Amcor Plc Stock Split Jobs in Usa
4,390 positions found — Page 7
Run Test Panel Tech
Salary not disclosed
Run Test Technician
- Day Shift General Summary The Run Test Technician 3 is responsible for performing final functional testing, verification, and troubleshooting of industrial gas compressors/processing skids and PLC control panels prior to shipment.
This role ensures equipment meets safety, performance, and customer specifications by conducting run tests, analyzing data, and working closely with engineering, production, and quality teams.
Principle Duties & Responsibilities : Conduct Functional Run tests on natural gas compressor packages and PLC-based control panels in accordance with company procedures and customer specifications.
Verify proper operation of engines, compressors, control systems, and instrumentation.
Set up test environments, including fuel, electrical, and control connections.
Operate and monitor compressors during start-up, load, and shutdown cycles.
Test and validate PLC control logic, safety interlocks, alarms, and shutdown sequences.
Record and analyze test data to ensure compliance with performance and safety standards.
Identify, troubleshoot, and resolve mechanical, electrical, and control system issues.
Collaborate with engineering teams to provide feedback on design improvements and test outcomes.
Maintain calibration, cleanliness, and readiness of test equipment and facilities.
Adhere to all safety standards, environmental regulations, and company quality policies.
Accountability Responsibilities : Ensure all testing procedures are conducted in compliance with company and industry safety standards Demonstrate leadership in implementing and maintaining the 5S program Complete and properly sign off the GPS Traveler for each module or project Maintain detailed test records, issue reports, and document any non-conformances or deviations Recommend improvements to testing procedures to reduce downtime and enhance product reliability Influence Responsibilities : Act as a technical resource and role model for peers and junior technicians Promote a culture of safety, quality, and continuous improvement across teams Influence cross-functional collaboration by sharing insights and driving alignment on testing standards and expectations Encourage proactive problem-solving and accountability throughout the testing and assembly process Coordinate with the Manufacturing Supervisor(s) on potential quality issues or delays to projects Provide Technical feedback to assembly and engineering on design issues or deficiencies.
Provide feedback to other Supervisors, Manufacturing Engineers, and other team members regarding potential process improvements.
Required Support : Assist Supervisors training new employees.
Ensure all testing procedures are conducted in full compliance with OSHA, company, and industry safety standards.
Provide directions to resolve project issues based on Engineering recommendations Approve initiation of unit testing as needed.
Collaborate with Engineering, Production, and Quality Control to resolve testing issues efficiently.
Qualifications: Minimum of 3-5 years of experience troubleshooting PLC control panels and/or operating Caterpillar and Waukesha engines.
Proficiency in interpreting engineering documentation, including P&lDs, General Arrangement drawings, and Electrical schematics.
Hands-on experience with Caterpillar and Waukesha engines.
Familiarity with Ariel and Dresser Rand compressors.
Strong analytical and problem-solving abilities.
Excellent verbal and written communication skills.
Demonstrate dependability, motivation, and self-direction.
High attention to detail and strong organizational skills Ability to work effectively with minimal daily supervision.
Capable of providing guidance and leadership to junior personnel as needed.
Working Conditions: Fast-paced general office environment.
Many tasks have high degrees of time sensitivity.
Domestic and international travel is possible on occasion.
- Day Shift General Summary The Run Test Technician 3 is responsible for performing final functional testing, verification, and troubleshooting of industrial gas compressors/processing skids and PLC control panels prior to shipment.
This role ensures equipment meets safety, performance, and customer specifications by conducting run tests, analyzing data, and working closely with engineering, production, and quality teams.
Principle Duties & Responsibilities : Conduct Functional Run tests on natural gas compressor packages and PLC-based control panels in accordance with company procedures and customer specifications.
Verify proper operation of engines, compressors, control systems, and instrumentation.
Set up test environments, including fuel, electrical, and control connections.
Operate and monitor compressors during start-up, load, and shutdown cycles.
Test and validate PLC control logic, safety interlocks, alarms, and shutdown sequences.
Record and analyze test data to ensure compliance with performance and safety standards.
Identify, troubleshoot, and resolve mechanical, electrical, and control system issues.
Collaborate with engineering teams to provide feedback on design improvements and test outcomes.
Maintain calibration, cleanliness, and readiness of test equipment and facilities.
Adhere to all safety standards, environmental regulations, and company quality policies.
Accountability Responsibilities : Ensure all testing procedures are conducted in compliance with company and industry safety standards Demonstrate leadership in implementing and maintaining the 5S program Complete and properly sign off the GPS Traveler for each module or project Maintain detailed test records, issue reports, and document any non-conformances or deviations Recommend improvements to testing procedures to reduce downtime and enhance product reliability Influence Responsibilities : Act as a technical resource and role model for peers and junior technicians Promote a culture of safety, quality, and continuous improvement across teams Influence cross-functional collaboration by sharing insights and driving alignment on testing standards and expectations Encourage proactive problem-solving and accountability throughout the testing and assembly process Coordinate with the Manufacturing Supervisor(s) on potential quality issues or delays to projects Provide Technical feedback to assembly and engineering on design issues or deficiencies.
Provide feedback to other Supervisors, Manufacturing Engineers, and other team members regarding potential process improvements.
Required Support : Assist Supervisors training new employees.
Ensure all testing procedures are conducted in full compliance with OSHA, company, and industry safety standards.
Provide directions to resolve project issues based on Engineering recommendations Approve initiation of unit testing as needed.
Collaborate with Engineering, Production, and Quality Control to resolve testing issues efficiently.
