Assembly Language Programming Jobs Remote Jobs in Usa

• 
  
• Set up and operate machine tools including but not limited to the following:
  
• Milling Machines & Machining Centers (manual and CNC controlled)
  
• Engine & Slant Bed Lathes (manual and CNC controlled)
  
• Surface Grinder
  
• Drill Presses
  
• Tool & Cutter Grinders
  
• Cut-off Saw/ Band Saw/ Abrasive Saw
  
• Use all applicable hand tools including: Micrometers (inside/outside), calipers, height gages, depth gages, etc.
  
• Machine prototype components from 3-D model files supplied from Engineering Design.
  
• Using creativity and self-direction in designing, machining, and testing of prototypes and fixtures when standard methods do not apply.
  
• Machine components or prototypes to supplied Engineering blueprints within specified tolerance requirements.
  
• Provide innovative input, as appropriate, to Engineering staff to help meet overall program goals.
  
• Determine all necessary equipment and operating parameters necessary to achieve completion of assignments including; end mills, inserts, drills, reamers, fixturing, cutting speeds, surface finishes, etc.
  
• Design and construct fixtures for aiding in the machining process as necessary.
  
• Perform bench work with hand tools as necessary.
  
• Perform maintenance on machine tools, equipment, and work area to maintain a proper work environment.
  
• Ability to work from written or verbal instructions.
  
• Participate in the Quality Improvement Program through the use of QWG's, MATS's, CATS, and utilization of QIP problem solving techniques.
  
• Perform Technical Lab functions as necessary (hydro testing, inspection, pattern approvals, etc.).
  
• Specific policies and procedures have been established by the Engineering Department to provide for the security and accessibility of electronic data and confidential information. It is the responsibility of the employee, in the daily course of doing business, to follow said policies as they relate to document management (see EOG-26). The extent to which departmental research and development information is stored electronically has vastly increased, and will continue to do so. The new Federal rules pertaining to electronic discovery stipulate that substantive email communications constituted \"records\" under the Federal Records Act. It is therefore the responsibility of each departmental employee to understand their role in communicating via e-mails and that all e-mails must be written/responded to in a professional manner
  
• Follow ALL safety procedures and guidelines.
  

• 
  
• High school graduate.
  
• Proficient in blueprint reading, assembly drawings, shop math, geometry, and use of precision measuring instruments.
  
• Proficient in bench work including: drilling, tapping, filing, assembly, and inspection of components for form, fit, and function.
  
• Minimum of eight years of machine shop or related experience.
  
• Ability to set up, operate, and maintain all Lab machine tools in a proper and safe operating manner.
  
• The ability to operate or adapt to the use of CNC controlled machine tools including programming, set-up, and proper operating parameters required to safely operate this equipment.
  
• MasterCam experience preferred but not necessary.
  

Description:

The Director of Operations will oversee all production and facility operations at ALIGN Precision Philadelphia, ensuring seamless execution across precision machining, assembly, and cleanroom environments. This role will serve as the operational hub, coordinating with the Director of Planning & Delivery and Director of Quality to deliver on customer commitments while driving efficiency, safety, and culture. Reporting directly to the Site General Manager, the Director of Operations will translate strategic goals into daily execution and long-term capability building.

Essential Duties and Responsibilities:

Production & Facilities

• Provide leadership to a staff of Production Supervisors and CNC Programmers.
• Lead machining, CNC programming, assembly, and cleanroom operations.
• In cooperation with the Director of Maintenance, oversee facilities management, equipment utilization, and preventive maintenance.
• Ensure Safety, Quality, Delivery, and Cost targets are consistently achieved.
• Develop the operations and capital equipment budget.
• Champion 5S workplace organization.

Scheduling & Capacity Planning

• Develop daily plans and execute production schedules against the master schedule.
• Cooperate with Planning and Delivery through the SIOP process providing inputs into capacity planning and modeling, aligning with the supply chain and customer demand.
• Partner with Planning and Delivery to balance inventory strategies with operational readiness.
• Collaborate with Quality and Engineering to embed process controls and ensure compliance.

