Arch Linux Install Guide Github Jobs Salary Jobs in Usa

Company Description

MSS, Inc., based in Nashville, Tennessee, designs and manufactures advanced sensor-based optical sorting equipment for the recycling and waste management industry. Since 1974, MSS has served a variety of applications, including single and dual-stream MRFs, plastic recycling, construction and demolition recycling, metal recycling, and electronic scrap processing. As a division of the CPG Group, MSS is part of a team dedicated to delivering high-quality recycling equipment and turnkey systems to empower customers as industry leaders.

Role Description

This is a full-time, on-site role located in Nashville, TN, for a Field Installation Technician. The Field Installation Technician’s primary responsibilities will be the assembly and setup of the

equipment for a customer project. This will include coordinating with the Service Manager,

Project Manager, subcontractors and customer the installation of the machinery and equipment

in the customer facility. The installation will include testing and adjusting or recommendations to

bring the equipment to an operating state.

Complete tasks related to the installation, power up and setup of the equipment and software.

This position will install machine components, route and terminate pneumatic lines, route and

terminate flexible electrical conduits and the related wiring/cabling

Responsibilities:

• Install, commission, maintain, repair, and set up sensor-based sorting equipment.
• Assemble machine components and perform mechanical alignment using hand and power tools.
• Route and terminate pneumatic lines, electrical conduits, and wiring/cabling.
• Conduct pre-shipment testing and quality control following company procedures.
• Perform onsite service, preventative maintenance, and equipment cleaning.
• Produce detailed service reports, PM trip reports, and other required documentation.
• Establish strong relationships with customers and maintain clear communication.
• Support the production team as needed.
• Perform other duties as assigned.

Required Qualifications:

• 2+ years of hands-on experience in similar duties.
• Ability to follow instructions and retain technical information.
• Adaptability and flexibility to changing priorities.
• Strong communication skills for collaborating with coworkers, management, customers, and subcontractors.
• Proficiency with hand tools, power tools, meters, and gauges.
• Ability to read mechanical and electrical blueprints and schematics.
• Ability to work efficiently under time constraints.

Preferred Qualifications:

• Knowledge of machine design, repair, and maintenance.
• Understanding of electrical and electronic circuits and diagnostic tools.
• Basic knowledge of mechanical, pneumatic, and electrical systems.
• General PC skills, including minor troubleshooting.
• Prior ERP experience.
• Bilingual English-Spanish preferred.

Licenses/Certifications:

• Valid driver’s license with a clean record.
• Ability to obtain a passport.

Work Conditions:

• Work in indoor and outdoor environments.
• Flexible shifts with the ability to adapt to changing schedules at customer sites.
• On-call availability with possible overtime or weekend work.
• Ability to lift up to 70 lbs.

Travel:

• Travel to customer job sites is required, including weekend and multi-week trips.
• Estimated time away from the office: 30–40%.

MSS, Inc.

300 Oceanside Dr, Nashville, TN 37204

651-578-12669 |

Since 1953, Ferguson has been a source of quality supplies for a variety of industries. Together We Build Better Infrastructure, Better Homes and Better Businesses. We exist to make our customers' complex projects simple, successful, and sustainable. We proactively solve problems, adapt and grow to continuously serve our customers, communities and each other. Ferguson, a Fortune 500 company, is proud to provide best-in-class products, service and capabilities across the following industries: Commercial/Mechanical, Facilities Supply, Fire and Fabrication, HVAC, Industrial, Residential Trade, Residential Building and Remodel, Waterworks and Residential Digital Commerce. Ferguson has approximately 36,000 associates across 1,700 locations. Ferguson is a community of proud associates who operate with the shared purpose of building something meaningful. You will build a career that you are proud of, at a company you can believe in.

We realize that our greatest assets are our best-in-class associates, which is why we're dedicated to offering limitless opportunities for growth and advancement. We want to help you build a long-lasting career with Ferguson. Together, we can continue to lead the industry and help build our nation's infrastructure from the ground up. Join our team today.

Ferguson is currently seeking the right individual to fill an immediate need for an Installation Coordinator.

