Arch Linux Iso Install Jobs in Usa

An Electrical Assembly Lead is responsible for assembling, installing, and maintaining electrical systems and components. They work with various types of wiring, cables, and connectors to ensure proper functioning of electrical equipment and systems. An Electrical Assembly Lead may read and interpret electrical schematics and blueprints, and they often work closely with electricians and other technicians to complete projects. They must adhere to safety regulations and follow industry standards to ensure the integrity and reliability of electrical systems.

Essential Job Duties:

• Train employees; assist in new employee training plans
• Communicate and delegate daily priorities to other employees
• Release jobs to QA
• Write purchase requisitions; order parts of GEXPRO
• Lead/Mentor 6S and continuous improvement projects, including Kaizen events
• Lead Quality Initiatives
• Communicate within department and with other departments to resolve issues and drive timely completion of jobs
• Review bill of materials and drawings for issues
• Assist in interviews and new hire selection
• Identify training needs for the group and help develop appropriate training plan
• Assist in tracking job efficiency and productivity
• Assist in employee evaluation process
• Communicate passdown information
• Lead Safety and Quality meetings
• Support the enforcement of Powell's policies and safety program

Minimum Qualifications

• Minimum education level of a High School Diploma or General Education Equivalent Diploma is preferred.
• 8 years of experience in a manufacturing environment
• Knowledge of system software (i.e. Oracle, MES, True View) to look up parts and drawings.
• Lift up to 50lbs using proper lifting techniques.

Preferred Qualifications

• Skills, Abilities & Other Requirements
• Knowledge and understanding of Engineering Change orders
• Read and understand spec sheets and follow proper use of hardware by spec requirements.
• Advanced knowledge of single and three-line drawings, including symbols
• Ability to identify part discrepancies and properly write HFDs for corrections
• Knowledge of mechanical drawings and designs
• Ability to complete complex engineering changes.
• Effectively demonstrates on-time delivery and the ability to stay focused on goals and responsibilities.
• Self-starter with ability to take on multiple tasks with a drive to succeed.
• Challenges the status quo; looks for better or more efficient ways to get results.
• Ability to adapt to new ideas, technology, processes or product changes.
• Believes and displays through actions that our customers represent our current success and remain vital to our future growth.
• Demonstrates integrity and ethical decision making.
• Conscientious, thorough, accurate, and reliable when performing and completing job tasks.
• Able to work effectively within your team and around other departments and their activities.
• Ability to learn and adhere to all manufacturing policies and practices to ensure adherence to ISO requirements.

Grays Specialty Equipment segment offers a comprehensive range of expert services to design, manufacture, integrate, install, and maintain some of the most advanced systems on the market. The Specialty Equipment segment includes Anderson Dahlen, located in Ramsey, MN, and Waconia, MN. Anderson Dahlen delivers end-to-end equipment design-build and contract manufacturing, with precision fabrication cutting, forming, machining, welding, finishing, and complex assemblies backed by engineering, integration, and complete process solutions including skids and sanitary platforms tailored to customer applications. Anderson Dahlen is ISO 9001:2015 certified, as well as ASME, AWS, and PED compliant.

The wage range for this role takes into account a wide range of factors that are considered in making compensation decisions, including but not limited to skill sets, experience and training, certifications, as well as other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. It is not typical for an individual to be hired at or near the top of the range for their role, and compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the current range is $22-$35/hour.

Our comprehensive health plan options, including medical, dental, and vision insurance, provide our team members with the tools they need for treatment, preventative care, exams, and prescriptions. ADIs life, disability, and supplemental insurance options provide peace of mind and support to rely on in challenging times. Our team members overseas are offered private health insurance, life insurance, and an employee assistance program (EAP).

PRIMARY OBJECTIVE/QUALIFICATIONS OF THE POSITION:

• Performs a full range of rough grinding, polishing, and metal finishing operations on components, manufactured parts, and assemblies in accordance with prescribed specifications, quality standards, and safety requirements.
• Follow all safe work practices and OSHA requirements.
• Grind, file, sand, polish, and blend metal surfaces using hand tools, power tools, and finishing techniques.
• Examine and feel metal surfaces to detect defects such as dents, scratches, or material imperfections.
• Set up and operate straight-line sanders, buffers, Timesavers, and hand-held grinders and polishers.
• Select proper abrasives and finishing methods to achieve specified finishes efficiently and consistently.
• Read, understand, and apply blueprints, customer requirements, and written or verbal work instructions.
• Complete projects within established timeframes while meeting or exceeding quality standards.
• Monitor and maintain quality of finished goods throughout the process.
• Use profilometers and other measuring tools to verify surface finish requirements.
• Stage work and operate equipment independently as skill level allows.
• Develop, improve, and standardize finishing processes and techniques while maintaining high quality standards.
• Contribute to continuous improvement, cost-saving initiatives, and quality enhancements.
• Train, mentor, and support other finishers as experience level allows.
• Work effectively in a team environment and maintain positive working relationships.
• Understand and follow all company policies and procedures.
• Perform other duties as assigned.

PHYSICAL REQUIREMENTS:

The company fosters a manufacturing-type environment. Moderately heavy work requires the occasional lifting of objects weighing 50 pounds or less. In the performance of essential duties, the incumbent may be required to operate a variety of industrial machining tools.

• Lift/Carry-
• 0-10 lbs. continuously.
• 11-50 lbs. frequently
• 51-100 lbs. never
• Push/Pull-
• 0-25 lbs. continuously
• 26-100 lbs. frequently
• Bend- 34-66% during a 10-hour shift.
• Twist/Turn- 34-66% during a 10-hour shift.
• Kneel/Squat- 0-33% during a 10-hour shift.
• Sit- 0-33% during a 10-hour shift.
• Stand/Walk- 0-33% during a 10-hour shift.
• Overhead Reaching- 0-33% during a 10-hour shift.
• Ladder/Stair Climb- 0-33% during a 10-hour shift.

EEO DISCLAIMER:

Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

Compensation details: 22-35 Hourly Wage

PIc6c41658b437-26289-39837399

Performs a variety of tasks involved in the assembly of electronic components, subassemblies, products, or systems. Will often work independently or under minimal supervision. Perform duties in accordance with Manufacturing Department/ISO 9001 written procedures. The employee will be willing to work overtime when it is needed.

Essential Duties and Responsibilities include the following and additional duties may be assigned as needed:

• Follow written and verbal work instructions
• Follow production drawings and understanding of Bill of Materials
• Position and align parts and install boards on chassis or panels
• Assemble and attach hardware, such as caps, clamps, knobs, and switches to assemblies
• Use power and hand-held tools
• Keep the Manufacturing area clean of dust and debris. May assist with material handling function. May assist with Board Assembly/Machine Operator, Test, Stockroom and Shipping functions as needed. May set up and prepare workstations.

Education and/or Experience

High School Diploma or equivalent required. One-year experience electromechanical assembly of PC boards within, cabinets, panels, and enclosures. The following skills are required. Ability to identify electronic and mechanical components (i.e.: resistor color codes and mechanical hardware, etc.) Ability to interpret assembly blueprints and drawings Ability to read and interpret assembly process documentation. Precision soldering to the IPC-A-610C may be required.

Equipment/Tools

Various assembly equipment and hand tools such as screwdrivers, wrenches, and light power tools.

Hubbell Incorporated creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently.

The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses.

We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe.

Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class.

The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

Job Segment: Electronics, Telecom, Telecommunications, Assembly, Technology, Manufacturing

Grays Specialty Equipment segment offers a comprehensive range of expert services to design, manufacture, integrate, install, and maintain some of the most advanced systems on the market. The Specialty Equipment segment includes Anderson Dahlen, located in Ramsey, MN, and Waconia, MN. Anderson Dahlen delivers end-to-end equipment design-build and contract manufacturing, with precision fabrication cutting, forming, machining, welding, finishing, and complex assemblies backed by engineering, integration, and complete process solutions including skids and sanitary platforms tailored to customer applications. Anderson Dahlen is ISO 9001:2015 certified, as well as ASME, AWS, and PED compliant.

The wage range for this role takes into account a wide range of factors that are considered in making compensation decisions, including but not limited to skill sets, experience and training, certifications, as well as other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. It is not typical for an individual to be hired at or near the top of the range for their role, and compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the current range is $22-$27/hour.

Our comprehensive health plan options, including medical, dental, and vision insurance, provide our team members with the tools they need for treatment, preventative care, exams, and prescriptions. ADIs life, disability, and supplemental insurance options provide peace of mind and support to rely on in challenging times. Our team members overseas are offered private health insurance, life insurance, and an employee assistance program (EAP).

