Basic Trigonometry Formulas With Examples Jobs in Usa

Oversees and coordinates the total construction effort in a wide range of building projects by personal performance or through supervision of superintendents and subordinate personnel.

Essential Duties and Responsibilities

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily, with or without special accommodations.

• Studies plans and specifications for construction on the basis of start and completion times, staffing requirements and timely procurement of tools, materials and equipment to conform to work schedules for each phase of construction.

• Attends or conducts all preconstruction, job site and update meetings and inspects work in progress to ensure that workmanship conforms to the plans and specifications and quality and is meeting construction schedules.

• Directs the set up of the site job office and equipment trailers; with proper permits, labor notices, EEOC and safety rules and regulations being posted in a conspicuous place.

• Directs supervisory personnel and subcontractors engaged in planning and executing work procedures, interpreting plans and specifications, and coordinating various phases of construction to maintain the current budget and schedule, while insuring all safety and quality standards are met.

• Confers with supervisory personnel and contractors to resolve complaints and grievances within work force.

• Confers with company management, designers, subcontractors and inspectors and suppliers of tools, equipment and materials to resolve construction problems and improve construction methods.

• Prepares, keeps current or reviews reports on progress and materials used, and performs two week ‘look a heads’ to ensure proper planning and adjustment and execution of work schedules.

• Ensures that all change orders are properly executed and indicated on ‘as-built’ plans.

• Conducts ‘Punch Out’ process throughout and at conclusion of project.

• Mentors, trains and develops support personnel.

• Ensure all required regulatory inspections are obtained and passed in a timely manner.

• Ensures general conditions budget is met.

• Directs and ensures that all OSHA regulations and safety policies and procedures are followed and necessary safety equipment is on site; safety meetings are adequately attended by company personnel and subcontractor crews; daily site safety walks are conducted and corrective action is taken; and that good housekeeping practices are observed and maintained by company personnel and subcontractors.

• Maintains good relationships with project managers, owners, engineers, inspectors, architects, subcontractors and other key stakeholders.

• Other duties may be assigned.

Supervisory Responsibilities

Manages 1–10 subordinate supervisors and subcontractors who supervise a total of up to 100 employees on the jobsite. Is responsible for their overall direction, coordination, and evaluation of all processes. Carries out supervisory responsibilities in accordance with the organization’s policies and applicable laws. Responsibilities include training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems.

Qualifications

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Education and/or Experience: Four year degree (B.S.) or equivalent plus 5-10 years of job related experience or equivalent combination of education and experience.

Language Skills: Ability to read and interpret documents such as complex plans and specifications, safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.

Mathematical Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

Computer Skills: To perform this job successfully, an individual should have knowledge of Project Management software and Spreadsheet software.

Our customers are at the heart of everything we do. As a privately owned and managed company, we are committed to delivering an exceptional experience through our comprehensive services. We specialize in full-service engineering, design, precision machining, and equipment manufacturing. Ensuring the highest standard of quality and craftsmanship or our valued clients.

What we're looking for:

• Comfortability working with high mix, low volume parts. Ranging in various sizes, materials, and complexity.
• Extensive hands-on experience in the setup and operation of CNC machines.
• Familiarity with selecting, maintaining, and using various cutting tools and fixtures.
• Strong troubleshooting abilities to identify and resolve machining issues quickly. For example:
• Skilled in identifying mechanical and software issues within CNC machines. This includes understanding error codes, alarm messages, and other indicators that suggest a malfunction.
• Recognizing signs of tool wear, such as changes in surface finish or dimensions, and knowing how to adjust feed rates, speeds, and tool selections accordingly. Also adept at diagnosing and addressing tool breakage to minimize downtime.
• Experience in implementing process improvements and efficiencies.
• Ability to program CNC machines from scratch, when needed.
• Skilled in selecting optimal tool path strategies, including appropriate feeds, speeds, and depths of cuts.
• Ability to calculate RPM based on SFM.
• Versatility in operating both CNC vertical machining centers and turning centers is highly preferred.
• High attention to detail, capable of maintaining tight tolerances.
• Advanced knowledge of shop mathematics, including trigonometry.
• Strong ability to interpret and understand complex technical drawings and blueprints.
• Consistently efficient in running both new and repetitive jobs.

