Assembly Label Jobs in Usa
2,424 positions found — Page 9
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington.
As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes.
Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards.
To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations.
You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements.
Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities: Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks.
Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.
Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.
Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.
Initiate and document any nonconforming materials or assemblies according to specifications and procedures.
Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.
Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.
Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.
Inspect mockups of engineering design changes to ensure adherence to specifications.
Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes.
Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records.
Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required.
Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts.
Document discrepancies and report them to the appropriate personnel for resolution.
Assist in the training and instruction of lower-grade inspectors, providing guidance as needed.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs.
to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work on-site at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications : 3 years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).
3 years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators.
1 years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices.
Experience as a Quality Inspector.
Experience working with Microsoft Office (Excel, Word, PowerPoint).
Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
Ability to complete Fall Protection Training.
Preferred Qualifications: Experience inspecting welds / welds certification Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.) Typical Education & Experience: High school graduate or GED preferred.
Relocation: Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement : This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar.
27, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Position: Business Administrator
Role: Full Time in Person
Location: 1800 N American St, Philadelphia, PA
Compensation: $50k-70k per year, 15 days PTO, shares in equity plan and benefits
About US
FlashPCB is a US-based rapid PCB prototyping service. We are using AI and smart software to eliminate the traditional setup time and costs in the PCB manufacturing process. We give our customers the power to create, innovate, and experiment with their PCBA designs. We provide instant checkout of assembled PCBs with very short lead time.
What You’ll Do
The business administrator will possess strong organizational skills and a passion for providing exceptional support in a fast-paced environment. The role includes managing vendor communications via email and phone, printing packing slips and shipping labels using our logistics software, organizing production files and electronic components for assembly, processing invoices and payments, and providing administrative support to the executive team, including scheduling, correspondence, and document preparation.
Responsibilities:
- Communicate with vendors
- Prep and organize documents
- Create purchase orders
- Bill Customers
- Pay Invoices
- Manage Calanders
Qualifications Skills and Experience:
- Strong organizational skills with attention to detail.
- Proven work ethic with a get the job done mentality
- Computer literacy skills with proficiency in Microsoft Office Suite (Word, Excel, PowerPoint), Google GSuite (Gmail, Docs, Slides, Sheets) and QuickBooks.
- Ability to communicate effectively both verbally and in writing.
- A proactive attitude with strong problem-solving abilities is essential for success in this role.
- Ability to indipendantly manage projects
Why Join Us
At FlashPCB, you’ll be part of a small, fast-growing business with a flat structure where your voice matters and your work directly shapes our future. We’re transforming the PCB assembly industry, and every team member plays a key role in that mission. Our hands-on, collaborative environment offers the chance to expand your skills, take on new challenges, and grow alongside the company.
Company: Munters Corporation
About Us: Munters is a global leader in climate solutions for mission-critical processes. We offer innovative, efficient and sustainable solutions for customers in industries where controlling indoor humidity, temperature and energy efficiency is mission-critical. Climate control systems often account for a large percentage of the energy consumption in many of our customers' operations. With an optimal climate system, we can help them to more efficiently use energy or water resources and thereby reduce their climate and environmental impact. Sustainability is an important part of Munters' business strategy and value creation. We pride ourselves on fostering a dynamic and inclusive work environment where interns are valued members of the team and are given meaningful projects to work on.
Scope:
Perform duties to lay out, assemble, and weld any range of metal modules, including large complex units, in conformance with job specifications, working within the limits of standard or accepted practice.
Essential Duties:
- Work from bill of materials (BOM), drawings, welding symbols, process sheets, blueprints, production schedule, and check lists.
- undefined
- Move components into place from staging areas using cranes to rig and move large assemblies and units during construction process as required. Build fixtures as required for layout of components to required configuration for welding. Assemble and bolt components as required.
- undefined
- Clean components to remove contamination, layout and align in fixtures to suit welding requirements, and select filler metals based on information provided. Set up and operate AC/DC welding equipment, select electrodes, gas flow, amperage and other settings and weld components to suit requirements for configuration, structural strength, and visual appearance.
- undefined
- Verify conformance of first piece to specifications, using, angles, square, ruler, gauges, and measuring tape. Gauge work pieces randomly through run to ensure maintenance of settings and adjust as necessary.
- undefined
- Finish grind welds to meet cosmetic product standards. Visually inspect welds and complete production documentation, time records, and check lists.
- undefined
- Ensure welding equipment is maintained and in proper working order. Communicate maintenance requirements with supervisor.
- undefined
- Label completed parts with appropriate part number.
- undefined
- Stage completed parts for movement or move to subsequent operations to maintain workflow.
Other Duties:
- Perform or assist with any operations, as required to maintain workflow and to meet schedules and quality requirements.
- Maintain work areas in a clean and orderly condition. Consistently operate in keeping with all safety rules and requirements.
