Arch Linux Install Guide 2026 Jobs in Usa

ESSENTIAL DUTIES AND RESPONSIBILITIES

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.

• Timely and proper inspection, repair, maintenance, and installation of customer equipment in a manner that exceeds customer expectations and that is consistent with Rite-Hite's image as the industry leader in customer service.

• Develop and maintain good customer relations in a manner that exemplifies Rite-Hite's image and commitment to customer service.

• Compliance with all company policies and safety guidelines.

• Perform installation, inspection, and repair of equipment in the field in an expeditious manner while assuring the customer's needs are met and exceeded. This is mainly accomplished individually but may sometimes be accomplished in small teams.

• As skills and knowledge develop, guide other Service Technicians with less skills/knowledge through complex problems in the field. This may include training other Service Technicians in the proper field installation, service and repair of equipment and proper administrative procedures instilling Rite-Hite's commitment to customer service.

• Using the handheld devices (or paper backup forms if needed) accurately complete all necessary paperwork associated with field service, repair, and installation, including service tickets, timesheets, open job tracking form and safety analysis sheets.

• Maintain compliance with operation and communication standards as per the Field Service Technician Handbook.

• This position requires the operation of a service vehicle in compliance with DOT Driver Qualification standards, as well as truck-based cranes, forklifts, welders, torches, and power and hand tools.

• Follow all customer-specific requirements, policies, safety guidelines and directions on their work sites.

• Work closely with all other departments in the company, communicating and coordinating activities to efficiently maximize customer satisfaction.

• "Occasional (under 20% annually) domestic overnight travel may be required for training, supporting customers at other offices, etc. may be required."

• Other duties may be assigned.

The pay range for this position is $20-35. We take geographic differentials into consideration in areas of higher cost of living. We offer nine paid holidays (New Year's Day, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Day After Thanksgiving, Christmas Eve, Christmas Day and New Year's Eve). New employees are eligible for up to two weeks of vacation (pro-rated based on hire date within 1st year of employment). We offer additional paid time off based on tenure. Based on time in the job, you will be eligible for additional PTO (vacation, sick leave, etc.). We offer 72 hours PTO (1 hour for every 40 worked) to employees in Colorado.

EDUCATION and/or EXPERIENCE

The successful individual will possess:

• High school diploma or general education degree (GED); and

• One to five year's experience in repair and service of hydraulic, mechanical, and electrical equipment

KNOWLEDGE / SKILL REQUIREMENTS

The ideal individual will demonstrate:

• Service Technicians must have a valid drivers license

• Passing DOT medical exam

• Applicable driver qualification standards at all times.

• Ability to read and interpret documents such as safety rules, blueprints & schematics, operating and maintenance instructions, and procedure manuals.

• Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.

• Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.

• Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.

SUPERVISORY RESPONSIBILITIES:

This role will not have supervisory responsibilities.

Arbon Equipment - A Rite-Hite Company is the global leader in the manufacture and distribution of industrial loading dock and door equipment. Our innovative products and world class sales organization ensure solid, consistent growth, both for our company and our staff. We are always looking ahead to develop innovative new products and services to improve our customers' safety, security, and productivity.

Arbon Equipment - A Rite-Hite Company provides competitive compensation and a comprehensive benefits package with medical, dental, and vision coverage along with life and paid medical leave. We also provide a retirement savings plan that combines 401(K) with company match and profit sharing. Paid holidays, vacation, and up to five paid personal/sick days per year round out the package.

Rite-Hite is an Equal Opportunity/Affirmative Action employer offering a drug free workplace for our customers and employees.

Title: Equipment Installation Mechanical Technician IV - 3 Openings

Location: Newton, NC

Duration: 12 Months

Hours: Monday - Friday 8 AM - 5 PM, Occasional OT

Travel Requirements: Project locations will range from Newton, NC and Hickory, NC

Only W2 candidates are eligible for this position. Third-party or C2C candidates will not be considered.

Scope of Position:

The Lead Equipment Installation Mechanical Technician is a senior-level technical role responsible for leading and executing complex mechanical equipment installations. This position provides on-site leadership, technical expertise, and coordination for installation projects, ensuring work is completed safely, on schedule, and in compliance with engineering specifications, quality standards, and customer requirements. The Lead Technician serves as a subject matter expert and mentor to junior technicians.

• This position is in the Engineering Project and is focused on capacity additions and the associated line installations & debug from a mechanical perspective.

• Lead and/or participate on manufacturing engineering projects and lead/support teams for the purposes of capacity installations, equipment debug, and preparing line/associated parts for Operations Receivership.

• As a leading team member, provide advanced mechanical discipline to proactively identify technical problems through root cause understanding coupled with robust industrialized solutions relative to line debug and installs.

• Leverage knowledge of mechanical and electrical engineering, machining & designing processes to improve performance of equipment/manufacturing process.

• Lead/support the development and execution of project plans to deliver timely error-free mechanical support for multi-line equipment installations

• Experienced with working along-side vendors and suppliers to resolve technical issues to protect scope, timing, and cost metrics.