Qualifications: Minimum of 3-5 years of experience troubleshooting PLC control panels and/or operating Caterpillar and Waukesha engines.
Proficiency in interpreting engineering documentation, including P&lDs, General Arrangement drawings, and Electrical schematics.
Hands-on experience with Caterpillar and Waukesha engines.
Familiarity with Ariel and Dresser Rand compressors.
Strong analytical and problem-solving abilities.
Excellent verbal and written communication skills.
Demonstrate dependability, motivation, and self-direction.
High attention to detail and strong organizational skills Ability to work effectively with minimal daily supervision.
Capable of providing guidance and leadership to junior personnel as needed.
Working Conditions: Fast-paced general office environment.
Many tasks have high degrees of time sensitivity.
Domestic and international travel is possible on occasion.
Not Specified
Manufacturing Engineer - Vision Systems, BlueOval Battery Park Michigan
✦ New
Salary not disclosed
At BlueOval Battery Park Michigan, you will...
- use your entrepreneurial skills and team mindset to come up with data-driven solutions
- build and lead an agile team to deliver the advanced technology that drives the future
- create a culture of trust, encourage diversity of thought and foster leadership in others
- be part of the historic transformation of the automotive industry.
What you'll do...
* Ensure adherence and compliance to the Ford Production System (FPS) Key Unifying Processes (KUP)
* Understand and consistently apply standard manufacturing operating systems and principles.
* Enforce compliance with Safety Operating System practices to achieve zero injuries.
* Ensure compliance with Quality Operating System practices to achieve zero defects.
* Use Andon data to prioritize efforts to achieve 100% flow.
* Identify and implement Controls Best Practice; launch Enablers, Training, and Change Control, etc.
* Liaison with IT on IT / Controls interface issues
* Drawing approvals and updates, Hydraulic, Pneumatic, Electrical
* Monitor use of Structured software specification, organize training for OEM's where required.
* Issue resolution during machine build, installation, and steady state production.
* Troubleshoot and resolve production-related downtime (i.e. PLC programs, HMI Screens, etc.)
* Setup and maintenance of industrial bar code scanners and printers
* Run-off equipment per Ford specifications at supplier and plant to validate capability and robustness including safety.
* Ensure production systems meet objectives through Process Design and FMEAs
* Work with plant and Manufacturing Engineering personnel with appropriate timing and installation documentation, to ensure efficient/timely installation and validation.
* Ensure the identification and capture of lessons learned along with their application to new programs, as well as the impact to existing strategies and standards.
* Troubleshoot PLC, robot, and other automation problems.
* Update program backups for automation
* Program new installations of vision, fastening, dispense, leak test, electrical test, gantry and conveyor systems.
* Reprogram automation for engineering changes and improvements.
* Candidates must possess full flexibility and a readiness to consistently work across all established standard, operating, and rotational shift schedules, encompassing day, night, weekend, and holiday shifts.
You'll have...
* Engineering Degree or equivalent combination of relevant education and experience.
* Fundamental Working Knowledge of Industrial Electronics, PLC Logic, and Controls
* Ability to demonstrate leadership behaviors combined with outstanding interpersonal, team building, leadership, and communication skills.
* Capability to learn, use, and troubleshoot new software and hardware systems to solve manufacturing problems that users are facing.
* 2+ years' experience with manufacturing
* 2+ years' networking and communication protocols experience
* 2+ years Prior experience in with industrial vision systems:
* 2D & 3D Vision systems for robot guidance, metrology, identification
* Fanuc 3D Vision, MapVision, and/or AI Vision systems
* 2+ years' Experience with PLC (Siemens/Allen-Bradley), HMI, VFD, Profinet, AutoCAD, C and RSLOGIX software and systems.
Even better, you may have...
* Masters Degree in Engineering
* 4 + years Controls Engineering experience
* 4 + years of prior experience with advanced vision systems in an automated manufacturing facility.
* Prior experience in with Fanuc robots, ABB robots and Universal robots
* Knowledge of Mfg. 4.0 (Industry 4.0) key principles - Data Collection, AI/ML, IIOT, Digital Twin
* Ability to understand networking and controls architectures.
* Understanding of Industrial Engineering concepts (constraint analysis, productivity analysis)
* Lean Manufacturing and Six Sigma Experience
* Extensive knowledge of BME IT standard footprint applications such as FIS, QLSM, QWX, GPTS, QDAS, OBL, PDS etc.
* Knowledge of data structures and algorithms
* In-depth knowledge of a packaged application, and familiarity with domain knowledge
You may not check every box, or your experience may look a little different from what we've outlined, but if you think you can bring value to Ford Motor Company, we encourage you to apply!
As an established global company, we offer the benefit of choice. You can choose what your Ford future will look like: will your story span the globe, or keep you close to home? Will your career be a deep dive into what you love, or a series of new teams and new skills? Will you be a leader, a changemaker, a technical expert, a culture builder…or all of the above? No matter what you choose, we offer a work life that works for you, including:
- Immediate medical, dental, vision and prescription drug coverage
- Flexible family care days, paid parental leave, new parent ramp-up programs, subsidized back-up child care and more
- Family building benefits including adoption and surrogacy expense reimbursement, fertility treatments, and more
- Vehicle discount program for employees and family members and management leases
- Tuition assistance
- Established and active employee resource groups
- Paid time off for individual and team community service
- A generous schedule of paid holidays, including the week between Christmas and New Year's Day
- Paid time off and the option to purchase additional vacation time.
This position is a salary grade 7 and ranges from $84,480-141,360.
For more information on salary and benefits, click here: sponsorship is not available for this position.