Other Duties: (Continued)
- Participate in any variety of meetings and work groups to integrate activities, communicate issues, obtain approvals, resolve problems, and maintain specified level of knowledge pertaining to new developments, requirements, and policies.
- Perform other related duties as assigned.
- Stage completed parts for movement or move to subsequent operations to maintain workflow.
Tools and Equipment:
Use MIG and TIG welders, hand tools, power tools, welding machines, gas tanks, and torches, clamps, fixtures, grinders (bench and hand), pneumatic die grinder, measuring devices and fork lift.
Minimum Personal Protection Equipment (PPE):
- Safety Glasses - ANSI Z87.1
- Welding Helmet, minimum shade #9 - ANSI Z87.1
- Leather Welding Gloves
- Leather Welding Apron
- Gloves - ANSI Cut 3
- Foot Protection, Steel Toe - ASTM F2413-11
Physical Demand:
- Frequently push with up to 120 lbs. of force.
- Occasionally push and pull up to 50 lbs.
- Frequently lift and carry up to 40 lbs.
- Frequently stand, walk, bend, crouch, kneel, climb, maneuver, stoop, squat, grasp, and reach.
- Visual and aural acuity
- Frequently stand, walk, bend, crouch, kneel, climb, maneuver, stoop, squat, grasp, and reach.
Experience / Requirements:
- TIG welding; Gas Tungsten Arc Welding (GTAW)
- MIG welding, Gas Metal Arc Welding (GMAW)
- American Welding Society (AWS) Plate Welding Certificate or equivalent.
Benefits:
1. Competitive Salary
2. Comprehensive health, dental, and vision insurance plans
3. Generous vacation and paid time off
4. 401K retirement savings plan with employer matching
5. Professional development opportunities, including tuition reimbursement, and conference attendance
6. Company-sponsored social events and team-building activities
7. State-of-the-art equipment and tools to support your work
Equal Opportunity Employer:
We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.
All offers are contingent on a pre-employment drug test and background check, as applicable for the position.
At Rite-Hite, your work makes an impact. As the global leader in loading dock and door equipment, we design and deliver solutions that keep our customers safe, secure, and productive. Here, you'll find innovation, stability, and the chance to grow your career as part of a team that's always looking ahead.
As a Buyer/Planner, you will ensure timely material availability and support efficient production flow by your work in managing both purchasing and production schedules at our largest manufacturing plant. At this location we manufacture products which include loading dock systems, industrial doors, and fabric ductwork to name a few! You will work cross-functionally with Production, Inventory Control, Sales, and Suppliers to balance supply chain efficiency with cost, quality, and delivery objectives.
This role has a work schedule starting between 6AM-6:30AM, fully onsite due to the cross collaborative nature.
What You'll Do
PRE-PRODUCTION TASKS:
- Work with production supervisors, applications, and CSR's to establish a final assembly schedule that will support our customers' needs and maximize production efficiency.
- Adjust production schedules accordingly based on capacity requirements/changes.
- Track production progress, identify potential delays or issues, and take corrective actions.
- Contact sales representatives on shipment delays.
PRODUCTION TASKS:
- Manage inventory levels utilizing MRP.
- Schedule and expedite the delivery of purchased materials to support future and current production schedule.
- Responsible for executing and supporting the quality system and procedures, rejections related to non-conforming material.
- Create and manage work orders for all manufactured stock parts.
- Resolve shipping and receiving issues to ensure prompt and accurate inventory transactions.
- Communicate errors or process breakdowns in real time and coordinate efforts to resolve issues with appropriate personnel.
- Negotiate, identify, document, cost savings opportunities.
- Develop inventory and planning processes to increase the accuracy of lot sized parts, nonstock programs, SMI programs or other industry practices.
- Identify slow moving or inactive inventory and recommend disposition.
- Process/print documentation related to production as needed, shipping labels, serial labels, pick slips,etc..
- Communicate to suppliers their performance based on quality, warranty, and delivery.
- Maintain JDE item branch data.
What We Look For:
- Associate's degree (A. A.) or equivalent from two-year college or technical school; or six months to one-year related experience and/or training; or equivalent combination of education and experience.
- Understanding of MRP and various contemporary planning and scheduling techniques.JD Edwards 9.2 experience strongly preferred.
- Ability to read blueprints, understand specifications, work in a self-directed environment, and facilitate group activities.
- Advanced proficiency in Microsoft Excel and Word.
- APICs certification a plus
#LI-ONSITE
#LI-LC1
What We Offer
At Rite-Hite, we take care of our people - because when you're supported, you can do your best work. Our benefits are designed to support your health, your future and your life outside of work:
Health & Well-being: Comprehensive medical, dental, and vision coverage, plus life and disability insurance. A robust well-being program with an opportunity to receive an extra day off and more.
Financial Security: A strong retirement savings program with 401(k), company match, and profit sharing.
Time for You: Paid holidays, vacation time, and personal/sick days each year.
Join us and build a career where you're supported - at work and beyond.
