Aire Control Remote Instructions Jobs in Usa

Regal Rexnord Cleveland, home of our Nook Brand is currently hiring Swiss Machinists for all our 2nd and 3rd Shift Operations.

Pay Range of $22/hour to $35/hour based on experience with overtime opportunities.

Shift premium for 2nd and 3rd shifts of $2/hour.

Hiring Bonus of $1500!

Plusbenefits on day 1, 401(k) with match, paid time off as well as joining a growing Company with a great team.

As a Swiss Machinist your mission is to produce small, advanced precision components by owning the full setup-to-run process in our Swiss department. You'll ensure quality at the source, sustain throughput, and collaborate with teammates to keep work flowing smoothly.

• Configure and operate CNC Swiss machines to meet exacting tolerances and finish requirements.
• Read/interpret blueprints and operation drawings; apply geometric dimensioning and tolerancing.
• Use Mitsubishi controls to optimize programs and processes; adjust G-code/M-code as needed.
• Employ precision gauges and instruments for in-process and final inspection.
• Support production setups, tooling changes, and troubleshooting activities.
• Document work, follow instructions, and partner across the team; perform other duties as assigned.
• Use Mitsubishi controls to optimize programs and processes.

• 35 years setting up and operating Swiss CNC lathes (required) and/or Citizen machines.
• Demonstrated proficiency with GD&T, CNC tooling, and troubleshooting.
• Experience with Mitsubishi controls; ability to read and edit programs (G-code/M-code).
• High school diploma or GED; strong math and blueprint-reading skills.
• Comfort installing/commissioning CNC equipment is beneficial.
• Effective communicator who follows written and verbal directions; team contributor.
• ITAR Registered and able to meet applicable compliance requirements.

• Medical, Dental, Vision and Prescription Drug Coverage
• Spending accounts (HSA, Health Care FSA and Dependent Care FSA)
• Paid Time Off and Holidays
• 401k Retirement Plan with Matching Employer Contributions
• Life and Accidental Death & Dismemberment (AD&D) Insurance
• Paid Leaves
• Tuition Assistance

Regal Rexnord is a publicly held global industrial manufacturer with 30,000 associates around the world who help create a better tomorrow by providing sustainable solutions that power, transmit and control motion. The Company's electric motors and air moving subsystems provide the power to create motion. A portfolio of highly engineered power transmission components and subsystems efficiently transmits motion to power industrial applications. The Company's automation offering, comprised of controls, actuators, drives, and precision motors, controls motion in applications ranging from factory automation to precision control in surgical tools.

The Company's end markets benefit from meaningful secular demand tailwinds, and include factory automation, food & beverage, aerospace, medical, data center, warehouse, alternative energy, residential and commercial buildings, general industrial, construction, metals and mining, and agriculture.

Regal Rexnord is comprised of three operating segments: Industrial Powertrain Solutions, Power Efficiency Solutions, and Automation & Motion Control. Regal Rexnord has offices and manufacturing, sales and service facilities worldwide. For more information, including a copy of our Sustainability Report, visit .

Regal Rexnord is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity, pregnancy, age, ancestry, national origin, genetic information, marital status, citizenship status (unless required by the applicable law or government contract), disability or protected veteran status or any other status or characteristic protected by law. Regal Rexnord is committed to a diverse and inclusive workforce. We are committed to building a team that represents diverse and inclusive backgrounds, perspectives, and skills.

• 
  
• Plan, set-up, prepare and perform fabrication, assembly, test and associated precision fabrication processes.
  
• Plan, set-up and operate a variety of tools and equipment such as power presses, band saws, belt sanders, expanders, and power shears to cut, form, trim, fit, roll, bend, drill and saw material to fabricate detail parts following established methods and procedures.
  
• Plan, set-up, and perform resistance spot welding and salt braze processes.
  
• Operate a variety of conventional and CNC/NC equipment to perform milling, drilling and turning operations to established methods and procedures.
  
• Plan, set-up, edit programs, and operate various presses and lasers to cut and form details.
  
• Plan, set-up, and perform pressure, leakage and functional tests.
  
• Plan, set-up and operate furnaces for processes such as drying, annealing, aging and curing product.
  
• Receive, unload, check, record, prepare, inventory, store, disburse, and deliver a variety of materials, products and equipment.
  
