Bioconductor Install Jobs in Usa

ESSENTIAL DUTIES AND RESPONSIBILITIES

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.

• Timely and proper inspection, repair, maintenance, and installation of customer equipment in a manner that exceeds customer expectations and that is consistent with Rite-Hite's image as the industry leader in customer service.

• Develop and maintain good customer relations in a manner that exemplifies Rite-Hite's image and commitment to customer service.

• Compliance with all company policies and safety guidelines.

• Perform installation, inspection, and repair of equipment in the field in an expeditious manner while assuring the customer's needs are met and exceeded. This is mainly accomplished individually but may sometimes be accomplished in small teams.

• As skills and knowledge develop, guide other Service Technicians with less skills/knowledge through complex problems in the field. This may include training other Service Technicians in the proper field installation, service and repair of equipment and proper administrative procedures instilling Rite-Hite's commitment to customer service.

• Using the handheld devices (or paper backup forms if needed) accurately complete all necessary paperwork associated with field service, repair, and installation, including service tickets, timesheets, open job tracking form and safety analysis sheets.

• Maintain compliance with operation and communication standards as per the Field Service Technician Handbook.

• This position requires the operation of a service vehicle in compliance with DOT Driver Qualification standards, as well as truck-based cranes, forklifts, welders, torches, and power and hand tools.

• Follow all customer-specific requirements, policies, safety guidelines and directions on their work sites.

• Work closely with all other departments in the company, communicating and coordinating activities to efficiently maximize customer satisfaction.

• "Occasional (under 20% annually) domestic overnight travel may be required for training, supporting customers at other offices, etc. may be required."

• Other duties may be assigned.

The pay range for this position is $20-35. We take geographic differentials into consideration in areas of higher cost of living. We offer nine paid holidays (New Year's Day, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Day After Thanksgiving, Christmas Eve, Christmas Day and New Year's Eve). New employees are eligible for up to two weeks of vacation (pro-rated based on hire date within 1st year of employment). We offer additional paid time off based on tenure. Based on time in the job, you will be eligible for additional PTO (vacation, sick leave, etc.). We offer 72 hours PTO (1 hour for every 40 worked) to employees in Colorado.

EDUCATION and/or EXPERIENCE

The successful individual will possess:

• High school diploma or general education degree (GED); and

• One to five year's experience in repair and service of hydraulic, mechanical, and electrical equipment

KNOWLEDGE / SKILL REQUIREMENTS

The ideal individual will demonstrate:

• Service Technicians must have a valid drivers license

• Passing DOT medical exam

• Applicable driver qualification standards at all times.

• Ability to read and interpret documents such as safety rules, blueprints & schematics, operating and maintenance instructions, and procedure manuals.

• Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.

• Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.

• Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.

SUPERVISORY RESPONSIBILITIES:

This role will not have supervisory responsibilities.

Arbon Equipment - A Rite-Hite Company is the global leader in the manufacture and distribution of industrial loading dock and door equipment. Our innovative products and world class sales organization ensure solid, consistent growth, both for our company and our staff. We are always looking ahead to develop innovative new products and services to improve our customers' safety, security, and productivity.

Arbon Equipment - A Rite-Hite Company provides competitive compensation and a comprehensive benefits package with medical, dental, and vision coverage along with life and paid medical leave. We also provide a retirement savings plan that combines 401(K) with company match and profit sharing. Paid holidays, vacation, and up to five paid personal/sick days per year round out the package.

Rite-Hite is an Equal Opportunity/Affirmative Action employer offering a drug free workplace for our customers and employees.

Are you ready to build a rewarding and lifelong career? Do you thrive in a team environment that challenges you to be your best? Join 84 Lumber, a family-owned company founded on growth, stability, and the mindset that “nothing is impossible”. 84 Lumber is hiring immediately and has the perfect career opportunity for you!

WHO IS 84?

84 Lumber is the nation’s largest privately held supplier of building materials, manufactured components and industry-leading services for residential and commercial construction. With over 320 facilities in 34 states and plans for even more locations, your opportunities for growth within the company are endless. If you invest in yourself, we will invest in you!

At 84 Lumber, we promote nearly 100% from within, creating a unique environment where you can build your own career path. Over 96% of our store managers began as Manager Trainees, and on average, you can earn your first promotion within six months.

COMPREHENSIVE BENEFITS PACKAGE:

We offer all the benefits you expect from an industry leader, including:

• Paid Time Off (PTO), sick and personal days
• Medical, dental and vision insurance
• Holiday pay
• Flexible Spending Accounts (FSA) for medical and dependent care
• Annual profit sharing and 401(k) with employer match (based on company profits)
• Discounts on building materials and other retail partnerships

RECOGNITION & Awards:

In 2024, 84 Lumber was proudly recognized as one of:

• America’s Most Trustworthy Companies by Newsweek
• Top Retailers by USA Today
• Largest Private Companies by Forbes
• Fastest-Growing Companies by 5000.

