Arch Linux Install Guide Jobs in Usa
4,398 positions found — Page 16
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington.
As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies.
Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.
Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers.
Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.
Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications.
Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations.
Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments.
Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications.
Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications.
Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.
Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors.
Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required.
Use precision measuring instruments to verify that quality standards are achieved.
Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures.
Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration.
Basic Qualifications (Required Skills/Experience):
1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.
1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.
1+ years of experience using high impact vibratory tools; such as bucking/riveting.
Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.
Ability to lift up to 35lbs.
Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.
Proficiency in reading, writing, and speaking English.
Preferred Qualifications:
1+ years of experience performing aircraft structural work or equivalate.
Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
This position offers relocation based on candidate eligibility.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift:
This position is for a variety of shifts.
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Apr. 10, 2026
Language Requirements
English Preferred
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
The ideal candidate will have 7–10+ years of hands-on experience working in heavy mechanical environments and must be confident in precision alignments, equipment leveling, and reading technical drawings.
Responsibilities Install and align large reciprocating compressors and industrial engines/motors (CAT, Ariel, Waukesha, etc.) Perform precision coupling alignments using tools such as OPTALIGN and FIXTURLASER XA Pro Conduct flatness testing on compressor frames and mounting surfaces Perform mechanical checks and adjustments, including: Rod run-outs Crosshead and piston clearance checks Soft foot/pull-down checks Piston end clearance adjustments Install and align compressor sheaves and belts Heat and install coupling hubs to specification Install and level compressor cylinders and distance piece supports per manufacturer specs Interpret and apply information from mechanical drawings, OEM installation manuals, balance sheets, and lubricator block diagrams Follow project schedules and work under time-sensitive conditions while maintaining high quality and safety standards Required Skills 10+ years’ experience in compressor/engine installation and heavy mechanical assembly In-depth knowledge of reciprocating gas compressors and rotating equipment Expert in using precision measurement tools (micrometers, dial indicators, laser alignment systems) Strong ability to read and interpret technical drawings and OEM installation documents Experience performing equipment leveling, alignments, and fit-ups according to manufacturer tolerances Field experience with oil & gas compression packages or industrial compressor skids Familiarity with startup/commissioning support and troubleshooting Knowledge of gas compressor operation, packaging, and mechanical systems Self-motivated, professional, and able to work effectively under pressure Additional Information Schedule: 1st Shift: Monday – Friday | 6:00 AM – 4:45 PM Weekend Work: Saturday & Sunday as needed (every other Sunday off) | 5:00 AM – 1:00 PM Schedule may vary depending on project deadlines OR 2nd Shift with a $3/Hr.
shift differential
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries regarding the following opportunity, please contact our Talent Specialist, Marshelin at (224) 507-1280 Title: Mechanical Engineer (Manufacturing / Equipment) Duration: 12 Months Location: On-site in Newton, NC Travel Requirements: Expected to be on-site in the plant during the week Travel to a supplier or vendor may be required for equipment check-out before shipment Work Schedule: Typical 40 hours per week.
May require working weekends/holidays or longer days to support installation schedule Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description Comments: 1) Candidates local to the NC region are preferred but Client is willing to consider candidates outside the local region who are willing to relocate at their own expense.
2) Candidates must be eligible to work in the US for at least 18 months.
Top skills: Experience with high-speed cable manufacturing equipment is a plus but not required (jacketing, ribbon stranding, buffering) Experience with mechanical equipment design, install, start-up and debug in a high-volume manufacturing environment.
Candidate must have 5 years demonstrated leadership experience with coordinating scheduling, workflows, etc..
Managing mechanical and electrical trades (both internal and external) executing equipment install and debug.
Skilled with use of design software (AutoCAD, Solidworks, Inventor) Scope of Position: A mechanical engineer responsible for leading and providing hands-on mechanical support for the installation, start-up and debug of high-cable manufacturing process equipment.
This includes working with a multi-functional team (mechanical, electrical, controls, facilities, IT, operations, etc.) Involves the application of mechanical principles encompassed in mechanics, hydraulics, thermodynamics, metallurgy, and machine design used for the design, production, operation, and use machinery of all types.