Rite-Hite is proud to be an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic under federal, state, or local law.In accordance with VEVRAA, we are committed to providing equal employment opportunities for protected veterans.We are also committed to maintaining a drug-free workplace for the safety of our employees and customers.
Do you have a taste for something big? If you're looking for the opportunity to reach your potential, consider Conagra Brands as your next career destination. Conagra Brands in Darien, WI a local supplier of Birds Eye products, is seeking qualified individuals to fill a Production Specialist role in the production department for D shift. Reporting to Production Supervisors, you will work on-site at one of Conagra's largest manufacturing facilities with over 800 employees.
As a Production Specialist, you will play a key role in supporting production operations by ensuring product quality, packaging compliance, and adherence to safety and food handling standards. This position requires attention to detail, the ability to work in a fast-paced environment, and a commitment to teamwork and continuous improvement.
Key ResponsibilitiesDevelop a working knowledge of production schedules and learn to read and follow schedule instructions.
Form and assemble cases to meet production requirements and specifications.
Monitor auto-filled bags or trays for required fill weight, back seal, end seal, label placement, date code, and label accuracy.
Report deviations from product requirements to operators or supervisors. Ensure cases enter the case sealer correctly.
Visually inspect products and ingredients for blemishes, flaws, extraneous material, or discoloration.
Stop production and report any serious deviation from requirements or equipment malfunction.
Maintain housekeeping in the work area.
Assist operators with start-up, production, changeover, and shutdown activities.
Perform other duties as assigned by management.
Ability to meet physical requirements to perform all duties safely.
Effective communication skills to perform all duties.
Willingness to learn and follow:
Food handling and packaging practices
Safe working practices
Good Manufacturing Practices (GMP)
Ability to work well as part of a production team.
Reliable and consistent attendance with strong attention to duties.
Ability to work accurately with minimal supervision.
Our Benefits
We care about your total well-being and will support you with the following, subject to your location and role:
Health: Medical, dental and vision insurance, company-paid life, accident and disability insurance
Wealth: Great pay, 401(k)/pension eligibility, financial wellness programs and stock purchase plan
Growth: Career development opportunities, employee resource groups and team collaboration
Balance: Paid-time off and volunteer opportunities
Our Company
At Conagra Brands, we have a rich heritage of making great food. We aspire to have the most impactful, energized and inclusive culture in food. As a member of our 18,000+ person team across 40+ locations, you are empowered to reach your potential, make an impact and own your career. We're in the business of building champions within our people and our iconic brands like Birds Eye, Slim Jim and Reddi-Wip.
Our focus on innovation extends beyond making great food, it also reflects our commitment to embracing new solutions that positively impact our team, the communities we serve and the health of our planet. Foodies Welcome.
Conagra Brands is an equal opportunity employer and considers qualified applicants for employment without regard to sex, race, color, religion, ethnic or national origin, gender, sexual orientation, gender identity or expression, age, pregnancy, leave status, disability, veteran status, genetic information and/or any other characteristic or status protected by national, federal, state or local law. Reasonable accommodation may be made upon request.
Become part of an inclusive organization with over 40,000 teammates, whose mission is to improve the health and well-being of the unique communities we serve.
Are you an experienced Surgical Technologist looking to specialize in Heart and Vascular surgery ? The UNC Rex Heart & Vascular Operating Room may be the perfect fit for you.
Our CVOR features five dedicated operating rooms for heart and vascular cases, and we performed over 1,400 cardiovascular surgeries last year .
Our CVOR offers an in-depth orientation for new hires, and we are proud of our highly skilled surgeons and perioperative team who deliver excellent, comprehensive, state-of-the-art care to every patient.
The CVOR Surgical Technologist is an integral member of the surgical team, responsible for maintaining a sterile field, anticipating surgeon needs, and assisting with instruments, supplies, and equipment throughout cardiovascular procedures.
Surgical technologists collaborate closely with surgeons, nurses, and anesthesia providers to ensure safe, efficient, and high-quality patient care in the operative setting.
Become part of UNC Rex , a five-time Magnet–designated hospital for nursing excellence , whose mission is to improve the health and well-being of the unique communities we serve.
Our CVOR schedule is Monday through Friday, 0600–1630 , with call requirements for evenings, nights, and weekends.
Experience: Minimum 1 year as a Surgical Technologist required CVOR experience strongly preferred, including cardiac (CABG, valves, TAVR, ECMO, Impella) and vascular procedures (EVAR, TCAR) Summary: The Surgical Technologist III provides support for surgical and interventional cardiac and/or vascular cases, facilitating the safe and effective conduct of invasive surgical procedures, ensuring that the operating room environment is safe, that equipment functions properly, and that the operative procedure is conducted under conditions that maximize patient safety.
Surgical technologists possess expertise in the theory and application of sterile and aseptic technique and combine the knowledge of human anatomy, surgical procedures, and implementation tools and technologies to facilitate a physician's performance of invasive therapeutic and diagnostic procedures.
