Automatic Data Processing Jobs Remote Jobs in Usa
87 positions found — Page 2
P
Shift Leader - Urgently Hiring
Salary not disclosed
TITLE: Shift Leader (SL)
PURPOSE OF THE POSITION: The person holding this supervisory position is considered a part time team member and is responsible and accountable for: the daily operation of the restaurant, assisting the RGM with hiring and training team members, directing the activities of team members, and rewarding or disciplining team members in consultation with the RGM; and, performing these functions in ways that assure compliance with all Company policies and procedures, customer satisfaction, a high level of team member morale and the attainment of sales and profit objectives. The Shift Manager reports directly to the RGM, and holds the second highest position in the restaurant if there is not an Assistant Manager. In restaurants with an Assistant Manager, the Shift Manager is the next highest position.
ESSENTIAL FUNCTIONS: The following accountabilities are essential to this position and a high degree of performance must be achieved in each in order for the incumbent to be successful. These accountabilities are organized according to our six Key Result Areas.
When the word "policies" or the phrase "policies and procedures" or similar language is used in any of the Company's documents, the term refers to all policy and procedure bulletins, manuals, training materials, memoranda, newsletters, communications on the “Document Viewer” on the computer, and all other documents and oral discussions with team members' supervisors, which relate to the restaurant. The management team shall be responsible for ensuring that all team members, including the manager himself/herself, comply with all Company policies and procedures and all Pizza Hut standards at all times and take immediate steps to correct actions not in accordance with such policies, procedures and standards.
I. PROFITABILITY
A.Planning
1.Executes the RGM’s plans and overall Daland Corporation plans to achieve consistent sales growth and profit growth.
2.Achieves planned/budgeted profits, as communicated by the RGM. This involves:
- a.Using established control systems and procedures to measure actual results and to identify deviations from planned results.
- b.Assisting the RGM, as requested, in developing and implementing corrective action plans to assure actual results conform to plan.
B.Policies: Complies with all Company policies and procedures, including but not limited to, those relating to inventory, cash, payroll, food handling, interactions with guests, team members, and vendors, and legal compliance.
C.Manages and Controls Cash: In conjunction with the RGM and other managers, ensures that that all cash and checks, minus the change fund is correctly deposited, credit card transactions are correctly settled, and cash over or short is minimized.
1. Performs Banking Transactions
- a. Assures that two deposits daily are prepared and deposited in the bank (more than two may be required in higher volume units.)
- i. The intent of the first deposit is to remove from the unit an amount approximately equal to the total of cash plus checks, minus the amount of the change fund.
- ii. The first deposit is to be made after 4:00 p.m., when the opening manager is ready to leave for the day.
- iii. The final deposit will be all remaining cash plus checks, minus the change fund.
- iv. The managers may take such deposits to the bank, using his/her personal vehicle, and depending on the time of day, make the deposit in the bank lobby or in the night depository.
- v. Assure the “Weekly Deposit Log” is completed for each deposit made.
- b. If requested by the RGM, the other managers shall perform the following tasks. These are the responsibility of the RGM, but may be delegated to other managers.
- i. Picks up validated deposit slips at the bank.
- ii. Verifies bank validated deposit amounts to sales and cash reports as well as the “Weekly Deposit Log,” and assures all appropriate signatures are on the “Weekly Deposit Log”.
- iii. Sends a copy of the “Weekly Deposit Log” to the Home Office with all other weekly paperwork.
D.Controls cash drawers and team member “banks”, following all established manual and computer procedures.
1. Establishes the correct number of cash drawers. Number of cash drawers in use at one time may vary from one to four depending on size of the restaurant, sales volume, method of delivering services to customer. Amount of cash in each drawer is recorded and kept in the drawer for the duration of the shift, or until “dropped” from the cash drawer to the safe.
2. Establishes cash banks for delivery drivers.
3. As needed, will operate cash drawer following established procedures for cash drawer operation.
4. As necessary, money is removed from cash drawers from time to time and secured in the safe.
5. Throughout the shift, cash drawer transactions, such as paid outs, miscellaneous receipts (paid ins), discounts and promotions are properly accounted for, including all documentation; transactions are properly entered into the computer; and, all documentation is organized and secured for transmitting to the Home Office.
6. Assures cash drawers are counted and balanced at the end of each shift or when there is a change in cashiers.
7. Records tips for servers and drivers on credit card/gift card transactions and correctly settles all credit card/gift card transactions.
8. Inform the RGM anytime cash short exceeds $5 for a day.
9. Reviews reports and otherwise takes actions to ensure that team members properly report actual sales and actual tips, and ensures that team members do not falsify credit card receipts or other Company documents. This requires due diligence on the part of the managers.
E.Assists the RGM in Managing and Controlling Cost of Sales: The actual cost per the P&L must be equal to or between Ideal Cost and Allowable Cost as calculated in the Product Cost Analysis report and Bonus Calculation Sheet. This includes these processes:
1.Utilizes manuals and/or automated procedures approved by the Company, orders all approved products used in the restaurant.
2.Properly accepts deliveries and properly stores inventory items used in the restaurant. This involves these processes:
- a.Checks in products as received off of delivery vehicles to verity product quality and verifies that amounts charged for on delivery receipt/packing slips are for amount of goods received.
- b.Uses a two-wheeled hand truck to unload and products, assists and oversees other team members in proper storage of products. Weight of items varies from 10 to 50 pounds. Full load on two-wheeled hand truck may exceed 500 pounds. Generally, ensures that more than one person is available to perform this task.
- c.“Autoposts” inventory received, or enters on inventory record the amount and cost of each product item received, as noted on delivery receipt/packing slip.
3.Accurately accounts for all product coming into the restaurant, used to prepare products, or transferred out of the restaurant.
4.Assures the proper execution of all recipes and specifications for preparing ingredients and assembling products.
5.Manages waste which involves maintaining a FIFO (First In, First Out) system and marking all products with a Made – Ready – Discard label.
6.Assures the correct order entry procedures are followed by all order takers.
7.Assures compliance with team member consumption policies.
8.Performs a Daily Product Usage Analysis on critical inventory items to assure usage meets guidelines.
9.Communicates goals to team members and follows up with team members to ensure goals are being met.
10.The following tools are used to aid in controlling Cost of Sales:
- FMS Product Cost Analysis Report
- FMS Daily Ideal Usage Report
- FMS Weekly Worksheet Report
- Bonus Calculation Sheet
- Profit and Loss Statement
- The General Ledger
- Prep Variance Report
- Daily Prep Variance Report
F.Assists the RGM in Managing and Controlling Cost of Labor: Ensures that “Flow-thru” targets/goals are achieved; actual hours used do not exceed the established labor model/matrix; and, team member productivity is maximized. This includes these processes:.
1.Ensuring the accuracy and completeness of team member timekeeping records, including tips and team member meals. Updates team member records as needed.
2. Minimizing edits to clock-in/clock-out transactions by assuring team members properly clock in at the beginning of their shift and clock out at the end of their shift.
3. Assuring team members do not clock in earlier than five (5) minutes prior to their scheduled shift.
4. Assuring the man-hours used for opening and closing the restaurant do not exceed established targets.
5.Analyzing actual labor hours used versus earned allowable labor hours and calculating the variance; and, using this information to appropriately manage labor each shift.
6.Communicating and cooperating with the Home Office Payroll Department to assure accuracy in payroll, including information about new hires, raises, promotions, and terminations.
7.Making appropriate recommendations to the RGM regarding wages within Company guidelines.
8.Eliminating overtime hours for team members who are paid on an hourly basis.
9.Eliminating supplemental tip credit pay.
10.Improving team member productivity using the measurements and tools available through the Company, as well as the following:
- Assuring the Back of the House (BOH) is “optimized”:
- i. Organized … a place for everything, and everything in its place
- ii. Lineal Flow … eliminate or minimize back tracking
- iii. Have all items located closest to the next step in the product assembly process
- iv. Minimize the number of steps taken and the reach needed for all items
- Assuring that team members are thoroughly trained.
- Ensuring that “prep levels’ are adequate for the forecasted volume of business for the day, including: products thawing/tempering; raw product prep; preassembled pizza and other products; and so on.
- Ensuring that food preparation areas, make table, cut table, and service areas are stocked appropriately before each shift and maintained during peak volume periods.
- Ensuring products are prepared quickly in accordance with time standards.
- Ensuring that tables vacated by customers are cleared, cleaned, sanitized and reset quickly.
11. Reduces turnover by managing all aspects of the restaurant professionally and in accordance with Company standards.
12. If the RGM has delegated scheduling to the Shift Manager, the Shift Manager uses established procedures to produce a sales forecast to be used in the scheduling process.
G.Managing Other Operating Expenses and Semi-Variable Expenses to Budget or less.
II. CUSTOMER SATISFACTION
A.Maintains positive customer relations, which includes:
1. Assuring personal behaviors and team member behaviors toward all customers are courteous, attentive, respectful, and enthusiastic.
2. Assuring a comfortable environment for customers.
3. Executing "Floor Management" by directing activities and greeting and interacting with customers on each shift worked.
4. Immediately resolving customer complaints by apologizing first and then assuring the satisfaction of the customer. Complaints may be received in person, by phone, or in writing. Consult with the RGM if the customer is not satisfied with your suggested resolution.
- a. B.L.A.S.T. is the acronym we use for our complaint resolution process:
- Believe the customer
- Listen to the customer
- Apologize to the customer
- Satisfy the customer
- Thank the customer
5. Immediately contacting the RGM (or DM if the RGM is not available immediately) regarding any incidents in which customers are injured or in which customers claim some harm done to them.
B. Ensures customers receive prompt, quality service. This includes:
1. If the RGM has delegated scheduling to the Shift Manager, scheduling the correct number of team members for forecast sales volume; and deploying those Team members in the correct job roles.
2. Following established service guidelines and procedures to assure all Hospitality Standards are achieved.
3. Directing team member activities to assure speed of service standards are met or exceeded, including product preparation times and delivery times.
4. Personally serving customers as required to meet the demand of the volume of business.
5. Ensuring customers are greeted properly and seated as quickly as appropriate.
6. Recognizing and dealing effectively with the special needs of customers.
7. Ensuring that customer orders are taken promptly, prepared accurately, and served quickly.
8. Ensuring customer follow-up, which means servers check back with customers frequently to see if there is anything else needed.
9. Ensuring immediate attention is given to customers ready to pay, either by prompting servers to complete the table cashout procedure or by performing the transaction of cashing out customer as needed.
10. Ensuring the phone is answered promptly and courteously, following the Telephone Service Essentials.
11. Responding to customers at pickup counter and drive-thru window; finding order; collecting money for the order; verifying order to customer; and, thanking customers.
12. Dispatching orders for delivery customers as required to meet the demands of the volume of business, grouping orders by geographical destination and instructing drivers as they arrive and depart which orders to take with them and where to go.
13. Delivering pizzas as necessary to meet the demands of the business.
14. Ensuring customers are thanked for their business.
C.Ensures quality ingredients are used to prepare all products. This includes:
1. Maintaining Food Safe Temperatures for all ingredients and products.
2. Ensuring food preparation utensils and food contact surfaces are property cleaned and sanitized.
3. Ensuring that procedures for receiving, handling and storing ingredients are followed.
4. Recognizing and correcting any raw ingredients or product problems.
5. Maintaining inventory levels which assure product freshness and no outages.
6. Eliminating the potential for cross contamination.
7. Ensuring that proper procedures are followed to prepare ingredients (dough, sauces, meats, cheeses, and vegetables).
8. Ensuring salad bar is maintained according to standards of operation (restaurant only).
9. Personally preparing ingredients as necessary.
D. Ensures quality products, which includes:
1. Planning dough, ingredient and product preparation to meet sales volumes and personally preparing these items, as necessary, to meet the demand of the business.
2. If deemed appropriate by the RGM, performing a product cookability test to verify proper oven and belt speed.
3. Following proper procedures to process customer orders.
4. Personally preparing and cooking menu items as required to meet the demands of the volume of business.
5. Taking every appropriate action, in consultation with the RGM, including driving to another restaurant to pick up product, to resolve outage or potential outage situations.
6. Maintaining inventory levels which assure product freshness and no outages.
7. Planning dough, ingredient and product preparation to meet sales volumes and personally preparing these items, as necessary, to meet the demand of the business.
8. Assuring all products are prepared according to exact specifications, recipes and procedures.
9. Personally preparing and cooking menu items as required to meet the demands of the volume of business.
E.Ensures that all standards for cleanliness and sanitation are met or exceeded, with particular attention to:
1. Restrooms.
2. Table tops; booth backs and seats; and chair seats.
3. Silverware, plateware, and glassware.
4. Dining room floors.
5. Salad bar.
F.Implements new or approved changes in policies, procedures and/or operation standards. This involves:
1. Attending training sessions.
2. Reading "Rollout Guides" or other resources.
3. Assisting the RGM with training restaurant team members of new procedures or changes.
4. Participating in crew training and other actions in the restaurant to assure full and correct implementation.
5. If requested by the RGM, assisting with updating all manuals, resources and job aids as required.
III.PEOPLE
A.Maintains positive team member relations and a positive and productive workplace, which involves:
1. Building relationships with team members based on mutual trust and respect.
2. Communicating and following the Daland “5 Star” Vision and Core Beliefs.
3. Promoting teamwork.
4. Being familiar with benefits available to team members, and referring appropriate questions to the RGM regarding these benefits.
5. Informing the RGM of all team member grievances.
6. Performing correct and consistent administration of team member disciplinary procedures, and discussing all recommended discipline with the RGM.
7. Assuring compliance with various governmental regulations, such as ensuring that all team members are clocked in while working, complying with overtime laws, child labor laws, alcoholic beverage laws, anti-discrimination and anti-harassment laws, FLSA, EEO, etc.
8. Performing consistent administration of and compliance with Company policies and procedures.
9. Communicating effectively with the crew and management team.
10. Assuring team member understanding of the Daland Corporation organization structure and career opportunities within the Company.
B. Assists the RGM with managing the size and quality of staff. The following are responsibilities of the RGM, but if requested by the RGM, the Shift Manager may assist with the following:
1. Planning, recruiting, and hiring to assure a full staff at all times and to assure adequate time for processing MVR's (motor vehicle reports), background checks, etc. Only the RGM is authorized to hire new team members; and Shift Managers are only permitted to interview applicants if authorized by the RGM.
2. Continuously recruiting and taking applications from job candidates.
3. If requested by the RGM, utilizing staffing tools, such as the Pizza Hut Hiring Zone and the team member Assessment; interviewing job candidates; and, checking their references.
4. If requested by the RGM, making recommendations to the RGM regarding the best qualified candidates.
5. Complying with Company employment practices and governmental regulations, including EEO, ADA Title I, etc.
C.Assisting the RGM in training newly hired team members and team members preparing for promotions. This involves:
1. Following Company training policies and meeting Pizza Hut Training Standards.
2. Utilizing on-line training, trainer's guides, checklists, job aids, tests and other training resources to assure a thorough job of training.
3. Using the four step training process of: (1) Preparation (2) Show & Tell; (3) Guided Practice; and (4) Follow-up to assure the trainee can perform all tasks up to required standards prior to being allowed to perform the tasks "solo."
D. Manages team member performance and supervises work. This includes:
1.Utilizing Coaching for Results, which includes:
- a.Activating team member behavior.
- (1)Providing guidance, direction, and reassurance to all team members.
- (2)Communicating non-negotiable standards of performance to team members.
- (3)Conducting team member meetings, group training sessions and Jump Start meetings.
- (4)Assigning Team members tasks from the Opening, Closing and Maintenance checklist.
- (5)Communicating job assignments for each shift to team members and assuring each team member works their assignment.
- (6)Giving instructions to team members that are clear and assure understanding.
- (7)Assigning team members to breaks.
- (8)Sending team members home early if not needed due to business conditions.
- (9)Calling team members in early, or calling extra team members to work to cover unanticipated surges in business volume.
- (10)Assuring all opening, shift, and closing job duties are completed and performed correctly.
- b.Evaluating team member behavior.
- (1)Observing team member performance each shift.
- (2)Working along side team members and assisting in the performance of their tasks, as needed.=
- (3)Monitoring team member meals and signing team member meal guest checks.
- (4)Ensuring adherence to alcoholic beverage laws of the local community
- (5)Conducting regular, written performance appraisals on all subordinates, using the procedure and forms provided by the Company and within the time specified in compensation plans.
- c.Responding to team member behavior with consequences.
- (1)Taking action (corrective or positive reinforcement) to assure team member performance meets or exceeds standards.
- (2)Providing ongoing counseling that gives praise and recognition to team members for jobs well done; identifies areas of performance needing improvement and methods for improving; and, if required, gives reprimands that are job focused.
2.Handling non-routine occurrences/emergencies and informing the RGM of such occurrences/emergencies.
E. Assists RGM with developing promotable team members in his/her restaurant and promotable management for Daland. This includes:
1. Using Company training programs and resources to prepare candidates for promotions and to assure that the management team is 100% certified in management processes, systems, policies, and procedures.
2. Making recommendations to the RGM regarding which team members are eligible for promotion to Shift Manager/Leader.
F. Assists RGM with personnel administration functions, which includes:
1. Assuring team members complete all required personnel documents such as W-4's, I-9's, Team member Acknowledgment, Arbitration Agreement, Delivery Driver Statement, New Driver Checklist, etc.; and, that these required documents are transmitted to the Home Office.
2. Documenting required payroll data for team members, including accurate recording of hours;
3. Managing worker's compensation claims, etc. in accordance with Company policies and procedures.
4. Maintaining personnel files on all team members, which includes filing all personnel documents; recording training dates, vacation dates, evaluation dates, pay increases, and absences; etc.
IV. MARKETING
A.Implements marketing programs to increase business. This includes:
1. Engaging in positive community/public relations for Pizza Hut.
2. Providing input for promotional ideas.
3. Displaying and maintaining Point of Purchase (P.O.P.) and other elements of national, co-op or local marketing programs;
4. Properly executing authorized marketing programs, including new product tests.
5. Taking initiative to recommend new opportunities for increasing business.
V. FACILITIES
A.Maintains a quality environment for our customers and team members. This includes:
1. Conducting routine Preventive Maintenance on the facility and equipment.
2. Taking corrective actions pursuant to the RGM’s safety inspections.
3. Advising the RGM regarding non-routine problems and following up to assure such problems are corrected.
4. Maintaining cleanliness and sanitation in all areas of the restaurant.
5. Organizing all work space to ensure ease of operation.
6. Providing a quality work environment that is safe and complies with all OSHA regulations.
7. Cleaning and organizing refrigeration units.
8. Ensuring floors are clean and free from obstruction.
9. Keeping HVAC vents and filters clean.
10. Ensuring trash is disposed of promptly and according to security procedures.
11. Ensuring parking lot and grounds are free of trash and debris and taking action to correct deficiencies.
12. Ensuring all equipment is used according to proper operational procedures.
13. Keeping restrooms cleaned and stocked.
14. Keeping food prep areas cleaned and sanitized according to approved procedures.
15. Ensuring the daily cleaning and maintenance of all equipment.
16. Correcting any unsafe conditions.
17. Following up to ensure all Scheduled Maintenance and Daily CM&A items are completed.
VI. ADMINISTRATION
A.Effectively manages time, allocating an appropriate amount to each Key Result Area.
B.Manages all paperwork, documentation, written reports, etc. and assures these are always submitted on time and that they are accurate, complete and organized.
C.If requested by the RGM, orders inventory items used in the restaurant. This involves these processes:
1. Review of the Inventory on Hand is performed. The Inventory on Hand is compared to the Weekly Ideal Usage, which is obtained from the Product Cost Analysis report, and a determination is made as to the amount of each particular item to order. The order is then recorded on an order sheet, or is entered into the computer for electronic transfer of order information.
2. Amount ordered of each item may be adjusted upward or downward based on projections of upcoming sales trends, coupon impact, weather changes or other extra-restaurant environmental changes.
3. Calls in orders for supplies on the phone, or electronically submits order via computer.
D.If requested by the RGM, conducts weekly inventory of all food, paper and beverage products used in the unit. This involves these processes:
1. Physically reviewing and counting the inventory on hand (which involves climbing shelves, bending, kneeling, etc.).
2. Rearranging inventory to assure proper rotation (first in, first out) and to make it easier to count and control.
3. Recording amounts of inventory on hand on the inventory form.
E.If requested by the RGM, prepares the weekly labor schedules. This involves these processes:
1. Updating Guest Check Comments file in the restaurant computer to assist in forecasting labor hours.
2. Reviewing Guest Check Comments file and upcoming promotions that may affect sales during the upcoming week.
3. Forecasting anticipated sales volume by shift, by day and by week. The forecast is based on knowledge of any outside events that may influence sales such as coupons, promotions, etc. Particular consideration must be given to how sales are generated--that is, dine-in business contrasted to carry-out business or delivery business.