• Ability to work, collaborate, cooperate, and utilize Best Practice across various functional groups on a daily basis to accomplish goals

•Interpret and work from detailed engineering drawings, schematics, blueprints, and installation manuals.

•Perform advanced mechanical tasks including rigging, leveling, precision alignment, torqueing, piping, and mechanical integration.

•Troubleshoot and resolve installation issues, equipment malfunctions, and mechanical interferences.

•Verify installations meet OEM specifications, safety codes, and quality standards.

Leadership & Coordination

• Act as on-site Lead Technician, directing daily activities of installation crews and subcontractors.

• Assign tasks, monitor progress, and ensure efficient use of labor and resources.

• Mentor and train junior technicians, providing hands-on guidance and technical instruction.

• Serve as the primary technical point of contact between field teams, engineers, project managers, and customers.

Quality & Documentation

• Conduct inspections and quality checks throughout the installation process.

• Complete installation reports, checklists, punch lists, and as-built documentation.

• Support equipment testing, startup, and customer acceptance activities.

Project Support

• Assist with installation planning, sequencing, and scheduling.

• Coordinate material handling, tools, and equipment needed for installations.

• Support continuous improvement initiatives and best practices in installation methods.

Day-to-Day Responsibilities:

• Maintain safe work practices, inform others of hazardous conditions or personal practices as expressed on project team.

• Manage and lead installation and debugging activities to meet milestone & timeline objectives for successful capacity adds.

• Design & implement mechanical solutions and process changes to improve capability of manufacturing equipment.

• Lead in or solve mechanical and process issues through data analysis, experience, and collaboration with subject matter experts

• Manage spare part identification and storeroom entry as recommended by suppliers or peer engineers, noting available spares within (2)-plant footprint.

• Develop and update engineering and operations documentation.

• Support training for the operations workforce regarding equipment or operations changes

• Perform advanced troubleshooting, diagnosis, and repair of mechanical systems, equipment, and machinery (e.g., pumps, motors, conveyors, hydraulics, pneumatics, etc.).

• Align, test, and calibrate mechanical systems after installation.

• Diagnose complex mechanical failures and recommend effective solutions.

• Interpret blueprints, schematics, and technical manuals to support troubleshooting and repair activities.

• Identify opportunities to improve equipment reliability, efficiency, and safety.

• Collaborate with other departments to implement process improvements.

Qualifications

Required Education:

• Associate's degree

• A high school degree will be considered with significant hands-on experience

Required Years and Area of Experience:

• 3+ years’ experience in new equipment installations in a manufacturing environment, start-up experiences a plus

• Experience in a fast-paced, changing environment with multiple priorities

• Strong knowledge of mechanical systems, industrial equipment, and installation techniques.

• Proven ability to read and interpret engineering drawings and technical documentation.

• Experience leading crews in industrial, manufacturing, semiconductor, energy, or similar environments.

Required Skills:

• Ability to learn new technology and processes quickly

• Strong technical fundamentals with mechanical engineering skills

• Ability to multitask and prioritize work on an independent basis in a fast-paced project install manufacturing environment.

• Proficient with PC software, including Microsoft Office Suite

• Strong communication skills

• Expertise in mechanical systems such as hydraulics, pneumatics, bearings, gear systems, and conveyor systems.

• Ability to read and interpret technical drawings, blueprints, and schematics.

• Proficiency in using hand tools, power tools, and diagnostic equipment.

• Strong problem-solving, analytical, and critical-thinking skills.

• Knowledge of safety regulations and practices in an industrial setting.

• Basic computer skills for maintaining records and using CMMS (Computerized Maintenance Management Systems).

Certifications:

• Mechatronics trades highly desired

• Relevant mechanical or industrial certifications (e.g., Millwright, HVAC, or Welding) are a plus.

• OSHA or other safety certifications may be required.

Desired Skills:

• Hands-on experience in commercial manufacturing equipment

• Project leadership/management experience (including milestone management and financial ownership)

• Experience in vendor/supplier management on-site/off-site

• Experience with CAD

• SAP, Maximo, Maintenance Leadership

• Detail-oriented and able to perform with limited supervision.

Soft Skills:

• Leadership experience in technical project management

• Ability to work & effectively collaborate within a team

• Ability to allocate/supervise resources to accomplish aggressive project milestones & timeline within specification and costs.

• Able to shift tasks quickly

• Able to prioritize and multitask

• Communicate effectively both verbal and written

Hours of work/work schedule/flex-time:

• 40 hrs. (overtime expected). Due to the project timing; overtime and periodic off-hours coverage may be necessary to successfully complete workload and interact with other team personnel.

Join our dynamic team as an HVAC Install Foreman, where you'll lead and inspire a skilled crew in executing top-quality HVAC installations. In this pivotal role, you will ensure projects are completed efficiently, safely, and to the highest standards, while fostering a collaborative and supportive work environment.

Job Responsibilities

- Lead and supervise HVAC installation teams to ensure projects are completed on time and within budget.

