Assembly Machine Language Programming Jobs Remote Jobs in Usa
40 positions found — Page 2
Production Manager
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
Role Summary/Purpose
The Production Supervisor at PCX Aerosystems Santa Ana, CA will lead daily operations in one of several departments at the plant to ensure reliability and consistency on the production line. Assignments may include time in the machine shop, assembly, test, overhaul and fuel tank departments. This role will lead a team of hourly production employees to meet orProexceed production, safety, quality goals and delivery goals while maintaining positive employee relations.
Essential Responsibilities
- Oversight and management of front-line hourly manufacturing employees
- Develop operational plans for assigned areas/departments of responsibility including, but not limited to: asset utilization, manufacturing loss improvements, delivery, budgets and effective scheduling of manpower / resources
- Act as a focal point and monitor assigned areas to ensure hardware and subassemblies' delivery dates meet production needs
- Coordinate the efforts of cross-functional groups and across shifts to resolve bottlenecks
- Assure timely shipments to all customers
- Drive process/product improvement programs in areas of responsibility
- Enforce company policies
- Lead cell/group to achieving goals and improvement in quality, delivery and cost reduction
- Ensure communication of key business/customer issues to employees
- Provide total cell/group leadership to continuously improve manufacturing, test, assembly and process for all assigned products/processes/areas as assigned
- Advocate six sigma processes to all aspects of cell/group
- Provide ongoing support in the scheduling of resources, technical leadership and facilitating the production process and flow of hardware to meet customer requirements
- Proactively support and participate in plant wide activities and initiatives
Works with business leadership at all levels
Delivers products as part of a team.
Position Requirements
Qualifications/Requirements
* Bachelor's degree from an accredited university or college (or a high school diploma/GED with at least 5 years of experience in Manufacturing)
* Minimum 3 additional years of supervisory experience in operations/industrial environments
* Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening.
Desired Characteristics
* Bachelor's degree in Engineering preferred
* Ability to work non-traditional hours including weekends as needed
* Strong oral and written communication skills.
* Strong interpersonal and leadership skills.
* Ability to influence others and lead small teams.
* Lead and coordinate multiple initiatives of moderate scope and impact simultaneously
* Effective problem solving skills.
* Ability to effectively work across all functions (i.e., HR, finance, sourcing, production, materials, shipping/receiving, sales, contracts, EHS, etc.) within a matrix organization to achieve organizational goals/objectives
* Prior experience leading production teams within a manufacturing environment
* Prior experience in Machining and/or Fabrication/Assembly
* Experience as manufacturing process leader preferred
* Aerospace industry experience preferred
* Six Sigma / Green belt certified preferred
* Familiarity with Lean Manufacturing, working with VSM, Visual Management and DMAIC principals
* Ability to complete manpower planning and analysis including productivity, efficiency and overtime management
LANGUAGE SKILLS
Ability to effectively communicate with peers and supervisors and provide technical feedback as
required. Ability to read and comprehend simple instructions, company communications, and
memos. Ability to write reports and simple correspondence. Ability to effectively present information
in one-on-one and small group situations to customers, clients, and other employees of the
organization.
MATHEMATICAL SKILLS
Ability to apply concepts of basic math techniques.
COMPUTER SKILLS
To perform this job successfully, an individual must be proficient in basic computer skills.
REASONING ABILITY
Ability to define and solve practical problems. Ability to interpret a variety of technical instructions in
mathematical, diagram, written or verbal format. Ability to deal with problems involving several
abstract and concrete variables in standardized situations. Ability to apply common sense
understanding to carry out instructions furnished in written, oral, or diagram form.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee must be able to stand at least 6 to 8 hours a day. Must be able to work with their hands, arms and be extremely accurate. Must be able to walk, sit, stoop, kneel, crouch, or crawl on a regular basis. Must be able to lift and/or move up to 10 pounds on a frequent basis. Must be able to lift and/or move up to 25 pounds on a regular basis. Specific vision abilities required by this job include close & color vision
WORK ENVIRONMENT
While performing the duties of this job, the employee is regularly exposed to moving high speed machinery and mechanical parts. The employee is occasionally exposed to wet and/or humid conditions. outside weather conditions, machine oils, metal fillings, acetone, paints, solvents, grease, cutting fluids, fumes or airborne particles, toxic or caustic chemicals, and risk of electrical shock or vibration. The noise level in the work environment is usually loud.
Integral Aerospace, Inc dba PCX Aerosystems - Santa Ana is an equal opportunity/affirmative action employer. We consider applicants without regard to race, color, religion, creed, gender, national origin, age, sex, sexual orientation, disability, genetic information, marital or veteran status, or any other category protected by federal, state or local law.
Shift
Various Shifts
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Santa Ana
Category
Manufacturing
Req Number
MAN-25-00008
Position
Production Supervisor
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Exempt
Hiring Manager(s)
Jacqueline Cadena
This position is currently accepting applications.
Apply Now
PURPOSE OF THE POSITION: The person holding this supervisory position is considered a part time team member and is responsible and accountable for: the daily operation of the restaurant, assisting the RGM with hiring and training team members, directing the activities of team members, and rewarding or disciplining team members in consultation with the RGM; and, performing these functions in ways that assure compliance with all Company policies and procedures, customer satisfaction, a high level of team member morale and the attainment of sales and profit objectives. The Shift Manager reports directly to the RGM, and holds the second highest position in the restaurant if there is not an Assistant Manager. In restaurants with an Assistant Manager, the Shift Manager is the next highest position.
ESSENTIAL FUNCTIONS: The following accountabilities are essential to this position and a high degree of performance must be achieved in each in order for the incumbent to be successful. These accountabilities are organized according to our six Key Result Areas.
When the word "policies" or the phrase "policies and procedures" or similar language is used in any of the Company's documents, the term refers to all policy and procedure bulletins, manuals, training materials, memoranda, newsletters, communications on the “Document Viewer” on the computer, and all other documents and oral discussions with team members' supervisors, which relate to the restaurant. The management team shall be responsible for ensuring that all team members, including the manager himself/herself, comply with all Company policies and procedures and all Pizza Hut standards at all times and take immediate steps to correct actions not in accordance with such policies, procedures and standards.
I. PROFITABILITY
A.Planning
1.Executes the RGM’s plans and overall Daland Corporation plans to achieve consistent sales growth and profit growth.
2.Achieves planned/budgeted profits, as communicated by the RGM. This involves:
- a.Using established control systems and procedures to measure actual results and to identify deviations from planned results.
- b.Assisting the RGM, as requested, in developing and implementing corrective action plans to assure actual results conform to plan.
B.Policies: Complies with all Company policies and procedures, including but not limited to, those relating to inventory, cash, payroll, food handling, interactions with guests, team members, and vendors, and legal compliance.
C.Manages and Controls Cash: In conjunction with the RGM and other managers, ensures that that all cash and checks, minus the change fund is correctly deposited, credit card transactions are correctly settled, and cash over or short is minimized.
1. Performs Banking Transactions
- a. Assures that two deposits daily are prepared and deposited in the bank (more than two may be required in higher volume units.)
- i. The intent of the first deposit is to remove from the unit an amount approximately equal to the total of cash plus checks, minus the amount of the change fund.
- ii. The first deposit is to be made after 4:00 p.m., when the opening manager is ready to leave for the day.
- iii. The final deposit will be all remaining cash plus checks, minus the change fund.
- iv. The managers may take such deposits to the bank, using his/her personal vehicle, and depending on the time of day, make the deposit in the bank lobby or in the night depository.
- v. Assure the “Weekly Deposit Log” is completed for each deposit made.
- b. If requested by the RGM, the other managers shall perform the following tasks. These are the responsibility of the RGM, but may be delegated to other managers.
- i. Picks up validated deposit slips at the bank.
- ii. Verifies bank validated deposit amounts to sales and cash reports as well as the “Weekly Deposit Log,” and assures all appropriate signatures are on the “Weekly Deposit Log”.
- iii. Sends a copy of the “Weekly Deposit Log” to the Home Office with all other weekly paperwork.
D.Controls cash drawers and team member “banks”, following all established manual and computer procedures.
1. Establishes the correct number of cash drawers. Number of cash drawers in use at one time may vary from one to four depending on size of the restaurant, sales volume, method of delivering services to customer. Amount of cash in each drawer is recorded and kept in the drawer for the duration of the shift, or until “dropped” from the cash drawer to the safe.
2. Establishes cash banks for delivery drivers.
3. As needed, will operate cash drawer following established procedures for cash drawer operation.
4. As necessary, money is removed from cash drawers from time to time and secured in the safe.
5. Throughout the shift, cash drawer transactions, such as paid outs, miscellaneous receipts (paid ins), discounts and promotions are properly accounted for, including all documentation; transactions are properly entered into the computer; and, all documentation is organized and secured for transmitting to the Home Office.
6. Assures cash drawers are counted and balanced at the end of each shift or when there is a change in cashiers.
7. Records tips for servers and drivers on credit card/gift card transactions and correctly settles all credit card/gift card transactions.
8. Inform the RGM anytime cash short exceeds $5 for a day.
9. Reviews reports and otherwise takes actions to ensure that team members properly report actual sales and actual tips, and ensures that team members do not falsify credit card receipts or other Company documents. This requires due diligence on the part of the managers.
E.Assists the RGM in Managing and Controlling Cost of Sales: The actual cost per the P&L must be equal to or between Ideal Cost and Allowable Cost as calculated in the Product Cost Analysis report and Bonus Calculation Sheet. This includes these processes:
1.Utilizes manuals and/or automated procedures approved by the Company, orders all approved products used in the restaurant.
2.Properly accepts deliveries and properly stores inventory items used in the restaurant. This involves these processes:
- a.Checks in products as received off of delivery vehicles to verity product quality and verifies that amounts charged for on delivery receipt/packing slips are for amount of goods received.
- b.Uses a two-wheeled hand truck to unload and products, assists and oversees other team members in proper storage of products. Weight of items varies from 10 to 50 pounds. Full load on two-wheeled hand truck may exceed 500 pounds. Generally, ensures that more than one person is available to perform this task.
- c.“Autoposts” inventory received, or enters on inventory record the amount and cost of each product item received, as noted on delivery receipt/packing slip.
3.Accurately accounts for all product coming into the restaurant, used to prepare products, or transferred out of the restaurant.
4.Assures the proper execution of all recipes and specifications for preparing ingredients and assembling products.
5.Manages waste which involves maintaining a FIFO (First In, First Out) system and marking all products with a Made – Ready – Discard label.
6.Assures the correct order entry procedures are followed by all order takers.
7.Assures compliance with team member consumption policies.