Continuous Improvement

• Drive Lean, Six Sigma, and Kaizen initiatives across production areas working closely with Engineering.
• Implement systems for performance metrics, accountability, and operational transparency.
• Champion waste reduction, cycle time improvement, and productivity gains.

Culture & Leadership

• Build a culture of engagement, accountability, and innovation.
• Mentor supervisors and team leads, fostering psychological safety and high performance.
• Facilitate employee engagements and cross-functional collaboration to surface systemic themes.

Cross-Functional Alignment

• Act as the connective agent between Planning and Delivery, Quality, Engineering, Program Management and Business Development.
• Support business development by ensuring operational readiness of our expanded cleanroom and CNC automation for new verticals.
• Collaborate with leadership to embed strategic operating systems across the enterprise.

Qualifications:

• Bachelor’s degree in Engineering, Operations Management, or related field.
• 10+ years of leadership experience in precision machining, semi-conductor, aerospace, medical devices, or advanced manufacturing.
• Proven success in production leadership, scheduling, and facilities management.
• Strong background in Lean, Six Sigma, and operational excellence.
• Excellent leadership, communication, and team-building skills.
• Ability to balance strategic vision with hands-on execution.

Other Skills Required:

• Communications - Exhibits good listening and comprehension.

• Business Acumen - Understands business implications of decisions; displays orientation to profitability; demonstrates knowledge of market and competition. Aligns work with strategic goals.

Language Skills:

Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.

Mathematical Skills:

Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

Reasoning Ability:

Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

Computer Skills:

To perform this job successfully, an individual should have an understanding of Microsoft Office Software- especially knowledge of Microsoft Word and Microsoft Excel.

Physical Demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee will be in the office and shop and required to sit, stand and walk.

Work Environment:

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

ADDITIONAL NOTES:

ALIGN Precision is an Equal Opportunity Employee and wholeheartedly supports diversity in the workplace as a basic premise for business success. All employees of ALIGN Precision are employed on an at-will basis.

This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments.

A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbent(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities.

Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities

The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c)

POSITION TITLE: University Police Officer

AGENCY: University of Massachusetts Dartmouth

SALARY: Grade 15

GENERAL STATEMENT OF DUTIES AND RESPONSIBILITIES:
Patrols the buildings and grounds and adjacent areas of a State educational institution and enforces State laws as well as rules and regulations of the institution; performs related work as required. Protects safety and security of the UMD population and property.

SUPERVISION RECEIVED:
Works under the direct supervision of an employee of a higher rank who assigns and reviews work for proper performance and conformance with instructions, rules, and regulations.

DIRECT REPORTING STAFF: None

DETAILED STATEMENT OF DUTIES AND RESPONSIBILITIES:

• 
  
• Patrols the buildings and grounds of the institution at regular intervals and guards against trespass, theft, and damage to property
  
• Maintains order among visitors and students, directs traffic, issues motor vehicle citations, and enforces the parking regulations of the institution
  
• Exercises police powers in the detection and apprehension of law violators, investigates accidents and complaints, and patrols roads of the institution
  
• Serves court summons, testifies in various courts, and gives expert testimony if qualified
  
• Performs police duties at plays, dances, or at other educational institutional functions
  
• Protects other areas of a State educational institution such as dormitories, resident dining areas, etc.
  
• Prepares reports on investigations conducted and noteworthy incidents occurring during tours of duty
  
• Provides First Responder First Aid and Cardiopulmonary Resuscitation when required, and provides for the safe transportation of injured or sick persons to the nearest medical facility
  
• Performs police functions over the National Law Enforcement Telecommunications system computer network
  
• Assist Municipal police, State police and other police agencies as requested
  
• Performs other related work as required
  

QUALIFICATIONS REQUIRED AT HIRE:

• 
  
• Knowledge of the principles and correct usage of the English language including grammar, punctuation, and spelling
  