The candidate should be able to demonstrate a deep understanding of machining processes and the ability to produce high-quality components efficiently.

Why you'll love joining the Butler Tool Team:

• Competitive wages with overtime opportunities
• Comfortable air-conditioned shop
• 100% company paid premiums for Health, Dental, Life Insurance, and Short-Term Disability Insurance
• Up to 100% tuition reimbursement for continued education in various fields
• PTO with 8 paid holidays per year
• 401(k) plan with company matching contributions
• Annual bonus opportunities
• Referral bonuses

We're moving! Butler Tool is currently building a brand-new facility in Sussex, WI. This facility will be over twice as big as our current location! Please consider this possible commute change to be in affect within the coming year.

*** Sign on Bonus ***

About Means Engineering, Inc.

Means Engineering, Inc., headquartered in Carlsbad, CA, delivers innovative solutions across the medical, industrial, semiconductor, and military sectors.  We combine deep expertise in product development with a relentless commitment to design, function, and quality.

Our team is guided by our core values — Passion, Integrity, Innovation, Quality, and Ethics — ensuring every project meets the highest standards. Join us and be part of a company that values craftsmanship, collaboration, and excellence.

Key Responsibilities:

• Perform advanced-level setup and operation of milling, turning, and grinding machines.
• Troubleshoot and resolve machining issues quickly and effectively.
• Read and interpret blueprints, technical drawings, and job specifications.
• Execute high-precision benchwork and layout activities.
• Edit CNC setup sheets; suggest and implement programming or process improvements.
• Inspect parts to ensure conformance to quality standards and specifications.
• Accurately document work in the ERP system, including job status, time tracking, and nonconformance reports.
• Collaborate with Process Engineering on new product introduction (NPI) and continuous improvement projects.
• Maintain a clean, organized, and safe work environment; follow all company policies and safety

Qualifications:

• Minimum of 7 years of related machining experience.
• Strong English communication skills – able to understand verbal and written instructions, collaborate with team members, and actively participate in meetings and training.
• Math proficiency in algebra, geometry, and trigonometry.
• Exceptional measurement skills with the ability to work within tight tolerances.
• Expertise in reading and interpreting technical drawings, specifications, and quality standards.
• Ability to document quality control requirements clearly and accurately.
• Solid understanding of tooling, equipment safety, and machining best practices.
• A proactive mindset for addressing non-conforming operations and producing accurate, high-quality parts within deadlines.
• Ability to work both independently and collaboratively, with experience mentoring junior team members

Time Type: Full Time

Starting Pay: $50,000 / YR

Job Location: San Marcos, TX

McCoy’s Building Supply is looking for a Risk Safety Coordinator. A Risk Safety Coordinator is consultant multiple assigned company facilities and plans, directs, and implements organization safety program to ensure a safe and accident-free work environment.

The final candidate can office in our Headquarters location in San Marcos when not traveling or may choose to live in a central area in the markets they support. Relocation assistance will be provided to the final candidate who wishes to move to either area.

This is an in-person Risk position and is not eligible for 100% remote work in order to best support our employees working in our retail and manufacturing facilities.

SUMMARY

Plans, directs, and implements organization safety program to ensure safe and accident-free work environment by performing the following duties:

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

• Plans and implements safety policies and procedures in compliance with McCoy’s internal policies, local, state, and federal laws, including Occupational Safety and Health Administration (OSHA), Federal Motor Carrier Safety Act (FMCSA), Department of Transportation (DOT), etc.
• Plans and implements programs to train managers and employees in work site safety practices and fire prevention
• Works with and through store management, executive management and various insurance carriers and other third-party consultants within the risk management industry
• Prepares, studies and analyzes accident causes and hazards. Prepares written reports of findings and recommendations regarding unsafe and potentially dangerous conditions
• Inspects facilities to detect existing or potential accident and health hazards, determines corrective or preventive measures and follows up to ensure measures have been implemented
• Evaluates employee safety behaviors and work practices, works with store management to ensure preventive practices are followed
• Inspects properties such as buildings, yard area and vehicles to evaluate physical conditions, safety practices and hazardous situations
• Provides information such as signs, posters, barriers, and other materials to warn of potential and actual safety hazards and to prevent access to hazardous conditions
• Responds to, investigates and follows post-inspection procedures and post-accident response procedures for company related incidents
• Compiles, drafts and submits accident reports required by regulatory agencies
• Prepares and arranges safety exhibits and material for display, promotional work, industry conferences, and exhibitions
• Represents the organization in community or industry safety groups and programs. May conduct informal meetings among various educational and civic groups to promote general safety concepts
• Maintains safety files and records
• Follows standard operating procedures while carrying out the responsibilities of position
• Attends all team meetings and company training sessions as required

