Assembly To Machine Language Converter Jobs in Usa

• Competitive base rate - $22.00-$32.20/ hour depending on experience.15% shift differential.
• Medical/Prescription Drug/Dental/Vision Benefits on Day 1 of employment
• 401(k) Retirement Savings Plan
  • 4.5% company match if you contribute at least 5%
• Quarterly Bonus potential
• Paid Time Off (PTO)
• 8 company paid holidays per year
• Employer paid Life Insurance, AD & D plus optional coverage for yourself, spouse and child(ren)
• Employee Assistance Program
• MN Paid Leave/and/or Short-Term Disability provided by ARCH
• $1,000 Sign on Bonus

• Inspects products during the machining operation to determine if parts meet specifications, complying with established standards and methods for inspection, testing, evaluation and calibration
• Follow all job work order instructions
• Must be able to run more than one machine where cycle time permits
• Complete all required shop floor documentation for the job including both part-dimensional and visual inspection
• Maintain equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; reports to management/maintenance the need for machine repairs
• Understands and comply with company policy safety guidelines, quality systems requirements and housekeeping standards

• High school diploma or GED equivalent
• Due to contractual requirements, this position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.

• Machine Tool Technology degree (completed or pursuing)
• A minimum of 1 years' experience operating a CNC Lathe machine
• Strong mechanical aptitude
• Ability to read and understand blueprints
• Strong attention to detail
• Effective verbal and written communication skills

Job Description:

Build small automotive sub-assemblies.

Fits and assembles components to construct, rebuild, and repair sub-assemblies by performing the following duties.

Responsibilities:

• Analyzes assembly blueprint and specifications manual and plans machine building operations.
• Verifies conformance of parts to stock list and blueprints.
• Lays out hole locations and drills and taps holes on parts for assembly.
• Aligns components for assembly and bolts, screws, dowels, welds, or rivets parts together.
• Removes high spots, and smooths surfaces.
• Verifies alignment and tolerances of moving parts.
• Tests operation of assembly by hand.
• Assembles, sets up, and operates machine to verify functioning, machine capabilities, and conformance to customer's specifications.
• Build small sub-assemblies and mounting to bases.
• Welding small parts for the sub-assemblies.
• Identifying parts on prints for build purposes.
• De-burring, stamping, and painting of sub-assemblies.
• Building guarding around projects.
• Machining (drilling, tapping, lathe work, Bridgeport, etc)
• Provide cost to complete estimates bi-weekly.
• Update resource charts daily.
• Log rework at the time of the rework.
• Participate in "Go fast” and Kaizen events.
• Keep work areas clean, maintain 5S and safety.
• Other duties and projects may be assigned.

Education and/or Experience:

• High School Diploma or general education diploma (GED);
• Minimum of Three years related experience and/or training; or equivalent combination of education and experience.
• Knowledge of basic mechanics and experience in machine tool.
• General experience in assembly prints.
• General knowledge in machining; Blueprint Reading; Basic MIG Welding.
• General knowledge with regards to general build practices; Understanding of build specifications (i.e., threading, dowel length, etc.).
• Knowledge of overhead cranes, Hi-lo, Pallet Jack and other related equipment required to perform the job function.
• Knowledge of safety precautions in the Manufacturing environment.
• Ability to speak effectively before groups of customers or employees of organization.
• Active Driver's License

• 
  
• Perform preventive maintenance inspection before the start of each shift as outlined on the Preventive Maintenance Check Sheet. Apply oil or grease to specified areas. Confirm the operability of all detectors.
  
• The ability to perform a more comprehensive PM on the machines including but not limited to oil changes.
  
• Basic troubleshooting of chain assembly equipment to understand the alarm messages, identify what this issue is and how to correct the issue.
  
• The assembly line consists of the following machines/operations: roller link assembly, chain assembly, riveting, pre-stressing, articulation checking, center distance measuring, automatic cutting, and endless operation, washing, final inspection, and packing.
  
• Adhere to work standards. Responsible for maintaining production schedules, quality control records, chain assembly records, shipping charge numbers, and the traceability records for each charge of chain and referring any unusual problems to the departmental supervisor.
  