8.Performs a Daily Product Usage Analysis on critical inventory items to assure usage meets guidelines.
9.Communicates goals to team members and follows up with team members to ensure goals are being met.
10.The following tools are used to aid in controlling Cost of Sales:
- FMS Product Cost Analysis Report
- FMS Daily Ideal Usage Report
- FMS Weekly Worksheet Report
- Bonus Calculation Sheet
- Profit and Loss Statement
- The General Ledger
- Prep Variance Report
- Daily Prep Variance Report
F.Assists the RGM in Managing and Controlling Cost of Labor: Ensures that “Flow-thru” targets/goals are achieved; actual hours used do not exceed the established labor model/matrix; and, team member productivity is maximized. This includes these processes:.
1.Ensuring the accuracy and completeness of team member timekeeping records, including tips and team member meals. Updates team member records as needed.
2. Minimizing edits to clock-in/clock-out transactions by assuring team members properly clock in at the beginning of their shift and clock out at the end of their shift.
3. Assuring team members do not clock in earlier than five (5) minutes prior to their scheduled shift.
4. Assuring the man-hours used for opening and closing the restaurant do not exceed established targets.
5.Analyzing actual labor hours used versus earned allowable labor hours and calculating the variance; and, using this information to appropriately manage labor each shift.
6.Communicating and cooperating with the Home Office Payroll Department to assure accuracy in payroll, including information about new hires, raises, promotions, and terminations.
7.Making appropriate recommendations to the RGM regarding wages within Company guidelines.
8.Eliminating overtime hours for team members who are paid on an hourly basis.
9.Eliminating supplemental tip credit pay.
10.Improving team member productivity using the measurements and tools available through the Company, as well as the following:
- Assuring the Back of the House (BOH) is “optimized”:
- i. Organized … a place for everything, and everything in its place
- ii. Lineal Flow … eliminate or minimize back tracking
- iii. Have all items located closest to the next step in the product assembly process
- iv. Minimize the number of steps taken and the reach needed for all items
- Assuring that team members are thoroughly trained.
- Ensuring that “prep levels’ are adequate for the forecasted volume of business for the day, including: products thawing/tempering; raw product prep; preassembled pizza and other products; and so on.
- Ensuring that food preparation areas, make table, cut table, and service areas are stocked appropriately before each shift and maintained during peak volume periods.
- Ensuring products are prepared quickly in accordance with time standards.
- Ensuring that tables vacated by customers are cleared, cleaned, sanitized and reset quickly.
11. Reduces turnover by managing all aspects of the restaurant professionally and in accordance with Company standards.
12. If the RGM has delegated scheduling to the Shift Manager, the Shift Manager uses established procedures to produce a sales forecast to be used in the scheduling process.
G.Managing Other Operating Expenses and Semi-Variable Expenses to Budget or less.
II. CUSTOMER SATISFACTION
A.Maintains positive customer relations, which includes:
1. Assuring personal behaviors and team member behaviors toward all customers are courteous, attentive, respectful, and enthusiastic.
2. Assuring a comfortable environment for customers.
3. Executing "Floor Management" by directing activities and greeting and interacting with customers on each shift worked.
4. Immediately resolving customer complaints by apologizing first and then assuring the satisfaction of the customer. Complaints may be received in person, by phone, or in writing. Consult with the RGM if the customer is not satisfied with your suggested resolution.
- a. B.L.A.S.T. is the acronym we use for our complaint resolution process:
- Believe the customer
- Listen to the customer
- Apologize to the customer
- Satisfy the customer
- Thank the customer
5. Immediately contacting the RGM (or DM if the RGM is not available immediately) regarding any incidents in which customers are injured or in which customers claim some harm done to them.
B. Ensures customers receive prompt, quality service. This includes:
1. If the RGM has delegated scheduling to the Shift Manager, scheduling the correct number of team members for forecast sales volume; and deploying those Team members in the correct job roles.
2. Following established service guidelines and procedures to assure all Hospitality Standards are achieved.
3. Directing team member activities to assure speed of service standards are met or exceeded, including product preparation times and delivery times.
4. Personally serving customers as required to meet the demand of the volume of business.
5. Ensuring customers are greeted properly and seated as quickly as appropriate.
6. Recognizing and dealing effectively with the special needs of customers.
7. Ensuring that customer orders are taken promptly, prepared accurately, and served quickly.
8. Ensuring customer follow-up, which means servers check back with customers frequently to see if there is anything else needed.
9. Ensuring immediate attention is given to customers ready to pay, either by prompting servers to complete the table cashout procedure or by performing the transaction of cashing out customer as needed.
10. Ensuring the phone is answered promptly and courteously, following the Telephone Service Essentials.
11. Responding to customers at pickup counter and drive-thru window; finding order; collecting money for the order; verifying order to customer; and, thanking customers.
12. Dispatching orders for delivery customers as required to meet the demands of the volume of business, grouping orders by geographical destination and instructing drivers as they arrive and depart which orders to take with them and where to go.
13. Delivering pizzas as necessary to meet the demands of the business.
14. Ensuring customers are thanked for their business.
C.Ensures quality ingredients are used to prepare all products. This includes:
1. Maintaining Food Safe Temperatures for all ingredients and products.
2. Ensuring food preparation utensils and food contact surfaces are property cleaned and sanitized.
3. Ensuring that procedures for receiving, handling and storing ingredients are followed.
4. Recognizing and correcting any raw ingredients or product problems.
5. Maintaining inventory levels which assure product freshness and no outages.
6. Eliminating the potential for cross contamination.
7. Ensuring that proper procedures are followed to prepare ingredients (dough, sauces, meats, cheeses, and vegetables).
8. Ensuring salad bar is maintained according to standards of operation (restaurant only).
9. Personally preparing ingredients as necessary.
D. Ensures quality products, which includes:
1. Planning dough, ingredient and product preparation to meet sales volumes and personally preparing these items, as necessary, to meet the demand of the business.
2. If deemed appropriate by the RGM, performing a product cookability test to verify proper oven and belt speed.
3. Following proper procedures to process customer orders.
4. Personally preparing and cooking menu items as required to meet the demands of the volume of business.
5. Taking every appropriate action, in consultation with the RGM, including driving to another restaurant to pick up product, to resolve outage or potential outage situations.
6. Maintaining inventory levels which assure product freshness and no outages.
7. Planning dough, ingredient and product preparation to meet sales volumes and personally preparing these items, as necessary, to meet the demand of the business.
8. Assuring all products are prepared according to exact specifications, recipes and procedures.
9. Personally preparing and cooking menu items as required to meet the demands of the volume of business.
E.Ensures that all standards for cleanliness and sanitation are met or exceeded, with particular attention to:
1. Restrooms.
2. Table tops; booth backs and seats; and chair seats.
3. Silverware, plateware, and glassware.
4. Dining room floors.
5. Salad bar.
F.Implements new or approved changes in policies, procedures and/or operation standards. This involves:
1. Attending training sessions.
2. Reading "Rollout Guides" or other resources.
3. Assisting the RGM with training restaurant team members of new procedures or changes.
4. Participating in crew training and other actions in the restaurant to assure full and correct implementation.
5. If requested by the RGM, assisting with updating all manuals, resources and job aids as required.
III.PEOPLE
A.Maintains positive team member relations and a positive and productive workplace, which involves:
1. Building relationships with team members based on mutual trust and respect.
2. Communicating and following the Daland “5 Star” Vision and Core Beliefs.
3. Promoting teamwork.
4. Being familiar with benefits available to team members, and referring appropriate questions to the RGM regarding these benefits.
5. Informing the RGM of all team member grievances.
6. Performing correct and consistent administration of team member disciplinary procedures, and discussing all recommended discipline with the RGM.
7. Assuring compliance with various governmental regulations, such as ensuring that all team members are clocked in while working, complying with overtime laws, child labor laws, alcoholic beverage laws, anti-discrimination and anti-harassment laws, FLSA, EEO, etc.
8. Performing consistent administration of and compliance with Company policies and procedures.
9. Communicating effectively with the crew and management team.
10. Assuring team member understanding of the Daland Corporation organization structure and career opportunities within the Company.
B. Assists the RGM with managing the size and quality of staff. The following are responsibilities of the RGM, but if requested by the RGM, the Shift Manager may assist with the following:
1. Planning, recruiting, and hiring to assure a full staff at all times and to assure adequate time for processing MVR's (motor vehicle reports), background checks, etc. Only the RGM is authorized to hire new team members; and Shift Managers are only permitted to interview applicants if authorized by the RGM.
2. Continuously recruiting and taking applications from job candidates.
3. If requested by the RGM, utilizing staffing tools, such as the Pizza Hut Hiring Zone and the team member Assessment; interviewing job candidates; and, checking their references.
4. If requested by the RGM, making recommendations to the RGM regarding the best qualified candidates.
5. Complying with Company employment practices and governmental regulations, including EEO, ADA Title I, etc.
C.Assisting the RGM in training newly hired team members and team members preparing for promotions. This involves:
1. Following Company training policies and meeting Pizza Hut Training Standards.
2. Utilizing on-line training, trainer's guides, checklists, job aids, tests and other training resources to assure a thorough job of training.
3. Using the four step training process of: (1) Preparation (2) Show & Tell; (3) Guided Practice; and (4) Follow-up to assure the trainee can perform all tasks up to required standards prior to being allowed to perform the tasks "solo."
D. Manages team member performance and supervises work. This includes:
1.Utilizing Coaching for Results, which includes:
- a.Activating team member behavior.
- (1)Providing guidance, direction, and reassurance to all team members.
- (2)Communicating non-negotiable standards of performance to team members.
- (3)Conducting team member meetings, group training sessions and Jump Start meetings.
- (4)Assigning Team members tasks from the Opening, Closing and Maintenance checklist.
- (5)Communicating job assignments for each shift to team members and assuring each team member works their assignment.
- (6)Giving instructions to team members that are clear and assure understanding.
- (7)Assigning team members to breaks.
- (8)Sending team members home early if not needed due to business conditions.
- (9)Calling team members in early, or calling extra team members to work to cover unanticipated surges in business volume.
- (10)Assuring all opening, shift, and closing job duties are completed and performed correctly.
- b.Evaluating team member behavior.
- (1)Observing team member performance each shift.
- (2)Working along side team members and assisting in the performance of their tasks, as needed.=
- (3)Monitoring team member meals and signing team member meal guest checks.
- (4)Ensuring adherence to alcoholic beverage laws of the local community
- (5)Conducting regular, written performance appraisals on all subordinates, using the procedure and forms provided by the Company and within the time specified in compensation plans.
- c.Responding to team member behavior with consequences.