The Framing Manager is responsible for the supervision of, and coordination with, independent subcontract framing crews working on 84 Lumber projects. This position is responsible for training, supervising and directing the work of framing installation crews, developing labor cost budgeting, maintaining production or installation records for use in supervision or control, planning framing installation work, apportioning the work among the framing crews, controlling the flow and distribution of materials or merchandise and supplies, monitoring or implementing contract compliance, providing for the safety and security of the framing crews and addressing and adjusting common inquiries and/or complaints from customers.

Responsibilities:

• Managing the installation of wood component systems, doors and windows, siding (wood and cement), shingles, insulation, drywall, and trim
• Recruiting independent subcontractors holding the proper licenses and insurance
• Labor cost budgeting
• Development of job specific scopes of work including schedule
• Daily jobsite inspections for quality and schedule to ensure compliance with blueprints and the specifications
• Conducting daily safety inspections
• Ensuring the companies compliance with contract documents
• Preparing daily reports, job diaries, narratives and other special documentation as determined by the company and by the projects needs

Qualifications:

• Word Processing Software
• Excel Software
• Outlook Software
• Exercising discretion and independent judgment in responding to and adjusting common inquiries or complaints from customers
• Ability to read and comprehend documents (i.e. policy and procedure manuals); write routine reports and correspondence; speak/present in front of a small group
• Ability to apply common sense understanding to carry out instructions furnished in written, oral or diagram form; deal with problems involving several concrete variables in standardized situations.

Equipment & Installation Technician – Texas City, TX

Company: Preston Rentals LLC | Website:  Us:

Preston Rentals LLC is a leader in materials handling technology for the construction industry, with over 30 years of experience. Known for innovation, efficiency, and safety, we provide top-quality rental equipment nationwide.

The Role:

In this dynamic role, you'll primarily operate from our Texas yard. Engaging in hands-on manual labor, including routine maintenance tasks such as painting, concrete chipping, and rust grinding. Additionally, you'll be responsible for inspecting and preparing heavy equipment at our facility, as well as traveling across the US to support various construction teams with the initial installation of Superdeck® platforms. As a crucial part of the installation process, you'll provide on-site training orientations for construction teams, ensuring the safe and efficient use of our equipment.

What You’ll Do:

• Travel nationwide to support construction teams and install equipment.
• Public speaking, train crews on equipment use and safety procedures.
• Inspect, load, and unload heavy equipment.
• Inventory Control.
• Perform maintenance and hands-on work: cleaning, painting, concrete chipping, rust removal.
• Assemble/disassemble Superdeck® platforms and SuperCranes®per manufacturer and engineer specs.
• Manage inventory, tools, and parts for each project.
• Follow OSHA and company safety standards.

What We’re Looking For:

• Experience with heavy equipment and construction operations preferred.
• Ability to travel and work in varied outdoor environments.
• Physically capable of lifting/carrying up to 75 lbs and performing demanding manual labor.
• Valid driver’s license and PC literacy.
• Strong communication skills in English and ability to train crews.
• Self-starter, reliable, and team-oriented.

Bonus Skills:

• Forklift, rigging, or welding experience.
• Ability to read engineering specs.
• Previous construction experience.

Why Preston Rentals:

• Work on exciting projects across the country.
• Hands-on, dynamic role with growth and training opportunities.
• Be part of a company recognized for safety, quality, and innovation.

Work Environment:

• Outdoor work in all weather conditions.
• Physically demanding tasks, including working at heights.

Ready to Join? Apply today and start your career with Preston Rentals!

Job Summary

Reporting to the Installation Manager the HVAC/R Installation Technician is responsible for install ventilation, air conditioning, refrigeration systems and equipment; inspect and perform tests on systems and equipment at start-up to assure proper functioning. This position has constant contact with the Project Managers and Sales Engineers to receive installation detail and communicate project requirements and results. This position has frequent contact with customers, requiring reasonable tact and strong verbal/written communication skills.

Responsibilities

Customer Service

• Always present a professional positive and helpful attitude when interacting with customers and co-workers.
• Exhibit an understanding of Human Relations and functions as a “team player”.
• Observe additional maintenance needs requiring attention and report to the appropriate people.

Work Condition and Paperwork

• Organize all work detail (work performed, service recommendations, etc.) and complete an accurate work ticket for billing and payroll purposes. Submit all paperwork to the office each Monday before 10:00 AM or at end of each month is required.
• Obtain, record on work ticket and communicate to vendor an appropriate purchase order number when purchasing job-related parts and supplies.

Essential Functions

• This is a physically demanding job involving heavy physical labor, often in adverse conditions and uncomfortable positions.
• Loads van with equipment and tools and drives van to and from job sites.
• Moves equipment (such as furnaces, compressors, blowers, heat pumps, heat exchangers, duct work, pipes and cables, controls, etc.), supplies and tools (hand and power) to designated areas of job sites.
• Perform associated plumbing and electrical work including making terminal connections.
• Must be able to perform all job activities at heights, working off ladders, scaffolds, roofs, platforms, etc.

