Basic Excel Proficiency Test Jobs in Usa
26,175 positions found — Page 4
- Day Shift General Summary The Run Test Technician 3 is responsible for performing final functional testing, verification, and troubleshooting of industrial gas compressors/processing skids and PLC control panels prior to shipment.
This role ensures equipment meets safety, performance, and customer specifications by conducting run tests, analyzing data, and working closely with engineering, production, and quality teams.
Principle Duties & Responsibilities : Conduct Functional Run tests on natural gas compressor packages and PLC-based control panels in accordance with company procedures and customer specifications.
Verify proper operation of engines, compressors, control systems, and instrumentation.
Set up test environments, including fuel, electrical, and control connections.
Operate and monitor compressors during start-up, load, and shutdown cycles.
Test and validate PLC control logic, safety interlocks, alarms, and shutdown sequences.
Record and analyze test data to ensure compliance with performance and safety standards.
Identify, troubleshoot, and resolve mechanical, electrical, and control system issues.
Collaborate with engineering teams to provide feedback on design improvements and test outcomes.
Maintain calibration, cleanliness, and readiness of test equipment and facilities.
Adhere to all safety standards, environmental regulations, and company quality policies.
Accountability Responsibilities : Ensure all testing procedures are conducted in compliance with company and industry safety standards Demonstrate leadership in implementing and maintaining the 5S program Complete and properly sign off the GPS Traveler for each module or project Maintain detailed test records, issue reports, and document any non-conformances or deviations Recommend improvements to testing procedures to reduce downtime and enhance product reliability Influence Responsibilities : Act as a technical resource and role model for peers and junior technicians Promote a culture of safety, quality, and continuous improvement across teams Influence cross-functional collaboration by sharing insights and driving alignment on testing standards and expectations Encourage proactive problem-solving and accountability throughout the testing and assembly process Coordinate with the Manufacturing Supervisor(s) on potential quality issues or delays to projects Provide Technical feedback to assembly and engineering on design issues or deficiencies.
Provide feedback to other Supervisors, Manufacturing Engineers, and other team members regarding potential process improvements.
Required Support : Assist Supervisors training new employees.
Ensure all testing procedures are conducted in full compliance with OSHA, company, and industry safety standards.
Provide directions to resolve project issues based on Engineering recommendations Approve initiation of unit testing as needed.
Collaborate with Engineering, Production, and Quality Control to resolve testing issues efficiently.
Qualifications: Minimum of 3-5 years of experience troubleshooting PLC control panels and/or operating Caterpillar and Waukesha engines.
Proficiency in interpreting engineering documentation, including P&lDs, General Arrangement drawings, and Electrical schematics.
Hands-on experience with Caterpillar and Waukesha engines.
Familiarity with Ariel and Dresser Rand compressors.
Strong analytical and problem-solving abilities.
Excellent verbal and written communication skills.
Demonstrate dependability, motivation, and self-direction.
High attention to detail and strong organizational skills Ability to work effectively with minimal daily supervision.
Capable of providing guidance and leadership to junior personnel as needed.
Working Conditions: Fast-paced general office environment.
Many tasks have high degrees of time sensitivity.
Domestic and international travel is possible on occasion.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema at (63 or) Vignesh Chinnaiyan at (224) 507-1296 Title: Test Method Validation Engineer Duration: 6 Months with potential to extend and convertion to FTE Location: San Diego, CA Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Shift Time
- 8 AM to 5 PM Overtime Hours: Possible Description: Meet the team: Join a dynamic and collaborative multi-disciplined engineering team at client.
We support the organization by standing up pilot manufacturing lines for new product development.
These manufacturing lines are intended to prototype, evaluate and validate product designs.
This role is crucial to develop the software systems which capture, store and view the data which is produced from the manufacturing line.
Where you come in: Develop test methods through Measurement System Analysis (MSA) and/or Gage Repeatability and Reproducibility (GRandR) methodology to assess and improve measurement reliability Lead Test Method Validation (TMV) activities including protocol development, execution, and reporting.
Create and release test fixtures or equipment including CAD, drawings, prototyping, fabrication and implementation into a manufacturing environment Plan and perform Design of Experiment (DOE) to characterize and determine optimal processing and/or test methods Design, document and optimize new manufacturing process/assembly steps and operating procedures for new stations, equipment, and processes within a regulated quality system.
Analyze data using statistical tools (JMP or Minitab) to evaluate method/process performance and identify areas for improvement.