• Proactively develop and maintain relationships with an assigned customer base, including key accounts and ensuring their satisfaction with our products and services
• Collaborate with sales teams to understand the customer requirements
• Review and modify work orders for accuracy of scope, clarity, required dates, customer contact information and product availability
• Contact customer for scheduling of events: pre-site, delivery and installation
• Update Installation Calendar with pertinent job condition
• Track and record number of installations by product type
• Receive pre-site notes, exit checklist, change orders, pictures and invoices for storage, and processing customer advocacy; Provide formal and final pricing to customer for services requested; Point of contact for questions, concerns, and/or complaints
• Write credit memos and sales orders as needed for returns and rescheduled appointments

• Prior installation coordinating experience is strongly preferred
• Ability to apply expert level product and installation knowledge
• Ability to organize and prioritize work and communicate effectively
• Ability to develop and maintain positive relationship with both internal and external customers
• Familiar with Microsoft Office software (Outlook, Word, Excel, PowerPoint, etc.)

At Ferguson, we care for each other. We value our well-being just as much as our hard work. We are committed to a holistic approach towards benefits plans and programs that support the mental, physical and financial well-being of our associates. Our competitive offering not only includes benefits like health, dental, vision, paid time off, life insurance and a 401(k) with a company match, but our associates also enjoy additional meaningful and inclusive enhancements that are adaptable to their diverse situations and needs, including mental health coverage, gender affirming and family building benefits, paid parental leave, associate discounts, community involvement opportunities and more!

Pay Range: $15.00 - $25.39

Estimated Ranges displayed are Monthly for Salaried roles OR Hourly for all other roles.

This role is Bonus or Incentive Plan eligible.

Ferguson complies with all wage regulations. The starting wage may be higher in certain locations based on local or state wage requirements.

The Company is an equal opportunity employer as well as a government contractor that shall abide by the requirements of 41 CFR 60-300.5(a), which prohibits discrimination against qualified protected Veterans and the requirements of 41 CFR 60-741.5(A), which prohibits discrimination against qualified individuals on the basis of disability. Ferguson Enterprises, LLC. is an equal employment employer F/M/Disability/Vet/Sexual Orientation/Gender Identity.

Breathe Easy of CNY Heating & Cooling, recently recognized as Syracuse.coms 2024 CNY Readers' Choice #1 Heating/Cooling company in Central New York, is a well-established leader in both residential and commercial HVAC installation. We pride ourselves on our commitment to quality, customer satisfaction, and a supportive team environment. As we continue to grow, we are seeking experienced HVAC Installation Technicians who are passionate about their craft and eager to advance their careers with a company that values dedication, teamwork, and professional development. Join a company where your contributions are recognized, and your growth is supported.

Responsibilities

• Install and design heating and cooling equipment and systems for residential and commercial clients
• Maintain a clean and organized work environment, including company vehicles and equipment
• Utilize a company-supplied iPad to document installations and complete work orders accurately
• Collect payment for services rendered when required
• Address and follow up on any equipment issues to ensure customer satisfaction
• Submit all required paperwork to the office, ensuring completeness and accuracy
• Maintain minimum required stock on the company vehicle for installations
• Recommend and sell equipment, service agreements, and accessories when appropriate for the customer

Qualifications

• At least 1 year of experience in HVAC installation (preferred)
• EPA Type II Certification (preferred)
• Valid NY Drivers License
• Ability to work effectively in both residential and commercial environments
• Strong work ethic and commitment to excellent customer service
• Reliable, team-oriented, and able to maintain a drug-free workplace

Compensation

$21.00 $35.00 per hour, based on experience and performance. Additional earning potential through commission, bonuses, and tips.

Benefits

• Competitive pay with opportunities for commission and bonuses
• Paid holidays and paid vacation to support work-life balance
• Birthday paid day off to celebrate your special day
• Company-paid uniforms for a professional appearance
• Company-paid medical insurance for your health and well-being
• Dental insurance options for you and your family
• Company matching IRA retirement account to help you plan for the future
• Ongoing paid training and career development to support your growth
• Company-supplied iPad and truck
• Overtime pay opportunities

Required qualifications:

• Legally authorized to work in the United States

Preferred qualifications:

• 20 years or older

Job Overview 

Mondo Media Solutions (MMS) is seeking a highly skilled Audio Video Field Installation Engineer to join our team. We specialize in full-service installations of audio, video, Theatrical lighting, access control, and surveillance systems for commercial applications. Located in Philadelphia, PA, this role offers both full-time and contract opportunities. 

Responsibilities 

• Lead installations, maintenance, and troubleshooting of commercial audio/video systems, including conference rooms, access control, and security camera systems. 
• Install projection systems, wiring, termination A/V systems, loudspeakers, cameras, and displays. 
• Troubleshooting basic network routers and switches. 
• Engage in DSP programming, particularly with Q-SYS, 
• Install and Troubleshoot conference room setups and equipment. 
• Fabricate racks, pull and dress cables, and manage cable terminations. 
• Provide friendly customer service during installation and servicing tasks. 
• Updating onsite installation software throughout the day. 