• Ability to give oral instructions in a precise, understandable manner
  
• Ability to establish and maintain harmonious working relationships with others
  
• Ability to deal tactfully with others
  
• Ability to interact with people who are under physical and/or emotional stress
  
• Ability to communicate effectively in oral expression
  
• Ability to maintain a calm manner in stressful and emergency situations
  
• Ability to make decisions and act quickly in dangerous or emergency situations
  
• Ability to exercise discretion in handling confidential information
  
• Ability to exercise sound judgment
  
• Ability to establish rapport with others
  
• Ability to follow oral and written instructions
  
• Ability to motivate others
  
• Ability to prepare general reports
  
• Ability to maintain accurate records
  
• Ability to use proper grammar, punctuation and spelling
  
• Ability to read, write and comprehend the English language
  
• Ability to work accurately with names, numbers, codes and/or symbols
  
• Ability to explain the provisions of the laws, rules, and regulations governing assigned unit activities
  
• Ability to perform arithmetical computations with speed and accuracy (addition, subtraction, multiplication and division)
  
• Ability to accurately record information provided orally
  
• Ability to gather information through questioning individuals
  
• Ability to conduct interviews
  
• Ability to gather information by examining records and documents
  
• Ability to assemble items of information in accordance with established procedure
  
• Ability to utilize investigative techniques to obtain information
  
• Ability to understand and explain the laws, rules and regulations governing assigned unit activities
  
• Ability to explain the provisions of the laws, rules, regulations, procedures, guidelines, policies and standards governing assigned unit activities
  
• Ability to establish rapport with persons from different ethnic, cultural and/or economic backgrounds
  
• Ability to analyze and determine the applicability of data, to draw conclusions and to make appropriate recommendations
  
• Ability to operate a motor vehicle
  
• Ability to coordinate the efforts of others in accomplishing assigned work objectives
  
• Ability to gather information through observing individuals
  
• Ability to give written instructions in a precise, understandable manner
  
• Ability to lift heavy objects or persons
  
• Ability to adapt to varying work situations
  
• Ability to stand and/or walk for prolonged periods of time
  
• Physical stamina and endurance
  

QUALIFICATIONS ACQUIRED ON JOB:

• 
  
• Knowledge of the types and uses of agency forms
  
• Knowledge of the laws, rules, regulations, policies, procedures, guidelines, specifications and standards governing assigned unit activities
  
• Knowledge of the geographic composition of the assigned work area
  
• Knowledge of the applications of electronic data processing in police work
  
• Knowledge of the types and uses of fire fighting equipment such as hoses, nozzles, etc.
  
• Knowledge of the methods and techniques of fire fighting
  
• Knowledge of the types and causes of fires
  
• Knowledge of the proper telephone procedures for making and receiving agency calls
  
• Knowledge of the types and availability of public and private organizations for providing health care services
  
• Knowledge of the provisions of the state laws governing administrative hearings
  
• Knowledge of the laws, rules, and court decisions governing the presentation and admissibility of evidence
  
• Knowledge of rescue methods used in firefighting
  
• Knowledge of the laws, rules and regulations governing arrest, search and seizure
  
• Skill in operating fingerprint equipment
  
• Skill in using fire fighting apparatus such as extinguishers, etc.
  
• Knowledge of interviewing techniques
  
• Knowledge of investigative techniques
  
• Knowledge of the standard methods for identifying and preserving evidence
  
• Knowledge of the safety practices and procedures followed in the use of firearms
  
• Knowledge of the types and symptoms of mental and/or emotional disorders
  
• Knowledge of the procedures followed in courtroom proceedings
  
• Knowledge of the terminology used in police work
  
• Knowledge of the principles and practices of police administration
  
• Knowledge of the standard methods used in fingerprint classification and identification
  
• Knowledge of the methods of general report writing
  
• Knowledge of the standard police procedures and techniques followed in foot and auto patrols
  
• Knowledge of the techniques used in police surveillance work
  
• Knowledge of the standard police methods used in collecting and preserving evidence
  
• Knowledge of the fundamentals of criminal investigation
  
• Knowledge of the terminology used in law enforcement work
  
• Knowledge of the types and uses of fire protection equipment such as fire alarms and sprinkler systems
  
• Knowledge of the types and application of emergency medical procedures such as cardiopulmonary resuscitation
  
• Knowledge of the terminology, codes and standard abbreviations used in connection with radio communication
  
• Knowledge of the methods and procedures followed in the security of buildings and property
  
• Knowledge of the standards procedures followed in operating fixed radio communications equipment
  
