Arch Linux Install Guide Github Jobs Hiring Now Jobs in Usa

At Arbon Equipment, a Rite-Hite Company, your work makes an impact. We deliver industry-leading solutions that keep workplaces safe, productive, and efficient. When you join Arbon Equipment, you're not just selling or servicing equipment - you're building trusted partnerships with customers and growing your career with a company backed by the strength of Rite-Hite's global innovation.

ESSENTIAL DUTIES AND RESPONSIBILITIES

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.

• Timely and proper inspection, repair, maintenance, and installation of customer equipment in a manner that exceeds customer expectations and that is consistent with Rite-Hite's image as the industry leader in customer service.

• Develop and maintain good customer relations in a manner that exemplifies Rite-Hite's image and commitment to customer service.

• Compliance with all company policies and safety guidelines.

• Perform installation, inspection, and repair of equipment in the field in an expeditious manner while assuring the customer's needs are met and exceeded. This is mainly accomplished individually but may sometimes be accomplished in small teams.

• As skills and knowledge develop, guide other Service Technicians with less skills/knowledge through complex problems in the field. This may include training other Service Technicians in the proper field installation, service and repair of equipment and proper administrative procedures instilling Rite-Hite's commitment to customer service.

• Using the handheld devices (or paper backup forms if needed) accurately complete all necessary paperwork associated with field service, repair, and installation, including service tickets, timesheets, open job tracking form and safety analysis sheets.

• Maintain compliance with operation and communication standards as per the Field Service Technician Handbook.

• This position requires the operation of a service vehicle in compliance with DOT Driver Qualification standards, as well as truck-based cranes, forklifts, welders, torches, and power and hand tools.

• Follow all customer-specific requirements, policies, safety guidelines and directions on their work sites.

• Work closely with all other departments in the company, communicating and coordinating activities to efficiently maximize customer satisfaction.

• "Occasional (under 20% annually) domestic overnight travel may be required for training, supporting customers at other offices, etc. may be required."

• Other duties may be assigned.

EDUCATION and/or EXPERIENCE

The successful individual will possess:

• Experience in the dock and door industry

• High school diploma or general education degree (GED); and

• One to five year's experience in repair and service of hydraulic, mechanical, and electrical equipment

KNOWLEDGE / SKILL REQUIREMENTS

The ideal individual will demonstrate:

• Service Technicians must have a valid drivers license

• Passing DOT medical exam

• Applicable driver qualification standards at all times.

• Ability to read and interpret documents such as safety rules, blueprints & schematics, operating and maintenance instructions, and procedure manuals.

• Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.

• Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.

• Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.

SUPERVISORY RESPONSIBILITIES:

This role will not have supervisory responsibilities.

What We Offer

At Arbon Equipment - A Rite-Hite Company, we take care of our people - because when you're supported, you can do your best work. Our benefits are designed to support your health, your future and your life outside of work:

• Health & Well-being: Comprehensive medical, dental, and vision coverage, plus life and disability insurance. A robust well-being program with an opportunity to receive an extra day off and more.

• Financial Security: A strong retirement savings program with 401(k), company match, and profit sharing.

• Time for You: Paid holidays, vacation time, and personal/sick days each year.

Join us and build a career where you're supported - at work and beyond.

Rite-Hite is proud to be an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic under federal, state, or local law.In accordance with VEVRAA, we are committed to providing equal employment opportunities for protected veterans.We are also committed to maintaining a drug-free workplace for the safety of our employees and customers.

ESSENTIAL DUTIES AND RESPONSIBILITIES

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.

• Timely and proper inspection, repair, maintenance, and installation of customer equipment in a manner that exceeds customer expectations and that is consistent with Rite-Hite's image as the industry leader in customer service.

• Develop and maintain good customer relations in a manner that exemplifies Rite-Hite's image and commitment to customer service.

• Compliance with all company policies and safety guidelines.

• Perform installation, inspection, and repair of equipment in the field in an expeditious manner while assuring the customer's needs are met and exceeded. This is mainly accomplished individually but may sometimes be accomplished in small teams.

• As skills and knowledge develop, guide other Service Technicians with less skills/knowledge through complex problems in the field. This may include training other Service Technicians in the proper field installation, service and repair of equipment and proper administrative procedures instilling Rite-Hite's commitment to customer service.

• Using the handheld devices (or paper backup forms if needed) accurately complete all necessary paperwork associated with field service, repair, and installation, including service tickets, timesheets, open job tracking form and safety analysis sheets.

• Maintain compliance with operation and communication standards as per the Field Service Technician Handbook.

• This position requires the operation of a service vehicle in compliance with DOT Driver Qualification standards, as well as truck-based cranes, forklifts, welders, torches, and power and hand tools.

• Follow all customer-specific requirements, policies, safety guidelines and directions on their work sites.

• Work closely with all other departments in the company, communicating and coordinating activities to efficiently maximize customer satisfaction.

• "Occasional (under 20% annually) domestic overnight travel may be required for training, supporting customers at other offices, etc. may be required."

• Other duties may be assigned.

The pay range for this position is $20-35. We take geographic differentials into consideration in areas of higher cost of living. We offer nine paid holidays (New Year's Day, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Day After Thanksgiving, Christmas Eve, Christmas Day and New Year's Eve). New employees are eligible for up to two weeks of vacation (pro-rated based on hire date within 1st year of employment). We offer additional paid time off based on tenure. Based on time in the job, you will be eligible for additional PTO (vacation, sick leave, etc.). We offer 72 hours PTO (1 hour for every 40 worked) to employees in Colorado.