• Maintain rough stores, cribs, gage cabinets, and point of use storage areas. Order, organize, and store such items as supplies, materials, chemicals and tools.
  
• Safety wire, prepare product, make and apply nameplates and package for shipment.
  
• Fabricate and repair containers.
  
• Participate in review, analysis and ordering of purchased parts and materials to ensure appropriate inventory levels. Communicate with suppliers on delivery and quality concerns.
  
• Review open purchasing and shop part requirements. Review regularly with internal suppliers and purchasing. Coordinate and expedite deliveries as required.
  
• Perform visual, dimensional and functional inspection using variable measuring instruments such as micrometers, verniers and checking fixtures.
  
• Mix and apply bonding agents, coatings and chemicals.
  
• Check calibration of gages, instruments and equipment in accordance with established procedures. Record and document as required.
  
• Prepare test pieces and micros using equipment such as grinders, cutters, sanders, polishers and mounting presses.
  
• Sharpen or modify tools, make up simple forming dies, tooling and templates.
  
• Perform periodic maintenance such as cleaning and lubricating fixtures and equipment, adding fluids, charging filters and tightening hardware.
  
• Participate in audits of processes, procedure and work areas.
  
• Use computers and office equipment to record and process transactions.
  
• Utilize and maintain all necessary documentation such as logs, reports, charts, sampling plans, statistical process control records and nonconformance documents.
  
• Instruct one or two fellow employees in proper performance of duties.
  
• Utilize statistical methods to monitor process control and capability. Use data to investigate areas for potential process improvement.
  
• Improve processes and solve problems in cooperation with fellow employees and technical support.
  
• Move parts and materials to designated locations in accordance with material flow procedures, and initiate follow-up lists.
  
• Keep equipment and surroundings neat, clean and organized.
  
• Perform related duties as required within the scope of this job function.
  
• 3rd Shift: 12am to 7am, Monday to Friday.
  
• Training may take place on 1st, 2nd Shift, or 3rd Shift for up to 3 months.
  

• 
  
• Must have a high school diploma or GED.
  
• 1-2 years of experience in quality control and inspection processes.
  
• Prior use of air tools and fixtures to set-up parts for welding and understanding of location gages such vernier calipers and depth micrometers.
  

• 
  
• Sheet metal working skills such as grinding, bending, cut-off tools, polishing, deburring.
  
• Experience completing pressure test, assembly of Heli coils, riveting, and spot welding.
  
• 5-7 years of relevant experience in quality control and inspection processes.
  
• Familiarity with statistical process control (SPC) and other quality assurance methodologies.
  
• Experience with the use of precision measuring instruments and inspection equipment.
  

• 
  
• Medical, dental, and vision insurance
  
• Generous 401(k) plan that includes employer matching funds
  
• Collins provides eligible employees with paid time off
  
• Tuition reimbursement program
  
• Student Loan Repayment Program
  
• Life insurance and disability coverage
  
• Optional coverages you can buy: pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection
  
• Birth, adoption, parental leave benefits
  
• Ovia Health, fertility, and family planning
  
• Adoption Assistance
  
• Autism Benefit
  
• Employee Assistance Plan, including up to 10 free counseling sessions
  
• Healthy You Incentives, wellness rewards program
  
• Doctor on Demand, virtual doctor visits
  
• Bright Horizons, child and elder care services
  
• Teladoc Medical Experts, second opinion program
  
• And more!
  

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Sr. Avionics Harness Technician at Reliable Robotics, you will be a part of the Production organization. This is a small but growing team of highly motivated people passionate about delivering quality products and services on time, with unquestionable value. You'll play a critical role in the build, operation, integration, test, diagnostics, inspection, and maintenance of highly reliable avionics systems, such as wiring harnesses and electromechanical hardware. You'll also help with the installation of those systems onto aircraft. Your work will support various product development phases such as prototype, research and development, aircraft certification, and recurring production. This is a fantastic opportunity to serve as the last line of defense for ensuring that our safety-critical systems are reliable and produced to the intended engineering requirements.