- Review project plans and blueprints to ensure proper installation procedures.

- Coordinate with project managers and other trades to ensure seamless project execution.

- Inspect and test HVAC systems and components to verify proper installation and performance.

- Train and mentor team members on installation techniques and safety procedures.

- Ensure compliance with all safety standards and regulations on job sites.

- Maintain accurate records of installations, including progress reports and material usage.

- Order and manage inventory of materials and supplies needed for installations.

- Troubleshoot and resolve any issues or challenges during the installation process.

- Communicate effectively with clients to ensure satisfaction and address any concerns.

- Conduct regular site inspections to ensure quality control and adherence to industry standards.

- Oversee the maintenance and care of tools, equipment, and vehicles used by the installation team.

Job Requirements

- High school diploma or equivalent.

- Minimum of 5 years of experience in HVAC installation - Retrofit and RNC. 

- Proven experience in a supervisory or foreman role.

- Strong knowledge of HVAC systems, components, and installation techniques.

- Ability to read and interpret blueprints, schematics, and technical drawings.

- Proficiency in using HVAC tools and equipment.

- Excellent leadership and team management skills.

- Strong communication and interpersonal abilities.

- Ability to troubleshoot and resolve installation issues efficiently.

- Commitment to safety standards and regulations.

- Valid driver’s license and reliable transportation.

- Relevant HVAC certifications (e.g., EPA 608 Certification) preferred.

- Ability to work in various environmental conditions.

- Strong organizational and time management skills.

- Willingness to travel to different job sites as needed.

Pay is based upon perfromance.

Compensation details: 6 Yearly Salary

PI3a9e04c6e9fd-31181-39851157

About Diversified:

Diversified is a global leader in audio visual and media innovation, recognized for designing and building the world's most experiential environments. Our award-winning team specializes in delivering solutions for the most complex, large-scale and immersive installations. Serving a global clientele that includes major media organizations and retailers, sports and live performance venues, corporate enterprises, and government agencies, Diversified partners with clients to create spaces that bring people together and keep them coming back.

What to Expect:

At Diversified, we're on a mission to create a world without boundaries, where technology enables all people to connect and experience the moments that matter, wherever they choose to be. With clients spanning the globe and an exciting pipeline of projects across industries, Diversified offers more than just a job. We offer a career path with the flexibility to grow personally and professionally, wherever your ambitions take you.

As a Diversified associate, you'll dive headfirst into big, complex, and rewarding projects that push the boundaries of what's possible. Plus, you'll enjoy a flexible work environment, competitive compensation and benefits, and a culture that celebrates diversity and inclusion.

IF YOU CAN DREAM IT, YOU CAN DO IT AT DIVERSIFIED.

How You'll Contribute:

The installation technician is responsible for performing a wide variety of installation duties on technology projects for our clients. This position is the key field position for the bulk of the actual work that gets done in our clients buildings. The install tech needs to coordinate with project management, field superintendents and others to fully understand their role on specific projects. They interpret our drawing packages to create the basis of the finished systems. This installation can include displays, projectors, loudspeakers, microphones, equipment racks, etc. Will also provide advice and guidance to Associate Installation Technicians as necessary.

Location: Must live in the Washington DC - VA area.

What You'll Do:

• 
  
  
• Perform structured cabling installation: pull, terminate, label, and dress cables per project documentation and standards.
  
  
• Complete physical installation and wiring of AV devices (displays, speakers, microphones, cameras, control interfaces, etc.).
  
  
• Assemble, populate, and dress equipment racks with a high degree of workmanship and adherence to design documents.
  
  
• Solder and terminate connectors according to project specifications and accepted industry practices.
  
  
• Execute light physical construction tasks as required (e.g., blocking, mounting surfaces, hardware installation).
  
  
• Follow Diversified's installation procedures, quality guidelines, and safety protocols with minimal deviation.
  
  
• Maintain accurate daily records: timesheets, daily field reports, checklists, and as-built documentation.
  
  
• Collaborate effectively with Project Managers, Engineers, and Lead Technicians to ensure project milestones are met.
  
  
• Represent Diversified professionally on active job sites, including client and construction environments.
  
  
• Actively participate in ongoing training and skill development toward advancing technical proficiency.
  
  

Complexity:

This level of technician will be responsible for performing tasks on clients job sites with little supervision. On smaller projects this position may be responsible for the coordination with clients, contractors and subcontractors.

Decision Making Authority:

This position is often alone on the job sites and requires making good judgement about decisions that need to be made. In general the project manager and a site supervisor are available to answer questions. This position requires good diplomacy in working with our clients and other key stakeholders on the job sites.

