Arch Linux Iso Jobs in Usa

Job Summary

We are seeking a detail-oriented Quality & Regulatory Specialist to support compliance, quality management, and regulatory activities. This role ensures adherence to international regulations and standards, supports product registrations, and maintains the company’s Quality Management System (QMS). This position requires strong knowledge of medical device regulations (e.g., FDA, EU MDR, ISO 13485) and excellent cross-functional collaboration.

Essential Duties and Responsibilities

• Regulatory Affairs
• Lead preparation, submission, and maintenance of global regulatory filings (FDA 510(k)/PMA, EU MDR Health Canada and other international registrations).
• Serve as primary contact with regulatory authorities, notified bodies, and certification agencies.
• Interpret evolving regulatory requirements and communicate strategic implications to leadership.
• Provide regulatory input on new product development, product changes, labeling, and marketing materials.
• Monitor regulatory changes and advise internal teams on impact to product development and market access.
• Quality Management System (QMS)
• Maintain and improve the QMS in compliance with ISO 13485, 21 CFR Part 820, and applicable standards.
• Support internal and external audits, inspections, and corrective actions.
• Ensure document control, training, and change management processes are properly implemented.
• Product Lifecycle Support
• Partner with R&D, manufacturing, and clinical teams to ensure design control, risk management, and post-market surveillance compliance.
• Review and approve quality/regulatory aspects of labeling, promotional materials, and product changes.
• Support vigilance reporting, complaint handling, and CAPA activities.
• Cross-Functional Collaboration
• Provide regulatory and quality guidance during new product development.
• Liaise with regulatory authorities, notified bodies, and certification agencies.
• Train employees on regulatory and quality compliance topics.
• Perform other duties as assigned by manager or supervisor

Experience & Education Requirements

• Bachelor’s degree in engineering, life sciences, regulatory affairs, or related field or equivalent work experience in those areas.
• 5-8 years of experience in quality and/or regulatory affairs in the medical device industry.
• Strong knowledge of ISO 13485, ISO 14971, 21 CFR Part 11/820, EU MDR 2017/745.
• Experience with regulatory submissions (FDA, EU, or other international markets).
• Excellent analytical, organizational, and communication skills.

Preferred Skills & Abilities

• Medical device industry experience
• Medical Device regulation requirements knowledge, as applicable to responsibilities
• Regulatory Affairs / Quality Assurance Certification (e.g., RAC, CQE, CQA) is a plus.

Position Overview

The Transmission Planning & Interconnection Manager is responsible for leading

interconnection and transmission-related activities throughout the development and execution

of utility-scale renewable energy projects. Working under the guidance of senior

interconnection leadership, this role supports projects from early site screening through

construction and commissioning. Responsibilities include technical analysis, coordination

with utilities and system operators, oversight of interconnection studies, and support of

regulatory and compliance activities. The position serves as a primary technical interface

between internal teams, external consultants, transmission owners, and market operators.

Key Responsibilities

• Oversee interconnection activities for a portfolio of solar and battery storage projects

across multiple stages of development and construction.

• Coordinate closely with transmission owners, RTOs/ISOs, consultants, and internal

stakeholders regarding applications, studies, modeling assumptions, and technical

requirements.

• Perform and direct power flow, interconnection, and economic analyses to evaluate

site viability, system impacts, and optimal project sizing.

• Analyze transmission constraints, congestion exposure, curtailment risk, and nodal or

basis risk associated with prospective and active projects.

• Support the review, negotiation, and execution of interconnection agreements,

including technical schedules and exhibits.

• Guide the development and review of preliminary interconnection designs, including

single-line diagrams and protection concepts.

• Develop and manage interconnection schedules aligned with overall project

development plans and EPC timelines.

• Monitor the engineering, procurement, and construction of interconnection facilities

executed by utilities or third-party contractors, including leading coordination calls as

needed.

• Track market rule changes, ISO stakeholder processes, and transmission planning

updates, and communicate relevant impacts to project teams and leadership.• Support generator registration activities with utilities, RTOs/ISOs, and applicable

regulatory bodies.

• Assist with compliance efforts related to ISO, NERC, FERC, and other regional

reliability or market requirements.

Qualifications & Experience

• Bachelor’s degree in Electrical Engineering, Power Systems Engineering, Computer

Engineering, or a related discipline.

• Minimum of 5 years of experience in transmission planning, interconnection, power

markets, or related roles within the electric power industry.