EDUCATION and/or EXPERIENCE

The successful individual will possess:

• High school diploma or general education degree (GED); and

• One to five year's experience in repair and service of hydraulic, mechanical, and electrical equipment

KNOWLEDGE / SKILL REQUIREMENTS

The ideal individual will demonstrate:

• Service Technicians must have a valid drivers license

• Passing DOT medical exam

• Applicable driver qualification standards at all times.

• Ability to read and interpret documents such as safety rules, blueprints & schematics, operating and maintenance instructions, and procedure manuals.

• Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.

• Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.

• Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.

SUPERVISORY RESPONSIBILITIES:

This role will not have supervisory responsibilities.

Arbon Equipment - A Rite-Hite Company is the global leader in the manufacture and distribution of industrial loading dock and door equipment. Our innovative products and world class sales organization ensure solid, consistent growth, both for our company and our staff. We are always looking ahead to develop innovative new products and services to improve our customers' safety, security, and productivity.

Arbon Equipment - A Rite-Hite Company provides competitive compensation and a comprehensive benefits package with medical, dental, and vision coverage along with life and paid medical leave. We also provide a retirement savings plan that combines 401(K) with company match and profit sharing. Paid holidays, vacation, and up to five paid personal/sick days per year round out the package.

Rite-Hite is an Equal Opportunity/Affirmative Action employer offering a drug free workplace for our customers and employees.

Title: Equipment Installation Mechanical Technician IV - 3 Openings

Location: Newton, NC

Duration: 12 Months

Hours: Monday - Friday 8 AM - 5 PM, Occasional OT

Travel Requirements: Project locations will range from Newton, NC and Hickory, NC

Only W2 candidates are eligible for this position. Third-party or C2C candidates will not be considered.

Scope of Position:

The Lead Equipment Installation Mechanical Technician is a senior-level technical role responsible for leading and executing complex mechanical equipment installations. This position provides on-site leadership, technical expertise, and coordination for installation projects, ensuring work is completed safely, on schedule, and in compliance with engineering specifications, quality standards, and customer requirements. The Lead Technician serves as a subject matter expert and mentor to junior technicians.

• This position is in the Engineering Project and is focused on capacity additions and the associated line installations & debug from a mechanical perspective.

• Lead and/or participate on manufacturing engineering projects and lead/support teams for the purposes of capacity installations, equipment debug, and preparing line/associated parts for Operations Receivership.

• As a leading team member, provide advanced mechanical discipline to proactively identify technical problems through root cause understanding coupled with robust industrialized solutions relative to line debug and installs.

• Leverage knowledge of mechanical and electrical engineering, machining & designing processes to improve performance of equipment/manufacturing process.

• Lead/support the development and execution of project plans to deliver timely error-free mechanical support for multi-line equipment installations

• Experienced with working along-side vendors and suppliers to resolve technical issues to protect scope, timing, and cost metrics.

• Ability to work, collaborate, cooperate, and utilize Best Practice across various functional groups on a daily basis to accomplish goals

•Interpret and work from detailed engineering drawings, schematics, blueprints, and installation manuals.

•Perform advanced mechanical tasks including rigging, leveling, precision alignment, torqueing, piping, and mechanical integration.

•Troubleshoot and resolve installation issues, equipment malfunctions, and mechanical interferences.

•Verify installations meet OEM specifications, safety codes, and quality standards.

Leadership & Coordination

• Act as on-site Lead Technician, directing daily activities of installation crews and subcontractors.

• Assign tasks, monitor progress, and ensure efficient use of labor and resources.

• Mentor and train junior technicians, providing hands-on guidance and technical instruction.

• Serve as the primary technical point of contact between field teams, engineers, project managers, and customers.

Quality & Documentation

• Conduct inspections and quality checks throughout the installation process.

• Complete installation reports, checklists, punch lists, and as-built documentation.

• Support equipment testing, startup, and customer acceptance activities.

Project Support

• Assist with installation planning, sequencing, and scheduling.

• Coordinate material handling, tools, and equipment needed for installations.

• Support continuous improvement initiatives and best practices in installation methods.

Day-to-Day Responsibilities:

• Maintain safe work practices, inform others of hazardous conditions or personal practices as expressed on project team.

• Manage and lead installation and debugging activities to meet milestone & timeline objectives for successful capacity adds.

• Design & implement mechanical solutions and process changes to improve capability of manufacturing equipment.

• Lead in or solve mechanical and process issues through data analysis, experience, and collaboration with subject matter experts

• Manage spare part identification and storeroom entry as recommended by suppliers or peer engineers, noting available spares within (2)-plant footprint.

• Develop and update engineering and operations documentation.

• Support training for the operations workforce regarding equipment or operations changes

• Perform advanced troubleshooting, diagnosis, and repair of mechanical systems, equipment, and machinery (e.g., pumps, motors, conveyors, hydraulics, pneumatics, etc.).

• Align, test, and calibrate mechanical systems after installation.

• Diagnose complex mechanical failures and recommend effective solutions.

• Interpret blueprints, schematics, and technical manuals to support troubleshooting and repair activities.

• Identify opportunities to improve equipment reliability, efficiency, and safety.

• Collaborate with other departments to implement process improvements.

Qualifications

Required Education:

• Associate's degree

• A high school degree will be considered with significant hands-on experience

Required Years and Area of Experience:

• 3+ years' experience in new equipment installations in a manufacturing environment, start-up experiences a plus

• Experience in a fast-paced, changing environment with multiple priorities

• Strong knowledge of mechanical systems, industrial equipment, and installation techniques.

• Proven ability to read and interpret engineering drawings and technical documentation.

• Experience leading crews in industrial, manufacturing, semiconductor, energy, or similar environments.

Required Skills:

• Ability to learn new technology and processes quickly

• Strong technical fundamentals with mechanical engineering skills

• Ability to multitask and prioritize work on an independent basis in a fast-paced project install manufacturing environment.