- (1)Taking action (corrective or positive reinforcement) to assure team member performance meets or exceeds standards.
- (2)Providing ongoing counseling that gives praise and recognition to team members for jobs well done; identifies areas of performance needing improvement and methods for improving; and, if required, gives reprimands that are job focused.
2.Handling non-routine occurrences/emergencies and informing the RGM of such occurrences/emergencies.
E. Assists RGM with developing promotable team members in his/her restaurant and promotable management for Daland. This includes:
1. Using Company training programs and resources to prepare candidates for promotions and to assure that the management team is 100% certified in management processes, systems, policies, and procedures.
2. Making recommendations to the RGM regarding which team members are eligible for promotion to Shift Manager/Leader.
F. Assists RGM with personnel administration functions, which includes:
1. Assuring team members complete all required personnel documents such as W-4's, I-9's, Team member Acknowledgment, Arbitration Agreement, Delivery Driver Statement, New Driver Checklist, etc.; and, that these required documents are transmitted to the Home Office.
2. Documenting required payroll data for team members, including accurate recording of hours;
3. Managing worker's compensation claims, etc. in accordance with Company policies and procedures.
4. Maintaining personnel files on all team members, which includes filing all personnel documents; recording training dates, vacation dates, evaluation dates, pay increases, and absences; etc.
IV. MARKETING
A.Implements marketing programs to increase business. This includes:
1. Engaging in positive community/public relations for Pizza Hut.
2. Providing input for promotional ideas.
3. Displaying and maintaining Point of Purchase (P.O.P.) and other elements of national, co-op or local marketing programs;
4. Properly executing authorized marketing programs, including new product tests.
5. Taking initiative to recommend new opportunities for increasing business.
V. FACILITIES
A.Maintains a quality environment for our customers and team members. This includes:
1. Conducting routine Preventive Maintenance on the facility and equipment.
2. Taking corrective actions pursuant to the RGM’s safety inspections.
3. Advising the RGM regarding non-routine problems and following up to assure such problems are corrected.
4. Maintaining cleanliness and sanitation in all areas of the restaurant.
5. Organizing all work space to ensure ease of operation.
6. Providing a quality work environment that is safe and complies with all OSHA regulations.
7. Cleaning and organizing refrigeration units.
8. Ensuring floors are clean and free from obstruction.
9. Keeping HVAC vents and filters clean.
10. Ensuring trash is disposed of promptly and according to security procedures.
11. Ensuring parking lot and grounds are free of trash and debris and taking action to correct deficiencies.
12. Ensuring all equipment is used according to proper operational procedures.
13. Keeping restrooms cleaned and stocked.
14. Keeping food prep areas cleaned and sanitized according to approved procedures.
15. Ensuring the daily cleaning and maintenance of all equipment.
16. Correcting any unsafe conditions.
17. Following up to ensure all Scheduled Maintenance and Daily CM&A items are completed.
VI. ADMINISTRATION
A.Effectively manages time, allocating an appropriate amount to each Key Result Area.
B.Manages all paperwork, documentation, written reports, etc. and assures these are always submitted on time and that they are accurate, complete and organized.
C.If requested by the RGM, orders inventory items used in the restaurant. This involves these processes:
1. Review of the Inventory on Hand is performed. The Inventory on Hand is compared to the Weekly Ideal Usage, which is obtained from the Product Cost Analysis report, and a determination is made as to the amount of each particular item to order. The order is then recorded on an order sheet, or is entered into the computer for electronic transfer of order information.
2. Amount ordered of each item may be adjusted upward or downward based on projections of upcoming sales trends, coupon impact, weather changes or other extra-restaurant environmental changes.
3. Calls in orders for supplies on the phone, or electronically submits order via computer.
D.If requested by the RGM, conducts weekly inventory of all food, paper and beverage products used in the unit. This involves these processes:
1. Physically reviewing and counting the inventory on hand (which involves climbing shelves, bending, kneeling, etc.).
2. Rearranging inventory to assure proper rotation (first in, first out) and to make it easier to count and control.
3. Recording amounts of inventory on hand on the inventory form.
E.If requested by the RGM, prepares the weekly labor schedules. This involves these processes:
1. Updating Guest Check Comments file in the restaurant computer to assist in forecasting labor hours.
2. Reviewing Guest Check Comments file and upcoming promotions that may affect sales during the upcoming week.
3. Forecasting anticipated sales volume by shift, by day and by week. The forecast is based on knowledge of any outside events that may influence sales such as coupons, promotions, etc. Particular consideration must be given to how sales are generated--that is, dine-in business contrasted to carry-out business or delivery business.
4. Updating sales forecasts in the FMS (computer system) based on outside events that may influence sales.
5. Reviewing requests for days off that have been turned in by team members and when possible allowing for requested days off.
6. Using experience, past schedules, Black Book information, Guest Check Comments, knowledge of team members' abilities, labor goals, and FMS (computer system) recommended labor schedule to assist in scheduling the proper number of team members each shift to meet sales volume and labor hour guidelines.
7. Obtaining the RGM's approval of the schedule, then posting the final schedule in accordance with Daland Corporation's policies and procedures.
F.Performs daily accounting procedures. This includes these processes:
1. At close of business day requests a sales report from the FMS computer to determine total sales entered into the cash drawers throughout the system.
2. Any cash paidouts or miscellaneous deposits from the day are verified with what is in the system.
3. Cash on hand is counted and reconciled against total sales.
4. Total deposit is calculated, and a deposit is prepared.
5. Dough waste and PPP waste is documented and calculated on the form provided and filed for use in forecasting future prep levels.
6. All gift checks are counted and verified against prior counts less current gift check sales on the Gift Check Tracking form.
G.If requested by the RGM, performs weekly accounting procedures. This includes these processes:
1. Completing, as required, the Weekly Sales Analysis and analyzing it.
2. Completing the Weekly Inventory.
3. Completing the payroll functions.
4. Analyzing the Daily Business Summary Report to determine performance in key measurement areas.
5. Preparing the weekly packet for the home office, using the checklist provided to assure all required items are included.
6. Calling any needed FRS numbers or statistics to the District Manager.
H.Meets all deadlines and assures that subordinates meet their deadlines.
I.Manages all paperwork, documentation, written reports, etc. and assures these are always submitted on time and that they are accurate, complete and organized.
J.Maintains and updates required files, manuals, and reports.
NON-ESSENTIAL FUNCTIONS: The "non-essential" functions are routinely performed by the person holding the Shift Manager's position and they are essential to the effective operation of the restaurant. However, these functions are considered "non-essential" to the position. The Manager on Duty is then accountable for assuring the delegated functions are correctly performed.
A.Receives and stores inventory items used in the unit. This involves these processes:
1. Checking in products as received off delivery vehicles to verify product quality and that amount charged for on the delivery receipt/packing slip is correct when compared to amount received. Signing the delivery receipt/packing slips for amount of goods received.
2. Using a two-wheeled hand truck, assists and oversees other employees in proper storage of products. Weight of items varies. Generally, more than one person is available to perform this task.
3. Entering on inventory screen of the computer the amount and cost of each product item received as noted on the delivery receipt/packing slip.
MINIMUM QUALIFICATIONS/REQUIREMENTS: The following are the qualifications and minimum requirements necessary for a person to perform this job.
A.Ability to work a minimum of three (3) days and at least 30 hours per week, but must be available to work more than 30 hours per week if necessary due to business necessity. In addition to having the flexibility to work a variety of shifts, including late nights and weekends.
B.Valid driver's license, insurance and automobile. Position involves taking large amounts of cash receipts to the bank at different times of the day including at night. Banks are generally at a distance requiring a person to drive to the bank. Position may also need automobile to pick up product, make pizza deliveries, etc.
C.Able and willing to travel. Position requires occasional travel for training, new store openings and meetings, which may be held at a distance from home not feasible to drive daily. Overnight stays at an out-of-town location may be required during the training sessions, new store opening, and meetings for up to one week at a time.
D.Telephone (cellular or land line) at residence. There are circumstances that may arise at the restaurant of which the manager must be informed while off duty.
E.Sufficient physical agility to perform the functions of the position. This includes these processes:
1. Sufficient physical strength to lift most items used in the operation of the restaurant.
2. Sufficient communication skills. Position involves communicating with team members, superiors and customers.
3. Ability to move at a fairly quick pace and to remain stationary for periods of six to eight hours at a time. The position requires person to perform all of the above at different times and intervals as needed by the realities of the environment and the position.
F.Ability to maintain a state of self-composure under conditions of stress and anxiety. Position routinely involves stress resulting from work overload, role ambiguity, conflicting demands from various customers, and team members. Person in this position must be able to function effectively under these conditions.
G.Previous experience with this Company as a Shift Manager/Leader; or previous restaurant management experience with another Company.
H.Sufficient mental and cognitive ability to perform the calculations and fill in the sales and product tracking forms used by the Company. Estimate is that ability to read, write and perform arithmetic procedures at the 12th grade level will be sufficient.
I.Ability to perform all of the duties of the hourly team members and supervisors under this person's supervision. As time and circumstances dictate the person in this position may have to assist or take over the duties of an hourly team member in order to expedite good customer service. Also necessary in order to train new team members in this function.
J.Ability to communicate effectively with a large variety of persons with diverse backgrounds. Position is one where incumbent provides direction and supervision to a variety of subordinates with diverse levels of education, differences in ages, and experience. Must be able to express ideas and concepts to these persons to assure teamwork through organization and leadership.
EQUIPMENT USED:
Standard restaurant office equipment such as calculator, telephone, and computer.
"Pizza Wheel". This is a device with a handle and a round stainless steel blade that is used to cut certain types of pizza dough crusts.
"Rocker Knife". This is a device about two feet long with a stainless steel handle that extends across the top of a stainless steel blade fashioned in a curve. It is used to cut certain types of pizzas by placing on the pizza and rocking the blade across the pizza surface.
"Vegetable Chopper". This is a hand operated mechanical device used to slice whole raw vegetables into smaller pieces for use on the make table.
"Crock". A generic term used to describe a variety of containers used to hold food items served on a salad bar. Knives, spoons, spatulas and other common utensils.
"Make Table". An open topped, refrigerated, compartmented table for the storage of food items used in the preparation of products for customer orders. Has doors which allow access to interior refrigerated section below the table top where additional food items are stored as back-up for the items stored on top of the table.
"Cut Table". A stainless steel table where cooked pizzas are cut into slices and where other products are assembled prior to serving them to the customer.
"Oven". A power driven device operating at high temperatures used to bake food products.
"Automatic Dishwasher". A mechanical device consisting of: (1) a dirty dish/rinse table, used to rinse and prepare dishes for washing; (2) dishwasher compartment, where dishes are washed with hot water, soap, sanitizing chemical and pressurized water; and, (3) clean dish/drain table, where clean dishes drain, dry and are sorted for storage.