Candidates for positions with Ford Motor Company must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire.
We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, disability status or protected veteran status. In the United States, if you need a reasonable accommodation for the online application process due to a disability, please call 1-888-336-0660.
#LI-Onsite
#li-RC1
- use your entrepreneurial skills and team mindset to come up with data-driven solutions
- build and lead an agile team to deliver the advanced technology that drives the future
- create a culture of trust, encourage diversity of thought and foster leadership in others
- be part of the historic transformation of the automotive industry.
What you'll do...
* Ensure adherence and compliance to the Ford Production System (FPS) Key Unifying Processes (KUP)
* Understand and consistently apply standard manufacturing operating systems and principles.
* Enforce compliance with Safety Operating System practices to achieve zero injuries.
* Ensure compliance with Quality Operating System practices to achieve zero defects.
* Use Andon data to prioritize efforts to achieve 100% flow.
* Identify and implement Controls Best Practice; launch Enablers, Training, and Change Control, etc.
* Liaison with IT on IT / Controls interface issues
* Drawing approvals and updates, Hydraulic, Pneumatic, Electrical
* Monitor use of Structured software specification, organize training for OEM's where required.
* Issue resolution during machine build, installation, and steady state production.
* Troubleshoot and resolve production-related downtime (i.e. PLC programs, HMI Screens, etc.)
* Setup and maintenance of industrial bar code scanners and printers
* Run-off equipment per Ford specifications at supplier and plant to validate capability and robustness including safety.
* Ensure production systems meet objectives through Process Design and FMEAs
* Work with plant and Manufacturing Engineering personnel with appropriate timing and installation documentation, to ensure efficient/timely installation and validation.
* Ensure the identification and capture of lessons learned along with their application to new programs, as well as the impact to existing strategies and standards.
* Troubleshoot PLC, robot, and other automation problems.
* Update program backups for automation
* Program new installations of vision, fastening, dispense, leak test, electrical test, gantry and conveyor systems.
* Reprogram automation for engineering changes and improvements.
* Candidates must possess full flexibility and a readiness to consistently work across all established standard, operating, and rotational shift schedules, encompassing day, night, weekend, and holiday shifts.
You'll have...
* Engineering Degree or equivalent combination of relevant education and experience.
* Fundamental Working Knowledge of Industrial Electronics, PLC Logic, and Controls
* Ability to demonstrate leadership behaviors combined with outstanding interpersonal, team building, leadership, and communication skills.
* Capability to learn, use, and troubleshoot new software and hardware systems to solve manufacturing problems that users are facing.
* 2+ years' experience with manufacturing
* 2+ years' networking and communication protocols experience
* 2+ years Prior experience in with industrial vision systems:
* 2D & 3D Vision systems for robot guidance, metrology, identification
* Fanuc 3D Vision, MapVision, and/or AI Vision systems
* 2+ years' Experience with PLC (Siemens/Allen-Bradley), HMI, VFD, Profinet, AutoCAD, C and RSLOGIX software and systems.
Even better, you may have...
* Masters Degree in Engineering
* 4 + years Controls Engineering experience
* 4 + years of prior experience with advanced vision systems in an automated manufacturing facility.
* Prior experience in with Fanuc robots, ABB robots and Universal robots
* Knowledge of Mfg. 4.0 (Industry 4.0) key principles - Data Collection, AI/ML, IIOT, Digital Twin
* Ability to understand networking and controls architectures.
* Understanding of Industrial Engineering concepts (constraint analysis, productivity analysis)
* Lean Manufacturing and Six Sigma Experience
* Extensive knowledge of BME IT standard footprint applications such as FIS, QLSM, QWX, GPTS, QDAS, OBL, PDS etc.
* Knowledge of data structures and algorithms
* In-depth knowledge of a packaged application, and familiarity with domain knowledge
You may not check every box, or your experience may look a little different from what we've outlined, but if you think you can bring value to Ford Motor Company, we encourage you to apply!
As an established global company, we offer the benefit of choice. You can choose what your Ford future will look like: will your story span the globe, or keep you close to home? Will your career be a deep dive into what you love, or a series of new teams and new skills? Will you be a leader, a changemaker, a technical expert, a culture builder…or all of the above? No matter what you choose, we offer a work life that works for you, including:
- Immediate medical, dental, vision and prescription drug coverage
- Flexible family care days, paid parental leave, new parent ramp-up programs, subsidized back-up child care and more
- Family building benefits including adoption and surrogacy expense reimbursement, fertility treatments, and more
- Vehicle discount program for employees and family members and management leases
- Tuition assistance
- Established and active employee resource groups
- Paid time off for individual and team community service
- A generous schedule of paid holidays, including the week between Christmas and New Year's Day
- Paid time off and the option to purchase additional vacation time.
This position is a salary grade 7 and ranges from $84,480-141,360.
For more information on salary and benefits, click here: sponsorship is not available for this position.
Candidates for positions with Ford Motor Company must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire.
We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, disability status or protected veteran status. In the United States, if you need a reasonable accommodation for the online application process due to a disability, please call 1-888-336-0660.
#LI-Onsite
#li-RC1
Not Specified
Electronics Technician I
🏢 CARGILL
$28.75
New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at or text CargillJobs to 60196.
Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill’s protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters.