Physical Working Environment:

Physical Demands:

The physical demands described here are representative of those that may be met by an employee. The employee may be exposed to construction site conditions on a regular basis. Employee will be responsible for their safety while on job sites and to comply with all safety regulations in place by the GC. Use of PPE is usually required on job sites. The employee can typically spend at least 60% of their time on their feet and be required to mobile around the construction site. The employee must have the ability to occasionally climb ladders, use stairs and lift and/or move materials up to 40 pounds in construction areas. The individual is regularly required to use keyboards, test equipment and controls required for SI installation projects. Specific vision abilities required for this job include close vision, distance vision, peripheral vision and depth vision. When not on construction sites, the employee will experience normal office conditions and be required to use office equipment such as computers, peripherals, etc.

Travel:

Frequent travel by car and occasional airplane trips are required. Employee must possess a valid driver's license in their state of residence. Employee will be required to use their own vehicle and will be reimbursed for mileage at the current corporate rate. Local travel to job sites (within a 2 hour driving distance each way) will make up 70-90% usually but remote travel can be up to 30% of the job at times. 10% remote travel is required on a regular basis.

What You'll Bring:

Education/ Certifications:

* High school or GED equal
* AVIXA CTS Certification is desired.
* Must have a valid drivers license and adhere to our insurance requirements
* OSHA 30 Certificate is highly desired. (NYC OSHA30 is desired)
* Other relevant certifications may be required or preferred based on the technology focus of the position.

Required Skills/Qualifications:

• 
  
  
• 1+ years as an associate technician and/or fabrication technician or related industry experience.
  
  
• Proven ability to perform core AV installation tasks with minimal direct instruction.
  
  
• Competency with hand tools, power tools, and installation materials required for AV integration.
  
  
• Strong understanding of cabling types, termination techniques, and device mounting requirements.
  
  
• Ability to interpret functional design drawings, cable riser diagrams, and architectural drawings.
  
  
• Comfortable working on ladders, lifts, and in construction environments.
  
  
• Strong work ethic, attention to detail, and commitment to quality workmanship.
  
  
• Effective communication skills and ability to collaborate within a project team.
  
  
• Flexibility and adaptability to evolving site conditions and project priorities.
  
  

What We Offer:

Along with competitive compensation, you will be eligible for the following benefits:

• 
  
  
• Multiple medical plan options to suit your family's needs
  
  
• Dental (including orthodontic coverage) and vision plans
  
  
• Company paid Basic Life, AD&D, Short-Term and Long-Term Disability Insurance, and Employee Assistance Plan (EAP)
  
  
• Healthcare and Dependent Care Flexible Spending Accounts (FSA)
  
  
• 401k with Employer Match
  
  
• Paid Time Off and Paid Holidays
  
  
• Voluntary Benefits: Critical Illness, Hospital Indemnity, Accident Insurance, Pet Insurance, Homeowners and Auto Insurance, Supplemental Term and Dependent Life and AD&D, and Legal Services
  
  
• Commuter Benefits
  
  
• And much more
  
  

To learn more about becoming part of the Diversified team, visit us at our career siteor email us at .

Diversified is an equal opportunity employer committed to fostering an inclusive and diverse workplace. All aspects of employment will be based on job requirements, individual qualifications, merit, performance, and business need. We do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected characteristic under applicable law. We believe in fair and equitable hiring practices and strive to create an environment where all individuals feel valued and empowered.

If you require a reasonable accommodation to participate in the application or interview process due to a disability, please contact so we can assist you.

Our compensation ranges reflect the cost of labor across several US geographic markets. The pay details below range from our lowest geographic market up to our highest geographic market. Pay is based on several factors including market location and may vary depending on job-related knowledge, skills and experience depending on the position offered, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits.

About Diversified:

Diversified is a global leader in audio visual and media innovation, recognized for designing and building the world's most experiential environments. Our award-winning team specializes in delivering solutions for the most complex, large-scale and immersive installations. Serving a global clientele that includes major media organizations and retailers, sports and live performance venues, corporate enterprises, and government agencies, Diversified partners with clients to create spaces that bring people together and keep them coming back.

What to Expect:

At Diversified, we're on a mission to create a world without boundaries, where technology enables all people to connect and experience the moments that matter, wherever they choose to be. With clients spanning the globe and an exciting pipeline of projects across industries, Diversified offers more than just a job. We offer a career path with the flexibility to grow personally and professionally, wherever your ambitions take you.

As a Diversified associate, you'll dive headfirst into big, complex, and rewarding projects that push the boundaries of what's possible. Plus, you'll enjoy a flexible work environment, competitive compensation and benefits, and a culture that celebrates diversity and inclusion.

IF YOU CAN DREAM IT, YOU CAN DO IT AT DIVERSIFIED.

Job Summary:

The installation technician is responsible for performing a wide variety of installation duties on technology projects for our clients. This position is the key field position for the bulk of the actual work that gets done in our clients buildings. The install tech needs to coordinate with project management, field superintendents and others to fully understand their role on specific projects. They interpret our drawing packages to create the basis of the finished systems. This installation can include displays, projectors, loudspeakers, microphones, equipment racks, etc. Will also provide advice and guidance to Associate Installation Technicians as necessary.