"Dough Proofer". A metal cabinet heated to approximately 95 degrees Fahrenheit, in which panned dough is placed to obtain the correct rise in the dough.
"Three Compartment Sink". A stainless steel sink, separated into three compartments used to wash, rinse and sanitize all kitchen tools, and smallwares not washed in the automatic dishwasher.
"Pan Gripper". This is a mechanical device used to grip certain types of pizza pans for purposes of lifting or carrying when they have been heated to a high temperature.
"Portion Cups". These are pre-measured cups used by Pizza Hut restaurants for portioning cheese and toppings for pizzas.
"Scales". This is a small table model scale used to weigh and portion ingredients used in the recipes of various products.
"Pan Separators". These are plastic items, of varying shape, diameter and circumference, used to separate pans filled with dough to protect the dough inside the pan from contamination and to allow pans to be stacked for storage.
"Dough Perforator". This is a mechanical device consisting of a handle attached to a small wheeled drum that is dotted with metal protrusions. It is used to perforate certain types of dough prior to topping to prevent formation of bubbles during baking.
"Cutting Board". This is a hard surface board, rectangular or square in shape, on which pizzas and other food products are cut.
"Reach In". A refrigerated piece of equipment with doors which open to allow dough or pizza ingredients to be stored inside for easy access.
"Scraper Block". A device with a stainless steel blade and a wooden handle in a rectangular shape used to cut dough for portioning, and scraping the make table/cut table surfaces off for cleaning.
"Prep Table". A table about 34 to 36 inches high, with a stainless steel top. The table is used as a work surface for the preparation of many ingredient items used in the Pizza Hut.
“Kitchen and Dining Utensils". Such as knives, spoons, spatulas, etc.
"Plates, Bowls, Mugs, Tumblers". and other items to serve food and beverages to customers.
"Spoon". A stainless steel device with a long handle and a curved end used for applying sauce to prepared dough.
"Pan". A round metal device with a raised edge for holding dough prior to topping and baking.
"Walk-in". A refrigerated compartment of sufficient size to allow the individual to actually walk into the refrigerated compartment to obtain or store perishable items. Compartment may be sufficiently cold to freeze items.
"Freezer". A refrigerated box maintained at sufficient cold temperatures so as to freeze items stored inside.
"Ice Machine". A device that automatically receives water, freezes it, and stores it as ice in an attached storage bin.
"Soda Dispenser" (pop machine). A device that mixes syrup and carbonated water and dispenses carbonated soft beverage (soda, pop).
"Point of Sale Computer". Electronic device used in tracking orders, inventory, payroll information. Contains cash drawer used to make change for customer transactions, track paidouts, delivery orders, dispatching.
"FMS" Field Management System. Software used on the point of sale computer that provides management information necessary in managing the day to day operations of the restaurant.
Miscellaneous equipment such as a telephone, carry-out boxes and bags, hand towels, etc.
Serving tray, ticket book, bus tub, flatware and other small items.
Note: Many restaurants have additional equipment such as beer boxes, spaghetti magic machine, etc.
PLACES WHERE WORK IS PERFORMED: This work is performed on the employer's premises. Location of premises may vary throughout the employer's Company. This job description was developed by observing the work in process and from information provided by the management of Daland Corporation.
The Shift Manager reports directly to the RGM, and holds the second highest position in the restaurant if there is not an Assistant Manager.
In restaurants with an Assistant Manager, the Shift Manager is the next highest position.
ESSENTIAL FUNCTIONS: The following accountabilities are essential to this position and a high degree of performance must be achieved in each in order for the incumbent to be successful.
These accountabilities are organized according to our six Key Result Areas.
When the word "policies" or the phrase "policies and procedures" or similar language is used in any of the Company's documents, the term refers to all policy and procedure bulletins, manuals, training materials, memoranda, newsletters, communications on the "Document Viewer" on the computer, and all other documents and oral discussions with team members' supervisors, which relate to the restaurant.
The management team shall be responsible for ensuring that all team members, including the manager himself/herself, comply with all Company policies and procedures and all Pizza Hut standards at all times and take immediate steps to correct actions not in accordance with such policies, procedures and standards.
I.
PROFITABILITY A.Planning 1.Executes the RGM's plans and overall Daland Corporation plans to achieve consistent sales growth and profit growth.
2.Achieves planned/budgeted profits, as communicated by the RGM.
This involves:
- a.Using established control systems and procedures to measure actual results and to identify deviations from planned results.
- b.Assisting the RGM, as requested, in developing and implementing corrective action plans to assure actual results conform to plan.
B.Policies: Complies with all Company policies and procedures, including but not limited to, those relating to inventory, cash, payroll, food handling, interactions with guests, team members, and vendors, and legal compliance.
C.Manages and Controls Cash: In conjunction with the RGM and other managers, ensures that that all cash and checks, minus the change fund is correctly deposited, credit card transactions are correctly settled, and cash over or short is minimized.
1.
Performs Banking Transactions
- a.
Assures that two deposits daily are prepared and deposited in the bank (more than two may be required in higher volume units.)
- i.
The intent of the first deposit is to remove from the unit an amount approximately equal to the total of cash plus checks, minus the amount of the change fund.
- ii.
The first deposit is to be made after 4:00 p.m., when the opening manager is ready to leave for the day.
- iii.
The final deposit will be all remaining cash plus checks, minus the change fund.
- iv.
The managers may take such deposits to the bank, using his/her personal vehicle, and depending on the time of day, make the deposit in the bank lobby or in the night depository.
- v.
Assure the "Weekly Deposit Log" is completed for each deposit made.
- b.
If requested by the RGM, the other managers shall perform the following tasks.
These are the responsibility of the RGM, but may be delegated to other managers.
- i.
Picks up validated deposit slips at the bank.
- ii.
Verifies bank validated deposit amounts to sales and cash reports as well as the "Weekly Deposit Log," and assures all appropriate signatures are on the "Weekly Deposit Log".
- iii.
Sends a copy of the "Weekly Deposit Log" to the Home Office with all other weekly paperwork.
D.Controls cash drawers and team member "banks", following all established manual and computer procedures.
1.
Establishes the correct number of cash drawers.
Number of cash drawers in use at one time may vary from one to four depending on size of the restaurant, sales volume, method of delivering services to customer.
Amount of cash in each drawer is recorded and kept in the drawer for the duration of the shift, or until "dropped" from the cash drawer to the safe.
2.
Establishes cash banks for delivery drivers.
3.
As needed, will operate cash drawer following established procedures for cash drawer operation.
4.
As necessary, money is removed from cash drawers from time to time and secured in the safe.
5.
Throughout the shift, cash drawer transactions, such as paid outs, miscellaneous receipts (paid ins), discounts and promotions are properly accounted for, including all documentation; transactions are properly entered into the computer; and, all documentation is organized and secured for transmitting to the Home Office.
6.
Assures cash drawers are counted and balanced at the end of each shift or when there is a change in cashiers.
7.
Records tips for servers and drivers on credit card/gift card transactions and correctly settles all credit card/gift card transactions.
8.
Inform the RGM anytime cash short exceeds $5 for a day.
9.
Reviews reports and otherwise takes actions to ensure that team members properly report actual sales and actual tips, and ensures that team members do not falsify credit card receipts or other Company documents.
This requires due diligence on the part of the managers.
E.Assists the RGM in Managing and Controlling Cost of Sales: The actual cost per the P&L must be equal to or between Ideal Cost and Allowable Cost as calculated in the Product Cost Analysis report and Bonus Calculation Sheet.
This includes these processes: 1.Utilizes manuals and/or automated procedures approved by the Company, orders all approved products used in the restaurant.
2.Properly accepts deliveries and properly stores inventory items used in the restaurant.
This involves these processes:
- a.Checks in products as received off of delivery vehicles to verity product quality and verifies that amounts charged for on delivery receipt/packing slips are for amount of goods received.
- b.Uses a two-wheeled hand truck to unload and products, assists and oversees other team members in proper storage of products.
Weight of items varies from 10 to 50 pounds.
Full load on two-wheeled hand truck may exceed 500 pounds.
Generally, ensures that more than one person is available to perform this task.
- c."Autoposts" inventory received, or enters on inventory record the amount and cost of each product item received, as noted on delivery receipt/packing slip.
3.Accurately accounts for all product coming into the restaurant, used to prepare products, or transferred out of the restaurant.
4.Assures the proper execution of all recipes and specifications for preparing ingredients and assembling products.
5.Manages waste which involves maintaining a FIFO (First In, First Out) system and marking all products with a Made
- Ready
- Discard label.
6.Assures the correct order entry procedures are followed by all order takers.
7.Assures compliance with team member consumption policies.
8.Performs a Daily Product Usage Analysis on critical inventory items to assure usage meets guidelines.
9.Communicates goals to team members and follows up with team members to ensure goals are being met.
10.The following tools are used to aid in controlling Cost of Sales:
- FMS Product Cost Analysis Report
- FMS Daily Ideal Usage Report
- FMS Weekly Worksheet Report
- Bonus Calculation Sheet
- Profit and Loss Statement
- The General Ledger
- Prep Variance Report
- Daily Prep Variance Report F.Assists the RGM in Managing and Controlling Cost of Labor: Ensures that "Flow-thru" targets/goals are achieved; actual hours used do not exceed the established labor model/matrix; and, team member productivity is maximized.
This includes these processes:.
1.Ensuring the accuracy and completeness of team member timekeeping records, including tips and team member meals.
Updates team member records as needed.
2.
Minimizing edits to clock-in/clock-out transactions by assuring team members properly clock in at the beginning of their shift and clock out at the end of their shift.
3.
Assuring team members do not clock in earlier than five (5) minutes prior to their scheduled shift.
4.
Assuring the man-hours used for opening and closing the restaurant do not exceed established targets.
5.Analyzing actual labor hours used versus earned allowable labor hours and calculating the variance; and, using this information to appropriately manage labor each shift.
6.Communicating and cooperating with the Home Office Payroll Department to assure accuracy in payroll, including information about new hires, raises, promotions, and terminations.
7.Making appropriate recommendations to the RGM regarding wages within Company guidelines.
8.Eliminating overtime hours for team members who are paid on an hourly basis.
9.Eliminating supplemental tip credit pay.
10.Improving team member productivity using the measurements and tools available through the Company, as well as the following:
- Assuring the Back of the House (BOH) is "optimized":
- i.
Organized … a place for everything, and everything in its place
- ii.
Lineal Flow … eliminate or minimize back tracking
- iii.
