Assembly Language Example Jobs in Usa

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. 

As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.  

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities: 

• Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. 

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. 

• Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. 

• Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. 

• Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. 

• Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. 

• Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. 

• Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. 

• Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. 

• Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.

• Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. 

• Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. 

• Use precision measuring instruments to verify that quality standards are achieved. 

• Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. 

• Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. 

Physical Demands and Potential Hazards: 

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. 

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee 

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. 

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process.  Failure to complete the assessment will remove you from consideration. 

Basic Qualifications (Required Skills/Experience):  

• 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.

• 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting. 

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.

• Ability to lift up to 35lbs.

• Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications:  

• 1+ years of experience performing aircraft structural work or equivalate.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:  

High school graduate or GED preferred. 

Relocation: 

This position offers relocation based on candidate eligibility. 

Drug Free Workplace: 

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. 

Union Representation Statement:  

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. 

Shift:  

This position is for a variety of shifts.  

Total Rewards & Pay Transparency: 

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.    

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.    

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay is based upon candidate experience and qualifications, as well as market and business considerations.    

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 10, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. 

As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities : 

• Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. 

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. 

• Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. 

• Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. 

• Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. 

• Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. 

• Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. 

• Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. 

• Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. 

• Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.

• Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. 

• Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. 

• Use precision measuring instruments to verify that quality standards are achieved. 

• Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. 

• Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. 

Physical Demands and Potential Hazards:  

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.  

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required . “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee  

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.  

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. 

Basic Qualifications (Required Skills/Experience):  

• 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.

• 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting. 

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.

• Ability to lift up to 35lbs.

• Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications :   

• 1+ years of experience performing aircraft structural work or equivalate.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:   

High school graduate or GED preferred.  

Relocation:  

This position offers relocation based on candidate eligibility.  

Drug Free Workplace :  

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.  

Union Representation Statement:   

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.  

Shift :  

This position is for a variety of shifts.  

Total Rewards & Pay Transparency:  

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent . Elements of the Total Rewards package include competitive base pay and variable compensation opportunities .   

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work .   

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay is based upon candidate experience and qualifications, as well as market and business considerations .   

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 10, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. 

As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities : 

• Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. 

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. 

• Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. 

• Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. 

• Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. 

• Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. 

• Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. 

• Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. 

• Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. 

• Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.

• Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. 

• Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. 

• Use precision measuring instruments to verify that quality standards are achieved. 

• Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. 

• Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. 

Physical Demands and Potential Hazards:  

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.  

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required . “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee  

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.  

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. 

Basic Qualifications (Required Skills/Experience):  

• 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.

• 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting. 

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.

• Ability to lift up to 35lbs.

• Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications :   

• 1+ years of experience performing aircraft structural work or equivalate.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:   

High school graduate or GED preferred.  

Relocation:  

This position offers relocation based on candidate eligibility.  

Drug Free Workplace :  

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.  

Union Representation Statement:   

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.  

Shift :  

This position is for a variety of shifts.  

Total Rewards & Pay Transparency:  

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent . Elements of the Total Rewards package include competitive base pay and variable compensation opportunities .   

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work .   

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay is based upon candidate experience and qualifications, as well as market and business considerations .   

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 10, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airlines is excited to offer opportunities for an Inspector Electrical & Electronic Sub Assembly to join our Quality team in Everett and Renton, Washington.

As an Inspector for Electrical & Electronic Sub Assembly, you will be an integral part of our commitment to delivering top-notch quality in aerospace manufacturing. This exciting role places you at the intersection of technology and precision, where your keen eye for detail will ensure that every component meets the highest standards of safety and performance. You will engage with advanced inspection techniques and collaborate with a talented team to identify and resolve potential issues before they impact production. Please note that certification for visual acuity and color perception may be required for this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Communicate with shop personnel or check the Call Sheet for the next job or in-process inspection, obtaining applicable drawings and specifications.

• Ensure that the correct revisions of drawings and documents are being used, verifying that all paperwork and online systems are complete and accurate.

• Perform inspections and in-process inspections as required, including crimping, splicing, torque, bond, and ground checks.

• Conduct various tests and measurements, such as resistance tests, to ensure that wires meet specification requirements.

• Monitor manufacturing processes and document findings as required to ensure compliance with quality standards.