• Knowledge of the methods and techniques of vehicular and pedestrian traffic control
  
• Knowledge of the types and uses of equipment used in vehicular and pedestrian traffic control
  
• Knowledge of the standard methods and techniques of crowd management and riot control
  
• Knowledge of the methods followed in the care and maintenance of firearms
  
• Knowledge of the procedures and techniques used in transportation of prisoners
  
• Knowledge of the types and uses of devices used in restraining prisoners
  
• Knowledge of lifesaving techniques
  
• Knowledge of police inspection techniques
  
• Knowledge of clerical office practices and procedures including office record keeping
  
• Knowledge of the types and availability of public and private organizations for providing medical and legal services
  
• Skill in the use of firearms and other tactical weapons and devices used in police work such as riot batons, handcuffs, etc.
  
• Skill in operating motor vehicles at high speeds
  
• Skill in operating facsimile transmitting equipment
  
• Skill in using emergency medical equipment such as oxygen masks, resuscitators, etc.
  
• Ability to explain the procedures, guidelines, policies and standards governing assigned unit activities
  
• Ability to recognize in others the types and symptoms of mental and/or emotional disorders
  
• Ability to read and interpret legal documents such as court decisions, briefs, court opinions, etc.
  
• Ability to read and interpret such documents as maps, charts, building, plans, etc.
  
• Ability to prepare and use charts, graphs and tables
  

MINIMUM ENTRANCE REQUIREMENTS:

• 
  
• Must have completed a High School diploma or equivalent
  

LICENSE AND/OR CERTIFICATION REQUIREMENTS:

• 
  
• Must complete (and pass) the Univeristy Police entrance exam.
  
• Must be able to successfully complete or have completed a full-time Municipal Police Academy Certification or, be able to obtain a waiver from the Massachusetts Criminal Justice Training Committee before being considered. (Intermittent, Reserve Academy or SSPO do not qualify.)
  
• Must possess a valid driver's license.
  
• Must possess a Class A license to carry a firearm at the time of appointment and throughout employment.
  

ENVIRONMENTAL DEMANDS:
Ability to work at any hour and in all weather conditions or hazardous environments.

MENTAL REQUIREMENTS:
Proficiency in all phases of duties performed. Must demonstrate logical, effective problem-solving ability. Must be able to provide credible testimony in a court of law.

PHYSICAL REQUIREMENTS:

• 
  
• Physical Activity Frequency
  
• Driving Frequent
  
• Walking Frequent
  
• Running Frequent
  
• Standing Frequent
  
• Stooping Occasional
  
• Climbing Occasional
  
• Crouching Occasional
  
• Pushing Occasional
  
• Jumping Over Occasional
  
• Pulling Occasional
  
• Carrying Occasional
  
• Reaching above head Occasional
  
• Lifting/Carrying (100 lbs.) Occasional
  
• Lowering Occasional
  
• Hand-wrist and elbow motion Occasional
  
• Grasping Occasional
  
• Holding Occasional
  
• Near Vision Frequent
  
• Far Vision Frequent
  
• Color Vision Frequent
  
• Peripheral Vison Frequent
  
• Depth Perception Frequent
  
• Adjust focus Frequent
  
• Talking Frequent
  
• Hearing Frequent
  
• Smell Occasional
  

Frequency Key (hours per day): Never = 0 hours; Rare = up to 1 hour; Occasional = 1 to 3 hours; Frequent = 3 to 6 hours; Constant = 6 to 7 hours.

Good physical condition and vision, ability to hear and speak. The employee may occasionally be required to physically subdue combative subjects and must maintain a level of physical ability accordingly. Must be able to demonstrate fitness for duty as determined by physiological tests. Successfully complete an in-house 6-week field training program.

TOOLS AND EQUIPMENT USED:
Must be proficient in the operation and safety procedures of all equipment utilized by the University Police Department necessary to perform assigned tasks. Requires sufficient hand, eye, arm coordination and strength to physically restrain an adult and to operate a firearm.

REMARKS - Incumbent must satisfy all statutory requirements including but not limited to passing a physical fitness test, drug test, medical examination including a psychological component; background screening and must not have been convicted of a felony.