Collaborate cross-functionally with RandD, Quality, and Manufacturing teams to ensure test methods meet product and business requirements.
Author and maintain validation documentation including protocols, reports, and risk assessments.
Looking for Mechanical system testing, leak, pressure testing, water-immersive system testing, and eventually Electromechanical testing is a must-have need.
Open to non-medical candidates; need to be a strong fit.
What makes you successful: Strong problem solving skills when validating both destructive and non-destructive test methods.
Highly familiar with vision-based metrology equipment Have a preventative mindset through anticipating potential problems.
Excellent written and oral communication skills.
Flexibility to occasionally work 2nd shift based on equipment availability.
Proficiency in statistical analysis software (e.g.
JMP, Minitab) Experience with project management tools such as JIRA, Confluence, Smartsheet Experience with MSA (Measurement System Analysis) or GR-R methodology will be required.
Experience with CAD is a must-have.
SolidWorks will be preferred.
Required Skills (top 3 non-negotiables): End-to-end Test Method Validation (TMV) or Gauge RandR Vision-based equipment for Dimensional Inspection Medical Device Industry Exp Preferred Skills (nice to have) Mechanical Tensile or Compression Testing (Instron) Statistical Data Experience JMP or Minitab Process Development (DOE) Overall Experience: Ideal will be 6-9 years; 4-5 years will be considered.
Software Skills Required: JMP or Minitab is preferred, but not required Education Requirements: BS in Mechanical Engineering or Bioengineering Number of Interviews: 2 rounds About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
Medical Device, Test Method Validation, Gauge Randamp;R
Responsibilities:
- Develop and execute detailed test plans and test procedures for software and hardware products.
- Perform low-level testing and validation of software implementations and physical communication products.
- Create formal test procedures and informal work instructions.
- Develop and maintain system diagrams to support testing and system understanding.
- Conduct data reduction, analysis, and reporting to validate system performance against requirements.
- Perform serial and network communication testing and analysis.
- Set up and maintain test environments including local area networks for system validation.
- Analyze system requirements and decompose them into detailed test cases.
- Utilize testing and diagnostic tools such as Wireshark, Test Complete, and IBM DOORS when applicable.
- Work with cross-functional engineering teams to troubleshoot and resolve issues identified during testing.
- Document test results and communicate findings clearly to engineering and program leadership.
- Manage multiple tasks and testing efforts simultaneously while maintaining high quality standards.
Required Skills:
- 5+ years of Test Engineering experience
- Strong proficiency with Microsoft Office 365 and Microsoft Visio
- Experience writing formal test procedures and technical documentation
- Experience creating system and architecture diagrams
- Strong data analysis and data reduction skills
- Experience with serial communication and network communication testing
- Proficiency in Linux and Windows operating systems
- Linux command line experience (running scripts, modifying IP configurations, etc.)
- Familiarity with Bash scripting (preferred)
- Experience working with Ubuntu and embedded Linux environments (preferred)
- Networking knowledge with the ability to configure and support test LAN environments
- Familiarity with testing tools such as Wireshark, TestComplete, or IBM DOORS
- Experience analyzing and decomposing technical requirements into testable components
- Strong written documentation and communication skills
- Ability to work independently and within a collaborative engineering team
Desired Skills:
- Stronger networking experience and deeper understanding of networking fundamentals
- Experience working with radar protocols or FAA aviation systems
- Familiarity with synchronous and asynchronous serial protocols
- Experience testing embedded systems or communication hardware platforms
- Ability to quickly learn and adapt to new testing tools and environments
Education & Experience:
Bachelor’s Degree in Computer Science, Computer Engineering, or related technical discipline, or equivalent practical experience.
We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.
As a Senior Flight Test Engineer at Reliable Robotics, you will be a part of the Flight Test and Integration team. The Flight Test and Integration team is responsible for multiple installation and test efforts at Reliable Robotics. The team regularly ensures the proper function of mechanical, electrical, and flight control systems onboard the aircraft. In addition, this team has ownership over all ground and flight test operations within the organization. The team is composed of individuals with experience developing experimental and certification products.
Responsibilities
In your role as Senior Flight Test Engineer, you will verify the function and capabilities of modified flight control systems, for a remotely operated autoflight system. You will ensure the proper build-up of functions and capabilities, beginning in the lab and ending up on the vehicle. You will be expected to verify the end-to-end functionality of the system and ensure the ability to assess all desired test requirements. This will require engaging with many teams throughout the organization and having a firm understanding of the vehicle's capabilities. As part of the flight test campaigns, you'll act as the responsible engineer for the vehicle and often as test director.