Job Qualifications

• Must have valid Michigan drivers’ licenses, good driving record (our insurance must accept you)
• High school diploma or GED preferred
• Read and write English
• Write legibly
• Read a tape measure, perform basic math skills: (Add, Subtract, Fractions, Calculate sales tax)
• Paperwork filled out properly daily.
• Follow verbal and written instructions.
• Follow all safety rules and procedures.
• Be able to wear all P.P.D’s when applicable (steel toe boots, gloves, safety glasses, hard hat, etc.)
• Must be able to wear respirator.
• Lift, climb, bend, and kneel to complete assigned tasks.
• Tolerate working at heights off a ladder or scaffold, on roofs, aerial lifts, etc.
• Perform heavy physical labor during adverse weather conditions.
• Work in confined spaces, exposed to fumes, chemicals, grease, acids, oil and in the vicinity of noise and vibration with proper P.P.D’s.
• Maintain cooperative and effective working relationship with others.
• Be available to work any time of the day to take care of your customer. (Before 8:00 am and after 5:00 pm during the week, any time weekends and holidays)
• 4 hours safety training required annually
• Must have refrigerant transition and recovery certification card (levels 2-3)
• Continuing education is expected.

Physical Requirements

• Lift 50 lbs. frequently, 100 lbs. occasionally, and 100+ lbs. with assistance
• Climbing (ladders, stairs, etc) (frequently with tools or equipment in hand)
• Bending, stooping, twisting, and squatting
• Extended periods of walking
• Regular exposure to weather conditions
• Operating a motor vehicle, Hi-low, forklifts, etc.
• Owning and operating power or hand tools-from floor to above head (drilling often over your head and/or awkward positions)
• Exposure to potentially harmful chemicals or materials with proper P.P.D’s

Non-essential duties and responsibilities

• Performs other duties as assigned by management

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is hiring Associate, Mid-Level, or Senior Manufacturing Engineers to support operations in Moses Lake, WA. Positions will support the 737 programs within the Interior Responsibility Center, Propulsions, or Electrical Systems Responsibility Center. Successful candidates will thrive in a fast-paced environment and collaborate effectively with engineering teams and mechanics on the factory floor.

Primary Responsibilities:

• Integrate across engineering disciplines to drive producibility requirements into the design of aircraft electrical and mechanical systems using Design for Manufacturing and Assembly (DFMA) principles.
• Participate as a member of an Integrated Product Team (IPT) to develop, identify, and implement conceptual designs and maintain the program architecture for build.
• Implement technical solutions into the build plan to ensure production safety, stability, and product reliability; lead the complex integration of systems into a repeatable, efficient installation process.
• Analyze and improve design/build concepts and collect and analyze production data to identify anomalies and investigate root causes when first-pass quality or production efficiency fall outside standards.
• Troubleshoot and resolve technical problems arising during production to preserve product integrity and minimize impacts to performance, cost, or schedule.
• Drive innovative tooling and equipment requirements to enable earlier, more ergonomic, and more efficient installation and testing of electrical components.
• Apply technical knowledge to design and develop manufacturing and assembly processes, tooling, fixtures, and procedures; assist in the development and implementation of production and tooling methodologies.
• Assist in implementing manufacturing plans, new engineering principles, theories, advanced technologies, and concepts across teams, including electrical systems design, equipment installation, and functional test.
• Develop and implement process improvements using Lean production methodologies and assist in the implementation of Lean principles and technologies.
• Regularly engage with mechanics, electricians, suppliers, IPTs, and internal customers to identify and implement opportunities to improve the efficiency and reliability of the aircraft build plan and to develop products, skills, and knowledge.
• Coordinate with production and design engineers across commodities to ensure integration of electrical systems with all other interfacing airplane components (structures, interiors, etc.).

This is a Production Engineering role requiring direct interface with people, parts, and equipment on the production floor. A typical day may include:

• Spending extended periods on your feet (up to 8 hours), standing and walking on the production floor.
• Climbing ladders or stairs to access equipment or airplane sections.
• Working at heights or in confined/tight spaces.
• Wearing required personal protective equipment (PPE).

Basic Qualifications (Required Skills/ Experience):

• Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science
• 2 or more years of experience working in an engineering discipline

Preferred Qualifications (Desired Skills/Experience):

• Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process
• (Mid-Level) 3 or more years' related work experience or an equivalent combination of education and experience
• (Senior) 5 or more years' related work experience or an equivalent combination of education and experience
• Experience working in a production environment
• Experience using AutoCAD and/or CATIA

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation:

This is a union-represented position.

In locations where SPEEA representation applies, this job family will be covered by the terms of the collective bargaining agreement. Applicable and appropriate educational/certification credentials from an accredited institution and/or equivalent experience is required.