Posting End Date: Accepting applications until job is filled and/or up to 60 days from the posting date
Job Location: Fort Morgan, CO
Job Type: Full Time
Shift(s) Available: 3rd
Compensation: $28.75/hr
Benefits Information
- Medical, Dental, Vision, and Prescription Drug Insurance
- Health and Wellness Incentives
- Paid Vacation and Holidays
- 401(k) with Cargill matching contributions
- Flexible Spending Accounts (FSAs)
- Short-Term Disability and Life Insurance
- Employee Assistance Program (EAP)
- Tuition Reimbursement
- Employee Discounts
Principal Accountabilities
- Daily Engagement of workforce through direction of work assignments, compensation, communication, recognition, development and coaching, etc…
- Manage the workflow process associated with electronics and some electromechanical areas of the facility, including the ASRS system.
- Develop preventative maintenance procedures to maintain equipment associated with electronics and limited electromechanical equipment throughout the facility; including the management of parts inventory and corrective actions.
- Manage safety culture through training and observations
- Liaison to contractors and Utilities department for projects and work orders
- Develop and update PLC and HMI programs as required based on established guidelines and controls for this type of equipment
Required Qualifications
- Eligible to work in the U.S. without visa sponsorship
- 18 years or older
- High school diploma or GED
- Able to read, write, and speak English
- Basic computer skills (Windows 7/10, Microsoft Office)
- Familiarity with Allen-Bradley PLCs (basic programming & troubleshooting)
- Comfortable learning new software and systems (PLC/HMI)
- Willing to work 6 days a week
Preferred Qualifications
- Experience in a food processing environment
- Proficient in Allen-Bradley PLC programming (RSLogix 500/ControlLogix 5000, FactoryTalk View)
- Skilled in installing and troubleshooting Ethernet-based industrial networks
- Able to read schematics and perform machine installation/repairs
- Knowledge of basic electrical circuits (24V & 120V AC/DC)
- 2-year degree in electrical/electromechanical tech or 3+ years in industrial controls/networking
- Bilingual in English/Spanish or English/Somali
Please note that this position does not include relocation reimbursement.
Equal Opportunity Employer, including Disability/Vet
To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
permanent
S
Electrical Engineer II
Salary not disclosed
Job Title: Engineer, Electrical II
Location: Carrollton, GA, Georgia, U.S
Direct Hire/Permanent role
A leader in technology and innovation, the client is one of North America's largest wire and cable producers. Client and its subsidiaries manufacture building wire and cable, utility products, metal-clad cable, portable and electronic cord products, OEM wire products, and engineered products. In addition, the client supplies assembled products, contractor equipment, electrical components, hand tools, and jobsite power and lighting solutions. The company also offers digital solutions, including contractor planning and utility grid resiliency, as well as field services, including cable testing, rejuvenation, and replacement,t to support our customers as a value-add partner. We are proud to offer competitive compensation, employee benefits, tuition reimbursement, and unlimited growth opportunities. Our more than seven decades of progressive growth can be attributed to our determination to develop innovative systems and solutions, exercising environmental stewardship, and enhancing the well-being of the communities in which we work and live. How will you power what's possible?
Job Summary/Objective:
Under the direction of the Manager of Engineering, the Electrical Engineer II troubleshoots and resolves malfunctions to machine control systems and makes recommendations to improve efficiency or address quality concerns.
Key Responsibilities:
Education, Experience, Skills
Required:
Minimum Education Level: Bachelor's
Specialized Degree: Electrical Engineering Degree
Years of Experience: 3+ Years
Field of Expertise: Mechanical or Electrical Engineering in a Manufacturing Environment
Preferred:
Certificates: PMP
Preferred Field of Expertise: Prior Experience in a Rod Mill or Foundry
Other Preferred Skills, Licenses, and Certificates:
Competencies
Benefits We Offer:
The client is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law.
Location: Carrollton, GA, Georgia, U.S
Direct Hire/Permanent role
A leader in technology and innovation, the client is one of North America's largest wire and cable producers. Client and its subsidiaries manufacture building wire and cable, utility products, metal-clad cable, portable and electronic cord products, OEM wire products, and engineered products. In addition, the client supplies assembled products, contractor equipment, electrical components, hand tools, and jobsite power and lighting solutions. The company also offers digital solutions, including contractor planning and utility grid resiliency, as well as field services, including cable testing, rejuvenation, and replacement,t to support our customers as a value-add partner. We are proud to offer competitive compensation, employee benefits, tuition reimbursement, and unlimited growth opportunities. Our more than seven decades of progressive growth can be attributed to our determination to develop innovative systems and solutions, exercising environmental stewardship, and enhancing the well-being of the communities in which we work and live. How will you power what's possible?
Job Summary/Objective:
Under the direction of the Manager of Engineering, the Electrical Engineer II troubleshoots and resolves malfunctions to machine control systems and makes recommendations to improve efficiency or address quality concerns.
Key Responsibilities:
- Troubleshoots and resolves malfunctions to machine control systems and makes recommendations to improve efficiency or address quality concerns
- Experience and proficiency with ladder logic/PLC programming, Siemens experience required
- Develops new and modifies existing PLC and/or HMI applications, interfaces, or embedded control systems
- Participates in the set-up and commissioning of new systems or the upgrading of current systems
- Knowledge of AC and DC circuitry and electrical concepts
- Versatile in ladder logic and various PLC programming languages. Working knowledge of field control devices (motors, relays, switches, photoeyes, etc.)