PRIMARY OBJECTIVE OF THE POSITION:

Responsible for assisting with the production process in the machining department. Inventory and stocking of the tool crib. Breaking down and setting up tooling for the machining centers. Moves carts and dollies with items on them. Assists in cleanup.

MAJOR AREAS OF ACCOUNTABILITY:

• Create and maintain tooling lists for actively used machine programs.
• Set up necessary tooling for machinists prior to machining operations.
• Tear down, inspect, and place used tooling in the appropriate locations.
• Stock good quality tooling back into the replenishment system.
• Perform inventory checks on replenishable tooling on a routine basis.
• Maintain a clean, organized, and functional tool room and storage system in accordance with proper 5S practices.
• Implement and maintain 5S projects in the tool room and machine shop.
• Work with programmers and Shift Supervisor to troubleshoot tooling issues and provide technical support to machinists as needed.
• Work with programmers and tool room coordinator to test potential tooling upgrades and new technology.
• Observe safe work practices.
• Good organizational skills and attention to detail.
• Good housekeeping practices.
• Knowledge of, or the desire to learn the machine shop environment and tooling needs.
• Basic experience with Microsoft Xcel, Word, and Outlook
• Other duties as assigned.

QUALIFICATIONS FOR ENTRY:

• High school education or equivalent.
• Technical Degree in machining preferred, currently enrolled in machining courses is acceptable.
• A minimum of 1-2 years of prior experience working in a machine shop tool room and/or good working knowledge of CNC machining and tooling highly preferred.

PHYSICAL REQUIREMENTS:

The company fosters a manufacturing-type environment. The physical demands described below are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• Lift/Carry-
• 0-10 lbs. continuously.
• 11-50 lbs. frequently
• 51-100 lbs. never
• Push/Pull-
• 0-25 lbs. continuously
• 26-100 lbs. frequently
• Bend- 34-66% during a 10/12-hour shift
• Twist/Turn- 34-66% during a 10/12-hour shift
• Kneel/Squat- 0-33% during a 10/12-hour shift
• Sit- 0-33% during a 10/12-hour shift.
• Stand/Walk- 67-100% during a 10/12-hour shift
• Overhead Reaching- 0-33% during a 10/12-hour shift
• Ladder/Stair- 0-33% during a 10/12-hour shift

EEO DISCLAIMER:

Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

Compensation details: 25-35 Hourly Wage

PIece14e66615d-26289-39867966

Location: Tarzana, CA

Duration: 90 days

Start Date: Apr 12, 2026

End Date: Jul 12, 2026

Contract Type: W2 through staffing supplier, Full-Time (40 hrs/week)

Pay: $25.20 per hour

Visa Sponsorship: Not provided

Interview Process:

30 minutes via MS Teams

At AstraZeneca's Oncology R&D division, we follow the science to explore and innovate. We are working towards treating, preventing, modifying, and even curing some of the world's most complex diseases. Here we have the potential to grow our pipeline and positively impact the lives of billions of patients around the world. We are committed to making a difference and have built our business around our passion for science. Now we are fusing data and technology with the latest scientific innovations to achieve the next wave of breakthroughs.

Position Summary:

We are seeking a Contractor to support our dynamic Manufacturing team in the production of TCR-T, CAR-T, and allogeneic cell therapy investigational products. This contract role is based in Tarzana, CA, with occasional travel to Santa Monica, CA as needed. The contractor will report to the Associate Director of Manufacturing, NGF70.

This role will ensure successful manufacture and release of cell therapy products by following established processes in full compliance with cGMP. This role also supports manufacturing operational readiness and the successful technology transfer of pipeline products using knowledge of cGMP regulations.

This is a 90 day contingent assignment, with the possibility of extension based on project needs, performance, and budget availability.

Compensation and employment terms will be managed through an approved staffing partner. This role is not eligible for company-sponsored benefits unless provided by the staffing agency.

Responsibilities:

• Using general application of principles, support activities to ensure GMP readiness for clinical manufacturing, including but not limited to equipment procurement, installation and qualification, facility qualification, and technology transfer.

• Perform operational tasks within a cleanroom environment in a manner consistent with safety policies, quality systems, and cGMP requirements.

• Assist in developing Standard Operating Procedures (SOPs) and other documents for manufacturing processes.

• Set up manufacturing areas and equipment, including complex automated cell processing equipment.

• Follow all cleaning and gowning procedures for the facility.