Competent to perform surgical scrub duties across multiple services.
Must function as a subject matter expert (SME), PI project, or another unit project when needed.
Call is required to ensure emergent patient needs are met.
Responsibilities: 1.
Performs all the duties and responsibilities of Level II plus the following: 2.
Provides leadership at unit level to correct safety/clinical quality deficiencies.
Leads/implements changes at the unit level.
3.
Assists in the development of policies, procedures, and protocols at the department level 4.
Performs technical skill duties in all operating room specialty service areas, ensuring that proper technical practices are employed according to accepted standards of process.
5.
Provides proper maintenance, assembly, handling, and sterilization techniques of specialty instrumentation.
Facilitates efficient room turnovers.
6.
Demonstrates knowledge and proper handling of surgical implants related to surgical specialty focus area.
7.
Demonstrates advanced knowledge and practice of aseptic and surgical technique.
Proactively identifies contamination and/or breaks in aseptic technique and implements corrective actions.
8.
Performs surgical counts.
Follows policies and procedures for incorrect counts and reports discrepancies appropriately.
9.
Assists in the proper identification, preparation, handling, and labeling of surgical specimens.
Labels drugs and solutions; monitors quantities used.
10.
Actively participates in the planning and set up of instruments, supplies, and surgical drapes in an organized manner to provide optimal accessibility during the procedure.
Assists in picking cases and planning of instrument needs.
11.
Assists the surgeon, demonstrating an understanding of the patient's anatomy and abnormalities which affect the surgical procedure.
Assists the registered nurse during the intraoperative implementation phase of nursing practice.
12.
Recognizes and modifies scrubbing procedures based on pertinent information to develop modifications to standard approaches to care and communicates with the surgical team.
Responds to surgical emergencies and follows hospitalwide emergency management plans.
13.
Inventories, receives, and stores supplies under the direction of leadership.
Identifies and reports defective instruments, supplies, and equipment.
Assists with restocking operating/procedure rooms and sub-sterile areas.
Coaches team to anticipate resources.
14.
Mentors Surgical Tech peers in collaboration with leadership and educator.
Serves as primary preceptor for new hires, on the job trainees, and to scrub role for CVOR.
Participates in teaching, guiding, and evaluating the performance of peers during orientation and annual review process.
Identifies and communicates educational needs with leadership and educator.
Assesses department-wide learning needs and participates in planning activities to meet those needs.
15.
Serves as Primary Surgical Technologist resource for surgical specialty.
16.
Collaborates with other health care professionals in the development of surgical budgetary requirements.
When applicable, recommends cost containment strategies to increase organizational fiscal outcomes.
17.
Participates in data collection for research projects under the direction of an RN.
Other Information Other information: Education Requirements: ● High School Diploma or GED Graduate of an accredited Surgical Technology or Nursing Program; or Graduate of a Military Training Program in Surgical Technology; or Formal education/training may be substituted for individuals with 5 years of prior experience as a surgical tech Licensure/Certification Requirements: ● Basic Life Support (BLS) for Healthcare Provider certification ● Certified Surgical Technologist (CST) through The National Board of Surgical Technology and Surgical Assisting or Tech in Surgery (TS-C) through The National Center of Competency Testing Professional Experience Requirements: ● 3 years Knowledge/Skills/and Abilities Requirements: ● Successful completion of service specific portion of the UNC Health Surgical Technologist competencies.
● Strong communication skills/customer service relations ● Excellent organizational/priority setting skill.
● Ability to function effectively as a mentor & team player ● On-call (May be a requirement depending on the position).
Job Details Legal Employer: NCHEALTH Entity: UNC REX Healthcare Organization Unit: Rex CVOR Work Type: Per Diem Standard Hours Per Week: 4.00 Salary Range: $26.85
- $38.61 per hour (Hiring Range) Pay offers are determined by experience and internal equity Work Assignment Type: Onsite Work Schedule: Variable Location of Job: US:NC:Raleigh Exempt From Overtime: Exempt: No This position is employed by NC Health (Rex Healthcare, Inc., d/b/a NC Health), a private, fully-owned subsidiary of UNC Heath Care System.
This is not a State employed position.
Qualified applicants will be considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, disability, status as a protected veteran or political affiliation.
UNC Health makes reasonable accommodations for applicants' and employees' religious practices and beliefs, as well as applicants and employees with disabilities.
All interested applicants are invited to apply for career opportunities.
Please email if you need a reasonable accommodation to search and/or to apply for a career opportunity.
d24ad0b8-823f-4e68-a892-2986ccdf7392
Emergency Care Center Technician Senior works with the RNs in the Emergency Room to provide care to patients. They have special skills beyond those of a basic Emergency Technician; for example, they can perform venipuncture, dress wounds, remove staples and sutures, and measure peak expiratory flow rate.