4. Updating sales forecasts in the FMS (computer system) based on outside events that may influence sales.
5. Reviewing requests for days off that have been turned in by team members and when possible allowing for requested days off.
6. Using experience, past schedules, Black Book information, Guest Check Comments, knowledge of team members' abilities, labor goals, and FMS (computer system) recommended labor schedule to assist in scheduling the proper number of team members each shift to meet sales volume and labor hour guidelines.
7. Obtaining the RGM's approval of the schedule, then posting the final schedule in accordance with Daland Corporation's policies and procedures.
F.Performs daily accounting procedures. This includes these processes:
1. At close of business day requests a sales report from the FMS computer to determine total sales entered into the cash drawers throughout the system.
2. Any cash paidouts or miscellaneous deposits from the day are verified with what is in the system.
3. Cash on hand is counted and reconciled against total sales.
4. Total deposit is calculated, and a deposit is prepared.
5. Dough waste and PPP waste is documented and calculated on the form provided and filed for use in forecasting future prep levels.
6. All gift checks are counted and verified against prior counts less current gift check sales on the Gift Check Tracking form.
G.If requested by the RGM, performs weekly accounting procedures. This includes these processes:
1. Completing, as required, the Weekly Sales Analysis and analyzing it.
2. Completing the Weekly Inventory.
3. Completing the payroll functions.
4. Analyzing the Daily Business Summary Report to determine performance in key measurement areas.
5. Preparing the weekly packet for the home office, using the checklist provided to assure all required items are included.
6. Calling any needed FRS numbers or statistics to the District Manager.
H.Meets all deadlines and assures that subordinates meet their deadlines.
I.Manages all paperwork, documentation, written reports, etc. and assures these are always submitted on time and that they are accurate, complete and organized.
J.Maintains and updates required files, manuals, and reports.
NON-ESSENTIAL FUNCTIONS: The "non-essential" functions are routinely performed by the person holding the Shift Manager's position and they are essential to the effective operation of the restaurant. However, these functions are considered "non-essential" to the position. The Manager on Duty is then accountable for assuring the delegated functions are correctly performed.
A.Receives and stores inventory items used in the unit. This involves these processes:
1. Checking in products as received off delivery vehicles to verify product quality and that amount charged for on the delivery receipt/packing slip is correct when compared to amount received. Signing the delivery receipt/packing slips for amount of goods received.
2. Using a two-wheeled hand truck, assists and oversees other employees in proper storage of products. Weight of items varies. Generally, more than one person is available to perform this task.
3. Entering on inventory screen of the computer the amount and cost of each product item received as noted on the delivery receipt/packing slip.
MINIMUM QUALIFICATIONS/REQUIREMENTS: The following are the qualifications and minimum requirements necessary for a person to perform this job.
A.Ability to work a minimum of three (3) days and at least 30 hours per week, but must be available to work more than 30 hours per week if necessary due to business necessity. In addition to having the flexibility to work a variety of shifts, including late nights and weekends.
B.Valid driver's license, insurance and automobile. Position involves taking large amounts of cash receipts to the bank at different times of the day including at night. Banks are generally at a distance requiring a person to drive to the bank. Position may also need automobile to pick up product, make pizza deliveries, etc.
C.Able and willing to travel. Position requires occasional travel for training, new store openings and meetings, which may be held at a distance from home not feasible to drive daily. Overnight stays at an out-of-town location may be required during the training sessions, new store opening, and meetings for up to one week at a time.
D.Telephone (cellular or land line) at residence. There are circumstances that may arise at the restaurant of which the manager must be informed while off duty.
E.Sufficient physical agility to perform the functions of the position. This includes these processes:
1. Sufficient physical strength to lift most items used in the operation of the restaurant.
2. Sufficient communication skills. Position involves communicating with team members, superiors and customers.
3. Ability to move at a fairly quick pace and to remain stationary for periods of six to eight hours at a time. The position requires person to perform all of the above at different times and intervals as needed by the realities of the environment and the position.
F.Ability to maintain a state of self-composure under conditions of stress and anxiety. Position routinely involves stress resulting from work overload, role ambiguity, conflicting demands from various customers, and team members. Person in this position must be able to function effectively under these conditions.
G.Previous experience with this Company as a Shift Manager/Leader; or previous restaurant management experience with another Company.
H.Sufficient mental and cognitive ability to perform the calculations and fill in the sales and product tracking forms used by the Company. Estimate is that ability to read, write and perform arithmetic procedures at the 12th grade level will be sufficient.
I.Ability to perform all of the duties of the hourly team members and supervisors under this person's supervision. As time and circumstances dictate the person in this position may have to assist or take over the duties of an hourly team member in order to expedite good customer service. Also necessary in order to train new team members in this function.
J.Ability to communicate effectively with a large variety of persons with diverse backgrounds. Position is one where incumbent provides direction and supervision to a variety of subordinates with diverse levels of education, differences in ages, and experience. Must be able to express ideas and concepts to these persons to assure teamwork through organization and leadership.
EQUIPMENT USED:
Standard restaurant office equipment such as calculator, telephone, and computer.
"Pizza Wheel". This is a device with a handle and a round stainless steel blade that is used to cut certain types of pizza dough crusts.
"Rocker Knife". This is a device about two feet long with a stainless steel handle that extends across the top of a stainless steel blade fashioned in a curve. It is used to cut certain types of pizzas by placing on the pizza and rocking the blade across the pizza surface.
"Vegetable Chopper". This is a hand operated mechanical device used to slice whole raw vegetables into smaller pieces for use on the make table.
"Crock". A generic term used to describe a variety of containers used to hold food items served on a salad bar. Knives, spoons, spatulas and other common utensils.
"Make Table". An open topped, refrigerated, compartmented table for the storage of food items used in the preparation of products for customer orders. Has doors which allow access to interior refrigerated section below the table top where additional food items are stored as back-up for the items stored on top of the table.
"Cut Table". A stainless steel table where cooked pizzas are cut into slices and where other products are assembled prior to serving them to the customer.
"Oven". A power driven device operating at high temperatures used to bake food products.
"Automatic Dishwasher". A mechanical device consisting of: (1) a dirty dish/rinse table, used to rinse and prepare dishes for washing; (2) dishwasher compartment, where dishes are washed with hot water, soap, sanitizing chemical and pressurized water; and, (3) clean dish/drain table, where clean dishes drain, dry and are sorted for storage.
"Dough Proofer". A metal cabinet heated to approximately 95 degrees Fahrenheit, in which panned dough is placed to obtain the correct rise in the dough.
"Three Compartment Sink". A stainless steel sink, separated into three compartments used to wash, rinse and sanitize all kitchen tools, and smallwares not washed in the automatic dishwasher.
"Pan Gripper". This is a mechanical device used to grip certain types of pizza pans for purposes of lifting or carrying when they have been heated to a high temperature.
"Portion Cups". These are pre-measured cups used by Pizza Hut restaurants for portioning cheese and toppings for pizzas.
"Scales". This is a small table model scale used to weigh and portion ingredients used in the recipes of various products.
"Pan Separators". These are plastic items, of varying shape, diameter and circumference, used to separate pans filled with dough to protect the dough inside the pan from contamination and to allow pans to be stacked for storage.
"Dough Perforator". This is a mechanical device consisting of a handle attached to a small wheeled drum that is dotted with metal protrusions. It is used to perforate certain types of dough prior to topping to prevent formation of bubbles during baking.
"Cutting Board". This is a hard surface board, rectangular or square in shape, on which pizzas and other food products are cut.
"Reach In". A refrigerated piece of equipment with doors which open to allow dough or pizza ingredients to be stored inside for easy access.
"Scraper Block". A device with a stainless steel blade and a wooden handle in a rectangular shape used to cut dough for portioning, and scraping the make table/cut table surfaces off for cleaning.
"Prep Table". A table about 34 to 36 inches high, with a stainless steel top. The table is used as a work surface for the preparation of many ingredient items used in the Pizza Hut.
“Kitchen and Dining Utensils". Such as knives, spoons, spatulas, etc.
"Plates, Bowls, Mugs, Tumblers". and other items to serve food and beverages to customers.
"Spoon". A stainless steel device with a long handle and a curved end used for applying sauce to prepared dough.
"Pan". A round metal device with a raised edge for holding dough prior to topping and baking.
"Walk-in". A refrigerated compartment of sufficient size to allow the individual to actually walk into the refrigerated compartment to obtain or store perishable items. Compartment may be sufficiently cold to freeze items.
"Freezer". A refrigerated box maintained at sufficient cold temperatures so as to freeze items stored inside.
"Ice Machine". A device that automatically receives water, freezes it, and stores it as ice in an attached storage bin.
"Soda Dispenser" (pop machine). A device that mixes syrup and carbonated water and dispenses carbonated soft beverage (soda, pop).
"Point of Sale Computer". Electronic device used in tracking orders, inventory, payroll information. Contains cash drawer used to make change for customer transactions, track paidouts, delivery orders, dispatching.
"FMS" Field Management System. Software used on the point of sale computer that provides management information necessary in managing the day to day operations of the restaurant.
Miscellaneous equipment such as a telephone, carry-out boxes and bags, hand towels, etc.
Serving tray, ticket book, bus tub, flatware and other small items.
Note: Many restaurants have additional equipment such as beer boxes, spaghetti magic machine, etc.
PLACES WHERE WORK IS PERFORMED: This work is performed on the employer's premises. Location of premises may vary throughout the employer's Company. This job description was developed by observing the work in process and from information provided by the management of Daland Corporation.
PURPOSE OF THE POSITION: The person holding this supervisory position is considered a part time team member and is responsible and accountable for: the daily operation of the restaurant, assisting the RGM with hiring and training team members, directing the activities of team members, and rewarding or disciplining team members in consultation with the RGM; and, performing these functions in ways that assure compliance with all Company policies and procedures, customer satisfaction, a high level of team member morale and the attainment of sales and profit objectives. The Shift Manager reports directly to the RGM, and holds the second highest position in the restaurant if there is not an Assistant Manager. In restaurants with an Assistant Manager, the Shift Manager is the next highest position.
ESSENTIAL FUNCTIONS: The following accountabilities are essential to this position and a high degree of performance must be achieved in each in order for the incumbent to be successful. These accountabilities are organized according to our six Key Result Areas.
When the word "policies" or the phrase "policies and procedures" or similar language is used in any of the Company's documents, the term refers to all policy and procedure bulletins, manuals, training materials, memoranda, newsletters, communications on the “Document Viewer” on the computer, and all other documents and oral discussions with team members' supervisors, which relate to the restaurant. The management team shall be responsible for ensuring that all team members, including the manager himself/herself, comply with all Company policies and procedures and all Pizza Hut standards at all times and take immediate steps to correct actions not in accordance with such policies, procedures and standards.
I. PROFITABILITY
A.Planning
1.Executes the RGM’s plans and overall Daland Corporation plans to achieve consistent sales growth and profit growth.
2.Achieves planned/budgeted profits, as communicated by the RGM. This involves:
- a.Using established control systems and procedures to measure actual results and to identify deviations from planned results.
- b.Assisting the RGM, as requested, in developing and implementing corrective action plans to assure actual results conform to plan.
B.Policies: Complies with all Company policies and procedures, including but not limited to, those relating to inventory, cash, payroll, food handling, interactions with guests, team members, and vendors, and legal compliance.
C.Manages and Controls Cash: In conjunction with the RGM and other managers, ensures that that all cash and checks, minus the change fund is correctly deposited, credit card transactions are correctly settled, and cash over or short is minimized.
1. Performs Banking Transactions
- a. Assures that two deposits daily are prepared and deposited in the bank (more than two may be required in higher volume units.)
- i. The intent of the first deposit is to remove from the unit an amount approximately equal to the total of cash plus checks, minus the amount of the change fund.
- ii. The first deposit is to be made after 4:00 p.m., when the opening manager is ready to leave for the day.
- iii. The final deposit will be all remaining cash plus checks, minus the change fund.
- iv. The managers may take such deposits to the bank, using his/her personal vehicle, and depending on the time of day, make the deposit in the bank lobby or in the night depository.
- v. Assure the “Weekly Deposit Log” is completed for each deposit made.
- b. If requested by the RGM, the other managers shall perform the following tasks. These are the responsibility of the RGM, but may be delegated to other managers.
- i. Picks up validated deposit slips at the bank.
- ii. Verifies bank validated deposit amounts to sales and cash reports as well as the “Weekly Deposit Log,” and assures all appropriate signatures are on the “Weekly Deposit Log”.
- iii. Sends a copy of the “Weekly Deposit Log” to the Home Office with all other weekly paperwork.
D.Controls cash drawers and team member “banks”, following all established manual and computer procedures.
1. Establishes the correct number of cash drawers. Number of cash drawers in use at one time may vary from one to four depending on size of the restaurant, sales volume, method of delivering services to customer. Amount of cash in each drawer is recorded and kept in the drawer for the duration of the shift, or until “dropped” from the cash drawer to the safe.
2. Establishes cash banks for delivery drivers.
3. As needed, will operate cash drawer following established procedures for cash drawer operation.
4. As necessary, money is removed from cash drawers from time to time and secured in the safe.
5. Throughout the shift, cash drawer transactions, such as paid outs, miscellaneous receipts (paid ins), discounts and promotions are properly accounted for, including all documentation; transactions are properly entered into the computer; and, all documentation is organized and secured for transmitting to the Home Office.
6. Assures cash drawers are counted and balanced at the end of each shift or when there is a change in cashiers.
7. Records tips for servers and drivers on credit card/gift card transactions and correctly settles all credit card/gift card transactions.
8. Inform the RGM anytime cash short exceeds $5 for a day.
9. Reviews reports and otherwise takes actions to ensure that team members properly report actual sales and actual tips, and ensures that team members do not falsify credit card receipts or other Company documents. This requires due diligence on the part of the managers.
E.Assists the RGM in Managing and Controlling Cost of Sales: The actual cost per the P&L must be equal to or between Ideal Cost and Allowable Cost as calculated in the Product Cost Analysis report and Bonus Calculation Sheet. This includes these processes:
1.Utilizes manuals and/or automated procedures approved by the Company, orders all approved products used in the restaurant.
2.Properly accepts deliveries and properly stores inventory items used in the restaurant. This involves these processes:
- a.Checks in products as received off of delivery vehicles to verity product quality and verifies that amounts charged for on delivery receipt/packing slips are for amount of goods received.
- b.Uses a two-wheeled hand truck to unload and products, assists and oversees other team members in proper storage of products. Weight of items varies from 10 to 50 pounds. Full load on two-wheeled hand truck may exceed 500 pounds. Generally, ensures that more than one person is available to perform this task.
- c.“Autoposts” inventory received, or enters on inventory record the amount and cost of each product item received, as noted on delivery receipt/packing slip.
3.Accurately accounts for all product coming into the restaurant, used to prepare products, or transferred out of the restaurant.
4.Assures the proper execution of all recipes and specifications for preparing ingredients and assembling products.
5.Manages waste which involves maintaining a FIFO (First In, First Out) system and marking all products with a Made – Ready – Discard label.
6.Assures the correct order entry procedures are followed by all order takers.
7.Assures compliance with team member consumption policies.
8.Performs a Daily Product Usage Analysis on critical inventory items to assure usage meets guidelines.
9.Communicates goals to team members and follows up with team members to ensure goals are being met.
10.The following tools are used to aid in controlling Cost of Sales:
- FMS Product Cost Analysis Report
- FMS Daily Ideal Usage Report
- FMS Weekly Worksheet Report
- Bonus Calculation Sheet
- Profit and Loss Statement
- The General Ledger
- Prep Variance Report
- Daily Prep Variance Report
F.Assists the RGM in Managing and Controlling Cost of Labor: Ensures that “Flow-thru” targets/goals are achieved; actual hours used do not exceed the established labor model/matrix; and, team member productivity is maximized. This includes these processes:.
1.Ensuring the accuracy and completeness of team member timekeeping records, including tips and team member meals. Updates team member records as needed.
2. Minimizing edits to clock-in/clock-out transactions by assuring team members properly clock in at the beginning of their shift and clock out at the end of their shift.
3. Assuring team members do not clock in earlier than five (5) minutes prior to their scheduled shift.
4. Assuring the man-hours used for opening and closing the restaurant do not exceed established targets.
5.Analyzing actual labor hours used versus earned allowable labor hours and calculating the variance; and, using this information to appropriately manage labor each shift.
6.Communicating and cooperating with the Home Office Payroll Department to assure accuracy in payroll, including information about new hires, raises, promotions, and terminations.
7.Making appropriate recommendations to the RGM regarding wages within Company guidelines.
8.Eliminating overtime hours for team members who are paid on an hourly basis.
9.Eliminating supplemental tip credit pay.
10.Improving team member productivity using the measurements and tools available through the Company, as well as the following:
- Assuring the Back of the House (BOH) is “optimized”:
- i. Organized … a place for everything, and everything in its place
- ii. Lineal Flow … eliminate or minimize back tracking
- iii. Have all items located closest to the next step in the product assembly process
- iv. Minimize the number of steps taken and the reach needed for all items
- Assuring that team members are thoroughly trained.
- Ensuring that “prep levels’ are adequate for the forecasted volume of business for the day, including: products thawing/tempering; raw product prep; preassembled pizza and other products; and so on.
- Ensuring that food preparation areas, make table, cut table, and service areas are stocked appropriately before each shift and maintained during peak volume periods.
- Ensuring products are prepared quickly in accordance with time standards.
- Ensuring that tables vacated by customers are cleared, cleaned, sanitized and reset quickly.
11. Reduces turnover by managing all aspects of the restaurant professionally and in accordance with Company standards.
12. If the RGM has delegated scheduling to the Shift Manager, the Shift Manager uses established procedures to produce a sales forecast to be used in the scheduling process.
G.Managing Other Operating Expenses and Semi-Variable Expenses to Budget or less.
II. CUSTOMER SATISFACTION
A.Maintains positive customer relations, which includes:
1. Assuring personal behaviors and team member behaviors toward all customers are courteous, attentive, respectful, and enthusiastic.
2. Assuring a comfortable environment for customers.
3. Executing "Floor Management" by directing activities and greeting and interacting with customers on each shift worked.
4. Immediately resolving customer complaints by apologizing first and then assuring the satisfaction of the customer. Complaints may be received in person, by phone, or in writing. Consult with the RGM if the customer is not satisfied with your suggested resolution.
- a. B.L.A.S.T. is the acronym we use for our complaint resolution process:
- Believe the customer
- Listen to the customer
- Apologize to the customer
- Satisfy the customer
- Thank the customer
5. Immediately contacting the RGM (or DM if the RGM is not available immediately) regarding any incidents in which customers are injured or in which customers claim some harm done to them.
B. Ensures customers receive prompt, quality service. This includes:
1. If the RGM has delegated scheduling to the Shift Manager, scheduling the correct number of team members for forecast sales volume; and deploying those Team members in the correct job roles.
2. Following established service guidelines and procedures to assure all Hospitality Standards are achieved.
3. Directing team member activities to assure speed of service standards are met or exceeded, including product preparation times and delivery times.
4. Personally serving customers as required to meet the demand of the volume of business.
5. Ensuring customers are greeted properly and seated as quickly as appropriate.
6. Recognizing and dealing effectively with the special needs of customers.
7. Ensuring that customer orders are taken promptly, prepared accurately, and served quickly.
8. Ensuring customer follow-up, which means servers check back with customers frequently to see if there is anything else needed.
9. Ensuring immediate attention is given to customers ready to pay, either by prompting servers to complete the table cashout procedure or by performing the transaction of cashing out customer as needed.
10. Ensuring the phone is answered promptly and courteously, following the Telephone Service Essentials.
11. Responding to customers at pickup counter and drive-thru window; finding order; collecting money for the order; verifying order to customer; and, thanking customers.
12. Dispatching orders for delivery customers as required to meet the demands of the volume of business, grouping orders by geographical destination and instructing drivers as they arrive and depart which orders to take with them and where to go.
13. Delivering pizzas as necessary to meet the demands of the business.
14. Ensuring customers are thanked for their business.
C.Ensures quality ingredients are used to prepare all products. This includes:
1. Maintaining Food Safe Temperatures for all ingredients and products.
2. Ensuring food preparation utensils and food contact surfaces are property cleaned and sanitized.
3. Ensuring that procedures for receiving, handling and storing ingredients are followed.
4. Recognizing and correcting any raw ingredients or product problems.
5. Maintaining inventory levels which assure product freshness and no outages.
6. Eliminating the potential for cross contamination.
7. Ensuring that proper procedures are followed to prepare ingredients (dough, sauces, meats, cheeses, and vegetables).
8. Ensuring salad bar is maintained according to standards of operation (restaurant only).
9. Personally preparing ingredients as necessary.
D. Ensures quality products, which includes:
1. Planning dough, ingredient and product preparation to meet sales volumes and personally preparing these items, as necessary, to meet the demand of the business.