Pay and Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage, and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range for Associate (Level 2): $85,000 – $115,000

Summary pay range for Mid-Level (Level 3): $103,700 – $140,300

Summary pay range for Senior (Level 4): $126,650 – $171,350

Applications for this position will be accepted until Mar. 23, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description:

We are looking for a dedicated Service/Installation technician with Construction Experience, to join our Electronic Systems Division. Our technician position will be responsible for the completion of assigned tasks in our construction projects division as well as our day-to-day service operations. This position will focus on our existing customer base, general contractor base, and electrical contractor base to provide excellent customer service and overall satisfaction. Our goals for this position will be to maintain control of the installation schedules, cost structure of the work, quality of the work performed, and most importantly the satisfaction of our customer base. This position will report directly to the department Operations Manager but also communicate with the department coordinators, other field technical team members, and other aspects of our organization. We are looking to grow the team! We offer a signing bonus & we have amazing benefits, great pay, steady work, and job security.

Our expectations of this position include the following but are not limited to:

• This person is a motivated self-starter who works with a sense of urgency, is detail focused, well organized and who works well in a fast-paced environment.
• Service, troubleshoot, program, and maintain fire alarm systems, access control systems, CCTV systems, and intrusion systems for various customer types
• Be available for overtime when required as well as participate in the on-call scheduled rotations
• Complete detailed reports of work completed for submission to the customer
• Maintain a professional appearance and demeanor with both our external and internal customers
• Be able to communicate effectively with our customer base while providing a high level of customer service
• Can attend out of state training when it is presented as well as participate in local training to maintain the skills necessary to continue serving our customer base
• Complete any additional assignments above and beyond their normal work duties

Qualifications

• Minimum 3+ years of electronic systems experience in the industry with preference to fire alarm equipment and systems
• Ability to work on various types of equipment to include but not limited to; Edwards, Honeywell, Notifier, Silent Knight, FireLite. Edwards certifications preferred but not required
• Outstanding verbal, written, and listening skills
• Proven ability to work effectively in a group environment as well as independently to achieve the goals set forth by the organization
• NICET Level II preferred but not required
• Organized, self-motivated, and the ability to work independently
• Ability to travel within our geographical area without any restraints
• Ability to work under pressure and time constraints of the business needs
• Excellent skills using basic Microsoft functions to include but no limited to Word, Excel, Outlook, Project, etc.

Skills:

Fire Alarm, Access Control, CCTV, customer service, EST4 cert, electronic security

Salary:

Up to $40 an hour

Required Skills & Experience

- 5+ years of pharmaceutical engineering experience – specifically with hands on installation of pharmaceutical equipment

- Background in pharma/life sciences

- Degree in either of the following: Chemical or Mechanical engineering

- Experience working cross functionally on large scale capital projects

- Extensive experience operating independently and balancing multiple/changing priorities

Nice to Have Skills & Experience

- Understanding/experience working with bioreactors, WFI systems, alarms, instrumentation, etc.

Job Description

Insight Global is looking for an Engineer to join one of our largest pharmaceutical clients onsite 5x/week in Rensselaer, NY. This individual will be joining the Engineering team within the Engineering and Automation space to assist in the design phase and general work of bringing multiple new process areas online in addition to assisting in day-to-day engineering tasks. This candidate will be expected to act autonomously in support of FTE engineers who will owning general work scopes including but not limited to instrumentation work, manufacturing process areas, detailed design phase assistance for new builds, commissioning, alarm testing, etc. They will be working with multiple cross functional manufacturing and process teams across the business and will be expected to be able to handle multiple competing priorities. The client is ideally looking for someone with proven technical expertise who is also a self-driven, forward-thinking individual able to anticipate gaps and assist with minimal guidance where needed.

Our client who is a global leader in industrial machinery installations is seeking candidates for the below postions to support a 1+ year large scale project in De Soto, Kansas. These are traveler roles and all expenses are paid. Direct Hire opportunity.

• Procurement Agent
• Quantity Surveyor
• Project Scheduler
• Project Controls
• Project Accountant
• Materials Manager
• Quality Manager
• Project Managers
• Superintendents

If you have interest in discussing further, please reply with your resume or email directly to

• 
  
• Must be able to perform general labor duties on a job site as indicated by the employer.
  
• Must have the ability to work in an outdoor environment, under timelines, and work with a team as well as alone.
  
• Must have the ability to perform basic math functions as needed.
  
• Must have the physical ability to:
  
  • 
    
  • Stand for up to 8 -10 hours
    
  • Lift up to 50 lbs unassisted
    
  • Squat down and reach above the shoulder frequently throughout the day
    
  • Must have corrected vision and hearing
    
  
  
  
• Ability to operate construction machinery and equipment safely.
  
• Valid NY Driver's license.
  
• Perform all other activities as indicated by the employer based on project need.
  

• 
  
• Prioritize safety and quality of work each day.
  
• Demonstrate the willingness to learn the trade.
  
• Ability to follow oral and written directions.
  
• Operate motor vehicle safely and courteously.
  
• Work closely and directly for the team foreman.
  