• At least 3 years of hands-on experience with power flow, production cost modeling,

or transmission analysis tools such as PowerWorld, PSS®E, PLEXOS, TARA, or

similar platforms.

• Demonstrated project management capability; professional certification (e.g., PMP) is

a plus.

• Proven ability to work independently, manage multiple priorities, and drive complex

workstreams to completion.

• Strong written and verbal communication skills, with the ability to present technical

information clearly to both technical and non-technical audiences.

• Highly organized with strong analytical, problem-solving, and attention-to-detail

skills.

• Experience with interconnection processes in ERCOT and MISO markets is strongly

preferred.

• Prior responsibility for managing interconnection applications and studies is highly

desirable.

• Programming or automation experience, particularly using Python, is a plus.

• Ability to advocate for and protect organizational interests in technical and

commercial discussions.

Job Title: Applications Engineer

Location: Charlotte, NC

Job Type: Direct Hire – Fulltime

Summary

The Applications Engineer will support CNC machining operations through advanced programming, process optimization, and technical application development using Siemens NX. The ideal candidate will have strong hands – on experience with CNC machines and verification

systems such as Vericut, ensuring accuracy, efficiency, and high-quality mold production.

Qualification Requirements

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and ability required. Reasonable accommodation may be provided to enable individuals with disabilities to perform essential functions. The individual will need to work 6:30 am – 4:00pm.

Key Responsibilities

• Develop, modify, and optimize CNC programs using Siemens NX (CAM) for tire mold components including sidewalls, tread rings, segments, plates, and related tooling.

• Support both New Mold machining processes.

• Create and validate CNC toolpaths, machining strategies, and post-processing solutions within NX CAM.

• Customize and configure NX environments, including templates, libraries, and best practices to improve efficiency.

• Troubleshoot design and manufacturing issues related to CAD/CAM workflows and propose effective solutions.

• Utilize Vericut or similar verification software to simulate and validate CNC programs to prevent collisions and reduce machine downtime.

• Collaborate with CNC machinists, programmers, and engineering teams to improve manufacturability and production flow.

• Analyze machining processes to reduce cycle times and improve tool life.

• Provide technical troubleshooting support for machining issues on the shop floor.

• Assist in fixture design, tooling selection, and process standardization.

• Maintain accurate documentation of programs, revisions, and engineering changes.

• Support ERP and planning systems as related to machining workflows.

• Ensure compliance with quality and safety standards (ISO 9001 preferred; ISO 45001 knowledge a plus).

• Stay current with new Siemens NX releases and participate in continuous improvement initiative to enhance design automation, standardization, and manufacturing efficiency.

Required Qualifications

• Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or related field (or equivalent work experience).

• 3–5 years of experience in CNC programming and machining within a manufacturing environment.

• Advanced proficiency in Siemens NX (CAM).

• Strong understanding of multi-axis CNC machines (3-axis, 4-axis, and 5-axis preferred).

• Experience working with tire molds or similar complex tooling.

• Strong understanding of G-code and machining strategies.

• Ability to read and interpret engineering drawings and GD&T.

• Hands-on troubleshooting experience on CNC equipment.

Preferred Qualifications

• Experience using Vericut for CNC program simulation and verification.

• Experience in tire mold manufacturing or precision tooling industry.

• Familiarity with ERP systems and digital manufacturing integration.

• Knowledge of process improvement methodologies.

• Experience supporting ISO-certified manufacturing environments.

Essential Functions

• Develop, test, and maintain NX Open programs, macros, and automation scripts to support tire mold design and engineering workflows.

• Write, modify, and optimize G-code programs for CNC machining of tire molds..

• Automate repetitive design and machining tasks within Siemens NX to improve efficiency and accuracy.

• Troubleshoot and resolve issues with NX automation tools and G-code programs

• Maintain documentation for all software tools, scripts, and machining instructions.

• Ensure all coding and machining processes comply with internal quality standards and ISO 9001/45001 requirements.

• Provide technical support, training, and guidance to team members on the use of automated tools and machining programs.

Physical Demands

• Prolonged periods of sitting at a desk and working on a computer.

Work Environment

• Professional office environment.

• Climate-controlled workspace.

• Prolonged periods of sitting at a desk and working on a computer.

• Regular use of standard office equipment (computer, phone, printer, etc.).

• Standard business hours in an office setting, occasional overtime work based on job complexity and schedule.

