Assembly Language Compiler Masm Jobs in Usa

• Works assembling connectors per Blue prints and verifying process
• Setup and run wire marking machines per blue prints and verify quality
• Positions parts to be assembled by following blue prints and Standard Work Instructions.
• Works at station as member of assembly group assembling one or more specific parts to meet production requirements.
• Positions parts in specific opening and screws or bolts them in place.
• Solders/Welds parts by following schematic, blueprint, and Standard Work Instructions to assemble final unit.
• Verifies correct assembly of final unit.
• Ability to test unit with related test fixture.
  

• Other duties as assigned
• Supports any other areas as/if required
  

• Previous experience in a manufacturing / Assembly role
• Soldering/Welding
• High School diploma or GED
• Must be able to read blue prints and/or schematic reading
• Finger dexterity
• Hand-eye coordination
• Ability to verify function of unit per final blueprint
• Effective communication skills in English with the ability to read, speak, and understand English.
  

• 
  
• Perform preventive maintenance inspection before the start of each shift as outlined on the Preventive Maintenance Check Sheet. Apply oil or grease to specified areas. Confirm the operability of all detectors.
  
• The ability to perform a more comprehensive PM on the machines including but not limited to oil changes.
  
• Basic troubleshooting of chain assembly equipment to understand the alarm messages, identify what this issue is and how to correct the issue.
  
• The assembly line consists of the following machines/operations: roller link assembly, chain assembly, riveting, pre-stressing, articulation checking, center distance measuring, automatic cutting, and endless operation, washing, final inspection, and packing.
  
• Adhere to work standards. Responsible for maintaining production schedules, quality control records, chain assembly records, shipping charge numbers, and the traceability records for each charge of chain and referring any unusual problems to the departmental supervisor.
  
• Prepare test samples for quality control per work standard. Record production and any other data required utilizing various forms as directed.
  
• Utilize a machine-monitoring system to record downtime.
  
• Detect faulty operation or defective material and report these and other unusual conditions to the group leader or supervisor.
  
• Maintain work area and equipment in a clean and orderly condition and follow standard safety regulations.
  
• Perform other similar and associated duties as required or directed.
  

• 
  
• High school diploma or equivalent preferred; equivalent relevant experience may be considered
  
• 2-5 Years of experience running multiple machines and performing preventative maintenance.
  
• Safety First mindset
  
• Strong focus on Quality
  
• Ability to work well in a team environment
  
• Ability to work in a fast-paced environment
  
• Must have good mechanical aptitude and problem-solving skills
  
• Ability to use material handling devices such as hand trucks, and hydraulic lift trucks.
  
• Basic Computer Skills.
  

• 
  
• A competitive compensation package, including medical and dental benefits, life insurance, and generous 401(k) match and profit sharing.
  
• Paid vacation time
  
• Step increases
  
• Shift differential pay
  
• Weekly pay
  

• 
  
• Assemble, bond, and finish composite parts and subassemblies
  
• Perform secondary bonding, hardware installation, drilling, trimming, and sanding
  
• Prepare bonding surfaces and mix/apply structural adhesives per specifications
  
• Align, fit, and inspect parts to meet dimensional and tolerance requirements
  
• Follow assembly drawings, travelers, and work instructions
  
• Complete required manufacturing and quality documentation
  
• Support rework, repair, and continuous improvement activities
  
• Adhere to safety, environmental, and quality system requirements
  

• 
  
• Provide daily direction and task assignments to composite assembly personnel
  
• Serve as the primary technical resource for troubleshooting bonding and assembly issues
  
• Train and mentor technicians on proper techniques, safety practices, and quality standards
  
• Monitor workflow to ensure schedule adherence and efficiency
  
• Coordinate with production supervisors, engineering, and quality to resolve issues
  
• Promote a safe, organized, and compliant work environment
  
• Provide input on performance feedback and serve as acting supervisor when required
  

• 
  
• Ability to read and interpret engineering and assembly drawings
  
• Familiarity with hand tools, measuring equipment, and bonding tools
  
• Understanding of adhesive bonding and surface preparation techniques preferred
  
• Strong mechanical aptitude and attention to detail
  
• Ability to work safely with chemicals and adhesives
  
• Effective communication and leadership skills
  
• Strong organizational and problem-solving abilities
  

• 
  
• High school diploma or equivalent required
  
• Prior experience in composite assembly, aerospace manufacturing, or mechanical assembly preferred
  
• On-the-job training may be provided for entry-level candidates
  

Role: Assembly Integration and Test Engineer

Pay: $90,000.00 - $110,000.00 per year

Job description:

Location: Boulder, Colorado

Employment Type: Full-time

Salary Range: From $90,000 to $110,000 depending on experience

About ThinkOrbital:

ThinkOrbital is developing breakthrough technologies to defend, service, and build in space. From pioneering autonomous welding in orbit to long-range X-ray imaging systems for space domain awareness and infrastructure inspection, we are redefining what’s possible in the final frontier. Our team is made up of driven engineers, scientists, and operators who thrive in a fast-paced, mission-focused environment.