Basic Success Criteria
Bachelor's Degree of Science or Engineering in Mechanical, Electrical, Aerospace, or related discipline
7+ years of experimental flight test experience
Prior experience drafting test plans, test cards, test hazard analyses, and acting as test director during a flight/mission
Experience with making aeronautical VHF radio calls
Demonstrated ability to complete system-level risk assessments
Preferred Criteria
Graduate of an SETP recognized flight test school
Bachelor's degree or higher in an engineering or science discipline or equivalent industry experience
Recent Caravan or PT6A experience
Diversity of experience in multiple aircraft/ airframes
CFII or military flight instructor
Experience with automated and/or large remotely operated vehicles (UAS, spacecraft, etc)
Experience working in a Flight Test program focused on Certification
Experience in developing flight procedures, training curricula, and safety management systems
Experience flying for a 14 CFR part 135 or 121 Air Carrier
Deep understanding of FAA certification processes and their implementation
In depth knowledge of systems engineering processes and principles
Basic familiarity with software programming principles
Must be willing to travel up to 10% of the time.
This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.
All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.
At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.
If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to
Compensation Range: $190K - $260K
Apply for this JobWe're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.
As a Sr. Electrical Test Engineer at Reliable Robotics, you will be a part of the avionics engineering team. We develop the wide variety of computing, sensing and actuation, power, and communications systems that are at the core of our automation system. We're looking for a broadly experienced individual to apply their electrical engineering and software automation skills to develop robust test solutions for complex hardware in a safety-critical environment. This is a clean-slate opportunity to grow our primitive test operations into a production worthy operation.
Responsibilities
Lead the development of automated test equipment systems for functional, environmental qualification, and manufacturing acceptance tests
Analyze test results to identify failure modes, lead root cause investigations, and drive improvements back into designs
Author, execute, and audit test plans, procedures, and reports
Collaborate with cross-functional teams to facilitate successful testing campaigns
Drive continuous improvement to test system infrastructure, processes, and practices
Basic Success Criteria
Bachelor's degree in electrical engineering, computer engineering, or equivalent experience
8+ years of full cycle electronics hardware test or development experience in a professional environment
Strong knowledge of electrical engineering fundamentals
Extensive experience with test equipment, measurement techniques, and processes for hardware verification
Experience with programming/scripting languages (C, C++, Python) and ability to develop and maintain test software
Preferred Criteria
Advanced degree in electrical engineering or computer engineering
Familiarity with formal industry test standards such as RTCA DO-160, MIL-STD-461/810, or similar
Experience developing and simulating complex and manufacturable printed circuit board assemblies using tools such as Altium Designer and SPICE
Excellent written and verbal communication skills
Ability to work both independently and as a leader of a high performing team
This role provides an opportunity to own a wide variety of testing that is essential in verifying the safe and reliable operation of the next generation of avionics for unmanned aircraft systems. This role also has the potential to lead into a leadership role in a player/coach capacity.
This role is on-site in Mountain View, CA.
Must be willing to travel 30% of the time.
The estimated salary range for this position is $188,000 to $250,000/annual salary + cash and stock option awards + benefits. At Reliable Robotics, we strive to provide competitive and rewarding compensation based on experience and expertise, as well as market conditions, location, and pay equity.
In addition to base compensation, Reliable Robotics offers stock options, employee medical, 401k contribution, great co-workers and a casual work environment.
This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.
All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.
At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.
If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to
Compensation Range: $188K - $250K
Apply for this Job
Date Posted:
2026-03-10Country:
United States of AmericaLocation:
US-AZ-TUCSON-801 ~ 1151 E Hermans Rd ~ BLDG 801 (External Site)Position Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Ability to obtain INTERIM U.S. government issued security clearance is required prior to start dateAt Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.This position is for an Electrical Engineer II with at least 2 years of professional experience. If you enjoy working in hands-on multidiscipline teams, the Test Equipment Directorate is interested in hearing from you!