Primary Duties and Responsibilities:

• 
  
  
• Possess all skills from Associate Install Technician and most skills from the Associate Fabrication Technician job descriptions to install components and make modifications on site as necessary to complete the project
  
  
• Physical installation of a wide variety of technology into a wide variety of locations.
  
  
• Execute a wide variety of cabling terminations for all wire and connector types and ability to test completed terminations.
  
  
• Support the preparation of equipment racks for staging of equipment wire lacing including installation of power strips, grounding bars, jack-fields, etc.
  
  
• Able to read and understand functional design drawings as well as cable riser diagrams and all architectural drawings.
  
  
• Able to assist in the mounting of base build equipment such as monitor mounts, ceiling speakers' microphones and projectors.
  
  
• Provide a consistent level of technical performance as well as flexibility in work schedule. This position requires periodic overtime and may require regular overtime for extended periods to meet fabrication deadlines
  
  
• Able to complete assignments in accordance with or better than established task durations as well as estimate task durations to meet assigned deadlines. Provides daily feedback to Project Manager, or Site Superintendent.
  
  
• Able to build and wire custom designs from engineering drawings.
  
  
• Fiber optic cable handling, installation termination and testing.
  
  
• Can print and make minor corrections to cable labels.
  
  
• Maintain an organized work environment specifically orderliness and cleanliness of the shop and jobsites.
  
  
• Responsible for maintaining their toolkit, company vehicles and installation materials inventories. Keeping things clean, orderly and well documented.
  
  
• Responsible for maintaining their personal licenses, certifications and qualifications. (some states have specific requirement in this area)
  
  
• Maintain daily record of time worked on specific projects for timesheet entry and work performed reports
  
  

Complexity:

This level of technician will be responsible for performing tasks on clients job sites with little supervision. On smaller projects this position may be responsible for the coordination with clients, contractors and subcontractors.

Decision Making Authority:

This position is often alone on the job sites and requires making good judgement about decisions that need to be made. In general the project manager and a site supervisor are available to answer questions. This position requires good diplomacy in working with our clients and other key stakeholders on the job sites.

Physical Working Environment:

Physical Demands:

The physical demands described here are representative of those that may be met by an employee. The employee may be exposed to construction site conditions on a regular basis. Employee will be responsible for their safety while on job sites and to comply with all safety regulations in place by the GC. Use of PPE is usually required on job sites. The employee can typically spend at least 60% of their time on their feet and be required to mobile around the construction site. The employee must have the ability to occasionally climb ladders, use stairs and lift and/or move materials up to 40 pounds in construction areas. The individual is regularly required to use keyboards, test equipment and controls required for SI installation projects. Specific vision abilities required for this job include close vision, distance vision, peripheral vision and depth vision. When not on construction sites, the employee will experience normal office conditions and be required to use office equipment such as computers, peripherals, etc.

Travel:

Frequent travel by car and occasional airplane trips are required. Employee must possess a valid driver's license in their state of residence. Employee will be required to use their own vehicle and will be reimbursed for mileage at the current corporate rate. Local travel to job sites (within a 2 hour driving distance each way) will make up 70-90% usually but remote travel can be up to 30% of the job at times. 10% remote travel is required on a regular basis.

Job Qualifications:

Education/Certifications:

• 
  
  
• High school or GED equal
  
  
• AVIXA CTS Certification is desired.
  
  
• One or more years as an associate technician and/or fabrication technician or related industry experience.
  
  
• Must have a valid drivers license and adhere to our insurance requirements
  
  
• OSHA 30 Certificate is highly desired.
  
  
• Other relevant certifications may be required or preferred based on the technology focus of the position.
  
  
• Required/Desired Knowledge, Experience and Skills:
  
  
• Familiarity with a wide range of audio, video and networking equipment
  
  
• Knowledgeable of low voltage electrical concepts
  
  
• Possess basic carpentry and/or installation skills
  
  
• Proficient use and safety with power tools
  
  
• Good verbal communication skills and good customer service skills.
  
  
• Ability to diagnose, troubleshoot and resolve technical problems
  
  

What We Offer:

Along with competitive compensation, you will be eligible for the following benefits:

• 
  
  
• Multiple medical plan options to suit your family's needs
  
  
• Dental (including orthodontic coverage) and vision plans
  
  
• Company paid Basic Life, AD&D, Short-Term and Long-Term Disability Insurance, and Employee Assistance Plan (EAP)
  
  
• Healthcare and Dependent Care Flexible Spending Accounts (FSA)
  
  
• 401k with Employer Match
  
  
• Paid Time Off and Paid Holidays
  
  
• Voluntary Benefits: Critical Illness, Hospital Indemnity, Accident Insurance, Pet Insurance, Homeowners and Auto Insurance, Supplemental Term and Dependent Life and AD&D, and Legal Services
  
  
• Commuter Benefits
  
  
• And much more
  
  

To learn more about becoming part of the Diversified team, visit us at our career siteor email us at .

