

CarMax disrupted the auto industry by delivering the honest, transparent and high-integrity experience customers want and deserve. This innovative thinking around the way cars are bought and sold has helped us become the nation's largest retailer of used cars, with over 200 locations nationwide.

Our amazing team of more than 25,000 associates work together to deliver iconic customer experiences. Along the way, we help every associate grow their career and achieve their best, at work and in their community. We are recognized for our commitment to training and diversity and are one of the FORTUNE 100 Best Companies to Work For.

CarMax is an equal opportunity employer, and all qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, protected veteran status, disability status, or any other characteristic protected by law.

The hourly rate for this position is:

$17.16 - $20.00

Commissions: This position is eligible for commission.

Benefits: Except as otherwise required by state law, CarMax Associates are entitled to the following paid sick, vacation, and holiday time.

Associates that are considered full-time hourly or commissioned are eligible:

• To earn up to 48 hours of sick time per year accrued on a per pay period basis and between 80 hours and 200 hours per year of vacation time after a 90 day waiting period depending on years of continuous service with the Company.
• For 8 hours of pay for each of a total of 6 paid scheduled holidays per year plus 1 floating holiday. If such an Associate does work on a scheduled holiday due to business need, they are eligible for Holiday Premium Pay.

Associates considered full-time salaried are entitled to paid time away with no specified limit as needed for sick, vacation, bereavement, jury duty, holidays, floating holiday, etc. subject to manager approval.