• Low to moderate noise levels.

• Minimal exposure to physical hazards.

Our client is seeking a skilled Information Security & Compliance Specialist to design, implement, and maintain IT security frameworks with a focus on ISO 27001 standards. The ideal candidate will bring a depth of experience in compliance, security frameworks, and IT best practices, working closely with Managed Service Providers (MSPs) and internal stakeholders to ensure a robust security posture.

**This is a contract opportunity located in South San Francisco**

Key Responsibilities:

• Develop and implement IT security frameworks in alignment with ISO 27001 information security standards.
• Conduct internal audits of current IT procedures to identify vulnerabilities and recommend enhancements following best practices in security management.
• Collaborate with IT Managed Service Providers (MSPs) to support and execute compliance roadmaps and ensure timely achievement of security goals.
• Establish and enforce user account setup, access policies, and Single Sign-On (SSO) integrations.
• Utilize security tools such as Crowdstrike, JumpCloud, and SSO applications to manage system security, access, and endpoint protection.
• Maintain documentation related to compliance, audits, and security controls.
• Keep up to date with industry trends and regulatory changes impacting information security and compliance.

Qualifications:

• Proven experience implementing IT frameworks that comply with ISO 27001 or similar information security standards.
• Demonstrated expertise in IT compliance, security frameworks, and internal/external audit processes.
• Experience working with MSPs and coordinating third-party IT/security initiatives.
• Hands-on familiarity with Crowdstrike, JumpCloud, SSO implementations, and policy management for user security.
• Strong communication and project management skills.
• Relevant certifications preferred (e.g., ISO 27001 Lead Implementer/Auditor, CISA, CISSP).

Benefits available to contract/temporary professionals, include medical, vision, dental, and life and disability insurance. Hired contract/temporary professionals are also eligible to enroll in our company 401(k) plan. Visit for more information. Robert Half will consider qualified applicants with criminal histories in a manner consistent with the requirements of the San Francisco Fair Chance Ordinance.

Head of Operations and Manufacturing Ripple Medical | California (Hybrid or Remote) | Full-Time

ABOUT RIPPLE MEDICAL

Ripple Medical is a health tech company on a mission to revolutionize hypertension management with our cuffless blood pressure wearable. Once cleared by FDA, our product will enable patients to easily and accurately monitor blood pressure at home, empowering them and their providers with actionable data to improve outcomes. We're a collaborative, mission-driven team of 33 working in a medical device regulatory environment to bring this technology to the millions of patients who can benefit.

POSITION SUMMARY

The Head of Operations and Manufacturing will own the end-to-end operational infrastructure required to bring Ripple's FDA-regulated cuffless blood pressure monitor to market and scale production. This is a hands-on leadership role for someone who thrives building from zero to one in a regulated environment: selecting contract manufacturers, standing up supply chains compliant with FDA 21 CFR Part 820, establishing ISO 13485-certified quality management systems, and preparing for direct-to-patient fulfillment.

As a company preparing for 510(k) submission and commercial launch, this role is critical to ensuring we can reliably manufacture and deliver a high-quality, FDA-cleared medical device at scale. The ideal candidate brings deep experience in medical device manufacturing (particularly wearable or electro-optical devices), understands regulated hardware supply chains and design transfer, and can roll up their sleeves while building the team and processes for long-term growth.

This position reports directly to the CEO with high visibility to the leadership team and Board of Directors.

KEY RESPONSIBILITIES

Manufacturing & Production

• Lead selection and onboarding of contract manufacturing partners with Class II medical device experience, including RFQ, quality audits, contract negotiation, and ongoing management.
• Own design transfer and manufacturing transfer, working with engineering on DFM principles, Device Master Record (DMR) requirements, and production readiness.
• Establish production planning, forecasting, and capacity management for V&V builds, pilot production, and volume manufacturing.
• Drive continuous improvement in yield, quality, and cost while maintaining FDA and ISO compliance.
• Oversee pilot runs and scale-up, including process validation (IQ/OQ/PQ) and manufacturing controls.

Supply Chain & Procurement

• Build and manage the end-to-end supply chain, including component sourcing, supplier qualification, and inventory management per FDA purchasing controls.
• Develop supplier relationships and negotiate terms while ensuring supply continuity, traceability, and risk mitigation.
• Implement inventory planning to balance working capital with service levels, including buffer strategies for Year 1 launch.
• Monitor and mitigate supply chain risks: component shortages, single-source dependencies, geopolitical factors, and logistics disruptions.

