Alignmed Brace Jobs in Usa

Main Duties / Required:

• Knowledge and use of basic telecom hand tools.
• Must understand customer service.
• Clear understanding of job safety requirements.
• Be able to read and understand floor plans.
• Should be familiar on wiring schemes and wiring testing.
• Should be able to pull all types of low voltage cable.
• Should understand and be capable in performing field terminations and labeling.
• Reports to Operations Manager and take daily directions from Technician, Technician II, Lead Technicians, Senior Technicians and Advance Senior Technicians.
• Capable of maintaining orderly paperwork, capable of running service jobs.
• Possess skill to layout MDF and IDF closets, be able to dress all types of cable, and perform all type of terminations.
• Capable of working in Data Centers
• Shall be able to install ladder racking and seismic bracing both above and under raise floor.
• Basic understanding of both copper and fiber cable testing and troubleshooting.
• Read and understand blueprints and design document
• Dress and furcate fiber trunks for splicing
• Maintaining orderly paperwork and running service
• Fusion Splice including Ribbon/Single OSP/ISP
• Install, connect, and decom network equipment
• Operate DSX 5000 tester/OTDR Tester
• Program testers
• Download test results to Linkware/Linkware Live
• Save test results, verify, and submit to customer
• Create mass labels and apply per Portmap
• Differentiate live cables from decom cable
• Copper testing and troubleshooting
• Conduct Service Swaps of live networking devices
• Understand "FIM" database and operate scanners

PHYSICAL REQUIREMENTS

• Primarily walking, standing, and bending for extended periods with some sitting.
• Ability to communicate effectively with verbal, written, visual and listening skills.
• Dexterity of hands and fingers to operate any required equipment as well as to operate a computer keyboard, mouse, and other technical instruments.
• Able to lift and carry heavy equipment, up to 50 pounds.
• Ability to pull cables.
• Ability to climb ladders an

Nice to have Skills:

Key Skills / Words: (at least 6)

Data Center

Technician

Decommission

Splicing

Low Voltage

Position Summary

The Maintenance Supervisor is responsible for the day-to-day maintenance operations of an assigned standards and any applicable laws. This position is also responsible for quality control, purchasing and supply management, budgeting, Risk Management, and personnel administration.

Essential Duties & Responsibilities

Coordinates the day-to-day operations of the property.

Assists supervisor with interviewing and hiring maintenance staff.

Directs and supervises daily activities of the maintenance team, such as planning and preparing

work schedules, assigning tasks and delegating work, monitoring progress and work flow,

reviewing work for timeliness and accuracy, and appraising work performance.

Consults with supervisor to determine and implement associate performance actions, which

includes raises, promotions, discipline, terminations, etc.

Schedules, monitors and performs preventative maintenance and apartment turns.

Leads on-site maintenance staff and participates in diagnosing problems and repairs in the areas

of HVAC, electrical, plumbing, swimming pool, carpentry, dry walling, exterior structural, and

appliances.

Manages and responds to resident maintenance issues and repairs by responding promptly and

professionally.

Inspects apartments before and after move-in and move-outs, as well as after the apartment has

been turned.

Performs property inspections on a regular basis in order to maintain cleanliness and identify

problems.

Ensures swimming pool and fitness areas are inspected daily.

Inspects buildings and grounds to ensure safety and cleanliness, and alerts Maintenance team to

items that need to be repaired.

Manages vendor selection and vendor relations, so as to ensure quality performance.

Obtains bids from outside contractors as well as oversees contractor work for completeness.

Prepares, executes and monitors maintenance budget and ensures expense control.

Purchases maintenance supplies for the property while staying within the planned budget.

Reviews, prepares, and submits property invoices accurately and in accordance with established

guidelines.

Communicates with supervisor regarding the overall maintenance function at the property.

Ensures excellent customer service to prospective and current tenants, and promotes a quality

living experience for all residents.

Education and/or Experience

High School diploma or equivalent.

Minimum 3 years of previous experience in property management maintenance, other building

maintenance or related trade is required.

Skills/Specialized Knowledge

Ability to read, write, understand, and communicate in English.

Ability to use a personal computer and has working knowledge of Microsoft Word and Excel, as

well as computer tracking systems used at the property.

Ability to use general office equipment, such as telephone, fax machine, printer, copier, and key

track system.

Excellent customer service and interpersonal skills; ability to relate to others.

Intermediate verbal and written communication skills.

Strong organizational and time-management skills.