Responsibilities

• Build, operate, integrate, test, diagnose, inspect, and maintain highly reliable systems, including wire harnesses, cable assemblies, avionics assemblies, and circuit card assemblies

• Read, interpret, and work from drawings, controlled documentation, and processes such as drawings, layouts, assembly procedures/work instructions, schematics, engineering drawings, and master parts lists

• Develop and improve manufacturing and installation instructions

• Assure product and process quality by testing finished-product and process capabilities

• Resolve product non-conformances and collaborate with the quality team to implement corrective actions

• Record work performed in a clear, precise, and complete manner

• Assist with the development of production and improvement processes

Basic Success Criteria

• 8+ years of professional experience building/fabricating wire harnesses or cable assemblies, or other testing, integration, or mechanical assembly experience

• 5+ years of hands-on experience reviewing technical designs and working from drawings, schematics, layouts, assembly/procedures, master parts lists, and other controlled documentation

• One or more of the following certifications: IPC-A-610, IPC-A-620, IPC J-STD-001, NASA-STD-8739.4

• Ability to proficiently use a PC/Mac, Google Suite, manufacturing execution systems, JIRA, or equivalent tools

• Ability to lift 25-pound boxes to a height of 3-4 feet, with or without reasonable accommodation

Preferred Criteria

• Experience working in an electro-mechanical manufacturing company, a precision manufacturing company, or a high-volume manufacturing company

• Electro-mechanical assembly and prototype development experience

• Experience setting up and running tests and experiment

Our team is passionate about delivering on our commitments, solving hard problems, continuously improving, and helping the business succeed. We are constantly reevaluating our technologies, products, and capabilities. If you are a lifelong learner, you will love this environment. Get in on the ground floor and help us build the company.

The position will be located at our facility in Mountain View, California.

Must be willing to travel up to 10% of the time.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $125K - $145K

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Sr. Production and Engineering Technician at Reliable Robotics, you will be a part of the Production organization. This is a small but growing team of highly motivated people passionate about delivering quality products and services on time, with unquestionable value. You'll play a critical role in the build, operation, integration, test, diagnostics, inspection, and maintenance of highly reliable systems, including electro-mechanical assemblies, wiring harnesses, components, and subassemblies. You'll also help with the installation of those systems onto aircraft. Your work will support various product development phases such as prototype, research and development, aircraft certification, and recurring production. This is a fantastic opportunity to serve as the last line of defense for ensuring that our safety-critical systems are reliable and produced to the intended engineering requirements.

Responsibilities

• Build, operate, integrate, test, diagnose, inspect, and maintain highly reliable systems, including avionics and electromechanical assemblies, wire harnesses, and circuit card assemblies

• Read, interpret, and work from drawings, controlled documentation, and processes such as drawings, layouts, assembly procedures/work instructions, schematics, engineering drawings, and master parts lists

• Develop and improve manufacturing and installation instructions

• Assure product and process quality by testing finished-product and process capabilities

• Resolve product non-conformances and collaborate with the quality team to implement corrective actions

• Record work performed in a clear, precise, and complete manner

• Assist with the development of production and improvement processes

Basic Success Criteria

• 7+ years of professional experience building and testing electromechanical assemblies, fabrication, integration, or mechanical assembly experience

• 4+ years of hands-on experience reviewing technical designs and working from drawings, schematics, layouts, assembly/procedures, master parts lists, and other controlled documentation

• Ability to proficiently use a PC/Mac, Google Suite, manufacturing execution systems, JIRA, or equivalent tools

• Ability to lift 25-pound boxes to a height of 3-4 feet, with or without reasonable accommodation

Preferred Criteria

• IPC and/or J-STD certification

• Experience working in an electro-mechanical manufacturing company, a precision manufacturing company, or a high-volume manufacturing company

• Electro-mechanical assembly and prototype development experience

• Experience setting up and running tests and experiments

• Experience with electrical wiring

• Soldering experience

Our team is passionate about delivering on our commitments, solving hard problems, continuously improving, and helping the business succeed. We are constantly reevaluating our technologies, products, and capabilities. If you are a lifelong learner, you will love this environment. Get in on the ground floor and help us build the company.

The position will be located at our facility in Mountain View, California.

Must be willing to travel up to 10% of the time.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $125K - $145K

Perini Management Services Inc., a Tutor Perini Company, is seeking a Construction Qc Manager to join our team in Fort Gordon, Augusta, GA.

Perini Management Services, Inc. is a full-service construction firm that knows how to get the job done, even under the most complex circumstances. We deliver diversified construction services, including design-build, to clients worldwide.