Quality & Regulatory Compliance

• Maintain and improve the ISO 13485-certified QMS in partnership with the quality and regulatory team, ensuring FDA 21 CFR Part 820 compliance.
• Support 510(k) submission activities related to manufacturing, including process validation documentation, DMR development, and device history records (DHR).
• Define incoming inspection, in-process controls, and final product testing consistent with the risk management file.
• Manage product certifications for a Class II device, including FDA registration, UDI compliance, and applicable international requirements.
• Lead root cause analysis and CAPA for quality issues, ensuring post-market surveillance compliance.

Fulfillment & Logistics

• Design the direct-to-patient fulfillment strategy, including 3PL selection with FDA-cleared Class II device experience.
• Establish logistics and distribution for nationwide shipping of a regulated device with chain-of-custody and traceability.
• Develop returns, replacement, and warranty processes that balance patient experience, cost, and compliance.

Team & Organizational Development

• Start as an individual contributor who executes hands-on, then build and lead the operations team through 510(k) clearance and commercial launch.
• Establish operational metrics and dashboards for manufacturing, supply chain, and quality performance.
• Partner with finance on cost modeling, COGS optimization, and operational budgeting.
• Collaborate cross-functionally with engineering, software, regulatory, and commercial teams.

QUALIFICATIONS

• 7-12 years in manufacturing, operations, or supply chain, with 3-5+ years in medical devices (Class II preferred), wearables, or regulated hardware.
• Experience managing contract manufacturers for regulated medical devices, preferably in Asia and/or domestically.
• Experience at or with CMs/EMS providers (Flex, Jabil, Celestica, Plexus, Sanmina) in Class II medical device or wearable programs is a strong plus.
• Track record of design transfer and scaling production from pilot to volume for regulated products.
• ISO 13485 and FDA 21 CFR Part 820 experience required.
• Familiarity with the 510(k) process and manufacturing documentation (process validations, DMR/DHR) strongly preferred.
• Bachelor's in Engineering, Supply Chain, Operations, Biomedical Engineering, or related field; MBA or advanced degree a plus.
• Based in California or travel up to 25%.

COMPENSATION

• Base Salary: $160,000 - $210,000 USD
• Performance Bonus: Tied to company milestones and personal objectives
• Equity: Early-stage stock option grant with meaningful ownership
• 100% Employer-Paid Healthcare: Medical, dental, and vision
• Additional Benefits: 401(k) with company match, flexible PTO

Quality Manager

We are seeking an experienced Quality Manager to build, implement, and lead the Quality Assurance function within our fragrance and liquid manufacturing operations. This is a hands-on, individual contributor role responsible for establishing robust quality systems, ensuring GMP compliance, leading ISO certification efforts, and driving continuous improvement across production and laboratory environments.

The ideal candidate has direct experience in fragrance, flavor, cosmetics, or other liquid consumables manufacturing and possesses strong scientific, analytical, and regulatory expertise.

Key Responsibilities

• Design, implement, and maintain the Quality Management System (QMS).
• Develop, revise, and control SOPs, work instructions, batch records, and quality documentation.
• Establish document control, change management, deviation management, and CAPA systems.
• Create scalable systems to support company growth and regulatory compliance.

• Ensure compliance with Good Manufacturing Practices (GMP) applicable to fragrance and liquid production.
• Lead ISO 9001 certification efforts and maintain audit readiness.
• Prepare for and manage internal and external audits.
• Oversee training programs to ensure adherence to quality standards.

• Conduct daily floor audits of compounding, filling, labeling, and packaging operations.
• Monitor raw material inspection, in-process controls, and finished goods release.
• Oversee batch record review and approval.
• Ensure laboratory testing procedures meet established specifications and validation standards.
• Maintain calibration and preventive maintenance programs for quality-critical equipment.
  

• Establish KPIs and quality metrics for production performance and defect reduction.
• Implement statistical tools for trend analysis and process capability evaluation.
• Develop reporting dashboards and executive-level quality summaries.
• Lead root cause analysis using structured methodologies (e.g., 5 Whys, Fishbone, FMEA).
• Drive corrective and preventive actions with measurable outcomes.
  

• Investigate non-conformances, deviations, and customer complaints.
• Identify systemic risks and implement preventative controls.
• Collaborate with Production, R&D, and Supply Chain to resolve quality issues.
• Lead initiatives to reduce waste, improve batch consistency, and strengthen process control.
  