2. If deemed appropriate by the RGM, performing a product cookability test to verify proper oven and belt speed.
3. Following proper procedures to process customer orders.
4. Personally preparing and cooking menu items as required to meet the demands of the volume of business.
5. Taking every appropriate action, in consultation with the RGM, including driving to another restaurant to pick up product, to resolve outage or potential outage situations.
6. Maintaining inventory levels which assure product freshness and no outages.
7. Planning dough, ingredient and product preparation to meet sales volumes and personally preparing these items, as necessary, to meet the demand of the business.
8. Assuring all products are prepared according to exact specifications, recipes and procedures.
9. Personally preparing and cooking menu items as required to meet the demands of the volume of business.
E.Ensures that all standards for cleanliness and sanitation are met or exceeded, with particular attention to:
1. Restrooms.
2. Table tops; booth backs and seats; and chair seats.
3. Silverware, plateware, and glassware.
4. Dining room floors.
5. Salad bar.
F.Implements new or approved changes in policies, procedures and/or operation standards. This involves:
1. Attending training sessions.
2. Reading "Rollout Guides" or other resources.
3. Assisting the RGM with training restaurant team members of new procedures or changes.
4. Participating in crew training and other actions in the restaurant to assure full and correct implementation.
5. If requested by the RGM, assisting with updating all manuals, resources and job aids as required.
III.PEOPLE
A.Maintains positive team member relations and a positive and productive workplace, which involves:
1. Building relationships with team members based on mutual trust and respect.
2. Communicating and following the Daland “5 Star” Vision and Core Beliefs.
3. Promoting teamwork.
4. Being familiar with benefits available to team members, and referring appropriate questions to the RGM regarding these benefits.
5. Informing the RGM of all team member grievances.
6. Performing correct and consistent administration of team member disciplinary procedures, and discussing all recommended discipline with the RGM.
7. Assuring compliance with various governmental regulations, such as ensuring that all team members are clocked in while working, complying with overtime laws, child labor laws, alcoholic beverage laws, anti-discrimination and anti-harassment laws, FLSA, EEO, etc.
8. Performing consistent administration of and compliance with Company policies and procedures.
9. Communicating effectively with the crew and management team.
10. Assuring team member understanding of the Daland Corporation organization structure and career opportunities within the Company.
B. Assists the RGM with managing the size and quality of staff. The following are responsibilities of the RGM, but if requested by the RGM, the Shift Manager may assist with the following:
1. Planning, recruiting, and hiring to assure a full staff at all times and to assure adequate time for processing MVR's (motor vehicle reports), background checks, etc. Only the RGM is authorized to hire new team members; and Shift Managers are only permitted to interview applicants if authorized by the RGM.
2. Continuously recruiting and taking applications from job candidates.
3. If requested by the RGM, utilizing staffing tools, such as the Pizza Hut Hiring Zone and the team member Assessment; interviewing job candidates; and, checking their references.
4. If requested by the RGM, making recommendations to the RGM regarding the best qualified candidates.
5. Complying with Company employment practices and governmental regulations, including EEO, ADA Title I, etc.
C.Assisting the RGM in training newly hired team members and team members preparing for promotions. This involves:
1. Following Company training policies and meeting Pizza Hut Training Standards.
2. Utilizing on-line training, trainer's guides, checklists, job aids, tests and other training resources to assure a thorough job of training.
3. Using the four step training process of: (1) Preparation (2) Show & Tell; (3) Guided Practice; and (4) Follow-up to assure the trainee can perform all tasks up to required standards prior to being allowed to perform the tasks "solo."
D. Manages team member performance and supervises work. This includes:
1.Utilizing Coaching for Results, which includes:
- a.Activating team member behavior.
- (1)Providing guidance, direction, and reassurance to all team members.
- (2)Communicating non-negotiable standards of performance to team members.
- (3)Conducting team member meetings, group training sessions and Jump Start meetings.
- (4)Assigning Team members tasks from the Opening, Closing and Maintenance checklist.
- (5)Communicating job assignments for each shift to team members and assuring each team member works their assignment.
- (6)Giving instructions to team members that are clear and assure understanding.
- (7)Assigning team members to breaks.
- (8)Sending team members home early if not needed due to business conditions.
- (9)Calling team members in early, or calling extra team members to work to cover unanticipated surges in business volume.
- (10)Assuring all opening, shift, and closing job duties are completed and performed correctly.
- b.Evaluating team member behavior.
- (1)Observing team member performance each shift.
- (2)Working along side team members and assisting in the performance of their tasks, as needed.=
- (3)Monitoring team member meals and signing team member meal guest checks.
- (4)Ensuring adherence to alcoholic beverage laws of the local community
- (5)Conducting regular, written performance appraisals on all subordinates, using the procedure and forms provided by the Company and within the time specified in compensation plans.
- c.Responding to team member behavior with consequences.
- (1)Taking action (corrective or positive reinforcement) to assure team member performance meets or exceeds standards.
- (2)Providing ongoing counseling that gives praise and recognition to team members for jobs well done; identifies areas of performance needing improvement and methods for improving; and, if required, gives reprimands that are job focused.
2.Handling non-routine occurrences/emergencies and informing the RGM of such occurrences/emergencies.
E. Assists RGM with developing promotable team members in his/her restaurant and promotable management for Daland. This includes:
1. Using Company training programs and resources to prepare candidates for promotions and to assure that the management team is 100% certified in management processes, systems, policies, and procedures.
2. Making recommendations to the RGM regarding which team members are eligible for promotion to Shift Manager/Leader.
F. Assists RGM with personnel administration functions, which includes:
1. Assuring team members complete all required personnel documents such as W-4's, I-9's, Team member Acknowledgment, Arbitration Agreement, Delivery Driver Statement, New Driver Checklist, etc.; and, that these required documents are transmitted to the Home Office.
2. Documenting required payroll data for team members, including accurate recording of hours;
3. Managing worker's compensation claims, etc. in accordance with Company policies and procedures.
4. Maintaining personnel files on all team members, which includes filing all personnel documents; recording training dates, vacation dates, evaluation dates, pay increases, and absences; etc.
IV. MARKETING
A.Implements marketing programs to increase business. This includes:
1. Engaging in positive community/public relations for Pizza Hut.
2. Providing input for promotional ideas.
3. Displaying and maintaining Point of Purchase (P.O.P.) and other elements of national, co-op or local marketing programs;
4. Properly executing authorized marketing programs, including new product tests.
5. Taking initiative to recommend new opportunities for increasing business.
V. FACILITIES
A.Maintains a quality environment for our customers and team members. This includes:
1. Conducting routine Preventive Maintenance on the facility and equipment.
2. Taking corrective actions pursuant to the RGM’s safety inspections.
3. Advising the RGM regarding non-routine problems and following up to assure such problems are corrected.
4. Maintaining cleanliness and sanitation in all areas of the restaurant.
5. Organizing all work space to ensure ease of operation.
6. Providing a quality work environment that is safe and complies with all OSHA regulations.
7. Cleaning and organizing refrigeration units.
8. Ensuring floors are clean and free from obstruction.
9. Keeping HVAC vents and filters clean.
10. Ensuring trash is disposed of promptly and according to security procedures.
11. Ensuring parking lot and grounds are free of trash and debris and taking action to correct deficiencies.
12. Ensuring all equipment is used according to proper operational procedures.
13. Keeping restrooms cleaned and stocked.
14. Keeping food prep areas cleaned and sanitized according to approved procedures.
15. Ensuring the daily cleaning and maintenance of all equipment.
16. Correcting any unsafe conditions.
17. Following up to ensure all Scheduled Maintenance and Daily CM&A items are completed.
VI. ADMINISTRATION
A.Effectively manages time, allocating an appropriate amount to each Key Result Area.
B.Manages all paperwork, documentation, written reports, etc. and assures these are always submitted on time and that they are accurate, complete and organized.
C.If requested by the RGM, orders inventory items used in the restaurant. This involves these processes:
1. Review of the Inventory on Hand is performed. The Inventory on Hand is compared to the Weekly Ideal Usage, which is obtained from the Product Cost Analysis report, and a determination is made as to the amount of each particular item to order. The order is then recorded on an order sheet, or is entered into the computer for electronic transfer of order information.
2. Amount ordered of each item may be adjusted upward or downward based on projections of upcoming sales trends, coupon impact, weather changes or other extra-restaurant environmental changes.
3. Calls in orders for supplies on the phone, or electronically submits order via computer.
D.If requested by the RGM, conducts weekly inventory of all food, paper and beverage products used in the unit. This involves these processes:
1. Physically reviewing and counting the inventory on hand (which involves climbing shelves, bending, kneeling, etc.).
2. Rearranging inventory to assure proper rotation (first in, first out) and to make it easier to count and control.
3. Recording amounts of inventory on hand on the inventory form.
E.If requested by the RGM, prepares the weekly labor schedules. This involves these processes:
1. Updating Guest Check Comments file in the restaurant computer to assist in forecasting labor hours.
2. Reviewing Guest Check Comments file and upcoming promotions that may affect sales during the upcoming week.
3. Forecasting anticipated sales volume by shift, by day and by week. The forecast is based on knowledge of any outside events that may influence sales such as coupons, promotions, etc. Particular consideration must be given to how sales are generated--that is, dine-in business contrasted to carry-out business or delivery business.
4. Updating sales forecasts in the FMS (computer system) based on outside events that may influence sales.
5. Reviewing requests for days off that have been turned in by team members and when possible allowing for requested days off.
6. Using experience, past schedules, Black Book information, Guest Check Comments, knowledge of team members' abilities, labor goals, and FMS (computer system) recommended labor schedule to assist in scheduling the proper number of team members each shift to meet sales volume and labor hour guidelines.
7. Obtaining the RGM's approval of the schedule, then posting the final schedule in accordance with Daland Corporation's policies and procedures.
F.Performs daily accounting procedures. This includes these processes:
1. At close of business day requests a sales report from the FMS computer to determine total sales entered into the cash drawers throughout the system.
2. Any cash paidouts or miscellaneous deposits from the day are verified with what is in the system.
3. Cash on hand is counted and reconciled against total sales.
4. Total deposit is calculated, and a deposit is prepared.
5. Dough waste and PPP waste is documented and calculated on the form provided and filed for use in forecasting future prep levels.
6. All gift checks are counted and verified against prior counts less current gift check sales on the Gift Check Tracking form.
G.If requested by the RGM, performs weekly accounting procedures. This includes these processes:
1. Completing, as required, the Weekly Sales Analysis and analyzing it.
2. Completing the Weekly Inventory.
3. Completing the payroll functions.
4. Analyzing the Daily Business Summary Report to determine performance in key measurement areas.
5. Preparing the weekly packet for the home office, using the checklist provided to assure all required items are included.
6. Calling any needed FRS numbers or statistics to the District Manager.
H.Meets all deadlines and assures that subordinates meet their deadlines.
I.Manages all paperwork, documentation, written reports, etc. and assures these are always submitted on time and that they are accurate, complete and organized.
J.Maintains and updates required files, manuals, and reports.
NON-ESSENTIAL FUNCTIONS: The "non-essential" functions are routinely performed by the person holding the Shift Manager's position and they are essential to the effective operation of the restaurant. However, these functions are considered "non-essential" to the position. The Manager on Duty is then accountable for assuring the delegated functions are correctly performed.
A.Receives and stores inventory items used in the unit. This involves these processes:
1. Checking in products as received off delivery vehicles to verify product quality and that amount charged for on the delivery receipt/packing slip is correct when compared to amount received. Signing the delivery receipt/packing slips for amount of goods received.
2. Using a two-wheeled hand truck, assists and oversees other employees in proper storage of products. Weight of items varies. Generally, more than one person is available to perform this task.
3. Entering on inventory screen of the computer the amount and cost of each product item received as noted on the delivery receipt/packing slip.
MINIMUM QUALIFICATIONS/REQUIREMENTS: The following are the qualifications and minimum requirements necessary for a person to perform this job.
A.Ability to work a minimum of three (3) days and at least 30 hours per week, but must be available to work more than 30 hours per week if necessary due to business necessity. In addition to having the flexibility to work a variety of shifts, including late nights and weekends.
B.Valid driver's license, insurance and automobile. Position involves taking large amounts of cash receipts to the bank at different times of the day including at night. Banks are generally at a distance requiring a person to drive to the bank. Position may also need automobile to pick up product, make pizza deliveries, etc.
C.Able and willing to travel. Position requires occasional travel for training, new store openings and meetings, which may be held at a distance from home not feasible to drive daily. Overnight stays at an out-of-town location may be required during the training sessions, new store opening, and meetings for up to one week at a time.
D.Telephone (cellular or land line) at residence. There are circumstances that may arise at the restaurant of which the manager must be informed while off duty.
E.Sufficient physical agility to perform the functions of the position. This includes these processes:
1. Sufficient physical strength to lift most items used in the operation of the restaurant.
2. Sufficient communication skills. Position involves communicating with team members, superiors and customers.
3. Ability to move at a fairly quick pace and to remain stationary for periods of six to eight hours at a time. The position requires person to perform all of the above at different times and intervals as needed by the realities of the environment and the position.
F.Ability to maintain a state of self-composure under conditions of stress and anxiety. Position routinely involves stress resulting from work overload, role ambiguity, conflicting demands from various customers, and team members. Person in this position must be able to function effectively under these conditions.
G.Previous experience with this Company as a Shift Manager/Leader; or previous restaurant management experience with another Company.
H.Sufficient mental and cognitive ability to perform the calculations and fill in the sales and product tracking forms used by the Company. Estimate is that ability to read, write and perform arithmetic procedures at the 12th grade level will be sufficient.
I.Ability to perform all of the duties of the hourly team members and supervisors under this person's supervision. As time and circumstances dictate the person in this position may have to assist or take over the duties of an hourly team member in order to expedite good customer service. Also necessary in order to train new team members in this function.
J.Ability to communicate effectively with a large variety of persons with diverse backgrounds. Position is one where incumbent provides direction and supervision to a variety of subordinates with diverse levels of education, differences in ages, and experience. Must be able to express ideas and concepts to these persons to assure teamwork through organization and leadership.
EQUIPMENT USED:
Standard restaurant office equipment such as calculator, telephone, and computer.
"Pizza Wheel". This is a device with a handle and a round stainless steel blade that is used to cut certain types of pizza dough crusts.
"Rocker Knife". This is a device about two feet long with a stainless steel handle that extends across the top of a stainless steel blade fashioned in a curve. It is used to cut certain types of pizzas by placing on the pizza and rocking the blade across the pizza surface.
"Vegetable Chopper". This is a hand operated mechanical device used to slice whole raw vegetables into smaller pieces for use on the make table.
"Crock". A generic term used to describe a variety of containers used to hold food items served on a salad bar. Knives, spoons, spatulas and other common utensils.
"Make Table". An open topped, refrigerated, compartmented table for the storage of food items used in the preparation of products for customer orders. Has doors which allow access to interior refrigerated section below the table top where additional food items are stored as back-up for the items stored on top of the table.
"Cut Table". A stainless steel table where cooked pizzas are cut into slices and where other products are assembled prior to serving them to the customer.
"Oven". A power driven device operating at high temperatures used to bake food products.
"Automatic Dishwasher". A mechanical device consisting of: (1) a dirty dish/rinse table, used to rinse and prepare dishes for washing; (2) dishwasher compartment, where dishes are washed with hot water, soap, sanitizing chemical and pressurized water; and, (3) clean dish/drain table, where clean dishes drain, dry and are sorted for storage.
"Dough Proofer". A metal cabinet heated to approximately 95 degrees Fahrenheit, in which panned dough is placed to obtain the correct rise in the dough.
"Three Compartment Sink". A stainless steel sink, separated into three compartments used to wash, rinse and sanitize all kitchen tools, and smallwares not washed in the automatic dishwasher.
"Pan Gripper". This is a mechanical device used to grip certain types of pizza pans for purposes of lifting or carrying when they have been heated to a high temperature.
"Portion Cups". These are pre-measured cups used by Pizza Hut restaurants for portioning cheese and toppings for pizzas.
"Scales". This is a small table model scale used to weigh and portion ingredients used in the recipes of various products.
"Pan Separators". These are plastic items, of varying shape, diameter and circumference, used to separate pans filled with dough to protect the dough inside the pan from contamination and to allow pans to be stacked for storage.
"Dough Perforator". This is a mechanical device consisting of a handle attached to a small wheeled drum that is dotted with metal protrusions. It is used to perforate certain types of dough prior to topping to prevent formation of bubbles during baking.
"Cutting Board". This is a hard surface board, rectangular or square in shape, on which pizzas and other food products are cut.
"Reach In". A refrigerated piece of equipment with doors which open to allow dough or pizza ingredients to be stored inside for easy access.
"Scraper Block". A device with a stainless steel blade and a wooden handle in a rectangular shape used to cut dough for portioning, and scraping the make table/cut table surfaces off for cleaning.
"Prep Table". A table about 34 to 36 inches high, with a stainless steel top. The table is used as a work surface for the preparation of many ingredient items used in the Pizza Hut.
“Kitchen and Dining Utensils". Such as knives, spoons, spatulas, etc.
"Plates, Bowls, Mugs, Tumblers". and other items to serve food and beverages to customers.
"Spoon". A stainless steel device with a long handle and a curved end used for applying sauce to prepared dough.
"Pan". A round metal device with a raised edge for holding dough prior to topping and baking.
"Walk-in". A refrigerated compartment of sufficient size to allow the individual to actually walk into the refrigerated compartment to obtain or store perishable items. Compartment may be sufficiently cold to freeze items.
"Freezer". A refrigerated box maintained at sufficient cold temperatures so as to freeze items stored inside.
"Ice Machine". A device that automatically receives water, freezes it, and stores it as ice in an attached storage bin.
"Soda Dispenser" (pop machine). A device that mixes syrup and carbonated water and dispenses carbonated soft beverage (soda, pop).
"Point of Sale Computer". Electronic device used in tracking orders, inventory, payroll information. Contains cash drawer used to make change for customer transactions, track paidouts, delivery orders, dispatching.
"FMS" Field Management System. Software used on the point of sale computer that provides management information necessary in managing the day to day operations of the restaurant.
Miscellaneous equipment such as a telephone, carry-out boxes and bags, hand towels, etc.
Serving tray, ticket book, bus tub, flatware and other small items.
Note: Many restaurants have additional equipment such as beer boxes, spaghetti magic machine, etc.
PLACES WHERE WORK IS PERFORMED: This work is performed on the employer's premises. Location of premises may vary throughout the employer's Company. This job description was developed by observing the work in process and from information provided by the management of Daland Corporation.
permanent
P
Shift Manager - Urgently Hiring
Salary not disclosed
TITLE: Shift Manager (SM) PURPOSE OF THE POSITION: The person holding this supervisory position is considered a full time team member and is responsible and accountable for: the daily operation of the restaurant, assisting the RGM with hiring and training team members, directing the activities of team members, and rewarding or disciplining team members in consultation with the RGM; and, performing these functions in ways that assure compliance with all Company policies and procedures, customer satisfaction, a high level of team member morale and the attainment of sales and profit objectives.
The Shift Manager reports directly to the RGM, and holds the second highest position in the restaurant if there is not an Assistant Manager.
In restaurants with an Assistant Manager, the Shift Manager is the next highest position.
ESSENTIAL FUNCTIONS: The following accountabilities are essential to this position and a high degree of performance must be achieved in each in order for the incumbent to be successful.
These accountabilities are organized according to our six Key Result Areas.
When the word "policies" or the phrase "policies and procedures" or similar language is used in any of the Company's documents, the term refers to all policy and procedure bulletins, manuals, training materials, memoranda, newsletters, communications on the "Document Viewer" on the computer, and all other documents and oral discussions with team members' supervisors, which relate to the restaurant.
The management team shall be responsible for ensuring that all team members, including the manager himself/herself, comply with all Company policies and procedures and all Pizza Hut standards at all times and take immediate steps to correct actions not in accordance with such policies, procedures and standards.
I.
PROFITABILITY A.Planning 1.Executes the RGM's plans and overall Daland Corporation plans to achieve consistent sales growth and profit growth.
2.Achieves planned/budgeted profits, as communicated by the RGM.
This involves:
- a.Using established control systems and procedures to measure actual results and to identify deviations from planned results.
- b.Assisting the RGM, as requested, in developing and implementing corrective action plans to assure actual results conform to plan.
B.Policies: Complies with all Company policies and procedures, including but not limited to, those relating to inventory, cash, payroll, food handling, interactions with guests, team members, and vendors, and legal compliance.
C.Manages and Controls Cash: In conjunction with the RGM and other managers, ensures that that all cash and checks, minus the change fund is correctly deposited, credit card transactions are correctly settled, and cash over or short is minimized.
