Boeing Remote Jobs in Usa

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing's Global Real Estate and Facilities (GREF) organization is seeking a Maintenance Plumber to join our team in Seattle, Auburn, Kent, Puyallup, Renton and Tukwila, Washington. You will be supporting building & ground maintenance and initial installations. Our team supports a 24/7 operation, based on business needs.

This role allows you to obtain a variety of skillsets, the opportunity to learn from knowledgeable colleagues, and to work on critical maintenance plumbing solutions for major Boeing sites. You will receive both on-the-job & formal training to enhance your technical skills, and backflow licensing is provided by the company. Incentives include additional pay for obtaining trade licenses paid by the company as well as receiving shift differential pay for second and third shift. This position is also eligible for overtime hours and pay.

Position Responsibilities:

• Perform routine diagnosing, testing, and repairing of all types of plumbing lines and fixtures

• Repair, construct, install, rebuild, adjust, and modify plumbing lines and fixtures

• Layout, construct, maintain, diagnose, repair, adjust, modify, rebuild and test plant facilities plumbing, such as air, gas, and water, and drain line, sprinkler systems; gasoline pumps and related systems; high and low pressure steam equipment; liquid, air and vacuum pumps and accessories; pneumatic controls; various regulating and other valves; oxygen, hydrogen and hydraulic systems; boiler and furnace burners, baffles, pilot lights, governors, floats, strainers and oil pumps

• Perform work described in other maintenance classifications when incidental but necessary to the accomplishment of the assignment

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• 1+ years of experience in the plumbing or pipefitting trade

• Ability to perform work at heights up to 125 feet about ground level with appropriate safety gear and pass fall protection training

• Willingness to work any shift as required

Preferred Qualifications:

• 1+ years of experience working with any of the following: backflow prevention, chemical process tank lines, or high-pressure steam systems

• 1+ years of experience working in an industrial/manufacturing environment

• Possess related plumbing certification (e.g., backflow, fitter)                                                 

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for all shifts

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations. 

Summary pay range: $33.32 per hour – $61.01 per hour

Applications for this position will be accepted until Mar. 27, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airlines is excited to offer opportunities for a Numerical Control Tape Laminator Operator to join our Fabrication team in Everett, Washington.

Join our innovative team as a Numerical Control Tape Laminator Operator, where you will independently operate and adjust advanced tape laminator machines, ensuring precise setups and adherence to established shop practices. Your attention to detail will guide you as you prepare materials, verify specifications, and utilize precision measuring instruments to achieve optimal results. You will play a key role in monitoring machine operations, troubleshooting any issues, and performing quality checks to ensure that every part meets stringent standards. Your commitment to safety and proper handling of hazardous materials will contribute to a secure and efficient work environment. If you are passionate about precision manufacturing and thrive in a fast-paced setting, we invite you to be a part of our mission to deliver exceptional aerospace solutions.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Independently operate and adjust numerically controlled Tape Laminator machines according to established shop practices and procedures.

• Prepare for job setup by reviewing production orders, work orders (W/O), and setup documents, ensuring access to blueprints and drawings.

• Verify that the correct materials and tools are issued and free from visible defects before starting work.

• Identify the type of machine setup needed based on drawings and work orders, including flat tape laminating machines and automated fiber placement machines.

• Check machine setups and parts completed by previous operators to ensure safe working conditions and job progress.

• Prepare machines by obtaining materials from storage and performing necessary processes before operation, such as rolling tackifier and laying fiberglass.

• Use precision measuring instruments, such as dial indicators, to align and level the layup table as required.

• Retrieve and download CNC programs to the machine controller from the mainframe server.

• Set machine coordinates and adjust offsets, tool heights, and laser settings using the controller keyboard or pendant.

• Run the machine to lay graphite plies, copper ampe plies, and perform hand trimming and rework as necessary.

• Monitor machine operations for unusual vibrations or sounds, checking gauges and displays for warnings.

• Move finished parts and tools using appropriate material handling equipment as required.

• Handle and dispose of hazardous materials in accordance with safety regulations and using personal protective equipment.

• Perform quality checks after each operation to ensure parts meet specifications and are free from defects.

• Maintain personal and tool certifications, consulting with team leaders and supervisors on process or job-related issues as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ Years of experience using precision measuring tools.