• Maintain appropriate inventories of material and supplies within the cleanroom areas to support manufacturing activities.

• Ensure all materials and equipment are identified and available in time for manufacturing activities.

• Support Process Development (PD) and Manufacturing Sciences & Technology (MSAT) to align manufacturing plans with product development plans.

• Ensure that all production operations are controlled and performed within cGMP regulatory guidelines.

• Provide verbal and written updates to Manufacturing leadership.

• Perform other responsibilities and project-based assignments as needed to support manufacturing operations.

Experience and Education:

• Minimum of five (5) years of experience with a High School Diploma or a BS/BA in a relevant science or engineering discipline.

• Understanding of cGMP process and knowledge of CMC regulatory framework for biologics.

• Knowledge of aseptic techniques for primary human cell cultures and GMP manufacturing and supporting tech transfer and GMP clinical/commercial manufacturing operations.

Additional Requirements:

• Knowledge of industry practices, cell therapy manufacturing experience preferred.

• Develop solutions to complex problems independently.

• Refer to established precedents and policies or use original thinking.

• Help determine goals of assignment.

• Plan schedules and arranges own activities.

• Work is reviewed upon completion for adequacy in meeting goals.

-CAR-T immunotherapy production operator/verifier/runner

-Deviation support

-Experience with operating cell therapy equipment such as NC-200 Nucleocounter Automated Cell Counter, Dynasellect, Cue, Welder, Sealer, Microscope, Sefia, Finia, Sepax, and ISO 5 aseptic operations

When we put unexpected teams in the same room, we fuel bold thinking with the power to inspire life-changing medicines. In-person working gives us the platform we need to connect, work at pace and challenge perceptions. That's why we work, on average, a minimum of three days per week from the office. But that doesn't mean we're not flexible. We balance the expectation of being in the office while respecting individual flexibility. Join us in our unique and ambitious world.

Company Overview:

Process Alliance is a leading engineering consultancy firm dedicated to delivering innovative solutions in engineering, automation, manufacturing services, and medical devices. With a commitment to being a better model of problem solving, we have been at the forefront of providing cutting-edge engineering services to clients across the life science industry. Our team of experts thrives on solving complex challenges and driving technological advancements to meet the evolving needs of our clients.

Overview

We are seeking an HVAC Engineer to support the design, operation, and optimization of HVAC and cleanroom environmental systems within a pharmaceutical manufacturing facility. This role focuses on maintaining GMP-compliant environmental conditions, supporting facility projects, and ensuring reliable operation of critical HVAC infrastructure used in regulated production areas.

The ideal candidate will have experience with cleanroom HVAC systems, environmental monitoring, and regulatory standards such as FDA and GMP guidelines.

Key Responsibilities

• Design, review, and support modifications to HVAC systems serving GMP manufacturing and laboratory environments
• Ensure HVAC systems maintain required temperature, humidity, pressure differentials, and air change rates in classified cleanroom areas
• Develop and review P&IDs, airflow diagrams, and system specifications
• Support commissioning, qualification, and validation (CQV) activities for HVAC and environmental control systems (IQ/OQ/PQ)
• Troubleshoot HVAC performance issues impacting manufacturing or laboratory operations
• Collaborate with facilities, engineering, QA, and validation teams to ensure systems meet regulatory and operational requirements
• Participate in deviation investigations and CAPA activities related to environmental control systems
• Manage or support capital projects and system upgrades involving air handling units (AHUs), chillers, ductwork, and cleanroom infrastructure
• Ensure compliance with GMP, FDA, and industry standards such as ISO cleanroom classifications
• Work with external contractors, engineering firms, and equipment vendors on HVAC design and installation

Qualifications

• Bachelor’s degree in Mechanical Engineering, Chemical Engineering, or related field
• 3+ years of experience with HVAC systems in pharmaceutical, biotech, or regulated manufacturing environments
• Knowledge of cleanroom HVAC design principles (airflow, pressure cascades, HEPA filtration)
• Experience with GMP regulations and FDA compliance
• Familiarity with HVAC equipment such as AHUs, chillers, boilers, VAV systems, and BMS controls
• Ability to read and interpret P&IDs, engineering drawings, and system specifications

About Our Culture:

At Process Alliance, we strive to be a better model for how problems are solved, and solutions are delivered. We believe in providing a supportive and inclusive work environment where employees can thrive both personally and professionally. Join our team and be part of a company that is shaping the future of engineering solutions.