The Test Equipment Directorate is a multi-discipline organization responsible for developing test solutions for all Raytheon products. Our engineers are responsible for all elements of the development lifecycle for test. We are hands-on, designing with the latest technology and tools, and integrate state of the art test solutions with the most advanced engineering systems in the world. Typical work involves designing interface assemblies, selection and integration with test instruments and environments, to develop a test system for all Raytheon products. These core activities may be performed for both lab engineering and factory production test systems. The candidate will contribute to the completion of all stages of test product development and will be responsible for helping to maintain the technical, cost and schedule aspects of their assigned projects. They will be expected to act, either as a part of their team or independently, to uncover and resolve issues associated with the development and implementation of test products.
This position will be onsite in Tucson, Arizona
This role will work Second Shift: 4PM-4AM Monday through Friday
What You Will Do:
• Design, development, and integrate Raytheon test products within Test Equipment in multidiscipline engineering teams
• Develop both engineering and production test systems, test interface adapters, cabling, technical drawing creation, schematic creation, circuit design and analysis
• Contribute to the completion of all stages of test product development, and responsible for performing technical, cost and schedule management of assigned projects
• Act, either as a part of the team or independently, to uncover and resolve issues associated with the development and implementation of test products
Qualifications You Must Have:
• Typically requires Bachelor’s degree in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of two (2) years of prior relevant experience OR an Advanced degree
• The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.
• Experience with electrical engineering to include troubleshooting, analysis, and test
• Experience with commonly used electrical engineering design and analysis tools including but not limited to: Altium, DX Designer, Mentor Capital, Creo Schematic
• Experience with commonly used test equipment including but not limited to: Oscilloscopes, DMMs, Network Analyzers, Power Meters
• Experience using schematic capture tools and interpreting schematics
Qualifications We Prefer:
• Master of Science degree in Science, Technology, Engineering or Mathematics (STEM). ABET is the preferred, although not required, accreditation standard
• Ability to provide technical leadership in a multidiscipline team environment
• Experience performing analog, digital, and/or RF design
• Experience designing, testing, and integrating digital, mixed signal, and electrical system interconnect
• Experience utilizing integrated development environments and debugging tools to troubleshoot software
• Self-starter and able to manage workload to meet assigned deadlines
• Experience working in a team environment
• Proficient technical writing and formal presentation experience
• Ability to lead single- or multi-discipline teams of engineers
• Project management experience
• Bid and proposal experience
• Knowledge of computer architecture and computer hardware optimization techniques
• Experience with developing and implementing programming languages
• Utilize existing designs as a starting point to interface with new units under test (UUTs) and UUT configurations when necessary
• Experience with troubleshooting and root-cause analysis
• Knowledge of RTX projects, programs or systems to make enhancements and leverage in daily work.
What We Offer:
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.
Learn More & Apply Now
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Synthesizes customer contractual needs and requirements into system test solutions that acknowledge technical, schedule and cost constraints.
Establishes functional and technical specifications and standards, solves hardware/software interface problems, defines input/output parameters, and ensures integration of the entire system or subsystem.
Reviews, evaluates and derives requirements for testability, develops and directs preparation and execution of comprehensive test plans, procedures and schedules for complete systems and/or subsystems.
Coordinates subsystem and/or system testing activities with programs and other organizations.
Performs analysis of test results and prepares comprehensive subsystem and/or system level evaluation reports which verify and validate system performance.
Writes discrepancy reports and performs integration regression testing to verify/validate incorporated fixes to software, components, subsystems and systems.
Required Experience: -Candidate must have at least 3 years of experience with electrical and mechanical drawings and schematics.
-Candidate must have at least 3 years of experience with basic shop tools, multimeters, oscilloscopes, and other diagnostic tools.
-Candidate must have at least 3 years of experience with Troubleshooting electrical and mechanical systems.
-Candidate must have at least 3 years of experience Authoring test plans, procedures, and reports.
-Candidate must have at least 3 years of experience Developing, presenting, and discussing presentation material technical in nature.
-Candidate must have at least 3 years of experience with Environmental testing.
-Candidate must have at least 3 years of experience with Setting of test instrumentation, collecting test data, and analyzing test data -Candidate must have at least 3 years of experience with Coordinating test plans with leadership, customers, and range personnel -Candidate must have at least 3 years of experience with Presenting test plans to multiple stakeholders -Candidate must have at least 3 years of experience with Planning, leading, conducting complex tests with multiple test objectives Candidate must be able to travel to support work at off-site test locations Candidate must be able to perform work in a lab and an outdoor environment Candidate must be a self starter and able to work independently Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC.
is an equal opportunity employer.
Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics.
The Butler America Aerospace, LLC.
EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices .
Butler America Aerospace, LLC.
is committed to working with and providing reasonable accommodations to individuals with disabilities.
If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Defense, Space & Security (BDS) is seeking a LeadMission SystemFlying Test Bed (FTB) Engineer in Berkeley, MO, supporting an Air Dominance Fixed Wing Proprietary Program. You will be joining a fast-paced program where you will be responsible for integrating and testing advanced tactical sensors onboard three flying test beds. Your work will include developing and planning tests, coordinating FTB modifications, and executing flight tests.
In this role, you will be joining a cross-functional team integrating next generation capabilities as part of a very exciting and critically important development effort. You will have the opportunity to operate in an agile development environment, mature our products through the development lifecycle, work on next generation open-architecture model-based designs, and collaborate across multiple disciplines.
The day-to-day activities of this position will be a combination of traditional design engineering, collaborating with cross-functional peers, and presenting technical challenges and solutions to leadership. Frequent interaction with program leadership, customers, and industry partners during critical design phases will be key elements of this position. This position will provide the candidate an opportunity to develop their engineering skills with potential growth into a leadership role.
Position Responsibilities:
Lead the development of test plans to support key flight test risk reduction activities
Lead a team of test engineers and provide technical guidance to team members to ensure FTB milestones are executed according to plan
Lead the execution of flight tests to characterize mission systems sensor performance
Coordinate with multiple disciplines to define FTB modifications needed to integrate advanced tactical sensors
Coordinate with Boeing, Test, and Evaluation and Tactical Sensors SMEs to ensure all development activities support the FTB schedule
Participate in customer led Combined Test Force (CTF) to support system verification and inform customer decisions and milestones
Manage and monitor team and supplier performance to ensure system integration and compliance with requirements
Utilize Model Based Systems Engineering (MBSE) for test planning, defining test configurations, and documenting test traceability
Lead hardware and software development, integration, test, and validation/verification
Address FTB design/integration problems as they arise and coordinate with technology domain experts and suppliers as necessary
Basic Qualifications (Required Skills and Experience):
Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
9+ years of related work experience and a bachelor’s degree or an equivalent combination of related work experience and technical education
Preferred Qualifications (Desired Skills and Experience):
Experience with flight and/or lab test planning (test plan or test procedure generation) and execution
Experience with aircraft modifications to support avionics integration
Experience with integration of Department of Defense (DoD) tactical platforms subsystems
Experience developing requirements, performing requirement decomposition/traceability, functional decomposition, and interface definition
Experience working on development programs using an Agile/Scrum methodology
Experience working in Cameo or similar Model Based Systems Engineering tools
Experience with verification and validation testing
Conflict of Interest:
Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.
Signing Bonus:
Potential signing bonus for eligible/qualified external candidates
Drug Free Workplace:
Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:
Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.
Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range:
$136,850-$185,150
Applications for this position will be accepted until Mar. 20, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Relocation
This position offers relocation based on candidate eligibility.
Security Clearance
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Date Posted:
2026-02-17Country:
United States of AmericaLocation:
US-AZ-TUCSON-805 ~ 1151 E Hermans Rd ~ BLDG 805Position Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required on day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
This position is for an Electrical Engineer II with at least 2 years of professional experience. If you enjoy working in hands-on multidiscipline teams, the Test Equipment Directorate is interested in hearing from you!
Tucson has a friendly, caring and laid-back atmosphere, combined with the innovation and energy of a metropolitan region and recognized as one of America’s 10 Best Small Cities. Surrounded by beautiful mountains, colorful Sonoran Desert landscape and majestic saguaro cacti, Tucson is blessed with some of nature’s best work. Tucson is known for its bright blue skies, and with more than 310 sunny days per year, Tucson’s fantastic weather lets residents enjoy the outdoors year-round.
The Test Equipment Directorate is a multi-discipline organization responsible for developing test solutions for all Raytheon products. Our engineers are responsible for all elements of the development lifecycle for test. We are hands-on, designing with the latest technology and tools, and integrate state of the art test solutions with the most advanced engineering systems in the world. Typical work involves designing interface assemblies, selection and integration with test instruments and environments, to develop a test system for all Raytheon products. These core activities may be performed for both lab engineering and factory production test systems. The candidate will contribute to the completion of all stages of test product development and will be responsible for helping to maintain the technical, cost and schedule aspects of their assigned projects. They will be expected to act, either as a part of their team or independently, to uncover and resolve issues associated with the development and implementation of test products.