Ability to perform basic mathematical functions.

Ability to read and comprehend budgets.

Comprehension of federal fair housing laws and any applicable local housing provisions.

Ability to multi-task.

Ability to make quick and effective decisions.

Ability to analyze and resolve problems.

Ability to cope with and defuse situations involving angry or difficult people.

Ability to negotiate a contract.

Ability to successfully delegate.

Ability to manage a team.

Ability to conduct interviews.

Ability to train.

Ability to set and meet goals.

Ability to consistently meet deadlines.

Ability to maintain flexibility and creativity in a variety of situations.

Ability to maintain confidentiality.

Ability to drive an automobile.

Required Licenses

Current driver license and automobile insurance.

May require one or more of the following certifications:

o EPA Certification, Type I and II.

o HVAC Certification.

o CPO certification (pool).

Other licenses and/or certifications as required by state law.

Other Requirements

Must maintain professional appearance and comply with prescribed uniform policy.

Must comply with all safety regulations, including the use of back brace, safety goggles and

gloves when appropriate.

Ability to be at work on a regular and consistent basis; Overtime may be required for this

position.

Ability to work weekends and non-traditional holidays.

Must be reachable at all times via phone or pager, except during approved time off.

Must be available to work on-call or when needed due to staffing shortages.

Some travel may be required.

Physical Demands

Standing, walking, and/or sitting for extended periods of time.

Frequent climbing, reaching, and use of fingers.

Moderate stooping, kneeling, crawling, pushing, pulling, and lifting, and talking and hearing.

Sustains substantially recurring movement to fingers, hands, wrists, legs, and feet.

Pronounced visual acuity (near and far) and field of vision.

Ability to judge distances and spatial relationships.

Ability to identify and distinguish color.

Ability to distinguish the differences or similarities in odors using nose.

Ability to lift and/or move an excess of 100 pounds or more.

Ability to use standard maintenance equipment.

Mental Functions

Ability to compare, copy, compute, compile, analyze, coordinate, synthesize, negotiate,

communicate, and instruct.

Ability to tolerate stressful situations.

Ability to work under moderate supervision.

Work Environment

Exposure to hot, cold, wet, humid, or windy conditions (temperatures may vary depending on the

weather in the different regions).

Exposure to noise, vibrations, atmospheric conditions as well as working in confined or restricted

spaces.

Hazards

Potential exposure to communicable diseases through frequent contact with public.

Possible exposure to short-tempered or aggressive people.

Potential exposure to chemicals, electrical shock, heights, mechanical parts or machines, fire, and

radiation.

We are committed to a culture of belonging and fostering an inclusive environment where we celebrate differences. As a great place to work, we empower everyone to be their full, authentic selves. We move fast, adapt quickly, and take pride in upholding the highest standards of quality in everything we do.

Job Purpose

Assists the department manager in reaching sales and profit goals established for the department. Replenishes product throughout the store during overnight hours. Increases customer confidence and loyalty by promoting and executing consistent and compliant operating conditions. Provides fresh and appealing products, courteous, knowledgeable and prompt service. Values diversity and supports an inclusive environment by embracing the backgrounds and experiences of the team.

Essential Responsibilities

SERVICE: Creates an environment that enables customers to feel welcome, important and appreciated to help build and retain customer confidence and loyalty. Ensures the department is merchandised per plan. Delivers daily conditions that meet the company's expectations for at shelf product availability, freshness, product rotation, inventory levels, stocking - including maintaining POG integrity and shelf price tags/signage, ordering and cooler/freezer conditioning Offers customers assistance in finding or suggesting product.

LEADERSHIP: Promotes trust and respect among associates by collaborating, promoting teamwork, and communicating company, department, and job specific information. Adheres to all local, state, and federal laws, and company guidelines.

FINANCIAL: Maintains an awareness of inventory/stocking conditions and reports any discrepancies in inventory. Reviews/inspects products for quality and freshness and takes appropriate action with those items. Ensures product is held at the proper temperature per food safety guidelines and retains documentation of temperate logs per policy.