Our client-centered approach and competitive, enterprising spirit have yielded many longstanding partnerships throughout the world. We are a close-knit team of construction professionals eager to take on new challenges suited to our expertise. We are committed to working with clients to deliver the projects you need in the time you need it.

When federal agencies and multinational firms need a construction partner to respond to critical situations, they can count on Perini Management Services, Inc. We've provided design-build and design-bid-build construction for more than four decades, responding to disasters and supporting military operations around the globe.

Across the globe, notable projects include the US Coast Guard Maritime Patrol Hanger on Cape Cod, U.S Forces Operations Facility at Camp Victory, Iraq, National Army Brigades in Afghanistan, the Air Warfare Center in Saudi Arabia and multiple security upgrades for U.S. Embassy's across the globe.

As a Quality Control Manager at Perini Management Services, reporting to Project Manager, you will have the opportunity to:

• Implement and maintain the approved Contractor Quality Control Plan including responsibility for all required preparatory meetings, initial inspections and follow up inspections.
• Develop understanding/working knowledge of company quality control program, industry standards, procedures, etc. required to perform assigned work.
• Manage and review shop drawings and product submittal process.
• Plan, schedule and run Preparatory Meetings.
• Perform quality control inspections and witness tests to determine acceptability of work.
• Schedule and coordinate QA inspectors with Owner's Rep.
• Assist in maintaining work performance records, inspection records and other related items; assure correctness of all documents.
• Assist in preparation/implementation of quality control procedures, i.e., inspection instructions, control measuring and test equipment, etc.
• Participate in internal/external quality control audits.
• Prepare and submit daily activity and work-force reports.
• Inspect and inventory material shipments for compliance.
• Insure progress by proactively addressing Q.C. issues
• Coordinate and schedule third-party inspectors/inspections.

Requirements:

• Experience as QC/QA on multiple Design-Build Projects
• Four (4) year engineering degree or equivalent, or 5 or more years of construction QC, Supervision, and/or Management Experience
• Temporary relocation to project required.
• Experience with Federal Government Clients preferred.
• NAVFAC/USACE QCM Certification Required
• EM385 certification a plus.
• Experience with RMS software preferred.
• Field experiences inspecting/installing MEP systems preferred.

Perini Management Services builds extraordinary projects, and we need exceptional talent. Join us and together we will build the future.

Equal Opportunity Employer

• Setup and operate multiple machines and machining centers.
• Read, interpret, and follow complex blueprints, operating sheets and procedures, sketches, and related technical data to determine tooling requirements, setup procedures, control settings, and machining method and sequence.
• Mount, align, position, and secure tooling, attachments, and work piece on machine.
• Enter commands to input, output, or retrieve preprogrammed instructions from database.
• Calculate, set, and operate machine controls to position spindle in relationship to work piece and to regulate factors such as cutting depth, speed, feed, and coolant flow.
• Input either through automatic download of manually, all SPC and measurement related information as defined by the engineering community to establish and maintain process controls.
• Operate machine and monitor displays and machine operation to detect machine or machining malfunctions or deviations.
• Monitor machines and machining operations to stop and change cutting tools and setup according to required machining sequence or to measure parts for conformance to blueprint specifications.
• Enter commands or manually adjust machine controls to correct malfunctions or out-of-tolerance machining.
• Operates machine manually to perform non automated functions and when automatic programming is faulty or machine malfunctions.
• Use a variety of precision inspection equipment to verify all applicable features using appropriate inspection methods.
• Maintain logs or records and discuss control media errors with Supervisor and Engineering/Programming personnel to resolve problems.
• Perform daily machine maintenance and housekeeping duties such as but not limited to maintain and adjust oil and coolant levels, monitor and adjust coolant concentration, clean machines, tooling parts, and surrounding work areas.
• Operate pendant crane and properly rig parts ranging from 5-1000lbs.
• Operate motorized and manual pallet jacks as well as box dolly when necessary.
• Assistance may be given to other operators on proper operational procedures. This includes assistance in training other operators to run machines and perform any other job-related tasks.
• Wear all appropriate PPE and abide by all safety rules and regulations as designated by the local EH&S department.