Responsibilities:
Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders.Gives basic care to patients in a compassionate manner.Takes and records the following vital signs and reports any change or abnormal findings to the RN: Temperature, pulse, respiration rate, and blood pressure.Gives the following treatments, maintaining respect for patient's privacy: weigh patient, test urine (acetone, sugar, blood), apply warm/cold compresses, apply ice caps, and care for the body after death.Collect specimens according to RN's instructions and to the procedure. Urine and stool specimens are labeled and taken to the lab. Also performs Accuchecks/blood sugar.Assists patients to and from the bathroom.Positions patients according to RN's instructions (fowler, semi-fowler, etc.) and changes position as frequently as ordered and using good body mechanics.Assists with stringing IVs under the direction of the Emergency Department nurse.Assumes certain nursing functions and responsibilities under the guidance of a Licensed nurse.Is responsible for the following in the admission of the patient: bringing the patient to the room from admitting or ER as needing; assisting the patient to bed and applying armband; obtaining and reporting to RN vital signs, height, weight, and history of allergies; assuring patient is comfortable and orientated to surroundings; and assisting RN with an initial interview.Is responsible for instructing and explaining the following in patient/family orientation: call signal, smoking policy, and side rail policy. Is responsible for the following inpatient discharge: helps patient collect personal belongings; takes patient per wheelchair to lobby or car; and removes all equipment from the room, cleans, and returns to SPD or a storage area.responsible for the following in transferring patients.Collects patient's personal belongings, assembles equipment to go with the patient, accompanies the patient to a new room, and stays with the patient until floor nurse enters the room.Is respectful to patient's right to privacy and confidentiality: knocks before entering the room, does not expose patient unnecessarily in giving care, closes the door when giving a treatment, and keeps patient information confidential.Answers call lights promptly and with a pleasant, helpful attitude.Observe the RN performing the following procedure and nursing functions. Then after a satisfactory return demonstration to the RN, the EDT may perform procedure and nursing functions independently, under the direction of the RN.Check restraints frequently to make sure the patient has not removed them or that they are neither too loose nor too tight. Obtains permission of RN before removing them for any reason.Notifies RN of any "beeping" infusion pumps. Checks fluid level in the bag and notifies RN when it is low.Notifies RN immediately if any swelling, redness, or if the patient complains of anything. Assembles IV equipment.without receiving instruction from the ER Nurse.Inserts Foley catheter using good technique and displaying proper knowledge about catheterizing patients.Assures that there is no pull on the catheter while giving care. Assures that there are no kinks in the catheter or loops that fall down below the level of urine in the drainage bag. Assists the RN in giving Foley catheter care. Collect specimens as instructed by RN.Is conscious of maintaining a sterile atmosphere by knowledge of sterile technique.Demonstrates proper cleansing and preparation of wounds. Can properly assist physicians with suture repairs.Can properly suction secretion/fluid from mouth, throat, and nose.Is knowledgeable in shock management by knowing properly apply pressure to a bleeding wound. Can properly apply pneumatic anti-shock trousers.Can properly apply cardiac monitor (EKG) leads.Can properly handle fractures and apply splints and slings as physician orders. Can fit the patient's crutches properly. Knows and utilizes proper body mechanics.Understand the importance of the "No Smoking" sign on the door. Replace the mask or cannula if they become displaced. If the tent is in use, ensure that the ends of the tent are tucked in at all times. Promptly reports to RN if the patient complains or looks like having difficulty breathing.Assists physician with application of casts and splints. Assumes position of the limb is maintained as instructed by RN. Notices swelling, coldness, redness, or discoloration of toes or fingers and reports to RN. Reports any bleeding through the cast or complaints of pain to the RN.Ensures side rails remain up and the patient remains in a bed after the pro-op medication is given.Applies anti-embolic hose appropriately and in the correct size.Assist in moving the patient to the stretcher.Safely performs surgical shaves and preparation of skin.Takes vital signs as requested by RN for post-op care. Assists with turning, coughing, and deep breathing as instructed by RN.Can properly perform EKGs.Performs phlebotomy skills.Contributes toward maintaining a clean, safe environment for the patient and assumes certain responsibilities for the care and use of equipment.Ensures beds are in low position except when raised to give care and are locked at all times.Adheres to procedures for transferring patients to chairs, wheelchairs, and stretchers and in transporting patients in wheelchairs and stretchers.Ensures that the stretcher is locked.Ensures that there is a clear pathway from patient door to bedside at all times.Assists in maintaining a clean environment by practicing good hand washing.Adheres to isolation procedures.Reports condition of un-cleanliness on the unit to Shift Coordinator.Knows the use and operation of equipment he/she is required to use.Knows the care and location of all other equipment used on the unit.Uses supplies economically and only for the use intended.Knows how to stock and maintain equipment in the department.
Job Requirements:
Education/Skills
Certification required.Experience
Two (2) years of patient care experience in an acute care hospital or EMT field/Emergency Care Setting required.Licenses, Registrations, or Certifications
EMT license required.BLS required.