Position Summary:

We’re looking for an Assembly Integration and Test Engineer to join our team, support all assembly integration and test activities across all our programs and products. This is a hands-on role that will involve close collaboration with a cross-disciplinary team etc.

Key Responsibilities:

· Perform hands-on assembly, integration, and testing of aerospace components, subsystems, and full systems

· Develop and execute test procedures, plans, and documentation to ensure compliance with technical and quality standards.

· Collaborate with cross-functional teams including design, systems engineering, and quality to resolve integration or test anomalies.

· Support environmental testing (vibration, thermal vacuum, EMI/EMC, etc.) and data analysis to validate system performance.

· Ensure accurate configuration control and documentation of hardware and test setups throughout the program lifecycle.

· Assist in troubleshooting issues and implementing corrective actions during assembly or testing phases.

· Interface with suppliers or test facilities as needed to support test activities or deliverables.

· Adhere to safety protocols and industry standards in a cleanroom, high-reliability environment, and radiation environment (X-Ray)

Mandatory Qualifications:

· Bachelor’s degree in Aerospace, Mechanical, Electrical Engineering, or a related field.

· Minimum of 3 years of experience in aerospace assembly, integration, or test.

· Strong understanding of aerospace hardware handling, contamination control, and verification processes.

· Excellent communication and documentation skills.

· Ability to work hands-on in a fast-paced, team-oriented environment.

· Self-starter with a strong sense of ownership; able to take initiative, work independently, and tackle unfamiliar or ambiguous technical challenges with minimal guidance

Certifications/Trainings:

· IPC J STD 001G, Requirements for Soldered Electrical and Electronic Assemblies

· IPC A 600, Acceptability of Printed Boards

· NASA STD 8739.1, Workmanship Standard for Polymeric Application of Electrical Assemblies

· NASA STD 8739.4, Workmanship Standard for Crimping, Interconnecting Cables, Harnesses, and Wiring

· ANSI/ESD S20.20, Electrostatic Discharge (ESD) Control

· Radiation Safety Training (X-Ray Cabinets)

What We Offer:

Competitive benefits and stock options

Health, Vision and Dental Insurance

Opportunity to shape next-generation space systems

A small, fast-moving team where your impact is tangible

Flexible Schedule

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Painter Spray A -Major Assemblies to join our Joint and Installation team in Everett and Renton, Washington.

As a Painter Spray A - Major Assemblies, you will be essential in ensuring the highest standards of quality and safety in the painting process for our aircraft. Your role will involve collaborating with team members to complete painting assignments while meticulously preparing surfaces to guarantee proper adhesion and finish. You will utilize various paint materials and techniques, including both spray and brush methods, to achieve flawless results that meet inspection requirements. Your attention to detail will be critical as you clean and service equipment, mask areas for painting, and coordinate with safety and environmental teams to ensure a compliant work environment. Additionally, you will operate automated spray equipment and curing ovens, monitoring conditions to maintain optimal performance throughout the painting process.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Collaborate with employees of varying classifications to ensure the completion of painting assignments for aircraft, missiles, or space vehicles.

• Perform touch-up and pickup painting using both spray and brush techniques, adhering to inspection requirements.

• Prepare surfaces to ensure proper adhesion, including corrosion removal and paint stripping as needed.

• Prepare various paint materials, such as primers, enamels, and lacquers, according to specifications.

• Clean and service spray guns, paint tanks, brushes, hoses, and related equipment after use.

• Mask and unmask areas to facilitate corrosion removal or painting operations.

• Set up all necessary equipment and supplies for painting operations, including fall protection and protective equipment.

• Coordinate with safety, environmental, and fire organizations to ensure the shop is prepared for painting operations.

• Operate automated spray equipment, such as robots, for preparation and painting tasks.

• Operate curing ovens and monitor related equipment to ensure compliance with specifications, including temperature and humidity.

• Monitor and maintain time-sensitive materials and processes throughout the painting operation.

• Support customer inspections as required and screen work instructions to ensure proper workflow.

• Apply decals, part markings, and wrap finished parts or assemblies as required.

• Recognize and report any discrepancies or malfunctions in equipment or processes per established procedures.

• Obtain and maintain necessary certifications and qualifications for the role, and perform established autonomous maintenance as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration.

Basic Qualifications:

• 1+ years of experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.

• 1+ years of experience using various types of paint equipment and applicators, such as HVLP, pneumatic, electrostatic, and others.

• 1+ years of experience mixing paints.

• 1+ years experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications.