• High school diploma or its equivalent is required.
• Minimum of two (2) years of experience in set-up and operation of CNC Mill/Turn Centers, completion of an accredited training program will be considered.
• If necessary, be able to demonstrate ability to perform above skills on a test piece.
• Prossess sufficient computer skills.
• Ability to demonstrate CNC control abilities, including editing speeds, feeds, tool offsets, and fixture offsets.
• Ability to read and interpret complex blueprints, procedures, and work instructions.
• Ability to use various measuring instruments including dial bore gages, indicator snap gages, verniers, and .0001 micrometers.
• Demonstrate use of various measuring instruments including but not limited to; dial bore gages, indicator snap gages, air gages, radius gages, Vernier's, and .0001 micrometers.
• Possess skills necessary to maintain accurate documentation.
• Ability to operate a pendant crane and a motorized and manual pallet jack and box dolly.
• Ability to properly rig parts ranging from 5 - 1000 lbs.
• Possess necessary personal tools.
• Must be willing and available to work any shift (2nd shift: 3pm - 11pm, 3rd shift: 11pm - 7am).

• Competitive salary and benefits package, including health, dental, and retirement plans.
• Flexible work schedules and paid time off to promote a healthy work-life balance.
• Professional development opportunities, including mentorship programs and sponsorship for continuing education.
• An inclusive atmosphere that celebrates new perspectives and supports collaboration between different generations.
• The chance to be part of a mission-driven organization making a positive impact on the future of energy.
• Opportunities for continuous learning and training to grow throughout your career!

Century Aluminum is a global producer of primary aluminum and operates aluminum reduction facilities in the United States and Iceland. Our primary aluminum facilities produce standard grade and value-added primary aluminum products.

This is a full-time position (schedule is TBD), located in Mt. Holly, Goose Creek, SC.

JOB DUTIES

As a Maintenance Electrician, you will be responsible for fabricating, installing, inspecting, testing, operating, repairing and maintaining all types of electrical, mechanical and electronic equipment in a safe and orderly manner as directed by a Maintenance Supervisor.

REQUIREMENTS

• Five (5) years industrial electrical maintenance experience.
• Formal Apprenticeship or equivalent trades training is desirable.
• Vocational or high school graduate or equivalent.

PHYSICAL REQUIREMENTS

The tasks listed are the most physically demanding tasks required of the Maintenance Electrician position.

Standing - worker stands on concrete, rock, dirt or equipment (frequent basis)

Walking - worker is walking on concrete floors, rock, or dirt during the shift (frequent basis)

Strength

• Lifting - required to lift various tools, parts, and equipment such as an electrical testing and measuring equipment, conduit, ladders and scaffolding, vibration analyzers, soldering equipment, metal cutting and forming machines, hoisting and rigging equipment. Some of the equipment can weigh up to 50 lbs. Typically the technician is lifting and carrying power tools, drills and hand tools weighing up to 20 lbs.
• Carrying - carries tool kits and calibrating equipment weighing up to 30 lbs., extension ladders
• Pushing/Pulling - minimal
• Climbing - steel ladders (occasional)
• Balancing - good balance is required during ladder climbing, bucket truck work
• Bending - dependent on the maintenance job being performed; the jobs vary from day to day
• Kneeling - occasional
• Crawling - not required
• Reaching - full ROM of UE required
• Handling- good manual dexterity required in repair of circuits, pumps, motors, and working with hand tools and testing equipment
• Squatting - occasional
• Sitting - occasional