• Report any personal injury to the foreman immediately,
  

• 
  
• Paid time off
  
• 401(k) matching
  
• Health insurance
  
• Retirement plan
  
• Military leave
  
• HRA
  
• Vision Insurance
  
• Dental insurance
  
• Disability insurance
  
• Life insurance
  
• Paid holidays
  
• Flexible schedule
  

• This position requires an active DoD Clearance (Secret, Top Secret, Top Secret/SCI) or the ability to be obtain an (Interim Secret, Interim Top Secret)

• Because an active or interim DoD clearance is required, U.S. Citizenship is required 

Job Description

Responsibilities

• This technician will support a large federal agency's Network Infrastructure through survey, design, and deployment of structured networks and will be responsible for the upkeep of the security posture of the environment
• This is accomplished through projects such as new installations, life cycle replacement projects, Cable Plant and wireless installations that are compliant with commercial, TEMPEST, and NIST standards
• Lead network survey, design and installations under direction of the government
• analyze, test, troubleshoot, and evaluate existing network systems, such as local area networks (LAN), wide area networks (WAN), cloud networks, servers, and other data communications networks.
• Perform network maintenance to ensure networks operate correctly with minimal interruption.
• Knowledge of DISA network topologies and standards
• Topology and rack elevations using Visio
• Create detailed Site Survey reports detailing a site's current infrastructure, NIST and TEMPEST compliance, along with design recommendations
• Configure, install, test, certify, and troubleshoot network infrastructure cabling
• Ensure Network cabling infrastructure is compliant with current NIST and TEMPEST Standards
• Build and install equipment racks
• Install, dress, label, and terminate Cat6 and Fiber cable in telecommunications rooms
• Test and troubleshoot network infrastructure issues on SIPR and NIPR networks
• Create accurate reports and documentation to design/certify network infrastructure
• Track, manage, and ensure project tasks are completed in a timely manner
• Develop Bills of Material (BOM) for network plant design requirements
• Plan and perform preventive maintenance and scheduled upgrades (Life-cycle replacements)
• Investigate physical faults in the network
• Report network infrastructure deployment status to key stakeholders

Qualifications

• Must hold an active Secret security clearance
• (US Citizenship required)
• Security + Certification 

Additional Requirements:

• Organizes and directs network installations on site surveys.
• Assesses and documents current site network configuration and user requirements.
• Designs and optimizes network topologies.
• Directs and leads preparation of engineering plans and site installation Technical Design Packages.
• Develops installation schedules.
• Mobilizes network installation team.
• Directs and leads preparation of drawings documenting configuration changes at each site.
• Prepares site installation and test reports.
• Coordinates post installation operations and maintenance support.

Skills

Network engineering, Router, Firewall, Troubleshooting, Infrastructure, Ccna

Top Skills Details

Network engineering,Router,Firewall,Troubleshooting,Infrastructure,Ccna

Additional Skills & Qualifications

In addition to standard installer skillsets, candidates should possess the following:

• Cable installation and termination (fiber and copper)

• Rack and stack of network equipment

• Basic troubleshooting and testing of network connections

• Ability to read and follow network diagrams and installation plans

• Familiarity with structured cabling standards and labeling

Candidates with networking certifications (e.g., Network+, CCNA, Aruba, Versa) will be preferred.

Experience Level

Expert Level

This is a Contract position based out of Fort Meade, MD.

The pay range for this position is $39.00 - $40.00/hr.

Eligibility requirements apply to some benefits and may depend on your job
classification and length of employment. Benefits are subject to change and may be
subject to specific elections, plan, or program terms. If eligible, the benefits
available for this temporary role may include the following:

• Medical, dental & vision
• Critical Illness, Accident, and Hospital
• 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
• Life Insurance (Voluntary Life & AD&D for the employee and dependents)
• Short and long-term disability
• Health Spending Account (HSA)
• Transportation benefits
• Employee Assistance Program
• Time Off/Leave (PTO, Vacation or Sick Leave)

This is a fully onsite position in Fort Meade,MD.

This position is anticipated to close on Mar 24, 2026.

We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

We’re a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We’re a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We’re strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We’re building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at .

The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Type: Full-Time Year-Round
Industry: Residential HVAC Installation
Compensation:$80k -$100k annually
Earning potential over $110k/year based on performance

American Residential Services (ARS) is the largest provider of residential HVAC, heating, air conditioning, plumbing, and electrical services in the United States. With over 7,000 employees and 45+ years of experience, ARS delivers trusted residential HVAC installation, heating and air conditioning service, and home comfort solutions to homeowners nationwide.

We are hiring experienced HVAC Lead Installers to install residential heating and air conditioning systems, including furnaces, heat pumps, air conditioners, and complete HVAC systems.

• Insurance benefits available after 31 days

• Low-cost medical (as low as $5/week), dental, and vision

• HSA/FSA options

• 401(k) with company match

• 13 days PTO + 8 paid holidays

• Company-paid life insurance

• Take-home vehicle + gas card

• Uniforms provided + cleaning service

• Weekly direct deposit

• Ongoing HVAC training and career advancement

As a Residential HVAC Lead Installer, you will:

• Remove and replace outdated HVAC systems, including furnaces, heat pumps, and air conditioning units

• Install complete residential heating and air conditioning systems following manufacturer specifications and HVAC codes

• Lead residential HVAC installations with support from an assigned HVAC installer helper

• Start up, test, and troubleshoot newly installed HVAC equipment

• Ensure all HVAC installation work meets safety, quality, and inspection standards

• Deliver professional service and maintain a clean job site during every HVAC installation

This is a full-time, year-round HVAC installation position with consistent work and strong earning potential.