• Proficient with PC software, including Microsoft Office Suite

• Strong communication skills

• Expertise in mechanical systems such as hydraulics, pneumatics, bearings, gear systems, and conveyor systems.

• Ability to read and interpret technical drawings, blueprints, and schematics.

• Proficiency in using hand tools, power tools, and diagnostic equipment.

• Strong problem-solving, analytical, and critical-thinking skills.

• Knowledge of safety regulations and practices in an industrial setting.

• Basic computer skills for maintaining records and using CMMS (Computerized Maintenance Management Systems).

Certifications:

• Mechatronics trades highly desired

• Relevant mechanical or industrial certifications (e.g., Millwright, HVAC, or Welding) are a plus.

• OSHA or other safety certifications may be required.

Desired Skills:

• Hands-on experience in commercial manufacturing equipment

• Project leadership/management experience (including milestone management and financial ownership)

• Experience in vendor/supplier management on-site/off-site

• Experience with CAD

• SAP, Maximo, Maintenance Leadership

• Detail-oriented and able to perform with limited supervision.

Soft Skills:

• Leadership experience in technical project management

• Ability to work & effectively collaborate within a team

• Ability to allocate/supervise resources to accomplish aggressive project milestones & timeline within specification and costs.

• Able to shift tasks quickly

• Able to prioritize and multitask

• Communicate effectively both verbal and written

Hours of work/work schedule/flex-time:

• 40 hrs. (overtime expected). Due to the project timing; overtime and periodic off-hours coverage may be necessary to successfully complete workload and interact with other team personnel.

Manager - Electrical Installation Manager

Location: Nationwide Travel Required

Job Type: Direct Hire

Location: Cincinnati, OH; Charlotte, NC; Atlanta, GA

Overview

We are seeking an experienced Electrical Installation Manager to lead electrical field teams delivering complex automation and material handling installations across customer sites nationwide.

This role oversees the electrical installation of conveyor systems, robotics, and warehouse automation equipment, ensuring projects are completed safely, efficiently, and to high quality standards. The position works closely with mechanical installation teams, controls engineers, and project managers to ensure successful project execution.

What You’ll Be Responsible For

• Leading and developing electrical installers, foremen, and subcontractors across multiple projects
• Overseeing electrical installation for conveyor systems, material handling equipment, robotics, and automation systems
• Reviewing electrical drawings, schematics, and installation scope prior to project kickoff
• Ensuring compliance with NEC, OSHA, and customer standards
• Supporting system startup, troubleshooting, and commissioning activities
• Planning labor needs and deploying crews across active installations
• Coordinating work with mechanical installation teams, controls engineers, and project leadership
• Identifying site risks early and implementing corrective actions to maintain schedule and quality

What We’re Looking For

• 10+ years of industrial electrical installation experience within material handling, automation, conveyor systems, or similar environments
• 5+ years leading electrical field teams, foremen, or subcontractors
• Experience installing electrical infrastructure for automation systems, including motor controls, VFDs, sensors, safety systems, and industrial control panels
• Experience coordinating with mechanical installation teams, controls engineers, and project managers on complex installations
• Ability to manage labor planning, crew deployment, and installation schedules across multiple sites

What Success Looks Like

• Safe, high-quality installations with minimal rework
• Projects delivered on schedule with efficient labor utilization
• Strong field leadership and well-developed electrical teams
• Consistent installation standards across projects
• Positive collaboration with engineering, installation, and project teams

Ideal Background

This role is well suited for an experienced electrical leader coming from material handling, warehouse automation, conveyor systems, industrial installation, or large-scale facility buildouts who enjoys leading field teams and delivering complex projects.

About Diversified:

Diversified is a global leader in audio visual and media innovation, recognized for designing and building the world's most experiential environments. Our award-winning team specializes in delivering solutions for the most complex, large-scale and immersive installations. Serving a global clientele that includes major media organizations and retailers, sports and live performance venues, corporate enterprises, and government agencies, Diversified partners with clients to create spaces that bring people together and keep them coming back.

What to Expect:

At Diversified, we're on a mission to create a world without boundaries, where technology enables all people to connect and experience the moments that matter, wherever they choose to be. With clients spanning the globe and an exciting pipeline of projects across industries, Diversified offers more than just a job. We offer a career path with the flexibility to grow personally and professionally, wherever your ambitions take you.

As a Diversified associate, you'll dive headfirst into big, complex, and rewarding projects that push the boundaries of what's possible. Plus, you'll enjoy a flexible work environment, competitive compensation and benefits, and a culture that celebrates diversity and inclusion.

IF YOU CAN DREAM IT, YOU CAN DO IT AT DIVERSIFIED.

How You'll Contribute:

The installation technician is responsible for performing a wide variety of installation duties on technology projects for our clients. This position is the key field position for the bulk of the actual work that gets done in our clients buildings. The install tech needs to coordinate with project management, field superintendents and others to fully understand their role on specific projects. They interpret our drawing packages to create the basis of the finished systems. This installation can include displays, projectors, loudspeakers, microphones, equipment racks, etc. Will also provide advice and guidance to Associate Installation Technicians as necessary.

Location: Must live in the Washington DC - VA area.

What You'll Do:

• 
  
  
• Perform structured cabling installation: pull, terminate, label, and dress cables per project documentation and standards.
  
  
• Complete physical installation and wiring of AV devices (displays, speakers, microphones, cameras, control interfaces, etc.).
  
  
• Assemble, populate, and dress equipment racks with a high degree of workmanship and adherence to design documents.
  
  
• Solder and terminate connectors according to project specifications and accepted industry practices.
  