1.
Performs Banking Transactions
- a.
Assures that two deposits daily are prepared and deposited in the bank (more than two may be required in higher volume units.)
- i.
The intent of the first deposit is to remove from the unit an amount approximately equal to the total of cash plus checks, minus the amount of the change fund.
- ii.
The first deposit is to be made after 4:00 p.m., when the opening manager is ready to leave for the day.
- iii.
The final deposit will be all remaining cash plus checks, minus the change fund.
- iv.
The managers may take such deposits to the bank, using his/her personal vehicle, and depending on the time of day, make the deposit in the bank lobby or in the night depository.
- v.
Assure the "Weekly Deposit Log" is completed for each deposit made.
- b.
If requested by the RGM, the other managers shall perform the following tasks.
These are the responsibility of the RGM, but may be delegated to other managers.
- i.
Picks up validated deposit slips at the bank.
- ii.
Verifies bank validated deposit amounts to sales and cash reports as well as the "Weekly Deposit Log," and assures all appropriate signatures are on the "Weekly Deposit Log".
- iii.
Sends a copy of the "Weekly Deposit Log" to the Home Office with all other weekly paperwork.
D.Controls cash drawers and team member "banks", following all established manual and computer procedures.
1.
Establishes the correct number of cash drawers.
Number of cash drawers in use at one time may vary from one to four depending on size of the restaurant, sales volume, method of delivering services to customer.
Amount of cash in each drawer is recorded and kept in the drawer for the duration of the shift, or until "dropped" from the cash drawer to the safe.
2.
Establishes cash banks for delivery drivers.
3.
As needed, will operate cash drawer following established procedures for cash drawer operation.
4.
As necessary, money is removed from cash drawers from time to time and secured in the safe.
5.
Throughout the shift, cash drawer transactions, such as paid outs, miscellaneous receipts (paid ins), discounts and promotions are properly accounted for, including all documentation; transactions are properly entered into the computer; and, all documentation is organized and secured for transmitting to the Home Office.
6.
Assures cash drawers are counted and balanced at the end of each shift or when there is a change in cashiers.
7.
Records tips for servers and drivers on credit card/gift card transactions and correctly settles all credit card/gift card transactions.
8.
Inform the RGM anytime cash short exceeds $5 for a day.
9.
Reviews reports and otherwise takes actions to ensure that team members properly report actual sales and actual tips, and ensures that team members do not falsify credit card receipts or other Company documents.
This requires due diligence on the part of the managers.
E.Assists the RGM in Managing and Controlling Cost of Sales: The actual cost per the P&L must be equal to or between Ideal Cost and Allowable Cost as calculated in the Product Cost Analysis report and Bonus Calculation Sheet.
This includes these processes: 1.Utilizes manuals and/or automated procedures approved by the Company, orders all approved products used in the restaurant.
2.Properly accepts deliveries and properly stores inventory items used in the restaurant.
This involves these processes:
- a.Checks in products as received off of delivery vehicles to verity product quality and verifies that amounts charged for on delivery receipt/packing slips are for amount of goods received.
- b.Uses a two-wheeled hand truck to unload and products, assists and oversees other team members in proper storage of products.
Weight of items varies from 10 to 50 pounds.
Full load on two-wheeled hand truck may exceed 500 pounds.
Generally, ensures that more than one person is available to perform this task.
- c."Autoposts" inventory received, or enters on inventory record the amount and cost of each product item received, as noted on delivery receipt/packing slip.
3.Accurately accounts for all product coming into the restaurant, used to prepare products, or transferred out of the restaurant.
4.Assures the proper execution of all recipes and specifications for preparing ingredients and assembling products.
5.Manages waste which involves maintaining a FIFO (First In, First Out) system and marking all products with a Made
- Ready
- Discard label.
6.Assures the correct order entry procedures are followed by all order takers.
7.Assures compliance with team member consumption policies.
8.Performs a Daily Product Usage Analysis on critical inventory items to assure usage meets guidelines.
9.Communicates goals to team members and follows up with team members to ensure goals are being met.
10.The following tools are used to aid in controlling Cost of Sales:
- FMS Product Cost Analysis Report
- FMS Daily Ideal Usage Report
- FMS Weekly Worksheet Report
- Bonus Calculation Sheet
- Profit and Loss Statement
- The General Ledger
- Prep Variance Report
- Daily Prep Variance Report F.Assists the RGM in Managing and Controlling Cost of Labor: Ensures that "Flow-thru" targets/goals are achieved; actual hours used do not exceed the established labor model/matrix; and, team member productivity is maximized.
This includes these processes:.
1.Ensuring the accuracy and completeness of team member timekeeping records, including tips and team member meals.
Updates team member records as needed.
2.
Minimizing edits to clock-in/clock-out transactions by assuring team members properly clock in at the beginning of their shift and clock out at the end of their shift.
3.
Assuring team members do not clock in earlier than five (5) minutes prior to their scheduled shift.
4.
Assuring the man-hours used for opening and closing the restaurant do not exceed established targets.
5.Analyzing actual labor hours used versus earned allowable labor hours and calculating the variance; and, using this information to appropriately manage labor each shift.
6.Communicating and cooperating with the Home Office Payroll Department to assure accuracy in payroll, including information about new hires, raises, promotions, and terminations.
7.Making appropriate recommendations to the RGM regarding wages within Company guidelines.
8.Eliminating overtime hours for team members who are paid on an hourly basis.
9.Eliminating supplemental tip credit pay.
10.Improving team member productivity using the measurements and tools available through the Company, as well as the following:
- Assuring the Back of the House (BOH) is "optimized":
- i.
Organized … a place for everything, and everything in its place
- ii.
Lineal Flow … eliminate or minimize back tracking
- iii.
Have all items located closest to the next step in the product assembly process
- iv.
Minimize the number of steps taken and the reach needed for all items
- Assuring that team members are thoroughly trained.
- Ensuring that "prep levels' are adequate for the forecasted volume of business for the day, including: products thawing/tempering; raw product prep; preassembled pizza and other products; and so on.
- Ensuring that food preparation areas, make table, cut table, and service areas are stocked appropriately before each shift and maintained during peak volume periods.
- Ensuring products are prepared quickly in accordance with time standards.
- Ensuring that tables vacated by customers are cleared, cleaned, sanitized and reset quickly.
11.
Reduces turnover by managing all aspects of the restaurant professionally and in accordance with Company standards.
12.
If the RGM has delegated scheduling to the Shift Manager, the Shift Manager uses established procedures to produce a sales forecast to be used in the scheduling process.
G.Managing Other Operating Expenses and Semi-Variable Expenses to Budget or less.
II.
CUSTOMER SATISFACTION A.Maintains positive customer relations, which includes: 1.
Assuring personal behaviors and team member behaviors toward all customers are courteous, attentive, respectful, and enthusiastic.
2.
Assuring a comfortable environment for customers.
3.
Executing "Floor Management" by directing activities and greeting and interacting with customers on each shift worked.
4.
Immediately resolving customer complaints by apologizing first and then assuring the satisfaction of the customer.
Complaints may be received in person, by phone, or in writing.
Consult with the RGM if the customer is not satisfied with your suggested resolution.
- a.
B.L.A.S.T.
is the acronym we use for our complaint resolution process:
- Believe the customer
- Listen to the customer
- Apologize to the customer
- Satisfy the customer
- Thank the customer 5.
Immediately contacting the RGM (or DM if the RGM is not available immediately) regarding any incidents in which customers are injured or in which customers claim some harm done to them.
B.
Ensures customers receive prompt, quality service.
This includes: 1.
If the RGM has delegated scheduling to the Shift Manager, scheduling the correct number of team members for forecast sales volume; and deploying those Team members in the correct job roles.
2.
Following established service guidelines and procedures to assure all Hospitality Standards are achieved.
3.
Directing team member activities to assure speed of service standards are met or exceeded, including product preparation times and delivery times.
4.
Personally serving customers as required to meet the demand of the volume of business.
5.
Ensuring customers are greeted properly and seated as quickly as appropriate.
6.
Recognizing and dealing effectively with the special needs of customers.
7.
Ensuring that customer orders are taken promptly, prepared accurately, and served quickly.
8.
Ensuring customer follow-up, which means servers check back with customers frequently to see if there is anything else needed.
9.
Ensuring immediate attention is given to customers ready to pay, either by prompting servers to complete the table cashout procedure or by performing the transaction of cashing out customer as needed.
10.
Ensuring the phone is answered promptly and courteously, following the Telephone Service Essentials.
11.
Responding to customers at pickup counter and drive-thru window; finding order; collecting money for the order; verifying order to customer; and, thanking customers.
12.
Dispatching orders for delivery customers as required to meet the demands of the volume of business, grouping orders by geographical destination and instructing drivers as they arrive and depart which orders to take with them and where to go.
13.
Delivering pizzas as necessary to meet the demands of the business.
14.
Ensuring customers are thanked for their business.
C.Ensures quality ingredients are used to prepare all products.
This includes: 1.
Maintaining Food Safe Temperatures for all ingredients and products.
2.
Ensuring food preparation utensils and food contact surfaces are property cleaned and sanitized.
3.
Ensuring that procedures for receiving, handling and storing ingredients are followed.
4.
Recognizing and correcting any raw ingredients or product problems.
5.
Maintaining inventory levels which assure product freshness and no outages.
6.
Eliminating the potential for cross contamination.
7.
Ensuring that proper procedures are followed to prepare ingredients (dough, sauces, meats, cheeses, and vegetables).
8.
Ensuring salad bar is maintained according to standards of operation (restaurant only).
9.
Personally preparing ingredients as necessary.
D.
Ensures quality products, which includes: 1.
Planning dough, ingredient and product preparation to meet sales volumes and personally preparing these items, as necessary, to meet the demand of the business.
2.
If deemed appropriate by the RGM, performing a product cookability test to verify proper oven and belt speed.
3.
Following proper procedures to process customer orders.
4.
Personally preparing and cooking menu items as required to meet the demands of the volume of business.
5.
Taking every appropriate action, in consultation with the RGM, including driving to another restaurant to pick up product, to resolve outage or potential outage situations.
6.
Maintaining inventory levels which assure product freshness and no outages.
7.
Planning dough, ingredient and product preparation to meet sales volumes and personally preparing these items, as necessary, to meet the demand of the business.
8.
Assuring all products are prepared according to exact specifications, recipes and procedures.
9.
Personally preparing and cooking menu items as required to meet the demands of the volume of business.
E.Ensures that all standards for cleanliness and sanitation are met or exceeded, with particular attention to: 1.
Restrooms.
2.
Table tops; booth backs and seats; and chair seats.
3.
Silverware, plateware, and glassware.
4.
Dining room floors.
5.
Salad bar.
F.Implements new or approved changes in policies, procedures and/or operation standards.
This involves: 1.
Attending training sessions.
2.
Reading "Rollout Guides" or other resources.
3.
Assisting the RGM with training restaurant team members of new procedures or changes.
4.
Participating in crew training and other actions in the restaurant to assure full and correct implementation.
5.
If requested by the RGM, assisting with updating all manuals, resources and job aids as required.
III.PEOPLE A.Maintains positive team member relations and a positive and productive workplace, which involves: 1.
Building relationships with team members based on mutual trust and respect.
2.
Communicating and following the Daland "5 Star" Vision and Core Beliefs.
3.
Promoting teamwork.
4.
Being familiar with benefits available to team members, and referring appropriate questions to the RGM regarding these benefits.
5.
Informing the RGM of all team member grievances.
6.
Performing correct and consistent administration of team member disciplinary procedures, and discussing all recommended discipline with the RGM.
7.
Assuring compliance with various governmental regulations, such as ensuring that all team members are clocked in while working, complying with overtime laws, child labor laws, alcoholic beverage laws, anti-discrimination and anti-harassment laws, FLSA, EEO, etc.
8.
Performing consistent administration of and compliance with Company policies and procedures.
9.
Communicating effectively with the crew and management team.
10.
Assuring team member understanding of the Daland Corporation organization structure and career opportunities within the Company.
B.
Assists the RGM with managing the size and quality of staff.
The following are responsibilities of the RGM, but if requested by the RGM, the Shift Manager may assist with the following: 1.
Planning, recruiting, and hiring to assure a full staff at all times and to assure adequate time for processing MVR's (motor vehicle reports), background checks, etc.
Only the RGM is authorized to hire new team members; and Shift Managers are only permitted to interview applicants if authorized by the RGM.
2.
Continuously recruiting and taking applications from job candidates.
3.
If requested by the RGM, utilizing staffing tools, such as the Pizza Hut Hiring Zone and the team member Assessment; interviewing job candidates; and, checking their references.
4.
If requested by the RGM, making recommendations to the RGM regarding the best qualified candidates.
5.
Complying with Company employment practices and governmental regulations, including EEO, ADA Title I, etc.
C.Assisting the RGM in training newly hired team members and team members preparing for promotions.
This involves: 1.
Following Company training policies and meeting Pizza Hut Training Standards.
2.
Utilizing on-line training, trainer's guides, checklists, job aids, tests and other training resources to assure a thorough job of training.
3.
Using the four step training process of: (1) Preparation (2) Show & Tell; (3) Guided Practice; and (4) Follow-up to assure the trainee can perform all tasks up to required standards prior to being allowed to perform the tasks "solo." D.
Manages team member performance and supervises work.
This includes: 1.Utilizing Coaching for Results, which includes:
- a.Activating team member behavior.
- (1)Providing guidance, direction, and reassurance to all team members.
- (2)Communicating non-negotiable standards of performance to team members.
- (3)Conducting team member meetings, group training sessions and Jump Start meetings.
- (4)Assigning Team members tasks from the Opening, Closing and Maintenance checklist.
- (5)Communicating job assignments for each shift to team members and assuring each team member works their assignment.
- (6)Giving instructions to team members that are clear and assure understanding.
- (7)Assigning team members to breaks.
- (8)Sending team members home early if not needed due to business conditions.
- (9)Calling team members in early, or calling extra team members to work to cover unanticipated surges in business volume.
- (10)Assuring all opening, shift, and closing job duties are completed and performed correctly.
- b.Evaluating team member behavior.
- (1)Observing team member performance each shift.
- (2)Working along side team members and assisting in the performance of their tasks, as needed.=
- (3)Monitoring team member meals and signing team member meal guest checks.
- (4)Ensuring adherence to alcoholic beverage laws of the local community
- (5)Conducting regular, written performance appraisals on all subordinates, using the procedure and forms provided by the Company and within the time specified in compensation plans.
- c.Responding to team member behavior with consequences.
- (1)Taking action (corrective or positive reinforcement) to assure team member performance meets or exceeds standards.
- (2)Providing ongoing counseling that gives praise and recognition to team members for jobs well done; identifies areas of performance needing improvement and methods for improving; and, if required, gives reprimands that are job focused.
2.Handling non-routine occurrences/emergencies and informing the RGM of such occurrences/emergencies.
E.
Assists RGM with developing promotable team members in his/her restaurant and promotable management for Daland.
This includes: 1.
Using Company training programs and resources to prepare candidates for promotions and to assure that the management team is 100% certified in management processes, systems, policies, and procedures.
2.
Making recommendations to the RGM regarding which team members are eligible for promotion to Shift Manager/Leader.
F.
Assists RGM with personnel administration functions, which includes: 1.
Assuring team members complete all required personnel documents such as W-4's, I-9's, Team member Acknowledgment, Arbitration Agreement, Delivery Driver Statement, New Driver Checklist, etc.; and, that these required documents are transmitted to the Home Office.
2.
Documenting required payroll data for team members, including accurate recording of hours; 3.
Managing worker's compensation claims, etc.
in accordance with Company policies and procedures.
4.
Maintaining personnel files on all team members, which includes filing all personnel documents; recording training dates, vacation dates, evaluation dates, pay increases, and absences; etc.
IV.
MARKETING A.Implements marketing programs to increase business.
This includes: 1.
Engaging in positive community/public relations for Pizza Hut.
2.
Providing input for promotional ideas.
3.
Displaying and maintaining Point of Purchase (P.O.P.) and other elements of national, co-op or local marketing programs; 4.
Properly executing authorized marketing programs, including new product tests.
5.
Taking initiative to recommend new opportunities for increasing business.
V.
FACILITIES A.Maintains a quality environment for our customers and team members.
This includes: 1.
Conducting routine Preventive Maintenance on the facility and equipment.
2.
Taking corrective actions pursuant to the RGM's safety inspections.
3.
Advising the RGM regarding non-routine problems and following up to assure such problems are corrected.
4.
Maintaining cleanliness and sanitation in all areas of the restaurant.
5.
Organizing all work space to ensure ease of operation.
6.
Providing a quality work environment that is safe and complies with all OSHA regulations.
7.
Cleaning and organizing refrigeration units.
8.
Ensuring floors are clean and free from obstruction.
9.
Keeping HVAC vents and filters clean.
10.
Ensuring trash is disposed of promptly and according to security procedures.
11.
Ensuring parking lot and grounds are free of trash and debris and taking action to correct deficiencies.
12.
Ensuring all equipment is used according to proper operational procedures.
13.
Keeping restrooms cleaned and stocked.
14.
Keeping food prep areas cleaned and sanitized according to approved procedures.
15.
Ensuring the daily cleaning and maintenance of all equipment.
16.
Correcting any unsafe conditions.
17.
Following up to ensure all Scheduled Maintenance and Daily CM&A items are completed.
VI.
ADMINISTRATION A.Effectively manages time, allocating an appropriate amount to each Key Result Area.
B.Manages all paperwork, documentation, written reports, etc.
and assures these are always submitted on time and that they are accurate, complete and organized.
C.If requested by the RGM, orders inventory items used in the restaurant.
This involves these processes: 1.
Review of the Inventory on Hand is performed.
The Inventory on Hand is compared to the Weekly Ideal Usage, which is obtained from the Product Cost Analysis report, and a determination is made as to the amount of each particular item to order.
The order is then recorded on an order sheet, or is entered into the computer for electronic transfer of order information.
2.
Amount ordered of each item may be adjusted upward or downward based on projections of upcoming sales trends, coupon impact, weather changes or other extra-restaurant environmental changes.
3.
Calls in orders for supplies on the phone, or electronically submits order via computer.
D.If requested by the RGM, conducts weekly inventory of all food, paper and beverage products used in the unit.
This involves these processes: 1.
Physically reviewing and counting the inventory on hand (which involves climbing shelves, bending, kneeling, etc.).
2.
Rearranging inventory to assure proper rotation (first in, first out) and to make it easier to count and control.
3.
Recording amounts of inventory on hand on the inventory form.
E.If requested by the RGM, prepares the weekly labor schedules.
This involves these processes: 1.
Updating Guest Check Comments file in the restaurant computer to assist in forecasting labor hours.
2.
Reviewing Guest Check Comments file and upcoming promotions that may affect sales during the upcoming week.
3.
Forecasting anticipated sales volume by shift, by day and by week.
The forecast is based on knowledge of any outside events that may influence sales such as coupons, promotions, etc.
Particular consideration must be given to how sales are generated--that is, dine-in business contrasted to carry-out business or delivery business.
4.
Updating sales forecasts in the FMS (computer system) based on outside events that may influence sales.
5.
Reviewing requests for days off that have been turned in by team members and when possible allowing for requested days off.
6.
Using experience, past schedules, Black Book information, Guest Check Comments, knowledge of team members' abilities, labor goals, and FMS (computer system) recommended labor schedule to assist in scheduling the proper number of team members each shift to meet sales volume and labor hour guidelines.
7.
Obtaining the RGM's approval of the schedule, then posting the final schedule in accordance with Daland Corporation's policies and procedures.
F.Performs daily accounting procedures.
This includes these processes: 1.
At close of business day requests a sales report from the FMS computer to determine total sales entered into the cash drawers throughout the system.
2.
Any cash paidouts or miscellaneous deposits from the day are verified with what is in the system.
3.
Cash on hand is counted and reconciled against total sales.
4.
Total deposit is calculated, and a deposit is prepared.
5.
Dough waste and PPP waste is documented and calculated on the form provided and filed for use in forecasting future prep levels.
6.
All gift checks are counted and verified against prior counts less current gift check sales on the Gift Check Tracking form.
G.If requested by the RGM, performs weekly accounting procedures.
This includes these processes: 1.
Completing, as required, the Weekly Sales Analysis and analyzing it.
2.
Completing the Weekly Inventory.
3.
Completing the payroll functions.
4.
Analyzing the Daily Business Summary Report to determine performance in key measurement areas.
5.
Preparing the weekly packet for the home office, using the checklist provided to assure all required items are included.
6.
Calling any needed FRS numbers or statistics to the District Manager.
H.Meets all deadlines and assures that subordinates meet their deadlines.
I.Manages all paperwork, documentation, written reports, etc.
and assures these are always submitted on time and that they are accurate, complete and organized.