• Minimum 3 years of residential HVAC installation experience

• Experience installing heating and air conditioning systems

• Comfortable leading HVAC installs with a helper

• Working knowledge of local HVAC inspection codes

• EPA Certification (or ability to obtain)

• Valid driver's license with good driving record

• Ability to lift heavy HVAC equipment and work in attics or crawlspaces

• Must pass background check and drug screening

For questions about the role, you may contact our recruiting team at

Note: This posting outlines potential pay ranges and opportunities, which are not guaranteed and do not represent a formal offer. Additional compensation may be offered based on experience and will be outlined in an offer letter addendum. ARS is an equal opportunity employer and does not discriminate based on race, color, religion, sex, national origin, age, disability, or any other protected status under applicable federal, state, or local laws. Privacy policy available upon request.

Lead Installer and Trainer

Location: On-Site | Las Vegas, NV

Work Schedule: Full-time, Monday - Friday, daytime hours. Schedule may adjust based on installation demands and travel requirements.

Travel Requirements: Occasional regional travel as projects require.Flexibility to work extended hours during active installation cycles.

A rapidly growing residential vertical transportation company is expanding its Nevada operations and seeking a Lead Installer and Trainer to play a critical role in driving installation excellence and field leadership. This is a high-impact opportunity for a seasoned elevator installation professional who takes pride in craftsmanship, safety, and mentoring the next generation of technicians.

In this role, you will lead full-cycle residential elevator installations, oversee final quality inspections, and develop apprentice installers into future crew leads. If you thrive in a hands-on environment, value precision, and want to shape the standard of excellence across a growing region, this is your chance to step into a visible leadership position.

Key Responsibilities

Installation Leadership

• Lead residential elevator installations from layout through final commissioning.
• Install rails, drive systems, hydraulic components, platforms, cab interiors, hoistway doors, and associated mechanical and electrical systems.
• Conduct final inspections and approve completed installations prior to turnover.
• Maintain clean, organized, and safety-focused jobsites.

Training and Workforce Development

• Mentor and train apprentice installers in technical procedures, code compliance, jobsite standards, and professional conduct.
• Develop structured, hands-on training approaches to prepare junior team members for future leadership roles.
• Reinforce a culture of accountability, safety, and craftsmanship.

Safety and Code Compliance

• Ensure all installations meet applicable safety standards and building codes.
• Proactively identify and mitigate jobsite risks.
• Maintain compliance with applicable elevator code requirements and regional regulations.

Troubleshooting and Technical Support

• Diagnose and resolve issues related to motors, pumps, wiring, safety circuits, switches, and control systems.
• Respond to service needs related to completed installations when necessary.
• Accurately document inspections, repairs, and technical findings.

Communication and Coordination

• Serve as the primary field contact for contractors, homeowners, scheduling teams, and operations leadership.
• Provide consistent job updates and escalate issues appropriately.
• Represent the company with professionalism on every project.

Qualifications

• Minimum 3 years or approximately 6,000 hours of residential elevator installation experience.
• Ability to read blueprints, wiring diagrams, and manufacturer documentation.
• Strong mechanical and electrical troubleshooting skills.
• Proficiency with hand tools, power tools, and diagnostic equipment.
• Demonstrated ability to train, mentor, and lead field personnel.
• High school diploma or GED required.
• Valid driver’s license with acceptable driving record.
• Ability to lift up to 75 pounds and work at heights, on ladders, and in confined spaces.
• Successful completion of background screening and drug testing.

Preferred Experience

• Previous experience in a lead installer or training capacity.
• Residential elevator system experience strongly preferred.
• Strong organizational skills and pride in jobsite presentation.

About Blue Signal:

Blue Signal is an award-winning, executive search firm specializing in various specialties. Our recruiters have a proven track record of placing top-tier talent across industry verticals, with deep expertise in numerous professional services. Learn more at /46Gs4yS

Lead Installation Technician – AVL Systems

Location: MN (Travel Required)

Employment Type: Full-Time

Our client is seeking a Lead Installation Technician to oversee the installation of professional audio, video, and theatrical lighting systems in performance venues, commercial facilities, and houses of worship. This role combines hands-on technical work with crew leadership, ensuring installations are completed safely, efficiently, and to industry standards.