Diversified is an equal opportunity employer committed to fostering an inclusive and diverse workplace. All aspects of employment will be based on job requirements, individual qualifications, merit, performance, and business need. We do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected characteristic under applicable law. We believe in fair and equitable hiring practices and strive to create an environment where all individuals feel valued and empowered.

If you require a reasonable accommodation to participate in the application or interview process due to a disability, please contact so we can assist you.

Our compensation ranges reflect the cost of labor across several US geographic markets. The pay details below range from our lowest geographic market up to our highest geographic market. Pay is based on several factors including market location and may vary depending on job-related knowledge, skills and experience depending on the position offered, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits.

Manager - Electrical Installation Manager

Location: Nationwide Travel Required

Job Type: Direct Hire

Location: Cincinnati, OH; Charlotte, NC; Atlanta, GA

Overview

We are seeking an experienced Electrical Installation Manager to lead electrical field teams delivering complex automation and material handling installations across customer sites nationwide.

This role oversees the electrical installation of conveyor systems, robotics, and warehouse automation equipment, ensuring projects are completed safely, efficiently, and to high quality standards. The position works closely with mechanical installation teams, controls engineers, and project managers to ensure successful project execution.

What You’ll Be Responsible For

• Leading and developing electrical installers, foremen, and subcontractors across multiple projects
• Overseeing electrical installation for conveyor systems, material handling equipment, robotics, and automation systems
• Reviewing electrical drawings, schematics, and installation scope prior to project kickoff
• Ensuring compliance with NEC, OSHA, and customer standards
• Supporting system startup, troubleshooting, and commissioning activities
• Planning labor needs and deploying crews across active installations
• Coordinating work with mechanical installation teams, controls engineers, and project leadership
• Identifying site risks early and implementing corrective actions to maintain schedule and quality

What We’re Looking For

• 10+ years of industrial electrical installation experience within material handling, automation, conveyor systems, or similar environments
• 5+ years leading electrical field teams, foremen, or subcontractors
• Experience installing electrical infrastructure for automation systems, including motor controls, VFDs, sensors, safety systems, and industrial control panels
• Experience coordinating with mechanical installation teams, controls engineers, and project managers on complex installations
• Ability to manage labor planning, crew deployment, and installation schedules across multiple sites

What Success Looks Like

• Safe, high-quality installations with minimal rework
• Projects delivered on schedule with efficient labor utilization
• Strong field leadership and well-developed electrical teams
• Consistent installation standards across projects
• Positive collaboration with engineering, installation, and project teams

Ideal Background

This role is well suited for an experienced electrical leader coming from material handling, warehouse automation, conveyor systems, industrial installation, or large-scale facility buildouts who enjoys leading field teams and delivering complex projects.

Inter Technologies Corporation (ITC) provides expert audio-visual integration services.  Our adaptable structure enables us to complete and provide follow-on support for large-scale installations throughout the United States, Canada, and Mexico. ITC is a rapidly growing and evolving family-owned and operated business and we need you to join our growing family and client list!

Title: Lead A/V Technician - Buffalo

Department:  Operations

Reports To: Project Manager

Job Type: Full-time, Hourly

POSITION PURPOSE AND OBJECTIVES:

This position is responsible and accountable for directing and overseeing a team of technicians responsible for the installation of hardware components of audio-visual systems ensuring all financial, programmatic and operating systems meet established targets.  This position reports to a Project Manager and is a member of the Operations team supporting the mission and goals of a "Best in Class" sales and AV integration program.  As an experienced member of a dynamic installation operation, the Lead AV Technician will work independently to coordinate, receive, inventory, assemble and install AV equipment on job site locations to comply with the company’s policies and procedures, including quality, safety, environmental, and business practices.

 Residency within 60 miles of Buffalo, NY is required.  As a national company, opportunities to work at job sites across the country are also available.

Essential job functions, duties and responsibilities:

This position is responsible for independently coordinating and overseeing teams responsible for the process of receiving, inventorying, assembling and installing AV equipment on job site locations. This position requires a variety of duties including construction labor as well as installation, troubleshooting and repair but not limited to:

• Directing the actions of others and be able to complete installations independently
• Coordinating, scheduling, and directing one or more installation teams and to ensure appropriate travel arrangements and accommodations when required
• Being responsible for the training and oversight of level one and level two technicians working at job sites and assisting them in attaining higher level certifications
• Moving and/or repositioning large equipment or wiring supplies. Individuals must be able to lift and carry heavy objects of 75 lbs. unassisted and to steady objects above shoulder height while fastened into place by co-workers
• Trouble-shooting audio and video equipment installations
• Installing and terminating cables with the appropriate solder or compression connector
• Drilling in drywall, concrete, and cinderblock for the purpose of installing projectors, projection screens, cameras, and speaker systems
• Working in confined spaces
• Working on ladders and lifts at heights in excess of 10ft
• Performing other duties as assigned

Knowledge, skills and abilities required:

• Prior AV team leadership and management experience (2-4 years)
• CTS certification is required
• CTS-I certification or the ability to achieve certification within 12 months of start date
• Ability to travel on regular/constant basis and often on short notice with long/unusual work hours  
• Successfully complete criminal background check, motor vehicle review, physical and drug test prior to start
• Strong communication skills and experience directing teams
• Computer proficiency and familiarity with standard office productivity software including Google, Microsoft Word and Excel
• Experience and comfort with hand tools, small power tools and industrial tools
• Ability to learn new tasks quickly
• Ability to make important decisions under tight timelines and in a fast-paced environment
• Problem-solving and time management skills
• Friendly and approachable
• Valid driver’s license with less than two citations in last two years and reliable transportation 
• Ability to lift 75 pounds and complete ladder and other safety training

Supervisory Responsibilities:

• Coordinating and directing one or more AV technician teams on job sites
• Requesting and coordinating the travel and accommodation needs of AV technician teams
• Managing and maintaining the relationships with customer point-of-contacts at various job sites

Working Conditions:

Work can be in normal comfortable air-conditioned environments, but will also include less comfortable cold or hot construction environments and on rare occasion, tasks require work outdoors 

Success Factors:

The personal characteristics that make an individual successful in this industry include:

• Optimism through challenges that demonstrates leadership and role-modeling
• Growth mindset that demonstrates adaptability and accountability
• Manages stress well and displays proactive decision making
• Shows initiative and is proactive, dependable and productive to complete tasks effectively and efficiently
• A professional attitude focusing on the success of Inter Technologies Corporation with a high degree of attention to details
• Works well with others, including taking direction and offering/receiving constructive feedback
• A professional and respectful attitude in dealing with others and adjusting to varied job assignments and tasks
• An aptitude toward time and resource management
• A desire to progress in job knowledge and qualifications and take on new responsibilities
• A desire to help others accomplish tasks and achieve goals
• Reporting to job locations on time and in appropriate work attire/PPE and ensuring that all team members do as well

Job offer consists of a competitive salary and benefits package that includes:

• Paid vacation and sick pay
• Medical coverage options: health, vision and dental
• Generous daily per diem while traveling to cover meals and non-reimbursable incidentals
• In-house travel team to make all work-related travel arrangements including air flights, ground transportation and lodging all paid through company accounts
• 401k program after one year of service and with employer contribution after one year of enrollment
• Tool kit, uniform shirt, PPE and a stipend per paycheck as a personal cell phone allowance

Pay: $25.00 - $45.00 per hour or commensurate with experience and in accordance with New York prevailing hourly wage requirements where applicable.

*Benefits listed are a highlight of what are offered to full-time, salaried and hourly employees and are subject to change.

The ADA prohibits discrimination against qualified individuals with disabilities. To determine whether an individual is qualified, the essential functions of each job should be identified. Essential job functions are those that are intrinsic to the position, and the individual who holds the job must be able to perform with or without reasonable accommodation.

PI7a8a8a748ee1-31181-38211698

This position will be posted until at least March 18th, 2026. This program provides a one-year opportunity for selected students to develop their knowledge and skills as a metal fabricator/welder in an industrial setting.

A trainee will receive college credit towards their Associate of Applied Science degree at NSCC, MECC or VHCC if they are a current student in the program. Completion of this program is one of the requirements for consideration for possible future employment as an Eastman metal fabricator apprentice. Upon completion of the Metal Fabricator/Welder trainee assignment the student will have been exposed to a variety of tools used to fabricate and repair various parts used in the manufacturing process at the Kingsport site. The student will be closely supervised and mentored on a daily basis with the goal of providing a hands-on learning environment. The trainee program duration is 12 months.

• Will develop knowledge and skills in the following techniques: Oxy-fuel welding and brazing, Flux-Core Arc Welding (FCAW), Gas Metal Arc Welding (GMAW) (MIG), Gas Tungsten Arc Welding (GTAW) (TIG), Shielded Metal Arc Welding (SMAW)
• May operate various types of metal shop equipment with proper training and supervision such as brakes, shears, rolls, positioners, band saws, cranes, etc.
• May operate various hand tools with proper training such as sanders, grinders, welding equipment, metal cutting equipment, etc.
• May serve as a fitter/helper for welders.
• May perform a variety of routine assignments that do not require the training/experience of a skilled craft worker.
• May cut or burn metals with close direction and supervision.
• May use various computer systems (SAP, Outlook, Excel).
• Maintain housekeeping and cleanup during and after completion of maintenance work.
• May perform other duties as required to ensure efficient completion of maintenance assignments, such as obtaining materials, parts or tools, operation of a lift truck or company vehicle, etc.
• May assist skilled craft workers in fabrication, installation, troubleshooting and repair of various equipment such as tanks, vessels, heat exchangers, etc. where specialized training and experience is not required.
• Share the responsibility for managing team business within defined boundaries and guidelines.
• Interact with others (team members, supervision, customers, etc.) in an empowering manner to share team leadership and establish and carry out appropriate team processes.
• Trainees are evaluated on: Safety, teamwork, job knowledge, learning speed, leadership qualities, output, productivity and dependability.