DEPARTMENT: University Police Department

NO. OF POSITIONS: 3

INTERNAL/EXTERNAL POSTING: Yes

STATE FUNDED: No

SALARY: $56,663.10 - $76,693.76

HOURS: M-F variable shifts

GRADE: 15

UNION: IBPO

UMass Dartmouth offers exciting benefits such as:

• 
  
• 75% Employer-Paid Health Insurance
  
• Flexible Spending Accounts
  
• Life Insurance
  
• Long Term Disability
  
• State Pension Retirement Plan
  
• Optional Retirement Savings Plans
  
• Tuition Credit (Employee, Spouse, & Dependents)
  
• Twelve (12) paid holidays
  
• Paid personal, vacation, and sick time
  
• And More!
  

Benefits for IBPO Union- IBPO

Applicants must be authorized for employment in the U.S. on a full-time basis. Employment-based visa sponsorship is not available.

To apply please submit a letter of interest, a current resume and the contact information for three professional references.

All applicants must take and pass the University Police Exam. For more information regarding the exam and University benefits, etc. please navigate to the Human Resources website at Human Resources.

The deadline for internal applicants is October 6, 2025.

The review of internal and external applications will be ongoing until the position is filled.

If you require ADA Accommodations for this exam, you may complete the request form at Accomodation Request Form immediately after applying for the position. If you have any further questions regarding Accommodation Requests, you may submit an inquiry at Submit an Inquiry. We are happy to help, however, please be aware that we need enough time verify medical necessity.

The projected start dates for these positions are after November, 2025 and after January 1, 2026.

Parts Development – Powertrain Assistant Manager

WHAT YOU WILL DO

• Understand program sourcing requirements and key milestones in support of product launch.
• Identify potential suppliers, analyze capabilities, determine pricing, and select suppliers in collaboration with Engineering and cross-functional teams.
• Select, develop, and manage the supply base for assigned commodities by:
• Preparing and owning RFIs, RFPs, and RFQs for multi-year full production volume
• Preparing bid packages, conducting bidder conferences, analyzing and evaluating proposals
• Negotiating with and recommending suppliers
• Administering resulting contracts
• Negotiating long-term agreements and maintaining best-in-class pricing
• Leading cost reduction initiatives
• Develop assigned commodities with sourced suppliers to meet all specifications and timing requirements.
• Evaluate and guide final supplier selection. Assess supplier core competencies and cost competitiveness using company and industry "should-cost" models.
• Direct and manage suppliers through the established Parts Development process from concept through mass production.
• Develop and achieve target quality levels at each milestone, establishing improvement plans and countermeasures for parts or suppliers impacting Quality, Cost, or Delivery.
• Drive flawless launches at assigned supplier sites, collaborating with cross-functional teams and ensuring adherence to ISIR (PPAP) requirements.
• Proactively identify and resolve issues related to Quality, Cost, and Delivery.
• Lead effective working-level meetings with suppliers for fast issue resolution and relationship development.
• Continuously negotiate piece price and tooling costs to achieve target vehicle cost objectives.
• Develop purchasing strategies in collaboration with Engineering, Quality, Production, and related teams.

Other Responsibilities

• Monitor and support supply chain continuity to prevent production disruptions.
• Collaborate with Engineering (R&D), Quality, and Production Planning teams.
• Plan, organize, and disseminate information related to production and potential suppliers.
• Maintain an up-to-date supply base information database.
• Hire, develop, train, and manage Buyers (Specialists).
• Perform other duties as assigned.

WHAT YOU WILL BRING TO THE ROLE

Required:

• Bachelor's degree in Engineering, Business Management, Supply Chain, Finance, Accounting, or related field from an accredited university
• High proficiency in Microsoft Office Suite, especially Excel and PowerPoint

Preferred:

• Minimum 5+ years of related experience
• Automotive industry experience in Purchasing, APQP, PPAP, Supplier Development/Engineering, Launch, Program Management, or related areas
• Experience with manufacturing processes including injection molding, press, stamping, die casting, welding, assembly, paint, chroming and surface treatments, foaming, cut & sew, SMC, extrusion, SMT, various raw materials, etc.
• Experience with Engines and Transmissions strongly preferred
• Experience working for an OEM or major commodity supplier
• Strong ability to analyze and break down piece pricing
• Bilingual (English/Korean/Spanish combinations preferred)
• Multicultural mindset and ability to work across diverse teams
• Willingness to learn and adapt
• Flexibility to work weekends, holidays, and off shifts as needed