Have all items located closest to the next step in the product assembly process
- iv.
Minimize the number of steps taken and the reach needed for all items
- Assuring that team members are thoroughly trained.
- Ensuring that "prep levels' are adequate for the forecasted volume of business for the day, including: products thawing/tempering; raw product prep; preassembled pizza and other products; and so on.
- Ensuring that food preparation areas, make table, cut table, and service areas are stocked appropriately before each shift and maintained during peak volume periods.
- Ensuring products are prepared quickly in accordance with time standards.
- Ensuring that tables vacated by customers are cleared, cleaned, sanitized and reset quickly.
11.
Reduces turnover by managing all aspects of the restaurant professionally and in accordance with Company standards.
12.
If the RGM has delegated scheduling to the Shift Manager, the Shift Manager uses established procedures to produce a sales forecast to be used in the scheduling process.
G.Managing Other Operating Expenses and Semi-Variable Expenses to Budget or less.
II.
CUSTOMER SATISFACTION A.Maintains positive customer relations, which includes: 1.
Assuring personal behaviors and team member behaviors toward all customers are courteous, attentive, respectful, and enthusiastic.
2.
Assuring a comfortable environment for customers.
3.
Executing "Floor Management" by directing activities and greeting and interacting with customers on each shift worked.
4.
Immediately resolving customer complaints by apologizing first and then assuring the satisfaction of the customer.
Complaints may be received in person, by phone, or in writing.
Consult with the RGM if the customer is not satisfied with your suggested resolution.
- a.
B.L.A.S.T.
is the acronym we use for our complaint resolution process:
- Believe the customer
- Listen to the customer
- Apologize to the customer
- Satisfy the customer
- Thank the customer 5.
Immediately contacting the RGM (or DM if the RGM is not available immediately) regarding any incidents in which customers are injured or in which customers claim some harm done to them.
B.
Ensures customers receive prompt, quality service.
This includes: 1.
If the RGM has delegated scheduling to the Shift Manager, scheduling the correct number of team members for forecast sales volume; and deploying those Team members in the correct job roles.
2.
Following established service guidelines and procedures to assure all Hospitality Standards are achieved.
3.
Directing team member activities to assure speed of service standards are met or exceeded, including product preparation times and delivery times.
4.
Personally serving customers as required to meet the demand of the volume of business.
5.
Ensuring customers are greeted properly and seated as quickly as appropriate.
6.
Recognizing and dealing effectively with the special needs of customers.
7.
Ensuring that customer orders are taken promptly, prepared accurately, and served quickly.
8.
Ensuring customer follow-up, which means servers check back with customers frequently to see if there is anything else needed.
9.
Ensuring immediate attention is given to customers ready to pay, either by prompting servers to complete the table cashout procedure or by performing the transaction of cashing out customer as needed.
10.
Ensuring the phone is answered promptly and courteously, following the Telephone Service Essentials.
11.
Responding to customers at pickup counter and drive-thru window; finding order; collecting money for the order; verifying order to customer; and, thanking customers.
12.
Dispatching orders for delivery customers as required to meet the demands of the volume of business, grouping orders by geographical destination and instructing drivers as they arrive and depart which orders to take with them and where to go.
13.
Delivering pizzas as necessary to meet the demands of the business.
14.
Ensuring customers are thanked for their business.
C.Ensures quality ingredients are used to prepare all products.
This includes: 1.
Maintaining Food Safe Temperatures for all ingredients and products.
2.
Ensuring food preparation utensils and food contact surfaces are property cleaned and sanitized.
3.
Ensuring that procedures for receiving, handling and storing ingredients are followed.
4.
Recognizing and correcting any raw ingredients or product problems.
5.
Maintaining inventory levels which assure product freshness and no outages.
6.
Eliminating the potential for cross contamination.
7.
Ensuring that proper procedures are followed to prepare ingredients (dough, sauces, meats, cheeses, and vegetables).
8.
Ensuring salad bar is maintained according to standards of operation (restaurant only).
9.
Personally preparing ingredients as necessary.
D.
Ensures quality products, which includes: 1.
Planning dough, ingredient and product preparation to meet sales volumes and personally preparing these items, as necessary, to meet the demand of the business.
2.
If deemed appropriate by the RGM, performing a product cookability test to verify proper oven and belt speed.
3.
Following proper procedures to process customer orders.
4.
Personally preparing and cooking menu items as required to meet the demands of the volume of business.
5.
Taking every appropriate action, in consultation with the RGM, including driving to another restaurant to pick up product, to resolve outage or potential outage situations.
6.
Maintaining inventory levels which assure product freshness and no outages.
7.
Planning dough, ingredient and product preparation to meet sales volumes and personally preparing these items, as necessary, to meet the demand of the business.
8.
Assuring all products are prepared according to exact specifications, recipes and procedures.
9.
Personally preparing and cooking menu items as required to meet the demands of the volume of business.
E.Ensures that all standards for cleanliness and sanitation are met or exceeded, with particular attention to: 1.
Restrooms.
2.
Table tops; booth backs and seats; and chair seats.
3.
Silverware, plateware, and glassware.
4.
Dining room floors.
5.
Salad bar.
F.Implements new or approved changes in policies, procedures and/or operation standards.
This involves: 1.
Attending training sessions.
2.
Reading "Rollout Guides" or other resources.
3.
Assisting the RGM with training restaurant team members of new procedures or changes.
4.
Participating in crew training and other actions in the restaurant to assure full and correct implementation.
5.
If requested by the RGM, assisting with updating all manuals, resources and job aids as required.
III.PEOPLE A.Maintains positive team member relations and a positive and productive workplace, which involves: 1.
Building relationships with team members based on mutual trust and respect.
2.
Communicating and following the Daland "5 Star" Vision and Core Beliefs.
3.
Promoting teamwork.
4.
Being familiar with benefits available to team members, and referring appropriate questions to the RGM regarding these benefits.
5.
Informing the RGM of all team member grievances.
6.
Performing correct and consistent administration of team member disciplinary procedures, and discussing all recommended discipline with the RGM.
7.
Assuring compliance with various governmental regulations, such as ensuring that all team members are clocked in while working, complying with overtime laws, child labor laws, alcoholic beverage laws, anti-discrimination and anti-harassment laws, FLSA, EEO, etc.
8.
Performing consistent administration of and compliance with Company policies and procedures.
9.
Communicating effectively with the crew and management team.
10.
Assuring team member understanding of the Daland Corporation organization structure and career opportunities within the Company.
B.
Assists the RGM with managing the size and quality of staff.
The following are responsibilities of the RGM, but if requested by the RGM, the Shift Manager may assist with the following: 1.
Planning, recruiting, and hiring to assure a full staff at all times and to assure adequate time for processing MVR's (motor vehicle reports), background checks, etc.
Only the RGM is authorized to hire new team members; and Shift Managers are only permitted to interview applicants if authorized by the RGM.
2.
Continuously recruiting and taking applications from job candidates.
3.
If requested by the RGM, utilizing staffing tools, such as the Pizza Hut Hiring Zone and the team member Assessment; interviewing job candidates; and, checking their references.
4.
If requested by the RGM, making recommendations to the RGM regarding the best qualified candidates.
5.
Complying with Company employment practices and governmental regulations, including EEO, ADA Title I, etc.
C.Assisting the RGM in training newly hired team members and team members preparing for promotions.
This involves: 1.
Following Company training policies and meeting Pizza Hut Training Standards.
2.
Utilizing on-line training, trainer's guides, checklists, job aids, tests and other training resources to assure a thorough job of training.
3.
Using the four step training process of: (1) Preparation (2) Show & Tell; (3) Guided Practice; and (4) Follow-up to assure the trainee can perform all tasks up to required standards prior to being allowed to perform the tasks "solo." D.
Manages team member performance and supervises work.
This includes: 1.Utilizing Coaching for Results, which includes:
- a.Activating team member behavior.
- (1)Providing guidance, direction, and reassurance to all team members.
- (2)Communicating non-negotiable standards of performance to team members.
- (3)Conducting team member meetings, group training sessions and Jump Start meetings.
- (4)Assigning Team members tasks from the Opening, Closing and Maintenance checklist.
- (5)Communicating job assignments for each shift to team members and assuring each team member works their assignment.
- (6)Giving instructions to team members that are clear and assure understanding.
- (7)Assigning team members to breaks.
- (8)Sending team members home early if not needed due to business conditions.
- (9)Calling team members in early, or calling extra team members to work to cover unanticipated surges in business volume.
- (10)Assuring all opening, shift, and closing job duties are completed and performed correctly.
- b.Evaluating team member behavior.
- (1)Observing team member performance each shift.
- (2)Working along side team members and assisting in the performance of their tasks, as needed.=
- (3)Monitoring team member meals and signing team member meal guest checks.
- (4)Ensuring adherence to alcoholic beverage laws of the local community
- (5)Conducting regular, written performance appraisals on all subordinates, using the procedure and forms provided by the Company and within the time specified in compensation plans.
- c.Responding to team member behavior with consequences.
- (1)Taking action (corrective or positive reinforcement) to assure team member performance meets or exceeds standards.
- (2)Providing ongoing counseling that gives praise and recognition to team members for jobs well done; identifies areas of performance needing improvement and methods for improving; and, if required, gives reprimands that are job focused.
2.Handling non-routine occurrences/emergencies and informing the RGM of such occurrences/emergencies.
E.
Assists RGM with developing promotable team members in his/her restaurant and promotable management for Daland.
This includes: 1.
Using Company training programs and resources to prepare candidates for promotions and to assure that the management team is 100% certified in management processes, systems, policies, and procedures.
2.
Making recommendations to the RGM regarding which team members are eligible for promotion to Shift Manager/Leader.
F.
Assists RGM with personnel administration functions, which includes: 1.
Assuring team members complete all required personnel documents such as W-4's, I-9's, Team member Acknowledgment, Arbitration Agreement, Delivery Driver Statement, New Driver Checklist, etc.; and, that these required documents are transmitted to the Home Office.
2.
Documenting required payroll data for team members, including accurate recording of hours; 3.
Managing worker's compensation claims, etc.
in accordance with Company policies and procedures.
4.
Maintaining personnel files on all team members, which includes filing all personnel documents; recording training dates, vacation dates, evaluation dates, pay increases, and absences; etc.
IV.
MARKETING A.Implements marketing programs to increase business.
This includes: 1.
Engaging in positive community/public relations for Pizza Hut.
2.
Providing input for promotional ideas.
3.
Displaying and maintaining Point of Purchase (P.O.P.) and other elements of national, co-op or local marketing programs; 4.
Properly executing authorized marketing programs, including new product tests.
5.