• 1+ Years of experience with multi-axis Numerical Control (NC) machines.

• 1+ Years of experience obtaining and using information from drawings, documents, machine control data, to set up parts or material on pallets for machining operations.

• 1+ Years of experience working with blueprints, specifications, assembly drawings and standard operating procedures.

• Able to stand and walk throughout work shift (6+ hours) as well as carry and lift up to 25 pounds.

Preferred Qualifications:

• 1+ Years of experience operating 3, 4, or 5 axis NC/CNC machine tools.

• Experience working with and around hazardous materials (while using the proper protective equipment).

Conflict of Interest:

Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 22, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Tool & Die Maker to join our Materials Management & Tooling team in Auburn and Renton, Washington.

In this hands-on position, you will be responsible for a variety of tasks, from interpreting blueprints and work orders to developing effective plans for tool fabrication and repair. Your skills will be essential in troubleshooting production challenges, operating advanced machinery, and ensuring that all tools meet stringent quality standards. Collaborating with cross-functional teams, you will also engage with customers and suppliers to address any functional issues, all while adhering to safety protocols and continuous improvement practices. If you are passionate about precision engineering and ready to make a significant impact in a fast-paced environment, we invite you to explore this exciting opportunity.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform all functions related to tool fabrication, rework, and repair as required.

• Obtain work orders from the team leader or supervisor, determining assignments based on schedule dates and tool availability.

• Read work orders and blueprints to identify required tasks, tools, and equipment.

• Develop plans for the fabrication, maintenance, and repair of tools.

• Initiate and coordinate engineering change requests with internal support groups when necessary.

• Determine the sequence of tool fabrication work, troubleshoot issues, and develop solutions to production challenges.

• Access and utilize appropriate tool drawings, models, and specifications using available computing systems.

• Select and verify necessary equipment from the shop storage area, ensuring current tool certification.

• Perform repairs or replacements on tools as per Standing Tool Order (STO) Production Requests, and request rework orders if necessary.

• Layout holes, lines, and other tool features, and install or modify hydraulic, pneumatic, and vacuum tubes as required.

• Operate various machinery, including power saws, drill presses, and CNC machines, to shape materials and prepare details.

• Move materials and equipment using Powered Industrial Trucks (PIT) and overhead cranes as needed.

• Maintain accurate records of orders and coordinate tooling information with other shifts and departments.

• Handle hazardous materials in compliance with Boeing procedures, using appropriate personal protective equipment.

• Engage in continuous improvement practices to enhance quality, safety, and efficiency in tool and die work.

• Use precision measuring instruments, such as micrometers and gauges, to ensure accuracy in fabrication and repairs.

• Interface with customers and suppliers to incorporate changes or resolve functional and installation issues.

• Submit completed jobs to Quality Assurance and assist inspectors in performing necessary checks or measurements.

• Utilize mathematics, including algebra and trigonometry, to calculate dimensions and analyze Model Based Definition (MBD) for fabrication details.

• Conduct tool tryouts and make necessary adjustments to ensure production meets quality requirements and specifications.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications:

• 5+ years of experience in repairing, maintaining, construction, and/or the inspection of tools, dies, jigs, powerfeed, etc.

• 5+ years of experience in machine shop processes, geometric dimensioning & tolerances, and machining capabilities of different types of materials.

• 2+ years of experience using complete set of toolmaker shop equipment (milling, lathe, precision, grinding, polishing, and fitting).

Preferred Qualifications:

• 5+ years of experience as a Tool & Die Maker.

• 2+ years of experience with hydraulics and pneumatics.

• Completed an approved Mold Maker or Tool and Die Maker state apprentice ship program and/or certified by the U.S.

• Ability to perform machining operations with a specified degree of accuracy and within a timely manner, maintain close and exacting tolerances and finish requirements ensuring highest quality workmanship on all tools, gages, and fixtures with minimal scrap.

• Capable of creating a repeatable setup and working to tolerances of +/-.0002" in controlled environment.

• Possesses 4 and 5 axis CNC skills for mill or lathe, and extensive knowledge of detail cutting tool geometry for different cutting tool types and materials.

• Ability to reverse engineer and manufacture mold components within time limitations

• Ability to read and write G and M code with CAM programming experience.

Conflict of Interest:

Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• This position offers relocation based on candidate eligibility.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $40.00/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Jul. 31, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Painter Spray B to join our Paint team in the Puget Sound in Washington. 