- Designs, develops, maintains, and modifies instrumentation and control systems
- Start to finish electrical control system hardware design experience (control panel and field wiring)
- Competency in Electrical CAD
- Ability to work independently as well as in a team environment
Education, Experience, Skills
Required:
Minimum Education Level: Bachelor's
Specialized Degree: Electrical Engineering Degree
Years of Experience: 3+ Years
Field of Expertise: Mechanical or Electrical Engineering in a Manufacturing Environment
Preferred:
Certificates: PMP
Preferred Field of Expertise: Prior Experience in a Rod Mill or Foundry
Other Preferred Skills, Licenses, and Certificates:
- Working knowledge of power distribution, networks, PLC, HMI, and drive hardware and software
- Ability to read and create schematic drawings using AutoCAD software
- Must be able to communicate effectively with Operators, Technicians, Management,a nd others
- Ability to work independently as well as in a team environment
- Must possess a sense of urgency and ownership when working within time constraints
- Must have strong computer skills and be proficient in Microsoft Word and Excel
Competencies
- Action Oriented
- Balances Stakeholders
- Collaborates
- Customer Focus
- Nimble Learning
- Plans and Aligns
Benefits We Offer:
- 401k with Matching
- Family and Individual Insurance Packages (Health, Life, Dental, and Vision)
- Paid Time Off & Paid Holidays
- Long & Short-Term Disability
- Supplemental Insurance Plans
- Employee Assistance Program
- Employee Referral Program
- Tuition Reimbursement Programs
- Advancement & Professional Growth opportunities
- Parental Leave
- & More
The client is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law.
Not Specified
Controls & Integration Engineer III, Electrical
🏢 CPG
Salary not disclosed
Position:
Controls & Integration Engineer III, Electrical
Location:
Jessup, MD
Job Id:
914
# of Openings:
2
TITLE: Controls & Integration Engineer III, Electrical
LOCATION: Jessup, MD
POSITION SUMMARY: Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including building management systems, power system automation and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customers' complex needs.
Specific areas of expertise for this position include power chain monitoring and control systems in Data Centers and /or mission critical environments. Experience in Electrical Power Monitoring Systems (EPMS) and field device configuration such as gateways, PLC, Meters, Relays, and SCADA/HMI software. Experience in Building Automation Systems (BAS) and configuration/programming of field controllers is beneficial.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
Managerial Responsibilities
QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
Computer/Networking Skills:
Certificates and Licenses:
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
*We Utilize E-verify
#LI-TG1
Pay Range: $98,891 - $148,392 per year
Apply for this Position
Controls & Integration Engineer III, Electrical
Location:
Jessup, MD
Job Id:
914
# of Openings:
2
TITLE: Controls & Integration Engineer III, Electrical
LOCATION: Jessup, MD
POSITION SUMMARY: Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including building management systems, power system automation and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customers' complex needs.
Specific areas of expertise for this position include power chain monitoring and control systems in Data Centers and /or mission critical environments. Experience in Electrical Power Monitoring Systems (EPMS) and field device configuration such as gateways, PLC, Meters, Relays, and SCADA/HMI software. Experience in Building Automation Systems (BAS) and configuration/programming of field controllers is beneficial.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
- Design / Engineering
- Generate design documents for SCADA/Automation projects
- Develop design document narratives
- Perform requirements analysis
- Generate Sequence of Operations (SOO) / System Functional Documentation
- Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
- Comment Resolution
- Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
- Review design document narratives
- Perform execution and design scope gap analysis
- Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
- Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
- Assist in reviewing project specifications
- Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
- Programming
- Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
- Testing / Troubleshooting / Deployment / Commissioning
- Assist senior engineers in creating and updating testing and commissioning procedures
- Preparation of test reports
- Originates test procedures
- Commissioning of deployed systems
- Development of test equipment and simulation devices
- Perform Factory and Field Testing
- Maintenance
- Perform troubleshooting on service calls to existing and legacy system operators
- Perform hardware / software upgrades and replacements on existing systems
Managerial Responsibilities
- Estimates
- Assists senior engineers in preparation of cost estimates and supporting documentation
- Work with relevant stakeholders to review scope of project
- Conduct any surveys, inspections, tours, etc. of client sites, as required
- Assists senior engineers in evaluation and pricing of change orders from vendors
- Personnel Management
- Assigns tasks and coordinates with Technical Staff
- Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
- Bachelor's degree in electrical engineering and 5-7 years field experience
- Associate degree in the electrical field and 10 years field experience
- High school diploma and 15 years field experience
- 5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
- Experience in reading electrical and control schematics
- Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
- Experience in testing and troubleshooting control and protection systems
- Experience using basic electrical and hand tools
- Experience using testing, calibration, or industry-specific tools and software
- Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
- Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
- Must be a US CITIZEN
Computer/Networking Skills:
- Experience in OT and IT networking technologies and topologies
- Experience troubleshooting and diagnosing OT and IT networks and protocols
- Experience in CAD/CAE Software (Visio, AutoCAD)
- Experience in schedule management software (Project, Primavera P6)
- Standard Office Software (Microsoft Word, Excel, Access etc.)