Requirements: Experience with high-speed cable manufacturing equipment is a plus but not required (jacketing, ribbon stranding, buffering) Experience with mechanical equipment design, install, start-up and debug in a high-volume manufacturing environment Managing mechanical and electrical trades executing equipment install and debug.
Skilled with use of design software (AutoCAD, SolidWorks, or Inventor) Knowledge of machine guarding and safety practices and standards (OSHA, ANSI, ASME, etc) OSHA 30 Certification desired Good written and oral communication skills Ability to collaborate and work with diverse teams (skills, gender, culture, race, etc.) Capable of multitasking Ability to work with minimal direction Independently determines and develops approaches to solutions Familiarity with other engineering disciplines (electrical, civil, process, etc.) Key Responsibilities Coordinating the task and workplan for team members to meet customer schedule Providing hands on input and insight into equipment installation and troubleshooting Support start-up and qualification of equipment Verifying equipment build and layout against drawings Coordinating installation plan with safety and plant receivers Conferring with Client engineers and vendors to resolve equipment install or build discrepancies Ensure safe work practices Updating drawings and equipment documentation Education: BS in Mechanical Engineering, Mechatronics, Mechanical Technology Minimum Experience: 5 Years Interview process: Initial teams meeting with manager, then onsite interview if local.
If not local, interview will be by teams.
Local candidates are strongly preferred.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
Manufacturing, Solidworks, Inventor, AutoCad, multitasking
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.
As an Assembler Installer, you will play a vital role in our commitment to excellence in aviation by ensuring the safety and quality of our aircraft.
Your expertise will be essential as you meticulously verify parts and fasteners against stringent specifications, set up assembly tools, and align components based on engineering drawings and installation plans.
In this dynamic environment, you will engage in the installation and rework of various interior parts and assemblies, enhancing both functionality and aesthetics.
Your dedication to quality will shine through as you conduct thorough inspections of your work, ensuring compliance with our high standards and promptly addressing any discrepancies.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation Position Responsibilities Review job assignments using bar charts, SOI, IP, and consult with leads to obtain necessary drawings.
Locate work areas using drawings and electronic resources that specify airplane and section numbers.
Verify kitted parts against installation plans and bill of materials for accuracy and suitability.
Determine and obtain the correct fasteners from PCA/MMO control per specifications.
Set up assembly tools according to tooling instructions, ensuring locators are correct for the model.
Align and secure parts on the airplane using tooling holes and clamps, checking for proper margins.
Install and rework interior parts and assemblies, including carpets, stowbins, and seats.
Select and use appropriate drill bits, reamers, and countersinking tools for pilot and full-size holes.
Drill, ream, and countersink holes in parts/assemblies per specifications and instructions.
Disassemble parts, deburr holes, and prepare surfaces for fastener installation.
Apply sealants, primers, adhesives, and corrosion-inhibiting compounds as required by specifications.
Install fasteners in the correct sequence using appropriate tools, adhering to specifications.
Mark and symbolize work for subsequent riveting and install cables and wire bundles as needed.
Inspect completed work for defects, ensuring compliance with engineering drawings and report any job handicaps.
Move kits, carts, and equipment within the work cell to facilitate workflow and maintain personal and tool certifications.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications 1 years of experience in manufacturing, automotive, construction, aerospace or similar industry; this can include education and Military.
1 years of experience following oral and written instructions in the form of blueprints, drawings, work instructions.
1 years of experience using hand and power tools Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel.
Ability to wear hearing protection (ear inserts, canal caps, earmuffs); eye protection.
Ability to use hazardous chemicals.
Preferred Qualifications: 1 years of experience installing aerospace components, construction or automotive assemblies with precision measurement tools, hand and power tools.
Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.
Typical Education & Experience: High school graduate or GED preferred.
Relocation: Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement : This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Pay : $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Apr.
15, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Title: Field Superintendent New Installations
Location: Charlotte, NC, United States
Job ID: 87246
We Elevate... Quality of urban life
Our elevators, escalators, and moving walks safely transport more than two billion of us up and down buildings and across transportation hubs every day. As part of the Schindler team, you’ll discover meaningful work that enhances quality of life for communities, and contribute to making places more accessible, inclusive, and sustainable for all. By joining us, you don’t just become part of our success story; you help shape the future and continue our rich legacy that started back in 1874.
Join us as a Field Superintendent New Installations
Your main responsibilities
PRIMARY FUNCTION / POSITION OVERVIEW:
Field Supt is responsible of the repair of all assigned units so as to conform to customer and Company requirements as related to quality improvement, safety, cost improvement and customer satisfaction in support of Region objectives. Is also responsible for employee selection, training and safety for all assigned projects.
ESSENTIAL FUNCTIONS:
The qualified candidate must be a high-energy self-starter with a strong work ethic. This individual will need to be motivated by a competitive industry and be results, detail and team-oriented. As a Schindler NI Field Superintendent, the candidate’s role will include providing technical solutions, ensuring workplace safety, supervising technicians and job site activity, and supporting new installation and modernization sales. The selected candidate must be an expert at fulfilling customer requirements and maximizing profitability; excellent communication, financial acumen, business development, and management skills will all be critical to success in this role. The NI Field Superintendent must also have the necessary skills and experience to handle customer concerns, adjust manpower levels according to business needs, and to teach employees the Company’s quality, productivity and safety methodology.
Additional responsibilities include:
• Build a team environment by leading field technicians
• Manage training and development of field technicians on established processes, safety, tools and standards through daily communication and job-site visitation.
• Foster excellent communication among team members while maintaining good working relationships with the local union
• Ensure that each installation project meets Company quality and safety standards, as well as all contract requirements.
• Monitor project installation progress completion and drive installation efficiency through daily job-site visitation for progress reporting.
• Perform project installation surveys which includes walking multiple flights of stairs for accessing motor rooms, pits and shaftways.
• Perform daily job-site readiness walkthroughs with general contractors prior to delivery of equipment and project installation commencement.
• Implement customer and Company requirements for quality, performance reliability and passenger safety for new installation projects.
• Support the local sales and project management team in estimating new installation bids, attending customer job progress meetings, as well as investigating and resolving customer complaints.
• Develop a spirit of teamwork and dedication to quality among all staff and field employees
• Participate in Company professional development programs to enhance working knowledge of Elevator Company products, services and procedures
What you bring
Bachelor’s degree preferred OR 3 years of technical experience in the elevator industry or related field.
• Ability to effectively manage and resolve sensitive employee relations issues
• Solid problem solving and proven negotiating skills, high sense of urgency, strong communication and interpersonal skills
• Excellent PC skills
What’s in it for you?
Fully vested 401k match, up to 7% of total eligible compensation.
Competitive Medical, Dental and Vision Plans - Effective from first day of hire.
3 weeks’ vacation which increases with tenure, 7 sick days, 3 floating holidays and 8 Company Observed Holidays.
Tuition Reimbursement - Eligible after 6 months of service.
Parental Leave – 100% base pay for 6 consecutive weeks within first year of a child’s birth or adoption.
A wide range of development opportunities to boost your professional and leadership growth.
We Elevate… Your Career
Become part of our team, help us enhance quality of life and drive innovation while raising the bar for safety and sustainability. We value your diverse skills and perspectives as together we shape the sustainable cities of today and tomorrow.
Don’t meet every single requirement? If you’re excited about this role but your experience doesn’t align perfectly with the qualifications listed in the job description, we encourage you to apply anyway! You may just be the right candidate for this or other roles!
Are you ready to embark on a new journey? Join #TeamSchindler! Our Core Values:
Safety: Uphold the highest safety standards for all.
Integrity and Trust: Foster honest, ethical relationships.
Create Value for the Customer: Deliver innovative, reliable solutions.
Quality: Ensure excellence in every product and service.
Commitment to People Development: Nurture our people, they are the heart of our success.
Discover more on our career website.
At Schindler Group we value inclusion and diversity, and practice equity to create equal opportunities for all. We endeavor that all qualified applicants will receive consideration for employment without regard to age, race, ethnic background, color, religious affiliation, union affiliation, gender, gender identity, sexual orientation, marital status, national origin, nationality, genetics and health, disability or veteran status.