Work Schedule:
PRN
Work Type:
Per Diem As Needed
AdaptHealth Opportunity – Apply Today!
At AdaptHealth we offer full-service home medical equipment products and services to empower patients to live their best lives – out of the hospital and in their homes. We are actively recruiting in your area. If you are passionate about making a profound impact on the quality of patients’ lives, please click to apply, we would love to hear from you.
Warehouse Technician (Driving)
The Warehouse Technician will process orders, prepare items for shipment and receive incoming inventory. Where applicable also responsible for cleaning and disinfecting returned equipment, cleaning room maintenance, stocking and staging inventory, and inventory maintenance. The technician assists the supervisor or manager in pulling and loading equipment for delivery in addition to assembly of equipment when necessary, maintaining confidentiality and all other aspects of HIPAA compliance are essential in this job. Employees in this position may also be requested to deliver equipment to patients and/or facilities.
Essential Functions and Job Responsibilities:
- Performs data entry in appropriate applications, updates shipping information, and tracks orders.
- Completes clerical tasks including faxing, scanning, filing, and general phone calls.
- Prepares shipping containers in advance and creates labels.
- Reviews itemized customer lists; locates and assembles outgoing merchandise to fulfill requests.
- Verifies contents of outgoing packages against invoices or bills of lading.
- Receives and opens merchandise shipments, processes packing slips or invoices, and safely stores items.
- Documents returned items and cleans equipment following the Branch Maintenance and Cleaning Guidelines
- Retains knowledge of and consistently adheres to procedures for the use of Personal Protective Equipment (PPE), infection control, and hazardous materials handling.
- Routinely cleans warehouse area pursuant to Standard Operating Procedure (SOP), discards waste material daily and maintains a clean facility.
- Assists in the stocking, tracking, and replenishment of inventory.
- Collects and delivers packages to the shipping area.
- Responsible for communicating actual and potential stock shortages or outages to the warehouse manager in a timely manner to assure adequate inventory level.
- Responsible for monitoring expiration dates to assure supplies are returned or re-inventoried per company guidelines.
- Delivering equipment (when requested):
- Follows Driving Policy and completes required driver training.
- Educate customers in proper use and care of respiratory and HME equipment in a home setting
- Complete written patient visits reports following setup and follow-up visits as required
- Assist with customer equipment problems under emergency conditions
- Process all orders in a timely, accurate manner
- Perform patient assessment and re-assessment for patient care
- Perform routine preventative maintenance and simple repairs on equipment as required in accordance with company policies
- Report equipment hazards and/or product incidents as required in accordance with company policies and procedures
- Assume on-call responsibilities during non-business hours in accordance with company policy
- Maintain patient confidentiality and function within the guidelines of HIPAA
- Completes assigned compliance training and other educational programs as required
- Maintains compliant with AdaptHealth’s Compliance Program
- Perform other related duties as assigned
Competency, Skills and Abilities:
- Equipment repair or maintenance skills
- Problem solving skills with attention to detail
- Ability to prioritize and manage multiple tasks
- Ability to clean, test and repair home medical equipment.
- Ability to identify safety hazards and take the necessary precautions
- Accurately receive, stock, retrieve and load equipment and supplies.
- Work cooperatively with those contacted in the course of work.
- Ability to prioritize and manage competing priorities and tasks
- Independent decision making
- Computer skills including knowledge of Microsoft Office applications
Physical Demands and Work Environment:
- Must be able to regularly lift and/or move up to 85 pounds, frequently lift and/or move up to 100 pounds, and occasionally lift and/or move up to 160 pounds
- Must be able to stretch, bend, stoop and crouch and perform moderate to heavy physical labor while moving equipment and supplies
- Subject to long periods of sitting and driving
- Work environment may be stressful at times, as overall work activities and work levels fluctuate
- May be exposed to unsanitary conditions in some home settings
- May be exposed to hazardous materials, loud noise, extreme heat/cold, direct, or indirect contact with airborne, bloodborne, and/or other potentially infectious pathogen
- May be exposed to high crime areas within the service community
- Must be able to drive independently and travel as needed
- May be exposed to angry or irate customers
- Must be able to access the patient’s residence without assistance
- Ability to effectively communicate both verbally and written with customers with the ability to demonstrate empathy, compassion, courtesy, and respect for privacy.
Requirements:
Minimum Job Qualifications:
- • High School Diploma or equivalency
- • Construction, general manual labor, military and equipment repair, or maintenance skills would be considered related experience
- • Valid and unrestricted driver’s license in the state of residence
- Senior level requires two (2) years of work-related experience and one (1) year of exact job experience.
AdaptHealth is an equal opportunity employer and does not unlawfully discriminate against employees or applicants for employment on the basis of an individual’s race, color, religion, creed, sex, national origin, age, disability, marital status, veteran status, sexual orientation, gender identity, genetic information, or any other status protected by applicable law. This policy applies to all terms, conditions, and privileges of employment, including recruitment, hiring, placement, compensation, promotion, discipline, and termination.