Taking initiative to recommend new opportunities for increasing business.
V.
FACILITIES A.Maintains a quality environment for our customers and team members.
This includes: 1.
Conducting routine Preventive Maintenance on the facility and equipment.
2.
Taking corrective actions pursuant to the RGM's safety inspections.
3.
Advising the RGM regarding non-routine problems and following up to assure such problems are corrected.
4.
Maintaining cleanliness and sanitation in all areas of the restaurant.
5.
Organizing all work space to ensure ease of operation.
6.
Providing a quality work environment that is safe and complies with all OSHA regulations.
7.
Cleaning and organizing refrigeration units.
8.
Ensuring floors are clean and free from obstruction.
9.
Keeping HVAC vents and filters clean.
10.
Ensuring trash is disposed of promptly and according to security procedures.
11.
Ensuring parking lot and grounds are free of trash and debris and taking action to correct deficiencies.
12.
Ensuring all equipment is used according to proper operational procedures.
13.
Keeping restrooms cleaned and stocked.
14.
Keeping food prep areas cleaned and sanitized according to approved procedures.
15.
Ensuring the daily cleaning and maintenance of all equipment.
16.
Correcting any unsafe conditions.
17.
Following up to ensure all Scheduled Maintenance and Daily CM&A items are completed.
VI.
ADMINISTRATION A.Effectively manages time, allocating an appropriate amount to each Key Result Area.
B.Manages all paperwork, documentation, written reports, etc.
and assures these are always submitted on time and that they are accurate, complete and organized.
C.If requested by the RGM, orders inventory items used in the restaurant.
This involves these processes: 1.
Review of the Inventory on Hand is performed.
The Inventory on Hand is compared to the Weekly Ideal Usage, which is obtained from the Product Cost Analysis report, and a determination is made as to the amount of each particular item to order.
The order is then recorded on an order sheet, or is entered into the computer for electronic transfer of order information.
2.
Amount ordered of each item may be adjusted upward or downward based on projections of upcoming sales trends, coupon impact, weather changes or other extra-restaurant environmental changes.
3.
Calls in orders for supplies on the phone, or electronically submits order via computer.
D.If requested by the RGM, conducts weekly inventory of all food, paper and beverage products used in the unit.
This involves these processes: 1.
Physically reviewing and counting the inventory on hand (which involves climbing shelves, bending, kneeling, etc.).
2.
Rearranging inventory to assure proper rotation (first in, first out) and to make it easier to count and control.
3.
Recording amounts of inventory on hand on the inventory form.
E.If requested by the RGM, prepares the weekly labor schedules.
This involves these processes: 1.
Updating Guest Check Comments file in the restaurant computer to assist in forecasting labor hours.
2.
Reviewing Guest Check Comments file and upcoming promotions that may affect sales during the upcoming week.
3.
Forecasting anticipated sales volume by shift, by day and by week.
The forecast is based on knowledge of any outside events that may influence sales such as coupons, promotions, etc.
Particular consideration must be given to how sales are generated--that is, dine-in business contrasted to carry-out business or delivery business.
4.
Updating sales forecasts in the FMS (computer system) based on outside events that may influence sales.
5.
Reviewing requests for days off that have been turned in by team members and when possible allowing for requested days off.
6.
Using experience, past schedules, Black Book information, Guest Check Comments, knowledge of team members' abilities, labor goals, and FMS (computer system) recommended labor schedule to assist in scheduling the proper number of team members each shift to meet sales volume and labor hour guidelines.
7.
Obtaining the RGM's approval of the schedule, then posting the final schedule in accordance with Daland Corporation's policies and procedures.
F.Performs daily accounting procedures.
This includes these processes: 1.
At close of business day requests a sales report from the FMS computer to determine total sales entered into the cash drawers throughout the system.
2.
Any cash paidouts or miscellaneous deposits from the day are verified with what is in the system.
3.
Cash on hand is counted and reconciled against total sales.
4.
Total deposit is calculated, and a deposit is prepared.
5.
Dough waste and PPP waste is documented and calculated on the form provided and filed for use in forecasting future prep levels.
6.
All gift checks are counted and verified against prior counts less current gift check sales on the Gift Check Tracking form.
G.If requested by the RGM, performs weekly accounting procedures.
This includes these processes: 1.
Completing, as required, the Weekly Sales Analysis and analyzing it.
2.
Completing the Weekly Inventory.
3.
Completing the payroll functions.
4.
Analyzing the Daily Business Summary Report to determine performance in key measurement areas.
5.
Preparing the weekly packet for the home office, using the checklist provided to assure all required items are included.
6.
Calling any needed FRS numbers or statistics to the District Manager.
H.Meets all deadlines and assures that subordinates meet their deadlines.
I.Manages all paperwork, documentation, written reports, etc.
and assures these are always submitted on time and that they are accurate, complete and organized.
J.Maintains and updates required files, manuals, and reports.
NON-ESSENTIAL FUNCTIONS: The "non-essential" functions are routinely performed by the person holding the Shift Manager's position and they are essential to the effective operation of the restaurant.
However, these functions are considered "non-essential" to the position.
The Manager on Duty is then accountable for assuring the delegated functions are correctly performed.
A.Receives and stores inventory items used in the unit.
This involves these processes: 1.
Checking in products as received off delivery vehicles to verify product quality and that amount charged for on the delivery receipt/packing slip is correct when compared to amount received.
Signing the delivery receipt/packing slips for amount of goods received.
2.
Using a two-wheeled hand truck, assists and oversees other employees in proper storage of products.
Weight of items varies.
Generally, more than one person is available to perform this task.
3.
Entering on inventory screen of the computer the amount and cost of each product item received as noted on the delivery receipt/packing slip.
MINIMUM QUALIFICATIONS/REQUIREMENTS: The following are the qualifications and minimum requirements necessary for a person to perform this job.
A.Ability to work a minimum of three (3) days and at least 30 hours per week, but must be available to work more than 30 hours per week if necessary due to business necessity.
In addition to having the flexibility to work a variety of shifts, including late nights and weekends.
B.Valid driver's license, insurance and automobile.
Position involves taking large amounts of cash receipts to the bank at different times of the day including at night.
Banks are generally at a distance requiring a person to drive to the bank.
Position may also need automobile to pick up product, make pizza deliveries, etc.
C.Able and willing to travel.
Position requires occasional travel for training, new store openings and meetings, which may be held at a distance from home not feasible to drive daily.
Overnight stays at an out-of-town location may be required during the training sessions, new store opening, and meetings for up to one week at a time.
D.Telephone (cellular or land line) at residence.
There are circumstances that may arise at the restaurant of which the manager must be informed while off duty.
E.Sufficient physical agility to perform the functions of the position.
This includes these processes: 1.
Sufficient physical strength to lift most items used in the operation of the restaurant.
2.
Sufficient communication skills.
Position involves communicating with team members, superiors and customers.
3.
Ability to move at a fairly quick pace and to remain stationary for periods of six to eight hours at a time.
The position requires person to perform all of the above at different times and intervals as needed by the realities of the environment and the position.
F.Ability to maintain a state of self-composure under conditions of stress and anxiety.
Position routinely involves stress resulting from work overload, role ambiguity, conflicting demands from various customers, and team members.
Person in this position must be able to function effectively under these conditions.
G.Previous experience with this Company as a Shift Manager/Leader; or previous restaurant management experience with another Company.
H.Sufficient mental and cognitive ability to perform the calculations and fill in the sales and product tracking forms used by the Company.
Estimate is that ability to read, write and perform arithmetic procedures at the 12th grade level will be sufficient.
I.Ability to perform all of the duties of the hourly team members and supervisors under this person's supervision.
As time and circumstances dictate the person in this position may have to assist or take over the duties of an hourly team member in order to expedite good customer service.
Also necessary in order to train new team members in this function.
J.Ability to communicate effectively with a large variety of persons with diverse backgrounds.
Position is one where incumbent provides direction and supervision to a variety of subordinates with diverse levels of education, differences in ages, and experience.
Must be able to express ideas and concepts to these persons to assure teamwork through organization and leadership.
EQUIPMENT USED: Standard restaurant office equipment such as calculator, telephone, and computer.
"Pizza Wheel".
This is a device with a handle and a round stainless steel blade that is used to cut certain types of pizza dough crusts.
"Rocker Knife".
This is a device about two feet long with a stainless steel handle that extends across the top of a stainless steel blade fashioned in a curve.
It is used to cut certain types of pizzas by placing on the pizza and rocking the blade across the pizza surface.
"Vegetable Chopper".
This is a hand operated mechanical device used to slice whole raw vegetables into smaller pieces for use on the make table.
"Crock".
A generic term used to describe a variety of containers used to hold food items served on a salad bar.
Knives, spoons, spatulas and other common utensils.
"Make Table".
An open topped, refrigerated, compartmented table for the storage of food items used in the preparation of products for customer orders.
Has doors which allow access to interior refrigerated section below the table top where additional food items are stored as back-up for the items stored on top of the table.
"Cut Table".
A stainless steel table where cooked pizzas are cut into slices and where other products are assembled prior to serving them to the customer.
"Oven".
A power driven device operating at high temperatures used to bake food products.
"Automatic Dishwasher".
A mechanical device consisting of: (1) a dirty dish/rinse table, used to rinse and prepare dishes for washing; (2) dishwasher compartment, where dishes are washed with hot water, soap, sanitizing chemical and pressurized water; and, (3) clean dish/drain table, where clean dishes drain, dry and are sorted for storage.
"Dough Proofer".
A metal cabinet heated to approximately 95 degrees Fahrenheit, in which panned dough is placed to obtain the correct rise in the dough.
"Three Compartment Sink".
A stainless steel sink, separated into three compartments used to wash, rinse and sanitize all kitchen tools, and smallwares not washed in the automatic dishwasher.
"Pan Gripper".
This is a mechanical device used to grip certain types of pizza pans for purposes of lifting or carrying when they have been heated to a high temperature.
"Portion Cups".
These are pre-measured cups used by Pizza Hut restaurants for portioning cheese and toppings for pizzas.
"Scales".
This is a small table model scale used to weigh and portion ingredients used in the recipes of various products.
"Pan Separators".
These are plastic items, of varying shape, diameter and circumference, used to separate pans filled with dough to protect the dough inside the pan from contamination and to allow pans to be stacked for storage.
"Dough Perforator".
This is a mechanical device consisting of a handle attached to a small wheeled drum that is dotted with metal protrusions.
It is used to perforate certain types of dough prior to topping to prevent formation of bubbles during baking.
"Cutting Board".
This is a hard surface board, rectangular or square in shape, on which pizzas and other food products are cut.
"Reach In".