Travel Requirement:

• Domestic and international travel required

WHAT THE COMPANY OFFERS

• Opportunities for growth and career advancement
• Work flexibility
• Competitive compensation and benefits
• Comprehensive Medical, Vision, and Dental insurance
• Paid holidays and paid time off
• Competitive 401(k) plan

Additional Details

• FLSA Classification: Exempt / Salary

Attendance

Regular and consistent attendance is an essential function of this role.

Language Proficiency

Strong command of the English language (written and spoken) is essential for safety, communication, documentation, and collaboration.

Physical Demands

Office Environment

• Primarily sedentary work at a desk/computer for extended periods
• Occasional lifting up to 15 pounds
• Frequent typing and document handling
• Ability to sit, stand, and walk as needed

Production Environment (if applicable)

• Standing, walking, bending, and reaching for extended periods
• Lifting, carrying, pushing, or pulling materials up to 25–30 pounds
• Manual dexterity for tools or equipment
• Work in potentially noisy or hot environments with required PPE
• Ability to climb ladders or stairs and operate equipment safely
• Visual and auditory capability to identify hazards and communicate effectively
• Ability to work in a team-oriented environment

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Crane Maintenance Mechanic, to join our team in Seattle, SeaTac, Renton, Tukwila, Kent, Auburn and Puyallup, Washington.

As a crane maintenance mechanic, you will ensure the safety and efficient operation of our cranes, essential equipment for our manufacturing processes.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities

• Inspect, maintain, repair, rebuild, retrofit, modify, assemble, disassemble, troubleshoot, analyze, diagnose, calibrate, adjust, and test mechanical systems and or subsystems of all types of cranes such as, but not limited to cab operated, radio controlled, jib type, pendant operated, etc. Know, understand, and work in compliance with SHEA and other applicable codes and regulations for overhead cranes

• Coordinate and work with management, engineering, equipment vendors, and other organizations to analyze equipment design requirements and capabilities.
• Use schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances.

• Determine and/or develop methods where procedures may not be available.
• Devise and make shop aids to facilitate work. Operate and utilize mechanical, test equipment and test systems, precision devices in failure analysis, all forms of predictive/preventative technologies, as required on cranes.
• Operate, use and maintain overhead maintenance work platforms
• Maintain, adjust, install and repair, hydraulic, pneumatic and electric brake system components on cranes and bridges as requires.
• Inspect and maintain building runway rails and expansion joints.
• Maintain mechanical crane and hoist systems including cables, chain, sheaves and hooks.
• Perform the operational tests and load tests of cranes and bridges as required by Engineering, SHEA and other applicable codes and regulations.
• Maintain logs, charts, and perform written and verbal tie-in records.
• Prepare reports and schedules as required.
• Work with and assist employees of other classifications as required.
• Perform work in other classifications when incidental but necessary to the accomplishment of the assignment.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. § 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via "Find Jobs" in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• 2+ Years experience using schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances

• 2+Years experience maintaining mechanical cranes and hoists systems including cables, chain sheaves and hooks.

• This position requires an individual when working at heights to utilize fall protection equipment that has weight limitations.
• Able to lift up to 35 pounds.

Preferred Qualifications:

• Experience inspecting and maintaining building runway rails and expansion joints.
• Preference given to those with 2 years overhead crane experience.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for all shifts

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: 33.32 – 61.01

Applications for this position will be accepted until May. 29, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Tank Sealer to join our Joint and Installation team in Everett and Renton, Washington.