COMPLIANCE/SAFETY: Ensures company standards for safety, proper food handling practices, sanitation and productivity are maintained. Adheres to all regulatory compliance requirements pertaining to food safety, United States Department of Agriculture (USDA) & Country of Origin Labeling (COOL), and Department of Agriculture (DOA). Executes all product recalls and withdrawals in a timely manner while ensuring all items are secured and removed from customer access. Reinforces safety programs by complying with safety procedures and inspects and identifies unsafe conditions to report to store management. Notifies management of customer or employee accidents. Reports all safety risk, or issues, and illegal activity, including robbery, theft or fraud. Ensures adherence to wage and hour policies and regulations. Cultivates a culture of safety within the store. Ensures self and all associates are working safely and have received necessary safety training. Ensures Hazardous Assessments are posted for associate reference and that Personal Protective Equipment is available and utilized by all associates executing tasks within the department, as required. Ensures equipment is in good repair; reports and assists with remediation (ex. lock out/tag out of equipment) of safety hazards within the department.

Disclaimer: Performs other job-related duties as assigned.

Qualifications

Required Education: High School / GED

Language Requirements: English

Spanish

Relevant Experience: 0 -3 yrs minimum

Knowledge, Skills & Abilities Required: Must be 18 years of age. Authorization to work in the United States or the ability to obtain the same. Successful completion of pre-employment drug testing and background check. Strong customer service skills. Exceptional interpersonal, motivational and communication skills.

Environmental Factors: Retail - General Heavy: Physical Demands: While performing the essential functions of this position, the employee is regularly required to stand or walk on various types of flooring, utilize manual dexterity, talk, see, hear, smell and perform repetitive movements with both hands and/or both feet. The employee is frequently required to reach at waist level or overhead, carry, push, or lift various loads up to the required weights listed. The employee is occasionally required to sit, balance, stoop, kneel, crouch and climb up to 30 ft. Working Conditions: While performing the essential functions of this position, the employee may be exposed to working in indoor, outdoor, cold, freezing, heated, and wet/humid working conditions. Safety Risk Factors: The employee is frequently required to twist back and/or neck, walk on a slippery or cluttered floor surface, work with hazardous equipment and be exposed to sharp objects. The employee is occasionally required to be exposed to loud noise, skin irritants, nuisance dust, fumes and sprays, hazardous cleaning solutions and other toxins. Overall Required Equipment: cleaning supplies and equipment, general office equipment, register, pricing gun, scales, scanner, various material handling equipment, such as racks, carts, pallet jacks, shopping carts Preferred Equipment: baler/compactor, box cutter Personal Protective Equipment: Goggles, Gloves, Back Brace Pulling Requirement: 250 lbs. Lifting Requirement: 50 lbs.

Travel Percent & Overnight

Travel Percent: Occasional

Overnight: No

Shift(s): Overnight varied shifts.

• Ensure work is done safely and meets quality standards.
• Must have own basic skill related tools and equipment if not supplied by the workplace.
• Lay-out, fabricate and brace metal structural parts, such as plates, bulkheads, and frames.
• Lay out position of parts on metal, working from blueprints or templates and using scribe and hand tools.
• Locate and mark reference lines, such as center, buttock, and frame lines.
• Position parts in hull of ship.
• Align parts in relation to each other, using jacks, turnbuckles, clips, wedges, and mauls.
• Mark location of holes to be drilled and install temporary fasteners to hold part(s) in place for welding.
• Install packing, gaskets, liners, and structural accessories and members, such as doors, hatches, brackets, and clips.
• May prepare molds and templates for fabrication of nonstandard parts.
• May tack weld clips and brackets in place prior to permanent welding.
• May roll, bend, flange, cut, and shape plates, beams, and other heavy metal parts, using shop machinery, such as plate rolls, presses, bending brakes, and joggle machines.
• Ensure work is done safely and meets quality standards.
• Assemble items as instructed by floor supervisor.
• Keep work areas clean and organized and take proper care of all equipment and facilities.
• Follow all company rules and policies.
• Provide a great level of attention to detail and focus on the given task.
• Work with team members to maximize productivity and efficiency.
• Prepare product for shipment.
• Report any unsafe work conditions or practice to supervisor.
• Lift raw materials, final products, and items packed for shipment, manually (up to 60 pounds), or using a hoist.
  

• None
  

• Ability to read and interpret documents furnished in written, oral, diagram or schedule form such as safety rules, operating and maintenance instructions, quality manuals and procedure manuals.
• Familiarity with the metric system
• Ability to perform simple shop math, convert decimals to factional equivalents and fractions to decimal equivalents.
• Ability to stand continuously for long periods of time.
• Ability to identify and measure material.
• Ability to follow instructions given both verbally and in written form.
• Willingness to learn and work to the best of his/her abilities as well as dependable work ethic.
• Knowledge of machines and tools, including their designs and uses.
• Ability to read blueprints, drawings, calipers, tape measures and angle gauges.
  