Responsibilities

• Lead installation of AVL systems including audio, video, and theatrical lighting equipment
• Direct and coordinate small installation crews (2–5 technicians) onsite
• Install, troubleshoot, and maintain AVL systems using industry best practices
• Read and interpret CAD drawings and construction documents
• Coordinate with project managers, designers, electricians, and general contractors
• Document installation progress and maintain quality standards
• Provide basic client training and system handoff support
• Prepare tools, equipment, and installation materials for job sites
• Maintain organized shop and installation areas
• Support occasional live event or production work as needed

Qualifications

• 3–7 years of AVL installation experience
• Ability to read schematics and construction drawings
• Experience with cable fabrication, rack assembly, termination, and system installation
• General construction knowledge including mounting equipment and working within finished spaces
• Strong communication skills and ability to interact with clients onsite
• Working knowledge of theatrical rigging preferred
• CTS certification or Power Limited Technician license preferred
• Ability to lift up to 75 lbs., work at heights, and travel for projects

Benefits

• Health, dental, retirement, life, and disability insurance
• Company vehicle provided for work use
• Competitive hourly compensation based on experience

About Theater Outsource

is the entertainment industry’s dedicated recruiting partner — connecting top-tier talent with the companies that bring stages, venues, and experiences to life. From lighting and rigging to AV, scenic, and systems integration, we specialize exclusively in entertainment technology.

We work with manufacturers, integrators, and production companies nationwide — delivering permanent placements with no upfront cost and a 90-day guarantee.

We deliver the Talent.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. 

As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.  

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities: 

• Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. 

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. 

• Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. 

• Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. 

• Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. 

• Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. 

• Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. 

• Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. 

• Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. 

• Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.

• Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. 

• Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. 

• Use precision measuring instruments to verify that quality standards are achieved. 

• Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. 

• Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. 

Physical Demands and Potential Hazards: 

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. 

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee 

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. 

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process.  Failure to complete the assessment will remove you from consideration. 

Basic Qualifications (Required Skills/Experience):  

• 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.

• 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting. 

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.

• Ability to lift up to 35lbs.

• Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications:  

• 1+ years of experience performing aircraft structural work or equivalate.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:  

High school graduate or GED preferred. 

Relocation: 

This position offers relocation based on candidate eligibility. 

Drug Free Workplace: 

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. 

Union Representation Statement:  

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. 

Shift:  

This position is for a variety of shifts.  

Total Rewards & Pay Transparency: 

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.    

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.    

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay is based upon candidate experience and qualifications, as well as market and business considerations.    

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 10, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. 

As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities : 

• Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. 

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. 

• Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. 

• Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. 

• Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. 

• Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. 

• Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. 

• Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. 

• Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. 

• Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.

• Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. 

• Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. 

• Use precision measuring instruments to verify that quality standards are achieved. 

• Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. 

• Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. 

Physical Demands and Potential Hazards:  

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.  

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required . “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee  

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.  

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. 

Basic Qualifications (Required Skills/Experience):  

• 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.

• 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting. 

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.

• Ability to lift up to 35lbs.

• Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications :   

• 1+ years of experience performing aircraft structural work or equivalate.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:   

High school graduate or GED preferred.  

Relocation:  

This position offers relocation based on candidate eligibility.  

Drug Free Workplace :  

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.  

Union Representation Statement:   

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.  

Shift :  

This position is for a variety of shifts.  

Total Rewards & Pay Transparency:  

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent . Elements of the Total Rewards package include competitive base pay and variable compensation opportunities .   

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work .   

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay is based upon candidate experience and qualifications, as well as market and business considerations .   

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 10, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. 

As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities : 

• Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. 

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. 

• Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. 

• Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. 

• Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. 

• Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. 

• Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. 

• Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. 

• Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. 

• Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.

• Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. 

• Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. 

• Use precision measuring instruments to verify that quality standards are achieved. 

• Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. 

• Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. 

Physical Demands and Potential Hazards:  

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.  

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required . “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee  

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.  

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. 

Basic Qualifications (Required Skills/Experience):  

• 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.

• 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting. 

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.

• Ability to lift up to 35lbs.

• Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications :   

• 1+ years of experience performing aircraft structural work or equivalate.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:   

High school graduate or GED preferred.  

Relocation:  

This position offers relocation based on candidate eligibility.  

Drug Free Workplace :  

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.  

Union Representation Statement:   

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.  

Shift :  

This position is for a variety of shifts.  

Total Rewards & Pay Transparency:  

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent . Elements of the Total Rewards package include competitive base pay and variable compensation opportunities .   

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work .   

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay is based upon candidate experience and qualifications, as well as market and business considerations .   

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 10, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

About the Organization
RoadSafe Traffic Systems is the largest national provider of traffic safety products and services in the United States. RoadSafe serves customers in all 48 contiguous states through its network of more than 60+ branch locations. At RoadSafe, we offer competitive pay, growth potential, and an excellent benefits package, including medical, dental, vision, and 401(k) plans for those who qualify. We recognize and value diversity and are committed to creating an inclusive environment for all employees.

Position Summary:
The DOT Sign Installer is responsible for installing signs on state highways and other roadways, working either independently or as part of a sign installation control crew. This role includes setting up and maintaining safe work zones as required to ensure the safety of both the crew and the public.