  
• Execute light physical construction tasks as required (e.g., blocking, mounting surfaces, hardware installation).
  
  
• Follow Diversified's installation procedures, quality guidelines, and safety protocols with minimal deviation.
  
  
• Maintain accurate daily records: timesheets, daily field reports, checklists, and as-built documentation.
  
  
• Collaborate effectively with Project Managers, Engineers, and Lead Technicians to ensure project milestones are met.
  
  
• Represent Diversified professionally on active job sites, including client and construction environments.
  
  
• Actively participate in ongoing training and skill development toward advancing technical proficiency.
  
  

Complexity:

This level of technician will be responsible for performing tasks on clients job sites with little supervision. On smaller projects this position may be responsible for the coordination with clients, contractors and subcontractors.

Decision Making Authority:

This position is often alone on the job sites and requires making good judgement about decisions that need to be made. In general the project manager and a site supervisor are available to answer questions. This position requires good diplomacy in working with our clients and other key stakeholders on the job sites.

Physical Working Environment:

Physical Demands:

The physical demands described here are representative of those that may be met by an employee. The employee may be exposed to construction site conditions on a regular basis. Employee will be responsible for their safety while on job sites and to comply with all safety regulations in place by the GC. Use of PPE is usually required on job sites. The employee can typically spend at least 60% of their time on their feet and be required to mobile around the construction site. The employee must have the ability to occasionally climb ladders, use stairs and lift and/or move materials up to 40 pounds in construction areas. The individual is regularly required to use keyboards, test equipment and controls required for SI installation projects. Specific vision abilities required for this job include close vision, distance vision, peripheral vision and depth vision. When not on construction sites, the employee will experience normal office conditions and be required to use office equipment such as computers, peripherals, etc.

Travel:

Frequent travel by car and occasional airplane trips are required. Employee must possess a valid driver's license in their state of residence. Employee will be required to use their own vehicle and will be reimbursed for mileage at the current corporate rate. Local travel to job sites (within a 2 hour driving distance each way) will make up 70-90% usually but remote travel can be up to 30% of the job at times. 10% remote travel is required on a regular basis.

What You'll Bring:

Education/ Certifications:

* High school or GED equal
* AVIXA CTS Certification is desired.
* Must have a valid drivers license and adhere to our insurance requirements
* OSHA 30 Certificate is highly desired. (NYC OSHA30 is desired)
* Other relevant certifications may be required or preferred based on the technology focus of the position.

Required Skills/Qualifications:

• 
  
  
• 1+ years as an associate technician and/or fabrication technician or related industry experience.
  
  
• Proven ability to perform core AV installation tasks with minimal direct instruction.
  
  
• Competency with hand tools, power tools, and installation materials required for AV integration.
  
  
• Strong understanding of cabling types, termination techniques, and device mounting requirements.
  
  
• Ability to interpret functional design drawings, cable riser diagrams, and architectural drawings.
  
  
• Comfortable working on ladders, lifts, and in construction environments.
  
  
• Strong work ethic, attention to detail, and commitment to quality workmanship.
  
  
• Effective communication skills and ability to collaborate within a project team.
  
  
• Flexibility and adaptability to evolving site conditions and project priorities.
  
  

What We Offer:

Along with competitive compensation, you will be eligible for the following benefits:

• 
  
  
• Multiple medical plan options to suit your family's needs
  
  
• Dental (including orthodontic coverage) and vision plans
  
  
• Company paid Basic Life, AD&D, Short-Term and Long-Term Disability Insurance, and Employee Assistance Plan (EAP)
  
  
• Healthcare and Dependent Care Flexible Spending Accounts (FSA)
  
  
• 401k with Employer Match
  
  
• Paid Time Off and Paid Holidays
  
  
• Voluntary Benefits: Critical Illness, Hospital Indemnity, Accident Insurance, Pet Insurance, Homeowners and Auto Insurance, Supplemental Term and Dependent Life and AD&D, and Legal Services
  
  
• Commuter Benefits
  
  
• And much more
  
  

To learn more about becoming part of the Diversified team, visit us at our career siteor email us at .

Diversified is an equal opportunity employer committed to fostering an inclusive and diverse workplace. All aspects of employment will be based on job requirements, individual qualifications, merit, performance, and business need. We do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected characteristic under applicable law. We believe in fair and equitable hiring practices and strive to create an environment where all individuals feel valued and empowered.

If you require a reasonable accommodation to participate in the application or interview process due to a disability, please contact so we can assist you.

Our compensation ranges reflect the cost of labor across several US geographic markets. The pay details below range from our lowest geographic market up to our highest geographic market. Pay is based on several factors including market location and may vary depending on job-related knowledge, skills and experience depending on the position offered, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits.

About Diversified:

Diversified is a global leader in audio visual and media innovation, recognized for designing and building the world's most experiential environments. Our award-winning team specializes in delivering solutions for the most complex, large-scale and immersive installations. Serving a global clientele that includes major media organizations and retailers, sports and live performance venues, corporate enterprises, and government agencies, Diversified partners with clients to create spaces that bring people together and keep them coming back.

What to Expect:

At Diversified, we're on a mission to create a world without boundaries, where technology enables all people to connect and experience the moments that matter, wherever they choose to be. With clients spanning the globe and an exciting pipeline of projects across industries, Diversified offers more than just a job. We offer a career path with the flexibility to grow personally and professionally, wherever your ambitions take you.

As a Diversified associate, you'll dive headfirst into big, complex, and rewarding projects that push the boundaries of what's possible. Plus, you'll enjoy a flexible work environment, competitive compensation and benefits, and a culture that celebrates diversity and inclusion.

IF YOU CAN DREAM IT, YOU CAN DO IT AT DIVERSIFIED.