J.Maintains and updates required files, manuals, and reports.
NON-ESSENTIAL FUNCTIONS: The "non-essential" functions are routinely performed by the person holding the Shift Manager's position and they are essential to the effective operation of the restaurant.
However, these functions are considered "non-essential" to the position.
The Manager on Duty is then accountable for assuring the delegated functions are correctly performed.
A.Receives and stores inventory items used in the unit.
This involves these processes: 1.
Checking in products as received off delivery vehicles to verify product quality and that amount charged for on the delivery receipt/packing slip is correct when compared to amount received.
Signing the delivery receipt/packing slips for amount of goods received.
2.
Using a two-wheeled hand truck, assists and oversees other employees in proper storage of products.
Weight of items varies.
Generally, more than one person is available to perform this task.
3.
Entering on inventory screen of the computer the amount and cost of each product item received as noted on the delivery receipt/packing slip.
MINIMUM QUALIFICATIONS/REQUIREMENTS: The following are the qualifications and minimum requirements necessary for a person to perform this job.
A.Ability to work a minimum of three (3) days and at least 30 hours per week, but must be available to work more than 30 hours per week if necessary due to business necessity.
In addition to having the flexibility to work a variety of shifts, including late nights and weekends.
B.Valid driver's license, insurance and automobile.
Position involves taking large amounts of cash receipts to the bank at different times of the day including at night.
Banks are generally at a distance requiring a person to drive to the bank.
Position may also need automobile to pick up product, make pizza deliveries, etc.
C.Able and willing to travel.
Position requires occasional travel for training, new store openings and meetings, which may be held at a distance from home not feasible to drive daily.
Overnight stays at an out-of-town location may be required during the training sessions, new store opening, and meetings for up to one week at a time.
D.Telephone (cellular or land line) at residence.
There are circumstances that may arise at the restaurant of which the manager must be informed while off duty.
E.Sufficient physical agility to perform the functions of the position.
This includes these processes: 1.
Sufficient physical strength to lift most items used in the operation of the restaurant.
2.
Sufficient communication skills.
Position involves communicating with team members, superiors and customers.
3.
Ability to move at a fairly quick pace and to remain stationary for periods of six to eight hours at a time.
The position requires person to perform all of the above at different times and intervals as needed by the realities of the environment and the position.
F.Ability to maintain a state of self-composure under conditions of stress and anxiety.
Position routinely involves stress resulting from work overload, role ambiguity, conflicting demands from various customers, and team members.
Person in this position must be able to function effectively under these conditions.
G.Previous experience with this Company as a Shift Manager/Leader; or previous restaurant management experience with another Company.
H.Sufficient mental and cognitive ability to perform the calculations and fill in the sales and product tracking forms used by the Company.
Estimate is that ability to read, write and perform arithmetic procedures at the 12th grade level will be sufficient.
I.Ability to perform all of the duties of the hourly team members and supervisors under this person's supervision.
As time and circumstances dictate the person in this position may have to assist or take over the duties of an hourly team member in order to expedite good customer service.
Also necessary in order to train new team members in this function.
J.Ability to communicate effectively with a large variety of persons with diverse backgrounds.
Position is one where incumbent provides direction and supervision to a variety of subordinates with diverse levels of education, differences in ages, and experience.
Must be able to express ideas and concepts to these persons to assure teamwork through organization and leadership.
EQUIPMENT USED: Standard restaurant office equipment such as calculator, telephone, and computer.
"Pizza Wheel".
This is a device with a handle and a round stainless steel blade that is used to cut certain types of pizza dough crusts.
"Rocker Knife".
This is a device about two feet long with a stainless steel handle that extends across the top of a stainless steel blade fashioned in a curve.
It is used to cut certain types of pizzas by placing on the pizza and rocking the blade across the pizza surface.
"Vegetable Chopper".
This is a hand operated mechanical device used to slice whole raw vegetables into smaller pieces for use on the make table.
"Crock".
A generic term used to describe a variety of containers used to hold food items served on a salad bar.
Knives, spoons, spatulas and other common utensils.
"Make Table".
An open topped, refrigerated, compartmented table for the storage of food items used in the preparation of products for customer orders.
Has doors which allow access to interior refrigerated section below the table top where additional food items are stored as back-up for the items stored on top of the table.
"Cut Table".
A stainless steel table where cooked pizzas are cut into slices and where other products are assembled prior to serving them to the customer.
"Oven".
A power driven device operating at high temperatures used to bake food products.
"Automatic Dishwasher".
A mechanical device consisting of: (1) a dirty dish/rinse table, used to rinse and prepare dishes for washing; (2) dishwasher compartment, where dishes are washed with hot water, soap, sanitizing chemical and pressurized water; and, (3) clean dish/drain table, where clean dishes drain, dry and are sorted for storage.
"Dough Proofer".
A metal cabinet heated to approximately 95 degrees Fahrenheit, in which panned dough is placed to obtain the correct rise in the dough.
"Three Compartment Sink".
A stainless steel sink, separated into three compartments used to wash, rinse and sanitize all kitchen tools, and smallwares not washed in the automatic dishwasher.
"Pan Gripper".
This is a mechanical device used to grip certain types of pizza pans for purposes of lifting or carrying when they have been heated to a high temperature.
"Portion Cups".
These are pre-measured cups used by Pizza Hut restaurants for portioning cheese and toppings for pizzas.
"Scales".
This is a small table model scale used to weigh and portion ingredients used in the recipes of various products.
"Pan Separators".
These are plastic items, of varying shape, diameter and circumference, used to separate pans filled with dough to protect the dough inside the pan from contamination and to allow pans to be stacked for storage.
"Dough Perforator".
This is a mechanical device consisting of a handle attached to a small wheeled drum that is dotted with metal protrusions.
It is used to perforate certain types of dough prior to topping to prevent formation of bubbles during baking.
"Cutting Board".
This is a hard surface board, rectangular or square in shape, on which pizzas and other food products are cut.
"Reach In".
A refrigerated piece of equipment with doors which open to allow dough or pizza ingredients to be stored inside for easy access.
"Scraper Block".
A device with a stainless steel blade and a wooden handle in a rectangular shape used to cut dough for portioning, and scraping the make table/cut table surfaces off for cleaning.
"Prep Table".
A table about 34 to 36 inches high, with a stainless steel top.
The table is used as a work surface for the preparation of many ingredient items used in the Pizza Hut.
"Kitchen and Dining Utensils".
Such as knives, spoons, spatulas, etc.
"Plates, Bowls, Mugs, Tumblers".
and other items to serve food and beverages to customers.
"Spoon".
A stainless steel device with a long handle and a curved end used for applying sauce to prepared dough.
"Pan".
A round metal device with a raised edge for holding dough prior to topping and baking.
"Walk-in".
A refrigerated compartment of sufficient size to allow the individual to actually walk into the refrigerated compartment to obtain or store perishable items.
Compartment may be sufficiently cold to freeze items.
"Freezer".
A refrigerated box maintained at sufficient cold temperatures so as to freeze items stored inside.
"Ice Machine".
A device that automatically receives water, freezes it, and stores it as ice in an attached storage bin.
"Soda Dispenser" (pop machine).
A device that mixes syrup and carbonated water and dispenses carbonated soft beverage (soda, pop).
"Point of Sale Computer".
Electronic device used in tracking orders, inventory, payroll information.
Contains cash drawer used to make change for customer transactions, track paidouts, delivery orders, dispatching.
"FMS" Field Management System.
Software used on the point of sale computer that provides management information necessary in managing the day to day operations of the restaurant.
Miscellaneous equipment such as a telephone, carry-out boxes and bags, hand towels, etc.
Serving tray, ticket book, bus tub, flatware and other small items.
Note: Many restaurants have additional equipment such as beer boxes, spaghetti magic machine, etc.
PLACES WHERE WORK IS PERFORMED: This work is performed on the employer's premises.
Location of premises may vary throughout the employer's Company.
This job description was developed by observing the work in process and from information provided by the management of Daland Corporation.
The Shift Manager reports directly to the RGM, and holds the second highest position in the restaurant if there is not an Assistant Manager.
In restaurants with an Assistant Manager, the Shift Manager is the next highest position.
ESSENTIAL FUNCTIONS: The following accountabilities are essential to this position and a high degree of performance must be achieved in each in order for the incumbent to be successful.
These accountabilities are organized according to our six Key Result Areas.
When the word "policies" or the phrase "policies and procedures" or similar language is used in any of the Company's documents, the term refers to all policy and procedure bulletins, manuals, training materials, memoranda, newsletters, communications on the "Document Viewer" on the computer, and all other documents and oral discussions with team members' supervisors, which relate to the restaurant.
The management team shall be responsible for ensuring that all team members, including the manager himself/herself, comply with all Company policies and procedures and all Pizza Hut standards at all times and take immediate steps to correct actions not in accordance with such policies, procedures and standards.
I.
PROFITABILITY A.Planning 1.Executes the RGM's plans and overall Daland Corporation plans to achieve consistent sales growth and profit growth.
2.Achieves planned/budgeted profits, as communicated by the RGM.
This involves:
- a.Using established control systems and procedures to measure actual results and to identify deviations from planned results.
- b.Assisting the RGM, as requested, in developing and implementing corrective action plans to assure actual results conform to plan.
B.Policies: Complies with all Company policies and procedures, including but not limited to, those relating to inventory, cash, payroll, food handling, interactions with guests, team members, and vendors, and legal compliance.
C.Manages and Controls Cash: In conjunction with the RGM and other managers, ensures that that all cash and checks, minus the change fund is correctly deposited, credit card transactions are correctly settled, and cash over or short is minimized.
1.
Performs Banking Transactions
- a.
Assures that two deposits daily are prepared and deposited in the bank (more than two may be required in higher volume units.)
- i.
The intent of the first deposit is to remove from the unit an amount approximately equal to the total of cash plus checks, minus the amount of the change fund.
- ii.
The first deposit is to be made after 4:00 p.m., when the opening manager is ready to leave for the day.
- iii.
The final deposit will be all remaining cash plus checks, minus the change fund.
- iv.
The managers may take such deposits to the bank, using his/her personal vehicle, and depending on the time of day, make the deposit in the bank lobby or in the night depository.
- v.
Assure the "Weekly Deposit Log" is completed for each deposit made.
- b.
If requested by the RGM, the other managers shall perform the following tasks.
These are the responsibility of the RGM, but may be delegated to other managers.
- i.
Picks up validated deposit slips at the bank.
- ii.
Verifies bank validated deposit amounts to sales and cash reports as well as the "Weekly Deposit Log," and assures all appropriate signatures are on the "Weekly Deposit Log".
- iii.
Sends a copy of the "Weekly Deposit Log" to the Home Office with all other weekly paperwork.
D.Controls cash drawers and team member "banks", following all established manual and computer procedures.
1.
Establishes the correct number of cash drawers.
Number of cash drawers in use at one time may vary from one to four depending on size of the restaurant, sales volume, method of delivering services to customer.
Amount of cash in each drawer is recorded and kept in the drawer for the duration of the shift, or until "dropped" from the cash drawer to the safe.
2.
Establishes cash banks for delivery drivers.
3.
As needed, will operate cash drawer following established procedures for cash drawer operation.
4.
As necessary, money is removed from cash drawers from time to time and secured in the safe.
5.
Throughout the shift, cash drawer transactions, such as paid outs, miscellaneous receipts (paid ins), discounts and promotions are properly accounted for, including all documentation; transactions are properly entered into the computer; and, all documentation is organized and secured for transmitting to the Home Office.
6.
Assures cash drawers are counted and balanced at the end of each shift or when there is a change in cashiers.
7.
Records tips for servers and drivers on credit card/gift card transactions and correctly settles all credit card/gift card transactions.
8.
Inform the RGM anytime cash short exceeds $5 for a day.
9.
Reviews reports and otherwise takes actions to ensure that team members properly report actual sales and actual tips, and ensures that team members do not falsify credit card receipts or other Company documents.
This requires due diligence on the part of the managers.
E.Assists the RGM in Managing and Controlling Cost of Sales: The actual cost per the P&L must be equal to or between Ideal Cost and Allowable Cost as calculated in the Product Cost Analysis report and Bonus Calculation Sheet.
This includes these processes: 1.Utilizes manuals and/or automated procedures approved by the Company, orders all approved products used in the restaurant.
2.Properly accepts deliveries and properly stores inventory items used in the restaurant.
This involves these processes:
- a.Checks in products as received off of delivery vehicles to verity product quality and verifies that amounts charged for on delivery receipt/packing slips are for amount of goods received.
- b.Uses a two-wheeled hand truck to unload and products, assists and oversees other team members in proper storage of products.
Weight of items varies from 10 to 50 pounds.
Full load on two-wheeled hand truck may exceed 500 pounds.
Generally, ensures that more than one person is available to perform this task.
- c."Autoposts" inventory received, or enters on inventory record the amount and cost of each product item received, as noted on delivery receipt/packing slip.
3.Accurately accounts for all product coming into the restaurant, used to prepare products, or transferred out of the restaurant.
4.Assures the proper execution of all recipes and specifications for preparing ingredients and assembling products.
5.Manages waste which involves maintaining a FIFO (First In, First Out) system and marking all products with a Made
- Ready
- Discard label.
6.Assures the correct order entry procedures are followed by all order takers.
7.Assures compliance with team member consumption policies.
8.Performs a Daily Product Usage Analysis on critical inventory items to assure usage meets guidelines.
9.Communicates goals to team members and follows up with team members to ensure goals are being met.
10.The following tools are used to aid in controlling Cost of Sales:
- FMS Product Cost Analysis Report
- FMS Daily Ideal Usage Report
- FMS Weekly Worksheet Report
- Bonus Calculation Sheet
- Profit and Loss Statement
- The General Ledger
- Prep Variance Report
- Daily Prep Variance Report F.Assists the RGM in Managing and Controlling Cost of Labor: Ensures that "Flow-thru" targets/goals are achieved; actual hours used do not exceed the established labor model/matrix; and, team member productivity is maximized.
This includes these processes:.
1.Ensuring the accuracy and completeness of team member timekeeping records, including tips and team member meals.
Updates team member records as needed.
2.
Minimizing edits to clock-in/clock-out transactions by assuring team members properly clock in at the beginning of their shift and clock out at the end of their shift.
3.
Assuring team members do not clock in earlier than five (5) minutes prior to their scheduled shift.
4.
Assuring the man-hours used for opening and closing the restaurant do not exceed established targets.
5.Analyzing actual labor hours used versus earned allowable labor hours and calculating the variance; and, using this information to appropriately manage labor each shift.
6.Communicating and cooperating with the Home Office Payroll Department to assure accuracy in payroll, including information about new hires, raises, promotions, and terminations.
7.Making appropriate recommendations to the RGM regarding wages within Company guidelines.
8.Eliminating overtime hours for team members who are paid on an hourly basis.
9.Eliminating supplemental tip credit pay.
10.Improving team member productivity using the measurements and tools available through the Company, as well as the following:
- Assuring the Back of the House (BOH) is "optimized":
- i.
Organized … a place for everything, and everything in its place
- ii.
Lineal Flow … eliminate or minimize back tracking
- iii.
Have all items located closest to the next step in the product assembly process
- iv.
Minimize the number of steps taken and the reach needed for all items
- Assuring that team members are thoroughly trained.
- Ensuring that "prep levels' are adequate for the forecasted volume of business for the day, including: products thawing/tempering; raw product prep; preassembled pizza and other products; and so on.
- Ensuring that food preparation areas, make table, cut table, and service areas are stocked appropriately before each shift and maintained during peak volume periods.
- Ensuring products are prepared quickly in accordance with time standards.
- Ensuring that tables vacated by customers are cleared, cleaned, sanitized and reset quickly.
11.
Reduces turnover by managing all aspects of the restaurant professionally and in accordance with Company standards.
12.
If the RGM has delegated scheduling to the Shift Manager, the Shift Manager uses established procedures to produce a sales forecast to be used in the scheduling process.
G.Managing Other Operating Expenses and Semi-Variable Expenses to Budget or less.
II.
CUSTOMER SATISFACTION A.Maintains positive customer relations, which includes: 1.
Assuring personal behaviors and team member behaviors toward all customers are courteous, attentive, respectful, and enthusiastic.
2.
Assuring a comfortable environment for customers.
3.
Executing "Floor Management" by directing activities and greeting and interacting with customers on each shift worked.
4.
Immediately resolving customer complaints by apologizing first and then assuring the satisfaction of the customer.
Complaints may be received in person, by phone, or in writing.
Consult with the RGM if the customer is not satisfied with your suggested resolution.
- a.
B.L.A.S.T.
is the acronym we use for our complaint resolution process:
- Believe the customer
- Listen to the customer
- Apologize to the customer
- Satisfy the customer
- Thank the customer 5.
Immediately contacting the RGM (or DM if the RGM is not available immediately) regarding any incidents in which customers are injured or in which customers claim some harm done to them.
B.
Ensures customers receive prompt, quality service.
This includes: 1.
If the RGM has delegated scheduling to the Shift Manager, scheduling the correct number of team members for forecast sales volume; and deploying those Team members in the correct job roles.
2.
Following established service guidelines and procedures to assure all Hospitality Standards are achieved.
3.
Directing team member activities to assure speed of service standards are met or exceeded, including product preparation times and delivery times.
4.
Personally serving customers as required to meet the demand of the volume of business.
5.
Ensuring customers are greeted properly and seated as quickly as appropriate.
6.
Recognizing and dealing effectively with the special needs of customers.
7.
Ensuring that customer orders are taken promptly, prepared accurately, and served quickly.
8.
Ensuring customer follow-up, which means servers check back with customers frequently to see if there is anything else needed.
9.
Ensuring immediate attention is given to customers ready to pay, either by prompting servers to complete the table cashout procedure or by performing the transaction of cashing out customer as needed.
10.
Ensuring the phone is answered promptly and courteously, following the Telephone Service Essentials.
11.
Responding to customers at pickup counter and drive-thru window; finding order; collecting money for the order; verifying order to customer; and, thanking customers.
12.
Dispatching orders for delivery customers as required to meet the demands of the volume of business, grouping orders by geographical destination and instructing drivers as they arrive and depart which orders to take with them and where to go.
13.
Delivering pizzas as necessary to meet the demands of the business.
14.
Ensuring customers are thanked for their business.
C.Ensures quality ingredients are used to prepare all products.
This includes: 1.
Maintaining Food Safe Temperatures for all ingredients and products.
2.
Ensuring food preparation utensils and food contact surfaces are property cleaned and sanitized.
3.
Ensuring that procedures for receiving, handling and storing ingredients are followed.
4.
Recognizing and correcting any raw ingredients or product problems.
5.
Maintaining inventory levels which assure product freshness and no outages.
6.
Eliminating the potential for cross contamination.
7.
Ensuring that proper procedures are followed to prepare ingredients (dough, sauces, meats, cheeses, and vegetables).
8.
Ensuring salad bar is maintained according to standards of operation (restaurant only).
9.
Personally preparing ingredients as necessary.
D.
Ensures quality products, which includes: 1.
Planning dough, ingredient and product preparation to meet sales volumes and personally preparing these items, as necessary, to meet the demand of the business.
2.
If deemed appropriate by the RGM, performing a product cookability test to verify proper oven and belt speed.
3.
Following proper procedures to process customer orders.
4.
Personally preparing and cooking menu items as required to meet the demands of the volume of business.
5.
Taking every appropriate action, in consultation with the RGM, including driving to another restaurant to pick up product, to resolve outage or potential outage situations.
6.
Maintaining inventory levels which assure product freshness and no outages.
7.
Planning dough, ingredient and product preparation to meet sales volumes and personally preparing these items, as necessary, to meet the demand of the business.
8.
Assuring all products are prepared according to exact specifications, recipes and procedures.
9.
Personally preparing and cooking menu items as required to meet the demands of the volume of business.
E.Ensures that all standards for cleanliness and sanitation are met or exceeded, with particular attention to: 1.
Restrooms.
2.
Table tops; booth backs and seats; and chair seats.
3.
Silverware, plateware, and glassware.
4.
Dining room floors.
5.
Salad bar.
F.Implements new or approved changes in policies, procedures and/or operation standards.
This involves: 1.
Attending training sessions.
2.
Reading "Rollout Guides" or other resources.
3.
Assisting the RGM with training restaurant team members of new procedures or changes.
4.
Participating in crew training and other actions in the restaurant to assure full and correct implementation.
5.
If requested by the RGM, assisting with updating all manuals, resources and job aids as required.
III.PEOPLE A.Maintains positive team member relations and a positive and productive workplace, which involves: 1.
Building relationships with team members based on mutual trust and respect.
2.
Communicating and following the Daland "5 Star" Vision and Core Beliefs.
3.
Promoting teamwork.
4.
Being familiar with benefits available to team members, and referring appropriate questions to the RGM regarding these benefits.