Learn more about us:

Visit our website at to explore our projects, expertise, and the impact we make in the engineering and consultancy space.

Process Alliance is an equal opportunity employer. We encourage applications from candidates of all backgrounds and experiences

Thermal Care, part of the PiovanGroup, is a leading manufacturer of process cooling equipment and systems for applications worldwide. As an ISO 9001 certified manufacturer, Thermal Care provides heat transfer equipment for over 50 industries and specializes in meeting the specific needs of our customers by offering both standard and custom designed industrial process cooling solutions. Some of the industries served include plastics, laser, heat treating, food processing, machine tool, plating, anodizing, chemical, die casting, optical coating, and printing.

The Technical Support Specialist (HVAC) actively resolves the day-to-day technical needs of customers by managing problems and solutions. This position will report to the Director of Service and Aftermarket and is located in Niles, Illinois.

Duties and Responsibilities

• Respond to external and internal customers (primarily via phone)
• Understand customer concerns and resolve problematic issues in a professional manner
• Provide after-hours phone support
• Communicate with customers, engineering, sales, and service management
• Troubleshoot and provide suggestions to resolve electrical, mechanical, technical, or industry related issues
• Document events for future reference and create corrective action reports (CARs) as needed

Requirements

• Associate’s degree and/or five (5)+ years of direct work experience without formal education
• Minimum of three (3) years of process cooling experience preferred
• Knowledge of basic PLC ladder logic, AutoCAD drawings, system level controls, refrigerant equipment, pumps, tanks, and piping
• Ability to read and comprehend schematics, wiring diagrams, ladder logic, etc.
• Prior experience in customer service (either face-to-face or over the phone)
• Excellent verbal and written communication skills
• Must have strong interpersonal skills and provide high-quality customer service

PiovanGroup is a world leader in the development and production of systems for the automation of production processes for the storage, transport and treatment of polymers, plastic, and food powders. The Group is close to its customers, on a global basis, through continuous technical assistance and support from the design phase to the installation and start-up of the system.

Customers, People, Innovation. These are the pillars of our philosophy that have led us to grow in a path that began more than fifty years ago, pursuing our development objectives with honesty, integrity, and transparency.

PiovanGroup offers an outstanding compensation and benefits package including profit sharing, bonus plans, 401(k) with company match, medical insurance, dental, vision, life insurance, short- and long-term disability, health club reimbursement, tuition reimbursement, employee assistance, and employee referral bonus program.

PiovanGroup is an Equal Opportunity Employer (EOE) and offers employment opportunities to all qualified persons regardless of race, color, religion, sex, age, national origin or ancestry, physical or mental disability (except where physical or mental abilities are a bona fide occupational requirement), veteran status, marital status, familial status, sexual orientation, HIV-positive status, possession of the sickle cell trait, genetic characteristics, political views, and any other basis protected by federal, state or local laws.

Title: Electronic Specialist (Tech)

Location: Carson City, NV 89706

Duration: Direct hire

Pay rate: USD 35.00 /hr - USD 45.00 /hr

Qualifications:

1ST SHIFT POSITION 6 AM TO 3:30 PM

EDUCATION AND WORK EXPERIENCE: The specific EDUCATION and/or EXPERIENCE requirements of this position are:

High School Diploma or GED preferred

Electronics background

Mechanical engineering (knowledge of)

Machinist background (tool and die work)

The specific LICENSES and/or CERTIFICATIONS required for this position are:

Must pass related job test

Electronics school or equivalent

Laser school

Process instrumentation school

The specific SKILLS and KNOWLEDGE required for this position are:

Able to read and write in English

Basic math skills

Computer literate

Logical thinking

Good hand dexterity

Ability to speak and listen effectively to follow instructions in English. Ability to write and speak complete sentences and understand verbal and written instructions in English

Responsibilities:

PRIMARY DUTIES AND RESPONSIBILITIES:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.

The requirements listed below are representative of the knowledge, skill, and/or ability required.

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

The duties and responsibilities regularly performed for this position are:

Electronic trouble shooting

temperature control, CNC control, P.L.C.

Installation and testing control systems as above

#1. Troubleshoot laser systems.

Order parts to manufactures specifications.

Optical.

Ensures compliance with Company Repair Station Manuel (RSM)/Quality Control Management (QCM).

Must be aware of ISO/Total Customer Satisfaction (TCS) quality requirements.