RESPONSIBILITIES

• Must demonstrate the ability to comply with all Century Aluminum and plant PPE requirements and safety protocols.
• Must possess the skills and abilities to work autonomously while conducting routine electrical tasks.
• Familiar with the handling, operation and safe use of all types of electrical equipment including motors, generators, transformers, rectifiers, switches, circuit breakers, relay, control equipment, communication equipment, electronic and fluid controls, power generation, transmission and distribution system, instruments, panel boards, replacement parts and supplies, wire and cable, insulating materials, solder, paint, etc.
• Safe and efficient use of electrical maintenance tools and equipment including electrical testing and measuring equipment. Conduit bending and threading equipment, ladders and scaffolding, vibration analyzers, soldering equipment, metal cutting and forming machines, hoisting and rigging equipment. Hand and power tools common to the trade.
• Read and work from blueprints, sketches, charts, manuals, wiring and schematic diagrams, and other information and instructions. Maintains records and makes reports as necessary.
• Fabricate, install, troubleshoot, dismantle, repair, assemble, inspect, test, maintain, lubricate and operate all electrical and electronic equipment and components, air conditioning equipment, fluid controls, cranes, lighting systems and battery powered equipment.
• Use burning, cutting, welding, soldering, and brazing equipment as required.
• Operate cranes, mobile equipment, and erects and disassembles scaffolding in conjunction with repair work.
• Paint in conjunction with repair work.
• Actively participate in crew and plant safety programs.
• Assist in warehouse parts and inventory control.
• Assist in the upgrade of PM's and lubes through planning.
• Participate in out-of-schedule working hours, i.e.; fill-ins, breakdowns and overhauls.
• Work rotating shifts.
• Maintain job continuity.
• Communicate freely with the technician/supervisor.
• Utilize computer systems, i.e.; daily time entries in Oracle, functions of the CMMS System.
• Continue to upgrade oneself through education/skills associated with their trade.
• Maintain personal and company tools in a safe and usable condition at all times.
• This position reports to a Maintenance Supervisor.

SPECIFIC DUTIES FOR SHIFT MAINTENANCE WORKERS

• Exercise extreme caution while working alone on many tasks
• Assist other maintenance shift workers throughout the plant in repair efforts to minimize call-ins of day shift personnel
• Assist assigned crew with execution of planned activities such as PM's, lubes, or standing work orders as assigned by the maintenance supervisor
• Understand and activate the "Maintenance Help Chain" as necessary to prevent excessive production interruptions
• Prioritize work requests or have the Potline Supervisor prioritize requests in the event of multiple requests simultaneously
• Assess non-routine breakdown situations and recommend necessary resources when help is required
• Provide accurate feedback to the appropriate maintenance personnel regarding turnover information on breakdowns and trouble calls
• Practice established maintenance process techniques at all times, some examples include accurate and detailed information on work orders, applying parts removal tags on rebuild items, immediately return to stock warehouse issues that are not needed, proper coding of emergency work orders, all stock issues are charged to work orders

BENEFITS

• Medical, Dental, Vision, Life, Voluntary Benefits, Disability
• Company-paid holidays
• Accrued vacation
• Employee Assistance Program
• 401K with up to 6% company match
• Onsite Gym
• Wellness programs
• Employee recognition incentives

Environmental, Health & Safety:

This position requires awareness of the Mt. Holly Environmental Policy, Mt. Holly Waste Minimization Policies and Environment, Health and Safety Policy/Principles. must be knowledgeable of the environmental aspects of processes, activities and services in job area and appropriate measures to control impact on the environment.

Support plant policies for waste minimization, demonstrate knowledge of the environmental aspects of the job and effectively employ standard methods to control impact of work on the environment to prevent pollution. Support department environmental objectives and plant environmental goals.

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Supplier Development Engineer at Reliable Robotics, you'll play a critical role in developing and continuously improving all aspects of our mechanical supplier engineering processes to meet design, regulatory, and business requirements (including safety, quality, cost, and on-time delivery). This is a growing team of highly motivated people passionate about delivering quality products and services on time, with unquestionable value. You will be responsible for sourcing, qualifying, and troubleshooting all machining and sheet metal products, conducting design for excellence (DFx) reviews, and developing the processes and infrastructure to help the business scale. The projects you work on will set the foundation for how the business operates for years to come. This is a fantastic opportunity to work in a safety-critical environment that takes automated aviation systems from prototype to production in a hands-on environment.

Responsibilities

• Develop and manage supplier relationships to ensure they meet or exceed manufacturing, testing, inspection, quality, performance, and reliability requirements

• Develop design for excellence (DFx) processes, and conduct reviews to evaluate designs for cost, producibility, inspectability, consistency, adequacy, accuracy, and conformance to requirements

• Develop supplier qualification processes and conduct regular reviews

• Collaborate with design, quality, and certification teams to embed producibility/manufacturability, compliance, and risk mitigation in all phases of product development (e.g., prototype, R&D, certification, and production)

• Develop quality control plans and inspection infrastructure, including dimensional inspection and functional testing

• Develop and ensure compliance with all policies, procedures, quality management systems, and engineering change orders

• Develop processes to ensure accurate, current, and complete documentation (work instructions, inspections, tests, records, etc.) is utilized and maintained