Essential Functions:

• Install, remove, and maintain DOT roadway signs, posts, and related hardware.
• Ensure all installations meet DOT, MUTCD, and company safety standards.
• Assemble and install sign posts using a jackhammer and other necessary tools.
• Read and interpret blueprints, work orders, site plans, and installation specifications to ensure accurate installation.
• Operate hand and power tools, jack hammers, drills, and basic construction equipment.
• Drive the sign installation vehicle with a trailer to and from project sites and operate safely on work sites.
• Load, transport, and unload signs, posts, and materials to and from job sites
• Perform routine inspections and repairs of existing signage.
• Follow all safety protocols, including PPE and traffic control procedures.
• Maintain a clean and safe job site at all times.
• Communicate effectively with supervisors and crew members.

Education, Experience, and Skills Required:

• Previous experience installing DOT or roadway signage in sign installation or a similar trade is required; certification from ATSSA as a Worksite Traffic Technician or Supervisor is preferred.
• Must possess a valid driver's license and meet federal DOT requirements; a CDL Class B is preferred.
• Working knowledge of DOT and MUTCD standards.
• Experience using construction tools and equipment.
• Ability to work outdoors in varying weather conditions.
• Ability to understand and follow directions as provided by supervisors and project leads.
• Capability to lift and carry a minimum of 50 pounds to handle materials and equipment.

EOE Statement
RoadSafe is an Equal Opportunity Employer/including Disabled/Veterans

Must haves:

• Electrical apprenticeship or formal training in electrical installation techniques.
• Demonstrated ability to read and interpret drawings.
• Possesses working knowledge of local codes as it applies to controls.
• Experienced in scope determination of installation materials. Able to work independently.
• Four years’ experience directly with controls installations.

Day to day:

Under general supervision, performs installation and checkout on a variety of systems utilizing codes, company procedures, engineering drawings and personal analysis. Works with electrical contractors as required. Develops a positive interface with the customer to ensure confidence and satisfaction with the system installation.

• Installs raceways, cables and wiring to meet local or national codes, standards and customer system requirements. Lays out electrical controls installation to provide lowest total installed cost.
• Mounts and terminates controls equipment as needed.
• May assist sales with electrical estimates, including walking retrofit projects.
• Determines and validates final termination points to equipment interfaced with the installed system (i.e. chillers, boilers, roof top units, etc.).
• Checks out wiring and terminations of field-installed equipment with test instruments as needed (i.e. volt meters, hand held testers, etc.).
• Keeps management informed of job needs, progress and issues.
• Completes paperwork, including but not limited to time sheets, expense reports, and on-site documentation. Provides feedback to Engineering on changes and keeps as-built drawings current.
• Resolve job site conflicts regarding installation issues or escalates concerns to management as required.
• Communicates with the customer as necessary upon arrival and before leaving the work site.
• Adheres to safety programs and policies.
• Performs other related duties as assigned.

This position requires the ability to travel out of town as needed for various job sites.

1. Must be fully qualified and capable of working directly with project management to understand and evaluate scheduled electrical work needed to complete projects in a timely manner.
2. Must be capable of performing all duties associated with the crew lead position and in addition. 
3. Must be able to self-prepare for all scopes of electrical work needed by evaluating pictures from site assessment and communicating directly with the project management and design team about any necessary changes or improvements to the electrical plan set. These changes must be documented and sent to the project management team. 
4. Must maintain tools and materials needed to “adapt and overcome” any challenges in the field including utility shutdowns. 
5. Must be capable of communicating at a high level with city inspectors. 
6. Must maintain a 90% or higher pass rate on all electrical equipment wall installations and maintain less than 10% of service calls generated by installation-related quality issues. 
7. Must be capable of cross-training and crew development when assigned to supervise and support solar installation crews, allowing roof crew leads to self-perform installations while maintaining consistent quality by performing and documenting (pictures) quality control checks at specific points during the installation process. 
8. Must be capable of supervising the crew while the electrical apprentice ( roof lead or other designated person by management) gets to experience electrical wall installation and service upgrades. 
9. Must have required personal tools of the trade, see “minimum required personal tools of the trade”.
10. During the first 90 days you will be required to learn how to install Tesla Powerwall coupled with Enphase solar systems. 
11. We will be looking to you to run your own crew with a helper installing power walls and solar systems. By the end of the 90 days, you will be required to take a proficiency test. This test will include you installing a complete battery and solar system without the help of the lead electrician at Good Faith Energy. 
12. You must pass this test to be a lead electrician for Good Faith Energy.
13. We will provide you with all the on-the-job training as well as classroom materials to advance your knowledge of the systems you will be installing.
14. Attends all meetings and conference calls.
15. Performs consistently with company core values
16. Maintains strict confidentiality.
17. Provides excellent customer service, for both internal and external customers.
18. Follows all OSHA and other safety guidelines. 
19. Actively demonstrates teamwork at all times.
20. Adheres to company safety standards at all times, such that no serious (requiring medical attention) injury occurred during the prior 12-month period.
21. Follows other policies and procedures such that there are no verbal or written warnings during the evaluation period.