SUPERVISORY RESPONSIBILITIES

This job has no supervisory responsibilities

QUALIFICATIONS  

• Bachelor's degree from four-year college or university; or one to two years related experience and/or training; or equivalent combination of education and experience.
• Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
• Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
• Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
• Ability to utilize Microsoft Word, Excel & Outlook, and other 3rd party software applications as assigned

WORK AVAILABILITY

• Must maintain regular and acceptable attendance, at such level as is determined by management
• Must be regularly available and willing to work at least 8 hours per day, 40 hours per week or such other hours per day or hours per week as the employer determines are necessary or desirable to meet business needs
• Must be available and willing to work such weekends and holidays as the employer determines are necessary or desirable to meet its business needs

TRAVEL REQUIREMENTS

• This position requires frequent travel with overnight stays
• Must meet driver’s license requirements as required by the company
• Must be able to legally obtain a rental vehicle in all states in which the company does business
• Must have current auto liability insurance

PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• While performing the duties of this job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; and talk or hear. The employee is occasionally required to reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus.

WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; and vibration. The noise level in the work environment is occasionally loud.

McCoy’s is an equal opportunity employer. Equal access to programs, services and employment is available to all persons. Those applicants requiring reasonable accommodations in the application and/or interview process should contact a representative of the People Development Department at (866) 896-0884. EOE, AAP, D, F, VA

CNC Programmer / Machine Tool Engineer / CNC Machinist required to join a leading provider of advanced machining solutions.

The CNC Programmer / Machine Tool Engineer / CNC Machinist will have strong experience working on a range of CNC machines including lathes, grinders, and mills. The ideal candidate will be proficient in

Mastercam and SolidWorks, with the ability to write and modify programs to automate machining processes. The role will focus on optimizing the efficiency of CNC operations and troubleshooting any technical issues that arise during production.

The CNC Programmer / Machine Tool Engineer / CNC Machinist will be based in our Canastota, NY facility, supporting manufacturing operations and working with various production teams to ensure the successful completion of machining tasks.

Package

• $43.00 – $48.00 per hour, DOE
• 100% company-paid health insurance
• Paid time off
• Competitive holiday package

CNC Programmer / Machine Tool Engineer / CNC Machinist Role

• Based in Canastota, NY, with occasional travel to client locations if required.
• Write and modify CNC programs for 3, 4, and 5-axis mills and lathes.
• Review CAD blueprints and translate designs into CNC programs.
• Assist machinists during CNC machine set-up and resolve technical issues.
• Select the appropriate cutting tools and define the sequence of operations for each job.
• Troubleshoot and resolve mechanical and electrical issues with CNC machines.
• Work with engineering and internal teams to develop accurate product quotes and technical solutions.
• Train junior technicians and machinists on CNC operations.
• Maintain safety compliance and ensure all tasks are carried out in line with company regulations.

CNC Programmer / Machine Tool Engineer / CNC Machinist Requirements

• At least 4 years’ experience in CNC programming with 3, 4, and 5-axis mills and lathes.
• Proficiency in Mastercam and SolidWorks.
• Strong understanding of mechanical systems and experience with CNC machines.
• Strong math skills, particularly in algebra, trigonometry, and physics.
• Excellent problem-solving abilities and troubleshooting skills.
• Ability to work independently with little supervision and manage multiple tasks.
• Strong written and verbal communication skills.
• Knowledge of metal shop equipment and machining processes.
• Experience with CMMs and CNC Mills is a plus.
• High school diploma required, technical certifications or related education preferred.