• Lead root-cause analysis and implement timely corrective actions to maintain schedule, quality, and reliability

Basic Success Criteria

• Bachelor's degree in mechanical, aerospace engineering, or a related field of study

• 5+ years of manufacturing, design, and/or testing experience

• 2+ years of experience with computer-aided design (CAD) and Product Lifecycle Management (PLM) software, such as NX and Teamcenter

• Geometric Dimensioning and Tolerancing (GD&T) experience

• Coordinate Measuring Machine (CMM) experience

Preferred Success Criteria

• Experience with CNC machinery (lathe, mill, waterjet, laser cutter, EDM)

• Precision sheet-metal or plastic molding tooling design experience

• Experience with industry or regulatory requirements such as AS9100, CFR 14 CFR 21.137, and/or 14 CFR Part 145

• Research and Development (R&D) or New Product Introduction (NPI) experience

• Previous leadership or management experience

• Prior experience in troubleshooting, repairing, setting up, and operating complex hardware in a safety-critical environment

Our team is passionate about delivering on our commitments, solving hard problems, continuously improving, and helping the business succeed. We are constantly reevaluating our technologies, products, and capabilities. If you are a lifelong learner, you will love this environment. Get in on the ground floor and help us build the company.

This role will be located at our facility in Mountain View, California.

Must be willing to travel 25% of the time.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $132K - $200K

BACKGROUND

The National Biodefense Analysis and Countermeasures Center (NBACC) is a one-of-a-kind facility located on Fort Detrick in Frederick MD and is dedicated to defending the nation against biological threats. Its work supports DHS and National biodefense preparedness planning, response, emerging threat characterization and bioforensic analyses. It is the first national laboratory created by DHS in response to biodefense gaps identified following the Amerithrax attacks of 2001 and has been operated by the Battelle National Biodefense Institute (BNBI) since 2006. Since its inception, NBACC and its staff have filled critical shortfalls in our scientific knowledge of biological agents needed to protect the public and defend the Nation from biological threats, whether naturally occurring, accidental, or deliberate and provided federal law enforcement with scientific data to support the investigation and attribution of biocrimes and protection of the US bioeconomy.

NBACC includes two centers: the National Bioforensic Analysis Center (NBFAC), which conducts the technical analyses in support of federal law enforcement investigations, and the National Biological Threat Characterization Center (NBTCC), which conducts experiments and studies to obtain data required for a better understanding of biological vulnerabilities and hazards. Together these centers offer a unique national resource for understanding the risks posed by biological agents and emerging technologies to inform biodefense policy and response planning and the operational capability to support the investigation, prosecution, and prevention of biocrimes and bioterrorism.

PRIMARY FUNCTION

As part of the NBACC Aerobiology Team, the Research Associate works with an interdisciplinary team of scientists in the NBTCC to develop, manage, and analyze research projects focused on characterization of the physical, biological and/or pathogenic properties of infectious biological aerosols in order to address specific scientific questions of national significance in support of biodefense preparedness, response and recovery planning.

MINIMUM REQUIRED QUALIFICATIONS

• Bachelor of Science (or equivalent) in a scientific discipline or engineering, and a minimum of 4 years of related experience.
• Relevant experience related to the use of aerosol generation and sampling equipment, including air flow measurement, conditioning of air flows, sampler collection efficiency assessment, and/or particle size measurement.
• Experience with statistics is also desirable.
• Experience utilizing LabView, or related software/hardware, for control of laboratory equipment/processes is desirable.
• Intermediate scientific proficiency in laboratory functions. Possesses the ability to identify issues with laboratory protocols, procedures, and experimental plans.
• Proficiency and clarity of oral and written communications are essential.
• Exemplary organizational skills with a proven track record of working effectively both independently and as a team player.
• Knowledge or experience with biocontainment facilities and procedures, laboratory safety, biosurety, and decontamination is desirable.
• Skills and experience to support laboratory activities and work in accordance with NBACC's management system (e.g., ISO).
• Must be a citizen of the United States, able to obtain and maintain an interim secret clearance leading to a top-secret clearance, suitability for DHS, and a favorable adjudication of the Department of Justice (DoJ) for select agent access.
• Participation in the Immunization Program, Medical Surveillance Program, and enrollment in the Personnel Reliability Program (PRP) is required.
• May be required to participate in NBACC's alternative work and/or on-call schedule, dependent upon business needs.