• High school graduate, or GED preferred.
• Six months to one-year related experience and/or training
• Experience with steel, aluminum and/or stainless steel required.
  

• Most work performed will be onboard a ship, in a dry dock or shipyard under fast- paced conditions; frequently requiring overtime.
• Consistent exposure to extreme temperatures, outdoor elements, high noise levels, toxic or caustic chemicals and dusty conditions.
• Work over extended periods of time in tightly configured confined spaces.
• Often works on scaffolds and ladders. To avoid injury, safety clothing is required along with safety devices to protect the eyes, head, or hearing.
  

• Measuring tapes, rulers, squares, levels, chalk lines, saws, shears, plasma cutters, oxy-fuel torches, angle grinders, welding machines, welding torches, electrodes, welding masks, cranes, hoists, chains, slings, come-alongs, hammers, screwdrivers, wrenches, pliers, vise grips, clamps, files, deburring tools, drills, grinders, sanders, impact wrenches, reciprocating saws, air hammers (pneumatic), riveters (pneumatic), forklifts, pallet jacks, trolleys, and other tools. Items listed are a representative sample but not an all-inclusive list.
  

• May be made to enable qualified individuals with disabilities to perform essential job functions.
  

Tomorrow is our home. At BSH, People Matter. Bring your unique skills, capabilities, and experiences to our dynamic teams where your contributions will drive our innovation culture. We strive to be a workplace that values people and supports opportunities for continuous professional and personal growth. As a leading manufacturer of home appliance brands Bosch, Gaggenau, and Thermador, we prioritize having a consumer centric mindset and creating positive experiences for the consumer throughout all interactions with our products and services. Join us now and give your career a home. You Belong Here.

New Bern, NC/ Full-time

Your responsibilities

The Clamp Truck Operator is responsible for loading and unloading product that is shipped and/or received at the Central Distribution Center. As a Clamp Truck Operator, it will be your responsibility to follow and abide by all BSH and CDC rules and procedures to the best of your ability.

Safety:

• Safely operates industrial clamp/lift truck, manual pallet jacks, and other forms of materials handling equipment on the distribution floor.
• Adheres to BSH guidelines by wearing and utilizing required PPE.

General:

• Maintains material handling equipment including electronic computers, mechanical scales, doors, door locks, door levelers, battery chargers and related equipment.
• Loads materials into vehicles, containers, and other forms of transportation installing strapping, bracing or padding to prevent shifting or damage in transit.
• Conveys materials from storage to designated staging areas and records serial numbers using the correct lifting apparatus for the designated product.
• Follows written or oral instructions to ascertain materials or containers to be moved in a timely, scheduled manner to the customer.
• Unloads and sorts materials from trailers and locate in the Distribution Center, either by directed put away or open location.
• Order picks and records number of units of materials moved or handled on a pick ticket.
• Attaches identifying tags or labels to materials or marks information on cases, boxes or other containers.
• Lifts heavy objects by hand or with handling equipment and cleans work area, machines and equipment.
• Palletize and wrap product for shipping.
• Completes PM sheets for his/her lift before each shift and reports any issues immediately.
• Demonstrate efficient knowledge of handling signage (fragile, this side up, etc.)
• Report all warehouse damages
• Must maintain inventory accuracy within .5%
• Segregate all quality holds to insure they are not shipped to the customer
• Performs all other duties assigned

Equipment:

• Standard Forklift Equipment Previous experience required. Operate both safely and efficiently.
• Clamp Truck Equipment Previous experience preferred. Operate both safely and efficiently.
• Maintain proper clamp pressure and handling requirements.
• Utilize designated clamp pressure by product type to ensure properly handling techniques.
• Demonstrate proper clamp positioning by product type to ensure damage free handling.
• Proper handling of clamp equipment while traveling to ensure loads are raised to the proper height from the ground.
• Proper handling of clamp equipment while traveling with an oversized load.
• Proper handling of clamp equipment when stacking and unstacking product.
• Ensuring slip sheets are properly utilized when stacking to ensure stability.
• Inspect clamps to ensure they are able to be safely operated while maintaining damage free product.