Position: Material Manager

Location: Franklin, NH (On-Site)

Length: 6+ Month Contract

*Must work on-site in Franklin, NH*

Job Description:

Responsible for oversight of all aspects of inventory control, ensuring the company has a steady flow of materials to meet production needs. This involves coordinating with internal teams, oversight of all inventory control staff, managing vendor relationships, coordinating supply chain activities, and maintaining optimal inventory levels. The Materials Manager role requires strong organization and priority management skills, attention to detail, and the ability to negotiate effectively with suppliers.

Essential Duties and Responsibilities:

• Oversight of shipping, receiving, planning and inventory control staff.
• Develops, implements, and maintains policies, procedures, and material control systems to reduce costs, streamline procedures, and implement solutions.
• Plans and implements activities related to the timely, cost-effective procurement, inventory control, planning and quality control of production materials.
• Ensure quality and timely delivery in order to maintain balanced inventory levels on all purchased material and supplies to prevent out of stock conditions and cash flow problems relating to inventory, and support production schedules and customer requirements.
• Guarantee a continuous inventory supply, establish and maintain proper levels of inventory turns, and to control the level of backorders. Eliminate past due backlog and backorders for all products determined to be available in stock upon demand.
• Work closely with Marketing and Sales to properly forecast new product timelines and sales; forecast inventory levels on a rolling 90 day go forward so as to anticipate inventory levels and cash flow needs.
• Develop and provide leadership to the Planning personnel in effectively utilizing a Master Production Schedule, and Material Requirements Planning System
• Prepares and issues purchase orders and change notices; reviews purchase order claims and contracts for conformance to company policy.
• Assigns procurement requests to the appropriate personnel.
• Arranges for disposal of surplus materials.

Qualifications:

• Bachelor’s degree in business or engineering
• 5+ years related experience and/or training; or equivalent combination of education and experience.
• Lean and/or Six Sigma Green or Black Belt certified.
• Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.
• Ability to write reports, business correspondence, and procedure manuals, as well as effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
• Ability to apply mathematical concepts such as probability and statistical inference, fundamentals of plane and solid geometry and trigonometry, fractions, percentages, ratios, and proportions to practical situations.
• Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.
• Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
• Knowledge of ERP systems; Database software; Internet software; and Microsoft 365.

POST-OFFER BACKGROUND CHECK IS REQUIRED. Digital Prospectors is an Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other characteristic protected by law. Digital Prospectors affirms the right of all individuals to equal opportunity and prohibits any form of discrimination or harassment.

Come see why DPC has achieved:

• 4.9/5 Star Glassdoor rating and the only staffing company (< 1000 employees) to be voted in the national Top 10 ‘Employee’s Choice - Best Places to Work’ by Glassdoor.
• Voted ‘Best Staffing Firm to Temp/Contract For’ seven times by Staffing Industry Analysts as well as a ‘Best Company to Work For’ by Forbes, Fortune and Inc. magazine.

As you are applying, please join us in fostering diversity, equity, and inclusion by completing the Invitation to Self-Identify form today!

# 18402

FUNCTIONAL PURPOSE:

Independently performs the full range of diagnostic, preventive maintenance, alignment and calibration, and overhaul tasks, on both hardware and software on a variety of mail processing, customer service, and building equipment and systems, applying advanced technical knowledge to solve complex problems.

DUTIES AND RESPONSIBILITIES:

• Performs complex testing, diagnosis, maintenance, alignments and calibration, overhaul, and revision, of electronically operated or controlled equipment or systems; may be required to perform maintenance of associated electromechanical equipment and systems.
• Observes the operation of systems and equipment, and applies various testing and diagnostic methods and procedures to locate and correct malfunctions and/or failures and ensures maximum system performance.
• Performs equipment inspections to assess the quality of service or maintenance received, and to discover incipient malfunctions; initiates work orders requesting corrective actions for equipment not meeting maintenance or operating standards; estimates time and materials necessary to make corrections and conducts investigations of frequent or serious equipment failures to determine the cause of the breakdown and to recommend remedial maintenance action.
• Recommends changes to servicing and preventive maintenance activities; assists in the revision of preventive maintenance and operator checklists, and their frequency to sustain the proper degree of maintenance.
• Performs analyses of equipment failures; reviews operational reports, audits, and other information, to determine where operational enhancement can be made to prevent equipment or systems deterioration.
• Participates in the installation, removal, modification, assembly, and/or disassembly of systems and equipment.
• Participates in classroom, on-the-job, and correspondence training programs; attends courses at postal facilities, trade schools, and manufacturers sites; assists in developing and implementing training programs; provides on-the-job training to other lower level maintenance employees.
• Provides technical support to other employees in the facility or in installations within the area served; performs in-process and final operational checks and tests work completed by other employees; may work without direct supervision.
• May drive a vehicle or use other appropriate modes of transportation in the course of assigned duties.
• Follows established safety practices and requirements while performing all duties; reads and adheres to instructions listed in applicable maintenance directives; maintains a library of maintenance directives.
• Performs other duties as assigned.

REQUIREMENTS:

• Ability to demonstrate mechanical comprehension to learn and apply mechanical principles, including a working knowledge of basic mechanical operations (such as levers and pulleys) and the application of physical laws (such as force and gravity). This includes knowledge in the following areas: (A) Power transmission--such as gears, sprockets and chains, belts and pulleys; (B) Power translation--such as cams and cam followers, linkages, springs; (C) Friction reduction'such as bushings, bearings; (D) Fasteners--such as screws, nuts and bolts, pins, rings, clips, couplings.

• Knowledge of basic electricity principles; this includes knowledge of Ohm's law, Kirchoff's law, AC-DC circuitry, relays, switches, and circuit breakers.

• Knowledge of the National Electrical Code may be required for employees in a skilled position. This also includes knowledge of techniques and procedures as used in electrical installations and maintenance (circuit protection, wiring, conduits, etc.).

• Knowledge of electronic principles; this includes knowledge of (A) basic logic gates, symbology, resistors, memory, encoders, decoders, etc.; (B) Hardware/components - such as solid state devices (diodes, transistors, etc.), coils, capacitors, etc.; (C) Digital circuit components - as in registers, adders, counters, memories, flip-flops, encoders, decoders, etc.; and D) AC and DC circuitry - as in circuit analysis, schematic interpretation, etc.

• Knowledge of and ability to follow safety and security procedures for performing maintenance work This includes knowledge of industrial hazards (e.g., mechanical, chemical, electrical, electronic) and procedures and techniques established to avoid injuries to self and others such as lock out devices, protective clothing, and waste disposal techniques.

• Knowledge of current computer technology to understand how technology may be applied to solve a problem or improve system design; this includes knowledge of hardware, software and networking technology/systems and integrated computer systems. This includes knowledge related to: (A) the Operation of computer terminals or other peripherals to enter, operate, and exit programs; to use the systems programs and (B) Retrieving and interpreting reports for diagnostic and information purposes.

• Ability to perform mathematical calculations such as addition, subtraction, multiplication, and division correctly; to solve practical problems by selecting from a variety of mathematical techniques such as formulas and percentages.

• Ability to remember material learned earlier refers to the ability to recall specific information and/or theoretical knowledge and apply it to mechanical, electrical, or electronic maintenance work such as inspection, troubleshooting, equipment repair and modification, preventive maintenance, and installation of electrical equipment.

• Ability to troubleshoot problems to analyze the root cause of a specific error and decide what action to take to prevent recurrence; to back track from a specific problem to identify the source of the error.

• Ability to think logically and critically; to understand the relevance of information; to identify relationships between information and data.

• Ability to think of possible causes for problems and find solutions; to choose the best course of action; to make a decision without delay when the opportunity arises or when all desired information is not available.

• Ability to learn and comprehend new or unfamiliar material; to use multiple approaches to grasp or learn the implication of new information; to quickly incorporate information and ideas.

• Ability to comprehend spatial relations as required to perform maintenance work; to form three-dimensional mental pictures of objects; to know what an object would look like when viewed from a different angle; to determine if something will fit in a specified area. This may include the ability to use technical drawings (e.g. diagrams, blueprints and schematics).