Job Summary:

The installation technician is responsible for performing a wide variety of installation duties on technology projects for our clients. This position is the key field position for the bulk of the actual work that gets done in our clients buildings. The install tech needs to coordinate with project management, field superintendents and others to fully understand their role on specific projects. They interpret our drawing packages to create the basis of the finished systems. This installation can include displays, projectors, loudspeakers, microphones, equipment racks, etc. Will also provide advice and guidance to Associate Installation Technicians as necessary.

Primary Duties and Responsibilities:

• 
  
  
• Possess all skills from Associate Install Technician and most skills from the Associate Fabrication Technician job descriptions to install components and make modifications on site as necessary to complete the project
  
  
• Physical installation of a wide variety of technology into a wide variety of locations.
  
  
• Execute a wide variety of cabling terminations for all wire and connector types and ability to test completed terminations.
  
  
• Support the preparation of equipment racks for staging of equipment wire lacing including installation of power strips, grounding bars, jack-fields, etc.
  
  
• Able to read and understand functional design drawings as well as cable riser diagrams and all architectural drawings.
  
  
• Able to assist in the mounting of base build equipment such as monitor mounts, ceiling speakers' microphones and projectors.
  
  
• Provide a consistent level of technical performance as well as flexibility in work schedule. This position requires periodic overtime and may require regular overtime for extended periods to meet fabrication deadlines
  
  
• Able to complete assignments in accordance with or better than established task durations as well as estimate task durations to meet assigned deadlines. Provides daily feedback to Project Manager, or Site Superintendent.
  
  
• Able to build and wire custom designs from engineering drawings.
  
  
• Fiber optic cable handling, installation termination and testing.
  
  
• Can print and make minor corrections to cable labels.
  
  
• Maintain an organized work environment specifically orderliness and cleanliness of the shop and jobsites.
  
  
• Responsible for maintaining their toolkit, company vehicles and installation materials inventories. Keeping things clean, orderly and well documented.
  
  
• Responsible for maintaining their personal licenses, certifications and qualifications. (some states have specific requirement in this area)
  
  
• Maintain daily record of time worked on specific projects for timesheet entry and work performed reports
  
  

Complexity:

This level of technician will be responsible for performing tasks on clients job sites with little supervision. On smaller projects this position may be responsible for the coordination with clients, contractors and subcontractors.

Decision Making Authority:

This position is often alone on the job sites and requires making good judgement about decisions that need to be made. In general the project manager and a site supervisor are available to answer questions. This position requires good diplomacy in working with our clients and other key stakeholders on the job sites.

Physical Working Environment:

Physical Demands:

The physical demands described here are representative of those that may be met by an employee. The employee may be exposed to construction site conditions on a regular basis. Employee will be responsible for their safety while on job sites and to comply with all safety regulations in place by the GC. Use of PPE is usually required on job sites. The employee can typically spend at least 60% of their time on their feet and be required to mobile around the construction site. The employee must have the ability to occasionally climb ladders, use stairs and lift and/or move materials up to 40 pounds in construction areas. The individual is regularly required to use keyboards, test equipment and controls required for SI installation projects. Specific vision abilities required for this job include close vision, distance vision, peripheral vision and depth vision. When not on construction sites, the employee will experience normal office conditions and be required to use office equipment such as computers, peripherals, etc.

Travel:

Frequent travel by car and occasional airplane trips are required. Employee must possess a valid driver's license in their state of residence. Employee will be required to use their own vehicle and will be reimbursed for mileage at the current corporate rate. Local travel to job sites (within a 2 hour driving distance each way) will make up 70-90% usually but remote travel can be up to 30% of the job at times. 10% remote travel is required on a regular basis.

Job Qualifications:

Education/Certifications:

• 
  
  
• High school or GED equal
  
  
• AVIXA CTS Certification is desired.
  
  
• One or more years as an associate technician and/or fabrication technician or related industry experience.
  
  
• Must have a valid drivers license and adhere to our insurance requirements
  
  
• OSHA 30 Certificate is highly desired.
  
  
• Other relevant certifications may be required or preferred based on the technology focus of the position.
  
  
• Required/Desired Knowledge, Experience and Skills:
  
  
• Familiarity with a wide range of audio, video and networking equipment
  
  
• Knowledgeable of low voltage electrical concepts
  
  
• Possess basic carpentry and/or installation skills
  
  
• Proficient use and safety with power tools
  
  
• Good verbal communication skills and good customer service skills.
  
  
• Ability to diagnose, troubleshoot and resolve technical problems
  
  

What We Offer:

Along with competitive compensation, you will be eligible for the following benefits:

• 
  
  
• Multiple medical plan options to suit your family's needs
  
  
• Dental (including orthodontic coverage) and vision plans
  
  
• Company paid Basic Life, AD&D, Short-Term and Long-Term Disability Insurance, and Employee Assistance Plan (EAP)
  
  
• Healthcare and Dependent Care Flexible Spending Accounts (FSA)
  
  
• 401k with Employer Match
  
  
• Paid Time Off and Paid Holidays
  
  
• Voluntary Benefits: Critical Illness, Hospital Indemnity, Accident Insurance, Pet Insurance, Homeowners and Auto Insurance, Supplemental Term and Dependent Life and AD&D, and Legal Services
  
  
• Commuter Benefits
  
  
• And much more
  
  

To learn more about becoming part of the Diversified team, visit us at our career siteor email us at .

Diversified is an equal opportunity employer committed to fostering an inclusive and diverse workplace. All aspects of employment will be based on job requirements, individual qualifications, merit, performance, and business need. We do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected characteristic under applicable law. We believe in fair and equitable hiring practices and strive to create an environment where all individuals feel valued and empowered.