• Prepare and present regular quality performance reports to executive leadership.
• Provide clear analysis of trends, risks, and mitigation strategies.
• Serve as the subject matter expert for all quality-related matters within the organization.

Qualifications

• 5+ years of Quality Assurance experience in fragrance, flavor, cosmetics, or liquid consumables manufacturing.
• Demonstrated experience implementing and managing GMP-compliant systems.
• Direct experience with ISO 9001 certification and audit management.
• Strong understanding of chemical formulation processes, batch manufacturing, and laboratory testing.
• Proficiency in statistical analysis, data collection systems, and quality metrics tracking.
• Experience developing SOPs, quality documentation, and structured CAPA programs.
• Strong technical writing and executive reporting skills.
• Bachelor’s degree in Chemistry, Chemical Engineering, Microbiology, or related scientific discipline preferred.

Preferred Qualifications

• Experience building or restructuring a Quality department.
• Lean, Six Sigma, or other process improvement certification.
• Experience working with ERP or Quality Management Systems (QMS).
• Familiarity with IFRA guidelines and raw material compliance documentation.

Performance Expectations

• Establish a fully structured and documented Quality Management System.
• Achieve and maintain ISO certification readiness.
• Reduce deviations, defects, and customer complaints.
• Improve process consistency and batch reliability.
• Create measurable, data-driven visibility of quality performance for leadership.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

We are seeking a dynamic and motivated leader to take on the role of Radar Digital Product Line (RDPL) DevSecOps (DSO) Pipeline Team Lead in an exciting Scrum agile environment. This position offers the opportunity to lead and inspire a talented team, drive innovation, and make a tangible impact on our Continuous Integration/Continuous Delivery (CI/CD) pipelines and development processes. We are looking for a highly collaborative and driven RDPL DSO Pipeline Lead to work alongside the RDPL software team, program subject matter experts (SMEs), and key partners from the IS103 Digital Technologies (DT) and Cyber teams. In this role, you’ll play a pivotal part in ensuring the efficiency and stability of our development processes. If you're passionate about test automation, creative problem-solving, and streamlining workflows, this is the role for you.

The Department’s mission is to provide world class Radar Software to be used in military systems deployed at sea and on land. Our software teams employ an Agile Scrum process to rapidly design, code, integrate and test capabilities on a continuous basis into a mature solution for our customers.

This position is full-time on-site in Marlborough Massachusetts.

What You Will Do

• Executive Communication: Facilitate clear and effective communication with executives and stakeholders across the business, ensuring alignment of technical strategies with organizational objectives and providing updates on critical initiatives and improvements.

• Operational Planning: Establish and execute comprehensive operational plans for managing and advancing the RDPL Engineering Team. This includes overseeing complex workflows, ensuring stability, and driving innovation across multiple programs and platforms.

• Strategic Implementation:Develop and implement the functional strategy for CI/CD pipelines and the associated development environments, ensuring alignment with organizational goals and priorities.

• Optimize CI/CD Pipelines: Monitor, maintain, and significantly improve the Continuous Integration/Continuous Delivery (CI/CD) pipelines for the common trunk to support seamless delivery. Support and improve our pipelines by delivering innovative solutions and addressing emergent situations (including off-hours) swiftly and effectively.

• Prioritize and Adapt: Manage priorities effectively across multiple programs and platforms in a fast-paced environment.

• Ensure Development Environment Stability: Safeguard the reliability of the development environment and common gate tests, ensuring smooth operations on multiple networks across the largest IS in the Northeast supporting over 15 different programs. 

• Implement Upgrades: Lead updates to the common trunk pipelines in alignment with Software Factory (SWF) & Digital Technology (DT) upgrades, driving innovation and efficiency.

• Lead and Inspire: Manage the RDPL DSO Pipeline team, fostering a collaborative and productive environment that drives excellence and continuous improvement. 

• Solve Complex Problems: Provide practical and effective solutions to challenging technical software issues, ensuring stability and performance.

• Collaborate Across Disciplines/Customers: Work closely with colleagues across Engineering, Digital Technology (DT), Safety, and Cyber to achieve shared goals. Responsible for an ecosystem that operates 24/7 supporting over 1,000 users on the IS. 

• Debug and Integrate: Tackle stability issues in the common trunk, while integrating and testing real-time embedded and application software on Linux and Windows platforms.