As an Integral Fuel Tank Sealer, you will be essential in maintaining the highest standards of quality and safety during the sealing and assembly processes. Utilizing detailed installation plans and specifications, you will prepare tank surfaces, load sealing equipment, and apply sealants and topcoats according to established guidelines. Conducting thorough inspections and shakedowns of work areas prior to tank closure will ensure that any damaged seals or components are repaired and that all systems are functioning correctly. You will also assist with pressure testing operations and perform functional tests on fuel vent systems to identify and address any leaks. Your attention to detail will be critical in determining the appropriate sealing compounds and methods for each task, ensuring compliance. Please note that this role involves working in tight spaces, including entering the wing through a 9.5”X17.7" opening; therefore, comfort with confined spaces is essential for success in this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Obtain daily work assignments from the lead or supervisor and review relevant Installation Plans (IP) and Shop Order Instants (SOI) to determine the work area.

• Gather necessary sealants, solvents, cleaners, and wipers from the designated storage area.

• Install ventilation equipment as required to ensure proper airflow in the work cavity.

• Clean tank surfaces using appropriate solvents or detergents, ensuring they are wiped dry.

• Clean and adjust sealing equipment to ensure proper functionality.

• Load sealing guns and apply sealant and/or topcoat per BAC specifications, including fillet seals to system components and sealing heads and collars of fasteners.

• Perform a shake-down of work areas prior to tank closure to repair any damaged seals or components and prepare for inspection.

• Apply wing station identification numbers on tank doors using stencils and spray paint as required.

• Install fuel tank closure panels or access doors after all necessary steps are complete and accepted by quality assurance.

• Assist with pressure testing operations and perform functional tests on fuel vent systems and tank cavities to determine if leaks exist.

• Submit completed jobs or in-process checks to inspectors for acceptance or rejection.

• Determine proper sealing compounds, sequence of work, and method of application to accomplish assignments.

• Apply aerodynamic seals to skin gaps on leading and trailing edge panels as required.

• Position tools for locating vortex generators and apply faying surface seals as needed.

• Maintain personal and tool certifications, ensuring compliance with operational standards, and contact supervisors for assistance when needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ years of experience with paints, coatings, finishes, and/or sealants.

• Experience in handling chemicals and/or hazardous materials.

• Experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.

• Experience working from heights & using fall protection equipment with weight limitations.  

• Experience with safety process and/or procedures in a manufacturing or operations environment.

• Experience working with tools and following work instructions.

• Ability to access/enter a wing fuel tank opening (approximately 9.5 inch x 17.7 inch)

Preferred Qualifications:

• 1+ year of experience performing aerospace sealing.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

• Respirator trained

• Completed 1+ year of aerospace training in high school or community and technology college

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• This position offers relocation based on candidate eligibility. 

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement

Applications for this position will be accepted until Aug. 28, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airlines is excited to offer opportunities for a Numerical Control Tape Laminator Operator to join our Fabrication team in Everett, Washington.

Join our innovative team as a Numerical Control Tape Laminator Operator, where you will independently operate and adjust advanced tape laminator machines, ensuring precise setups and adherence to established shop practices. Your attention to detail will guide you as you prepare materials, verify specifications, and utilize precision measuring instruments to achieve optimal results. You will play a key role in monitoring machine operations, troubleshooting any issues, and performing quality checks to ensure that every part meets stringent standards. Your commitment to safety and proper handling of hazardous materials will contribute to a secure and efficient work environment. If you are passionate about precision manufacturing and thrive in a fast-paced setting, we invite you to be a part of our mission to deliver exceptional aerospace solutions.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Independently operate and adjust numerically controlled Tape Laminator machines according to established shop practices and procedures.

• Prepare for job setup by reviewing production orders, work orders (W/O), and setup documents, ensuring access to blueprints and drawings.

• Verify that the correct materials and tools are issued and free from visible defects before starting work.

• Identify the type of machine setup needed based on drawings and work orders, including flat tape laminating machines and automated fiber placement machines.

• Check machine setups and parts completed by previous operators to ensure safe working conditions and job progress.

• Prepare machines by obtaining materials from storage and performing necessary processes before operation, such as rolling tackifier and laying fiberglass.

• Use precision measuring instruments, such as dial indicators, to align and level the layup table as required.

• Retrieve and download CNC programs to the machine controller from the mainframe server.

• Set machine coordinates and adjust offsets, tool heights, and laser settings using the controller keyboard or pendant.

• Run the machine to lay graphite plies, copper ampe plies, and perform hand trimming and rework as necessary.