Requirements 

• Minimum 5 years of experience as a commercial A/V installer. 
• Must be able to independently diagnose and repair onsite issues with networking, security cameras, distributed audio systems, and conference room systems.  
• Proficient in DSP programming, preferably with QSYS, Extron 
• Experienced in control systems, QSC QSYS systems, including coding and troubleshooting. 
• Familiar with using power tools like drills, saws, and rotary hammers.
• Obtain or pass OSHA 10 certification within 30 days and Obtain or pass OSHA 30 certification within 90 days  
• CTS certification within 90 days 
• Strong organizational skills, attention to detail, and the ability to manage multiple projects. 
• Excellent communication skills, both verbal and written. 
• Ability to safely lift up to 50 pounds work comfortably on ladders up to 12 feet, and lifts over 26 feet. 
• Proficiency in soldering and cable terminations, including XLR, TRS, RCA, and more. 
• Familiarity with Microsoft Office and various web-based portals. 
• Ability to fit into tight spaces and quickly learn new computer programs. 

Compensation & Benefits 

• Medical and Dental Benefits
• 401K 
• Company Vehicle Use 

Additional Information 

• Candidates must be detailed, organized, and have a proven track record of reliability. 
• Committed to the company's Mission, Vision, and Values. 
• Ability to identify and handle various cable types and connectors. 
• Experience with basic and advanced hand tools is essential. 

About Mondo Media Solutions 

Mondo Media Solutions specializes in custom audiovisual, IT, and security systems for businesses, schools, and government. From boardrooms and auditoriums to digital signage, we deliver reliable, scalable technology solutions with a commitment to integrity and customer satisfaction. 

**Multiple Openings**

The Railing Install Laborer assists in the installation, repair, and replacement of railing systems on commercial and residential restoration projects. This role supports work involving metal, aluminum, steel, and specialty railings. Responsibilities include demolition, measuring, anchoring, fastening, sealing, and finishing tasks. Candidates must bring skilled labor experience, a strong work ethic, and the ability to perform precise, detail‑oriented work in the field.

Key Responsibilities

• Assist with the installation, removal, and repair of railing systems including metal, aluminum, and steel railings.
• Measure, mark, and prepare installation areas including drilling, anchoring, and mounting hardware.
• Set railing posts, panels, and components to ensure proper alignment and structural stability.
• Use hand and power tools such as drills, grinders, saws, and impact drivers.
• Perform caulking, sealing, and touch‑up work to ensure weather resistance and clean finishes.
• Support related scopes including stucco patching, waterproofing, paint/primer, and concrete repair as needed.
• Work safely from heights including scaffolding, swing stages, lifts, and ladders.
• Maintain a clean jobsite and care for tools and equipment.
• Follow safety guidelines and communicate effectively with foremen and crew members.

Required Skills & Qualifications

• Skilled labor experience required (unskilled labor not accepted).
• Experience with railing installation, carpentry, metal work, or similar trades preferred.
• Ability to read measurements accurately and perform precise, detailed work.
• Must be able to pass E‑Verify.
• Comfortable working at heights using lifts, scaffolds, or swing stages.
• Reliable transportation preferred.
• Ability to safely lift 50+ lbs and perform physical labor outdoors.
• Strong problem‑solving skills and attention to detail.
• Positive attitude, dependability, and willingness to learn advanced installation techniques.

Benefits

• $0‑cost basic health plan (optional upgrades available)
• Dental and vision insurance
• Health coverage begins the 1st of the month after 60 days
• Annual performance reviews and advancement opportunities
• Clear career path for workers who show skill growth, reliability, and quality workmanship

Please note: this posting is not eligible for visa sponsorship.

Position Summary:

Plan, direct, and coordinate residential fence sales to solve customer needs. Provide unparalleled customer service to new and existing clients. Ensure customer needs are met on a timely basis.

Primary Responsibilities:

• 
  
• 
  

  Serve as contact for customers seeking residential fence installation.

  
  
  
• 
  

  Meet with customers on-site to best determine:

  
  
  
  • 
    
  • 
    

    Fence Layout

    
    
    
  • 
    

    Site Access

    
    
    
  • 
    

    Digging Conditions

    
    
    
  • 
    

    Any other pertinent information regarding the potential fence installation at this location

    
    
    
  
  
  
• 
  

  Prepare estimates, insuring timeliness, accuracy and fairness.