• Ability to read and comprehend job related written materials; this also includes the ability to locate, read, and comprehend text material such as handbooks, manuals, bulletins, directives, checklists, and route sheets.

• Ability to communicate work related information in writing to maintenance, operations and other personnel to complete forms or provide routine and technical information (e.g., in work logs, e-mails, memos and technical reports/documents).

• Ability to follow oral and written directions, instructions, rules, policies and/or procedures correctly and in order.Ability to develop and maintain effective working relationships; to work with teams; to help others; to accept suggestions; to treat others with dignity and respect.

• Ability to demonstrate organizational commitment to the public service goals and mission of the Postal Service. Ability to be conscientious to carry out job tasks; to be responsible and dependable; to take care in performing routine and novel tasks; to track details; to check that all work is accurate and complete; to record information accurately.

• Ability to work from heights refers to the ability to perform safely and efficiently the duties of the position above floor level such as from ladders, catwalks, walkways, scaffolds, vert-a-lifts, and platforms.

• Knowledge and ability to use various hand or portable power tools in performing mechanical, electrical, electronic or other maintenance work; this may include the use of shop power equipment. This ability includes the safe and efficient use and maintenance of such tools as screwdrivers, wrenches, hammers, pliers, chisels, punches, taps, dies, rules, gauges, and alignment tools; refers to the knowledge of, and proficiency with, various power tools; the ability also involves the safe and efficient use and maintenance of power tools such as drills, saws, sanders, and grinders; refers to the knowledge of, and proficiency with, shop machines such as bench grinders, drill presses, and table/band saws.

• Knowledge and ability to use test equipment, gauges or tools to take measurements and/or to take measurements with electrical or electronic test equipment (such as VOMs, oscilloscopes, amprobes) to perform maintenance work; this includes various types of maintenance equipment and may monitoring the operation of a system or machine or use of data networking test equipment.

EXAMINATION REQUIREMENTS:

Applicants must successfully complete Postal Service Test 955, for the Electronics Technician job group, which measures maintenance knowledge, skills and abilities.

In addition, applicants must successfully complete a structured interview evaluation.

ADDITIONAL PROVISIONS:

1. Applicants must be able to operate powered industrial equipment.

2. For positions requiring driving, applicants must have a valid state driver's license, and demonstrate and maintain a safe driving record.

We are Toshiba. We have an unwavering drive to make and do things that lead to a better world.

At Toshiba, we commit to raising quality of life for people around the world, ensuring progress that is in harmony with our planet. Our core values include: Do the Right Thing, Look for a better way, Always consider the impact and Create Together.

Toshiba America Energy Systems Corporation (TAES) provides energy industry solutions – new equipment, retrofits, maintenance, outage planning and more – for current and future power generation needs in the Americas, including thermal, hydro and nuclear power plants.

Position Summary

We are seeking a 2nd Shift Turbine Mechanic (4 - 10's) to work out of our Milwaukee Service Center. This position is responsible for the disassembly, assembly, and mechanical operations on a variety of steam turbine spindles, casings, and valves where methods are standardized and prescribed. Work from assembly drawings and specifications to do skilled fitting, aligning, and adjusting along with some secondary machining. Use a wide variety of precision measuring instruments and gauging devices.

Essential Duties

• Receive and inspect incoming turbine components, take digital pictures of shipping container, cribbing, rigging techniques, and all parts.
• Measure and record the critical dimensions of the turbine components.
• Charting of the disassembly of the blades and proper labeling.
• Perform proper blade straightening and repairs procedures.
• Perform blade setlliting and stiffener repairs technique.
• Remove and install seals, disassemble, and assemble valves, and perform blade ring assembly procedures.
• Repair or rebuild hydrogen seal assemblies and rigging and shipping skid setup.
• Operate the manual grinding, milling, turning, and sawing machinery as required for installation and final fitting of turbine blade seals, and valves.
• Follow and comply with all safety and work rules and regulations.
• All employees are entrusted, empowered, and encouraged to be responsible for attaining the highest quality and maximum value in their work product while providing a positive customer experience.
• May be assigned other tasks where similar or lesser skills are required or where activities are monitored – usually short duration to meet production requirements.