As a Painter Spray B, you will be a key player in our commitment to delivering high-quality finishes on aircraft components. Candidates must have the ability to see color accurately, as your expertise in applying various coatings, including primers and protective finishes, will ensure that every part meets stringent quality standards. You will prepare surfaces meticulously, utilizing your skills to remove corrosion and perform chemical reactivation as needed. Your attention to detail will be critical as you operate curing ovens and monitor time-sensitive materials, ensuring that all processes adhere to established specifications. Additionally, you will collaborate with team members to maintain an efficient workflow, contributing to a safe and compliant work environment. 

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.  

Position Responsibilities: 

• Spray and/or brush prime, finish prime, and protective coatings to aircraft detailed parts and assemblies in accordance with blueprints and specifications. 

• Prepare surfaces to ensure proper adhesion, including the removal of corrosion and paint stripping, as well as performing chemical reactivation of painted surfaces. 

• Perform rework and touch-up painting using spray and brush techniques per BAC specifications. 

• Prepare various paint materials, such as primers, enamels, and lacquers, according to BAC specifications. 

• Clean and service spray guns, paint tanks, brushes, hoses, and related equipment after use. 

• Mask and unmask areas as required to facilitate painting operations, following drawings and specifications. 

• Set up all equipment and supplies necessary to perform work assignments. 

• Operate curing ovens and related equipment, ensuring they function properly for the current painting process and documenting as required. 

• Monitor and maintain time-sensitive materials and processes, ensuring compliance with operational standards. 

• Review work instructions to support the division of work for incoming orders and ensure compliance with quality requirements. 

• Part mark and wrap finished parts and assemblies as required per BAC specifications. 

• Obtain and maintain necessary certifications and qualifications for the role. 

• Screen work instructions to ensure clarity and adherence to specifications. 

• Coordinate with team members to ensure efficient workflow and adherence to schedules. 

• Document equipment functionality and any adjustments made during the painting process.  

Physical Demands and Potential Hazards: 

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.  

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. 

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee 

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. 

Basic Qualifications:  

• Experience prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.

• Experience using and maintaining various types of paint equipment and applicators, such as HVLP, pneumatic, electrostatic, and others.

• Experience using basic math (e.g. addition, subtraction, multiplication, division, & ratios).

• Experience handling and disposing hazardous materials per government regulations.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to use and operate low impact vibratory tools (sander/buffer).

• Ability to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times.

Preferred Qualifications: 

• Experience performing aircraft or autobody painting and finishing operations.

• Experience utilizing and following detailed work instructions.

Typical Education & Experience:  

High school graduate or GED preferred. 

Relocation: 

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. 

Drug Free Workplace: 

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. 

Union Representation Statement:  

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. 

Shift Work Statement:  

• This position is for a variety of shifts.  

Total Rewards & Pay Transparency: 

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.    

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.    

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay: $23.32/hour, with potential to earn up to $47.54/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 31, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing is seeking an Aviation Maintenance Technician and Inspector, who holds an active secret or higher security clearance, to perform maintenance, preventative maintenance and alterations on production during and post flight test activities in support of our KC-46 Tanker in Tukwila, WA.

Position Responsibilities:

• Troubleshoot, inspect, test, repair, service aircraft and engine systems to prepare aircraft for flight.

• Perform Quality functions such as Customer and DCMA Coordination, Configuration Change Verification, Conformity Inspections, Airworthiness Inspections (including Pre-flight and Post-flights), Corrective Action and Investigations.

• Initiate and document any nonconforming materials, hardware, software, tools, parts, assemblies, or portions thereof, according to specifications, processes, and procedures.

• Perform Aviation Maintenance Technician Inspector tasks in order to obtain and maintain knowledge, skills and required certifications.

• Initiate and document any nonconforming materials, hardware, software, tools, parts, assemblies, or portions thereof, according to specifications, processes, and procedures.

• Perform audit/surveillance of all manufacturing and quality assurance processes, according to specifications, processes, and procedures.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at the listed location.

This position requires an Active Secret U.S. Security Clearance. (A U.S. Security Clearance that has been active in the past 24 months is considered active.)

Basic Qualifications (Required Skills/Experience):

• Minimum 3 years of aircraft maintenance experience with military, airline or certificated repair station background.