Certificates and Licenses:
- Required Certifications
- Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
- Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
- Preferred Licenses / Certifications
- Design Build Institute of America (DBIA)
- Certified SCADA Security Architect (CSSA)
- Certified Automation Professional (CAP)
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
*We Utilize E-verify
#LI-TG1
Pay Range: $98,891 - $148,392 per year
Apply for this Position
Not Specified
Controls & Integration Engineer III
🏢 CPG
Salary not disclosed
Position:
Controls & Integration Engineer III
Location:
Jessup, MD
Job Id:
789
# of Openings:
1
TITLE: CONTROLS & INTEGRATION ENGINEER V
LOCATION: JESSUP, MD
*Salary Negotiable
POSITION SUMMARY:
Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including industrial controls and power controls and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customer's complex needs.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
Design / Engineering
Programming
Maintenance
Managerial Responsibilities
Estimates
Personnel Management
QUALIFICATIONS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
Computer Skills:
Certificates and Licenses:
* Required Certifications
* Preferred Licenses / Certifications
Supervisory Responsibilities:
* No supervisory responsibilities
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
CPG Participates in E-Verify
Learn more about CPG by checking out our website here
#LI-TG1
Pay Range: $98,891 - $148,392 per year
Apply for this Position
Controls & Integration Engineer III
Location:
Jessup, MD
Job Id:
789
# of Openings:
1
TITLE: CONTROLS & INTEGRATION ENGINEER V
LOCATION: JESSUP, MD
*Salary Negotiable
POSITION SUMMARY:
Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including industrial controls and power controls and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customer's complex needs.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
Design / Engineering
- Initiates design documents for small projects and in support of large programs
- Develops design documents narratives
- Performs requirements analysis
- Develops Sequence of Operations / System Functional Documentation
- Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
- Develops Specifications
- Performs QA/QC and technical reviews of designs
- Plans and Design Procedures and Equipment for Integrated Systems Factory Testing
- Comment Resolution
Mechanical-focused controls engineer (BAS/BMS)
- Experience on EPMS monitoring
- Certifications in Platforms (at least one), familiarity with any others preferred: Ignition, Aveva, Automated Logic, Siemens, Schneider EBO, Niagara N4, Iconics Gen64
- Experience with Federal Government controls projects (ICS/EMCS/UMCS) preferred
- Familiarity with Cisco network switch programming and design preferred
Programming
- Lead programming / configuration team efforts for complex automation and SCADA applications.
- Program / Configure / troubleshoot PLCs, RTUs, and/or HMI systems
- Testing / Troubleshooting / Deployment / Commissioning
- Author testing / commissioning procedures
- Preparation of test reports
- Originates test procedures
- Commissioning of deployed systems
- Development of test equipment and simulation devices
- Perform Factory and Field Testing
Maintenance
- Perform troubleshooting on service calls to existing and legacy system operators
- Perform hardware / software upgrades and replacements on existing systems
Managerial Responsibilities
Estimates
- Conducts any surveys, inspections, tours, etc. of client sites, as required
- Prepares cost estimates and supporting documents for small projects
- Perform hardware / software upgrades and replacements on existing systems
- Evaluation and pricing of change orders
Personnel Management
- Assigns technical tasks and coordinates with entry-level engineers
- Assigns tasks and coordinates with Technical Staff
QUALIFICATIONS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
- Experience in reading electrical and control schematics and plans
- Experience in control system startup, configuration, and calibration
- Experience in testing and troubleshooting control systems
- Experience using basic electrical and machinist hand tools
- Experience using testing, calibration, or industry-specific tools and software
- 3-7 years' experience
- Bachelor's degree in engineering or higher
- Associate degree (add 3 years)
- High school diploma (add 5 years)
- Must be a US Citizen
Computer Skills:
- Experience in computer networks
- Experience in CAD/CAE Software (Visio, AutoCAD)
- Experience in schedule management software
- Standard Office Software (Microsoft Word, Excel, etc.)
Certificates and Licenses:
* Required Certifications
- Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
- Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
* Preferred Licenses / Certifications
- Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
- Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
- Design Build Institute of America (DBIA)
- Engineer in Training (EIT) in relevant in field
Supervisory Responsibilities:
* No supervisory responsibilities
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
CPG Participates in E-Verify
Learn more about CPG by checking out our website here
#LI-TG1
Pay Range: $98,891 - $148,392 per year
Apply for this Position
Not Specified
Controls & Integration Engineer II, Electrical
🏢 CPG
Salary not disclosed
Position:
Controls & Integration Engineer II, Electrical
Location:
19775 Belmont Executive Plaza
Suite 200
Ashburn, VA
Job Id:
921
# of Openings:
1
TITLE: Controls & Integration Engineer II, Electrical
LOCATION: Ashburn, VA
POSITION SUMMARY: Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including building management systems, power system automation and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customers' complex needs.
Specific areas of expertise for this position include power chain monitoring and control systems in Data Centers and /or mission critical environments. Experience in Electrical Power Monitoring Systems (EPMS) and field device configuration such as gateways, PLC, Meters, Relays, and SCADA/HMI software. Experience in Building Automation Systems (BAS) and configuration/programming of field controllers is beneficial.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
Managerial Responsibilities
QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
Computer/Networking Skills:
Certificates and Licenses:
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
* We Utilize E-Verify
#LI-TG1
Pay Range: $85,996 - $129,050 per year
Apply for this Position
Controls & Integration Engineer II, Electrical
Location:
19775 Belmont Executive Plaza
Suite 200
Ashburn, VA
Job Id:
921
# of Openings:
1
TITLE: Controls & Integration Engineer II, Electrical
LOCATION: Ashburn, VA
POSITION SUMMARY: Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including building management systems, power system automation and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customers' complex needs.