• 1+ years of experience handling chemicals and/or hazardous materials

• Experience working from heights & using fall protection equipment with weight limitations.

Preferred Qualifications:

• 1+ year of experience performing aircraft or autobody painting and finishing operations.

• Completed 1+ year of autobody paint/collision repair in high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• This position offers relocation based on candidate eligibility.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $25.32/hour, with potential to earn up to $54.76/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 31, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

FUNCTION:

In an assigned area or cell, work with limited supervision to perform the assembly of Production aircraft parts as well as the teardown, and assembly of Overhaul & Repair designated aircraft parts.

TYPICAL DUTIES:

• 
  
• Performs fitting and assembly operations on various production aircraft parts.
  

• 
  
• Performs teardown and assembly of overhaul & repair aircraft parts.
  

• 
  
• Cleans and applies special adhesives to materials resulting in a permanent bonding of the materials. Sets up and controls furnace temperature in accordance with established specifications.
  

• 
  
• Must be capable of reading and interpreting blueprints, operation sheets, technical specifications and overhaul manuals.
  

• 
  
• Maintains necessary records and files.
  

• 
  
• Works with limited supervision.
  

• 
  
• Assists operators in a lower classification on assembly techniques as needed.
  

• 
  
• Performs temporary part marking, In process transfer marking and final part parking operations using Vibro Engraving, Electro-chemical Etch, Ink Stamp, Dot-Peening, and Paint marking with suitable legibility to meet drawing or customer specification requirements
  

• 
  
• Works under supervision with salary and hourly support groups to address the most complex problems.
  

• 
  
• Must possess a skill level that eliminates errors that cause nonconforming material and maintain a consistent level of high quality work. Identify non-conformances at time of occurrence. Recognize opportunities for non-conformances and notify management of need for action.
  

• 
  
• Actively participate in various aspects of Lean production and Continuous Improvement projects that drive efficiency improvements.
  

• 
  
• Must work safely at all times. Participate in safety improvement initiatives by raising any safety concerns and helping to come up with corrective actions.
  

• 
  
• May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department or cell objectives and to develop individuals' skills.
  

This position is currently accepting applications.

Apply Now

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airlines is excited to offer opportunities for a Sealer Aircraft Integral Fuel Tank Components to join our Joint and Installation team in Everett and Renton , Washington .

As a Sealer for Aircraft Integral Fuel Tank Components, you will play a vital role in ensuring the highest standards of quality and safety in the sealing and assembly processes. Your responsibilities will include working from blueprints and specifications to clean surfaces, apply sealants, and prepare fuel vents for leak tests. You will also perform necessary rework and apply corrosion preventative seals to maintain the integrity of fuel tank components. Attention to detail is essential as you assist with pressure testing operations and coordinate effectively with supervisors and team members to ensure seamless communication across shifts.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Work from blueprints, documents, standards, and other required specifications to complete assigned tasks.
• Obtain daily work assignments from the team leader or supervisor and read Installation Plans and applicable drawings to determine work areas.
• Select appropriate cleaning solvents and clean interior and exterior surfaces prior to sealing.
• Load sealing guns and clean sealing equipment, ensuring proper functionality.
• Hand mix sealant as required and perform rework or pickups on assigned assemblies.
• Assist with pressure testing operations as assigned.
• Use specified agents and procedures for tasks such as removing protective coatings, applying corrosion inhibitors, and reactivating paint surfaces.
• Ensure proper grounding of the aircraft prior to cleaning operations and set up ventilation equipment to supply fresh air in work areas.
• Keep supervisors informed of progress and coordinate information with employees on other shifts.
• Mask areas as required to facilitate corrosion removal or painting operations.
• Prepare fuel vents for leak tests and restore them to normal after testing.
• Apply corrosion preventative seal as required and measure, layout, and apply aerodynamic seals to skin gaps on leading and trailing edge panels.
• Submit completed jobs or in-process checks to inspectors for acceptance or rejection.
• Apply decals, metalcals, placards, and charts to specific locations on parts and assemblies as required.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications :

• 1+ years of experience with paints, coatings, finishes, and/or sealants.

• Experience in handling chemicals and/or hazardous materials.

• Experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.

• Experience working from heights & using fall protection equipment with weight limitations.

• Experience with safety process and/or procedures in a manufacturing or operations environment.

• Experience working with tools and following work instructions.

Preferred Qualifications:

• 1+ year of experience performing aerospace sealing.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

• Completed 1+ year of aerospace sealing in high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $25.00/hour, with potential to earn up to $51.82/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Aug. 28, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

• Deburr and assemble machined components for shipment according to company procedures.
• Operate hand tools, shop equipment, and machinery safely and efficiently.
• Move finished products between workstations, QC, and shipping areas as needed.
• Perform visual inspections to verify product quality and conformance to standards.
• Follow written and verbal instructions to complete assigned projects accurately and on time.
• Record work times, quantities, and materials used for each job.
• Maintain a clean, organized, and safe work area-returning tools and materials to designated areas daily.
• Follow all company policies and safety regulations, including proper use of personal protective equipment.
• Report equipment issues, product discrepancies, or injuries promptly to management.
• Support other departments when needed and perform other related duties as assigned.
  