• This position requires an individual when working at heights to utilize fall protection equipment that has weight limitations.

• Must be able to work any shift and overtime as required

Preferred Qualifications (Desired Skills/Experience):

• Prefer a valid FAA Airframe and Powerplant Certificate preferred. Please note your certificate number on your resume if you are certified.

• Preferred experience in and/or education in Flight Controls, Avionics electronics/systems, and Analysis.

• Prior military experience and working with military customers

Relocation:

This position offers relocation based on candidate eligibility.

Shift:

This position is for 2nd shift (Subject to change)

Additional Information:

This is an hourly position governed by the International Association of Machinist (IAM-751) Collective Bargaining agreement.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Total Rewards Statement:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. 

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. 

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Please note that the salary information shown below is a general guideline only.  Salaries are based upon candidate experience and qualifications, as well as market and business considerations.  

Summary Pay Range: $35.32/hr. - $62.45/hr.

Candidates must before March 27th, 2026 to be considered for the position

Applications for this position will be accepted until Mar. 27, 2026

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active)

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 2nd shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Aviation Maintenance Inspector to join our Field team in Everett, Washington.

As an Aviation Maintenance Inspector, you will be instrumental in upholding the highest standards of quality and safety within our aircraft maintenance operations. Your primary responsibility will be to conduct thorough inspections of aircraft structures, systems, and components, ensuring compliance with industry regulations and safety protocols. You will meticulously evaluate maintenance work, troubleshoot issues, and document any nonconforming materials or processes to maintain rigorous quality assurance. A Color Vision Certification may be necessary for portions of this job. Your expertise will be essential in performing airworthiness inspections and coordinating with regulatory bodies, ensuring that all aircraft are flight-ready and meet stringent specifications.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Conduct audits and surveillance of all manufacturing and quality assurance processes, ensuring compliance with specifications, processes, and procedures.

• Perform quality functions, including customer and FAA coordination, configuration change verification, conformity inspections, and airworthiness inspections (both pre-flight and post-flight).

• Initiate and document any nonconforming materials, hardware, software, tools, parts, or assemblies in accordance with established specifications and procedures.

• Utilize technical specifications, sketches, manuals, and FAA publications to effectively accomplish inspection assignments.

• Maintain all company and FAA-required records and inspection forms, ensuring accuracy and compliance.

• Uphold a safe, clean, and organized work environment while planning and organizing work packages to promote efficient operations and meet predetermined schedules.

• Operate various information systems, including company web-based systems and Microsoft Office products, to perform assigned tasks.

• Interpret and adhere to airworthiness directives, service bulletins, and other approved data to ensure compliance.

• Apply mathematical calculations to set up and use precision measuring tools for accurate measurements of gaps, heights, angles, and hole dimensions.

• Create production aids as needed to facilitate inspection assignments.

• Maintain necessary certifications, licenses, and permits required for the role.

• Exchange information with suppliers, customers, and company representatives to explain or demonstrate operations, tests, or any difficulties encountered.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights up to 35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.62 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process.  Failure to complete the assessment will remove you from consideration.

Basic Qualifications:

• 5+ years of experience with aircraft maintenance inspection on powered aircraft with military, airline or certificated repair station background in electrical systems or complex mechanical systems (e.g. hydraulics, pneumatics, heavy machinery, diesel, construction) (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience).

• Must be willing to work any shift; including days, evenings, nights, and weekends.

Preferred Qualifications:

• FAA Airframe and Powerplant Certificate. Please note your certificate number on your resume if you are certified.

• 10+ years of experience with aircraft maintenance inspection on powered aircraft with military, airline or certificated repair station background in electrical systems or complex mechanical systems (e.g. hydraulics, pneumatics, heavy machinery, diesel, construction) (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience).

Conflict of Interest:

Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• This position offers relocation based on candidate eligibility.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This role is primarily 2nd shift; however, there may be additional shift requirements to support program objectives.

Safety Sensitive Statement:

This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $35.32/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 06, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Aviation Maintenance Technician to join our Field team in Everett, Washington.