5.
Informing the RGM of all team member grievances.
6.
Performing correct and consistent administration of team member disciplinary procedures, and discussing all recommended discipline with the RGM.
7.
Assuring compliance with various governmental regulations, such as ensuring that all team members are clocked in while working, complying with overtime laws, child labor laws, alcoholic beverage laws, anti-discrimination and anti-harassment laws, FLSA, EEO, etc.
8.
Performing consistent administration of and compliance with Company policies and procedures.
9.
Communicating effectively with the crew and management team.
10.
Assuring team member understanding of the Daland Corporation organization structure and career opportunities within the Company.
B.
Assists the RGM with managing the size and quality of staff.
The following are responsibilities of the RGM, but if requested by the RGM, the Shift Manager may assist with the following: 1.
Planning, recruiting, and hiring to assure a full staff at all times and to assure adequate time for processing MVR's (motor vehicle reports), background checks, etc.
Only the RGM is authorized to hire new team members; and Shift Managers are only permitted to interview applicants if authorized by the RGM.
2.
Continuously recruiting and taking applications from job candidates.
3.
If requested by the RGM, utilizing staffing tools, such as the Pizza Hut Hiring Zone and the team member Assessment; interviewing job candidates; and, checking their references.
4.
If requested by the RGM, making recommendations to the RGM regarding the best qualified candidates.
5.
Complying with Company employment practices and governmental regulations, including EEO, ADA Title I, etc.
C.Assisting the RGM in training newly hired team members and team members preparing for promotions.
This involves: 1.
Following Company training policies and meeting Pizza Hut Training Standards.
2.
Utilizing on-line training, trainer's guides, checklists, job aids, tests and other training resources to assure a thorough job of training.
3.
Using the four step training process of: (1) Preparation (2) Show & Tell; (3) Guided Practice; and (4) Follow-up to assure the trainee can perform all tasks up to required standards prior to being allowed to perform the tasks "solo." D.
Manages team member performance and supervises work.
This includes: 1.Utilizing Coaching for Results, which includes:
- a.Activating team member behavior.
- (1)Providing guidance, direction, and reassurance to all team members.
- (2)Communicating non-negotiable standards of performance to team members.
- (3)Conducting team member meetings, group training sessions and Jump Start meetings.
- (4)Assigning Team members tasks from the Opening, Closing and Maintenance checklist.
- (5)Communicating job assignments for each shift to team members and assuring each team member works their assignment.
- (6)Giving instructions to team members that are clear and assure understanding.
- (7)Assigning team members to breaks.
- (8)Sending team members home early if not needed due to business conditions.
- (9)Calling team members in early, or calling extra team members to work to cover unanticipated surges in business volume.
- (10)Assuring all opening, shift, and closing job duties are completed and performed correctly.
- b.Evaluating team member behavior.
- (1)Observing team member performance each shift.
- (2)Working along side team members and assisting in the performance of their tasks, as needed.=
- (3)Monitoring team member meals and signing team member meal guest checks.
- (4)Ensuring adherence to alcoholic beverage laws of the local community
- (5)Conducting regular, written performance appraisals on all subordinates, using the procedure and forms provided by the Company and within the time specified in compensation plans.
- c.Responding to team member behavior with consequences.
- (1)Taking action (corrective or positive reinforcement) to assure team member performance meets or exceeds standards.
- (2)Providing ongoing counseling that gives praise and recognition to team members for jobs well done; identifies areas of performance needing improvement and methods for improving; and, if required, gives reprimands that are job focused.
2.Handling non-routine occurrences/emergencies and informing the RGM of such occurrences/emergencies.
E.
Assists RGM with developing promotable team members in his/her restaurant and promotable management for Daland.
This includes: 1.
Using Company training programs and resources to prepare candidates for promotions and to assure that the management team is 100% certified in management processes, systems, policies, and procedures.
2.
Making recommendations to the RGM regarding which team members are eligible for promotion to Shift Manager/Leader.
F.
Assists RGM with personnel administration functions, which includes: 1.
Assuring team members complete all required personnel documents such as W-4's, I-9's, Team member Acknowledgment, Arbitration Agreement, Delivery Driver Statement, New Driver Checklist, etc.; and, that these required documents are transmitted to the Home Office.
2.
Documenting required payroll data for team members, including accurate recording of hours; 3.
Managing worker's compensation claims, etc.
in accordance with Company policies and procedures.
4.
Maintaining personnel files on all team members, which includes filing all personnel documents; recording training dates, vacation dates, evaluation dates, pay increases, and absences; etc.
IV.
MARKETING A.Implements marketing programs to increase business.
This includes: 1.
Engaging in positive community/public relations for Pizza Hut.
2.
Providing input for promotional ideas.
3.
Displaying and maintaining Point of Purchase (P.O.P.) and other elements of national, co-op or local marketing programs; 4.
Properly executing authorized marketing programs, including new product tests.
5.
Taking initiative to recommend new opportunities for increasing business.
V.
FACILITIES A.Maintains a quality environment for our customers and team members.
This includes: 1.
Conducting routine Preventive Maintenance on the facility and equipment.
2.
Taking corrective actions pursuant to the RGM's safety inspections.
3.
Advising the RGM regarding non-routine problems and following up to assure such problems are corrected.
4.
Maintaining cleanliness and sanitation in all areas of the restaurant.
5.
Organizing all work space to ensure ease of operation.
6.
Providing a quality work environment that is safe and complies with all OSHA regulations.
7.
Cleaning and organizing refrigeration units.
8.
Ensuring floors are clean and free from obstruction.
9.
Keeping HVAC vents and filters clean.
10.
Ensuring trash is disposed of promptly and according to security procedures.
11.
Ensuring parking lot and grounds are free of trash and debris and taking action to correct deficiencies.
12.
Ensuring all equipment is used according to proper operational procedures.
13.
Keeping restrooms cleaned and stocked.
14.
Keeping food prep areas cleaned and sanitized according to approved procedures.
15.
Ensuring the daily cleaning and maintenance of all equipment.
16.
Correcting any unsafe conditions.
17.
Following up to ensure all Scheduled Maintenance and Daily CM&A items are completed.
VI.
ADMINISTRATION A.Effectively manages time, allocating an appropriate amount to each Key Result Area.
B.Manages all paperwork, documentation, written reports, etc.
and assures these are always submitted on time and that they are accurate, complete and organized.
C.If requested by the RGM, orders inventory items used in the restaurant.
This involves these processes: 1.
Review of the Inventory on Hand is performed.
The Inventory on Hand is compared to the Weekly Ideal Usage, which is obtained from the Product Cost Analysis report, and a determination is made as to the amount of each particular item to order.
The order is then recorded on an order sheet, or is entered into the computer for electronic transfer of order information.
2.
Amount ordered of each item may be adjusted upward or downward based on projections of upcoming sales trends, coupon impact, weather changes or other extra-restaurant environmental changes.
3.
Calls in orders for supplies on the phone, or electronically submits order via computer.
D.If requested by the RGM, conducts weekly inventory of all food, paper and beverage products used in the unit.
This involves these processes: 1.
Physically reviewing and counting the inventory on hand (which involves climbing shelves, bending, kneeling, etc.).
2.
Rearranging inventory to assure proper rotation (first in, first out) and to make it easier to count and control.
3.
Recording amounts of inventory on hand on the inventory form.
E.If requested by the RGM, prepares the weekly labor schedules.
This involves these processes: 1.
Updating Guest Check Comments file in the restaurant computer to assist in forecasting labor hours.
2.
Reviewing Guest Check Comments file and upcoming promotions that may affect sales during the upcoming week.
3.
Forecasting anticipated sales volume by shift, by day and by week.
The forecast is based on knowledge of any outside events that may influence sales such as coupons, promotions, etc.
Particular consideration must be given to how sales are generated--that is, dine-in business contrasted to carry-out business or delivery business.
4.
Updating sales forecasts in the FMS (computer system) based on outside events that may influence sales.
5.
Reviewing requests for days off that have been turned in by team members and when possible allowing for requested days off.
6.
Using experience, past schedules, Black Book information, Guest Check Comments, knowledge of team members' abilities, labor goals, and FMS (computer system) recommended labor schedule to assist in scheduling the proper number of team members each shift to meet sales volume and labor hour guidelines.
7.
Obtaining the RGM's approval of the schedule, then posting the final schedule in accordance with Daland Corporation's policies and procedures.
F.Performs daily accounting procedures.
This includes these processes: 1.
At close of business day requests a sales report from the FMS computer to determine total sales entered into the cash drawers throughout the system.
2.
Any cash paidouts or miscellaneous deposits from the day are verified with what is in the system.
3.
Cash on hand is counted and reconciled against total sales.
4.
Total deposit is calculated, and a deposit is prepared.
5.
Dough waste and PPP waste is documented and calculated on the form provided and filed for use in forecasting future prep levels.
6.
All gift checks are counted and verified against prior counts less current gift check sales on the Gift Check Tracking form.
G.If requested by the RGM, performs weekly accounting procedures.
This includes these processes: 1.
Completing, as required, the Weekly Sales Analysis and analyzing it.
2.
Completing the Weekly Inventory.
3.
Completing the payroll functions.
4.
Analyzing the Daily Business Summary Report to determine performance in key measurement areas.
5.
Preparing the weekly packet for the home office, using the checklist provided to assure all required items are included.
6.
Calling any needed FRS numbers or statistics to the District Manager.
H.Meets all deadlines and assures that subordinates meet their deadlines.
I.Manages all paperwork, documentation, written reports, etc.
and assures these are always submitted on time and that they are accurate, complete and organized.
J.Maintains and updates required files, manuals, and reports.
NON-ESSENTIAL FUNCTIONS: The "non-essential" functions are routinely performed by the person holding the Shift Manager's position and they are essential to the effective operation of the restaurant.
However, these functions are considered "non-essential" to the position.
The Manager on Duty is then accountable for assuring the delegated functions are correctly performed.
A.Receives and stores inventory items used in the unit.
This involves these processes: 1.
Checking in products as received off delivery vehicles to verify product quality and that amount charged for on the delivery receipt/packing slip is correct when compared to amount received.
Signing the delivery receipt/packing slips for amount of goods received.
2.
Using a two-wheeled hand truck, assists and oversees other employees in proper storage of products.
Weight of items varies.
Generally, more than one person is available to perform this task.
3.
Entering on inventory screen of the computer the amount and cost of each product item received as noted on the delivery receipt/packing slip.
MINIMUM QUALIFICATIONS/REQUIREMENTS: The following are the qualifications and minimum requirements necessary for a person to perform this job.
A.Ability to work a minimum of three (3) days and at least 30 hours per week, but must be available to work more than 30 hours per week if necessary due to business necessity.
In addition to having the flexibility to work a variety of shifts, including late nights and weekends.
B.Valid driver's license, insurance and automobile.
Position involves taking large amounts of cash receipts to the bank at different times of the day including at night.
Banks are generally at a distance requiring a person to drive to the bank.
Position may also need automobile to pick up product, make pizza deliveries, etc.
C.Able and willing to travel.
Position requires occasional travel for training, new store openings and meetings, which may be held at a distance from home not feasible to drive daily.
Overnight stays at an out-of-town location may be required during the training sessions, new store opening, and meetings for up to one week at a time.
D.Telephone (cellular or land line) at residence.
There are circumstances that may arise at the restaurant of which the manager must be informed while off duty.
E.Sufficient physical agility to perform the functions of the position.
This includes these processes: 1.
Sufficient physical strength to lift most items used in the operation of the restaurant.
2.
Sufficient communication skills.
Position involves communicating with team members, superiors and customers.
3.
Ability to move at a fairly quick pace and to remain stationary for periods of six to eight hours at a time.
The position requires person to perform all of the above at different times and intervals as needed by the realities of the environment and the position.
F.Ability to maintain a state of self-composure under conditions of stress and anxiety.
Position routinely involves stress resulting from work overload, role ambiguity, conflicting demands from various customers, and team members.
Person in this position must be able to function effectively under these conditions.
G.Previous experience with this Company as a Shift Manager/Leader; or previous restaurant management experience with another Company.
H.Sufficient mental and cognitive ability to perform the calculations and fill in the sales and product tracking forms used by the Company.
Estimate is that ability to read, write and perform arithmetic procedures at the 12th grade level will be sufficient.
I.Ability to perform all of the duties of the hourly team members and supervisors under this person's supervision.
As time and circumstances dictate the person in this position may have to assist or take over the duties of an hourly team member in order to expedite good customer service.
Also necessary in order to train new team members in this function.
J.Ability to communicate effectively with a large variety of persons with diverse backgrounds.
Position is one where incumbent provides direction and supervision to a variety of subordinates with diverse levels of education, differences in ages, and experience.
Must be able to express ideas and concepts to these persons to assure teamwork through organization and leadership.
EQUIPMENT USED: Standard restaurant office equipment such as calculator, telephone, and computer.
"Pizza Wheel".
This is a device with a handle and a round stainless steel blade that is used to cut certain types of pizza dough crusts.
"Rocker Knife".
This is a device about two feet long with a stainless steel handle that extends across the top of a stainless steel blade fashioned in a curve.
It is used to cut certain types of pizzas by placing on the pizza and rocking the blade across the pizza surface.
"Vegetable Chopper".
This is a hand operated mechanical device used to slice whole raw vegetables into smaller pieces for use on the make table.
"Crock".
A generic term used to describe a variety of containers used to hold food items served on a salad bar.
Knives, spoons, spatulas and other common utensils.
"Make Table".
An open topped, refrigerated, compartmented table for the storage of food items used in the preparation of products for customer orders.
Has doors which allow access to interior refrigerated section below the table top where additional food items are stored as back-up for the items stored on top of the table.
"Cut Table".
A stainless steel table where cooked pizzas are cut into slices and where other products are assembled prior to serving them to the customer.
"Oven".
A power driven device operating at high temperatures used to bake food products.
"Automatic Dishwasher".
A mechanical device consisting of: (1) a dirty dish/rinse table, used to rinse and prepare dishes for washing; (2) dishwasher compartment, where dishes are washed with hot water, soap, sanitizing chemical and pressurized water; and, (3) clean dish/drain table, where clean dishes drain, dry and are sorted for storage.
"Dough Proofer".
A metal cabinet heated to approximately 95 degrees Fahrenheit, in which panned dough is placed to obtain the correct rise in the dough.
"Three Compartment Sink".
A stainless steel sink, separated into three compartments used to wash, rinse and sanitize all kitchen tools, and smallwares not washed in the automatic dishwasher.
"Pan Gripper".
This is a mechanical device used to grip certain types of pizza pans for purposes of lifting or carrying when they have been heated to a high temperature.
"Portion Cups".
These are pre-measured cups used by Pizza Hut restaurants for portioning cheese and toppings for pizzas.
"Scales".
This is a small table model scale used to weigh and portion ingredients used in the recipes of various products.
"Pan Separators".
These are plastic items, of varying shape, diameter and circumference, used to separate pans filled with dough to protect the dough inside the pan from contamination and to allow pans to be stacked for storage.
"Dough Perforator".
This is a mechanical device consisting of a handle attached to a small wheeled drum that is dotted with metal protrusions.
It is used to perforate certain types of dough prior to topping to prevent formation of bubbles during baking.
"Cutting Board".
This is a hard surface board, rectangular or square in shape, on which pizzas and other food products are cut.
"Reach In".
A refrigerated piece of equipment with doors which open to allow dough or pizza ingredients to be stored inside for easy access.
"Scraper Block".
A device with a stainless steel blade and a wooden handle in a rectangular shape used to cut dough for portioning, and scraping the make table/cut table surfaces off for cleaning.
"Prep Table".
A table about 34 to 36 inches high, with a stainless steel top.
The table is used as a work surface for the preparation of many ingredient items used in the Pizza Hut.
"Kitchen and Dining Utensils".
Such as knives, spoons, spatulas, etc.
"Plates, Bowls, Mugs, Tumblers".
and other items to serve food and beverages to customers.
"Spoon".
A stainless steel device with a long handle and a curved end used for applying sauce to prepared dough.
"Pan".
A round metal device with a raised edge for holding dough prior to topping and baking.
"Walk-in".
A refrigerated compartment of sufficient size to allow the individual to actually walk into the refrigerated compartment to obtain or store perishable items.
Compartment may be sufficiently cold to freeze items.
"Freezer".
A refrigerated box maintained at sufficient cold temperatures so as to freeze items stored inside.
"Ice Machine".
A device that automatically receives water, freezes it, and stores it as ice in an attached storage bin.
"Soda Dispenser" (pop machine).
A device that mixes syrup and carbonated water and dispenses carbonated soft beverage (soda, pop).
"Point of Sale Computer".
Electronic device used in tracking orders, inventory, payroll information.
Contains cash drawer used to make change for customer transactions, track paidouts, delivery orders, dispatching.
"FMS" Field Management System.
Software used on the point of sale computer that provides management information necessary in managing the day to day operations of the restaurant.
Miscellaneous equipment such as a telephone, carry-out boxes and bags, hand towels, etc.
Serving tray, ticket book, bus tub, flatware and other small items.
Note: Many restaurants have additional equipment such as beer boxes, spaghetti magic machine, etc.
PLACES WHERE WORK IS PERFORMED: This work is performed on the employer's premises.
Location of premises may vary throughout the employer's Company.
This job description was developed by observing the work in process and from information provided by the management of Daland Corporation.
Not Specified
R
Software Engineer (Quantum and Photonics)
✦ New
Salary not disclosed
Rydberg Technologies is seeking a dynamic and experienced Software Engineer for quantum and photonic devices. This is a hands-on role in the development and integration of software solutions for our cutting-edge quantum and photonic devices and technology. You will work across the full stack, from hardware electronic controls to signal processing. The ideal candidate will bring broad expertise in software programming, electrical engineering, and background in physics to advance our technologies, products, and services.
Key Responsibilities include, but are not limited to:
Software Development: Design, develop, and maintain software for hardware devices, including control systems, signal processing algorithms, and user interfaces.Full-Stack Engineering: Implement solutions across the full technology stack, from low-level hardware interfaces to high-level application software.Hardware Integration: Collaborate with physicists, hardware and electrical engineers to integrate electronic controls, optimize performance, and ensure seamless operation of prototypes and devices.Signal Processing: Develop and refine signal processing techniques to enhance device accuracy and performance.Research and Innovation: Stay abreast of the latest advancements in software and embedded systems, quantum and photonics technology, and electrical engineering, contributing to innovative solutions and improvements.Team Collaboration: Work closely with cross-functional teams, including physicists, engineers, and researchers, to achieve project goals and deliver high-quality products.Documentation and Testing: Create comprehensive documentation for software systems and conduct rigorous testing to ensure reliability and robustness.
Competencies and Skills:
Embedded Systems Programming: Proficiency in C, C++, Python, specifically tailored to embedded systems. Experience in developing firmware for RF receivers, including real-time processing and low-level hardware interaction.Firmware Development: Skills in developing and optimizing firmware for controlling laser devices and quantum sensors.Real-Time Operating Systems (RTOS): Knowledge of RTOS for managing embedded systems efficiently.Data Acquisition and Processing: Techniques for acquiring, processing, and analyzing data from laser and quantum sensor systems.Digital Signal Processing (DSP): Techniques for implementing DSP algorithms on both general-purpose processors and specialized hardware like FPGAs and DSPs.Software Defined Radio (SDR): Familiarity with SDR platforms and tools such as GNU Radio, and skills in developing and optimizing SDR Development: Developing algorithms for signal processing, data analysis, and control systems. Developing and optimizing algorithms for RF signal acquisition, demodulation, decoding, and analysis.Control Theory: Understanding of feedback control systems and PID controllers for stabilizing lasers and quantum sensors.Microcontrollers and Microprocessors: Understanding of different types of microcontrollers (e.g., ARM Cortex) and microprocessors.Hardware-Software Integration: Skills in interfacing software with hardware components like sensors, actuators, and communication modules.Memory Management: Efficient use of memory and processing power in constrained environments. Control Signal Processing: Knowledge in processing signals from various sensors (e.g., photodetectors, temperature sensors, accelerometers, etc.).Communication Protocols: Familiarity with protocols like SPI, I2C, UART, and wireless communication standards (Bluetooth, Wi-Fi).Security: Implementing security measures in embedded systems to protect data and privacy.Laboratory Automation: Skills in automating experiments and measurements using platforms like MATLAB or LabVIEW.