Education and Required Experience

• 10+ years mechanical background with turbine experience a plus
• 5 years basic machining practices.
• Ability to properly operate overhead cranes and lift trucks.
• Solid math skills with the ability to add, subtract, multiply, and divide numbers including decimals and fractions. Simple use of formulas, blueprints, specifications, and tables.
• Capable of using various types of precision measuring instruments.
• Knowledge of design and basic mechanical principles.
• Ability to work from engineering drawings and process drawings
• Pendant crane certified 5 & 10 ton and greater with basic to advanced hitching knowledge.
• Honing and lapping, gland packing, use of radio-controlled bridge cranes, blading, babbiting, radial drill press, turbine alignment, tight wire, and oil seal repair.

Physical Requirements (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.)

The employee must be able to lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include Close vision, Distance vision and Ability to adjust focus. While performing the duties of this job, the employee is regularly required to stand; walk; and use hands to finger, handle, or feel. The employee frequently is required to talk or hear. The employee is occasionally required to sit; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and taste or smell.

Work Environment

While performing the duties of this job, the employee is regularly exposed to work near moving mechanical parts, fumes, or airborne particles, and toxic or caustic chemicals. The employee is occasionally exposed to work in high, precarious places, and risk of shock. The employee is occasionally exposed to extreme heat, extreme cold and wet, humid conditions. The noise level in the work environment is frequently loud.

Additional Info

Toshiba employees enjoy a comprehensive compensation and benefit package including an annual bonus, a generous 401k match, health, and wellness programs as well as generous time off.

Toshiba is an Equal Opportunity Employer.

Work directly with Client Service Team (Client Managers, Client Executives and Principals) to provide a high level of client support in response to routine client requests and needs, act as liaison with carriers, and maintain client and carrier information.

Essential Duties & Responsibilities

Support the Client Service Team with the renewal process.

• Initiate marketing and renewal process by gathering client census data, current / renewal plan design and rate information, historical claims experience data, and any additionally related materials required to prepare RFP for client renewals and prospective groups. For specifically assigned clients, prepare RFP.
• Select employee benefit markets for solicitation, analyze market proposals received to verify benefits, premium rates and competitiveness and provide input in identifying alternative plans to show with analyses.
• Collaborate with Client Service Team to negotiate with current and bidding carriers to ensure most competitive rates/products for clients.
• Finalize and maintain client and carrier spreadsheets in accordance with internal requirements and client requests.
• Produce cost contribution analysis to be included in presentation to clients.
• Initiate, prepare and coordinate materials for the enrollment process and other formal client presentations.
• Coordinate client open enrollment / health fair events.
• Work with carrier representatives to coordinate activity for a smooth implementation of new plans.
• Coordinate Administrative Installation with insurance carrier and participate in installation meetings.
• Maintain Agency Management System and the ImageRight System.
• Follow processes and procedures as outlined in the Procedure Manual.

Provide day to day client service

• Act as liaison for client to research and resolve coverage, claim and administrative problems.
• Respond to client and carrier questions in a timely manner, requesting assistance from others on the Client Service Team if needed.
• Ensure the client data is accurate and current upon each renewal and throughout the policy period.
• Prepare files and other records needed by MMA.

Develop good relationships with Clients and others on the Client Service Team.

• Maintain the professional standards established by MMA when working with clients.
• Provide back up to other Benefit Analysts as needed.
• Share information with Benefit Analysts and others to create a good network of information within the Department.
• Attend monthly Analyst meetings and other meetings as requested.
• Serve as a technical resource / mentor to less experienced associates.

Education and/or Experience

Successful candidate will be a service oriented individual with high personal standards and a hands-on work style. This position requires an individual who is comfortable working at a varying pace, managing multiple tasks and deadlines simultaneously, adjusting priorities often, and managing frequent interruptions.