Specific areas of expertise for this position include power chain monitoring and control systems in Data Centers and /or mission critical environments. Experience in Electrical Power Monitoring Systems (EPMS) and field device configuration such as gateways, PLC, Meters, Relays, and SCADA/HMI software. Experience in Building Automation Systems (BAS) and configuration/programming of field controllers is beneficial.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
- Design / Engineering
- Assists Senior Engineers in design documents for SCADA/Automation projects
- Developing design document narratives
- Perform requirements analysis
- Understanding of Sequence of Operations (SOO) / System Functional Documentation
- Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
- Comment Resolution
- Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
- Review design document narratives
- Perform execution and design scope gap analysis
- Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
- Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
- Assist in reviewing project specifications
- Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
- Programming
- Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
- Testing / Troubleshooting / Deployment / Commissioning
- Assist senior engineers in creating and updating testing and commissioning procedures
- Preparation of test reports
- Originates test procedures
- Commissioning of deployed systems
- Development of test equipment and simulation devices
- Perform Factory and Field Testing
- Maintenance
- Perform troubleshooting on service calls to existing and legacy system operators
- Perform hardware / software upgrades and replacements on existing systems
Managerial Responsibilities
- Estimates
- Assists senior engineers in preparation of cost estimates and supporting documentation
- Work with relevant stakeholders to review scope of project
- Conduct any surveys, inspections, tours, etc. of client sites, as required
- Assists senior engineers in evaluation and pricing of change orders from vendors
- Personnel Management
- Assigns tasks and coordinates with Technical Staff
- Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
- Bachelor degree in electrical or mechanical engineering and 2-5 years field experience
- Associate degree in the electrical or mechanical field (add 3 years field experience)
- High school diploma (add 5 years field experience)
- 2-5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
- Experience in reading electrical and control schematics
- Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
- Experience in testing and troubleshooting control and protection systems
- Experience using basic electrical and hand tools
- Experience using testing, calibration, or industry-specific tools and software
- Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
- Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
- MUST BE A US CITIZEN
Computer/Networking Skills:
- Experience in OT and IT networking technologies and topologies
- Experience troubleshooting and diagnosing OT and IT networks and protocols
- Experience in CAD/CAE Software (Visio, AutoCAD)
- Experience in schedule management software (Project, Primavera P6)
- Standard Office Software (Microsoft Word, Excel, Access etc.)
Certificates and Licenses:
- Required Certifications
- Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
- Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
- Preferred Licenses / Certifications
- Design Build Institute of America (DBIA)
- Certified SCADA Security Architect (CSSA)
- Certified Automation Professional (CAP)
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
* We Utilize E-Verify
#LI-TG1
Pay Range: $85,996 - $129,050 per year
Apply for this Position
Not Specified
Controls & Integration Engineer I, Mechanical
🏢 CPG
Salary not disclosed
Position:
Controls & Integration Engineer I, Mechanical
Location:
Remote
Job Id:
917
# of Openings:
1
TITLE: Controls & Integration Engineer I, Mechanical
LOCATION: Dallas, TX
POTISION SUMMARY: Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including building management systems, power system automation and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customers' complex needs.
Specific areas of expertise for this position include monitoring and control systems in Data Centers and /or mission critical environments. Experience in Building Automation Systems (BASS) and field device configuration such as field level controllers, PLCs, protocol converters, and SCADA/HMI software. Experience in Electrical Power Monitoring Systems (EPMS) and configuration/programming of electrical gear interfaces is beneficial.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
Managerial Responsibilities
QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
Computer/Networking Skills:
Certificates and Licenses:
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
*We utilize E-Verify
#LI-TG1
Pay Range: $85,996 - $129,050 per year
Apply for this Position
Controls & Integration Engineer I, Mechanical
Location:
Remote
Job Id:
917
# of Openings:
1
TITLE: Controls & Integration Engineer I, Mechanical
LOCATION: Dallas, TX
POTISION SUMMARY: Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including building management systems, power system automation and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customers' complex needs.
Specific areas of expertise for this position include monitoring and control systems in Data Centers and /or mission critical environments. Experience in Building Automation Systems (BASS) and field device configuration such as field level controllers, PLCs, protocol converters, and SCADA/HMI software. Experience in Electrical Power Monitoring Systems (EPMS) and configuration/programming of electrical gear interfaces is beneficial.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
- Design / Engineering
- Assists Senior Engineers in design documents for SCADA/Automation projects
- Developing design document narratives
- Perform requirements analysis
- Understanding of Sequence of Operations (SOO) / System Functional Documentation
- Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
- Comment Resolution
- Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
- Review design document narratives
- Perform execution and design scope gap analysis
- Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
- Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
- Assist in reviewing project specifications
- Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
- Programming
- Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
- Testing / Troubleshooting / Deployment / Commissioning
- Assist senior engineers in creating and updating testing and commissioning procedures
- Preparation of test reports
- Originates test procedures
- Commissioning of deployed systems
- Development of test equipment and simulation devices
- Perform Factory and Field TestingMaintenance
- Maintenance
- Perform troubleshooting on service calls to existing and legacy system operators
- Perform hardware / software upgrades and replacements on existing systems
Managerial Responsibilities
- Estimates
- Assists senior engineers in preparation of cost estimates and supporting documentation
- Work with relevant stakeholders to review scope of project
- Conduct any surveys, inspections, tours, etc. of client sites, as required
- Assists senior engineers in evaluation and pricing of change orders from vendors
- Personnel Management
- Assigns tasks and coordinates with Technical Staff
- Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
- Bachelor's degree in electrical or mechanical engineering and 2-5 years field experience
- Associate degree in the electrical or mechanical field (add 3 years field experience)
- High school diploma (add 5 years field experience)
- 2-5 years' experience with designing and servicing controls systems for chiller plants, complex air distribution equipment, equipment installation, and testing
- Experience in reading mechanical and control schematics
- Experience in building automation systems (BAS) startup, configuration, and calibration
- Experience in testing and troubleshooting control systems
- Experience using basic electrical and hand tools
- Experience using testing, calibration, or industry-specific tools and software
- Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
- Experience with test equipment and test equipment software
- Experience with networking design, configuration, and troubleshooting
- Experience with air handlers, chiller plant systems and data center CRAC units
- Ability to travel up to 80%
- MUST BE A US CITIZEN
Computer/Networking Skills:
- Experience in OT and IT networking technologies and topologies
- Experience troubleshooting and diagnosing OT and IT networks and protocols
- Experience in CAD/CAE Software (Visio, AutoCAD)
- Experience in schedule management software (Project, Primavera P6)
- Standard Office Software (Microsoft Word, Excel, Access etc.)