Additional Skills:
Control Systems: Knowledge of feedback control systems for automatic gain control (AGC), frequency control, and other RF system parameters.RF Testing and Measurement: Experience with RF testing equipment like network analyzers, spectrum analyzers, signal generators, and oscilloscopes.Communication Protocols: Understanding of communication standards and protocols, such as Bluetooth, Wi-Fi, LTE, and 5G.Simulation and Modeling: Use of tools like HFSS, CST Microwave Studio, or ADS for simulating and modeling RF circuits and antenna systems.Machine Learning: Sound understanding and experience of machine learning algorithms, including supervised, unsupervised, and reinforcement learning.Deep Learning: Proficiency in neural networks, CNNs, RNNs, LSTMs, GANs, and other deep learning architectures.Data preprocessing: Skills in data cleaning, normalization, augmentation, and feature engineering.Model Training and Optimization: Experience with techniques for training models efficiently, hyperparameter tuning, and optimization. Debugging and Testing: Proficiency in debugging tools and techniques for both software and hardware, and experience with automated testing frameworks.Version Control: Use of version control systems for development.Project Management: Skills in managing projects with cross-disciplinary teams.Education: Keeping up-to-date with latest advancements in signal processing and embedded systems.
Key Responsibilities include, but are not limited to:
Software Development: Design, develop, and maintain software for hardware devices, including control systems, signal processing algorithms, and user interfaces.Full-Stack Engineering: Implement solutions across the full technology stack, from low-level hardware interfaces to high-level application software.Hardware Integration: Collaborate with physicists, hardware and electrical engineers to integrate electronic controls, optimize performance, and ensure seamless operation of prototypes and devices.Signal Processing: Develop and refine signal processing techniques to enhance device accuracy and performance.Research and Innovation: Stay abreast of the latest advancements in software and embedded systems, quantum and photonics technology, and electrical engineering, contributing to innovative solutions and improvements.Team Collaboration: Work closely with cross-functional teams, including physicists, engineers, and researchers, to achieve project goals and deliver high-quality products.Documentation and Testing: Create comprehensive documentation for software systems and conduct rigorous testing to ensure reliability and robustness.
Competencies and Skills:
Embedded Systems Programming: Proficiency in C, C++, Python, specifically tailored to embedded systems. Experience in developing firmware for RF receivers, including real-time processing and low-level hardware interaction.Firmware Development: Skills in developing and optimizing firmware for controlling laser devices and quantum sensors.Real-Time Operating Systems (RTOS): Knowledge of RTOS for managing embedded systems efficiently.Data Acquisition and Processing: Techniques for acquiring, processing, and analyzing data from laser and quantum sensor systems.Digital Signal Processing (DSP): Techniques for implementing DSP algorithms on both general-purpose processors and specialized hardware like FPGAs and DSPs.Software Defined Radio (SDR): Familiarity with SDR platforms and tools such as GNU Radio, and skills in developing and optimizing SDR Development: Developing algorithms for signal processing, data analysis, and control systems. Developing and optimizing algorithms for RF signal acquisition, demodulation, decoding, and analysis.Control Theory: Understanding of feedback control systems and PID controllers for stabilizing lasers and quantum sensors.Microcontrollers and Microprocessors: Understanding of different types of microcontrollers (e.g., ARM Cortex) and microprocessors.Hardware-Software Integration: Skills in interfacing software with hardware components like sensors, actuators, and communication modules.Memory Management: Efficient use of memory and processing power in constrained environments. Control Signal Processing: Knowledge in processing signals from various sensors (e.g., photodetectors, temperature sensors, accelerometers, etc.).Communication Protocols: Familiarity with protocols like SPI, I2C, UART, and wireless communication standards (Bluetooth, Wi-Fi).Security: Implementing security measures in embedded systems to protect data and privacy.Laboratory Automation: Skills in automating experiments and measurements using platforms like MATLAB or LabVIEW.
Additional Skills:
Control Systems: Knowledge of feedback control systems for automatic gain control (AGC), frequency control, and other RF system parameters.RF Testing and Measurement: Experience with RF testing equipment like network analyzers, spectrum analyzers, signal generators, and oscilloscopes.Communication Protocols: Understanding of communication standards and protocols, such as Bluetooth, Wi-Fi, LTE, and 5G.Simulation and Modeling: Use of tools like HFSS, CST Microwave Studio, or ADS for simulating and modeling RF circuits and antenna systems.Machine Learning: Sound understanding and experience of machine learning algorithms, including supervised, unsupervised, and reinforcement learning.Deep Learning: Proficiency in neural networks, CNNs, RNNs, LSTMs, GANs, and other deep learning architectures.Data preprocessing: Skills in data cleaning, normalization, augmentation, and feature engineering.Model Training and Optimization: Experience with techniques for training models efficiently, hyperparameter tuning, and optimization. Debugging and Testing: Proficiency in debugging tools and techniques for both software and hardware, and experience with automated testing frameworks.Version Control: Use of version control systems for development.Project Management: Skills in managing projects with cross-disciplinary teams.Education: Keeping up-to-date with latest advancements in signal processing and embedded systems.
Not Specified
Logistics Manager
Salary not disclosed
Your role
Mission
The Logistics Manager at the customer center is responsible for coordinating supply chain activities to drive customer satisfaction and contribute to sustainable profitable growth within the organization. The mission is to design, implement, and optimize logistics processes, with a focus on improving delivery date transparency, managing inventory and returns, mitigating risks, and supporting order entry teams to achieve world-class logistics operations for Atlas Copco Compressors LLC.
Roles and Responsibilities
The Logistics Manager coordinates supply chain activities to enhance customer satisfaction and support sustainable profitable growth. This position collaborates with customers, other customer center functions, Regional Operations Managers, the Atlas Copco North American Service Center (NASC), the ACT! team (managing the SAP template), Distribution Centers, Production Companies, and Divisional HQ to achieve common local and global objectives, ensuring efficient, transparent, and resilient logistics processes.
Logistics
- Collaborate with Regional Operations Managers to oversee warehouse processes across four regional warehouses, including designing processes for expediting unused parts returns, conducting data analysis for optimal inventory levels, and inventory reduction initiatives.
- Oversee the process of updating the ERP system with accurate data to improve delivery date forecasts for customers and the sales team, accounting for variables such as transport times, shipping lanes, and port issues, in collaboration with the ACT! team.
- Coordinate with the NASC for transportation operations (managing 90% of inbound and outbound shipments) and liaise with their trade compliance team to ensure regulatory compliance.
- Manage order management functions, including supporting all order entry teams (those reporting to business line managers and the order desk reporting directly to the Logistics Manager, which handles the majority of orders), to ensure timely and accurate customer deliveries.
- Oversee logistics operations for regional branches and service contracts, ensuring consistency and efficiency.
- Develop and monitor key performance indicators (KPIs) such as inventory turnover, on-time delivery, return processing efficiency, and forecast accuracy; mitigate supply chain risks (e.g., port disruptions or supplier delays) through contingency planning and stakeholder collaboration.
- Support ad-hoc projects from management team like new sales process idea etc
General
- Lead and manage logistics team members, providing direction, coaching, and performance evaluations.
- Ensure transparency in end-to-end logistics processes to maintain an optimal and transparent cost allocation structure.
- Strictly comply with:
- Code of Conduct
- Sustainability Responsibility (Environmental) - Logistics is responsible to maintain a healthy environment by reducing CO² emissions and packaging waste.
- Approval flow (Prokura).
Contribute to positive Company branding by projecting a knowledgeable, professional, and customer-oriented image to customers.
Perform all duties in accordance with Atlas Copco standards, while always striving to understand the needs and expectations of customers.
Take whatever action is appropriate and required to get the job done and to establish and maintain communications with all people/employees considered necessary to get the job done.
Perform other duties as assigned.
To succeed, you will need
Qualifications
Supervisory Responsibility
Yes
Experience
Minimum five (5) years of experience in logistics, preferably in a large, global organization, with experience in process design, inventory optimization, delivery forecasting, risk management and stakeholder coordination.
Education
4-year degree in supply chain management, logistics, business, or a related field, or an equivalent combination of education & experience.
Skills
- Strong knowledge of logistics and supply chain processes, including inventory management, process optimization, delivery forecasting, and risk mitigation.
- Proficiency in data analysis to support inventory reduction, process improvement, and accurate delivery forecasting.
- Advanced knowledge of MS Office 365 and ERP systems (e.g., SAP), with experience updating system data for logistics planning.
- Excellent communication skills, both verbal and written, with a proven ability to build relationships with regional and external stakeholders, including the ACT! team.
- Ability to work independently with a high level of initiative, commitment, and perseverance.
- Strong team orientation and focus on collaboration and team building.
Travel
Up to 10% local travel.
In return, we offer
Flexible benefits plan including medical, dental, and vision.
Generous 401 (k) retirement plan match in addition to an automatic contribution.
Competitive paid time off and sick time.
Life & Disability insurance.
Paid training
Excellent paternal, adoption, and maternal leave.
Equipped with a company vehicle, laptop, cell phone and uniform.
Salary based on knowledge, skills, and experience. $124K-155K Salary has been geographically adjusted based on cost-of-living factors.
Job location
This role offers a hybrid working arrangement, allowing you to split your time between working remotely and being on-site at our Rock Hill office
Contact information
Talent Acquisition Team: Joseph Coleman
Diverse by nature and inclusive by choice
Bright ideas come from all of us. The more unique perspectives we embrace, the more innovative we are. Together we build a culture where difference is valued and we share a deep sense of purpose and belonging.
Atlas Copco Compressors LLC is an equal opportunity employer and complies with all applicable federal, state and local fair employment practices laws. Atlas Copco Compressors LLC strictly prohibits and does not tolerate discrimination against employees, applicants or any other covered persons because of race, color, religion, creed, national origin or ancestry, ethnicity, sex, gender (including gender nonconformity and status as a transgender or transsexual individual), age, physical or mental disability, citizenship, past, current or prospective service in the uniformed services, genetic information, or any other characteristic protected under applicable federal, state or local law. All Atlas Copco Compressors LLC employees, other workers and representatives are prohibited from engaging in unlawful discrimination. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, training, promotion, discipline, compensation, benefits and termination of employment.
Not Specified
V
Site Leader
✦ New
Salary not disclosed
Job Posting
At Vertiv, we design, manufacture, and service mission-critical infrastructure technologies for vital applications in data centers, communication networks, and commercial and industrial environments. We are the trusted service provider for 70%+ of Fortune 500 companies, including industry-leading data centers and providers of colocation and cloud service.
Why Vertiv is the best company for Field Service professionals:
- Vertiv is an industry leader in technology and services with a best-in-class customer service and safety culture.
- Company leaders have many years of hands-on field service experience in this industry and many others.
- Tremendous focus is placed on employee technical and leadership development.
- Technical training takes place in our state-of-the-art training academy or regional training center with a strong focus on immersive, hands-on learning.
- Competitive benefits include smartphone, laptop, personal protective equipment (PPE), other tools-of-the-trade, 401k with a company match & generous PTO/vacation plan, medical, vision, & dental & more.
- Abundant technical resources including 24/7 technical/factory support and technical online libraries of product documentation, work instructions, and self-help troubleshooting guides.
- Company-wide commitment to promoting a strong work/life balance.
- An employer-of-choice for veterans with technical backgrounds.
The Site Leader will provide world-class jobsite leadership for large, long-duration, high-profile orders of Vertiv power and/or thermal equipment. The Site Leader is the primary Vertiv service on-site technical representative for large jobs, from construction start, through start-up, site acceptance testing, and project completion. The Site Leader is required to establish, grow, and maintain excellent rapport with all customers, co-workers, sales representatives, and others as appropriate. The site lead is required to work in tandem with the assigned project manager to drive cost controls, schedule adherence, resource management, and ultimately a positive customer experience.
Duties & Responsibilities:
Role Summary:
- Provide jobsite technical leadership for large projects.
- Factory certified on a variety of products that interact with Liebert systems:
- Expert working knowledge of electrical power distribution, generators, switchgear, automatic transfer switches, et al.
- Leads an on-site team of 1-2 project leaders who may be leading crews of 1-10 technicians each.
- Represents Vertiv at daily customer meetings and can speak to technical requirements for the day's schedule to coordinate activity with other parties on-site.
- Leads and supports start-up and site testing activities for assigned projects:
- Ensure sufficient manpower on-site each day to perform start-up and site testing work.
- Assist during start-up and site testing as necessary, depending upon man-power availability and site location.
- Provide daily status reports to service management, project management, and sales rep.
Technical Responsibilities:
- Keeps current on Vertiv equipment start-up and commissioning processes, procedures, and tools-of-the-trade.
- Keeps current on safety bulletins, safety field change notices, field change notices, and service tips.
Safety Responsibilities:
- Leads daily Vertiv toolbox talk, pre-job safety walk and inspection, and drives any necessary corrective/preventative actions required in a timely fashion.
- Operates in a safe manner in accordance with published safety guidelines.
- Must wear appropriate PPE as per company guidelines and accordance with job duties.
- Adhere to work hours policy guidelines \"14 hours rule.\"
- Report all work-related accidents or injuries within 24 hours to the appropriate personnel.
- Must be a role model to fellow associates with regards to safety by setting a positive example.
- Lead by example with the use of stop work authority, good catch engagement, and timely closure of necessary corrective/preventative actions.
Administrative Responsibilities:
- Ensure adherence to Vertiv warranty process in partnership with project manager.
- Provide accurate and timely reporting in accordance with published guidelines:
- Timecards, expense reports, mileage reports, SR/task closure, forms, et al.
- Supports project manager with obtaining any necessary technical data so project manager can maintain project systems.
- Maintain company property according to company policies:
- Credit cards, PPE, test equipment, laptop, smartphone, et al.
Customer Satisfaction Responsibilities:
- Provide proper and adequate communication to internal and external customers.
- Ensure daily alignment of customer expectations and Vertiv activity, and drive clarification/re-alignment if there appears to be misalignment of expectations.
- Maintain customer satisfaction rates according to company guidelines.
Personal Performance Expectations:
- Make decisions based on the fundamental 5 in order of importance: safety, quality, timeliness, cost, productivity.
- Capable of making timely decisions, technical and commercial, under pressure.
- Maintain productive utilization rate according to company guidelines.
- Adhere to company dress code and safety regulations.
- Understand and comply with company startup/escalation process and procedures.
- In all aspects of job requirements, must lead by example, and conduct themselves aligned to Vertiv behaviors.
- Ability to communicate with all levels within the organization - managers, co-workers, support services, sales, electronic communications, et al.
- Ability to handle stressful situations and provide a calming effect to customer.
- High level of diplomacy when interacting with internal and external customers.
Qualifications:
- Experience (one or more of the following):
- ASEET preferred.
- Equivalent industry experience, specifically leading and actively participating in start-up and commissioning of Vertiv power equipment - preferred.
- ASMET.
- Six years military experience in a related field.
- Minimum 2 years of experience in industrial construction management.
- Interpersonal skills:
- Vertiv behavior practitioner.
- Strong organizational skills.
- Independent operator.
- Strong verbal and written communication skills.
- Able to build and maintain trusting customer relationships.
- Collaborative and cooperative in high-stress environments.
- Able to communicate at all levels of an organization with a base level of executive presence.
- Able to quickly respond to changing customer priorities without disruption or resistance.
- Mastery of electrical/electronic test equipment and theory.
- Must be able to read and interpret electrical one-line diagrams and blueprints.
- In all aspects of the job, need to lead by example, and held to a higher standard of conduct:
- Product certifications up to date.
- Meet all aspects of the job description.
- Performance evaluation rating of meets all aspects of job requirement or better.
- Consistent performance and customer relation skills.
- Technical skills:
- Ability to make an immediate site evaluation, skills to include: environmental temperature, and general operating conditions without supervision.
- Ability to summarize and report all work-related tasks performed.
- Independently evaluate, recognize, and recommend acceptable customer solutions based upon site evaluation.
- Recommend and direct activities at a customer site by leading technical activities of other technicians.
- Provide on-site customer consultation with the assistance of project leader(s).
- Capable of providing project leadership and on-site direction for assigned projects.
- Expert in COHE procedures.
Not Specified
Sr. Shipping and Receiving
✦ New 🏢 Sika
Salary not disclosed
With over 100 years of experience, Sika is a worldwide innovation and sustainability leader in the development and production of systems and products for commercial and residential construction, as well as the marine, automotive, and renewable energy manufacturing industries.
Sika is a specialty chemicals company with a globally leading position in the development and production of systems and products for bonding, sealing, damping, reinforcing, and protection in the building sector and industry. Sika has subsidiaries in 103 countries around the world, produces in over 400 factories and develops innovative technologies for customers worldwide. In doing so, it plays a crucial role in enabling the transformation of the consruction and transportation industries toward greater environmental compatibility. Approximately 33,000 employees generated CHF 11.20 billion in sales in 2025
Sika is looking for an experienced shipping and receiving lead, to join our growing team. At Sika, the shipping and receiving employees perform various Shipping and Receiving tasks, pick material for internal process orders, and perform cycle counts as required.
Key Responsibilities:
- • Examine shipment contents and compare with records such as manifests, invoices, or orders to verify accuracy.
• Record shipment data, such as weight, charges, space availability, damages, or discrepancies for reporting,
accounting, or recordkeeping purposes.
• Prepare documents, such as work orders, bills of lading, or shipping orders, to route materials.
• Confer or correspond with establishment representatives to rectify problems, such as damages, shortages, or
nonconformance to specifications.
• Move levers or controls that operate lifting devices, such as forklifts, lift beams with swivel-hooks, hoists, or
elevating platforms, to load, unload, transport, or stack material.
• Inspect product load for accuracy and safely move it around the warehouse or facility to ensure timely and
complete delivery.
• Manually or mechanically load or unload materials from pallets, skids, platforms, cars, lifting devices, or other
transport vehicles.
• Position lifting devices under, over, or around loaded pallets, skids, or boxes and secure material or products for
transport to designated areas.
• Weigh materials or products and record weight or other production data on tags or labels.
• Perform routine maintenance on vehicles or auxiliary equipment, such as cleaning, lubricating, recharging
batteries, fueling, or replacing liquefied-gas tank.
• Move controls to drive gasoline- or electric-powered trucks, cars, or tractors and transport materials between
loading, processing, and storage areas.
• Operate or tend automatic stacking, loading, packaging, or cutting machines.
• Signal workers to discharge, dump, or level materials.
• Complete cycle counts daily or as needed.
• Support other areas of production as designated by Manufacturing Manager.
• Pull and put away all material needed for production.
• Organize and keep all materials together in the same locations.
• All other duties as assigned.
Qualifications:
High School Diploma or equivalent preferred
• Ability to read, write, and perform basic math
• 1-2 years of relevant work experience
• Forklift experience required
Perks & Benefits
401k with Generous Company Match
Bonuses
Medical, Dental, and Vision Benefits
Paid Parental Leave
Life Insurance
Disability Insurance
Paid time off, Paid holidays
Floating holidays + Paid Volunteer Time
Wellness/Fitness Reimbursements
Education Assistance
Professional Development Opportunities
Employee Referral Program & More!
Sika fosters a culture of entrepreneurship, empowering each individual to make decisions, learn from experiences, and shape their own career path. The safety and well-being of employees are top priorities at Sika, with a strong commitment to open communication and maintaining a safe workplace. In addition, Sika actively contributes to the community and promotes sustainability by giving back, minimizing environmental impact, and embracing social responsibility.
We offer competitive salaries, aligned with local market benchmarks and the specific scope and responsibilites of each role. Compensation is determined based on skills relevant to the position, education, and or training. We are committed to fair and equitable pay practices in accordance with applicable laws and regulations.
Sika Corporation is committed to a work environment that supports, inspires, and respects all individuals that apply. As an equal opportunity employer Sika will consider all qualified applicants without discrimination on the basis of race, color, religion, sex, pregnancy, sexual orientation, gender identity, age, disability, national or ethnic origin, or other protected characteristics.
We offer competitive salaries, aligned with local market benchmarks and the specific scope and responsibilities of each role. Compensation is determined based skills relevant to the position, education and/or training. We are committed to fair and equitable pay practices in accordance with applicable laws and regulations.
Not Specified
R
Flight Control Law Engineer
Salary not disclosed
We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.
As a Flight Controls Engineer at Reliable Robotics, you will be part of the Guidance, Navigation, and Control (GNC) Team. You will design, implement, integrate, and test flight control laws for all phases of operation including autotaxi, auto-takeoff, autoland, and automatic rollout. You integrate real-world hardware and C/C++ flight software as part of ongoing flight test programs, and perform simulation analysis and data reduction in our Python and C/C++ modeling & simulation environment.
Responsibilities
Establish autoflight and flight control system requirements
Interface with Pilots and Operations team to develop flight test plans, respond to squawks, and communicate design updates
Design and analyze flight control laws from conceptual design through implementation and certification
Develop simulation models to evaluate flight control system performance and stability
Implement control laws and algorithms in flight software
Test flight software in simulation, Monte Carlo, hardware-in-loop, and flight
Basic Success Criteria
BS in aerospace engineering, robotics, or equivalent field
3+ years of hands on, professional experience developing and testing flight controls algorithms
Experience with flight dynamics simulation and model identification
Professional experience with developing C/C++ flight software and Python data reduction & analysis
Excellent written and verbal communication skills
Preferred Criteria
MS in aerospace engineering, robotics, or similar advanced degree
Current pilot, instrument or commercial ratings
Experience with flight controls, autopilot, or flight management system certification
We are developing and building high-integrity, safety-critical systems for automated flight, and your role is critical to what we do at Reliable Robotics. With the support of the entire team, you will be making key contributions to the autoflight system that drive our core company mission forward.