Your profile

• High-School Diploma Required
• Certification (Lift Truck Certificate) Required
• 0-2 Years of Experience (Warehouse / Distribution experience) Required
• Ability to work without constant supervision and the ability to think and act independently.
• Ability to use RF scanners
• Ability to safely operate various kinds of material handling equipment (fork lifts, pallet jacks, dock levers, etc.)
• The Labor Grade within this Job Classification is dependent on experience, knowledge, responsibility, performance, dependability and job complexity
• Excellent interpersonal skills.
• Demonstrable understanding of materials, inventory control, and overall concept of Distribution.
• High Degree of Accuracy
• RF Scanner, calculator, fork lift, basiloid, clamp truck, order picker, Drexel

Your Pay & Benefits

The pay range posted for this position is based on the location noted in the posting title. Exact compensation offered may vary based on your specific skillset and work location. If the position is bonus or incentive eligible then the payments range from 0% to 200% of target with details laid out within the plan document.

Benefits offered include the following:

• Medical, dental, vision, life insurance, short and long term disability benefits, employee assistance program (EAP), Adoption Benefits, HSA, FSA, and Dependent Care FSA starting on the first day of the calendar month following date of hire
• Eligible to participate in the 401(k) plan, which offers a fully vested 100% employer match on the first 4% of compensation contributed by employees
• Annual employer funded profit sharing dependent on company profitability
• Opportunities for employees to participate in a company sponsored Wellness plan and earn lower medical care premiums
• 2 weeks of paid vacation for all non-temporary status new hires below Director level positions. Vacation entitlement increases based on years of service with BSH.
• Unlimited paid vacation for all Director and above level positions.
• The greater of (a) 40 hours of paid sick leave or (b) state or local minimum requirements for paid leave (Non-Production Line)
• 40 hours of paid personal leave (Production Line)
• 12 days of paid holidays per year (max 8 hours paid per day)
• Employee, friends, and family discount program for company products.
• BSH provides ongoing product training, uniforms, computer tablet, cell phone and a company vehicle for eligible positions.

Further information

Please visit and learn about what makes BSH a Top Employer! BSH is an equal opportunity employer and does not discriminate on the basis of race, religion, color, ancestry, national origin, caste, sex, sexual orientation, gender, gender identity or expression, age, disability, medical condition, pregnancy, genetic makeup, marital status, military service, or any other protected class. By including everyone and ensuring equal opportunities, BSH unleashes its full potential - EOE / AA Employer. This position is eligible for the Employee Referral Bonus program. We participate in E-Verify.

Position Purpose:

Our Physical Therapy Assistants, PTA, provide physical therapy services to Mt. Carmel patients under the guidance and supervision of a Physical Therapist and following a written plan of care established by the physician and physical therapist. Our PTAs assist in assessing our patients need for physical therapy devices and interventions and instructs our patients and their family members in the use and care of therapeutic appliances and devices, such as wheelchairs, braces, etc.

What You Will Do:

• Provide one-to-one care with your patients in their homes
• Enjoy a truly patient-centered focus
• Excel with supportive, motivated colleagues in an inspiring environment
• Flexibility
• Competitive salary
• Career paths and professional development
• Learn the industry's best, easy-to-use, advanced technology

Minimum Qualifications:

• Graduation from a two-year college-level program approved by the American Physical Therapy Association.
• Minimum of six months experience under a qualified Physical Therapist.
• Home health experience preferred.
• Must be able to function in a practice environment with minimal direct supervision, accepting personal responsibility for maintaining a professional relationship with the agencys clients and their families.
• Must accept responsibility for maintaining clinical practice skills learning and adhering to agencys policies and procedures on an on-going basis.
• Ability to consistently demonstrate commitment to the mission and Organizational Code of Ethics, and adhere to the Compliance Program.
  Must have current Drivers license and reliable transportation to and from work site.

Position Highlights and Benefits:

• Medical, dental and vision insurance - day one benefits
• Short and long-term disability
• 403b with matching contribution
• Generous paid time off PLUS 7 paid holidays
• Comprehensive orientation
• Tuition reimbursement up to $5,250 a year

Ministry/Facility Information:

Mount Carmel Home Care is a member of Trinity Health At Home, a national home care, palliative care and hospice organization serving communities in twelve states. We are central Ohio's comprehensive, trusted provider of home care in the sacred place that people call home. A Catholic-based, non-profit organization, we serve patients and their loved ones with home care (skilled nursing, physical/occupational and speech therapy and medical social work) and other home health services. Our legacy continues with a pioneering, future-thinking care model. We blend clinical expertise with our exclusive Home Care Connect virtual care program to help patients achieve their health goals. We have energizing new vision and strategy. Join us and shape the future of healthcare!