• Inspect electrical wire bundles and assemblies, ensuring all parts have been assembled according to drawings and specifications.

• Screen paperwork for options, substitutions, and effectiveness of parts and materials.

• Identify, investigate, and document discrepancies, reporting them to the shop as necessary.

• Reject wire bundles, assemblies, or installations as required, documenting discrepancies and processing Quality Assurance records.

• Indicate Quality Assurance acceptance on appropriate paperwork and online systems, processing documentation as required.

• Coordinate and complete travelers, investigating and clearing check orders as necessary.

• Initiate Inspection Record Change Requests (IRCR) and/or Shipside Action Trackers (SAT) as needed.

• Ensure that certifications for tools, test equipment, and personnel are current and compliant.

• Assist other employees by providing information and answering questions regarding functions, methods, and procedures.

• Perform first article inspections and FAA conformities, coordinating results as required.

• Enter data into various computing software systems, such as Common Manufacturing Execution System (CMES) and Enterprise Process Evaluation Systems (EPES).

• Collaborate with Engineering, Quality, and Manufacturing to evaluate and improve build processes and defect reduction initiatives.

• Initiate and document any nonconforming materials or assemblies according to specifications and procedures.

• Perform audits and surveillance of manufacturing and quality assurance processes to ensure compliance with standards.

• Witness or perform electrical continuity, voltage, resistance, capacitance, and bond or ground testing as required.

• Calibrate and certify electrical process tools, such as loggers, strippers, and crimpers.

• Refer to rejection tags and trouble reports to identify problems and initiate corrective actions.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 2+ years of experience as a Quality Inspector

• 1+ years of experience using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators

• 1+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design)

• Experience working with Microsoft Office (Excel, Word, PowerPoint)

• Proficiency in reading, writing, and speaking English

Preferred Qualifications:

• Electrical experience

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement

Applications for this position will be accepted until Apr. 24, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

About the Company:

At Lincoln Electric Products Co. Inc., We Specialize In The Design, Manufacture, And Distribution Of Custom Equipment Tailored To Meet The Specific Applications And Requirements Of Our Customers. Our Product Range Includes:

• Panelboards: Up to 2000A
• Service and Distribution Switchboards: Up to 8000A
• Generator Connection Boxes
• Generator Output Switchboards
• Single and Double-Ended Substations
• We pride ourselves on delivering high-quality, custom-designed solutions that address the unique needs of our clients across various industries.

Position Summary

Lincoln Electric Products Co. Inc. is seeking a highly motivated and experienced Assembly Manager to join our team in Union, NJ. This individual will play a critical role in overseeing the daily operations of the assembly department, driving efficiency, and ensuring the seamless execution of organizational goals. The Assembly Manager will work collaboratively across departments to enhance productivity, implement process improvements, and contribute to the overall success of the business.

While this role primarily operates Monday through Friday, occasional Saturday work may be required based on business demands. This full-time, exempt position reports directly to the Director of Operations and involves a hands-on approach.

Working Conditions: Office/Shop Environment

Primary Job Function:

• The Low-Voltage Switchboard Assembly Manager oversees the factory's production (including EV) and assembly of low-voltage switchgear systems.
• This includes managing operations and personnel involved in the assembly process to ensure efficient production, high-quality output, and timely delivery.
• The role demands strong leadership, operational expertise, and a focus on continuous improvement in a unionized manufacturing environment.

Key Job Responsibilities:

• Production Planning: The Assembly Manager is responsible for developing production plans, scheduling work activities, and ensuring the availability of necessary resources, such as materials, tools, and equipment, to meet production targets.
• Quality Control: They are responsible for implementing quality control measures and ensuring that all assembled switchgear systems meet the required standards and specifications. This includes conducting regular inspections, tests, and audits to identify and address any quality issues.
• Process Improvement: The Assembly Manager continually looks for opportunities to improve the assembly process, optimize workflow, and enhance productivity. They may collaborate with engineering teams to implement process enhancements, introduce automation, or streamline operations.
• Team Management: This role involves leading and supervising a team of assembly technicians and operators. The Assembly Manager provides guidance, training, and support to ensure that employees perform their tasks effectively and efficiently.
• Safety and Compliance: They are responsible for enforcing safety protocols and ensuring compliance with relevant industry regulations and standards. This includes maintaining a safe work environment, conducting safety training, and addressing any safety concerns or incidents.
• Inventory Management: The Assembly Manager oversees inventory levels, ensures the availability of required components and materials, and helps manage stock control to avoid shortages or excesses.
• Collaboration and Communication: They collaborate with other departments, such as engineering, procurement, and quality assurance, to coordinate activities and address any cross-functional issues. Effective communication with stakeholders, such as customers and suppliers, is also essential.
• Performance Monitoring and Reporting: The Assembly Manager tracks production performance, monitors key performance indicators (KPIs), and prepares regular reports to evaluate productivity, quality, and other relevant metrics. They analyze data and provide recommendations for improvement.
• Experience working in a union shop and familiarity with union labor laws should be preferred.