PIee0da2f383a1-3631
DCI Donor Services
New Mexico Donor Services (NMDS) is looking for a dynamic and enthusiastic team member to join us to save lives!! Our mission at NMDS is to save lives through organ and tissue donation, and we want professionals on our team that will embrace this important work!! Coordinates and collaborates in the ordering and inventory of necessary supplies, the overall cleaning, and decontamination of recovery instruments and equipment needed for daily operations. Must be able to safely handle human tissue for transplantation. Ensures that quality recovery and operation practices are employed, and that policies, procedures, and local protocols are adhered to. Extensive travels are required.
COMPANY OVERVIEW AND MISSION
New Mexico Donor Services is a designated organ procurement organization (OPO) within the state of New Mexico – and is a member of the DCI Donor Services family.
For over four decades, DCI Donor Services has been a leader in working to end the transplant waiting list. Our unique approach to service allows for nationwide donation, transplantation, and distribution of organs and tissues while maintaining close ties to our local communities.
DCI Donor Services operates three organ procurement/tissue recovery organizations: New Mexico Donor Services, Sierra Donor Services, and Tennessee Donor Services. We also maximize the gift of life through the DCI Donor Services Tissue Bank and Sierra Donor Services Eye Bank.
Our performance is measured by the way we serve donor families and recipients. To be successful in this endeavor is our ultimate mission. By mobili
We are committed to diversity, equity, and inclusion. With the help of our employee-led strategy team, we will ensure that all communities feel welcome and safe with us because we are a model for fairness, belonging, and forward thinking.
Below are some of the key accountabilities/qualifications this position will hold:
- Performs aseptic recovery of musculoskeletal tissue and skin tissue. Assists in general practices such as room setup and breakdown, culturing, labeling, rinsing, and packaging tissue and reconstruction of the donor.
- Coordinates tissue donation process, procurement, shipping, and storage of tissue, while maintaining a positive, professional relationship with hospital, funeral home, and medical examiner staff. Safely and responsibly recovers human tissue for transplant and/or research while providing special care to ensure presentation for funeral purposes. Assembles team, supplies, and supplies, and donor to recover facility.
- Assists in receiving/releasing and transporting donors while ensuring policies and procedures are adhered to.
- Assists in the ordering and inventory of necessary ocular, tissue, and organ recovery supplies to ensure operations can run smoothly. Maintains stockroom areas through organi
- Assists in the overall cleaning, decontamination, assembly, processing, and dispensing of recovery instruments and equipment needed for daily operations.
- Coordinates with vendors for services and/or repairs needed for facility and/or equipment, the delivery of recovery instruments for sterilization, disposal of biohazard waste, and delivery/pickup of scrub services.
- Other responsibilities may include moving and lifting donors, drawing blood for infectious disease testing, and any other tasks deemed necessary by the Tissue Recovery Manager or Manager of Supplies, Equipment, and Logistics.
- Responsible for performing quality assurance inspection of all incoming orders, maintains logs according to policies and procedures, complies with safety regulations and maintains accurate records per protocols.
- Performs other duties as assigned.
The ideal candidate will have:
- High School Diploma or Equivalent.
- Prior experience in a related Allied Health field (i.e., EMT, ORT, CST, SA, ST or Tissue Banking)
- Valid driver’s license, as well as ability to pass all MVR (motor vehicle record) underwriting requirements.
- Working knowledge of computers and Microsoft Office applications to include Word, PowerPoint and Excel is required.
We offer a competitive compensation package including:
- Up to 184 hours of PTO your first year
- Up to 72 hours of Sick Time your first year
- Two Medical Plans (your choice of a PPO or HDHP), Dental, and Vision Coverage
- 403(b) plan with matching contribution
- Company provided term life, AD&D, and long-term disability insurance
- Wellness Program
- Supplemental insurance benefits such as accident coverage and short-term disability
- Discounts on home/auto/renter/pet insurance
- Cell phone discounts through Verizon
As a condition of employment, you must be able to obtain Hospital Badge and EMR Access from all of the DCI Donor Services Hospital partners.
You will receive a confirmation e-mail upon successful submission of your application. The next step of the selection process will be to complete a video screening. Instructions to complete the video screening will be contained in the confirmation e-mail. Please note - you must complete the video screening within 48 hours from submission of your application to be considered for the position.
DCIDS is an EOE/AA employer – M/F/Vet/Disability.
Compensation details: 25 Hourly Wage
PIf2d2090548dc-3631
They have special skills beyond those of a basic Emergency Technician;for example, they can perform venipuncture, dress wounds, remove staples and sutures, and measure peak expiratory flow rate.Responsibilities:Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders.Gives basic care to patients in a compassionate manner.Takes and records the following vital signs and reports any change or abnormal findings to the RN: Temperature, pulse, respiration rate, and blood pressure.Gives the following treatments, maintaining respect for patient's privacy: weigh patient, test urine (acetone, sugar, blood), apply warm/cold compresses, apply ice caps, and care for the body after death.Collect specimens according to RN's instructions and to the procedure.