• Maintain & Modernize Development Environment: Work with tools like ClearCase, Perl, Jenkins, Smartbear Collaborator, Grafana, Coverity, Matlab and more, while supporting migration to cutting-edge container based development environment that includes Git, GitLab, Podman, VSCode, Artifactory, and Poolside AI.  Communicate and work with vendors/suppliers to maintain and modernize the environment. 

Qualifications You Must Have

• Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 10 years of prior relevant experience.

• Experience with automation and scripting languages such as Bash, Perl, Python, and others. 

• Experience with CI/CD practices, DevSecOps pipelines, containerized development environments (such as Docker, Podman, and Kubernetes), and related organizational methodologies.

• Experience in debugging, testing, and maintaining complex development ecosystems.

• Experience with Configuration Management Tools such as ClearCase, Git, GitLab, and similar platforms.

• Active and transferable U.S. government issued Secret security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance. 

Qualifications We Prefer

• Collaborative Leadership: A detail-oriented leader who excels in team settings, fosters collaboration, and builds strong relationships across all levels of the organization. 

• Quick Decision-Making: A quick thinker who remains calm under pressure and delivers results in high-stakes scenarios. 

• CI/CD Knowledge: Expertise in Continuous Integration/Continuous Delivery (CI/CD) tools, and best practices, including Jenkins, GitLab, and Artifactory. 

• Embedded Software: Experience in real-time embedded software integration and testing. 

• DevSecOps & Test Automation: Proficiency with DevSecOps practices, including admin and user experience with tools like Jenkins, GitLab runners, and Grafana for visualization. 

• Linux Proficiency: Admin and user experience with Linux operating systems. 

• Code Review Tools: Experience with SmartBear Collaborator, GitLab, or other source code review tools. 

• Static Analysis Tools: Admin and user experience with static analysis tools such as Coverity. 

• Development Tools: Familiarity with tools like Git, Jira, Artifactory, BitBucket, and Matlab, with experience in both admin and user capacities. 

• Integration of AI in Development: Understanding the application of AI within the development workflow.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation Eligible – Relocation assistance available.

Learn More & Apply Now

Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Job Overview:

We are seeking two skilled Software Engineers with strong C++ and Linux expertise to join our team in Mossville. The ideal candidate will have 3–5 years of experience in software development, with a strong preference for candidates who have hands-on experience in robotics and ROS (Robot Operating System).

If a candidate has 1+ years of solid ROS/robotics experience, they will also be considered.

Key Responsibilities:

• Develop, implement, and maintain software applications using C++
• Work in a Linux development environment
• Design and develop software components for robotics systems
• Integrate and test applications within ROS frameworks
• Debug, optimize, and enhance system performance
• Collaborate with cross-functional engineering teams

Required Qualifications:

• 3–5 years of professional software development experience
• Strong programming skills in C++
• Hands-on experience working in Linux environments
• Experience with ROS (Robot Operating System)
• Understanding of software architecture and system integration

Preferred Qualifications:

• Background in Robotics (highly preferred)
• Experience working in autonomous systems or machine control environments
• Prior experience with Cat AIS (Asset Intelligence Systems) – a plus
• Experience working with large industrial or heavy equipment systems

Job Title: Embedded Software Engineer

Location: Oak Brook, IL

Duration: Full-Time

Role Overview

Join the team building next-gen tractor display and guidance systems. You’ll help migrate the platform from Android/Java to QT/C++ on Linux and develop new features across UI, middleware, and control systems.

Responsibilities

• Work with Senior Engineers to establish goals for week
• Design display and guidance systems in C++
• Interface with Systems Engineers on refinement of requirements and solutions
• Will be designing new feature sets for the platform.
• Help with Linux Device development
• If candidate has QT, will help with architecture
• Will perform unit-tests on code for bugs
• Utilize networking for communication with the vehicle (CAN, LIN, etc)
• Each day will be 60-80% development
• some example things they will work on are:
• c++ conversion from Java

1. customer facing code down to register
2. clock cycles
3. data on communication bus and transmission to tractor
4. stability related to data latency issues

Requirements

• BS in EE/CE or related field
• 4+ years embedded development experience
• Strong C++, OOP, multithreading
• Hardware/systems exposure (not web-only)
• Experience with communication protocols

Plus

• QT, Linux, Java, SQL/Postgres, GIT
• Automotive or embedded industry background