Job Requirements:

• 3-5+ years of working experience in custom metal fabrication electrical equipment in an industrial setting.
• Ability to read blueprints, bill of material (BOM’s), schematics, diagrams, and technical orders to determine best methods and sequences of product assembly.
• An effective leader who can help level load the factory and can plan a lookout for 3-4 weeks so that the company’s overhead expenses for overtime in the shop stay within budget.
• Should be a Team Player and an Inclusive Leader.
• Knowledge about hand tools and measuring devices.
• Knowledge about EV products.
• Knowledge of Low Voltage or Medium Voltage Switchgear or components.
• Should have a particularly good understanding of Operational Excellence process improvements.
• Ability to work in a loud environment.

Education:

• A bachelor’s degree in engineering.
• Certification in Six Sigma or other process improvement methodologies is preferred.

KIC is looking for a hands-on Production Assembly Technician to join our manufacturing team in Rancho Bernardo. In this role you will build and assemble components such as probes, shields, cable assemblies, and wiring bundles used in electronics manufacturing equipment.

This is an active production role that involves working with wiring, small electrical assemblies, and moving between workstations throughout the day. Candidates who enjoy hands-on manufacturing work and building physical products as part of a team will thrive in this environment.

What You’ll Do

A typical day may include:

• Assembling probes, shields, cable assemblies, and wiring bundles used in KIC products

• Cutting, stripping, routing, and bundling wires for production assemblies

• Following detailed work instructions and production work orders

• Moving between assembly stations to support different stages of the production process

• Performing visual inspections to ensure assemblies meet quality standards

• Occasionally assisting with packaging or preparing finished assemblies

This role focuses primarily on product assembly and manufacturing, not warehouse picking or distribution work.

Work Environment

This is a hands-on manufacturing role that includes:

• Building cable assemblies, probes, and wiring bundles

• Using hand tools such as wire strippers, cutters, and crimpers

• Moving between work areas and being physically active throughout the day

• Repetitive assembly tasks requiring attention to detail

• Occasional lifting of materials up to 40 lbs

Qualifications

• High school diploma or GED preferred

• Experience in manufacturing, electronics assembly, or production environments is a plus

• Ability to work with small hand tools and follow assembly instructions

• Strong attention to detail and consistent quality standards

Compensation & Benefits

Hourly Pay: $18–$20 per hour (DOE) + Profit Share Bonus Program

Benefits include:

• Fully paid medical, dental, and vision insurance

• 401(k) with company match (up to 4%)

• Flexible Spending Account (FSA)

• Paid Time Off and paid holidays

• Annual benefit allowance of $3,600 (paid bi-weekly)

• Supplemental short-term and long-term disability insurance

Why Join KIC

At KIC, we design and build thermal measurement tools used by electronics manufacturers around the world. The work we do in our facility directly supports customers who rely on our technology to improve their manufacturing processes.

You’ll be part of a team that builds products supporting the technology people rely on every day.

Apply here:

Senior Director of Warehousing & Assembly Operations

About the Role

This is a rare opportunity to step into a highly visible leadership role within a successful and growing organization. Dimora Brands continues to expand its footprint, product offerings, and operational capabilities, creating meaningful opportunities for leaders who want to make a lasting impact. The Senior Director of Warehousing & Assembly will lead high-performing teams across a multi-site network. This role offers the ability to directly influence strategy, drive measurable operational improvements, and implement transformative change across the company. For an ambitious operations leader, this position provides significant exposure, executive partnership, and clear opportunities for continued advancement within a thriving organization.