As an Aviation Maintenance Technician, you will be essential in maintaining the highest standards of quality and safety in aircraft operations. Your role will involve performing a wide range of maintenance tasks on aircraft structures and systems, where your attention to detail and adherence to safety protocols are critical. A Color Vision Certification may be necessary for portions of this job. You will troubleshoot and inspect aircraft to ensure they are flight-ready, diligently documenting all maintenance activities to comply with industry regulations. Your technical expertise will enable you to execute repairs and modifications effectively, ensuring that all work meets stringent specifications.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform production installations, maintenance, preventative maintenance, and alterations on aircraft structures, systems, and sub-systems, including electrical and avionics, for both standard and experimental certificated aircraft.

• Troubleshoot, inspect, test, repair, and service aircraft and engine systems to ensure they are flight-ready, documenting any nonconforming materials or components according to established specifications and procedures.

• Conduct audits and surveillance of manufacturing and quality assurance processes, including customer/FAA coordination, configuration change verification, conformity inspections, and airworthiness inspections.

• Utilize technical specifications, sketches, manuals, and FAA publications to effectively complete work assignments.

• Maintain company and FAA-required records and inspection forms while ensuring a safe, clean, and organized work environment.

• Plan and organize work packages to promote safe and efficient operations, meeting predetermined schedules.

• Operate various information systems, including company web-based systems and Microsoft Office products, to perform assigned tasks.

• Interpret and adhere to airworthiness directives, service bulletins, and other approved data.

• Apply mathematical calculations to set up and use precision measuring tools for accurate measurements.

• Create production aids as needed to facilitate work assignments.

• Maintain necessary certifications, licenses, and permits for assigned work.

• Exchange information with suppliers, customers, or company representatives to explain or demonstrate operations and tests.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights up to 35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.62 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process.  Failure to complete the assessment will remove you from consideration.

Basic Qualifications:

• 3+ years of experience with aircraft maintenance on powered aircraft with military, airline or certificated repair station background (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience) OR with troubleshooting electrical systems or complex mechanical systems (e.g. hydraulics, pneumatics, heavy machinery, diesel, construction).

• Must be willing to work any shift, including days, evenings, nights, and weekends.

Preferred Qualifications:

• FAA Airframe and Powerplant Certificate. Please note your certificate number on your resume if you are certified.

• 5+ of aircraft maintenance experience on powered aircraft with military, airline or certificated repair station background (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience)

Conflict of Interest:

Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• This position offers relocation based on candidate eligibility.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This role is primarily 2nd shift; however, there may be additional shift requirements to support program objectives.

Safety Sensitive Statement:

This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $35.32/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 06, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Skin & Spar Surface Finish Technician to join our Fabrication team in Auburn, Algona and Puyallup, Washington.

Join our dynamic team as a Skin & Spar Surface Finish Tech, where precision meets innovation in the aerospace industry. In this pivotal role, you will leverage your expertise in interpreting blueprints and engineering specifications to execute meticulous surface finishing and conditioning on critical components such as milled skins and spars. Utilizing advanced templates and jigs, you will ensure optimal positioning for finishing operations, while employing a variety of hand and power tools to achieve exceptional quality standards. Your keen eye for detail will be essential as you diagnose discrepancies, perform thorough inspections, and conduct necessary rework to meet stringent gauge tolerances. Collaborating closely with supervisors and engineering teams, you will navigate complex work orders and utilize online systems to prioritize tasks effectively. Your commitment to safety and compliance will shine through as you handle hazardous materials responsibly and maintain certifications. If you are passionate about delivering excellence in aerospace manufacturing, we invite you to be a part of our mission to shape the future of flight.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Work from blueprints, templates, detail drawings, and verbal instructions to perform surface finish/conditioning on coordination holes in milled skins and spars.

• Use templates and jigs to properly position parts for subsequent finishing operations, including reaming, countersinking, and cold work.

• Scribe tooling locations and reference lines as specified in engineering drawings and specifications.

• Diagnose and correct any detected discrepancies in parts and processes.

• Check finished parts to ensure they meet quality requirements and specifications using precision measuring instruments (e.g., micrometers, trammels, probes).

• Use hand and power tools, including air motors, reamers, and cold-work guns, to perform finishing duties on machined parts.

• Operate ground-controlled handling equipment to load, unload, and move parts within the shop.

• Perform rework as required, including filing, scraping, sanding, grinding, and hand finishing to meet gauge tolerances.

• Locate points and holes from established reference lines or index points using prints, templates, and work orders.