This position is 100% onsite in Tucson, Arizona
What You Will Do:
• Design, development, and integrate Raytheon test products within Test Equipment in multidiscipline engineering teams
• Develop both engineering and production test systems, test interface adapters, cabling, technical drawing creation, schematic creation, circuit design and analysis
• Contribute to the completion of all stages of test product development, and responsible for performing technical, cost and schedule management of assigned projects
• Act, either as a part of the team or independently, to uncover and resolve issues associated with the development and implementation of test products
Qualifications You Must Have:
• Typically requires Bachelor’s degree in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of two (2) years of prior relevant experience OR an Advanced degree
• The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.
• Experience with electrical engineering to include troubleshooting, analysis, and test
• Experience with commonly used electrical engineering design and analysis tools including but not limited to: Altium, DX Designer, Mentor Capital, Creo Schematic
• Experience with commonly used test equipment including but not limited to: Oscilloscopes, DMMs, Network Analyzers, Power Meters
• Experience using schematic capture tools and interpreting schematics
Qualifications We Prefer:
• Master of Science degree in Science, Technology, Engineering or Mathematics (STEM). ABET is the preferred, although not required, accreditation standard
• Ability to provide technical leadership in a multidiscipline team environment
• Experience performing analog, digital, and/or RF design
• Experience designing, testing, and integrating digital, mixed signal, and electrical system interconnect
• Experience utilizing integrated development environments and debugging tools to troubleshoot software
• Self-starter and able to manage workload to meet assigned deadlines
• Experience working in a team environment
• Proficient technical writing and formal presentation experience
• Ability to lead single- or multi-discipline teams of engineers
• Project management experience
• Bid and proposal experience
• Knowledge of computer architecture and computer hardware optimization techniques
• Experience with developing and implementing programming languages
• Utilize existing designs as a starting point to interface with new units under test (UUTs) and UUT configurations when necessary
• Experience with troubleshooting and root-cause analysis
• Knowledge of RTX projects, programs or systems to make enhancements and leverage in daily work.
What We Offer:
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.
Please consider the following role type definition as you apply for this role. Onsite : Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
Clearance Information: Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS) , an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
The Boeing Test & Evaluation (BT&E) Systems Lab Test organization is hiring a Test & Evaluation Power Lab Engineer to support electrical system testing and electrical system lab design in Seattle, WA .
The electrical system lab capability in Seattle provides a dedicated, customizable test and evaluation space for many of Boeing's commercial and military derivative aircraft, supporting projects from early technology development stages to complex, emergent in-service issues. The selected candidate will support on-going lab testing as well as supporting definition and implementation of the future vision for the electrical system testing lab.
Our team is currently hiring for a broad range of experience levels including Associate or Experienced level Test & Evaluation Power Lab Engineer.
Position Responsibilities:
Designs electrical systems diagrams
Supports the development and verification of test methods
Develops detailed test procedures, instrumentation and configuration definition
Performs test and minimize risk within the constraints of the test plan
Implements solutions to calibration systems problems of limited scope and impact
Designs test hardware, software and systems to achieve test requirements
Uses analytical tools to verify the design
Analyzes, processes, and formats data to customer requirements
Reviews test data, including off-nominal data, for accuracy, quality and/or fidelity prior to delivery to customer
Read electrical diagrams
Troubleshoot electrical systems
Prepares and publishes test reports to document test results and satisfy requirements
Presents test results internally
Archives data and reports
Works under general direction
Basic Qualifications (Required Skills/Experience):
Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
1+ years of experience in the use of computer aided design and simulation tools
1+ years of experience with electrical and/or electronic technologies
1+ years of lab test operations experience
Preferred Qualifications (Desired Skills/Experience):
2 or more years’ related work experience or an equivalent combination of education and experience
Bachelor's or higher in Electrical Engineering with strong electrical/electronic background from an accredited college or institution
Experience interacting with customers to coordinate testing requirements and schedule
Experience using electrical design tools including WCAD and Zuken E3
Experience using Microsoft Office Suite
Experience with mechanical systems
Experience with wire design
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Conflict of Interest:
Successful candidate for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.
Union:
This is a union-represented position.
Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage, and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary Pay Range for Associate level (Level 2): $90,950 – $123,050
Summary Pay Range for Mid-level (Level 3): $111,350 – $150,650
Applications for this position will be accepted until Mar. 27, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Education
Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