Urine and stool specimens are labeled and taken to the lab.
Also performs Accuchecks/blood sugar.Assists patients to and from the bathroom.Positions patients according to RN's instructions (fowler, semi-fowler, etc.) and changes position as frequently as ordered and using good body mechanics.Assists with stringing IVs under the direction of the Emergency Department nurse.Assumes certain nursing functions and responsibilities under the guidance of a Licensed nurse.Is responsible for the following in the admission of the patient: bringing the patient to the room from admitting or ER as needing;assisting the patient to bed and applying armband;obtaining and reportingto RN vital signs, height, weight, and history of allergies;assuring patient is comfortable and orientated to surroundings;and assisting RN with an initial interview.
* Is responsible for instructing and explaining the following in patient/family orientation: call signal, smoking policy, and side rail policy.
Is responsible for the following inpatient discharge: helps patient collect personal belongings;takes patient per wheelchair to lobby or car;and removes all equipment from the room, cleans, and returns to SPD or a storage area.responsible for the following in transferring patients.Collects patient's personal belongings, assembles equipment to go with the patient, accompanies the patient to a new room, and stays with the patient until floor nurse enters the room.Is respectful to patient's right to privacy and confidentiality: knocks before entering the room, does not expose patient unnecessarily in giving care, closes the door when giving a treatment, and keeps patient information confidential.Answers call lights promptly and with a pleasant, helpful attitude.Observe the RN performing the following procedure and nursing functions.
Then after a satisfactory return demonstration to the RN, the EDT may perform procedure and nursing functions independently, under the direction of the RN.Check restraints frequently to make sure the patient has not removed them or that they are neither too loose nor too tight.
Obtains permission of RN before removing them for any reason.Notifies RN of any "beeping" infusion pumps.
Checks fluid level in the bag and notifies RN when it is low.Notifies RN immediately if any swelling, redness, or if the patient complains of anything.
Assembles IV equipment.without receiving instruction from the ER Nurse.Inserts Foley catheter using good technique and displaying proper knowledge about catheterizing patients.Assures that there is no pull on the catheter while giving care.
Assures that there are no kinks in the catheter or loops that fall down below the level of urine in the drainage bag.
Assists the RN in giving Foley catheter care.
Collect specimens as instructed by RN.Is conscious of maintaining a sterile atmosphere by knowledge of sterile technique.Demonstrates proper cleansing and preparation of wounds.
Can properly assist physicians with suture repairs.Can properly suction secretion/fluid from mouth, throat, and nose.Is knowledgeable in shock management by knowing properly apply pressure to a bleeding wound.
Can properly apply pneumatic anti-shock trousers.Can properly apply cardiac monitor (EKG) leads.Can properly handle fractures and apply splints and slings as physician orders.
Can fit the patient's crutches properly.
Knows and utilizes proper body mechanics.Understand the importance of the "No Smoking" sign on the door.
Replace the mask or cannula if they become displaced.
If the tent is in use, ensure that the ends of the tent are tucked in at all times.
Promptly reports to RN if the patient complains or looks like having difficulty breathing.Assists physician with application of casts and splints.
Assumes position of the limb is maintained as instructed by RN.
Notices swelling, coldness, redness, or discoloration of toes or fingers and reports to RN.
Reports any bleeding through the cast or complaints of pain to the RN.Ensures side rails remain up and the patient remains in a bed after the pro-op medication is given.Applies anti-embolic hose appropriately and in the correct size.Assist in moving the patient to the stretcher.Safely performs surgical shaves and preparation of skin.Takes vital signs as requested by RN for post-op care.
Assists with turning, coughing, and deep breathing as instructed by RN.Can properly perform EKGs.Performs phlebotomy skills.Contributes toward maintaining a clean, safe environment for the patient and assumes certain responsibilities for the care and use of equipment.Ensures beds are in low position except when raised to give care and are locked at all times.Adheres to procedures for transferring patients to chairs, wheelchairs, and stretchers and in transporting patients in wheelchairs and stretchers.Ensures that the stretcher is locked.Ensures that there is a clear pathway from patient door to bedside at all times.Assists in maintaining a clean environment by practicing good hand washing.Adheres to isolation procedures.Reports condition of un-cleanliness on the unit to Shift Coordinator.Knows the use and operation of equipment he/she is required to use.Knows the care and location of all other equipment used on the unit.Uses supplies economically and only for the use intended.Knows how to stock and maintain equipment in the department.Job Requirements:Education/Skills
* Certification required.Experience
* Two (2) years of patient care experience in an acute care hospital or EMT field/Emergency Care Setting required.Licenses, Registrations, or Certifications
* EMT license required.
* BLS required.Work Schedule:7AM
- 7PMWork Type:Full Time