Apply now!

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

• Ensure work is done safely and meets quality standards.
• Must have own basic skill related tools and equipment if not supplied by the workplace.
• Lay-out, fabricate and brace metal structural parts, such as plates, bulkheads, and frames.
• Lay out position of parts on metal, working from blueprints or templates and using scribe and hand tools.
• Locate and mark reference lines, such as center, buttock, and frame lines.
• Position parts in hull of ship.
• Align parts in relation to each other, using jacks, turnbuckles, clips, wedges, and mauls.
• Mark location of holes to be drilled and install temporary fasteners to hold part(s) in place for welding.
• Install packing, gaskets, liners, and structural accessories and members, such as doors, hatches, brackets, and clips.
• May prepare molds and templates for fabrication of nonstandard parts.
• May tack weld clips and brackets in place prior to permanent welding.
• May roll, bend, flange, cut, and shape plates, beams, and other heavy metal parts, using shop machinery, such as plate rolls, presses, bending brakes, and joggle machines.
• Ensure work is done safely and meets quality standards.
• Assemble items as instructed by floor supervisor.
• Keep work areas clean and organized and take proper care of all equipment and facilities.
• Follow all company rules and policies.
• Provide a great level of attention to detail and focus on the given task.
• Work with team members to maximize productivity and efficiency.
• Prepare product for shipment.
• Report any unsafe work conditions or practice to supervisor.
• Lift raw materials, final products, and items packed for shipment, manually (up to 60 pounds), or using a hoist.
  

• None
  

• Ability to read and interpret documents furnished in written, oral, diagram or schedule form such as safety rules, operating and maintenance instructions, quality manuals and procedure manuals.
• Familiarity with the metric system
• Ability to perform simple shop math, convert decimals to factional equivalents and fractions to decimal equivalents.
• Ability to stand continuously for long periods of time.
• Ability to identify and measure material.
• Ability to follow instructions given both verbally and in written form.
• Willingness to learn and work to the best of his/her abilities as well as dependable work ethic.
• Knowledge of machines and tools, including their designs and uses.
• Ability to read blueprints, drawings, calipers, tape measures and angle gauges.
  

• High school graduate, or GED preferred.
• Six months to one-year related experience and/or training
• Experience with steel, aluminum and/or stainless steel required.
  

• Most work performed will be onboard a ship, in a dry dock or shipyard under fast- paced conditions; frequently requiring overtime.
• Consistent exposure to extreme temperatures, outdoor elements, high noise levels, toxic or caustic chemicals and dusty conditions.
• Work over extended periods of time in tightly configured confined spaces.
• Often works on scaffolds and ladders. To avoid injury, safety clothing is required along with safety devices to protect the eyes, head, or hearing.
  

• Measuring tapes, rulers, squares, levels, chalk lines, saws, shears, plasma cutters, oxy-fuel torches, angle grinders, welding machines, welding torches, electrodes, welding masks, cranes, hoists, chains, slings, come-alongs, hammers, screwdrivers, wrenches, pliers, vise grips, clamps, files, deburring tools, drills, grinders, sanders, impact wrenches, reciprocating saws, air hammers (pneumatic), riveters (pneumatic), forklifts, pallet jacks, trolleys, and other tools. Items listed are a representative sample but not an all-inclusive list.
  

• May be made to enable qualified individuals with disabilities to perform essential job functions.
  

RRD is a leading global provider of marketing, packaging, print, and supply chain solutions that elevate engagement across the complete customer journey. The company offers the industry's most trusted portfolio of creative execution and world-wide business process consulting, with services designed to lower environmental impact. With 22,000 clients, including 93% of the Fortune 100, and 32,000 employees across 28 countries, RRD brings the expertise, execution, and scale designed to transform customer touchpoints into meaningful moments of impact.