About Dimora Brands

Dimora Brands is the parent company of industry-leading brands including Hardware Resources, Top Knobs, Wolf Home Products, Atlas Homewares, and Task Lighting. Across our portfolio, we design, engineer, manufacture, and distribute decorative and functional hardware, cabinet organizers, cabinets, wood products, and LED lighting solutions.

We proudly stock over 24,000 SKUs and ship same-day from strategically located distribution centers nationwide. Our success is driven by operational excellence, hard work, and a strong commitment to serving manufacturing, showroom, wholesale, retail, and e-commerce customers. At Dimora Brands, we foster a high-performance, team-oriented culture where leaders are empowered to build, innovate, and drive meaningful impact.

Position Summary

The Senior Director of Warehousing & Assembly is a network-wide operations leader responsible for the strategic direction, performance, and continuous improvement of:

• Hardware Resources (warehouse functions/ cabinet assembly)
• Top Knobs warehouse network
• Task Lighting Operations (assembly/warehouse functions)

This role leads a multi-site distribution and assembly network and is accountable for driving operational excellence across Safety, Quality, Delivery, Cost, and Talent. The Senior Director ensures standardized processes, consistent execution, strong financial performance, and best-in-class customer service across all facilities. The Senior Director will take well-established, well-functioning operations and engage in continuous improvement to strive for excellence in all key areas.

This leader will function as a change agent, building high-performing teams, implementing standardized operating procedures (SOPs), and driving Lean process improvements across the network. This role requires a strong cross-functional partnership with Sales, Customer Service, Product Quality, Logistics, Supply Chain, and Executive Leadership to ensure operational alignment and customer satisfaction.

Key Responsibilities

Network Operations Leadership

• Provide strategic and operational leadership for all Dimora Brands warehousing/cabinet assembly and Task Lighting assembly operations.
• Lead and develop DC Managers and site leadership teams.
• Ensure all facilities are staffed, trained, equipped, and operating within company guidelines and performance expectations.
• Serve as escalation point for operational performance gaps and customer service issues.

Performance & KPI Accountability

• Drive execution across all key performance metrics:
• Safety
• Quality
• Delivery / Service Levels
• Cost Management
• Talent Development
• Establish and monitor standardized scorecards across all sites.
• Identify performance gaps and implement corrective action plans with urgency and accountability.
• Own and manage regional operating budgets, capital planning, and cost control initiatives.

Scope

• Leads 10+ locations across the US
• Reports directly to the COO
• Manages a team of 225+ direct and indirect reports

Process Standardization & Continuous Improvement

• Lead the development, deployment, and compliance of standardized SOPs, playbooks, and best practices across all warehouse and assembly sites.
• Drive Lean leadership principles and structured problem-solving processes to eliminate waste and improve productivity.
• Lead focused improvement events and cross-functional initiatives.
• Ensure strong audit processes are in place to maintain operational discipline and process consistency.

Assembly & Value-Added Operations (Task Lighting and NorthPoint Cabinetry)

• Oversee assembly/manufacturing workflows to ensure quality, throughput, and efficiency targets are met.
• Partner with Product Quality and Engineering to ensure product standards and compliance.
• Optimize labor planning, workflow design, and material flow to support scalable growth.

Talent Development & Organizational Leadership

• Build and sustain a high-performance culture across all distribution and assembly operations.
• Assess training and development needs across the network.
• Coach and mentor warehouse and operations leaders; develop a strong leadership pipeline.
• Identify high-potential talent and create succession planning strategies.
• Foster a culture of accountability, collaboration, and continuous improvement.

Cross-Functional Collaboration

• Partner closely with Sales to ensure customer expectations and service requirements are met.
• Collaborate with Customer Service to quickly resolve order processing errors and service disruptions.
• Collaborate with Supply Chain, Logistics, and Product Quality to ensure seamless operational flow.
• Communicate disruptions, risks, and opportunities to Executive leadership in a timely and solutions-oriented manner.

Network Optimization & Growth Support

• Support new program launches, warehouse expansions, and facility relocations.
• Evaluate network capacity and scalability to support business growth.
• Lead technology adoption and warehouse systems improvements.
• Provide operational leadership during times of transition or leadership gaps within facilities.