• Prepare test samples for quality control per work standard. Record production and any other data required utilizing various forms as directed.
  
• Utilize a machine-monitoring system to record downtime.
  
• Detect faulty operation or defective material and report these and other unusual conditions to the group leader or supervisor.
  
• Maintain work area and equipment in a clean and orderly condition and follow standard safety regulations.
  
• Perform other similar and associated duties as required or directed.
  

• 
  
• High school diploma or equivalent preferred; equivalent relevant experience may be considered
  
• 2-5 Years of experience running multiple machines and performing preventative maintenance.
  
• Safety First mindset
  
• Strong focus on Quality
  
• Ability to work well in a team environment
  
• Ability to work in a fast-paced environment
  
• Must have good mechanical aptitude and problem-solving skills
  
• Ability to use material handling devices such as hand trucks, and hydraulic lift trucks.
  
• Basic Computer Skills.
  

• 
  
• A competitive compensation package, including medical and dental benefits, life insurance, and generous 401(k) match and profit sharing.
  
• Paid vacation time
  
• Step increases
  
• Shift differential pay
  
• Weekly pay
  

• Prepare and set up multiple work centers, ensuring initial parts meet Quality Assurance specifications.
• Set up numerical control machines or machining centers to perform functions such as cutting, drilling, milling, reaming, boring, and broaching.
• Mount, align, and secure tooling attachments and workpieces.
• Select and install cutting tools in machine spindles.
• Load control media or enter commands to retrieve preprogrammed instructions from the database.
• Operate CNC Avenger 200T, 850 X, and Orbitform Assembly Machines.
• Diagnose and troubleshoot issues in multiple work centers.
• Operate equipment through trial runs to verify setups and make necessary adjustments.
• Monitor displays and machine operations to detect malfunctions and resolve issues promptly.
• Enter commands or manually adjust machine controls to correct malfunctions or out-of-tolerance machining.
• Coordinate activities for operators and conduct on-the-job training for new operators.
• Instruct equipment operators and maintenance personnel on setup, operation, and maintenance of equipment.
• Perform preventive maintenance and minor repairs on machines as needed.
• Calculate and set machine controls to regulate factors such as cutting depth, speed, feed, and coolant flow.
• Stop machines to change cutting tools and setups as required by the machining sequence.
• Measure parts for conformance to blueprint specifications using precision measuring instruments.
• Discuss control media errors with programming personnel to resolve problems.
• Perform other customer-driven or product-driven duties as assigned by the supervisor.

• High school diploma or GED required.

• 3 to 5 years of experience in CNC and assembly machine operations.

• Knowledge of computer systems and hard gauging measuring equipment.
• Strong understanding of mechanical manufacturing processes and production tools.
• Ability to read tooling prints and perform mathematical calculations related to machining.
• Background in CNC programming.
• Familiarity with software packages relevant to machining operations.
• Attention to detail and troubleshooting aptitude.
• Strong communication, organizational, and people skills.
• Conceptual thinking and mechanical aptitude.

• Good vision and adequate hearing.
• Ability to lift light loads (10-20 lbs daily) and heavier loads (50-60 lbs occasionally).
• Manual dexterity and coordination.
• Mobility for bending and kneeling as required.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington.

As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes. Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards. To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations. You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements. Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks.

• Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.

• Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.

• Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.

• Initiate and document any nonconforming materials or assemblies according to specifications and procedures.

• Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.

• Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.

• Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.

• Inspect mockups of engineering design changes to ensure adherence to specifications.

• Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes.

• Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records.

• Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required.

• Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts.

• Document discrepancies and report them to the appropriate personnel for resolution.

• Assist in the training and instruction of lower-grade inspectors, providing guidance as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work on-site at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 3+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).

• 3+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators.

• 1+ years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices.

• Experience as a Quality Inspector.

• Experience working with Microsoft Office (Excel, Word, PowerPoint).

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to complete Fall Protection Training.

Preferred Qualifications:

• Experience inspecting welds / welds certification

• Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.)

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 27, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.