PRIMARY RESPONSIBILITIES

• Leverages experience to support the design and execution of studies related to the sampling of infectious biological aerosols.
• Participates in the testing and evaluation of new technologies and protocols to improve the group's ability to serve its customers.
• Possesses the ability to work on multiple science tasks simultaneously, while performing assignments outside of area of expertise.
• Exercises judgment within generally defined practices and policies in selecting methods and techniques for obtaining solutions.
• Follows established procedures on routine work, requires instruction only on new assignments, and is self-sufficient in monitoring and reporting on quality, and compliance.
• Participates in the testing and evaluation of new technologies and protocols including writing and updating NBACC Standard Operating Procedures (SOPs), work instructions and forms to improve NBACC's ability to serve its customers.
• Identifies departures from the Quality Management System (QMS) and initiates actions to investigate and prevent such occurrences.
• With minimal supervision, operates, maintains, and characterizes the performance of equipment ensuring the reagents and supplies are maintained and used properly.
• Serves as a member of a team in developing, validating, and maintaining methods for identifying and characterizing biological threat agents.
• Must be a team player, communicate clearly, be open to hearing ideas and suggestions from others, diffuse situations, and exercise empathy and patience with colleagues.
• Must have the ability to multi-task, maintain composure under pressure, and utilize effective time management skills to prioritize tasks.
• Must be a self-starter driven by an eagerness to succeed, maintain flexibility, adapt to change in a productive and positive manner, learn new concepts, and utilize critical thinking to resolve complex problems.
• Maintains appropriate records.
• Performs other duties as assigned/authorized.

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Sr. Manufacturing Engineer (Mechanical) at Reliable Robotics, you'll play a critical role in developing and continuously improving all aspects of our manufacturing, installation, and supply chain processes to meet design, regulatory, and business requirements (including safety, quality, cost, and on-time delivery). This is a growing team of highly motivated people passionate about delivering quality products and services on time, with unquestionable value. You will be responsible for designing the build and installation process for mechanical, electromechanical, and/or electrical/avionics products, conducting design for excellence (DFx) reviews, and developing the processes and infrastructure to help the business scale. The projects you work on will set the foundation for how the business operates for years to come. This is a fantastic opportunity to work in a safety-critical environment that takes automated aviation systems from prototype to production in a hands-on environment.

Responsibilities

• Responsible for building, installing, testing, diagnosing, inspecting, and maintaining Reliable-designed mechanical, electromechanical, and/or electrical/avionics assemblies, harnesses, interconnects, and other commercial-off-the-shelf (COTS) products

• Conduct design for excellence (DFx) reviews to evaluate designs for cost, producibility, inspectability, consistency, adequacy, accuracy, and conformance to requirements

• Collaborate with design, quality, and certification teams to embed manufacturability, compliance, and risk mitigation in all phases of product development (e.g., prototype, R&D, certification, and production)

• Develop and ensure compliance with all policies, procedures, quality management system, and engineering change orders

• Develop processes to ensure accurate, current, and complete documentation (work instructions, inspections, tests, records, etc.) is utilized and maintained

• Lead root-cause analysis and implement timely corrective actions to maintain schedule, quality, and reliability

Basic Success Criteria

• Bachelor's degree in mechanical, electrical, aerospace, or systems engineering

• 7+ years of manufacturing, design, and/or testing experience

• 2+ years of experience with computer-aided design (CAD) and Product Lifecycle Management (PLM) software, such as Altium, NX, and Teamcenter

Preferred Criteria

• Research and Development (R&D) or New Product Introduction (NPI) experience

• Experience with industry or regulatory requirements such as AS9100, CFR 14 CFR 21.137, and/or 14 CFR Part 145

• Previous leadership or management experience

• Prior experience in troubleshooting, repairing, setting up, and operating complex hardware in a safety-critical environment

Our team is passionate about delivering on our commitments, solving hard problems, continuously improving, and helping the business succeed. We are constantly reevaluating our technologies, products, and capabilities. If you are a lifelong learner, you will love this environment. Get in on the ground floor and help us build the company.

The position will be located at our facility in Mountain View, California.

Must be willing to travel 10% of the time.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $167K - $230K