What Success Looks Like

• A standardized, high-performing warehouse and assembly network operating with consistency and discipline.
• Strong safety record and compliance across all facilities.
• Improved service levels and reduced order errors.
• Measurable cost efficiencies and productivity gains.
• Engaged, developed leadership teams with a clear succession pipeline.
• A culture of urgency, accountability, and continuous improvement.

Qualifications

Experience

• 10+ years of progressive leadership experience in warehouse, distribution, logistics, and/or light manufacturing/assembly operations.
• Minimum 5+ years leading multiple sites with demonstrated success driving measurable performance improvement.
• Experience implementing Lean methodologies and structured problem-solving processes preferred.
• Proven success managing budgets and driving cost optimization initiatives.

Education

• Bachelor’s degree in Supply Chain, Logistics, Business, Operations Management, or related field required.
• MBA or advanced degree a plus.

Skills & Competencies

• Strong leadership presence and leadership capability.
• Demonstrated ability to lead through change across geographically dispersed teams.
• Deep understanding of inventory control, order processing, shipping systems, and warehouse technology.
• Strong financial acumen and data-driven decision-making skills.
• Lead by example work ethic
• Excellent communication and relationship management skills across multiple organizational levels.
• Highly organized and effective in fast-paced, multi-time-zone environments.

Additional Information

• Based at a Dimora Brands location (Dallas, Bossier, or Branchburg preferred).
• Regular travel to distribution and assembly facilities (approximately 25–40% domestic travel).
• Must conduct all company affairs in a professional and ethical manner.
• Post-offer background check and drug screen required.

Position Summary

We are seeking a highly skilled and detail-oriented Electro Mechanical Assembly Technician to join our manufacturing team. The ideal candidate will have experience assembling complex, multi-faceted assemblies and sub-assemblies in a structured production environment. This role requires strong mechanical aptitude, a deep understanding of assembly hardware and consumables, and a commitment to quality and process control.

Attention to detail, adherence to quality standards, and the ability to work from engineering drawings and work instructions are critical for success in this position.

Key Responsibilities

• Assemble complex mechanical assemblies and sub-assemblies according to engineering drawings, work instructions, and specifications
• Interpret blueprints, BOMs, and assembly documentation
• Verify correct materials, hardware, and components prior to assembly
• Use hand tools, power tools, torque tools, pneumatic tools, and specialty fixtures appropriately
• Install various hardware types including fasteners, rivets, threaded inserts, pins, bushings, fittings, and mechanical components
• Apply proper assembly consumables (adhesives, sealants, thread lockers, lubricants, etc.) per specifications
• Perform in-process inspections and verify dimensional and visual quality requirements
• Maintain traceability and material verification in accordance with quality system requirements
• Document assembly steps and record required production data accurately
• Identify and escalate quality issues or discrepancies
• Maintain a clean, organized, and safe work environment
• Support continuous improvement initiatives within the production process

Required Qualifications

• 2+ years experience in mechanical assembly (manufacturing environment preferred)
• Experience with complex, multi-component assemblies and sub-assemblies
• Strong understanding of mechanical hardware types and proper installation methods
• Knowledge of assembly tools including torque wrenches, drills, presses, and precision measuring tools
• Familiarity with assembly consumables and proper application techniques
• Ability to read and interpret engineering drawings and technical documentation
• Experience working within a quality management system
• Strong attention to detail and commitment to producing high-quality work
• Ability to verify materials and components against documentation
• High mechanical aptitude

Preferred Qualifications

• Experience in aerospace, industrial equipment, or precision manufacturing
• Familiarity with AS9100, ISO 9001, or similar quality systems
• Experience with material traceability and inspection documentation
• Ability to perform basic quality inspections using calipers, micrometers, and gauges
• Experience working with ERP or manufacturing tracking systems

Key Competencies

• Detail-oriented and process-driven
• Quality-focused mindset
• Strong organizational skills
• Ability to work independently and as part of a team
• Strong problem-solving skills
• Dependable and accountable

Physical Requirements

• Ability to stand for extended periods
• Ability to lift up to 50 lbs
• Ability to use hand tools and perform repetitive tasks