• High school diploma or equivalent.
• Strong communication skills and a positive, service-oriented attitude.
• Ability to follow instructions precisely and pay close attention to detail.
• Proficient computer skills and the ability to learn new software.
• Epicor ERP experience (preferred).
• Previous customer service or manufacturing experience is a plus.
• Ability to stand for extended periods and lift up to 25 lbs.
  

• Comprehensive Training & Career Growth Opportunities
• 100% Company-Paid Medical and Dental Coverage
• Company-Paid Life and Disability Insurance
• 401(k) with up to 4% Matching
• Generous Paid Time Off & Paid Holidays
• Fun, Team-Oriented Work Environment
• Exciting Employee Events and Bonding Activities
  

Martinrea is a diversified global automotive supplier engaged in the design, development and manufacturing of metal parts, assemblies and modules, complex fluid management systems and aluminum products. We employ approximately 15,000 skilled and motivated people at manufacturing, engineering and technical centers in Canada, the United States, Mexico, Brazil, Germany, Slovakia, Spain, and China. Our business strategy leverages world-class technologies, motivated and talented people, and high-quality products.

Mission is to make people's lives better by:

Delivering outstanding quality products and services to our customers.

Providing meaningful opportunity, job satisfaction, and job security for our people.

Being positive contributors to our communities; and,

Providing superior long-term investment returns to our stakeholders.

Our strength is our people.

We invite you to explore a challenging and rewarding career at Martinrea in Tupelo, MS.

Benefits

Competitive Salary

Major Health Insurance Carrier

Dental Health Insurance

Vision Insurance

401K - match 50%

Short- and Long-term Disability

Required Qualifications:

• College diploma and/or combination of Grade 12 with minimum 3 years of hands-on
• Supervisory experience in a related field
• Good working knowledge of assembly, stamping and welding operations
• Excellent English Communication Skills (oral and written)
• Basic knowledge of computer skills
• Excellent organizational and time management skills
• Strong leadership and problem-solving skills
• Familiar with the Occupational Health and Safety Act and Regulations

Critical Success Factors:

• Excellent attendance
• Ability to work efficiently with minimum supervision and/or directions
• Ability to work in a team environment and be a team player and a team leader
• Strong leadership and interpersonal skills
• Excellent motivator and mentor
• Ability to maintain all production related records in an organized and tidy manner, use sound judgment in dispersing
• confidential information related to employee’s data
• Support and contribute to the Quality Systems and Environmental Management Systems Requirements
• Ensure that all duties and tasks are carried out in a safe and efficient manner and at no time is the employee or their
• co-workers placed in an unsafe condition

Responsibilities:

• Supervise the shift Team Leaders, Assembly Operators, Welders and the Forklift Operators
• for the department
• Ensure that product identification, traceability, process control, packaging instructions are being followed at all
• times
• Ensure all assembly personnel are following the Quality System and conform to quality standards
• Ensure all first off/last off procedures are being followed at all times
• Ensure LPA is performed as per schedule, follow up to close all outstanding issues within a reasonable time frame
• Responsible to train all personnel within the assembly department to meet company's target on productivity and efficiency and manage within the scheduled financial budget
• Oversee and maintain inventory levels of parts produced to meet scheduled targets
• Coordinate with other departments to ensure no unnecessary interruption of production requirements
• To train, develop, mentor, direct and discipline subordinates to ensure a productive, efficient and competent
• workforce to meet scheduled requirements in a safe environment
• Provide regular constructive feedback and communication to subordinates formally and informally on company policies, work procedures and work standards etc. and to ensure adherence to all policies and
• procedures at all times
• To make recommendation to Assembly Manager on the confirmation and/or disposition of employees within the probationary period
• Responsible for ensuring all training within the department is completed in a timely manner, documented and posted at each workstation. Provide on-the-job retraining as required.
• Assist in providing management reports and documentation of key measurable as required
• Maintain a system of communicating ongoing departmental performance to subordinates on a regular basis
• Ensure good housekeeping for the department and that all areas responsible are tidy and organized at all times
• Ensure subordinates follow Company policies on Health, Safety & Environment and PPE requirements
• Contribute to the continuous improvement initiatives on all aspects of the job and to encourage all subordinates to do
• the same

Martinrea International Inc. is proud to provide employment accommodation during the recruitment process. Should you require any accommodations, please notify us if you are contacted for a job interview.