A refrigerated piece of equipment with doors which open to allow dough or pizza ingredients to be stored inside for easy access.
"Scraper Block".
A device with a stainless steel blade and a wooden handle in a rectangular shape used to cut dough for portioning, and scraping the make table/cut table surfaces off for cleaning.
"Prep Table".
A table about 34 to 36 inches high, with a stainless steel top.
The table is used as a work surface for the preparation of many ingredient items used in the Pizza Hut.
"Kitchen and Dining Utensils".
Such as knives, spoons, spatulas, etc.
"Plates, Bowls, Mugs, Tumblers".
and other items to serve food and beverages to customers.
"Spoon".
A stainless steel device with a long handle and a curved end used for applying sauce to prepared dough.
"Pan".
A round metal device with a raised edge for holding dough prior to topping and baking.
"Walk-in".
A refrigerated compartment of sufficient size to allow the individual to actually walk into the refrigerated compartment to obtain or store perishable items.
Compartment may be sufficiently cold to freeze items.
"Freezer".
A refrigerated box maintained at sufficient cold temperatures so as to freeze items stored inside.
"Ice Machine".
A device that automatically receives water, freezes it, and stores it as ice in an attached storage bin.
"Soda Dispenser" (pop machine).
A device that mixes syrup and carbonated water and dispenses carbonated soft beverage (soda, pop).
"Point of Sale Computer".
Electronic device used in tracking orders, inventory, payroll information.
Contains cash drawer used to make change for customer transactions, track paidouts, delivery orders, dispatching.
"FMS" Field Management System.
Software used on the point of sale computer that provides management information necessary in managing the day to day operations of the restaurant.
Miscellaneous equipment such as a telephone, carry-out boxes and bags, hand towels, etc.
Serving tray, ticket book, bus tub, flatware and other small items.
Note: Many restaurants have additional equipment such as beer boxes, spaghetti magic machine, etc.
PLACES WHERE WORK IS PERFORMED: This work is performed on the employer's premises.
Location of premises may vary throughout the employer's Company.
This job description was developed by observing the work in process and from information provided by the management of Daland Corporation.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Helper Manufacturing to join our Fabrication team in Algona and Auburn, Washington.
Join our innovative manufacturing team as a Helper, where your contributions will play a vital role in the production process. In this dynamic position, you will utilize a variety of hand and power tools to perform essential tasks such as sorting, cleaning, and preparing parts for assembly and finishing. Your attention to detail will ensure that identification markings are accurately applied, while your organizational skills will help maintain a clean and efficient workspace. You will collaborate closely with skilled employees, assisting in mechanical and paint duties, and ensuring safety protocols are followed in high-stakes environments. Your ability to operate specialized equipment, such as the video jet marking machine and anodizing processes, will be crucial in supporting our production goals. If you are passionate about contributing to a team that values quality and precision in manufacturing, we invite you to be a part of our mission to deliver excellence.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Perform various duties using hand or power tools, including staking, filing, trimming, sawing, buffing, drilling, sanding, and filling to facilitate assigned tasks.
Sort, count, wrap, unwrap, and clean parts, tools, assemblies, or equipment as required.
Maintain cleanliness and organization of work areas by sweeping, cleaning, and picking up materials and parts.
Move, pack, and unpack boxes, materials, parts, tools, and equipment, ensuring proper handling and storage.
Apply identification numbers or letters (part marks) to parts, materials, or assemblies using various marking methods (e.g., steel, rubber, electro-etch).
Rack and unrack tubes and materials, applying dust caps and seals, and verifying configuration discrepancies against samples.
Assist higher classification employees with mechanical and paint duties, including filling pots, moving lifts, and setting up/removing painting equipment.
Maintain surveillance in paint and assembly areas, ensuring safety procedures are followed and assisting incapacitated employees as needed.
Perform masking processes, including applying masking tape and protective materials to parts in preparation for painting or plating operations.
Finish contoured and flat surfaces to required specifications using abrasive materials prior to and after painting, including hand touch-ups.
Clean and service paint spray application equipment, including tanks, brushes, and hoses, after use.
Review Work Orders (WOs) and drawings to determine work requirements and obtain necessary tools and specifications using online computing equipment.
Operate and maintain the video jet marking machine, ensuring proper fluid levels and cleanliness of heads.
Assist in the anodizing process by loading and unloading detail parts on/off the load bar and performing low-pressure tests on tubing.
Count, load, and protective wrap finished production parts for shipment to the next operation, and log completed jobs into the Decac MRM system.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications:
1+ years of experience using basic math (e.g. addition, subtraction, multiplication and division)
1+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design)
Must be able to lift, push and pull up to 35 pounds frequently within an 8-hour shift
Must have basic computer experience and competency skills
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This role is primarily second shift; however, there may be additional shift requirements to support program objectives.
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $21.32/hour, with potential to earn up to $48.70/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar. 25, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airlines is excited to offer opportunities for a Numerical Control Tape Laminator Operator to join our Fabrication team in Everett, Washington.
Join our innovative team as a Numerical Control Tape Laminator Operator, where you will independently operate and adjust advanced tape laminator machines, ensuring precise setups and adherence to established shop practices. Your attention to detail will guide you as you prepare materials, verify specifications, and utilize precision measuring instruments to achieve optimal results. You will play a key role in monitoring machine operations, troubleshooting any issues, and performing quality checks to ensure that every part meets stringent standards. Your commitment to safety and proper handling of hazardous materials will contribute to a secure and efficient work environment. If you are passionate about precision manufacturing and thrive in a fast-paced setting, we invite you to be a part of our mission to deliver exceptional aerospace solutions.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Independently operate and adjust numerically controlled Tape Laminator machines according to established shop practices and procedures.
Prepare for job setup by reviewing production orders, work orders (W/O), and setup documents, ensuring access to blueprints and drawings.
Verify that the correct materials and tools are issued and free from visible defects before starting work.
Identify the type of machine setup needed based on drawings and work orders, including flat tape laminating machines and automated fiber placement machines.
Check machine setups and parts completed by previous operators to ensure safe working conditions and job progress.
Prepare machines by obtaining materials from storage and performing necessary processes before operation, such as rolling tackifier and laying fiberglass.
Use precision measuring instruments, such as dial indicators, to align and level the layup table as required.
Retrieve and download CNC programs to the machine controller from the mainframe server.
Set machine coordinates and adjust offsets, tool heights, and laser settings using the controller keyboard or pendant.
Run the machine to lay graphite plies, copper ampe plies, and perform hand trimming and rework as necessary.
Monitor machine operations for unusual vibrations or sounds, checking gauges and displays for warnings.
Move finished parts and tools using appropriate material handling equipment as required.
Handle and dispose of hazardous materials in accordance with safety regulations and using personal protective equipment.
Perform quality checks after each operation to ensure parts meet specifications and are free from defects.
Maintain personal and tool certifications, consulting with team leaders and supervisors on process or job-related issues as needed.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications:
1+ Years of experience using precision measuring tools.
1+ Years of experience with multi-axis Numerical Control (NC) machines.
1+ Years of experience obtaining and using information from drawings, documents, machine control data, to set up parts or material on pallets for machining operations.
1+ Years of experience working with blueprints, specifications, assembly drawings and standard operating procedures.
Able to stand and walk throughout work shift (6+ hours) as well as carry and lift up to 25 pounds.
Preferred Qualifications:
1+ Years of experience operating 3, 4, or 5 axis NC/CNC machine tools.
Experience working with and around hazardous materials (while using the proper protective equipment).
Conflict of Interest:
Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for a variety of shifts.
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar. 22, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Salary Range:$20.00 To $44.00 Hourly
We’re growing!
Apply now and be part of our world-renowned, award-winning team!
Precinmac is a leading supplier of mission-critical, precision machined components used in the aerospace and defense, semiconductor, and automation equipment sectors. We specialize in manufacturing uniquely designed high tolerance precision machined components and assemblies, with a focus on continuous improvement, on-time delivery, and the highest possible quality and consistency. We are looking for a skilled CNC Machinist who has a drive for excellence and precision and experience with 4 axis horizontal mill experience and/or lathe/mill turn experience.
Multiple Shifts Available with differentials of 10%, 20% and 30%!
Responsibilities and Duties
- Produce quality parts on CNC machines such as, but not limited to, Lathes, Mill Turn, 3 Axis Milling, 4 Axis Milling, 5 Axis Milling
- Load parts, prove tapes, operate controls, set offsets, perform edits, deburr and inspect
- Study and interpret drawings, manuals, and specifications; determine dimensions and tolerances, perform sequence of operations and setup measurements
- Interpret inspection data and make adjustments
- Measure and mark dimensions and reference points for subsequent machining
- Detect equipment malfunctions or out of tolerance machining and adjust machine, controls, or control media as required to ensure quality of production.
- Communicate with supervisor, engineers, maintenance, quality and other shop personnel for assignments and to resolve machining or quality issues
- Keep equipment and work area clean and orderly; perform preventative maintenance on equipment
- Adhere and comply with state and federal law, the Company AS9100 quality program and procedures, Company policies and safety and environmental regulations
- May perform other duties as assigned
Qualifications and Skills
- High School Diploma or GED. Technical/Vocational training desired.
- 2 year degree in Precision Machining, OR minimum of 2 years operating CNC machines such as lathes, milling, and mill turn machines within a controlled Mil-Aerospace or medical parts machining environment
- Experience machining medium to high complexity work
- Knowledge of programming language
- Proficient knowledge and application of precision measuring instruments and the application of such instruments. Instruments should include but not limited to calipers, ID and OD micrometers, depth gages, indicators, and CMM experience
- Knowledge of reading drawings and specifications with an understanding of geometric tolerance and dimensions
- Knowledge of tool holders, cutting tools, boring bars, fixtures, inserts and other accessories used on various machines
- Must be able to follow written and oral instructions
- Must be able to communicate in English (both oral and written) as it relates to the job
- Must be adaptable to a changing work environment
- Must possess math skills to include but not limited to adding, subtracting, multiplication, division, geometry and algebra for the purpose of calculating material fabrication.
- Willing to run multiple machines independently or in a team environment.
BENEFITS
- Medical, Dental and Vision Insurance with minimal cost to employee
- 401k plan with an employer match; 100% vested upon hire
- Short Term Disability, Long Term Disability, and Life Insurance at no cost to employee
- PTO levels to reward your years of experience, plus 10 Paid Holidays
- Tuition Assistance
- ... and more!