Any unsolicited application from Recruitment Agencies is deemed to be rejected and does not constitute in any manner an offer from a Recruitment Agency.
Lead Security Technician
Location: Charleston, SC
Schedule: Full-time (typical construction hours; may vary by project)
Position Overview
We are seeking an experienced Lead Security Technician to support commercial security system installations across projects in the Charleston, SC area. This is a hands-on leadership role responsible for overseeing field crews, ensuring high-quality installations, and coordinating with project stakeholders to deliver successful security system deployments.
The ideal candidate brings strong experience in access control, CCTV, intrusion systems, door hardware, and structured cabling, along with the ability to lead teams and maintain professional jobsite standards.
Key Responsibilities
Field Leadership
- Lead and supervise installation teams on active job sites
- Assign daily tasks and ensure productivity and quality standards are met
- Serve as the primary point of contact between field teams and project leadership
- Maintain jobsite organization, safety compliance, and workflow efficiency
Security System Installation
- Install, terminate, and troubleshoot:
- Access control systems
- CCTV / IP camera systems
- Intrusion detection systems
- Install and wire door hardware including:
- Electric strikes
- Maglocks
- Door contacts
- Request-to-exit (REX) devices
- Card readers and keypads
Cabling & Infrastructure
- Pull, route, terminate, and test:
- Cat5e / Cat6 / Cat6A
- Composite access control cable
- Coax and low-voltage cabling
- Perform clean cable dressing, labeling, and pathway management
- Build and wire panels, enclosures, and head-end equipment
System Integration & Testing
- Assist with panel terminations and device integrations
- Support system testing, commissioning, and troubleshooting
- Ensure all installations meet project specifications and code requirements
Documentation & Communication
- Read and interpret blueprints, riser diagrams, and scopes of work
- Provide daily progress updates to project managers or supervisors
- Track materials, report issues, and coordinate solutions in real time
Required Experience
- 5+ years of experience in low-voltage / security system installation
- Proven leadership experience as a Lead Technician or Foreman
- Strong background in:
- Access control systems
- CCTV / surveillance systems
- Structured cabling and terminations
- Door hardware installation
Preferred System & Brand Experience
Experience with one or more of the following platforms is highly preferred:
- Access Control: Lenel, LenelS2, Software House (CCURE), Genetec, Avigilon, Brivo, AMAG, Honeywell, Openpath
- CCTV / VMS: Avigilon, Genetec, Milestone, Hanwha (Wisenet), Axis
- Intrusion Systems: Bosch, Honeywell, DSC, DMP
Technical Skills
- Strong understanding of low-voltage wiring and system architecture
- Experience with panel wiring and device integration
- Ability to troubleshoot systems independently
- Proficient in reading prints and executing scopes with precision
Requirements
- Valid driver’s license and reliable transportation
- Ability to pass background check (required for secured sites)
- OSHA 10 (preferred but not required)
- Ability to lift 50+ lbs, climb ladders, and work in construction environments
Tools & PPE
- Must have own basic hand tools (termination tools, drills, testers, etc.)
Project Manager
Location: Tampa, FL (On-site with field work)
Type: Full-Time, Permanent
Salary: $80,000-90,000 (Plus $3k quarterly bonus based on performance)
Are you an organized, people-focused project leader who loves seeing projects come to life in the real world? Do you enjoy coordinating teams, juggling timelines, and making sure everything comes together seamlessly—whether it’s for a stadium, retail space, or a large commercial environment?
My client is seeking a Project Manager who will play a key role in delivering large-format graphics, signage, and branding installations across major venues and environments. You will collaborate with internal teams, field crews, and third-party partners to ensure every project is completed safely, accurately, and on schedule.
If you thrive on variety, problem‑solving, and working closely with both office and field teams, this role will feel like a perfect fit.
What You’ll Do
Manage Projects from Kickoff Through Installation
- Plan and coordinate all phases of signage and graphics projects, ensuring timelines, budgets, and scope remain aligned.
- Partner with Production, Sales, and Engineering to prepare deliverables before installation.