This position interacts with and provides service to internal associates and has contact with external vendors. The Benefits Analyst must be positive and approachable, and work effectively with diverse personalities. In addition, the following is required unless otherwise noted:

• Must possess a basic understanding of health and welfare plan benefits and carriers acquired through 3 years of experience providing group health and benefits service preferably at a brokerage or carrier or performing in a benefit specialist role with a Human Resource department of a large corporation.
• Bachelor degree preferred
• Maintain a valid, unrestricted State of California Life & Disability License and meet the continuing education requirements.
• Maintain a valid Driver’s License and dependable transportation.
• Proficiency with Microsoft Word, Excel and PowerPoint to include professional work experience creating tables, charts, graphs, pivot tables and formulas.
• Math skills are required to perform basic arithmetic, calculate percentages and amounts based on a percentage increase/decrease
• Above average analyzing, problem solving and planning/organizational techniques are essential.

Work Environment & Physical Demands

• Ability to use computer keyboard and sit in a stationary position for extended periods as well as the use of office equipment such as fax and copy machines, and telephones.
• Work is performed in a typical interior/office work environment.
• Occasional travel to client sites may be required. Travel is usually within driving distance.

The applicable base salary range for this role is $49,000 to $91,300.

The base pay offered will be determined on factors such as experience, skills, training, location, certifications, education, and any applicable minimum wage requirements. Decisions will be determined on a case-by-case basis. In addition to the base salary, this position may be eligible for performance-based incentives.

We are excited to offer a competitive total rewards package which includes health and welfare benefits, tuition assistance, 401K savings and other retirement programs as well as employee assistance programs.

#MMAwest

#MMAEHB

#LI-DNI

The pay range for this position is $31.55-34.00 an hour. Exact compensation may vary based on several factors, including skills, experience, and education.

Responsibilities

We are looking for a Maintenance Technician II to join our team! In this role, you will perform preventive and reactive maintenance duties required for the manufacturing operations of the plant. Your priorities will include executing PM schedules, repairing equipment to maintain maximum production rates, and maintaining an adequate spare parts inventory. If you are passionate about maintenance and sustainability, we would love to hear from you!

Key Responsibilities

• Troubleshoot and perform repairs on machines and their controls (extruders, corrugators, extrusion die, DC/AC motor & drives, downstream equipment, chillers, etc).
• Maintain and build job skills through company training programs.
• Contact, specify, and order replacement parts & control components from suppliers as needed.
• Effectively contribute to CMMS performance through timely PM & Repair Work Order completion while ensuring compliance.
• First responder to troubleshooting machine problems; contact Electrical Engineering if additional support is needed.
• Support Daily Management directives and initiatives.
• Help develop and implement Continuous Improvement projects to improve production efficiencies and safety.
• Work with Production Staff to ensure the safe and reliable operation of plant equipment.

Qualifications

• High School / Vocational School Diploma or Equivalent.
• Ability to lift 50 pounds to a height of 6 feet.
• Ability to stand and be mobile for a minimum of 8 continuous hours.
• Ability to perform physical labor for extended periods of time in temperature extremes.
• Ability to handle materials daily using hands, arms, and legs.
• Full range of body motion including twisting, bending, reaching, squatting, and mounting/dismounting industrial equipment and vehicles.
• Technician level - Electrical, hydraulics, pneumatic preferred.
• Basic PLC and Drive training preferred.
• +2 years Industrial Maintenance, Electrical Systems and Controls preferred.
• Plastic process knowledge preferred.

Skills & Competencies

• Experience using Electrical Test equipment: Voltmeter, Ammeter, ohm meter, Megger, etc.
• Understanding basic machine function and Sequence of Operations of production machinery.
• Experienced in reading Electrical, pneumatics and mechanical drawings.
• Knowledge of NEC, UL508A and NFPA 79 codes.
• Lock Out Tag Out Safety procedures.
• Arc Flash and PPE Requirements.
• Strong industrial mechanical, electrical, plumbing and pneumatic skills including troubleshooting.
• Strong leadership ability with time management and task prioritization skills.
• Strong in electrical formulas and mechanical math.
• Knowledge of 3 Phase Industrial wiring and power distribution.
• AC & DC Drive / Motor PMs, wiring, programming & troubleshooting.
• Troubleshoot PLC I/O and networking.
• Motion Training with Servo Drives and Motors.
• Strong interpersonal skills and the ability to work with and communicate to other plant personnel as well as company resources and vendors.
• Proficient in Microsoft Office, Excel, and Word.

Experience in Root Cause Analysis & Problem Solving.