• Monitor machine operations for unusual vibrations or sounds, checking gauges and displays for warnings.

• Move finished parts and tools using appropriate material handling equipment as required.

• Handle and dispose of hazardous materials in accordance with safety regulations and using personal protective equipment.

• Perform quality checks after each operation to ensure parts meet specifications and are free from defects.

• Maintain personal and tool certifications, consulting with team leaders and supervisors on process or job-related issues as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ Years of experience using precision measuring tools.

• 1+ Years of experience with multi-axis Numerical Control (NC) machines.

• 1+ Years of experience obtaining and using information from drawings, documents, machine control data, to set up parts or material on pallets for machining operations.

• 1+ Years of experience working with blueprints, specifications, assembly drawings and standard operating procedures.

• Able to stand and walk throughout work shift (6+ hours) as well as carry and lift up to 25 pounds.

Preferred Qualifications:

• 1+ Years of experience operating 3, 4, or 5 axis NC/CNC machine tools.

• Experience working with and around hazardous materials (while using the proper protective equipment).

Conflict of Interest:

Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 22, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Decorative Interior Repairperson to join our Joint and Installation team in Renton or Everett, Washington. 

As a Decorative Interior Repairperson, you will be essential in ensuring that our aircraft interiors meet the highest standards of quality and safety. Your expertise will be vital in identifying and documenting any visible defects during thorough inspections, allowing you to execute precise repairs on interior trim and furnishings. By utilizing detailed specifications and prints, you will ensure that all materials used are appropriate and effective for the aircraft. Additionally, you will be required to pass an eye examination for color perception to ensure optimal performance in your role. Your meticulous approach will involve disassembling components, cleaning surfaces, and applying various finishes to achieve a flawless appearance. Collaboration with engineering and planning teams will be key as you address any challenges that arise, ensuring that all repairs conform to established procedures and specifications. 

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities:  

• Obtain work assignments from the team leader or review relevant paperwork to determine tasks. 

• Perform walk-through inspections of aircraft interiors to identify and document visible defects for repair. 

• Make repairs to interior trim and furnishings using materials such as plastics, vinyl, and metal, and remove stains or scratches. 

• Use prints, specifications, and documents necessary to accomplish work effectively. 

• Obtain and verify kitted repair supplies, ensuring color combinations are suitable for the aircraft.

• If supplies are not pre-picked, gather specified materials from storage areas as outlined in installation plans or non-conformance records. Disassemble defective interior trim parts using hand tools and clean surfaces prior to applying new materials. 

• Apply potting compounds, primers, adhesives, and special finishes as required by specifications and work orders. 

• Fit and assemble detail components to repaired parts according to specifications and drawings. 

• Paint or touch up repair areas using appropriate tools to achieve the desired finish, including mixing and matching paint as needed.

• Rework materials per engineering specifications and incorporate changes as needed, including leather repairs and touch-ups. 

• Remove marks and scratches from metal surfaces using appropriate tools and techniques. 

• Seal edges of repair areas with color-matched sealant as required.

• Consult with engineering, planning, and inspection on job-related issues and contact team leaders or supervisors when assistance is needed. 

• Document repairs identified by other mechanics and maintain personal certifications as required. 

Physical Demands and Potential Hazards: 

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.  

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. 

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee 

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. 

Basic Qualifications:  

• 1+ years of experience working with vinyl wallpaper, composites/non-metallic materials.

• Experience applying and evaluating decorative paint/ink for color match.

• Ability to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all time.

Preferred Qualifications: 

• 1+ years of experience with aerospace or automotive spray painting.

• Experience working with detailed work instructions or reading and interpreting blueprints and drawings.

• Experience with touch-up painting.

• Enrollment in a Boeing partnered manufacturing related high school, community and technical college academic program.

Typical Education & Experience:  

High school graduate or GED preferred. 

Relocation: 

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. 

Drug Free Workplace: 

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. 

Union Representation Statement:  

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. 

Shift Work Statement:  

• This position is for a variety of shifts  

Total Rewards & Pay Transparency: 

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.    

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.    

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay is based upon candidate experience and qualifications, as well as market and business considerations.    

Pay: $24.32 per hour with potential to earn up to $48.58 per hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 21, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.