Certificates and Licenses:
- Required Certifications
- Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, JCI, ALC, Distech, etc.
- Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
- Preferred Licenses / Certifications
- Design Build Institute of America (DBIA)
- Certified SCADA Security Architect (CSSA)
- Certified Automation Professional (CAP)
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
*We utilize E-Verify
#LI-TG1
Pay Range: $85,996 - $129,050 per year
Apply for this Position
Not Specified
I
Maintenance Manager
Salary not disclosed
Must-Haves:
- 10+ years of maintenance experience
- 5+ years of management experience
- Ability to troubleshoot Allen Bradley PLCs (programming experience preferred)
- Ability to troubleshoot Fanuc robots (ideal: touch-up teaching)
- Experience with both mechanical and electrical systems
- High school diploma required; technical training/certifications preferred
- Experience managing spare parts inventory and ordering
- Strong leadership and ability to work within established guidelines
Plusses:
- Advanced PLC programming skills
- Technical certifications in electrical, hydraulics, pneumatics
- Familiarity with NEC, UL508A, NFPA 79 codes
Day-to-Day Responsibilities:
- Oversee preventive and reactive maintenance for plant operations
- Manage PM schedules and ensure timely completion
- Troubleshoot and repair machines and controls (extruders, corrugators, motors/drives, downstream equipment, chillers, etc.)
- Maintain spare parts inventory and order components as needed
- Manage CMMS performance and compliance
- Lead and develop maintenance team (currently 1 person, expanding to 2)
- Work with vendors for equipment installation and outsourced labor
- Handle some facilities maintenance and vendor coordination
- Support continuous improvement projects and capital investment opportunities
- Ensure safety compliance (Lockout/Tagout, Arc Flash, PPE)
Skills & Knowledge:
- Advanced electrical and mechanical troubleshooting
- Ability to read electrical, pneumatic, and mechanical drawings
- Proficient with electrical test equipment (voltmeter, ammeter, ohm meter, etc.)
- Knowledge of AC/DC drives, motors, and industrial wiring
- PLC I/O troubleshooting and networking
- Servo drive and motor motion training
- Strong interpersonal and leadership skills
- Proficient in Microsoft Office
- Root Cause Analysis and problem-solving experience
Education:
- High School Diploma or equivalent required
- Vocational/technical training preferred
- Basic PLC and drive training preferred
Not Specified
M
Project Manager /Controls Engineer
✦ New 🏢 Matheson
Salary not disclosed
JOB SUMMARY
The position is broadly responsible for the development of electrical and process control systems for equipment used in the Food Processing, Pharmaceutical, Chemical, Water Treatment, Manufacturing and other industries.
Essential Functions
Essential Function
Understanding of customer’s specific application and process requirements
Developing instrumentation lists, electrical wiring schematics, Bill of Materials, control panel layout, one line and point-to-point wiring diagrams.
PLC and SCADA programming
Preparing budgetary cost estimates
Supervising fabrication of control systems, performing factory and site checkout
Managing and physically participating in equipment and systems installation and startup
Developing and maintaining project documentation: drawings, Bill of Materials and equipment IOM manuals
Providing post-installation troubleshooting and technical support
Required for All Jobs
• Performs other duties as assigned
• Complies with all policies and standards
QUALIFICATIONS
Education
Education Level Education Details Req/
Pref
Associate's Degree
Bachelor's Degree Mechanical, chemical, or electrical engineering Required
Work Experience
Experience Experience Details Required/
Preferred
1-3 years
4-6 years
7-9 years
10+ years Experienced hands-on project manager with excellent electrical controls engineering, AutoCAD, PLC/SCADA programming, technical writing, and communication skills Required
Knowledge, Skills and Abilities
Industrial gases industry experience would be helpful. Good English writing and speaking skills are required.
Experienced hands-on project manager with excellent electrical controls engineering, AutoCAD, technical writing, and communication skills
Ability to read, understand and create electrical drawings, block diagrams and P&ID’s
Experience in process automation, instrumentation, and PLC/SCADA systems
Comprehensive experience programming Allen-Bradley CompactLogix, ControlLogix, WonderWare and Siemens PLCs and HMI
Working knowledge of motors, blowers, pumps, and compressors
Familiarity with NEC and NFPA standards
Licenses and Certifications
Licenses/Certifications Licenses/Certification Details Time Frame Required/
Preferred
PHYSICAL DEMANDS/WORKING CONDITIONS
Physical Demands Category:
Physical Demands
A thorough completion of this section is needed for compliance with legal standards such as the Americans with Disabilities Act. The physical requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Physical Demand N/A Rarely Occasionally Frequently Constantly Weight
Stationary Position X
Move/Traverse X
Stationary Position/Seated X
Transport/Carrying X
Exerting Force/Pushing X
Exerting Force/Pulling X
Ascend/Descend X
Balancing X
Position Self/Stooping X
Position Self/Kneeling X
Position Self/Crouching X
Position Self/Crawling X
Reaching X
Handling X
Grasping X
Feeling X
Communicate/Talking X
Communicate/Hearing X
Repetitive Motions X
Coordination X
Travel Requirements
Estimated Amount Brief Description
50% Extensive domestic travel will be required
Not Specified
jobs by
✓ All jobs loaded