- Proactively identify risks and develop solutions.
Collaborate Across Teams
- Maintain consistent communication with stakeholders to ensure alignment.
- Work closely with installation teams (internal and subcontracted) to support project execution.
- Coordinate site surveys, documentation, logistics, and installation planning.
Support Field Operations
- Ensure installation crews have accurate plans, access details, and materials.
- Manage scheduling, equipment needs, and on-site issue escalation.
- Uphold quality standards and ensure finished work matches the intended design.
Champion Safety, Quality, and Process Improvements
- Promote safe work practices across all field operations.
- Maintain accurate project documentation and support project closeout.
- Identify opportunities to enhance workflows and delivery processes.
Who You Are
You enjoy being the communication hub and keeping all moving parts organized. You are resourceful, adaptable, and confident managing multiple projects simultaneously.
You bring:
- Five or more years of experience in signage, large-format graphics, construction, installation coordination, or similar project environments.
- Strong communication and collaboration skills with both field and office teams.
- Ability to read installation drawings, schedules, and technical documentation.
- Experience managing project logistics, timelines, and vendor coordination.
- Technical understanding of graphics materials, substrates, and installation practices.
- Bilingual English/Spanish is a strong plus.
Additional Details
- Valid driver’s license required.
- Ability to lift up to 50 lbs and occasionally work at heights.
- Includes both office and on-site field work; travel may be required.
What the Client Is Looking For
Based on my meeting with the hiring team, they are looking for someone who is:
- Organized, proactive, and effective at navigating fast-moving projects.
- A strong communicator who can work across departments and with clients.
- Comfortable being hands-on and present during installations.
- Aligned with core values: kindness, responsibility, customer focus, results, and enjoying the work.
Tidewater Staffing is currently seeking Outside Machinists for work in various local shipyards including locations of Newport News, VA, Norfolk, VA, and Portsmouth, VA.
The Outside Machinist must possess knowledge, skills, and abilities to perform job operations/tasks on conventional and nuclear ships and submarines. The Outside Machinist must be assignable to any work center excluding nuclear and subsafe machinery.
The following is a list of typical work that an Outside Machinist might be asked to perform:
- Remove, repair, overhaul, install and align main propulsion machinery and associated equipment/components. Also remove, repair, overhaul, install, and align equipment associated with auxiliary systems such as condensers, compressors, pumps, forced draft blowers, main feed pumps, various types of valves, cargo handling machinery, anchor handling gear, boat davits, cranes, elevators, conveyors, firefighting equipment, machine shop equipment, galley, and laundry equipment.
- Install and repair foundations for operating machinery and principal structures/components of the ships armament.
- Install, adjust, set, and repair or replaces various control/regulating or safety devices such as meters, gauges, valves, governors, and automatic alarms. Test or assist in the testing of shipboard machinery pier side or on sea trials to prove satisfactory operation and acceptance.
- Use various portable and fixed machine tools such as boring bars, milling machines, facing machines, and drill presses. Use precision measuring instruments such as height gages, depth gages, calipers, verniers, and various types of micrometers, and assists in the use of optical equipment.
- Coordinate and arrange for the work of several trades in connection with performing work from information received from technical work documents, blueprints, specifications, and written and/or oral instructions.
- Engineer, steam, machinist, installation, marine erector, marine machinist, outfitter, outside-installation machinist Installs ship machinery, for example, propelling machinery, auxiliary motors, pumps, ventilating equipment, and steering gear, working from blueprints and using hand tools, calipers, and micrometers.
- Lays out passage holes on bulkheads, decks, and other surfaces for connections, for example shafting and steam lines.
- Installs below-deck auxiliaries, for example, evaporators, stills, heaters, pumps, condensers, and boilers, and connects them to steampipe systems.
- Tests and inspects installed machinery and equipment during dock and sea trials.
- May also set up and operate such machine shop tools as lathe, boring mill, planer, shaper, slotter, and milling machine to fabricate replacement parts.