If you require a reasonable accommodation to participate in the application or interview process due to a disability, please contact so we can assist you.

Our compensation ranges reflect the cost of labor across several US geographic markets. The pay details below range from our lowest geographic market up to our highest geographic market. Pay is based on several factors including market location and may vary depending on job-related knowledge, skills and experience depending on the position offered, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits.

About Diversified:

Diversified is a global leader in audio visual and media innovation, recognized for designing and building the world's most experiential environments. Our award-winning team specializes in delivering solutions for the most complex, large-scale and immersive installations. Serving a global clientele that includes major media organizations and retailers, sports and live performance venues, corporate enterprises, and government agencies, Diversified partners with clients to create spaces that bring people together and keep them coming back.

What to Expect:

At Diversified, we're on a mission to create a world without boundaries, where technology enables all people to connect and experience the moments that matter, wherever they choose to be. With clients spanning the globe and an exciting pipeline of projects across industries, Diversified offers more than just a job. We offer a career path with the flexibility to grow personally and professionally, wherever your ambitions take you.

As a Diversified associate, you'll dive headfirst into big, complex, and rewarding projects that push the boundaries of what's possible. Plus, you'll enjoy a flexible work environment, competitive compensation and benefits, and a culture that celebrates diversity and inclusion.

IF YOU CAN DREAM IT, YOU CAN DO IT AT DIVERSIFIED.

How You'll Contribute:

The AV Installation and Support Services Technician is responsible for the installation, termination, testing, troubleshooting, and maintenance of low-voltage cabling systems, including voice, data, and video.

Assigned to Client and works full time from onsite location responsible for Installation and then maintaining the system after installation. Will conduct Preventive Maintenance and will assist with Service Tickets as needed. Will work with REMOTE support to troubleshoot Service Tickets as required.

This role ensures all work complies with industry standards and client requirements, with a focus on quality, safety, and efficiency. Technician will work onsite and will be responsible for preventive maintenance of the systems and will work with remote service technicians to address service tickets as needed.

What You'll Do:

• 
  
  
• Install, terminate, and test copper and fiber optic cabling for voice, data, and video systems.
  
  
• Interpret blueprints, floor plans, and wiring diagrams to determine cabling requirements and optimal routing.
  
  
• Perform troubleshooting and repairs on structured cabling systems and related hardware.
  
  
• Ensure all installations comply with relevant standards.
  
  
• Document all work performed, including test results and as-built drawings using BlueBeam.
  
  
• Collaborate with project managers, engineers, and other trades to ensure successful project completion.
  
  
• Maintain tools, equipment, and a safe, organized work environment.
  
  
• Provide technical support and guidance as needed.
  
  
• Participate in ongoing training to stay current with industry best practices and standards.
  
  
• Oversee all on-site activity on the active project job site and address any issues necessary to achieve quality and timeline standards
  
  
• Oversee all field operations and report progress, status and issues.
  
  
• Supervises the physical installation of a wide variety of technology into a wide variety of locations
  
  
• Maintains all quality control on jobsite, checking all work from subcontractors and union trades. Managing any discrepancies in our standards
  
  
• Able to read and understand functional design drawings and cable riser diagrams
  
  
• Able to complete assignments in accordance with or better than established task durations as well as estimate task durations to meet assigned deadlines. Provides daily feedback to Manager
  
  
• Able to build and wire custom panels from engineering drawings
  
  
• Advanced Fiber optic cable handling, installation termination and testing
  
  
• Responsible for tracking and maintaining toolkits, job material boxes, company vehicles and materials inventories. Keep clean, orderly and well documented
  
  
• Responsible for tracking and maintaining their personal licenses, certifications and qualifications. (Some states have specific requirements in this area)
  
  
• Maintain daily record of time worked on specific projects for timesheet entry. Maintain an activity log and a personnel log for skills to report on recommended improvements.
  
  
• Conduct routine Preventative Maintenance and logs as required.
  
  
• Work with Remote support for service tickets that require escalation.
  
  

Complexity:

This level of technician will be responsible for performing tasks on clients' jobsites with no supervision. This position is responsible for the coordination with clients, contractors and subcontractors. This position will be the key and only field technician in many situations and will be responsible for delegating work, working with remote support, and communicating with key stakeholders on behalf of the company. Requires maintaining quality control on all field work. This position requires the highest level of technical and people skills along with great communication skills.

Decision Making Authority:

This position is often alone on the job sites and requires making good judgement about decisions that need to be made. In general, the service manager, project manager and supervisor are available to answer questions, but this position is very independent and will be looked upon to make many onsite decisions on behalf of the service manager and company. This position requires good diplomacy in working with our clients and other key stakeholders on the job sites.

Physical Working Environment:

• 
  
  
• Work is performed in commercial, industrial, and construction environments.
  
  
• May require working in confined spaces, on ladders, lifts, or at heights.
  
  
• Must be able to lift and carry up to 50 lbs.
  
  
• Exposure to varying weather conditions and construction site hazards.
  
  

Physical Demands:

The physical demands described here are representative of those that may be met by an employee. The employee may be exposed to construction site conditions on a regular basis.

Employee will be responsible for their safety while on job sites and comply with all safety regulations in place by the client and Diversified. Use of PPE could be required on job sites. The employee can typically spend at least 60% of their time on their feet and be required to be mobile around the client site. The employee must have the ability to occasionally climb ladders, use stairs and lift and/or move materials up to 50 pounds in construction areas.

The individual is regularly required to use keyboards, test equipment and controls required for installation projects. Specific vision abilities required for this job include close vision, distance vision, peripheral vision and depth vision. When not on construction sites, the employee will experience normal office conditions and be required to use office equipment such as computers, peripherals, etc.