• Perform visual and functional checks on tools and accessories, making necessary adjustments and ensuring they are in good condition.

• Access workload using online computer systems and assign work based on priority or Team Leader direction.

• Review Work Order (W/O) to determine work requirements and ensure prior operations are complete.

• Consult with supervisor/team lead and other sources (e.g., engineering, planning, inspection) to resolve problems.

• Call for inspection or use SI&A as required throughout the process, including checking hole sizes and inspecting countersinks.

• Handle and dispose of hazardous materials in an approved manner while maintaining personal and tool certifications, ensuring compliance with safety standards.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Basic computer experience and competency.

• Experience using basic math (e.g. addition, subtraction, multiplication and division).

• 1+ years of experience or training in reading and interpreting drawings or blueprints.

• 2+ years of experience using hand tools and/or hand-held power tool

• Able to close tolerance drill within .003 and able to precision measure between .003.

• Able to lift, push and pull up to 35 pounds frequently within an 8 hour shift.

Preferred Qualifications:

• 2+ years of experience providing close tolerance measurements and cuts on close tolerance holes.

• Ability to close tolerance.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $25.32/hour, with potential to earn up to $54.76/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 23, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Helper Manufacturing to join our Fabrication team in Algona and Auburn, Washington. 

Join our innovative manufacturing team as a Helper, where your contributions will play a vital role in the production process. In this dynamic position, you will utilize a variety of hand and power tools to perform essential tasks such as sorting, cleaning, and preparing parts for assembly and finishing. Your attention to detail will ensure that identification markings are accurately applied, while your organizational skills will help maintain a clean and efficient workspace. You will collaborate closely with skilled employees, assisting in mechanical and paint duties, and ensuring safety protocols are followed in high-stakes environments. Your ability to operate specialized equipment, such as the video jet marking machine and anodizing processes, will be crucial in supporting our production goals. If you are passionate about contributing to a team that values quality and precision in manufacturing, we invite you to be a part of our mission to deliver excellence. 

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities:

• Perform various duties using hand or power tools, including staking, filing, trimming, sawing, buffing, drilling, sanding, and filling to facilitate assigned tasks. 

• Sort, count, wrap, unwrap, and clean parts, tools, assemblies, or equipment as required. 

• Maintain cleanliness and organization of work areas by sweeping, cleaning, and picking up materials and parts. 

• Move, pack, and unpack boxes, materials, parts, tools, and equipment, ensuring proper handling and storage. 

• Apply identification numbers or letters (part marks) to parts, materials, or assemblies using various marking methods (e.g., steel, rubber, electro-etch). 

• Rack and unrack tubes and materials, applying dust caps and seals, and verifying configuration discrepancies against samples. 

• Assist higher classification employees with mechanical and paint duties, including filling pots, moving lifts, and setting up/removing painting equipment. 

• Maintain surveillance in paint and assembly areas, ensuring safety procedures are followed and assisting incapacitated employees as needed. 

• Perform masking processes, including applying masking tape and protective materials to parts in preparation for painting or plating operations. 

• Finish contoured and flat surfaces to required specifications using abrasive materials prior to and after painting, including hand touch-ups. 

• Clean and service paint spray application equipment, including tanks, brushes, and hoses, after use. 

• Review Work Orders (WOs) and drawings to determine work requirements and obtain necessary tools and specifications using online computing equipment. 

• Operate and maintain the video jet marking machine, ensuring proper fluid levels and cleanliness of heads. 

• Assist in the anodizing process by loading and unloading detail parts on/off the load bar and performing low-pressure tests on tubing. 

• Count, load, and protective wrap finished production parts for shipment to the next operation, and log completed jobs into the Decac MRM system. 

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.  

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. 

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee 

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. 

Basic Qualifications:

• 1+ years of experience using basic math (e.g. addition, subtraction, multiplication and division)

• 1+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design)

• Must be able to lift, push and pull up to 35 pounds frequently within an 8-hour shift

• Must have basic computer experience and competency skills

Typical Education & Experience:

High school graduate or GED preferred. 

Relocation: 

Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. 

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. 

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. 

Shift Work Statement:

This role is primarily second shift; however, there may be additional shift requirements to support program objectives.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.    

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.    

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay: $21.32/hour, with potential to earn up to $48.70/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 25, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.