• High school diploma or GED is required.
• Must be a recent graduate (within the last 2 years) or currently enrolled in Northeast State, Mountain Empire or Virginia Highlands Metal Fabrication program as required. We will also accept applicants who have previously completed the combination welding program at TCAT.
• Students completing their 2nd semester are eligible to apply.
• If currently enrolled as a student, the trainee must maintain good standing with their educational institution during the trainee program and/or until graduation.
• Candidates must be able to demonstrate basic knowledge and skills by completing the ACT Workkeys assessment testing and attain required scores within 12 months of hire date. Must achieve required WorkKeys scores as listed below: Graphic Literacy: 4, Workplace Documents: 4, Applied Mathematics: 4. To be considered for a future full-time position, following completion of Trainee assignment, the WorkKeys scores listed above must be achieved. Candidates must upload transcripts as proof of enrollment or degree (in the "Additional Documents" section of the application).

• HS Diploma or GED is required.
• Must have valid driver's license.
• Must be legally authorized to work in the United States.
• Must be at least 18 years of age.
• Must be able to perform the essential elements of the positions with or without reasonable accommodations.
• Must follow all safety procedures.
• Must wear company-provided personal protective equipment: safety shoes, glasses with side shields & hard hats at all times in designated areas.
• Have a strong work ethic, demonstrating dependability, initiative & professional attitude.
• Must have clear, concise verbal & written communication skills.

Eastman Chemical Company is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, disability, pregnancy, veteran status or any other protected classes as designated by law. Eastman is committed to creating a highly engaged workforce, where everyone can contribute to their fullest potential each day.

Who Are We?

Stand Out For Good, Inc. is a rapidly growing women’s fashion company with 5 unique brands, in 130+ locations, across 38 states. Our stores feel like a sanctuary - a place of beauty from the inside out. From welcoming experiences and warm associates to thoughtfully curated products, our brands are built upon the founding principles of giving back and making a difference in the World.

Our Mission

“Stand Out. For Good”. At Altar’d State, those four words are more than just our motto, they are why we exist. From Mission Mondays, where 10% of our net proceeds go directly to local charitable organizations, to our long-standing partnership with Coprodeli USA, in which we are in the process of building 22 schools for impoverished communities in Peru, we are committed to giving back in meaningful ways to those in need.

The Procurement Intern will be highly motivated, detail oriented and support the procurement operations that drive our windows, activations, and experiential projects. This internship offers hands-on experience in sourcing, budgeting, logistics, and vendor coordination while providing exposure to cross-functional teamwork and real-world procurement strategy. The intern will assist with financial tracking, allocation planning, and data analysis to help achieve cost-effective, high-quality project outcomes.

Key Responsibilities

Procurement & Vendor Support

• Assist in sourcing vendors, gathering quotes, and comparing pricing and quality.
• Help maintain vendor communication, track order statuses, and support issue resolution related to product quality or delivery.
• Update and organize purchase records, contracts, and procurement documentation.
• Support tracking of vendor performance and service metrics.

Planning & Allocation

• Partner with teams to help prepare allocation plans aligned with project timelines and seasonal needs.
• Assist with distributing assets and materials based on store requirements and available inventory.
• Support case-pack and linear footage analysis to ensure accurate ordering and efficient allocation.

Budget & Financial Tracking

• Assist with tracking project budgets and monitoring actual vs. planned spend.
• Gather data for variance analysis and help identify potential cost-saving opportunities.
• Prepare basic financial summaries or reports for internal review with guidance from the team.

Data Analysis & Reporting

• Update procurement dashboards with data on shipping costs, damages, replacements, and other key metrics.
• Assist with time-study data collection to help forecast labor needs for installations.
• Use Excel to support simple data analysis, trend identification, and reporting tasks.

Logistics & Operations Support

• Help coordinate shipping schedules, freight details, and delivery timelines.
• Assist in preparing packing specifications and monitoring quality checks for project installations.
• Support troubleshooting delays or logistical issues by communicating with internal teams and vendors.

Qualifications

• Junior, Senior, or recent graduate Pursuing a degree in Supply Chain, Finance, Business, Operations, or a related field.
• Strong attention to detail, organization, and problem-solving skills.
• Basic proficiency in Excel (pivot tables, lookups, macros, scenario modeling is a plus).
• Strong communication skills and ability to collaborate with cross-functional teams.
• Interest in procurement, logistics, or budgeting within a creative or retail environment.
• Ability to manage multiple tasks and work in a fast-paced setting.

Stand Out For Good, Inc. is an equal opportunity employer and values diversity. All employment decisions are decided on the basis of qualification, merit and business need. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex or national origin.

We are proud to share that our associates have made us one of Fortune's Best Companies to Work For! Recently, our team has received the following recognition:

• #73 in Fortune 100 Best Companies to Work For® 2023
• #4 in Fortune Best Workplaces in Retail™ 2022
• #93 in Best Workplaces for Millennials™ 2023
• #34 in Fortune Best Workplaces for Women™ 2022