Travel:

Travel by car and occasional airplane trips are required. Employee must possess a valid driver's license in their state of residence. Employee must possess a valid Passport for entry onto client site. Employee will be required to use their own vehicle and will be reimbursed for mileage at the current corporate rate. Occasional travel by airplane for out-of-town projects is required.

Safety:

Maintain and wear appropriate PPE as the job and tasks require it.

Ensure hazards are addressed and rectified in a timely manner.

What You'll Bring:

Education & Certifications:

• 
  
  
• High school diploma or equivalent required.
  
  

• 
  
  
• Must possess the E06 Limited Energy Systems License
  
  

• 
  
  
• OSHA 30 Certificate required
  
  
• Must have a valid US Passport.
  
  
• Must have a valid driver's license and adhere to our insurance requirements
  
  

Required Skills/Qualifications:

• 
  
  
• Minimum 2 years of experience in low-voltage or structured cabling installation.
  
  
• Possess advanced AV installation skills
  
  
• Familiarity with a wide range of audio, video and networking equipment
  
  
• Proficient in the use of cable testers, hand tools, and power tools.
  
  
• Ability to read and interpret technical documents and blueprints.
  
  
• Must have knowledge of the following programs: Teams, Outlook, Excel, OneNote, BlueBeam/Adobe Reader
  
  
• Willingness to travel to job sites as required.
  
  
• Excellent troubleshooting and problem-solving skills.
  
  
• Strong communication and teamwork abilities.
  
  
• Good verbal communication skills and good customer service skills
  
  
• Ability to diagnose, troubleshoot and resolve technical problems
  
  
• Able to work indoors/outdoors, standing, sitting and ladder use. Able to lift 50lbs.
  
  

Preferred Skills/Qualifications:

• 
  
  
• Experience with Service Now preferred.
  
  
• Experience with Software House preferred.
  
  

• 
  
  
• AVIXA CTS Certification is preferred.
  
  

• 
  
  
• AVIXA CTS-I Certification is highly encouraged
  
  

• 
  
  
• Installer (Level 1 or 2), Technician, or equivalent structured cabling certification preferred.
  
  
• Additional certifications from recognized structured cabling governing bodies are a plus.
  
  

Other relevant certifications may be required or preferred based on the technology focus of the position

What We Offer:

Along with competitive compensation, you will be eligible for the following benefits:

• 
  
  
• Multiple medical plan options to suit your family's needs
  
  
• Dental (including orthodontic coverage) and vision plans
  
  
• Company paid Basic Life, AD&D, Short-Term and Long-Term Disability Insurance, and Employee Assistance Plan (EAP)
  
  
• Healthcare and Dependent Care Flexible Spending Accounts (FSA)
  
  
• 401k with Employer Match
  
  
• Paid Time Off and Paid Holidays
  
  
• Voluntary Benefits: Critical Illness, Hospital Indemnity, Accident Insurance, Pet Insurance, Homeowners and Auto Insurance, Supplemental Term and Dependent Life and AD&D, and Legal Services
  
  
• Commuter Benefits
  
  
• And much more
  
  

To learn more about becoming part of the Diversified team, visit us at our career siteor email us at .

Diversified is an equal opportunity employer committed to fostering an inclusive and diverse workplace. All aspects of employment will be based on job requirements, individual qualifications, merit, performance, and business need. We do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected characteristic under applicable law. We believe in fair and equitable hiring practices and strive to create an environment where all individuals feel valued and empowered.

If you require a reasonable accommodation to participate in the application or interview process due to a disability, please contact so we can assist you.

Our compensation ranges reflect the cost of labor across several US geographic markets. The pay details below range from our lowest geographic market up to our highest geographic market. Pay is based on several factors including market location and may vary depending on job-related knowledge, skills and experience depending on the position offered, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

As a Industrial Maintenance Electrician you will be a vital part of our manufacturing team installing, maintaining electrical equipment. Operate, install electrical systems and preform functional of building and plant equipment.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities:

• Operate, install electrical systems and perform functional testing of building and plant equipment (e.g., machines, motor controls, room re-models)

• Determine if system should be shut down or work must be performed with power source on

• Lock out, tag out, try out equipment and related systems

• Perform primary and secondary testing on electrical breakers during routine maintenance; replace, update and retro fit breakers

• Perform routine tests on high voltage switches and relays, using hi-potential test equipment (Hipot), replace switch or relay

• Troubleshoot electric motors using appropriate test equipment

• Monitor current, voltage, amperage, frequency and watts hours at sub-stations using online computing system

• Check and service electrical systems, using infrared analysis sheets to locate hot spots in service panel

• Service and maintain electrical systems on various types of overhead cranes

• Operate, install electrical systems and perform functional test of building and plant equipment (e.g., machines, motor controls, room re-models)

• Install and perform routine maintenance on all types of lighting fixtures (e.g., fluorescent, halide, standard); clean and check sockets, and replace ballast and bulbs

• Run high voltage electrical cable from sub-station to unit station; cut and splice cable, test cable for resistance

• Install, replace and repair fiber optic cable for computers and computing systems

• Bend conduit and install junction boxes; pull wire of various gauge and color through conduit using a fish tape; install and connect switches and outlets

• Check work after completion or after each operation; ensure job is per drawing and WAC, NEC codes; evaluate job for work to be performed (e.g., wire size, electrical load, conduit)

• Operate mechanical lifts of various types (e.g. tiger lift, spider lift, snorkel lift), to access work areas

• Install wire, crimp, terminate, and solder using tools (e.g., crimpers, wire cutters, soldering gun) in plant electrical systems

• Establish/verify voltage, amperage, frequency and watts using test equipment (e.g., circuit trackers, sonic circuit chasers, volt, amperage meters)

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• 3+ years of experience as an Electrician or Apprentice.