Stern Ave, Labels Plant

Responsibilities:

• May feed, remove, flex, jog, and stack printed sheets, folded signatures, labels or other in-process product to and from the equipment in the area assigned
• Load and unloads materials onto pallets, trays, racks, and shelves by hand
• May load materials into trucks and installs strapping, bracing, or padding to prevent shifting or damage in transit, using hand tools
• Conveys materials from storage or work sites to designated area, using hand truck, electric dolly, or other device
• Counts, weighs, and records number of units of materials moved or handled on daily production sheet
• Attaches identifying tags or labels to materials or marks information on cases, bales, or other containers
• Stacks or assembles materials into bundles and bands bundles together, using banding machine and clincher May occasionally use automated equipment and/or operate industrial truck or electric hoist to assist in loading or moving materials and products

• Basic knowledge of general warehouse layout, item identification codes, basic knowledge of warehouse procedures and familiarity with the storage areas in order to be able to place or pull paper stock, signatures and materials in accordance with standard procedures
• Able to stock, move, arrange, and rotate items in accordance with operating instructions or under guidance of a higher level employee
• Basic knowledge of shrink-wrap equipment
• Able to complete appropriate forms relating to stock description, quantity, unit of issue, and the labeling requirements for incoming and outgoing materials
• Basic skill in the use of shrink-wrap or strapping equipment, manual dollies, pallet jacks, carts or hand trucks and hand tools used in material handling tasks such as hammers, pliers, strapping and stretch wrapping tools and equipment, tape fasteners, metal band sheers and related equipment

All your information will be kept confidential according to EEO guidelines.

RRD is an Equal Opportunity Employer, including disability/veterans

Manages the daily operations of the bakery department. Increases customer confidence and loyalty by promoting and executing consistent and compliant operating conditions. Provides fresh and appealing products, courteous, knowledgeable and prompt service. Executes merchandising plans as outlined in department planners, toolkits or event packs being mindful of merchandising standards, product levels, shrink, and sales trends. Supervises, trains, and develops team members on performance of their job and provides coaching as needed. Values diversity and supports an inclusive environment by embracing the backgrounds and experiences of the team. This is a working management position that requires a balance of physical labor, delegation, team building, leadership, planning, and administrative work.

Department Overall Satisfaction % - Gauges the customer experience in your respective area of the business. Focus on Assortment, Cleanliness, Freshness, Staff Friendliness and Stock Availability.

Sales to Purchase % - Ensures the department is profitable by forecasting correctly and ordering as needed.

Production Planning Compliance % - Positions the department for strong sales by providing good information into the system to extract the best data out of the system.

SERVICE - 40% of time

Creates an environment that enables customers to feel welcome, important and appreciated to help build and retain customer confidence and loyalty. Ensures the department is merchandised per plan. Delivers daily conditions that meet the company's expectations for at shelf product availability, freshness, quality and value. Trains department associates on freshness, inventory levels, stocking and ordering and shelf conditioning. Offers customers assistance in finding or suggesting product.

Ensures customer requests and special orders are fulfilled.

LEADERSHIP - 19% of time

Promotes trust and respect among associates by collaborating, promoting teamwork, and communicating company, department, and job specific information. Establishes goals for merchandising, sales and profits and empowers the team to meet or exceed the goals.

Develops adequate scheduling to manage customer volume throughout hours of operation. Adheres to all local, state and federal laws, and company guidelines.

FINANCIAL - 20% of time

Completes daily and weekly administrative tasks (communications, online training, scheduling, pricing changes, order, etc.) Maintains an awareness of inventory/stocking conditions and reports any discrepancies in inventory. Reviews/inspects products for quality and freshness and takes appropriate action with those items. Plans, organizes and performs the inventory process. Utilizes production planning tools to accurately produce fresh products and ensures discarding or markdown processes are followed to reduce shrink. Ensures product is held at the proper temperature per food safety guidelines and retains documentation of temperate logs per policy.

COMPLIANCE/SAFETY - 20% of time

Ensures company standards for safety, proper food handling practices, sanitation and productivity are maintained. Adheres to all regulatory compliance requirements pertaining to food safety, United States Department of Agriculture (USDA) & Country of Origin Labeling (COOL), and Department of Agriculture (DOA). Executes all product recalls and withdrawals in a timely manner while ensuring all items are secured and removed from customer access.

Reinforces safety programs by complying with safety procedures and inspects and identifies unsafe conditions to report to store management. Notifies management of customer or employee accidents. Reports all safety risk, or issues, and illegal activity, including robbery, theft or fraud. Ensures adherence to wage and hour policies and regulations. Cultivates a culture of safety within the store. Ensures self and all associates are working safely and have received necessary safety training. Ensures Hazardous Assessments are posted for associate reference and that Personal Protective Equipment is available and utilized by all associates executing tasks within the department, as required. Ensures equipment is in good repair; reports and assists with remediation (ex. lock out/tag out of equipment) of safety hazards within the department.

Performs other job-related duties as assigned.