For information on Precinmac, including more information on employee benefits and our company culture, visit our website at are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment in compliance with all federal and state regulations. Precinmac provides affirmative action in employment for qualified individuals with a disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
The primary focus of this position will be to support the Engineering Department in the production and maintenance of equipment, tools and fixtures designed for production processes across various manufacturing departments. Under minimal supervision, set up and operate manual and programmable machines normally found in a manufacturing environment. Interprets engineering drawings, prints, sketches and verbal instruction. Is capable of machining various different materials and delivers parts to established specifications.
Essential Job Description:
- Sets up and runs Manual Lathes
- Sets up and runs Milling Machines (Bridgeport or other)
- Sets up and runs surface grinder
- Reads and interprets blueprints
- Properly use all types of micrometers, calipers, and other measuring instruments to measure/verify depth, blade, ID, OD, etc.
- Recognizes, deploys, and properly uses inserts and tooling.
- Performs daily and regular cleaning and light maintenance tasks on machines.
- Has a passion for suggesting improvements, working with people to enhance productivity across manufacturing departments as a direct result of work they do
- Utilizes and abides all safety procedures.
- Complies with all quality policies, specifications, regulations, and instructions.
- Shares knowledge and mentor's junior and other co-workers
- Must comply with ITAR employment
Skills and Abilities:
- Effective communication and understanding of job instructions both verbally and written.
- Problem solving skills to identify potential issues and fix errors.
- Attention to detail with precision equipment and product.
- Ability to perform basic mathematical computations.
- Milling Machine Experience a must (Bridgeport or other)
- Ability to perform advanced mathematical computations (trigonometry and geometry) is a plus
- Understands and interprets CNC programs when needed is a plus.
- Understands and can perform tool wear offsets is a plus
- Skills to maintain extremely tight tolerances (as low as 0.001\") is a plus
- CNC Experience is a plus
Education and Experience:
- High school diploma or GED required
- English language Skills are a must (Ability to read and speak), bi-lingual is a plus
- 5 years related experience and/or training or equivalent combination of education and experience.
- Experience with small assembly production processes, precision manufacturing is a plus
- Experience as a manufacturing technician performing secondary machining operations is a plus
- Experience setting up and /or running Wire and Ram EDM or working with EDM components is a plus
Physical Requirements:
- Ability to lift 40 pounds with assistance from handling equipment and co-workers.
- Required to stand, walk, and reach with hands and arms.
Benefits:
- Medical
- Dental
- Vision
- Short Term Disability
- Long Term Disability
- PTO
- Paid Holidays
- Paid Sick Days
- 401K / 401K Company Match
- Life Insurance
- Paid Jury Duty
- Employee Referral Program
- Tuition Reimbursement Program based on job.
- Employee Assistance Program
Salary Range:
- $25.00 - $38.00/Hour based on experience. \"$25.00- $38.00/Hour - \"Wage is dependent on skills and experience, possibly above listed for the most qualified and experience candidates\"
EEOC Statement:
MW Industries, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Visit for more information about MW Industries, Inc., and our affiliate companies.
Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
Apply
Description
For over a century, American Packaging Corporation (APC) has been a leading flexible packaging converter for customers throughout North America. We nurture our employees by providing competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs. These are just a few reasons why we were named a "Best of the Best" in the Best Workplaces in the Americas awards for 12 years in a row. APC's longstanding success is fueled from the inside out, and we consistently seek to improve our internal operations to propel that success into the future.
Prepress Operator
SHIFT: 1st/2nd Rotating
SUMMARY: To prepare and stage press or laminator jobs. Prepress personnel are used in any capacity needed to stage items at any machine. They may retrieve and prepare cylinders for press run and after the press run, clean the cylinders and store them. All of these functions must be performed in the safest, most effective and efficient manner while adhering to established SOP's and quality standards.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following:
- Facilitate on the job training and instruction for team members on the correct use of tools and equipment to ensure proper safety and operating procedures are followed.
- Actively participate and embrace in the STOP Safety Program fundamentals and adhere to all safety guidelines and rules to aid APC's efforts to achieve a zero-accident rate.
- Participate as a Subject Matter Expert in developing, understanding, and following Standard Operating Procedures and or training documentation.
- Print and understand each job's Job Jacket, Print Specification, and Manufacturing Specification and take to the press.
- Retrieve daily production schedule that identifies which job will run, quantities, priorities, etc. Interpret and act upon information.
- Detect, report, and resolve all missing or substandard machine parts.
- Use an automated storage system terminal to retrieve and return cylinders and anilox to storage.
- Coordinate with Mounting Dept with respect to the production schedule and the staging of jobs. *Applies to Story City, IA COE
- Assemble and transport print cylinders and aniloxes between printing press and prepress departments.
- Place cylinders on assembly table and install the gears and journals. Install the pans, applicator pipes, end shields, splash guards and cylinders into the carriage units. *Applies to Roto COE.
- Return the units to prepress, remove the parts, clean up the cylinders, and store them back into the storage system after a job has run. *Applies to Roto COE.
- Aid on press set-ups as needed. Assist miscellaneous housekeeping and cleaning responsibilities.
- Operate daily a core cutter to produce accurate size cores for each scheduled print job.
- Complete required reports and paperwork. Use a computer terminal.
- Perform required cleaning tasks - some daily, weekly or monthly requirements.
- Obtain Power Industrial Truck license(s).
- Effectively communicate with coworkers throughout all shifts.
- Attend and participate in all company mandated meetings.
- Business travel may be required.
- Any other duties as assigned.
Requirements
QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); and one to three months related experience and/or training; or equivalent combination of education and experience.
LANGUAGE SKILLS: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.
MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
REASONING ABILITY: Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.
PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear. The employee frequently is required to reach with hands and arm. The employee is occasionally required to walk. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision.
WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts, fumes or airborne particles, and toxic or caustic chemicals. The noise level in the work environment is usually moderate.
American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.
If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:
.
NC Programmer
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
Accountability:
Develop, implement, and troubleshoot CNC program designs. Provide technical expertise in collaboration with functions across the organization to achieve project goals. Work closely with production to solve problems. Use strong analytical design and project management skills along with product expertise to meet customer requirements.
Essential Functions and Duties:
- Prepare computer programs to control CNC machine operations using CAD/CAM terminal (Siemens NX and MasterCam).
- Prepare flow charts, documents and sequence logic and write complete sequence of machine operations necessary to complete cycle.
- Analyze engineering drawings for materials, process fabrication and design elements.
- Specify patterns on programming sheet for way part is to be machined.
- Assure program meets target cycle time and program generates geometry to customer requirements.
- Select appropriate cutting tools, speeds and feeds, tool path application necessary to perform the operation.
- Assist in the concept design of required tools and gages, support changes to existing tools and fixture as improvements are identified.
- Support lean activities both within the Engineering group and across the organization.
Complexity of Tasks:
Requires strong verbal and written communication skills along with advanced interpersonal skills. Strong project management skills are essential. Must be able to collaborate with other departments and functions in achieving project goals. Use available resources to support customer needs and expectations on both a national and international level.
Qualifications:
- Bachelor's Degree in an engineering discipline preferred and/or equivalent experience.
- Ten or more years direct experience in multi-axis programming of Aerospace machining operations and materials.
- Ability to program in appropriate programming language using either a CAD/CAM terminal and/or manually generated.
- 3D modeling sketcher, assemblies, lathe, and drafting capability in Siemens PLM (NX 8.5) or later version
- CAD/CAM software: Siemens NX and MasterCam required
- Full multi-axis (5+) or partial (3+1) and general CNC machining/programming experience with lathes, milling machines, and mill/turns. Grinding experience preferred.
- CG Tech Vericut experience required.
- Capable of debugging programs and working closely with shop floor and inspection personnel.
- Some tool design experience preferred.
- Proper application and knowledge of various cutting tools and holders to efficiently complete program operations.
- Must be a team player and have the ability to work closely in a shop environment.
- Seek ideas for continuous improvement; suggest and encourages innovative ideas to improve current systems and processes.
- Working knowledge of Microsoft office application software to include Word, Excel and PowerPoint required
Position Requirements
Shift
Days
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Manchester
Category
Engineering
Req Number
ENG-25-00019
Position
NC Programmer
Close Date
Post Internal Days
0
Number of Openings
3
Exempt/Non-Exempt
Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
Apply
Description
At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.
LOCATION: DeForest, WI
SHIFT: 3rd
SUMMARY: To prepare and stage press or laminator jobs. Lead shift Prepress personnel on shift tasks and day-to-day operations. Retrieve daily production schedule that identifies which job will run, quantities, priorities, etc. Interpret and act upon information. Lead Prepress personnel are used in any capacity needed to stage items at any machine. They may retrieve and prepare cylinders for press run and after the press run, clean the cylinders and store them. All these functions must be performed in the safest, most effective and efficient manner while adhering to established SOP's and quality standards.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
- Facilitate on the job training and instruction for team members on the correct use of tools and equipment to ensure proper safety and operating procedures are followed.
- Actively participate and embrace in the SPOT Safety Program fundamentals and adhere to all safety guidelines and rules to aid APC's efforts to achieve a zero-accident rate.
- Participate as a Subject Matter Expert in developing, understanding, and following Standard Operating Procedures and or training documentation.
- Print and understand each job's Job Jacket, Print Specification, and Manufacturing Specification and take to the press.
- Retrieve daily production schedule that identifies which job will run, quantities, priorities, etc. Interpret and act upon information.
- Detect, report, and resolve all missing or substandard machine parts.
- Use an automated storage system terminal to retrieve and return cylinders and anilox to storage.
- Assemble and transport print cylinders and aniloxes between printing press and prepress departments.
- Place cylinders on assembly table and install the gears and journals. Install the pans, applicator pipes, end shields, splash guards and cylinders into the carriage units.
- Return the units to prepress, remove the parts, clean up the cylinders, and store them back into the storage system after a job has run.
- Aid on press set-ups as needed. Assist miscellaneous housekeeping and cleaning responsibilities.
- Complete required reports and paperwork. Use a computer terminal.
- Perform required cleaning tasks - some daily, weekly or monthly requirements.
- Obtain Power Industrial Truck license(s).
- Load/unload trucks at shipping dock.
- Complete necessary paperwork needed for to track all cylinder movement.
- Complete PSM training and be able to perform all work in the washroom.
- Effectively communicate with coworkers throughout all shifts.
- Attend and participate in all company mandated meetings.
- Business travel may be required.
- Any other duties as assigned.
Requirements
QUALIFICATION REQUIREMENTS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION and/or EXPERIENCE
Associate/Bachelor's degree (A. A./B.S.) or relevant work history or equivalent from two-year college/four-year college or technical school; with one-year related experience and/or training; or equivalent combination of education and experience.
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the public.
MATHEMATICAL SKILLS
Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee frequently is required to sit and reach with hands and arms. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.
If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:
.