• 1+ years of experience maintaining industrial equipment.

• Experience working from heights and using fall protection equipment with weight limitations .

• Must be able to lift, push and pull up to 35 pounds frequently within an 8 hour shift.

• Must be able to complete fall protection training.

Preferred Qualifications:

• Electrician license (EL01 &/or EL 07) or an electrical card.

• Crane related experience.

• Experience with prime power.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidate must live in the immediate are or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for all shifts

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary pay range: $33.32 per hour – $61.01 per hour

Applications for this position will be accepted until May. 29, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

The Installation Technician is responsible for the successful installation of equipment in an efficient and consistent manner, while working with a team to achieve a common goal of timely project completion. KHI is dedicated to satisfying the objectives of the client and KHI together. All efforts are made to keep the focus on accomplishing tasks while developing personal friendly and polite relationships with clients.

Client goal: Complete the job on time, with quality work, and under budget. KHI goals: Complete the job in a safe manner. Complete the job with no/minimal re-work.

• Can be trusted to work without supervision.
• Ability to work with clients and develop friendly relationships.
• Sufficient attention-to-detail to make our products/services better than our competition.
• Dedicated to doing things right (for long term) the first time rather than hoping the client doesn't find out about mistakes.
• Understand ethical behavior and business practices, and ensure that own behavior and the behavior of others is consistent with these standards and aligns with the values of the organization.
• Creativity/Innovation: Develop new and unique ways to improve operations of the organization and to create new opportunities.
• Make Decisions: Assess situations to determine the importance, urgency and risks, and make clear decisions which are timely and in the best interests of the organization.

• Install operating room lights, equipment booms, cabinetry, among other structures.
• Pull, install, cable (CAT 5/6), medical gas lines, and other cabling.
• Provide reports for clients, validating test results and work performed.
• Learn client specific systems, enabling client growth and full integration.
• Install and mount video monitors.
• Proficient in cable management.
• Basic general contracting skills.

• Ability to travel overnight 80% or more of the time.
• Knowledge of electrical, and low voltage systems.
• Ability to read plans and follow the scope of work, installing all equipment to specifications.
• Ability to assess changes in the scope of work and appropriately request a change order.
• Need to be able to use a level, wrench, reciprocating saw, portable hand saw, or hammer drill to install equipment.
• Installation Technicians work a standard work week but may be required to work evenings and weekends to meet project milestones. (Nationwide)
• Ability to work in a crouched or kneeling position and in confined spaces.
• Preferred certifications, such as OSHA 10.
• Ability to lift 70+ pounds.

• Stays on task throughout the day without supervision.
• Moves onto subsequent tasks with good communication and little/no supervision.

• Listens well and adheres to PM direction.
• Speaks up to ensure proper understanding.
• Strong verbal and written communication skills, with the ability to communicate with clients and situations in a professional, proactive and productive manner.
• Communicate Effectively: Speak, listen and write in a clear, thorough and timely manner using appropriate and effective communication tools and techniques.

• Able to prioritize while solving problems:
  • Client & KHI goals
  • Trust, work with clients, Attention to detail, doing things correctly.
  • Assess problem situations to identify causes, gather and process relevant information, generate possible solutions, and make recommendations and/or resolve the problem.

• Able to work with KHI PM's and leadership professionally.
• Able to work with clients in professional and friendly manner.
• Able to relate to facility workers and patients with respect.

• Organize their personal habits to be ready to work on-time, every time.

• Handle their personal issues to not interfere with normal working hours.
• Be prepared prior to work to complete jobs with no rework and minimal non-productive time.
• Complete jobs in proper sequence.

• Adheres to OSHA and KHI standards without fail.
• Willing to help others adhere to OSHA and KHI standards.
• Stops jobs before they become unsafe rather than waiting until the last second.

• $18 $23 per hour Starting, based on experience.
• Benefits include Medical and 401K retirement plan.

Bath Concepts Independent Dealers is a trusted, locally operated remodeling company known for delivering stylish, low-maintenance, and cost-effective bath, roofing, siding, and window solutions to homeowners, commercial clients, and customers with accessibility needs. Backed by years of experience and a commitment to excellence, we've earned an exceptional reputation for quality craftsmanship in acrylic bath and shower systemsand we bring that same standard to every product we offer.

About the Role: We're looking for an experienced Installation Manager to lead our installation teams. This is a full-time, hands-on leadership role ideal for someone with a background in construction, installation, and quality control who's ready to manage a dynamic team and ensure exceptional customer experiences from start to finish.

Key Responsibilities:

• Oversee and schedule all bath system installations
• Lead and support installation crews, ensuring timely, high-quality workmanship
• Review customer contracts and coordinate product orders
• Manage warehouse inventory and vendor relationships
• Ensure full customer satisfaction and follow-up after installations
• Conduct regular check-ins with clients and request referrals
• Handle all permitting, documentation, and CRM updates
• Support installers with on-site issues and service calls
• Analyze job costs and service trends for continuous improvement
• Assist in hiring, onboarding, and training of installation staff
• Manage calendars for installation scheduling and time-off requests
• Maintain accurate records of timesheets, receipts, and job completions

What We're Looking For:

• 5+ years of installation or construction experience
• Background in acrylic bath systems
• Plumbing knowledge (highly preferred)
• Proven leadership and team management skills
• Quality assurance and customer service experience
• Valid driver's license and clean driving record

Compensation & Benefits:

• Competitive salary commensurate with experience
• Supportive and professional work environment
• Opportunity for long-term career growth with a growing company

Join Us! If you're ready to take the next step in your career with a company that values quality, integrity, and customer satisfaction, we'd love to hear from you!