Required Education Course of Study: High School / GED

Preferred Education Course of Study: English & Spanish

Relevant Experience Supervisory Experience: 1 - 5 years minimum

Language(s) Required: English

Language(s) Preferred: English & Spanish

Knowledge, Skills & Abilities Required: Must be 18 years of age. Authorization to work in the United States or the ability to obtain the same. Successful completion of pre-employment drug testing and background check. Strong customer service skills. Exceptional interpersonal, motivational and communication skills. Knowledge of basic math. Operate bakery equipment (e.g., slicer, oven, scale, knives, box cutter and pricing gun) according to company guidelines. Ability to perform basic cake decorating skills (base ice cakes, borders, cake writing, etc.) Ability to perform basic baking skills (proofing product, product preparation, baking, packaging, etc.) Proficient with computer applications used in effectively operating the department. Possession of Food Safety Certification or the ability to obtain same within 180 days of placement.

Environmental Factors: Retail - Bakery: Physical Demands: While performing the essential functions of this position, the employee is regularly required to stand or walk on various types of flooring, utilize manual dexterity, talk, see, hear, smell and perform repetitive movements with both hands and/or both feet. The employee is frequently required to reach at waist level or overhead, carry, push, or lift various loads up to the required weights listed. The employee is occasionally required to sit, balance, stoop, kneel, crouch and climb up to 10 ft.

Working Conditions: While performing the essential functions of this position, the employee may be exposed to working in indoor, outdoor, cold, freezing, heated, and wet/humid working conditions. Safety Risk Factors: The employee is frequently required to twist back and/or neck, walk on a slippery or cluttered floor surface, work with hazardous equipment and be exposed to sharp objects. The employee is occasionally required to be exposed to loud noise, skin irritants, nuisance dust, fumes and sprays, hazardous cleaning solutions and other toxins. Overall Required Equipment: cleaning supplies and equipment, general office equipment, register, pricing gun, scales, scanner, various material handling equipment, such as racks, carts, pallet jacks, shopping carts Department Specific Required Equipment: Powered cutting equipment, such as a slicers, saws, grinders, various knives, various ovens, stoves, rotisserie, fryers, steamers, proofer, wrapping equipment Preferred Equipment: baler/compactor, general hardware tools such as a ladder, pliers, wire cutters, box cutter Personal Protective Equipment: Goggles, Gloves, Cutting Gloves, Fryer Gloves, Oven Gloves, Back Brace Pulling Requirement: 250 lbs. Lifting Requirement: 35 lbs.

Travel Requirements: Occasional Travel Percent, No Overnight

Shift: Varied

If you enjoy working outdoors in a professional and safe environment, consider a career with Bartlett Tree Experts! At Bartlett, we value a strong culture of excellence in safety, scientific research, lifelong learning, and career development.

As an Arborist Climber, you will be an integral member of a tree care crew with the primary responsibility of tree climbing and assisting Arborist Crew Leaders in performing all tree and shrub care services on residential and commercial properties.

• $22.00 - $28.00 per hour
• A safety-first culture and professional workplace
• Advancement opportunities - we promote from within
• Medical, dental, vision, life, and disability insurance
• 401k retirement plan
• Paid time off and holidays
• Industry credential/license pay increases - we encourage and invest in your professional development
• Company provided uniforms, PPE, gear, and equipment
• Boot reimbursement up to $150
• Access to training, continuing education programs, and a variety of resources provided by the Bartlett Tree Experts Research Laboratories in Charlotte, NC

To find out more about what life is like at Bartlett, check us out on Instagram @LifeatBartlett.

As an Arborist Climber, you will play an important role in:

• Performing ground, tree climbing, and aerial lift duties in support of specific job assignments, as directed by the Arborist Crew Leader
• Safely performing all aspects of arboriculture, including:
  • Tree identification
  • Tree risk assessments
  • Pruning
  • Removals
  • Cabling and bracing
  • Root collar excavations
  • Properly maintaining and operating tools and equipment (hand tools, chainsaws, chippers, and aerial lifts)
• Learning, understanding, and adhering to all safety rules and company safety policies

• A passion for nature, the environment, and the outdoors
• At least one (1) year of tree climbing (DdRT or SRT) and aerial lift operation experience in the tree care industry
• Valid driver's license (Class B CDL preferred)
• Ability to work outdoors year-round in all weather conditions

The F. A. Bartlett Tree Expert Company is an Equal Opportunity and E-Verify Employer.

Bel Air

MD

Production Arborist

12/2/2025

Regular Full-Time