This position is based at our facility in Mountain View, California.
Must be willing to travel up to 10% of the time.
This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.
All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.
At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.
If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to
Compensation Range: $155K - $215K
Apply for this Job
Not Specified
M
Quality Control Inspector III/ CMM Programmer
✦ New
Salary not disclosed
Elevate your career at Marotta Controls, a New Jersey Top Workplace three years running! Dedicated to innovation, quality and excellence, we deliver cutting edge control systems for the Aerospace & Defense industry. At Marotta, we value bold thinking and teamwork, and we empower our employees to push boundaries while delivering top-tier solutions to our customers. Our team fosters a fun, collaborative culture where creativity and technical excellence thrive! Your next big opportunity starts here. Be part of a company where your work supports a mission that makes a difference-apply today!
Quality Control Inspector III/ CMM Programmer
Overview:
The Quality Control Inspector/Programmer is responsible for visual and dimensional inspections on manufactured parts, assemblies, and/or sub-assemblies. This role inspects parts to engineering drawings, customer purchase order(s), work orders, industry standards, and specifications. The inspector may report detailed inspection accept / reject information directly to the customer with shipments.
Minimum Required Qualifications :
Essential or Primary / Key Responsibilities :
Additional Duties / Responsibilities :
Work Environment :
.
Physical Requirements :
This position is at our Montville, NJ office location.
Pay Range: $30.50 - $38.00/hour
Many of our contracts require proof that you are a U.S. citizen and/or that an export license has been obtained for employees who are citizens of certain countries. Your employment, both initially and continually thereafter, is conditioned on production of such proof of citizenship and/or any export license that may be required to comply with any and all applicable laws, regulations, or executive orders, or required by Federal, State, or local government contracts.
At Marotta Controls, we are committed to a fair, performance-driven compensation approach that promotes consistency across all levels of our organization. We ensure that pay decisions are free from bias, based on objective criteria, and are regularly reviewed.
Your level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, experience, and internal consistency.
Additionally, we offer a highly competitive compensation package for this opportunity, including incentive compensation and a comprehensive suite of premium benefits. These include medical, prescription, dental, vision, life, and disability insurance, a 401(k) plan with company match, tuition assistance, paid vacation, sick and personal days, paid holidays, and flexible scheduling options such as compressed workweeks. We value and reward employee achievements and host multiple engagement events each quarter to foster a strong, supportive workplace culture.
If you are looking to grow or accelerate your career and be part of a best in class organization while enjoying a work-life balance, please visit our website at to learn more about us and to apply. Check out all of our openings at ARE ENCOURAGED TO APPLY
No agencies, please.
Pay Range: $30.50 - $38.00 per hour
Quality Control Inspector III/ CMM Programmer
Overview:
The Quality Control Inspector/Programmer is responsible for visual and dimensional inspections on manufactured parts, assemblies, and/or sub-assemblies. This role inspects parts to engineering drawings, customer purchase order(s), work orders, industry standards, and specifications. The inspector may report detailed inspection accept / reject information directly to the customer with shipments.
Minimum Required Qualifications :
- Technical school diploma or equivalent combination of education and experience.
- Minimum 5-7 years' experience with Mechanical / Electronic part inspection in a manufacturing or production Environment.
- Experience in quality with machined / mechanical parts using GD&T interpretation, able to do programs for automatic inspection with Optical Vision Systems and CMMs. plus. Able to use Profilometers and special Microscopes for visual characteristics with other measuring tools and instruments.
- Knowledgeable with AS9102 FAIR (First Article Inspection Report) documentation and Inspection.
- Familiar with AQL, sampling methods and traceability.
- Strong verbal/written communication skills required for multi-faceted interactions with all levels of personnel within the organization, as well as any and all outside agents, including but not limited to; vendors, suppliers, customers, etc.
- Strong computer literacy, with MS Office/PC expertise and demonstrated experience with applicable systems, programs, equipment, etc.
- Must be a US Citizen.
Essential or Primary / Key Responsibilities :
- Train other inspection personnel on CMM software and manual measurement techniques.
- Perform Mechanical measurements and visual quality assessments of received items, work-in-progress and finished goods.
- Performs 1 st Piece Inspection on machined parts and inspection for product Quality Analysis.
- Inspect with thread gages, GO/NO-GO plug gages, V-Blocks, Gage Blocks, height stands, dial indicators, various types of ID/OD micrometers, inspection of thread Pitch Diameter with special gages.
- Generate spreadsheets for data collection, evaluate history of product and recommend on Sample Size as per an AQL
- Reconcile final inspection documentation for shipments
- Interact with source inspector as needed and part-take in source inspection duties if necessary.
- Read, understand and interpret Mechanical/Electronic drawings.
- Approve incoming materials by confirming specifications, conducting visual and physical measurement of the product., rejecting if necessary and processing part thru to the next step.
- Approve in-process production by confirming specifications, conducting visual, physical measurement and physical measurement of the product., communicating required adjustments to production supervisor.
- Approve finished products by confirming specifications, conducting visual and physical measurement of the product.
- Document inspection results by completing reports and logs, summarizing re-work and waste, and inputting data into quality database
- Always verify equipment is operational and calibrated, follow operating instructions and coordinate repairs
- Work with Engineering, Operations, and other sources to resolve issues and meet goals
Additional Duties / Responsibilities :
- Bring initiatives and activities to closure in a timely manner through effective interaction with individuals, both internal and external to the Marotta organization (as required).
- Maintain and continue to elevate relationships with Business Development, Engineering, Operations, Customer Service and all other facets of the company
- Abide by all safety, quality, housekeeping and company policies/procedures to ensure compliance to various regulatory and internal system requirements
- Contribute to a positive and cooperative work environment through effective communication at all levels internal and external to the organization
- Actively participate in team meetings, improvement initiatives/programs, etc. to provide constructive recommendations and initiate actions to support company initiatives/goals
- Consistently demonstrate commitment to company values
- Keep management informed of area activities and of any significant problems
- Assume responsibility for related duties as required or assigned
- Ensure that work area and work areas of direct reports are clean, secure, and well maintained
- Complete special projects and miscellaneous assignments as required
Work Environment :
- While performing the duties of this job, the employee can be exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment may be loud.
- This job interacts both in a professional office environment and a manufacturing/machine shop environment. This role uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines, as well as environments inclusive of the appropriate eye, hearing and foot protection (as required).
- This is a full-time position. Overtime and weekend work may be required as job duties demand.
- Travel is rare but may be required to coordinate proper CMM inspection techniques with Suppliers.
.
Physical Requirements :
- While performing the duties of this job, the employee is regularly required to talk and hear.
- Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Vision and color vision must pass job-required vision screening
- The employee is occasionally required to sit; climb or balance; and stoop, kneel, or crouch
The employee may be required to lift and/or move items weighing up to 25 pounds.
This position is at our Montville, NJ office location.
Pay Range: $30.50 - $38.00/hour
Many of our contracts require proof that you are a U.S. citizen and/or that an export license has been obtained for employees who are citizens of certain countries. Your employment, both initially and continually thereafter, is conditioned on production of such proof of citizenship and/or any export license that may be required to comply with any and all applicable laws, regulations, or executive orders, or required by Federal, State, or local government contracts.
At Marotta Controls, we are committed to a fair, performance-driven compensation approach that promotes consistency across all levels of our organization. We ensure that pay decisions are free from bias, based on objective criteria, and are regularly reviewed.
Your level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, experience, and internal consistency.
Additionally, we offer a highly competitive compensation package for this opportunity, including incentive compensation and a comprehensive suite of premium benefits. These include medical, prescription, dental, vision, life, and disability insurance, a 401(k) plan with company match, tuition assistance, paid vacation, sick and personal days, paid holidays, and flexible scheduling options such as compressed workweeks. We value and reward employee achievements and host multiple engagement events each quarter to foster a strong, supportive workplace culture.
If you are looking to grow or accelerate your career and be part of a best in class organization while enjoying a work-life balance, please visit our website at to learn more about us and to apply. Check out all of our openings at ARE ENCOURAGED TO APPLY
No agencies, please.
Pay Range: $30.50 - $38.00 per hour
Not Specified
B
Leasing Specialist
Salary not disclosed
B I R G E & H E L D
Investing in Communities to Transform Lives.
Supporting 3 Multifamily Communities
Raintree, Stoney Brooke, and Eagle Creek (Lexington, KY) - 762 Units
WHO WE ARE
It's fun to work in a company where people truly believe in what they are doing. At Birge & Held, we are committed to bringing excitement and energy to the business of multifamily housing. We expect every employee within our organization to be a leader working in a collaborative environment towards a shared vision.
At Birge & Held, our employees have a Passion for People, demonstrate Leadership at Every Level, and are Always Learning & Innovating. Through these core values, we make our purpose a reality, “Investing in Communities to Transform Lives.”
POSITION OVERVIEW
The Multi-Site Customer Experience Associate plays a pivotal role in delivering exceptional customer service to prospective and current residents. This individual is responsible for fostering strong relationships, understanding the unique needs of prospects and residents, addressing day-to-day challenges, and collaborating with cross functional teams to ensure seamless operations. They act as the first point of on-site contact for residents and prospects, representing the company’s commitment to quality and satisfaction. The success of this role will be measured by attainment of a predetermined key performance indicators (KPIs) and quarterly goals at the individual and community level.
KEY RESPONSIBILITIES
Relationship Building with Prospects
- Conduct all business in accordance with company policies and procedures, Fair Housing, Americans with Disabilities Act, Fair Credit Reporting Act, and all other laws pertaining to apartments.
- Engage proactively with prospects to build strong relationships and create a positive first impression of the company.
- Assist potential residents by providing detailed information about available units, community amenities, and leasing options.
- Follow up with leads from the off-site sales and leasing team to support lease closings and maintain a seamless prospect journey.
- Implement and support resident events or activities to enhance the community experience.
Understanding Prospect and Resident Needs
- Conduct needs assessments to match prospects with the most suitable units based on their preferences and requirements.
- Develop a thorough understanding of apartment layouts, features, and community amenities to address inquiries with confidence and accuracy.
Resident Resolution
- Serve as the primary point of contact for residents reporting concerns, ensuring timely responses and resolutions.
- Troubleshoot and resolve minor resident concerns, including maintenance requests, billing questions, and general inquiries.
- Collaboration with the Resident Screening team (as integrated into your property portfolio(s)) to optimize leasing performance and align with property goals through standard communication channels and routine touchpoints.
- Track and manage all leasing data, including prospects, applications, and resident information, within the company’s software systems.
- Coordinate with the Resident Screening team to confirm applications are processed timely and applicants are well informed and prepared for the move-in procedure.
Data Management
- Maintain accurate and up-to-date records within the company’s property management software (Onesite).
- Prepare and present regular reports on resident satisfaction, leasing performance, and operational key performance indicators (KPIs) to leadership.
Collaboration with Central Property Operations
- Resident Screening: Partner with the Resident Screening team to ensure applications are processed quickly and accurately, while preparing residents and units for a smooth handoff back to the site for move-in execution after screening and lease completion.
- Resident Services (Renewals & Billbacks): Collaborate with Resident Services to ensure timely renewal pricing is available and communicated, and that move-out damages are documented and submitted promptly to support accurate billbacks.
- Accounts Receivable (AR): Work alongside the AR team by providing on-the-ground resident context, assisting with delivery of hard notices when needed, and supporting collection efforts through direct resident communication.
Day-to-Day Tasks
- Assist in handling various administrative tasks, including preparing leasing documents, updating resident records, and managing correspondence.
- Support community events or initiatives aimed at enhancing resident experience.
- Understand and adhere to standard operating procedures.
EDUCATION, EXPERIENCE, AND SKILLS
- Demonstrated passion for customer service.
- Strong interpersonal skills with a customer- focused mindset.
- Strong verbal and written communication skills.
- One (1) year or more years in a customer service, sales, or customer facing role.
- Be a self-starter with a proactive, solutions-driven mindset to address concerns and effectively implement next steps.
- Proficiency in property management software (e.g., Onesite, Yardi, or similar), Microsoft Office suite, and customer relationship management (CRM) tools.
- Exhibit professionalism and discretion throughout all interactions with coworkers, residents, vendors, and the community.
- A desire for professional development and continued learning.
- Ability to manage one’s time.
- Ability to perform at a high level in a fast-paced work environment while successfully adapting to changing priorities and demands.
WHAT WE OFFER
- Maintain work-life balance with a generous paid time-off policy including up to 18 days of PTO per year. In addition to traditional PTO, you’ll receive 12 full days and two half day holidays including a floating holiday and your birthday. Separately, if you’ve served in the military, you’ll receive Veterans Day as a paid day off.
- Make a difference in your community with 8 hours of Volunteer Paid Time Off (PTO) each year, giving you the ability to support a cause or organization of your choice.
- Take advantage of supportive leave benefits, including up to 3 weeks of paid parental leave and 6 weeks of paid childbirth leave.
- Boost your earnings with monthly commission opportunities and additional quarterly bonuses, both based on site-specific Key Performance Indicators (KPIs), giving you the chance to be rewarded for your performance and contributions.
- Save on living expenses with exclusive employee discounts at Birge & Held properties.
- Prioritize your well-being with a robust wellness program that supports your physical, mental, and emotional health. Enjoy up to $25 in monthly gym membership reimbursements and gain access to certified health coaches dedicated to helping you achieve your personal wellness goals.
- Access competitive dental, vision, and comprehensive medical plans to ensure you and your family receive the care you need, along with convenient online tools to help you manage your healthcare benefits with ease.
- Enjoy peace of mind today and tomorrow with a 401(k) plan that includes competitive employer contributions.
- Receive automatic enrollment in the company paid basic life insurance policy with the opportunity to elect supplemental life insurance. With employment at Birge & Held you have the ability to elect additional ancillary benefit options including but not limited to, Long-Term Disability (LTD), Short-Term Disability (STD) and Critical Illness Insurance that provides extra protection against unexpected health challenges.
- Grow your career through the support of a dedicated Talent Development team and a tuition reimbursement program. Whether you're building new skills, exploring new roles, or pursuing a degree, you'll have the resources and guidance to reach your full potential.
- Be part of an organization consistently recognized as one of the Top Workplaces in the USA, where your contributions are valued and celebrated.
Birge & Held is an Equal Opportunity Employer and we are committed to hiring a diverse and talented workforce.
#INOS
Not Specified
B
Customer Experience Associate
🏢 Birge & Held
Salary not disclosed
B I R G E & H E L D
Investing in Communities to Transform Lives.
Who We Are
It's fun to work in a company where people truly believe in what they are doing. At Birge & Held, we are committed to bringing excitement and energy to the business of multifamily housing. We expect every employee within our organization to be a leader working in a collaborative environment towards a shared vision.
At Birge & Held, our employees have a Passion for People, demonstrate Leadership at Every Level, and are Always Learning & Innovating. Through these core values, we make our purpose a reality, “Investing in Communities to Transform Lives.”
Position Overview
The Customer Experience Associate plays a pivotal role in delivering exceptional customer service to prospective and current residents. This individual is responsible for fostering strong relationships, understanding the unique needs of prospects and residents, addressing day-to-day challenges, and collaborating with cross functional teams to ensure seamless operations. They act as the first point of on-site contact for residents and prospects, representing the company’s commitment to quality and satisfaction. The success of this role will be measured by attainment of a predetermined key performance indicators (KPIs) and quarterly goals at the individual and community level.
Key Responsibilities
Relationship Building with Prospects
- Conduct all business in accordance with company policies and procedures, Fair Housing, Americans with Disabilities Act, Fair Credit Reporting Act, and all other laws pertaining to apartments.
- Engage proactively with prospects to build strong relationships and create a positive first impression of the company.
- Assist potential residents by providing detailed information about available units, community amenities, and leasing options.
- Follow up with leads from the off-site sales and leasing team to support lease closings and maintain a seamless prospect journey.
- Implement and support resident events or activities to enhance the community experience.
Understanding Prospect and Resident Needs
- Conduct needs assessments to match prospects with the most suitable units based on their preferences and requirements.
- Develop a thorough understanding of apartment layouts, features, and community amenities to address inquiries with confidence and accuracy.
Resident Resolution
- Serve as the primary point of contact for residents reporting concerns, ensuring timely responses and resolutions.
- Troubleshoot and resolve minor resident concerns, including maintenance requests, billing questions, and general inquiries.
- Collaboration with the Resident Screening team (as integrated into your property portfolio(s)) to optimize leasing performance and align with property goals through standard communication channels and routine touchpoints.
- Track and manage all leasing data, including prospects, applications, and resident information, within the company’s software systems.
- Coordinate with the Resident Screening team to confirm applications are processed timely and applicants are well informed and prepared for the move-in procedure.
Data Management
- Maintain accurate and up-to-date records within the company’s property management software (Onesite).
- Prepare and present regular reports on resident satisfaction, leasing performance, and operational key performance indicators (KPIs) to leadership.
Collaboration with Central Property Operations
- Resident Screening: Partner with the Resident Screening team to ensure applications are processed quickly and accurately, while preparing residents and units for a smooth handoff back to the site for move-in execution after screening and lease completion.
- Resident Services (Renewals & Billbacks): Collaborate with Resident Services to ensure timely renewal pricing is available and communicated, and that move-out damages are documented and submitted promptly to support accurate billbacks.
- Accounts Receivable (AR): Work alongside the AR team by providing on-the-ground resident context, assisting with delivery of hard notices when needed, and supporting collection efforts through direct resident communication.
Day-to-Day Tasks
- Assist in handling various administrative tasks, including preparing leasing documents, updating resident records, and managing correspondence.
- Support community events or initiatives aimed at enhancing resident experience.
- Understand and adhere to standard operating procedures.
Education, Experience, And Skills
- Demonstrated passion for customer service.
- Strong interpersonal skills with a customer- focused mindset.
- Strong verbal and written communication skills.
- One (1) year or more years in a customer service, sales, or customer facing role.
- Be a self-starter with a proactive, solutions-driven mindset to address concerns and effectively implement next steps.
- Proficiency in property management software (e.g., Onesite, Yardi, or similar), Microsoft Office suite, and customer relationship management (CRM) tools.
- Exhibit professionalism and discretion throughout all interactions with coworkers, residents, vendors, and the community.
- A desire for professional development and continued learning.
- Ability to manage one’s time.
- Ability to perform at a high level in a fast-paced work environment while successfully adapting to changing priorities and demands.
What We Offer
- Maintain work-life balance with a generous paid time-off policy including up to 18 days of PTO per year. In addition to traditional PTO, you’ll receive 12 full days and two half day holidays including a floating holiday and your birthday. Separately, if you’ve served in the military, you’ll receive Veterans Day as a paid day off.
- Make a difference in your community with 8 hours of Volunteer Paid Time Off (PTO) each year, giving you the ability to support a cause or organization of your choice.
- Take advantage of supportive leave benefits, including up to 3 weeks of paid parental leave and 6 weeks of paid childbirth leave.
- Boost your earnings with monthly commission opportunities and additional quarterly bonuses, both based on site-specific Key Performance Indicators (KPIs), giving you the chance to be rewarded for your performance and contributions.
- Save on living expenses with exclusive employee discounts at Birge & Held properties.
- Prioritize your well-being with a robust wellness program that supports your physical, mental, and emotional health. Enjoy up to $25 in monthly gym membership reimbursements and gain access to certified health coaches dedicated to helping you achieve your personal wellness goals.
- Access competitive dental, vision, and comprehensive medical plans to ensure you and your family receive the care you need, along with convenient online tools to help you manage your healthcare benefits with ease.
- Enjoy peace of mind today and tomorrow with a 401(k) plan that includes competitive employer contributions.
- Receive automatic enrollment in the company paid basic life insurance policy with the opportunity to elect supplemental life insurance. With employment at Birge & Held you have the ability to elect additional ancillary benefit options including but not limited to, Long-Term Disability (LTD), Short-Term Disability (STD) and Critical Illness Insurance that provides extra protection against unexpected health challenges.
- Grow your career through the support of a dedicated Talent Development team and a tuition reimbursement program. Whether you're building new skills, exploring new roles, or pursuing a degree, you'll have the resources and guidance to reach your full potential.
- Be part of an organization consistently recognized as one of the Top Workplaces in the USA, where your contributions are valued and celebrated.
Birge & Held is an Equal Opportunity Employer and we are committed to hiring a diverse and talented workforce.
Not Specified
jobs by
✓ All jobs loaded