  
  
  
• 
  

  Determine material needs for projects. If not available in current inventory, request Purchasing Manager to order material.

  
  
  
• 
  

  Verify materials are staged for projects and ready for installation.

  
  
  
• 
  

  Coordinate installation of all residential projects with scheduling manager and installation crews.

  
  
  
• 
  

  Follow up on estimates and leads for all residential sales.

  
  
  
• 
  

  Identify and report improvement opportunities in every aspect of the division.

  
  
  
• 
  

  Attend department meetings to maintain communication with all members of the team.

  
  
  
• 
  

  Remain in constant communication with leadership to monitor sales progress and new opportunities.

  
  
  
• 
  

  Other responsibilities as directed or assigned.

  
  
  

Position Specifications:

* Minimum Education - bachelor's degree or related experience preferred.

* Sales Experience - At least 2-5 years of industry or related experience preferred.

* Computer Knowledge - Microsoft Outlook, Excel and Word preferred. Bluebeam experience is a plus.

* Supervision - Reports to Division Operations Manager.

a {
text-decoration: none;
color: #464feb;
}
tr th, tr td {
border: 1px solid #e6e6e6;
}
tr th {
background-color: #f5f5f5;
}

Compensation includes a $45,000-$60,000 base salary, with the potential to earn over $100,000 annually with commissions

Benefits:

• 
  
• 
  

  Paid time off

  
  
  
• 
  

  401(k) matching

  
  
  
• 
  

  Health insurance

  
  
  
• 
  

  Retirement plan

  
  
  
• 
  

  Military leave

  
  
  
• 
  

  HRA

  
  
  
• 
  

  Vision Insurance

  
  
  
• 
  

  Dental insurance

  
  
  
• 
  

  Disability insurance

  
  
  
• 
  

  Life insurance

  
  
  
• 
  

  Paid holidays

  
  
  
• 
  

  Flexible schedule

  
  
  

Who we are:

With over 40 years of experience, AFSCO, a division of Pro Max Fence Systems, LLC has become a trusted leader in the Upstate New York market and is committed to providing safe, high-quality, and customer-focused perimeter security solutions through Professional Service and Maximum Value.

Established in 2006, Pro Max Fence Systems, LLC has become a trusted leader in perimeter security, delivering top-quality fencing solutions for commercial and residential applications. We proudly serve diverse industries, including transportation, utilities, education, government, corrections, and residential development, offering a range of products such as chain link, ornamental fencing, automated gate systems, access control, sound walls, and high-security barriers. Our work is driven by core values that shape every decision and partnership: Safety-Minded, Integrity, Customer First, Respectful, Quality-Focused, Collaborative, Driven, and Innovative.

With multiple branch locations across the Northeast including Reading, Wrightsville, Mohrsville, Pittsburgh and State College, PA; Bridgeville and Milford, DE; Albany and Syracuse, NY, we proudly serve customers throughout Pennsylvania, Maryland, New Jersey, Virginia, Delaware, and New York.

For further information visit our website at

Top skills:

• Experience with high-speed cable manufacturing equipment is a plus but not required (jacketing, ribbon stranding, buffering)

• Experience with mechanical equipment design, install, start-up and debug in a high-volume manufacturing environment. Candidate must have 5+ years demonstrated leadership experience with coordinating scheduling, workflows, etc..

• Managing mechanical and electrical trades (both internal and external) executing equipment install and debug.

• Skilled with use of design software (AutoCAD, Solidworks, Inventor)

Scope of Position:

• A mechanical engineer responsible for leading and providing hands-on mechanical support for the installation, start-up and debug of high-cable manufacturing process equipment. This includes working with a multi-functional team (mechanical, electrical, controls, facilities, IT, operations, etc.)

• Involves the application of mechanical principles encompassed in mechanics, hydraulics, thermodynamics, metallurgy, and machine design used for the design, production, operation, and use machinery of all types.

Requirements:

• Experience with high-speed cable manufacturing equipment is a plus but not required (jacketing, ribbon stranding, buffering)

• Experience with mechanical equipment design, install, start-up and debug in a high-volume manufacturing environment

• Managing mechanical and electrical trades executing equipment install and debug.

• Skilled with use of design software (AutoCAD, SolidWorks, or Inventor)

• Knowledge of machine guarding and safety practices and standards (OSHA,

ANSI, ASME, etc) OSHA 30 Certification desired

• Good written and oral communication skills

• Ability to collaborate and work with diverse teams (skills, gender, culture, race, etc.)