Ensure that all department employees are properly cross trained.

Adhere to all Company health, safety and environmental policies while performing job duties.

Adhere to and promote Corporate Code of Ethical Standards.

Regular and reliable attendance.

The marginal duties and responsibilities (performed occasionally or at irregular intervals) for this position are:

CNC mechanical repair and setup.

Machine work (mills, lathes, grinders) EDM P/S furnaces.

Control automatic P.L.C logic.

Performing other tasks in the facility as needed.

Job Description

The Quality Engineer provides hands‑on quality oversight across all phases of data center construction. This role ensures that all work is performed in accordance with design intent, specifications, industry standards, and client expectations. The Quality Engineer maintains rigorous documentation, drives continuous improvement, and collaborates closely with construction managers, engineers, and subcontractors to deliver a world‑class facility.

Core Responsibilities

• Maintain, organize, and control technical documentation, submittals, and quality records.
• Research specifications and verify that field‑installed work aligns with design and engineering requirements.
• Track quality KPIs, analyze trends, and recommend improvement actions to project leadership.
• Ensure full compliance with client quality standards, reporting requirements, and audit procedures.
• Review, evaluate, and validate TSQMP (Trade-Specific Quality Management Plan) deliverables across all trades.
• Conduct ACC (Autodesk Construction Cloud) platform audits to ensure accurate and complete documentation.
• Lead nonconformance investigations, root‑cause analyses, and corrective action tracking through closure.
• Partner with construction managers, engineers, safety teams, and subcontractors to resolve quality issues quickly and effectively.
• Support development and reinforcement of quality culture across project teams.

Required Skills & Experience

• 3–7 years of experience in quality engineering, construction quality control, or related roles—preferably within data center, mission‑critical, or large‑scale industrial construction.
• Strong knowledge of construction practices, engineering drawings, technical specifications, and QA/QC processes.
• Experience with ACC (Autodesk Construction Cloud) or similar construction documentation systems.
• Demonstrated ability to lead root‑cause analysis, manage nonconformance reports, and implement corrective/preventive actions.
• Excellent organizational and documentation skills with strong attention to detail.
• Ability to interpret engineering and architectural drawings, specifications, and scopes of work.
• Strong communication and collaboration skills, capable of working cross‑functionally with field teams, engineers, clients, and subcontractors.
• Proficiency in Microsoft Office Suite; experience with data tracking, dashboards, and quality KPI reporting.
• Ability to identify trends, propose improvements, and support continuous improvement initiatives.
• Familiarity with industry quality frameworks (ISO, LEAN, FMEA, etc.) is a plus.
• Ability to work on active construction sites and maintain strong safety awareness.

• Lead and implement the company’s HSE strategy across renewable energy projects in Ireland and Europe
• Ensure compliance with Irish and European health and safety legislation including Construction Regulations, PUWER, LOLER and associated directives
• Manage and maintain HSE management systems including ISO 45001 and ISO 14001 across all project locations
• Carry out internal and external HSE audits and ensure corrective actions are implemented effectively
• Provide guidance to project teams on RAMS, risk assessments, permit to work systems and safe work planning
• Drive a positive safety culture across project teams and subcontractors with a focus on behavioural safety
• Develop and maintain HSE performance reporting and KPIs across multiple European projects
• Lead incident investigations, root cause analysis and continuous improvement initiatives
• Deliver training and mentoring for site managers, engineers and supervisors on key safety topics
• Liaise with regulatory authorities, certification bodies and project stakeholders during inspections and audits
• Support environmental and sustainability initiatives including waste management and environmental risk controls
• Produce monthly and quarterly safety performance reports for senior management and project stakeholders

• Chartered IOSH member CMIOSH or equivalent qualification such as NEBOSH Diploma or MSc in Occupational Health and Safety
• 8 to 10 years experience in health and safety within construction, utilities, power generation or renewable energy projects
• Strong background working on wind farms, solar farms, battery storage or grid infrastructure projects is highly desirable
• Experience managing health and safety across multiple sites and jurisdictions within the EU
• Proven experience implementing and managing ISO 45001 safety management systems
• Excellent knowledge of Irish and European health and safety legislation and compliance requirements
• Strong leadership and communication skills with the ability to influence teams at all levels
• Experience leading audits, incident investigations and safety improvement programmes
• Comfortable working across multiple sites with regular travel across Ireland and Europe
• Practical, solutions focused approach to risk management and safety leadership