About the Organization
RoadSafe Traffic Systems is the largest national provider of traffic safety products and services in the United States. RoadSafe serves customers in all 48 contiguous states through its network of more than 60+ branch locations. At RoadSafe, we offer competitive pay, growth potential, and an excellent benefits package, including medical, dental, vision, and 401(k) plans for those who qualify. We recognize and value diversity and are committed to creating an inclusive environment for all employees.
Position Summary:
The DOT Sign Installer is responsible for installing signs on state highways and other roadways, working either independently or as part of a sign installation control crew. This role includes setting up and maintaining safe work zones as required to ensure the safety of both the crew and the public.
Essential Functions:
- Install, remove, and maintain DOT roadway signs, posts, and related hardware.
- Ensure all installations meet DOT, MUTCD, and company safety standards.
- Assemble and install sign posts using a jackhammer and other necessary tools.
- Read and interpret blueprints, work orders, site plans, and installation specifications to ensure accurate installation.
- Operate hand and power tools, jack hammers, drills, and basic construction equipment.
- Drive the sign installation vehicle with a trailer to and from project sites and operate safely on work sites.
- Load, transport, and unload signs, posts, and materials to and from job sites
- Perform routine inspections and repairs of existing signage.
- Follow all safety protocols, including PPE and traffic control procedures.
- Maintain a clean and safe job site at all times.
- Communicate effectively with supervisors and crew members.
Education, Experience, and Skills Required:
- Previous experience installing DOT or roadway signage in sign installation or a similar trade is required; certification from ATSSA as a Worksite Traffic Technician or Supervisor is preferred.
- Must possess a valid driver's license and meet federal DOT requirements; a CDL Class B is preferred.
- Working knowledge of DOT and MUTCD standards.
- Experience using construction tools and equipment.
- Ability to work outdoors in varying weather conditions.
- Ability to understand and follow directions as provided by supervisors and project leads.
- Capability to lift and carry a minimum of 50 pounds to handle materials and equipment.
EOE Statement
RoadSafe is an Equal Opportunity Employer/including Disabled/Veterans
Wellpoint installer:
Introduction
Join Atlas Dewatering, a Holland Pump Company as a Wellpoint Installer and play a crucial role in our construction and dewatering projects. As a skilled professional, you will be responsible for installing, maintaining, and dismantling wellpoint systems to ensure efficient groundwater control. Your expertise will contribute to successful project outcomes, and you will work alongside a dedicated team committed to quality and safety.
Job Responsibilities:
- Install wellpoint dewatering systems according to project specifications and safety standards.
- Conduct site assessments to determine the optimal placement of wellpoints.
- Operate and maintain installation equipment such as pumps, hoses, and driving tools.
- Troubleshoot and resolve any issues that arise during installation.
- Coordinate with project managers and other team members to ensure timely completion of installations.
- Perform routine maintenance on wellpoint systems to ensure efficient operation.
- Document installation procedures and maintain accurate records of work performed.
- Adhere to all safety regulations and protocols during installation and maintenance activities.
- Communicate effectively with clients to address any concerns or queries related to wellpoint systems.
Job Requirements:
- High school diploma or equivalent.
- Valid driver's license or CDL.
- Proven experience in wellpoint installation or related field.
- Knowledge of wellpoint systems, dewatering techniques, and equipment.
- Ability to read and interpret technical drawings and specifications.
- Proficiency with hand and power tools required for installation.
- Strong problem-solving skills and attention to detail.
- Ability to work outdoors in various weather conditions.
- Physical strength, stamina and able to lift 50 LBS / 70 LBS.
- Good communication skills for interacting with clients and team members.
- Ability to work independently and as part of a team.
- Availability to work flexible hours, including weekends and overtime if needed.
- Familiarity with safety regulations and best practices in construction and dewatering.
Benefits Include:
- Holland Pump offers a competitive salary and benefits package to include Medical/Dental Insurance, 401(k) with Match, Paid PTO/Holidays, Life Insurance, Short-Term/ Long-Term Disability Insurance and Uniforms. Our average employee has 10 years of service!
Holland Pump is an Equal Opportunity Employer, Veteran's employer, and Drug Free Workplace
Job Type: Full-time
PIf7b35690f525-26276-39983905