• Capable of multitasking

• Ability to work with minimal direction

• Independently determines and develops approaches to solutions

• Familiarity with other engineering disciplines (electrical, civil, process, etc.)

American Equipment Holdings is an organization of leading overhead crane and hoist fabricators, distributors and field service providers, including American Equipment, Allied Crane, Eastern Crane & Hoist, Facilities Engineering, Kistler Crane & Hoist, Pacific Crane & Hoist, Patriot Crane & Hoist, Shannahan Crane & Hoist, and Washington Crane & Hoist. The consolidated entity is one of the largest independently owned overhead crane and hoist solutions providers in the country, serving over 4,000 customers nationwide.

Together, American Equipment Holdings companies provide comprehensive solutions for everything related to customers’ overhead crane and hoist needs, including OSHA mandated inspections, preventative maintenance and repair field services, parts, engineering, ISO certified fabrication, new and replacement equipment, automated systems, system modernizations and training.

We are looking for a Field Maintenance Install Technician (Experienced Ironworker) in our Anaheim location.

Essential Duties and Responsibilities:

• Work as part of team to install equipment. With a focus on safety and customer service.
• Accurately and neatly document work performed using a combination of electronic forms, software applications, and traditional handwritten reports where required.
• Maintain a clean and safe work environment.
• Travel may be required to install sites.

Required Skills/Abilities

• Iron work/steel erection experience.
• Aptitude for either electrical or mechanical environments as well as familiarity with mechanical and electrical equipment
• Comfort with working at heights
• Welding experience- Wire Feed (MIG), Stick (SMAW)
• Hands-on electro-mechanical maintenance or equivalent military experience a plus
• Competence in equipment operation. Reach forklifts, scissor lifts.
• Ability to read blueprints and schematics
• Ability to work well in a team environment.
• Strong communication skills
• Proven commitment to safety
• Passion for doing things right the first time.
• Industry certifications including equipment operator, Welding, Rigging will be a plus.
• Willingness to work overtime is required
• Possession of a valid driver’s license with good driving record
• Must pass drug-screen and background check

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

American Equipment Holdings represents the industry’s leading manufacturers such as Detroit Hoist, Columbus McKinnon, ACCO, R&M, Demag, Gorbel, Spanco, IMS, Harrington, Conductix, Magnetek & PE, among others and customers rely on its design, engineering, fabrication and installation capabilities to meet their unique application needs. American Equipment Holdings serves local, regional and national customers across a variety of end markets, including light & heavy industrial, automotive, mining, public utilities, military, aerospace & defense and energy, among others. For more information, visit of right to lawfully work in the United States required.

We are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.

Compensation details: 24-32 Hourly Wage

PI0012ccf6d90e-37344-39505075

• 
  
• Manage and Schedule Plattsburgh Branch personnel including field and shop
  
• Serve as primary contact for customers, with the full understanding of individual project requirements.
  
• Check jobsites in preparation for estimate and, if sold, installation.
  
• Identify unsafe site conditions and advise crews of proper safe job procedures.
  
• Communicate with Purchasing Manager to order materials for projects
  
• Preform site visits for commercial and residential quote requests.
  
• Prepare job packets for crews and schedule underground utility checks.
  
• Stake fence-lines and insure project is ready for installation crews.
  
• Verify materials are staged for projects and ready for loading.
  
• Coordinate equipment assignment on a daily basis.
  
• Monitor crew progress on projects review man hours expended to budgeted man hours.
  
• Coordinate all change orders including documentation, approval and invoicing.
  
• Verify installed quantities for billing, coordinate invoice preparation with administrative department.
  
• Schedule inspection and acceptance of installed work.
  
• Identify and report improvement opportunities in every aspect of the division.
  
• Attend department meetings to maintain communication with all members of the team.
  
• Receiving Materials and coordination with purchasing
  
• Assist with hiring Plattsburgh personnel as needed
  
• Other responsibilities as directed or assigned.
  

• 
  
• Bachelor's Degree in Business Administration or Associate's Degree in Construction Management.
  
• 3-5 Years Experience in Management or similar role.
  
• Industry knowledge or fence/construction experience preferred.
  

• 
  
• Paid time off
  
• 401(k) matching
  
• Health insurance
  
• Retirement plan
  
• Military leave
  
• HRA
  
• Vision Insurance
  
• Dental insurance
  
• Disability insurance
  
• Life insurance
  
• Paid holidays
  
• Flexible schedule